Vizio VP42HDTV20A User manual

VIZIO VP422 HDTV10A User Manual

Dear VIZIO Customer,

Congratulations on your new VIZIO VP422

HDTV10A High Definition Plasma Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VP422 HDTV10A.

For assistance, please call (877) 698-4946 or email us at

[email protected]

.

To purchase or inquire about accessories and installation services for your VIZIO PLASMA

HDTV, please visit our website at

www.VIZIO.com

or call toll free at 888-VIZIOCE

(888-849-4623).

We recommend you register your VIZIO VP422

HDTV10A either at our website

www.VIZIO.com

or fill in your registration card and mail it in. For peace of mind and to protect your investment beyond the standard warranty, VIZIO offers onsite extended warranty service plans. These plans give additional coverage during the standard warranty period. Visit our website or call us to purchase a plan.

Write down the serial number located on the back of your VIZIO VP422 HDTV10A.

__ __ __ __ __ __ __ __ __ __ __ __ __ __

Purchase Date _____________________

VIZIO is a registered trademark of V, Inc. dba V, INC.

HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories

Dolby and the double-D symbol are trademarks of Dolby Laboratories

Version 5/29/2008 1

www.VIZIO.com


This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

•

•

To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the VP422

HDTV10A.

Unplug the power cord before cleaning the VP422 HDTV10A PLASMA. A damp cloth is sufficient for cleaning the VP422 HDTV10A. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

• Always use the accessories recommended by the manufacturer to insure compatibility.

•

When moving the VP422 HDTV10A from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the VP422 HDTV10A immediately after this to avoid causing fire, electric shock or component damage.

•

Do not place the VP422 HDTV10A on an unstable cart, stand, or table. If the VP422 HDTV10A falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VP422 HDTV10A.

• A distance of at least 3 feet should be maintained between the VP422 HDTV10A and any heat source, i.e. radiator, heater, oven, amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.

•

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VP422

HDTV10A and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VP422 HDTV10A in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slot on the VP422 HDTV10A cabinet. Do not place any objects on the top of the product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the VP422 HDTV10A.

•

The VP422 HDTV10A should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

•

•

The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

The VP422 HDTV10A is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely.

Do not defeat the safety purpose of the grounded plug.

•

Appliance inlet (or AC inlet) is used as the disconnect device.

•

Use only with the cart, stand, tripod, bracket or table specified by manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• The lightning flash with arrowhead symbol , within an equilateral triangle, is intended to alert the user to the presence of not isolated dangerous voltage within the inside of the product that may be sufficient magnitude to constitute a risk of electric shock to persons. to

•

The exclamation point within an equilateral triangle is intended to alert the user the presence of important operating and servicing instructions in the literature accompanying the appliance.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

•

The wall socket shall be installed near the equipment and shall be easily accessible.

•

Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

•

Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VP422 HDTV10A from damage due to power surges.

•

Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.

• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

•

Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.

•

•

Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.

Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.

•

Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the product.

• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.

•

•

To reduce risk of electric shock, do not touch the connector with wet hands.

Version 5/29/2008 2

www.VIZIO.com


• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote controller.

•

If any of the following occurs please contact the dealer: o

The power connector fails or frays. o

Liquid sprays or any object drops into the VP422 HDTV10A. o

The Display is exposed to rain or other moisture. o

The Display is dropped or damaged in any way. o

The performance of the Display changes substantially.

• Operating environment. Temperature: 0˚C ~ 35˚C, Humidity: 20% ~ 80% non-condensing, Altitude: 0 ~ 2000m

External Television Antenna Grounding

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the High Definition TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.

Remember, the screen of the coaxial cable is intended to be connected to earth in the building

installation.

Version 5/29/2008 3

www.VIZIO.com


Opening the Package

Your VIZIO VP422 HDTV10A and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VP422 HDTV10A is in good condition and that all of the accessories are included.

The VP422 HDTV10A weighs approximately 63lbs and is about 42” wide and we advise that you take sensible lifting precautions when you unpack and install the HDTV.

The screen can easily be scratched or broken so please handle the product gently and never place the

HDTV with the glass facing downwards on a surface without protective padding.

IMPORTANT: Save the carton and packing material for future shipping.

