MEDIPREVENTIECENTRUM Pulse Oximeter User manual

User Manual
Electronic Sphygmomanometer
■ To assure the correct use of the product safety measures, please carefully read user manual
before using.
■ After reading, please validly keeping to refer and consult at any moment.
Contents
Chapter1 Safety Precautions:....................................................................................................... 1
Chapter2 Main Unit......................................................................................................................3
Chapter3 Button Functions...........................................................................................................4
Chapter4 External Interfaces........................................................................................................ 4
Chapter5 Dry Battery/AC Adapter Installation............................................................................ 5
5.1 Dry Battery Installation..................................................................................................... 5
5.2 Using The AC Adapter...................................................................................................... 5
Chapter6 Setting The Date And Time...........................................................................................6
Chapter7 Unit............................................................................................................................... 7
Chapter8 User Switch...................................................................................................................7
Chapter9 Applying the Arm Cuff................................................................................................. 7
Chapter10 BP Measurement......................................................................................................... 8
10.1 Accurate Measurement Way............................................................................................ 8
10.2 BP Measurement..............................................................................................................9
Chapter11 Memory Function......................................................................................................10
11.1 Review The Memory Value........................................................................................... 10
11.2 Delete Memory Values...................................................................................................11
Chapter12 Alarm Function......................................................................................................... 11
Chapter13 SpO2 Measurement Function(Separate Sale)........................................................... 12
Chapter14 Monitoring Procedure............................................................................................... 13
Chapter15 Maintenance and Cleaning........................................................................................14
Chapter16 Installation Of The Software.....................................................................................15
16.1 Demand Of Editor......................................................................................................... 15
16.2 Installation Of Software................................................................................................ 15
Chapter17 Keys And Symbols....................................................................................................16
Chapter18 Error Message........................................................................................................... 16
Chapter19 TROUBLESHOOTING............................................................................................18
Chapter20 Clean And Maintenance............................................................................................19
Chapter21 NIBP Specification................................................................................................... 21
Chapter22 SpO2 Specification................................................................................................... 23
I
Chapter1 Safety Precautions:
� Before use, carefully read "Safety Precautions" for a correct use.
� To prevent users suffered hurt or damnification due to improper use, see "Safety
Precautions", and use this product properly.
For safety reasons, be sure to comply with safety precautions.
Note
If not to use correctly, it exists that a potentially hazardous situation which may result in injury to
the user or patient or damage to the equipment or other property.
Note
Self-diagnosis and treatment using measured results may be dangerous.
Follow the instructions of your physician.
Contact your physician for specific information about your blood pressure.
Please hand measurement results to the doctor who know your health to accept diagnosis.
For severe blood circulation disorder or arrhythmia patients, please use the device under the
guidance of a doctor.
Otherwise it may lead to acute hemorrhage, or measurement error as a result of squeezed arm.
This device is intended for using in measuring blood pressure and pulse rate.
Do not use for any other purpose.
Otherwise it may cause accident or holdback.
Please use special cuff.
Otherwise it is possible that measurement result is incorrect.
Do not disassemble or attempt to repair the unit or components without permission.
Otherwise it can not measure correctly.
Operation for AC Adapter (Separate Sale)
Note
Please use sold separately dedicated AC adapter.
Otherwise it may cause trouble.
Sold separately dedicated AC adapter be sure to use a separate socket.
Otherwise it may cause electric shock or injury.
When there is breakage of sold separately dedicated AC adapter plug or wire ,
please immediately pulled the plug from the socket.
Otherwise it may cause electric shock or injury.
Do not plug or unplug the adapter power cord with wet hands.
Otherwise it may cause electric shock or injury.
1
Operation for battery
Note
Please use 4 "AA" size manganese or alkaline batteries, do not use batteries of other types.
Otherwise it may cause fire.
New and old batteries, different kinds batteries can not be confusion.
Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic
Sphygmomanometer.
