Philips 32PFL3606H/12 User manual

Register your product and get support at
www.philips.com/welcome
47PFL4606H
42PFL4606H
42PFL4506H
42PFL3606H
42PFL3506H
40PFL5606H
37PFL4606H
32PFL5606H
32PFL5406H
32PFL4606H
32PFL3606H
32PFL3506H
32PFL3406H
EN User manual
Downloaded From TV-Manual.com Manuals
Contact information
België/ Belgique
0800 80 190 Gratis/Gratuit
ß CHAT www.philips.com/support
00800 11 544 24
800 142 840 Bezplatný hovor
3525 8759 Lokalt opkald
ß CHAT www.philips.com/support
0800 000 7520 (kostenfrei)
ß CHAT www.philips.com/support
!"#
0 0800 3122 1280
$%
900 800 655 Teléfono local gratuito
solamente para clientes en España
ß CHAT www.philips.com/support
$&
8000100288 kohalik kõne tariifi
'
0805 025 510 numéro sans frais
ß CHAT www.philips.com/support
()
0800 222778 free
*
South: 1 800 7445477
North: 0 800 331 6015
*
800 088774 Numero Verde
+,-012
+7 727 250 66 17 local
3)
80002794 local
E)5
08 5792 9100 Lokalsamtal
3
880030483 local
E6EG96E)99
0800 002 050
Schweizer Festnetztarif/ Tarif réseau
fixe France
345634&5
080026550
Ortsgespräch/Appel local
758&95
06 80 018 189 Ingyenes hívás
:
0800 023 0076 Gratis nummer
:&5
22 70 81 11 Lokalsamtale
E&
09 2311 3415 paikallispuhelu
HI8
!"!!#$%&&!#'*,;<;=;><>?>
JK5&
0870 911 0036 toll free
LMN20OM
0-800-500-697
;
0800 180 016
<&
00800 3111 318
<&5
0800 780 902 Chamada Grátis
=>00
(495) 961 1111
8800 200 0880
?&@
0800-894910 Apel gratuit
0318107125 Apel local
ACD
+381 114 440 841 Lokalni poziv
E&)&
0800 004537 Bezplatný hovor
E&)F
080080254 lokalni klic
This information is correct at the time of print. For updated information, see www.philips.com/support.
Downloaded From TV-Manual.com Manuals
1 Notice
2
2 Important
4
3 Your TV
7
7
8
9
TV controls
Remote control
Remote control usage
4 Use your TV
Switch your TV on
Switch your TV to standby
Switch your TV off
Switch channels
Watch connected devices
Adjust TV volume
Use teletext
5 Use more of your TV
Access TV menus
Add device to the home menu
Rename devices from the home menu
Remove devices from the home menu
Change picture and sound settings
Use the universal access menu
Use advanced teletext features
Create and use lists of favourite
channels
Use the Electronic Programme Guide
Display the TV clock
Use timers
Lock unsuitable content
View Scenea
Change language
Play photos, music and videos on USB
storage devices
Listen to digital radio channels
Update the TV software
Change TV preferences
Start a TV demo
Reset the TV to factory settings
Downloaded From TV-Manual.com Manuals
10
10
11
11
11
12
13
13
14
14
14
14
15
15
18
19
20
21
22
23
23
24
25
31
31
32
32
33
33
33
Automatically install channels
Manually install channels
Rename channels
Rearrange channels
Test digital reception
Access CAM services
7 Connect devices
34
34
36
37
38
39
42
Back connections
Side connections
Connect a computer
Use a Conditional Access Module
Use Philips EasyLink
Use a Kensington lock
8 Product information
43
43
43
43
43
43
44
^^
Supported display resolutions
Multimedia
Tuner/Reception/Transmission
Remote control
Power
Supported TV mounts
D<JQWXYZ[*X;\X>Y;J]
9 Troubleshooting
46
46
46
47
47
47
48
48
General TV issues
TV channel issues
Picture issues
Sound issues
HDMI connection issues
Computer connection issues
Contact us
10 Index
49
26
28
28
30
30
30
EN
1
Engl i s h
6 Install channels
Contents
1 Notice
2011 © Koninklijke Philips Electronics N.V. All
rights reserved.
[*X;\X>Y;J]Z><*ZW‚ƒ*XYYJX,>]*„;Y,JWY
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
Y,JZ*Z[*X;\*Q,*<*;]…XJ]\<?>Y;J]J|Y,*;<
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Terms of warranty
† Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV
yourself.
† Use the TV and accessories only as
intended by the manufacturer.
† The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
†
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
2
EN
Downloaded From TV-Manual.com Manuals
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the Electro Magnetic Field (EMF) standards
applicable at the time of producing the
products.
Philips is committed to develop, produce and
market products that cause no adverse health
*||*XYZ}D,;~;[ZXJ]\<?ZY,>Y;|;YZ[<JQWXYZ><*
handled properly for their intended use, they
><*Z>|*YJWZ*>XXJ<Q;]YJZX;*]Y;\X*€;Q*]X*
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
1
2
Remove fuse cover and fuse.
3
*\YY,*|WZ*XJ€*<}
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
Copyright
Engl i s h
Mains fuse (UK only)
,;ZŽ;Z\YY*Q„;Y,>]>[[<J€*Q?JW~Q*Q
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
Manufactured under licence from Dolby
Laboratories. Dolby and the double D symbol
are trademarks of Dolby Laboratories.
ˆ‰Š‹…Y,*ˆ‰Š‹~JJ>]Qˆ;,Œ‰*\];Y;J]
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
All other registered and unregistered
trademarks are the property of their respective
owners.
Downloaded From TV-Manual.com Manuals
EN
3
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
?&„&&…†
† Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
† Never place the TV, remote control or
‚>YY*<;*Z]*><]>”*Q’>?*ZJ<JY,*<,*>Y
sources, including direct sunlight.
J[<*€*]YY,*Z[<*>QJ|\<*…”**[
X>]Q~*ZJ<JY,*<’>?*Z>„>‘|<J?Y,*
TV, remote control and batteries at all
times.
†
Never insert objects into the ventilation
slots or other openings on the TV.
† When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
?&„&&…†
† Never expose the remote control or
batteries to rain, water or excessive heat.
† Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
\<*}
4
EN
Downloaded From TV-Manual.com Manuals
Risk of injury or damage to the TV!
† Two people are required to lift and carry
a TV that weighs more than 25 kg or 55
lbs.
† When stand mounting the TV, use only
the supplied stand. Secure the stand to
Y,*ŽY;,Y~‘}D~>X*Y,*ŽJ]>’>Y…~*€*~
surface that can support the combined
weight of the TV and the stand.
† When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
† Parts of this product may be made of
glass. Handle with care to avoid injury
and damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
† Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
† Ensure that no part of the TV hangs over
the edge of the surface.
† Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
† Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
† The product/remote control may
contain a coin-type battery, which can be
swallowed. Keep the battery out of reach
of children at all times!
Risk of overheating!
† “*€*<;]ZY>~~Y,*Ž;]>XJ]\]*QZ[>X*}
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Downloaded From TV-Manual.com Manuals
Screen care
†
†
†
†
†
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
EN
5
Engl i s h
Risk of damage to the TV!
† Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
?&„F8‡…&&G&5†
† Never place the TV or any objects on the
power cord.
† To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
† When you disconnect the power cord,
always pull the plug, never the cable.
† Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
† Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
† If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environment and human
health.
6
EN
Downloaded From TV-Manual.com Manuals
Environmental efforts
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
ZW‚ZY>]X*Z…*]*<‘Œ*|\X;*]YWZ*…*]QŒJ|Œ~;|*
instructions and product recycling.
J>XX*ZZ*]*<‘Œ*|\X;*]YZ*YY;]Z•
1
While you watch TV, press the green
button on the remote control.
2
Select one of the following settings:
† [Energy saving]: Picture settings that
conserve the most energy.
† [Mute screen]: If you only want to
listen to audio from the TV, you
can turn off the TV display. Other
functions continue to operate
normally.
† [Light sensor]: The built-in ambient
light sensor lowers the brightness of
the TV screen when the surrounding
light darkens.
† [Switch off unused sources]: If you
connect EasyLink-compliant devices,
you can switch them off.