Package Contents

VIZIO VP422 HDTV10A

VIZIO Remote Control VR2

Power Cord

This User Manual

Quick Setup Guide

Safety Strap

Registration Card

VIP Services Brochure

2 (Double A) Batteries for the Remote Control

VIZIO Warranty and Repair Information

Version 5/29/2008 4

www.VIZIO.com


Additional Certified Accessories for the VIZIO

VP422 HDTV10A are sold separately

Wall Mounts

High Definition Cables

Extra or replacement Remote

VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VP422 HDTV10A

To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.com

or call us toll free at 888-VIZIOCE (888-849-4623)

Installation Preparation

Please read this user manual carefully before installing your VIZIO HDTV.

The power consumption of the High Definition TV is about 350W, please use the power cord designated for TV. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.

The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space between the back of the High Definition TV and the wall. If you would like to mount your TV on the wall, please see below ‘Preparing Your PLASMA HDTV for Wall Mounting’ for additional information. Avoid installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.

Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce poor ventilation and excessive component damage.

VIZIO offers professional installation services. Please contact VIZIO for more information on these services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com

.

Attaching the Safety Strap

For when the VP422 HDTV10A is not mounted on the wall with a Wall Mount, a Safety Strap has been included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety

Strap should be used with common sense practice such as ensuring that children (or adults) do not climb up, grabbing the top of the HDTV and pulling it onto themselves.

1. Fix one end of the strap to the wall. If you have a drywall finish it is preferable to fix it to a stud, using a washer underneath the screw head. If you have a solid wall you should use a lag bolt, again using a washer under the nut.

2. Fix the other end of the Safety

Strap to one of the upper wall mounting holes on the back of the HDTV, using a washer under the screw head.

Version 5/29/2008 5

www.VIZIO.com


Preparing Your PLASMA HDTV for Wall Mounting

1.

2.

3.

4.

5.

Unplug all of the cables and cords from your VIZIO VP422 Plasma

HDTV10A.

Place the VP422 PLASMA face down on a soft and flat surface

(blanket, foam, cloth, etc) to prevent any damage to the TV.

Remove the cover on the stand.

Remove the eight (8) screws holding the base to the VP422

PLASMA.

Carefully remove the stand base.

Now, the VP422 Plasma HDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the High Definition TV.

Please make sure to read the instructions of your specific mount to properly hang the

VP422 Plasma HDTV10A.

The pitch of the mounting holes is 400mm horizontally and 200mm vertically.

The screw type required is metric M6, 20mm long, 1.0mm pitch. The length of the screws will depend on the thickness plate being attach to the TV; our brackets come with different length screws.

To find the perfect mount for the VIZIO VP422 Plasma, browse VIZIO’s certified mount selection at www.VIZIO.com

or call directly 888-VIZIOCE (888-849-4623).

Version 5/29/2008 6

www.VIZIO.com


Chapter 1 Basic Controls and Connections ................................

................................

9

1.1 Front Panel..........................................................................................................................................................9

1.2 Right Side Panel Controls ...................................................................................................................................9

1.3 Rear Panel Connections ...................................................................................................................................10

1.4 Right-Side Panel Connection ............................................................................................................................11

1.5 VIZIO Remote Control.......................................................................................................................................12

1.5.1 Insertion of Batteries in the Remote Control ..............................................................................................13

1.5.2 Remote Control Range ..............................................................................................................................13

1.5.3 VIZIO Remote Control Precautions ...........................................................................................................13

................................

................................

.................

14

2.1 Which Video Connection Should I Use?............................................................................................................14

2.2 Connecting Coaxial (RF) ...................................................................................................................................15

2.2.1 Using Your Antenna or Digital Cable for DTV /TV .....................................................................................15

2.2.2 Using the Antenna or Cable through your VCR .........................................................................................15

2.3 Connecting Your HDTV Set-Top Box ................................................................................................................16

2.3.1 Using HDMI ...............................................................................................................................................16

2.3.2 Using Component Video............................................................................................................................18

2.4 Connecting Your Basic Set-Top Box .................................................................................................................19

2.4.1 Using Composite Video .............................................................................................................................19

2.4.2 Using Coaxial (RF) ....................................................................................................................................19

2.5 Connecting Your DVD Player ............................................................................................................................20

2.5.1 Using HDMI ...............................................................................................................................................20

2.5.2 For DVD Players with DVI: ........................................................................................................................21

2.5.3 Using Component Video............................................................................................................................22

2.5.4 Using S-Video (AV)....................................................................................................................................23

2.5.5 Using Composite (AV) Video .....................................................................................................................23

2.6 Connecting Your VCR or Video Camera ..........................................................................................................24

2.7 Connecting an external Receiver/Amp ..............................................................................................................25

2.7.1 Optical Output of Audio received with HD Programs .................................................................................25

2.8 Connecting a PC Computer ..............................................................................................................................26

2.8.1 Preset PC Resolutions...............................................................................................................................27

................................