+ and - polarities of the batteries must match the polarities of the battery compartment as
indicated. When the batteries power exhausts, replace with four new batteries at the same time.
Please take out the batteries when you do not use the device for a long time.
Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic
Sphygmomanometer.
If battery fluid should get in your eyes, immediately rinse with plenty of clean water.
Contact a physician immediately.
Otherwise it will cause blindness or other hazards.
If electrolyte of the batteries immodestly glues on the skin or the clothes,
immediately rinse with plenty of clean water.
Otherwise it may hurt the skin.
Advice
Do not subject the device to strong shocks, such as dropping the unit on the floor.
Do not inflate before the cuff wrapps around the arm
Do not inflect the cuff and the air tube forcibly
This device is intended for using in measuring blood pressure and pulse rate in the adult,
pediatric and neonatal population.
Warning
Please use the device on the adult object who can read the user manual and the error
message shown on the screen. Read the user manual before use the device in order to take
actions according to the manual when something wrong with the device. For pediatric and
neonatal population
population,, measurement should be only performed by qualified personnel. And
please make sure to select the right user mode and cuff before use .
2
Chapter2 Main Unit
The production is in the package. Open the package and confirm whether the production is
whole.
Display
Cuff Plug
Cuff Air Plug
UP/DOWN Button
MEMORY Button
AC Adapter Jack
MENU Button
USB Plug Jack
USER SWITCH Button
ON/OFF Button
START/STOP Button
Accessories
Accessories:
Adult Cuff
Dry Battery
(Specification: limb circumference 22-32cm (middle part of upper arm), please choose suited
cuff when measuring pediatric or other).
USB Data Line
Software CD
User Manual
Separate Sale:
AC Adapter
InputAC
100-240V 50-60Hz
Output
DC 6.0V 1.0A
SpO2 Probe Y10UCH150
SpO2 Measurement Range
Measurement Accuracy
Pulse Measurement Range
3
AC 500mA
35%~100 %
70%~100% ±2%
30~250bpm
Chapter3 Button Functions
All the operations to the Electronic Sphygmomanometer are through the buttons. The names of
the buttons are above them. They are:
ON/OFF
【ON/OFF
ON/OFF】
Hold the button to start or close the device.
START/STOP
【START/STOP
START/STOP】
Press to inflate the cuff and start a blood pressure measurement.
When measuring, press to cancel the measurement and deflate the cuff.
The three buttons correspond with the hint in the LCD screen downside,
pressing any button will carry on corresponding function, eg:【MENU】
【ENTER】
【LIST】 etc.
Up and down buttons respectively carry on the functions of moving the cursor up and
down, changing the parameters and switching the status.
Chapter4 External Interfaces
Note
Please hold the air plug to remove the NIBP cuff.
① Cuff Socket
left side
The right side of the instrument is USB socket and AC adapter socket.
①USB socket
②AC adapter socket
right side
4
Chapter5 Dry Battery/AC Adapter Installation
The production can use dry battery or AC adapter as power source.
�
�
�
5.1 Dry Battery Installation
1
Press the▲indicator on the battery cover and slide the cover off in the direction of the
arrow.
2 Install 4 "AA" size dry batteries so the +(positive) and 一 (negative) polarities match the
polarities of the battery compartment as indicated.
3
Replace the battery cover.
Icon “
”: the batteries power will exhaust.
Replace with four new batteries (the same sort) at the same time.
Turn the unit off before replacing the batteries.
Note
Dispose of the batteries according to applicable local regulations about environmental.
5.2 Using The AC Adapter
1 Connect device and the AC Adapter. Insert the AC Adapter Plug into the AC Adapter Jack
on the right side of the device.
2
Plug the AC Adapter into a AC outlet.
Note
Hold and pull the Housing to remove the AC Adapter from the electrical outlet. Do not
①Hold
remove by pulling on the cord.
② Remove the AC Adapter plug from the unit.
Please be sure to use dedicated AC adapter.