For xxPFL4xx6
Engl i s h
3 Your TV
Congratulations on your purchase, and
„*~XJ?*YJD,;~;[Z—J|W~~‘‚*]*\Y|<J?Y,*
support that Philips offers, register your TV at
www.philips.com/welcome.
TV controls
For xxPFL5xx6
1
a
2
3
4
+/-: Adjust volume.
b
(Power): Switch the TV on or off.
c
(Home): Access the home menu.
d CH +/-: Switch channels.
1
2
3
4
For xxPFL3xx6
1
a
b
+/-: Adjust volume.
2
(Home): Access the home menu.
c CH +/-: Switch channels.
3
d Power: Switch the TV on or off.
4
a
b
+/-: Adjust volume.
(Home): Access the home menu.
c CH +/-: Switch channels.
d
Downloaded From TV-Manual.com Manuals
(Power): Switch the TV on or off.
EN
7
f
Remote control
†
SOURCE
Select connected devices.
g
†
1
Mute or restore audio.
h +/† Adjust volume.
2
17
i 0-9 (Numeric buttons)
† Select channels.
16
15
14
j SUBTITLE
† Enable or disable subtitles.
5
13
6
7
l
12
3
4
k TEXT
† Enable or disable teletext.
†
OPTIONS
Access options for the current
activity or selection.
m
8
†
9
Return to the previous menu or exit
a function.
n OK
† ˜J]\<?>]*]Y<‘J<Z*~*XY;J]}
10
11
o
†
p
†
a
†
(Standby-On)
Switch the TV on or to standby.
b Play buttons
† Control video or music.
c
†
d
†
e
†
8
FIND
Access the menu to select a TV
channel list.
(Home)
Access the home menu.
CH - / CH + (Previous/Next)
Switch channels or navigate through
menu pages, tracks, albums or
folders.
EN
Downloaded From TV-Manual.com Manuals
(Navigation buttons)
Navigate through menus and select
items.
ADJUST
Access the menu to adjust settings.
q Colour buttons
† Select tasks or options.
Engl i s h
Remote control usage
When you use the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control and TV is not blocked by
furniture, walls or other objects.
For xxPFL5xx6 and xxPFL4xx6
~5m
~30˚
For xxPFL3xx6
~5m
~30˚
Downloaded From TV-Manual.com Manuals
EN
9
4 Use your TV
For xxPFL4xx6
This section helps you perform basic TV
operations.
Switch your TV on
†
Press the power switch on the TV.
» There is a short delay before the TV
responds.
For xxPFL5xx6
For xxPFL3xx6
If the TV is in standby
†
10
EN
Downloaded From TV-Manual.com Manuals
Press (Standby-On) on the remote
control.
Switch channels
†
†
Press CH+ or CH- on the remote
control.
†
Press CH +/- on the TV.
Press (Standby-On) on the remote
control again.
» The remote control sensor on the TV
switches to red.
Engl i s h
Switch your TV to standby
Switch your TV off
†
Press the power switch on the TV again.
» The remote control sensor on the TV
switches off.
» For xxPFL5xx6, the TV no longer
consumes energy.
» For xxPFL4XX6 and xxPFL3xx6,
though the TV consumes very little
power when in standby, energy
continues to be consumed. When not
in use for an extended period of time,
disconnect the TV power cable from
the power outlet or turn off the power
switch.
For xxPFL5xx6 and xxPFL4xx6
Note
† If you cannot locate your remote control and
want to switch on the TV from standby, press
CH+/- on the TV.
For xxPFL3xx6
Downloaded From TV-Manual.com Manuals
EN
11
Other ways to switch channels
†
†
Enter a channel number using the
Numeric buttons.
Press
(BACK) on the remote control
to return to the previous channel.
Watch connected devices
Note
† Before you select a device as a source, switch
the device on.
Note
† When you use a favourite list, you can only
select those channels in the list (see ‘Create
and use lists of favourite channels’ on page 20).
Select a device from the source list
1
Press
SOURCE.
View channel preview
You can view a preview of all available
channels with the channel grid.
† Press FIND.
» The channel grid appears.
» To preview a channel, select it.
» To watch a channel, select it, then press
OK.
12
EN
Downloaded From TV-Manual.com Manuals
» The source list appears.
2
3
Press
to select a device.
Press OKYJXJ]\<?‘JW<X,J;X*}
» The TV switches to the selected
device.
Use teletext
†
Press +/- on the remote control.
1
†
Press
+/- on the TV.
For xxPFL5xx6 and xxPFL4xx6
Engl i s h
Adjust TV volume
Press TEXT.
» The main index page appears.
2
Select a page with one of the following:
† Press the Numeric buttons to enter
a page number.
† Press or to view the next or
previous page.
† Press the Colour buttons to select a
colour coded item.
† Press
(BACK) to return to a
previously viewed page.
3
Press TEXT to exit teletext.
Note
† For UK users only: Some digital TV channels
offer dedicated digital text services (for
example, BBC1).
For xxPFL3xx6
To mute or unmute sound
†
†
Press
Press
to mute the sound.
again to restore the sound.
Downloaded From TV-Manual.com Manuals
EN
13
5 Use more of
your TV
Add device to the home
menu
Access TV menus
1
2
3
Press
4
To watch the device, switch it on, then
select it in the home menu.
5
You can also select the device with the
source button (see ‘Select a device from
the source list’ on page 12).
Menus help you to install channels, change
picture and sound settings and access other
features.
1
Press .
The menu screen appears.
After you connect a device, add it to the home
menu.
.
Select [Add new device].
Follow the onscreen instructions to add
the device to the home menu.
» The device is displayed in the home
menu.
Rename devices from the
home menu
2
3
14
Select one of the following, then press
OK.
† [Watch TV]: If a source other than
antenna is selected, switch back to
the antenna source
† [Add new device]: Add new devices
to the home menu.
† [Setup]: Access menus to change
picture, sound and other settings.
† [Programme guide]: Access the
electronic programme guide.
† [Scenea]: Switch on Scenea
wallpaper.
† [Help]: Access the TV tour.
After you add a new device to the home menu,
you can rename it to your preference.
4
Select [Rename device], then press OK.
» A text input box appears.
Press
5
Select characters each character, then
press OKYJXJ]\<?}
† Press [Aa] to change an uppercase
letter to a lowercase letter and vice
versa.
6
When the new name is complete, select
[Done], then press OK.
EN
to exit.
Downloaded From TV-Manual.com Manuals
Note
† The device name can be up to 16 characters
long.
1
2
3
Press
.
Select a device to rename.
Press
OPTIONS.
» The options menu appears.
Remove devices from the
home menu
Use smart picture
If a device is no longer connected to the TV,
remove it from the home menu.
1
2
3
1
2
3
4
5
Press
.
Select a device to remove.
Press
OPTIONS.
Select [Remove device], then press OK.
Select [Remove], then press OK.
» The selected device is removed from
the home menu.
Change picture and sound
settings
Change picture and sound settings to suit your
[<*|*<*]X*Z}œJWX>]>[[~‘[<*ŒQ*\]*QZ*YY;]Z
or change settings manually.
Note
Press
Engl i s h
›Z*Z?><Y[;XYW<*YJ>[[~‘[<*ŒQ*\]*Q
picture settings.
ADJUST.
Select [Smart picture], then press OK.
Select one of the following settings, then
press OK.
† [Personal]: Apply your customised
picture settings
† [Vivid]: Rich and dynamic settings,
ideal for daytime.
† [Natural]: Natural picture settings.
† [Cinema]: Ideal settings for movies.
† [Game]: Ideal settings for games.
† [Energy saving]: Settings that
conserve the most energy.
† [Standard]: Default settings that suit
most environments and types of
video.
† [Photo]: Ideal settings for photos.
† [Custom]: Customise and store your
personal picture settings. Select
[Personal] to apply these settings.
† While you watch TV or external devices, press
ADJUST, then select [Smart picture] or
[Smart sound] for quick access to picture and
sound settings.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1
2
Press
.
Select [Setup] > [Quick picture and
sound settings], then press OK.
3
Select [Continue], then press OK.
» The [Settings assistant] menu appears.
4
Follow the onscreen instructions to
choose your preferred picture settings.