................................

28

3.1 Basic PLASMA HDTV Start Up .........................................................................................................................28

3.2 Watching a TV Program ....................................................................................................................................33

3.3 Adjusting Basic HDTV Settings .........................................................................................................................34

3.4 Program Information..........................................................................................................................................35

3.5 Information on HDTV Status .............................................................................................................................35

................................

................................

..

36

4.1 Using the On Screen Display (OSD) .................................................................................................................36

4.2 DTV / TV Input Picture Adjustment....................................................................................................................37

4.2.1 Picture Mode .............................................................................................................................................37

4.2.2 Brightness..................................................................................................................................................38

4.2.3 Contrast .....................................................................................................................................................38

4.2.4 Color ..........................................................................................................................................................38

4.2.5 Tint.............................................................................................................................................................39

4.2.6 Sharpness .................................................................................................................................................39

4.2.7 Color Temperature.....................................................................................................................................40

4.2.8 Advanced Video ........................................................................................................................................40

4.3 DTV / TV Input Audio Adjustment......................................................................................................................42

4.3.1 Volume ......................................................................................................................................................42

4.3.2 Bass...........................................................................................................................................................42

4.3.3 Treble ........................................................................................................................................................43

4.3.4 Balance......................................................................................................................................................43

4.3.5 Surround....................................................................................................................................................43

4.3.6 Digital Audio Out........................................................................................................................................43

4.3.7 Speakers ...................................................................................................................................................44

4.3.8 Lip Sync.....................................................................................................................................................44

4.4 DTV / TV Tuner Setup.......................................................................................................................................45

4.4.1 Tuner Mode ...............................................................................................................................................45

Version 5/29/2008 7

www.VIZIO.com


4.4.2 Auto Search...............................................................................................................................................45

4.4.3 Skip Channel .............................................................................................................................................45

4.4.4 MTS ...........................................................................................................................................................46

4.4.5 Time Zone .................................................................................................................................................46

4.4.6 Daylight Saving..........................................................................................................................................46

4.5 DTV / TV Input Setup ........................................................................................................................................47

4.5.1 Language...................................................................................................................................................47

4.5.2 Sleep Timer ...............................................................................................................................................47

4.5.3 Wide ..........................................................................................................................................................47

4.5.4 Input Naming .............................................................................................................................................48

4.5.5 Closed Caption (CC)..................................................................................................................................49

4.5.6 Closed Caption On Mute (CC On Mute) ....................................................................................................49

4.5.7 Digital Closed Caption Style (Digital CC Style)..........................................................................................50

4.5.8 Reset All Settings ......................................................................................................................................50

4.5.9 Image Cleaner ...........................................................................................................................................50

4.6 DTV / TV Input Parental Control........................................................................................................................51

4.6.1 Channel Block ...........................................................................................................................................51

4.6.2 TV Rating...................................................................................................................................................52

4.6.3 Movie Rating..............................................................................................................................................53

4.6.4 Check for New DTV Rating........................................................................................................................53

4.6.5 Blocked Unrated Programming..................................................................................................................54

4.6.6 Change the Password ...............................................................................................................................54

4.7 HDMI Input Picture Adjustment .........................................................................................................................55

4.8 HDMI Input Audio Adjustment ...........................................................................................................................55

4.9 HDMI Input Setup..............................................................................................................................................55

4.10 Video Input Picture Adjustment .......................................................................................................................56

4.11 Video Input Audio Adjustment .........................................................................................................................56

4.12 Video Input Setup............................................................................................................................................57

4.12.1 Auto Phase (for Component input) ..........................................................................................................57

4.13 Video Input Parental Control ...........................................................................................................................57

4.14 PC Input Picture Adjustment ...........................................................................................................................58

4.14.1 Auto Adjust ..............................................................................................................................................58

4.14.2 Brightness................................................................................................................................................58

4.14.3 Contrast ...................................................................................................................................................59

4.14.4 Color Temperature...................................................................................................................................59

4.14.5 H-SIZE.....................................................................................................................................................60

4.14.6 H. Position ...............................................................................................................................................60

4.14.7 V. Position ...............................................................................................................................................60

4.14.8 Fine Tune ................................................................................................................................................60

4.15 PC Input Audio Adjustment .............................................................................................................................61

4.16 PC Input Setup ................................................................................................................................................61

4.17 Understanding Viewing Features ....................................................................................................................62

4.17.1 Viewing Modes ........................................................................................................................................62

4.18 Using a Cable or Satellite Remote ..................................................................................................................63

................................