Note
You'd better take off batteries when use the AC adapter as power source. If there is any
damage to the AC adapter, you should use batteries to run the device.
5
When adapter and batteries are both used at the same time, the battery power will not be
consumed. Switch adapter and battery as power supply when the device is off, otherwise,
the device may shutdown due to power failure.
Chapter6 Setting The Date And Time
�
�
�
It is necessary to set date and time after turning on the device.
The Electronic Sphygmomanometer automatically stores measurement results with date and
time.
If dry battery power exhausts or removed, then, after the device turned on, the date resumes
from the last setting value and the time from 00:00:00, set the date and time again.
The Electronic Sphygmomanometer stores the measure results of three users automatically, and
up to 100 items for every user. The results can be uploaded to PC via USB and processed with
the PC software. If the date and time are set correctly, the date and time when measuring will be
correct in the memory, otherwise it may not be correct.
Note
Correctly use data upload function:
1. Turn on the device to enter the main interface shown as the follow:
2.Press 【MENU】 button to enter 【SYSTEM MENU】 and select【SYSTEM TIME】 item
in system menu. The current time will be displayed:
3.Press 【UP】 or 【DOWN】 buttons to set date and time.
4.After setting, select 【CONFIRM】 item and press 【ENTER】 button to confirm the setting
value. If you do not want to change the time, select 【EXIT】 item and press 【ENTER】 button
to return the previous menu.
Note
Please choose the computer which should be ensured compliance with the requirements of
IEC60950, or else it may damage the device.
6
Chapter7 Unit
There are two units: "mmHg" and "kPa".
The default is: "mmHg".
To switch "mmHg" and "kPa" units, enter the 【SYSTEM SETUP】 submenu in 【SYSTEM
MENU】, and complete switching in 【UNIT】 item.
Chapter8 User Switch
The Electronic Sphygmomanometer stores the measure results of three users automatically, and
up to 100 items for every user.
Press 【USER】 button in main interface to switch users. Or press 【USER PURVIEW】 item
in 【SYSTEM SETUP】 menu to switch users.
Note
USER PURVIEW
ALL
When the 【USER
PURVIEW】 is set to be 【ALL
ALL】,, current user can be switched under
main interface; when set to a certain user, it will not be able to switch.
Chapter9 Applying the Arm Cuff
The measurement can be carried out by applying the cuff on left or right arm.
Remove tight-fitting clothing from your upper arms.
Carry out the operation in a room with comfortable temperature.
When measuring, take the thick clothes off instead of rolling up the sleeves.
In order to measure accurately, pay attention to applying the cuff properly (left arm).
7
1
Make sure the air plug is securely inserted in the main unit.
2
Stretch cuff into a barrel for the arm can conformable enter into the barrel.
3
Arm penetrate throught the cuff, the air tube of the cuff will pass the top of your palm.
4
Apply the cuff to your upper arm. The color marker is on the inside center of your arm and
make the air tube aligned with your middle forger.
5
The bottom of the cuff should be approximately 2cm~3cm above your elbow.
6
Be fixed with cloths, and wrapped tight cuff, the arm and the cuff should not have gaps.
Chapter10 BP Measurement
10.1 Accurate Measurement Way
Measurement in quiet and relaxing state.
1.Place your arm on a table.
2.The cuff is level with your heart.
3.The palm of the hand is up, and the body relax.
8
Try to measure your blood pressure at the same time each day with the same arm
and the same pose for consistency.
The high and low location of cuff will cause changes in measurement results.
Do not touch Electronic Sphygmomanometer, cuff and windpipe during
measurement.
Measurements should be taken in a quiet place and the body relax.
Remain still 4~5 minutes before measurement.
Relax the body, do not let the muscle activity.
Do not talk and movement during the measurement.
Wait 4~5 minutes between measurements.
Do not use a cellular phone near the device.
10.2 BP Measurement
�Press 【START/STOP】 button to take a measurement.