Downloaded From TV-Manual.com Manuals
EN
15
†
Manually adjust picture settings
1
2
3
†
†
†
†
†
†
†
†
†
†
†
16
Press
.
Select [Setup] > [TV settings] >
[Picture], then press OK.
Select one of the following settings, then
press OK.
[Smart picture]•žXX*ZZ[<*Q*\]*QZ?><Y
picture settings.
[Reset]: Reset to factory default settings.
[Contrast]: Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
[Brightness]: Adjust the intensity and
details of dark areas.
[Colour]: Adjust colour saturation.
[Hue]: Compensate for colour variations.
[Sharpness]: Adjust sharpness in the
image.
[Noise reduction]: Filter and reduce
noise in an image.
[Tint]: Adjust the colour balance in an
image.
[Custom tint]: Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
[Digital Crystal Clear]/[Pixel Plus]/[Pixel
Plus HD]: Fine-tune each pixel to match
surrounding pixels. This setting produces
>‚<;~~;>]Y…,;,ŒQ*\];Y;J];?>*}
† [HD Natural Motion]: (For Pixel Plus
HD) Minimise juddering effects and
enhance picture smoothness.
† [100Hz Clear LCD]: (For Pixel Plus
HD) Reduce motion blurring and
make picture more clear.
† [Advance sharpness]: Enable
superior picture sharpness.
† [Dynamic contrast]: Enhance
contrast. [Medium] setting is
recommended.
† [Dynamic backlight]: Adjust
brightness of the TV backlight to
match lighting conditions.
EN
Downloaded From TV-Manual.com Manuals
†
†
†
†
†
[MPEG artifact reduction]: Smooth
out transitions on digital pictures.
You can switch this feature on or off.
† [Colour enhancement]: Make
colours more vivid and improve the
details in bright colours. You can
switch this feature on or off.
† [Gamma]: Adjust the midtone
intensity in the picture. Black and
white are not affected.
[PC mode]: Adjust the picture when a PC
is connected to the TV via HDMI or DVI.
[Light sensor]: Adjust settings dynamically
based on the current lighting conditions.
[Picture format]: Change the picture
format.
[Screen edges]: Adjust the viewing area.
(when set to maximum, you may see
noise or the rough edge of an image).
[Picture shift]: Adjust the picture position
for all picture formats except for [Auto
zoom] and [Wide screen].
Change picture format
1
2
3
Press
ADJUST.
Select [Picture format], then press OK.
Select a picture format, then press OK.
Summary of picture formats
The following picture settings can be
XJ]\W<*Q}
Note
† Depending on the format of the picture
source, some picture settings are not available.
Use smart sound
›Z*Z?><YZJW]QYJ>[[~‘[<*ŒQ*\]*QZJW]Q
settings.
1
2
3
Press
ADJUST.
Select [Smart sound], then press OK.
Select one of the following settings, then
press OK.
† [Personal]: Apply the settings that
were customised in the sound menu.
† [Standard]: Settings that suit most
environments and types of audio.
† [News]: Ideal settings for spoken
audio, such as news.
† [Cinema]: Ideal settings for movies.
† [Game]: Ideal settings for games.
† [Drama]: Ideal settings for drama
programmes.
† [Sports]: Ideal settings for sports
programmes.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scale 4:3 format
to 16:9.
[Wide screen]: Scale 4:3
format to 16:9.
[Unscaled]: For HD
and PC mode only,
and in selected models
only. Allow maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
Downloaded From TV-Manual.com Manuals
EN
17
Engl i s h
[Auto format]: For
selected models. (Not for
PC mode.) Automatically
display the suitable picture
format. If not, widescreen
is applied.
˜™&…š: : For selected
models. Adjust the
[;XYW<*YJ\~~Y,*ZX<**]
(subtitles remain visible).
Recommended for
minimal screen distortion
but not for HD or PC.
[Auto zoom]: For selected
models. Enlarge the
[;XYW<*YJ\~~Y,*ZX<**]}
Recommended for
minimal screen distortion
but not for HD or PC.
[Super zoom]: (Not
for HD and PC mode.)
Remove the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[4:3]: Show the classic 4:3
format.
Manually adjust sound settings
1
2
3
†
†
†
†
†
†
†
†
†
†
†
Press
.
Select [Setup] > [TV settings] > [Sound],
then press OK.
» The [Sound] menu appears.
Select one of the following settings, then
press OK.
[Smart sound]•žXX*ZZ[<*Q*\]*QZ?><Y
sound settings.
[Reset]: Reset to factory default settings.
[Clear sound]: Enhance the sound clarity.
[Bass]: Adjust the bass level.
[Treble]: Adjust the treble level.
[Surround]: Switch on spatial sound.
[Incredible Surround]: (For selected
models) Enhanced spatial sound for
increased surround effect.
[Headphone volume]: (For models with
headphones) Adjust headphone volume.
[Auto volume levelling]: Automatically
reduce sudden volume changes, for
example when switching channels.
[Balance]: Adjust the balance of the right
and left speakers.
[Digital output format]: Select the type
of digital audio output through digital
audio output connector.
† [PCM]: Convert non-PCM audio
type to PCM format.
† [Multichannel]: Output audio to the
home theatre.
Use the universal access
menu
You can activate the universal access menu
QW<;]Y,*\<ZY;]ZY>~~>Y;J]}Ÿ]X**]>‚~*Q…‘JW
can quickly access the visually impaired and
hearing impaired menus when watching TV or
external devices.
1
While you watch TV, press
OPTIONS.
» The TV options menu appears.
2
3
Select [Universal access], then press OK.
†
†
†
†
Select one of the following options, then
press OK.
[Hearing impaired]: Enable or disable
hearing impaired subtitles.
[Visually impaired]: Some digital TV
channels broadcast special audio adapted
for people who are visually impaired.
The normal audio is mixed with extra
commentary. Use the colour buttons to
select the options:
† Red ([Off]): Turn off visually
impaired audio.
† Green ([Speakers]): Hear visually
impaired audio from speakers only
† Yellow ([Headphone]): Hear visually
impaired audio from headphones
only.
† Blue ([Speaker + headphone]): Hear
visually impaired audio from both
speakers and headphone.
[Mixed volume]: Adjust the volume of
visually impaired audio.
[Key beep]: Switch on audio feedback
when buttons are pressed on the remote
control or TV.
Tip
† Press the colour buttons on the remote
control to enter the options.
18
EN
Downloaded From TV-Manual.com Manuals
Access the teletext options menu
2
3
A teletext page can contain several subpages.
Subpages are displayed next to the main page
number.
1
Press TEXT.
» The teletext screen appears.
Press TEXT.
» The teletext screen appears.
2
3
Press
or
Press
or
Press
OPTIONS.
» The teletext options menu appears.
Select T.O.P. teletext broadcasts
Access the teletext features through the
teletext options menu.
1
Select teletext subpages
Select one of the following options, then
press OK.
† [Freeze page] / [Unfreeze page]:
Freeze/unfreeze the current page.
† [Dual screen] / [Full Screen]: Switch
between full screen and dual screen
teletext.
† [T.O.P. overview]: Switch on Table
of Pages teletext broadcasts
† [Enlarge] / [Normal view]: Switch
between enlarged and normal view
of teletext pages.
† [Reveal]: Hide or reveal hidden
information on a page, such as
solutions to riddles or puzzles.
† [Cycle subpage]: If subpages are
available, automatically display each
subpage in sequence.
† [Languages]: Select a language for
teletext.
to enter a subpage.
Jump from one subject to another without
entering page numbers with Table Of Pages
(T.O.P.) teletext broadcasts. T.O.P. teletext
broadcasts are available on selected TV
channels.
1
Press TEXT.
» The teletext screen appears.
2
3
Press
4
5
Select a subject.
OPTIONS.
Select [T.O.P. overview], then press OK.
» The T.O.P. overview appears.
Press OK to view the page.
Use Teletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on by
default.
1
2
3
Downloaded From TV-Manual.com Manuals
to select a teletext page.
Press
.
Select [Setup] > [TV settings] >
[Preferences] > [Teletext 2.5].