............................

63

5.1 Maintenance......................................................................................................................................................63

5.2 Troubleshooting Guide ......................................................................................................................................64

5.3 Telephone & Technical Support ........................................................................................................................66

5.4 Compliance .......................................................................................................................................................67

5.5 FCC Class B Radio Interference Statement......................................................................................................67

................................

................................

..........

68

6.1 Specifications ....................................................................................................................................................68

6.2 Glossary – Standard Definitions ........................................................................................................................69

6.3 Index .................................................................................................................................................................70

Version 5/29/2008 8

www.VIZIO.com


Chapter 1 Basic Controls and Connections

1.1

Front Panel

POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and orange when powered off.

REMOTE CONTROL SENSOR – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.

1.2

Right Side Panel

Power ( ) – Switch the VP422 HDTV10A on by pressing the button once. Press the button again to turn the VP422 HDTV10A off.

Menu – This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this button will return to the previous menu level.

Channel +/- – Use these buttons to step up or down the TV channels. While the

OSD is active, these buttons function as up and down controls in the OSD menus.

Volume +/- – Use these buttons to increase or decrease to the speaker volume.

While the OSD is active, these buttons function as left and right controls in the

OSD menus.

Input – Repeated pressing of this buttons steps through the input sources in the following sequence: TV, AV (S-VIDEO), Component, RGB, HDMI1, HDMI2 and

HDMI3. Once you have stepped through the entire sequence, you will return to the beginning.

Version 5/29/2008 9

www.VIZIO.com

1.3

Rear Panel Connections

4

1 2


6 9

3

5

7 8 10

1.

2.

AC IN – Plug-in the supplied AC Power Cord here.

SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment.

3.

4.

5.

6.

7.

8.

9.

HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the High

Definition TV indicates this connection.

HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the High

Definition TV indicates this connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the Analog Audio output of the device to the L+R

AUDIO here. Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).

RGB PC – Connect the video and audio from a computer here. The blue color band on the rear of the High Definition TV indicates this connection. A 1/8” plug stereo cable is needed to connect the audio out from the computer to the 1/8” jack connector in the rear of the High

Definition TV.

COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here. From left to right, use white for left audio, red for right audio, green for Y, blue for Pb (or Cb) and red for Pr (or Cr) inputs. The green color band on the rear of the High Definition TV indicates this connection.

AV/S-VIDEO – Connect the source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source.

This connection is on rear side of the High Definition TV. The signal being carried by the S-

Video cable and connector; if connected, will take priority over the video (yellow connector)

RCA connector. Keep in mind that if audio is needed then left (white connector) and right (red connector) cables are needed to be connected also.

OPTICAL AUDIO OUT – When an audio signal is associated with an input which is selected for viewing, the audio associated with the programming will be available on this SPDIF

Optical connector for connection to your home theatre system. The white color band on the rear of the TV indicates this connection.

ANALOG AUDIO OUT – Connect the audio from the PLASMA HDTV to an external device, such as a home theatre system, external amplifier or stereo. Speakers cannot be connected directly to here. The white color band on the rear of the TV indicates this connection.

10. DTV/TV – Connect to an antenna or digital cable (no Cable Box) for Digital TV.*

* For digital TV stations in your area visit www.antennaweb.org

.

Version 5/29/2008 10

www.VIZIO.com


1.4

Right Side Panel Connection

1. HDMI 3 - Connect the third source for digital video such as a DVD multimedia player or set top box through this all digital connector.

The white color band on the side of the TV indicates this connection.

1

Version 5/29/2008 11

www.VIZIO.com


1.5

VIZIO Re mote Control

GUIDE – This button displays program information. Press this button once and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen.

POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the

Standby mode.

TV – Press this button to select TV.

AV – Press this button to select the Audio Video input. Pressing this button repeatedly will get you to the AV input. Keep in mind that if S-Video cable is being used, then AV will show the signal going through this input as the Svideo takes priority.