Start measurement
measurement result
During measurement, please keep correct pose and quiet state, do not move.
Stop Measurement
During measurement, if you wish to stop measuring, press 【START/STOP】 button to stop and
deflate.
�Confirm Measurement Value
Measurement value can be automatically stored.([using memory function] refer to 10 page)
*Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions
of your physician.
Note
� Wait 4-5 minutes between measurements.
When repeated measurements, because, the arm appears congestion, it may not get correct blood
pressure measurement. After the blood flow, take a measurement once again.
� When some factors affect the measurement results in measurement process, error messages
hints will appear on the screen, you can obviate the malfunction and restart a measurement.
�In no physiological alarm state, press any button to carry on the corresponding button function;
9
in audio alarm state, press any button (except 【ON/OFF】 button) to clear up the audio alarm.
④Take off the cuff, hold 【ON/OFF】 button to turn the device off.
*The device will automatically turn off after two minutes in which there is no operation to the
device, even if you forget to turn the power off.
Chapter11 Memory Function
The devicer is designed to store and display the blood pressure, pulse rate values and the date and
time when measured, which are up to 100 items. If there have been 100 items stored, when the
101 measurement have been taken, the earliest results are deleted.
11.1 Review The Memory Value
1.In the main interface (interface when boot-strap), press 【MEMORY】 button to review the
most recent measurement values in large-print with the serial number from 1 to 100.
2.Press 【UP】/【DOWN】 button to circularly switch the former measurement values.
*The right figure shows that there is no Measurement result.
3.Press 【LIST】 button to switch to data table interface.
4.Press 【TREND】 button to display trend interface.
10
5.Finish displaying the measurement values
Press 【EXIT】 to return the main interface or hold 【ON/OFF】 button to turn the power off.
*The device will automatically turn off after two minutes in which there is no operation to the
device, even if you forget to turn the power off.
11.2 Delete Memory Values
Users can delete all values stored in the memory of each user separately instead of deleting a
special item.
1.Press 【MENU】 button to enter 【SYSTEM MENU】, select 【DELETE DATA】 item and
enter its interface, in which select the user whose data will be deleted. All measurement results of
selected user will be deleted after confirm
2.Finish Operation
Select 【CONFIRM】 or 【EXIT】 to return the previous menu, or hold 【ON/OFF】 button
to turn the power off.
*The device will automatically turn off after two minutes in which there is no operation to the
device, even if you forget to turn the power off.
Chapter12 Alarm Function
Alarms are classified into two categories: technical alarm and physiological alarm.
Physiological Alarm
User can press【MENU】button to enter system menu, select【ALARM SETUP】item to enter
its interface, and then set alarm on-off and the high and low alarm limits, when blood pressure is
higher than the high limit or lower than the low limit, the physiological alarm will occur.
11
Press any button to cancel the alarm in physiological alarm state and this method brings no
affection to the next alarm. To close alarm in 【ALARM SETUP】 will disable the alarm
function until switch alarm on.
Technical Alarm
When power is about to exhaust and alarm is on , then the alarm will occur. This alarm can not
be cancelled unless being closed or the power replaced.
Separate Sale
Chapter13 SpO2 Measurement Function(
Function(Separate
Sale))
Please pay attention to:
Warning
Pulse oximeter can overestimate the SpO2 value in the presence of Hb-CO,
◎Pulse
Met-Hb or dye dilution chemicals.
◎ES (Electrosurgery) equipment wire and SpO2 cable must not be tangled up.
◎Do not put the sensor on extremities with arterial catheter or venous syringe.
◎Do not perform SpO2 measuring and NIBP measuring on the same arm at one time,
because obstruction of blood flow during NIBP measuring may adversely affect the
reading of SpO2 value.
Note
◎Make sure the nail covers the light window.
◎the wire should be on the backside of the hand.
◎SpO2 value is always displayed in the fixed place.
12
Warning
Check if the sensor cable is in normal condition before monitoring. After unplugging the
◎Check
SpO2 probe cable from the socket, the interface will return.