Select [On] or [Off], then press OK to
XJ]\<?}
EN
19
Engl i s h
Use advanced teletext
features
Create and use lists of
favourite channels
View all channels
You can create a list of your preferred TV
X,>]]*~ZZJY,>Y‘JWX>]\]QY,JZ*X,>]]*~Z
easily.
1
While you watch TV, press FIND.
» The channel matrix menu is displayed.
2
3
Press
View only the list of favourite
channels
1
While you watch TV, press FIND.
» The channel matrix menu is displayed.
2
3
Press
You can exit the favourites list, and view all
installed channels.
Note
† All favourite channels are marked by an
asterisk when you view the channel grid.
Manage the favourites list
1
While you watch TV, press FIND.
» The channel matrix menu appears.
2
3
Press
4
5
Press
† The favourites channel grid is empty until you
add channels into the favourites list.
Select [Select list] > [All], then press
OK.
» All channels are displayed in the
channel grid.
Note
OPTIONS.
Select [Select list] > [Favourites], then
press OK.
» Only channels in the favourites list
appear in the channel grid.
OPTIONS.
OPTIONS.
Select [Select list] > [All], then press
OK.
OPTIONS.
Select [Mark as favourite] or [Unmark as
favourite], then press OK.
» The channel is added or removed from
the favourite list.
Note
† All favourite channels are marked by an
asterisk in the channel grid.
20
EN
Downloaded From TV-Manual.com Manuals
The programme guide is an on-screen guide
available for digital channels. It allows you to:
† View a list of digital programmes being
broadcast
† View upcoming programmes
† Group programmes by genre
† Set reminders when programmes start
† Setup preferred programme guide
channels
Switch on EPG
1
2
Press
.
Select [Programme guide], then
pressOK.
» The programme guide appears
displaying information about the
scheduled programmes.
Note
† Programme guide data is available only in
selected countries and can take some time to
load.
Downloaded From TV-Manual.com Manuals
Change programme guide options
You can set or clear reminders, change the
day, and access other useful options in the
programme guide options menu.
Engl i s h
Use the Electronic
Programme Guide
1
2
Press
3
Press
OPTIONS.
» The programme guide menu appears.
4
Select one of the following options, then
press OK.
† [Set reminder] / [Clear reminders]:
Set or clear programme reminders.
† [Change day]: Set the programme
guide day.
† [More info]: Display programme
information.
† [Search by genre]: Search TV
programmes by genre.
† [Scheduled reminders]: List
programme reminders. Only
available for upcoming programmes.
† [Acquire EPG data]: Update the
latest programme guide information.
.
Select [Programme guide], then press
OK.
EN
21
Display the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Change the clock mode
1
2
3
Set the TV clock manually
In some countries, you need to set TV clock
manually.
1
2
Press
.
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Auto clock].
Select [Automatic] or [Manual], then
press OK.
Change the time zone
.
Note
Select [Setup] > [TV settings] >
[Preferences] > [Clock].
3
4
5
6
Select [Auto clock], then press OK.
7
8
Select [Done], then press OK.
Select [Manual], then press OK.
Select [Time] or [Date], then press OK.
Press the Navigation buttons to set the
time or date.
Press
Press
to exit.
Note
† This option is only available if you select [Auto
clock] > [Automatic] (in countries with clock
transmission data).
1
2
3
4
.
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Time zone].
Select your time zone.
Press OKYJXJ]\<?}
Use daylight saving
† If your selected country supports digital
broadcast, the clock displays the time data
from your TV service operator as priority.
Press
Note
† This option is only available if you select [Auto
clock mode] > [Manual].
Display the TV clock
1
While you watch TV, press
OPTIONS.
» The options menu is displayed.
2
3
Select [Clock].
Press OK.
Note
† To disable the clock, repeat the procedure.
22
EN
Downloaded From TV-Manual.com Manuals
1
2
3
Press
.
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Daylight
saving], then press OK.
Select [Standard time] or [Daylight
saving time], then press OK.
Lock unsuitable content
You can set timers to switch the TV to standby
>Y>Z[*X;\*QY;?*}
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Tip
† Set the TV clock before you use timers.
Automatically switch the TV to
standby (sleep timer)
Set or change code
1
2
Press
3
Select [Set code] or [Change code].
» The [Set code] / [Change code] menu
appears.
4
Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Sleep timer switches the TV to standby after a
[<*ŒQ*\]*QQW<>Y;J]}
Tip
† You can switch off your TV earlier or reset the
sleep timer during the countdown.
1
2
Press
.
Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
» The [Sleep timer] menu appears.
3
Select a value between zero and 180
minutes.
» If you select zero, the sleep timer
switches off.
4
Press OK to switch on the sleep timer.
» The TV switches to standby after the
Z[*X;\*QY;?*}
Downloaded From TV-Manual.com Manuals
.
Select [Setup] > [Channel settings] >
[Child lock].
Tip
† If you forget your code, enter ‘8888’ to
override any existing codes.
EN
23
Engl i s h
Use timers
Lock or unlock one or more channels
1
Press > [Setup] > [Channel settings] >
[Child lock] > [Channel lock].
» A list of channels is displayed.
2
Select the channel that you want to lock
or unlock, then press OK.
» ,*\<ZYY;?*‘JW~JX”J<W]~JX”>
channel, you are prompted to enter
your PIN code.
3
Enter your code and press OK.
» If the channel is locked, a lock icon is
displayed.
4
Repeat the process to lock or unlock
more channels.
5
To activate the locks, switch the TV on
and off.
» When you switch channels with CH
- or CH +, the locked channels are
skipped.
» When you access the locked channels
from the channel grid, you are
prompted to enter your PIN code.
View Scenea
You can display a default picture as the
wallpaper on your TV. You can also load another
picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed
for 240 minutes. Otherwise, it is displayed for
the duration of the sleeptimer.
Switch on Scenea
1
2
Press
.
Select [Scenea], then press OK.
» If no picture has been set, the default
picture is displayed.
» If a customised Scenea picture is
loaded, that picture is displayed (see
‘Customise the Scenea picture’ on
page 24).
Customise the Scenea picture
You can load another picture as the wallpaper.
Note
Set parental ratings
† When you load a new Scenea picture, it
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings lower than your child’s age.
† To use another picture as the wallpaper, you
1
2
Press
.
Select [Setup] > [Channel settings] >
[Child lock] > [Parental rating].
» A code setup screen appears.
3
Enter your code using Numeric buttons.
» The rating menu appears.
4
5
Select an age rating, then press OK.
24
Press
EN
to exit.
Downloaded From TV-Manual.com Manuals
overrides the current Scenea picture.
need a USB storage device that contains a
picture that is less than 1 MB in size.
1
Load a picture smaller than 1MB in size
into a USB storage device.
2
Connect the USB storage device to the
TV.
3
4
5
Press
6
Select [Set as Scenea], then press OK.
» žXJ]\<?>Y;J]?*ZZ>*;ZQ;Z[~>‘*Q}
7
Press OKYJXJ]\<?…Y,*][<*ZZ>]‘
button to exit Scenea.
.
Select [Browse USB], then press OK.
Select a picture, then press
OPTIONS.
Depending on your broadcaster, you can change
the audio language, subtitle language, or both,
for a TV channel.
Multiple audio languages, subtitles, or both, are
broadcast through teletext or DVB-T digital
broadcasts. Dual sound broadcasts: With digital
broadcasts, you can select a subtitle language.
Show or hide subtitles
1
2
While you watch TV, press SUBTITLE.
Engl i s h
Change language
Select one of the following, then press
OK.
† [Subtitles on]: Always display
subtitles.
† [Subtitles off]: Never display
subtitles.
† [On during mute]: When audio is
muted, display subtitles.
Change menu language
1
2
3
Press
Note
.
Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
† Repeat this procedure to enable subtitles on
each analogue channel.
† Select [Subtitles] > [Subtitles off] to disable
subtitles.
Select a language, then press OK.
Change audio language
You can choose an audio language if it is
available from your broadcaster. For digital
channels, multiple languages may be available.
For analogue channels, two languages may be
available.
1
While you watch TV, press
OPTIONS.
2
For digital channels, select [Audio
language], select the language, then press
OK.
3
For analogue channels, select [Dual I-II],
select either language, then press OK.