COMP – Press this button to select the Component (YPbPr) input. Pressing this button repeatedly will take you through the Component input.

HDMI – Press this button to select the HDMI input. Pressing this button repeatedly will get you through the HDMI (HDMI1, HDMI2 and HDMI3) different inputs.

MENU – Use this button for the On-Screen Display (OSD) menus. When use within the OSD menus, pressing this key will make the selection of an option.

- These buttons navigate the On-Screen Display (OSD).

MUTE – This button turns the sound on and off.

LAST – This button recalls the previously viewed channel when it is used in

TV mode; meaning that the TV unit has control over the signal or program being watched. This button also has different functions when being used in conjunction with the On-Screen Display (OSD) menu.

VOL (+ or -) – These buttons turn the volume up or down.

CH (+ or -) – These buttons change the channels up or down.

NUMBER BUTTON PAD – Use these buttons to select a channel or enter a password.

INPUT – This button allows the user to cycle through the inputs. Repeatedly pressing of this button will step you through the input sources in the following sequence: TV, AV

(S-Video), Component, RGB, HDMI1,

HDMI2 and HDMI3. Once you have stepped through the entire sequence, you will return to the beginning.

- (DASH) – When selecting a digital channel directly, use this button for the separation of main and sub-channels. For example, channel 28-2 would be selected by the button sequence 2 8 – 2.

Version 5/29/2008 12

www.VIZIO.com


1.5.1

Insertion of Batteries in the Remote Control

Press and slide out the battery cover by following the direction shown by the molded arrow on the surface of the cover.

Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment.

Press and slide the battery cover back into place.

Precautionary Tips for Inserting the Batteries:

Only use the specified AA batteries.

Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.

Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.

Dispose of the batteries in accordance with local laws and regulations.

Keep the batteries away from children and pets.

1.5.2

Remote Control Range

Point the remote control at the remote control sensor to transmit the commands.

Do not place any obstacles between the remote control and the receiver window.

The effective range of the remote control is approximately 30 feet (10 meters) from the front of the receiver window, 30° to the left and right, 20° up and down.

1.5.3

VIZIO Remote Control Precautions

The remote control should be kept dry and away from heat sources. Avoid humidity.

If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.

When not using the remote control for a long period of time, remove the batteries.

Do not take the batteries apart, heat them, or throw them into a fire.

Do not subject the remote control to undue physical stress, such as striking or dropping it.

Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.

Version 5/29/2008 13

www.VIZIO.com


Chapter 2 Connecting Equipment

2.1

Which Video Connection Should I Use

The VIZIO VP422 HDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.

Connection

Quality (type)

Connector

Rear

Panel

Color

Codes

Description

Best

(digital)

Best

(digital)

- - - - - - - - - - - -

Good

(analog)

Best

(analog)

Better

(analog)

Good

(analog)

White

Black

Blue

Green

Yellow and

Red

HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, alldigital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television (DTV), over a single cable.

DTV Coaxial RF. When used for MPEG2 encoded bit streams from ATSC broadcast programming, this input takes advantage of the High Definition content.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

TV Coaxial RF. This is the connection for standard

NTSC TV using antenna or cable.

RGB PC (VGA) – This video input has separate red, green and blue color components. The signal carries horizontal and vertical sync information on the green signal. This is most commonly used for

PC input.

Component - The video signal is separated into three signals, one containing the black-and-white information and the other two containing the color information. This enhancement over S-Video takes advantage of the superior picture provided by progressive scan DVD players and HDTV formats.

Composite (AV) - The complete video signal is carried through this single (yellow) pin connector.

This is the most commonly used video connection.

S-Video (AV) - The video signal is separated into two signals, one containing the black-and-white information and the other containing the color information. Separating the color in this way avoids

‘cross color’ effects where closely spaced black and white lines are erroneously displayed in color. It also enables text to be displayed more sharply.

Note: For more info refer to the Quick Start Guide

Version 5/29/2008 14

www.VIZIO.com


2.2

Connecting Coaxial (RF)

2.2.1

Using Your Antenna or Digital C able for DTV /TV

1.

2.

3.

4.

Turn off the power to the HDTV.

Connect the coaxial (RF) connector from your antenna or digital cable (out-ofthe-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector.

Turn on the power to the HDTV.

Select DTV using the INPUT button on the remote or side of the High

Definition TV, or directly by pressing the TV button on the Remote Control.