Do not use the SpO2 probe once the package or the sensor is found damaged. Instead,
◎Do
you shall return it to the vendor.
◎Prolonged and continuous monitoring may increase jeopardy of unexpected change of dermal
condition such as abnormal sensitivity, erubescence, vesicle, repressive putrescence, Particularly
in newborns or in a Perfusion disorders and changes or immature skin form of the patient.
According to skin quality change, correct optical path alignment and attachment methods to
regularly check the place of SpO2 probe, and change the attachment position when the quality of
skin decline. More frequent examinations may be required for different patients.
Chapter14 Monitoring Procedure
1.Attach the sensor to the appropriate site of the patient finger as following figure.
place SpO2
2.Plug the connector of the SpO2 probe cable into the USB socket in the lower right of the device.
The main interface will switch to SpO2 interface. The update period of data is less than 5 seconds,
which is changeable according to different individual pulse rate. This operation brings no
affection to other functions.
Warning
Uncomfortable or painful feeling may appear if using the device ceaselessly, especially
especially,, for
ion barrier patients. It is recommended that the sensor should not be
the microcirculat
icrocirculation
applied to the same finger for over 2 hours.
Measurement Limitations
During operation, the accuracy of oximeter readings can be affected by:
� High-frequency electrical noise, including noise created by the host system, or noise from
external sources, such as electrosurgical apparatus connected to the system.
� Intravascular dye injections.
� Excessive patient movement.
13
�
�
�
�
�
�
�
�
External light radiation.
Improper sensor installation or incorrect contact position of the patient.
SpO2 probe temperature (optimal temperature between 28°C and 40°C).
Placement of the SpO2 probe on an extremity that has a blood pressure cuff, arterial catheter,
or intravascular line.
Significant concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin and
methemoglobin.
SpO2 too low.
Bad circular injection of the part being measured.
It is required to use SpO2 probe which is provided by our company, contact with our sale
department when changes SpO2 probe.
Chapter15 Maintenance and Cleaning
Warning
Take cuff and the power source off before cleaning the unit or the SpO2 probe.
Caution
� Do not subject the sensor to autoclaving.
� Do not immerse the SpO2 probe into any liquid.
� Do not use any SpO2 probe or cable that may be damaged or deteriorated.
Cleaning:
� Use a cotton ball or a soft mull moistened with hospital-grade ethanol to wipe the surface of
the SpO2 probe, and then dry it with a cloth. This cleaning method can also be applied to the
luminotron and receiving unit.
� The cable can be cleaned with 3% hydrogen dioxide, 70% isopropanol, or other active
reagent. However, connector of the SpO2 probe shall not be subjected to such solution.
14
Chapter16 Installation Of The Software
16.1 Demand Of Editor
Pentium IV 1.8G or more
Operation System:Windows XP
EMS memory: 256M or more
Hard Disk: 40G or more
Display: 17 inch or more
CD-ROM
USB: 2 or more
Resolution of printer: 600 DPI
16.2 Installation Of Software
1.Place the CD-ROM in the CD-ROM compartment located on your computer.
2.If Auto Play for CDs is enabled, place CD in reader and follow instructions when they appear
in the screen; otherwise follow install instructions below:
1.Open Windows Explorer.
2.Click on the root CD-ROM directory.
3.Follow the instructions in the screen.
Refer to "Software Help"for details about the operation method of the PC software.
15
Chapter17 Key
Keyss And Symbols
Signal
Description
Warning – See User Manual
SYS
Systolic pressure
MAP
MAP pressure
DIA
Diastolic pressure
PR
Pulse rate (bpm)
ADU
Adult
PED
Pediatric
NEO
Neonatal
INFO
Information
Open the alarm sound indication
Close the alarm sound indication
Low-power
Full-power
1.no NIBP data to review
2.no finger inserted to SpO2 probe
3.An indicator of signal inadequacy
ClassⅡ equipment
WEEE (2002/96/EC)
BF Applied Part
SN
Serial number
USB or connect SpO2 probe
Chapter18 Error Message
Error message will be displayed in the screen if there is something wrong when measuring. The
causes and solutions are shown as follows:
Error Message
Causes
Solutions
16
Self-test failure
Function abnormal
Please contact us
System failure
Cuff is not connected
Loose cuff
Correctly connect cuff (refer to 8 page)
correctly.