Downloaded From TV-Manual.com Manuals
Select a subtitle language in digital
channels
Note
† When you select a subtitle language in a digital
TV channel as described below, the preferred
subtitle language set in the installation menu is
temporarily overruled.
1
While you watch TV, press
OPTIONS.
2
Select [Subtitle language], then press
OK.
3
4
Select a subtitle language.
Press OKYJXJ]\<?}
EN
25
Play photos, music and videos
on USB storage devices
Change slide show settings
1
While you view a slide show, press
OPTIONS.
» The slide show options menu is
displayed.
2
Select one of the following, then press
OK.
† [Start/Stop slideshow]: Start or stop
slideshow.
† [Slideshow transitions]: Set the
transition from one picture to the
next.
† [Slideshow frequency]: Select the
display time for each photo.
† [Rotate image]: Rotate photo.
† [Show info]: Display the picture
name, date, size and next picture in
the slide show.
3
To return, press
Caution
† Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
Connect a USB storage device to play photos,
music or videos stored on it.
1
2
Switch on the TV.
3
4
Press
Connect the USB device to the USB port
on the side of your TV.
.
Select [Browse USB], then press OK.
» The USB browser appears.
View photos
1
In the USB browser, select [Picture], then
press OK.
2
Select a photo or a photo album, then
press OK to view the photo enlarged to
\~~Y,*ŽZX<**]}
† To view the next or previous photo,
press
.
3
To return, press
.
View a slide show of your photos
1
When a full screen image of a photo is
displayed, press OK.
» A slide show begins from the selected
photo.
†
†
Press the following buttons to control
play:
†
to play.
†
to pause.
†
or to play the previous or next
photo.
†
to stop.
To return, press .
26
EN
Downloaded From TV-Manual.com Manuals
.
Note
† [Rotate image] and [Show info] appear only
when the slideshow is paused.
Listen to music
1
In the USB browser, select [Music], then
press OK.
2
Select a music track or album, then press
OK to play.
3
To control play, press the play buttons:
†
to play.
†
to pause.
†
or to play the previous or next
track.
†
or
to search forward or
backward.
†
to stop.
View a slideshow with music
†
You can view a picture slide show with
background music.
While you play music, press
OPTIONS to access one of the
following settings, then press OK.
† [Stop playback]: Stop music play.
† [Repeat]: Play a song once or
repeatedly.
† ˜E„œ&š / ˜E„œ&„„š: Play songs
in sequence or at random.
† [Show info]•‰;Z[~>‘Y,*\~*]>?*}
† [Sound]: Change sound settings.
Watch video
1
In the USB browser, select [Video], then
press OK.
2
3
Press OK to play.
To control play, press the play buttons:
1
2
3
Engl i s h
Change music settings
Select an album of songs.
Press OK.
Press
to return to the USB content
browser.
4
5
Select an album of pictures.
6
To exit, press
Press OK.
» The slideshow begins.
.
Disconnect a USB storage device
Caution
† Follow this procedure to avoid damage to your
USB storage device.
Change video settings
†
While you play video, press
OPTIONS to access one of the
following settings, then press OK.
† [Stop playback]: Stop video play.
† [Repeat]: Play once or repeatedly.
† [Subtitles]: If available, select
whether the subtitles are displayed.
† ˜E„œ&š / ˜E„œ&„„š: Play in
sequence or at random.
† [Show info]•‰;Z[~>‘Y,*\~*]>?*}
† [TV speakers]: Play audio from
TV speakers or from a connected
EasyLink device (see ‘Set TV
speakers to EasyLink mode’ on page
40).
Downloaded From TV-Manual.com Manuals
1
2
Press
to exit the USB browser.
¡>;Y|J<\€*Z*XJ]QZ…Y,*]Q;ZXJ]]*XY
the USB storage device.
EN
27
Listen to digital radio
channels
1
Press FIND.
» The channel matrix menu is displayed.
2
Press
OPTIONS, then select [Select
list] > [Radio].
» The radio channel grid appears.
3
Download the latest software version
1
2
3
Connect a USB storage device.
4
¢J~~J„Y,*;]ZY<WXY;J]ZYJ~J>Q>\~*J]YJ
your USB storage device.
5
Connect the USB storage device to your
XJ?[WY*<…Y,*]QJW‚~*ŒX~;X”Y,*\~*}
» A Web page is launched.
6
Follow the instructions in the Web page.
† If the current software version
matches the latest software update
\~*…‘JWQJ]JY]**QYJW[Q>Y*‘JW<
TV software.
† If the current software version is
smaller than the latest software
W[Q>Y*\~*…QJ„]~J>QY,*~>Y*ZY
ZJ|Y„><*W[Q>Y*\~*YJY,*<JJY
directory of your USB device.
7
Disconnect the USB storage device from
the computer.
8
Connect your USB storage device to the
TV.
9
Select [Setup] > [Software update] >
[Local updates].
Select a radio channel and press OK to
listen.
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Update software
You can update the TV software in one of the
following ways:
A with a USB storage device,
B automatically through digital broadcasts,
or
C manually through digital broadcasts.
Update with a USB device
To update with a USB storage device, you
need:
† A computer with Internet access
† A USB storage device.
1
2
Press
.
Press
.
Select [Setup] > [Software update
assistant].
10 Press OK to update the TV software.
11 Follow the on-screen instructions to
complete the update.
12 To exit, press
.
Note
† The TV restarts after the software update is
Select [Setup] > [Software update] >
[Current software inf].
» The current software information is
displayed.
3
Write down the software version
number.
4
To exit, press
28
EN
.
Downloaded From TV-Manual.com Manuals
complete.
1
Connect your USB storage device to the
TV.
2
3
Press
.
Update at any time through digital
broadcast
Engl i s h
Update the TV software
You can update your TV manually through
digital broadcasts.
Select [Setup] > [Software update] >
[Local updates] > [USB].
Press
4
1
2
Press OK to update the TV software
manually.
5
3
Follow the on-screen instructions to
complete the update.
Follow the on-screen instructions to start
the update.
» The TV restarts after the software
update is complete.
.
Select [Setup] > [Software update] >
[Check on major updates].
Note
† The TV restarts after the software update is
complete.
Update when prompted through
digital broadcast
If you receive digital broadcasts (DVB-T),
your TV can automatically receive software
updates.
1
2
Press
.
Select [Setup] > [Software update] >
[Announcement].
3
If a message appears to prompt you
to update your software, follow the
instructions to start the update.
» The TV restarts after the software
update is complete.
4
If you do not want to update the
software, select [Setup] > [Software
update] > [Clear announcement], then
press OK.
Note
† If you skip the update, you can update it
manually later (see ‘Update at any time
through digital broadcast’ on page 29).
Downloaded From TV-Manual.com Manuals
EN
29
Change TV preferences
Start a TV demo
Use the preferences menu to customise your
TV settings.
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
2
3
30
Press
.
Select [Setup] > [TV settings] >
[Preferences].
Select one of the following, then press
OK.
† [Menu language]: Select a menu
language.
† [Sleep timer]: Switch the TV to
ZY>]Q‚‘>|Y*<>[<*ŒQ*\]*QQW<>Y;J]}
† [Location]: Optimise TV settings for
your location - home or shop.
† [E-sticker]: (For shop mode only)
Switch the e-sticker on or off.
† [Volume bar]: Display the volume
bar when you adjust the volume.
† [Auto switch off]: To conserve
energy, set the TV to switch off
automatically after a period of
inactivity.
† [Channel information size]: Change
the type of information that is
displayed when you switch channels.
† [Universal access]: Enable or disable
the universal access menu.
† [Key beep]: Enable audio feedback
when you press buttons on the
remote control or TV.
† [Audio out delay]: Automatically
sync the image on your TV to the
audio from a connected Home
Theatre.
† [TV position]: Apply the best
settings for your TV based on how it
is mounted.
† [Teletext 2.5]: Enable or disable
Teletext 2.5. (For digital TV)
† [Clock]: Display or remove the time
from the TV, and set clock options.
EN
Downloaded From TV-Manual.com Manuals
1
2
3
4
While you watch TV, press
.
Select [Setup] > [Watch demo], OK.
Select a demo and press OK to view it.
To exit, press
.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
2
Press
.
Select [Setup] > [TV settings] >
[Factory settings], then press OK.
3
If you are prompted to enter a code,
enter the child-lock code (see ‘Set or
change code’ on page 23).
» žXJ]\<?>Y;J]?*ZZ>*;ZQ;Z[~>‘*Q}
4
Press OKYJXJ]\<?}
,*\<ZYY;?*‘JWZ*YW[‘JW<Ž…‘JW><*
prompted to select a menu language and to
install TV and digital radio channels (if available).
ž|Y*<„><QZ…‘JWX>]<*Œ;]ZY>~~>]Q\]*YW]*
channels.
Update the channel list
You can enable automatic update of channels
when your TV is in standby mode. The
channels stored in your TV are updated every
morning according to the channel information
in the broadcast.
1
2
Press
Automatically install channels
3
Select [On] to enable the automatic
update or select [Off] to disable it.
You can search and store channels automatically.
4
To return, press
.
Select [Setup] > [Channel settings] >
[Channel installation] > [Automatic
channel update].
.
Step 1 Select your menu language
1
2
3
Press
.
Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
Select a language, then press OK.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1
2
Press
.
Select [Setup] > [Search for channels],
then press OK.
3
Select [Reinstall channels], then press
OK.
» The country menu appears.
4
Select your country, then press OK.
» The channel installation guide begins.
5
Select [Start], then press OK.
» All available channels are stored.
6
To exit, press OK.
Downloaded From TV-Manual.com Manuals
EN
31
Engl i s h
6 Install channels
Manually install channels
Step 3 Fine-tune analogue channels
This section describes how to search and store
analogue TV channels manually.
1
2
Press
3
Press
Step 1 Select your system
.
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
manual install] > [Fine-tune], then press
OK.
YJ\]*ŒYW]*Y,*X,>]]*~}
Note
† Skip this step if your system settings are
correct.
1
2
3
Press
.
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > [System],
then press OK.
Select the correct system for your
country or region, then press OK.
Step 2 Search and store new TV
channels
1
2
Press
.
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > *[Find
channel], then press OK.
† If you know the three-digit frequency
of the channel, enter it.
† To search, select [Search], then press
OK.
3
When the channel is found, select
[Done], then press OK.
† To store the channel as a new
number, select [Store as new
channel], then press OK.
† To store the channel as the
previously selected channel, select
[Store current channel], then press
OK.
32
EN
Downloaded From TV-Manual.com Manuals
Rename channels
You can rename channels. The name appears
when you select the channel.
1
While you watch TV, press FIND.
» The channel matrix menu is displayed.
2
3
Select the channel to rename.
Press
OPTIONS.
» The channel options menu appears.
4
Select [Rename channel], then press OK.
» A text input box appears.
5
Press
to select each character,
then press OK.
6
When the name is complete, select
[Done], then press OK.
Tip
† Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Access CAM services
After you install channels, you can rearrange the
order in which they appear.
1
Insert and activate the CAM (see ‘Insert
and activate a CAM’ on page 38).
1
While you watch TV, press FIND.
» The channel matrix menu is displayed.
2
3
Press
2
Press
OPTIONS.
» The channel options menu appears.
3
4
Select [Reorder], then press OK.
Select the channel to rearrange, then
press OK.
» The selected channel is highlighted.
5
Move the highlighted channel to its new
location, then press OK.
6
7
Press
OPTIONS.
Select [Common interface].
» Applications provided by the digital TV
service operator are displayed.
Note
† This menu option is available only if the CAM
is inserted and activated correctly.
OPTIONS.
Select [Done reordering], then press
OK.
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1
2
Press
.
Select [Setup] > [Channel settings]
> [Channel installation] > [Digital:
Reception test] , then press OK.
3
Enter the frequency to test, then press
OK.
4
5
Select [Search], then press OK.
When the channel is found, select
[Store], then press OK.
Note
† If the signal quality and strength is poor,
reposition the aerial or satellite dish and retest.
† If you still have problems with the reception
of your digital broadcast, contact a specialised
installer.
Downloaded From TV-Manual.com Manuals
EN
33
Engl i s h
Rearrange channels
7 Connect devices
b EXT 1 (RGB and CVBS)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
This section describes how to connect devices
with different connectors. For the location of
these connectors on your TV, see the Quick
Start Guide. More examples of connections
with other devices are provided in the Quick
Start Guide.
Note
† You can use different types of connectors to
connect a device to your TV.
Tip
† After connection, for easy access to your
device, add it to the home menu: press
select [Add new device].
, then
c DIGITAL AUDIO OUT
Digital audio output to home theatres
and other digital audio systems.
Back connections
SPDIF OUT
a TV ANTENNA (For selected models)
Signal input from an antenna, cable or
satellite.
TV ANTENNA
d SERV. U (For selected models)
For use by service personnel only.
34
EN
Downloaded From TV-Manual.com Manuals
g HDMI 2 (For selected models)
Digital audio and video input from highQ*\];Y;J]Q;;Y>~Q*€;X*ZZWX,>Z§~WŒ<>‘
players.
VGA
VGA
AUDIO IN
LEFT/RIGHT
VGA/DVI
f HDMI 1 ARC (For selected models)
Digital audio and video input from highQ*\];Y;J]Q;;Y>~Q*€;X*ZZWX,>Z§~WŒ<>‘
players. Also outputs TV audio to other
EasyLink-compliant devices, such as home
theatre systems.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 37).
h EXT 2 (Y Pb Pr and AUDIO L/R) (For
selected models)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 37).
Downloaded From TV-Manual.com Manuals
EN
35
Engl i s h
e PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
Side connections
a AUDIO L/R (For selected models)
Audio input from analogue devices
connected to VIDEO.
d HDMI
Digital audio and video input from highQ*\];Y;J]Q;;Y>~Q*€;X*ZZWX,>Z§~WŒ<>‘
players.
e
b VIDEO (For selected models)
Composite video input from analogue
devices such as VCRs.
c USB
Data input from USB storage devices.
36
EN
Downloaded From TV-Manual.com Manuals
(Headphone)
Stereo audio output to headphones or
earphones.
f COMMON INTERFACE
Slot for a Conditional Access Module
(CAM).
Before you connect a computer to the TV
† Set the screen refresh rate on your
computer to 60Hz.
† Select a supported screen resolution on
your computer.
Connect a computer with one of the
following connectors:
HDMI cable and HDMI-DVI adaptor
Engl i s h
†
Connect a computer
AUDIO IN
LEFT/RIGHT
VGA/DVI
DVI
Note
† Connections via DVI or VGA require an
additional audio cable.
†
HDMI cable
†
VGA cable
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA
DVI-HDMI cable
VGA
†
AUDIO IN
LEFT/RIGHT
VGA/DVI
DVI
Downloaded From TV-Manual.com Manuals
EN
37
Use a Conditional Access
Module
Access CAM services
1
Insert and activate the CAM (see ‘Insert
and activate a CAM’ on page 38).
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
2
3
Press
Note
† Refer to the documentation from your service
operator on how to insert a smart card into
the Conditional Access Module.
OPTIONS.
Select [Common interface].
» Applications provided by the digital TV
service operator are displayed.
Note
† This menu option is available only if the CAM
is inserted and activated correctly.
Insert and activate a CAM
Caution
† Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1
Switch off the TV and disconnect it from
the power outlet.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3
4
5
Push the CAM in as far as it will go.
38
EN
Reconnect the TV to the power outlet.
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM
from the slot when in use — this action
deactivates digital services.
Downloaded From TV-Manual.com Manuals
Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control
features. If your HDMI-CEC compliant devices
are connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
† Connect at least two HDMI-CEC
compliant devices through HDMI
† ˜J]\W<**>X,ˆ‰Š‹Œ˜ª˜XJ?[~;>]Y
device properly
† Switch on EasyLink
Use one-touch play
1
After you switch on EasyLink, press play
on your device.
» The TV automatically switches to the
correct source.
Use one-touch play control
If you connect multiple HDMI-CEC devices
that support this setting, all such devices
respond to the play control buttons on this
TV remote control.
Caution
† This is an advanced setting. Devices that do
not support this setting will not respond to the
TV remote control.