Make sure the cuff plug is securely
Air leakage
Cuff plug fall off
inserted in the windpipe (refer to 8 page)
Air pressure error
Air pressure error
Refer to the troubleshooting
The pulse signal is too weak
Weak signal
Correctly connect cuff (refer to 8 page)
or the cuff is loose.
overpressure
Cuff is blocked or squeezed
Correctly connect cuff (refer to 8 page)
The signal extent is too big
Excessive movement
owing to the arm or body
Over range
moving or other reasons when
Saturated signal
Keep arm, body still, measure again
measuring
Time out
It takes too much time
17
Chapter19 TROUBLESHOOTING
Abnormal
Phenomenons
BP
measurement
values too high or
too low.
Solutions
Cuff is not connected correctly.
Correctly connect cuff (refer to 8
page)
Talk or move arms when
measuring
Keep quiet and restart a measurement
The turnup clothing presses the
arm
Take off the clothing which presses
the arm, and restart a measurement
Cuff leakage
Buy a new cuff
The cuff windpipe is not
Correctly connect
correctly connected with cuff
No pressure
Cuff deflates
short time
Causes
in
Cuff is not inflated
Stop using the device and contact us
Loose cuff
Correctly apply cuff
It can not carry on measurement when press the Switch on the power once again and
measurement button
restart a measurement
Power off suddenly
when inflating
Hold the on/off
button but can not
start the device
No use for a long time, the
power of batteries can be Replace all four batteries with new
exhausted owing to the ones.
changed temperature
Power of batteries can be Replace all four batteries with new
exhausted
ones.
The battery
reversed
polarities
is
Check the battery installation for
proper placement of the battery
polarities.
Cuff inflation start before press the measurement Pull out the cuff to deflate. Stop using
button or never stop inflating when measuring
the device and contact us.
Pull out the cuff to deflate. Stop using
the device and contact us.
Cuff never deflation
Air pressure error
No deflation or deflation error Pull out the cuff to deflate. Stop using
or inflation without stop
the device and contact us.
Others
Keep arm, body still, measure again.
No press value displayed or the value unchanged or Pull out the cuff to deflate. Stop using
change erratically when cuff inflated
the device and contact us.
Switch on the power once again and
restart an operation.
Replace the batteries.
If no, please contact us.
Other phenomenon
18
Chapter20 Clean And Maintenance
*Please follow the instructions in the user manual. If you do not comply, our company will not
assume responsibilities of the quality.
� Frequently clean the Electronic Sphygmomanometer.
� If there is something dirty on the device, clean it with a soft dry cloth.
� If the unit is particularly dirty, you can clean it with a soft cloth
dampened with water or neutral detergent after the cloth can be full
twisted.
Warning
Do not submerge the device in water.
Advice
�
Do not use any naphtha, thinner or gas to clean.
�
Do not attempt to clean or wash the cuff.
Keeping
Advice
Do not place the machine in the following areas:
� Easy to splash water areas.
�
Direct sunlight, extreme hot, humidity, dust, causticity gas areas.
�
Lean or the area which can cause vibration, impact.
�
�
Chemicals or corrosive gas storage areas.
Remove the batteries if the unit will not be used for long time.
Warning
It is recommended that you check if there is any damage on the Sphygmomanometer or the
accessories regularly, if you find any damage, stop using it, and contact our Customer
Service immediately.
In addition, the overall check of the Sphygmomanometer, including the NIBP calibration
and safety check such as the leakage current, should be only performed by qualified
19
personnel once every 12 months.