Note
† The EasyLink-compliant device must be
switched on and selected as the source.
† Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
1
2
3
Press
.
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink remote control].
Select [On] or [Off], then press OK.
Switch on or off EasyLink
When you play an HDMI-CEC compliant
device, the TV switches on from standby, and
switches to the correct source.
Note
† If you do not intend to use Philips EasyLink,
switch it off.
1
2
3
Press
.
Use one-touch standby
When you press on the TV remote control,
the TV and all HDMI-CEC compliant devices
switch to standby mode.
1
Press (Standby-On) on the TV’s or
device’s remote control.
» The TV and all connected HDMI
devices switch to standby.
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
Select [On] or [Off], then press OK.
Downloaded From TV-Manual.com Manuals
EN
39
Engl i s h
Use Philips EasyLink
Set TV speakers to EasyLink mode
If you connect an HDMI-CEC compliant
device that includes speakers, you can choose
to hear the TV from those speakers instead of
the TV speakers.
When you play content from an EasyLink
compliant home theatre, if you want to
mute the TV speakers automatically, turn on
EasyLink mode.
If the connected device is HDMI Audio Return
Channel (ARC) compliant, and you connect
the device through an HDMI ARC connector,
you can output TV audio through the HDMI
cable. You do not need an additional audio
cable.
1
Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’
on page 34).
2
Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3
Select one of the following, then press
OK.
† [Off]: Switch off TV speakers.
† [On]: Switch on TV speakers.
† [EasyLink]: Stream TV audio
through the connected HDMI-CEC
device. Switch the TV audio to the
connected HDMI-CEC audio device
through the adjust menu.
† [EasyLink autostart]: Turn off TV
speakers automatically and streams
TV audio to the connected HDMICEC audio device.
Note
† To mute the TV speakers, select [TV
speakers] > [Off].
40
EN
Downloaded From TV-Manual.com Manuals
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch the
TV audio.
1
2
3
While you watch TV, press
ADJUST.
Select [Speaker], then press OK.
Select one of the following, then press
OK:
† [TV]: On by default. Stream TV
audio through TV and the connected
HDMI-CEC audio device until the
connected device switches to system
audio control. TV audio is then
streamed through the connected
device.
† ˜™…š: Stream audio through
the connected HDMI-CEC device.
If system audio mode is not enabled
on the device, audio continue to
stream from the TV speakers. If
[EasyLink autostart] was enabled,
the TV prompts the connected
device to switch to system audio
mode.
Maximise display for subtitled video
Some subtitles can create a separate subtitle
bar under the video, which limits the video
display area. After you switch on auto subtitle
shift, the subtitles display over the video
image, which maximises the video display area.
1
2
Press
.
Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift] > [On],
then press OK.
Switch other devices to standby
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
If you connect an EasyLink- compliant device
that has speakers, you can get the most out
of those speakers if you listen to TV audio
through them.
If the connected device is HDMI-ARC
compliant, and you connect the device
through an HDMI ARC connector, you can
output TV audio through the HDMI cable.
You do not need an additional audio cable.
1
2
Press
.
Select [Setup] > [TV settings] >
[EasyLink] > [Pixel Plus Link] > [On],
then press OK.
Hear TV audio through another
device
If you connect an EasyLink- compliant device
that has speakers, you can get the most out
of those speakers if you listen to TV audio
through them.
If the connected device is HDMI-ARC
compliant, and you connect the device
through an HDMI ARC connector, you can
output TV audio through the HDMI cable.
You will not need an additional audio cable.
1
Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’
on page 34).
2
3
Press
1
2
Engl i s h
Retain picture quality
Press the green button.
Select [Switch off unused sources], then
press OK.
» All connected EasyLink devices are
switched to standby.
.
Select [Setup] > [TV settings] >
[EasyLink] > [HDMI1 - audio out], then
press OK.
4
Select one of the following, then press
OK.
† [On]: Hear the TV audio through
the connected EasyLink device. You
cannot hear the TV audio through
the TV speakers or through devices
connected through the digital audio
out connector.
† [Off]: Hear the TV audio through
the TV speakers, or through a device
connected through the digital audio
out connector.
5
Control playback with the TV remote
control play buttons.
Downloaded From TV-Manual.com Manuals
EN
41
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
42
EN
Downloaded From TV-Manual.com Manuals
%" >H
2
D2
.
" ,DDD.2. *.
Supported display resolutions
Computer formats
C
8
"
2
/+A5+:A8/A-E
:AA5/AA8/A-E
BA+50/:8/A-E
B:A50A8/A-E
B:A50/:8/A-E
B:A5BA+8/A-E
B/A50/:8/A-E
B/:A5BA1A8/A-E-7
BIA5BA:A8/A-E-7
Video formats
C
8
"
2
+:A8/A-E
+:A8/A-E
10/81A-E
10/81A-E
0A81A-E,/A-E
BA:A81A-E,/A-E
BA:A8+-E,1-E,A-E,1A-E,
/A-E.
Multimedia
Tuner/Reception/
Transmission
012 5#&601
7)7)
,7)8(%&'+,
7)86
)
7)67(9*:9;%<#,
*',7*9;&6(*',7*9,<*<=
)
>?@6,&6(,%<
-
>,82
,-,
)-
Remote control
%AB&BB
5<CA
Power
Downloaded From TV-Manual.com Manuals
!
" # $%&'
(%
)
(%&'*(%&'+,-./+
(D
A8+A),1A-E8/A-E
>D
55%<55155/FA.B1G
55%<55+55/55%<5555/
FA.G
>
1+A
6
D
,
2
!DDD.2. *
.
EN
43
Engl i s h
8 Product
information
Supported TV mounts
2
),2
%2) >
) .
7
!
>H
2
D2
.
Warning
D
D22
)
.9?H?
%2&
@.).
>
>" )
2
,H
.
"
,
" 2
1
>
,
"
.2
1.1 " 2
>?"2
).
2
,
2
D
" 2
>?"2
).
3
(?
2 >
"D2
!
TV screen
size
(inches)
+0
+
+A
0
44
EN
Required
pitch
(mm)
+AA5AA
AA5AA
+AA5+AA
AA5AA
AA5AA
Required mounting
bolts
+5(:BA
+5(/BA
+5(/BB*B
+5(/BA
+5(/BA
Downloaded From TV-Manual.com Manuals
47PFL4606H
G2)
7 G5-57BBI.:5/I0.:
5: G
2B0.1?
G2)
7 G5-57BBI.:50+1./
5/: G
2A.I?
42PFL4606H
G2)
7 G5-57BAB:.15
/1.B5: G
2BB.0?
G2)
7 G5-57BAB:.15/:
5/.+ G
2B+.?
42PFL3606H/42PFL3506H
G2)
7 G5-57BAB:.15
/1.:5: G
2BB.0?
G2)
7 G5-57BAB:.15/:
5/.+ G
2B+.?
40PFL5606H
G2)
7 G5-57I+/5100.15
+A G
2B.?
G2)
7 G5-57I+/5/B5
I1 G
2B1?
Downloaded From TV-Manual.com Manuals
Engl i s h
37PFL4606H
G2)
7 G5-57IB.5100.B
5:+.B G
2BA.?
G2)
7 G5-57IB.5/1.
5/.+ G
2B.:?
32PFL5x06H
G2)
7 G5-570/B5+05
I.I G
20.?
G2)
7 G5-570/B511.15
B G
2:.I?
32PFL4606H
G2)
7 G5-570I1./51BA./
5I.B G
2:.?
G2)
7 G5-570I1./5110./
5B.+ G
2I.:?
32PFL3606H/32PFL3506H
G2)
7 G5-570I1./51A:.+
5I.B G
2:.?
G2)
7 G5-570I1./5110./
5B.+ G
2I.:?
32PFL3406H
G2)
7 G5-570:0.151A1.B
5:A.1 G
20.:?
G2)
7 G5-570:0.151+0.B
5B.+ G
2I.+?
EN
+1
9 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
Cannot remove ‘e-sticker’ banner displayed on
the TV.
Ÿ
To remove the logos and images, set the
location of your TV to home.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Location].