Warning
The disposal of scrap instrument and its accessories and packing (including batteries
batteries,,
plastic bags, foams and paper boxes) should follow the local laws and regulations.
EMC declaration:
␇ When this device is installed or putted into service, EMC should be paid more attention, as
the portable and mobile RF communications equipment with higher EM interference can affect
this device.
␇ The internal components and cables should not be changed,as this may decreased
IMMUNITY of the device.
␇ The Electronic Sphygmomanometer should not be used adjacent to or stacked with other
equipment.
Classification:
EMC: Group I Class B.
According to the MDD 93/42, the classification of this medical device: Ⅱa.
The type of protection against electroshock: ClassⅡ equipment.
The degree of protection against electroshock: type BF applied part
.
The degree of protection against ingress of water: IPX0.
According to the mode of operation: Continuous.
According to the degree of safely of application in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide: Equipment not suitable for use in the presence
of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
20
Chapter21 NIBP Specification
Name
Electronic Sphygmomanometer
Display
2.8'' color LCD Display
NIBP Specifications
Measurement Method
Oscillometric method
Working modes
Automatic
Measurement Range
Pressure
adult
0~290mmHg(0~38.6kPa)
pediatric
0~235mmHg(0~31.3kPa)
neonatal
0~140mmHg(0~18.6kPa)
Pulse: 40~240/min
Inflation
Alarm Range
Overpressure protect
adult
160mmHg
pediatric
120mmHg
neonatal
70mmHg
adult mode
SYS ALM: 40~270 mmHg
DIA ALM: 10~215 mmHg
pediatric mode
SYS ALM: 40~200 mmHg
DIA ALM: 10~150 mmHg
neonatal mode
SYS ALM: 40~135 mmHg
DIA ALM: 10~100 mmHg
adult mode
295±5mmHg
pediatric mode
240±5mmHg
neonatal mode
145±5mmHg
Resolution
Pressure
1mmHg
Measurement Accuracy
Cuff Pressure Accuracy
±3mmHg
Error
The BP Value of the device is equivalence with the measurement
value of Stethoscopy. The error meets all the conditions in the
ANSI/AAMI SP-10:2002+A1:2003 +A2:2006.
Operating
Temperature/ Humidity
+5ºC~40 ºC
.
15%RH~80%RH
Transport and Storage
Temperature/Humidity
-20ºC~+55ºC
.
≤95%RH
Atmospheric pressure
80kPa~105kPa
Battery
4 "AA" alkaline batteries, AC Adapter separately sold
Main Unit Dimensions
130(L)*110(W)*80mm(H)
Main Unit Weight
300gram
21
Accessories
Standard Configure:
Adult Cuff: limb circumference 22-32cm (middle of upper arm )
Software CD, User Manual, USB data line, four "AA" alkaline
batteries
Separate Sale:
Pediatric Cuff: limb circumference 10-19cm (middle of upper
arm )
Neonatal Cuff: limb circumference 6-11cm (middle of upper
arm )
AC Adapter
Input: AC 100-240V 50-60Hz AC 500mA
Output: DC 6.0V 1.0A
22
Chapter22 SpO2 Specification
Name
SpO2 Probe (Accessory Separate Sale)
Model
Y10UCH150
Measurement Range
SpO2 Measuring Range: 0%~100%;
Pulse Rate Measuring Range: 30bpm~250bpm;
Resolution
SpO2
1%
PR
1bpm
Measurement Accuracy
SpO2,
PR
70%~100%
±2%
0%~69%
undefined
±2bpm or ±2% (select larger)
Measurement Performance In Weak Filling Condition
pulse-filling
ratio
0.4%
:
SpO2 error
±4%,
pulse rate error
±2bpm or ±2% (select larger)
Optical Sensor
Red light
wavelength is 660nm, 6.65mW
Infrared
wavelength is 880nm, 6.75mW
23