3. Select [Home] and press OK.
General TV issues
The TV does not switch on:
Ÿ
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Ÿ
Check that the power cable is securely
connected.
The remote control is not working properly:
Ÿ
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
Ÿ
Replace the remote control batteries if
Y,*‘><*’>YJ<„*>”}
Ÿ
Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
Ÿ
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the TV lock
feature
Ÿ
Enter ‘8888’.
The TV menu is in the wrong language.
Ÿ
Change the TV menu to your preferred
language.
When turning the TV on/off/to standby, you
hear a creaking sound from the TV chassis:
Ÿ
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
46
EN
Downloaded From TV-Manual.com Manuals
TV channel issues
Previously installed channels do not appear in
the channel list:
Ÿ
Check that the correct channel list is
selected.
No digital channels were found during the
installation:
Ÿ
Check that the TV supports DVB-T, DVBT Lite or DVB-C in your country.
Some channels are not automatically installed
on my TV:
Ÿ
During installation, make sure that
you select the country where you are
installing the TV.
Sound issues
The TV is on, but there is no picture:
Ÿ
Check that the antenna is properly
connected to the TV.
Ÿ
Check that the correct device is selected
as the TV source.
There is sound but no picture:
Ÿ
Check that the picture settings are
correctly set.
There is poor TV reception from an antenna
connection:
Ÿ
Check that the antenna is properly
connected to the TV.
Ÿ
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
J‚ƒ*XYZX>];]’W*]X*<*X*[Y;J]®W>~;Y‘}
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
Ÿ
If reception on only one channel is poor,
\]*YW]*Y,;ZX,>]]*~}
There is poor picture quality from connected
devices:
Ÿ
Check that the devices are connected
properly.
Ÿ
Check that the picture settings are
correctly set.
The TV did not save your picture settings:
† Check that the TV location is set to the
home setting. This mode offers you the
’*¯;‚;~;Y‘YJX,>]*>]QZ>€*Z*YY;]Z}
H&&… &&
big or too small:
Ÿ
Try using a different picture format.
The picture position is incorrect:
Ÿ
Picture signals from some devices may
]JY\YY,*ZX<**]XJ<<*XY~‘}˜,*X”Y,*
signal output of the device.
There is a picture but sound quality is poor:
Downloaded From TV-Manual.com Manuals
Engl i s h
Picture issues
Note
† If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
Ÿ
Check that all cables are properly
connected.
Ÿ
Check that the volume is not set to 0.
Ÿ
Check that the sound is not muted.
There is a picture but the sound quality is
poor:
Ÿ
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
Ÿ
Verify that sound balance is set to the
centre.
HDMI connection issues
There are problems with HDMI devices:
Ÿ
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
Ÿ
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
Ÿ
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
Ÿ
If you use an HDMI-to-DVI adapter
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO IN (mini-jack only).
EN
47
Computer connection issues
The computer display on the TV is not stable:
Ÿ
Check that your PC uses the supported
resolution and refresh rate.
Ÿ
Set the TV picture format to unscaled.
Contact us
If you cannot resolve your problem, refer to
the FAQs for this product at www.philips.
com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in the Addendum.
Warning
† Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
† Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
48
EN
Downloaded From TV-Manual.com Manuals
A
age rating
analogue channels
\]*ŒYW]*
language, change
audio language
23, 24
&#
25
25
C
CAM
enable
Insert
care
care
channels
channel list
favourites
hide or unhide
install (automatic)
install (manual)
rearrange
rename
reorder
switch
update
‡…¡¢&5£
child lock
clock
common interface
computer, see PC
Conditional Access Module
connect
connect device
connect, PC
connect, USB
connectors
controls
demo
devices
add
watch
digital channels
digital radio
language, change
subtitles
dimensions
display, wallpaper
30
14
12
28
25
25
44
24
E
38
38
5
5
12
20
20
31
32
33
32
33
11
31
32
23, 24
22
38
37
38
34
37
26
34, 36
7
Downloaded From TV-Manual.com Manuals
EasyLink
control devices, from TV remote
enable
hear from other speakers
automatically
manually
picture quality, retain
subtitled video, maximise view
switch to standby, all devices
Electronic Programme Guide
environmental care
end of use
recycle
while you watch TV
EPG, menu
39
39
40
41
41
40
41
21
6
6
6
21
F
factory settings
favourites list, add
30
20
H
HDMI
HDMI ARC
hearing impaired
5¡…&¢(£‡&
home menu
home mode
34, 36
34
18
34, 36
14
30
EN
49
Engl i s h
D
10 Index
I
S
install
install channels
install channels (automatic)
install channels (manual)
Scenea, see screen saver
Scenea, switch on
screen saver
settings
assistant
picture
sound
shop mode
sleeptimer
smart picture
smart sound
software
digital broadcast update
USB update
sound settings
…&
standby
subtitle, language
subtitles
switch
switch TV on or off
31
32
K
kensington lock
42
L
language
audio
menu
subtitles
location, home or shop
25
25
25
30
M
multimedia
‡8…
mute TV speakers
26
26
40, 41
P
24
24
24
15
16, 15
17, 18
30
23
15
17
29
28
17, 18
43
11
25
25
10
10, 11
T
PC, display resolutions
picture format
picture settings
Pixel Plus link
position the TV
power
43
16
15, 16
41
30
43
R
recycle
reinstall TV
remote control
onscreen
overview
rename channels
reorder channels
teletext
dual screen
enlarge
subpages
Table Of Pages
teletext 2.5
troubleshoot
6
31
U
39
8
32
33
V
universal access
visually impaired
volume
19
19
19
19
19
46
18
18
13
W
wall mount
50
EN
Downloaded From TV-Manual.com Manuals
44
Info for UK only.
Information about how to
re-tune your TV during the
digital TV switchover.
Television in the UK is going digital, bringing us
all more choice and new services. Starting in
late 2007 and ending in 2012, television
services in the UK will go completely digital, TV
region by TV region.
Please see the next page to find out when your
area switches to digital.
Digital UK is the independent, non-profit
organisation leading the process of digital TV
switchover in the UK. Digital UK provides impartial information on what people need to do
to prepare for the move to digital, and when
they need to do it.
How the switchover affects
your TV equipment:
Your new TV has a digital tuner built in, which
means it is ready to receive the Freeview signal
by simply plugging it into your aerial socket
(check if you can get digital TV through your
aerial now, or whether you’ll have to wait until
switchover, at www.digitaluk.co.uk).
When the TV switchover happens in your area,
there are at least two occasions when you will
need to re-tune your TV in order to continue
receiving your existing TV channels, and also to
pick up new ones.
EN
Downloaded From TV-Manual.com Manuals
51
How to re-tune:
Digital UK, the body leading the digital TV
switchover, will advise you when you need to
re-tune during the switchover.
If you do not re-tune your channels when
advised to do so by Digital UK, you may lose
some or all of your channels until you do
re-tune. You should re-tune your TV every
few months to check for any new channels.
If you choose to connect your TV to satellite or
cable with a digital box then it will not be
affected by switchover, and you won’t need to
re-tune.
When the installation is complete, press OK.
Your TV is now retuned.
If you have any questions, please contact your
equipment supplier or call Digital UK on …
0845 6 50 50 50 or visit www.digitaluk.co.uk
If you are missing any channels, it may be
that they are not available in your area, or
that your aerial needs upgrading.
1. Press h on the remote control.
2. Select Setup and press OK.
3. Select Search for channels and press OK.
4. Select Reinstall channels and press OK.
5. Select your country (UK) and press OK.
6. Select Antenna DVB-T and press OK.
7. Select Start and press OK.
The installation can take several minutes.
When does switchover happen?
* Copeland switches on October 17, 2007
The exact date you switch
depends on the transmitter
you are served by. To check
when you switch, go to
Digital UK’s postcode
checker on
www.digitaluk.co.uk
Check your ITV news service
or look at Teletext page 106
to see what TV region you’re
in.
Visit us at digitaluk.co.uk
Call us on 0845 6 50 50 50†
* Calls charged at BT rate of 3p per minute daytime and
1p per minute evenings and weekends. Rates may vary
for calls from non-BT lines.
52
EN
Downloaded From TV-Manual.com Manuals
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
Downloaded From TV-Manual.com Manuals