Note: a) b) c) d)

Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator.

Digital broadcasts are not available in all areas. Refer to www.antennaweb.org

for detailed information.

Make sure the antenna and coaxial cable are correctly grounded.

For Professional antenna installation contact us at www.VIZIO.com

or call 1-888-VIZIOCE (1-888-849-4623).

2.2.2

Using the Antenna or Cable through your VCR

1.

2.

3.

4.

Turn off the power to the HDTV and VCR.

Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the High

Definition TV.

Turn on the power to the HDTV and VCR.

Select TV using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the TV button on the Remote Control.

Version 5/29/2008

Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR.

15

www.VIZIO.com


2.3

Connecting Your HDTV Set Top Box

2.3.1

Using HDMI

HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the

PLASMA HDTV for optimal results.

Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10 meters. See www.VIZIO.com

or call 1-888-VIZIOCE (1-888-849-4623) for details.

1.

2.

3.

4.

5.

Note: a) b)

Turn off the power to the HDTV and HDTV Set-Top Box.

Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input (white color area) at the rear of the High Definition TV.

Turn on the power to the HDTV and HDTV Set-Top Box.

Select HDMI 1 using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the HDMI button on the Remote Control.

If HDMI 1 is being used, use either HDMI2 or HDMI3 as the input and follow steps 1 through

3; and then select the corresponding HDMI input in step 4.

The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.

Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.

Version 5/29/2008 16

www.VIZIO.com

For HDTV Set Top Boxes with DVI


1.

2.

3.

4.

5.


Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the High Definition TV.

Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVI output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the HDMI input (white area) at the rear of the

High Definition TV.


Select HDMI2 using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the HDMI button on the Remote Control.

Note: a) b)

The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.


Version 5/29/2008 17

www.VIZIO.com


2.3.2

Using Component Video

1.

2.

3.

4.

5.

6.

7.


Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y

(green color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High

Definition TV.

Connect the Pb (blue color) connector on your HDTV Set-Top Box to the corresponding Pb

(blue color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition

TV.

Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.

Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the Component output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the Component input (green color area) at the rear of the High Definition TV.


Select Component using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the COMP button on the Remote Control.

Note:


Version 5/29/2008 18

www.VIZIO.com


2.4

Connecting Your Basic Set Top Box

2.4.1

Using Composite Video

1.

2.

3.

4.

5.

Turn off the power to the HDTV and Set-Top Box.

Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding

Video (yellow color) connector in the AV group (yellow color area) at the rear of the High Definition TV.

Using the white and red connectors, connect the cable to the audio output connectors associated with the Video output on your Set-Top Box and connect the other end to the audio connectors associated with the AV input (yellow color area) at the rear of the High Definition TV.

Turn on the power to the TV and Set-Top Box.

Select AV using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the AV button on the Remote Control.

2.4.2

Using Coax ial (RF)

1.

2.

3.

4.

Turn off the power to the HDTV and Set-Top Box.

Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the DTV/TV input at the rear of the High Definition TV.

Turn on the power to the HDTV and Set-Top Box.

Select TV using the INPUT button on the remote or side of the High Definition

TV, or directly by pressing the TV button (below the GUIDE button) on the Remote Control.

Note: Refer to your Set Top Box user manual for more information about selecting the video or RF output of the product.

Version 5/29/2008 19

www.VIZIO.com


2.5

Connecting Your DVD Player

You have several options for connecting your DVD player to your VIZIO VP422 HDTV10A; HDMI,

Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you.

2.5.1

Using HDMI

DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VP422 HDTV10A for optimal results.

Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters.

See www.VIZIO.com

or call 1-888-VIZIOCE (1-888-849-4623) for details.

Connecting your DVD Pl ayer (Best)::::

3.

4.

5.

Version 5/29/2008

1. Turn off the power to the High Definition TV and DVD player.

2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI Input (white color area) at the rear of the High Definition TV.

Turn on the power to the High Definition TV and DVD player.

Select HDMI 1 using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the HDMI button on the Remote Control.

If HDMI 1 is being used, connect to either HDMI 2 or HDMI 3 as the input and follow steps 1 through 3; and then select the corresponding HDMI input step 4.

20

www.VIZIO.com


2.5.2

For DVD Players with DVI

1.

2.

3.

4.

5.

Version 5/29/2008

Turn off the power to the High Definition TV and DVD player.

Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the

HDMI Input (white color area) at the rear of the High Definition TV.

Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the High Definition HDTV.

Turn on the power to the High Definition TV and your DVD player.

Select HDMI 2 using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the HDMI button on the Remote.

Note: Refer to your DVD player user manual for more information about the video output requirements of the product.

21

www.VIZIO.com


2.5.3

Using Component Video

1.

2.

3.

4.

5.

6.

7.

Version 5/29/2008

Turn off the power to the High Definition TV and DVD player.

Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.

Connect the Pb (blue color) connector on your DVD player to the corresponding Pb (blue color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.

Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.

Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the Component output on your DVD player and connect the other end to the audio connectors associated with the Component input (green color area) at the rear High Definition TV.

Turn on the power to the High Definition TV and DVD player.

Select Component using the INPUT button on the remote or side High Definition TV, or directly by pressing the COMP button on the Remote Control.

Note: Refer to your DVD player user manual for more information about the video output requirements of the product.

22

www.VIZIO.com


2.5.4

Using S Video (AV)

1.

2.

3.

4.

5.

Turn off the power to the HDTV and DVD player.

Connect the S-Video jack on the rear of your

DVD player to the S-Video jack in the AV/S-

VIDEO group (yellow/red color area) on the back High Definition TV.

Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors associated with the AV/S-VIDEO input on the back side High Definition TV.

Turn on the power to the TV and DVD player.

Select AV using the INPUT button on the remote or side High Definition TV, or directly by pressing the AV button on the Remote Control.

2.5.5

Using Composite (AV) Video

1.

2.

3.

4.

5.

.

Turn off the power to the HDTV and DVD player.

Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV group (yellow/red color area) at rear of the High Definition TV.

Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding

R (red color) and L (white color) audio input connectors in the AV group (yellow/red color area).

Turn on the power to the TV and DVD Player.

Select AV using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the AV button on the Remote Control.

Note:

Refer to your DVD player user manual for more information about the video output requirements of the product.

Version 5/29/2008 23

www.VIZIO.com


2.6

Connecting Your VCR or Video Camera

1.

2.

3.

4.

5.

Version 5/29/2008

Turn off the HDTV and VCR or Video Camera.

Connect the S-Video jack on the rear of your

VCR or Video Camera to the S-Video jack in the

AV group on the rear side of the High Definition

TV.

Connect an audio cable (white and red connectors) cable to the audio output connectors associated with the S-Video output on your VCR or Video Camera and connect the other end to the audio connectors associated with the AV input on the back side of the High Definition TV.

Turn on the power to the HDTV and VCR or Video Camera.

Select AV using the INPUT button on the remote or side of the High Definition TV.

Note:

Refer to your VCR or Video Camera user manual for more information about the video output requirements of the product.

24

www.VIZIO.com


2.7

Connecting an external Receiver/Amp

2.7.1

Optical Output of Audio

If your sound system has a SPDIF (optical) audio input you can connect it to the OPTICAL AUDIO OUT

(white area) at the rear of the PLASMA HDTV. This is active when receiving digital audio with the program being viewed no matter what input (TV, AV, Component or HDMI) is being used.

1.

2.

Turn off the power to the PLASMA HDTV and Receiver/Amp.

Using an audio cable (optical cable), connect the cable to the audio input connector on the Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connector at the rear

Note: a) b)

3.

4.

5. of the PLASMA HDTV.

Turn on the power to the PLASMA

HDTV and Receiver/Amp.

Then press the MENU button on the remote control to open the On-Screen

Display (OSD) menu.

Press the on the remote control to select the Audio menu.

6.

7.

Press the on the remote control to select SPEAKERS.

Press the on the remote control to select OFF so that the sound from the

PLASMA HDTV will now be routed through your Receiver/Amp system.

Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed.

Refer to your Receiver/Amp user manual to select the corresponding audio input.

The audio output can not be connected directly to external speakers.

Version 5/29/2008 25

www.VIZIO.com

2.8

Connecting a PC Computer


1.

2.

3.

4.

5.

Note: a) b)

Turn off the power to the High Definition TV and PC Computer.

Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the High Definition TV.

Connect the Audio Out on your pc computer to the RGB PC Audio (this connection will require an 1/8” stereo mini plug at the end which goes into the TV) input (blue area) at the rear of the High Definition TV.

Turn on the HDTV and PC Computer.

Select RGB using the INPUT button on the remote or side of the High Definition TV.

For the best picture quality when connecting a pc computer through RGB PC, set your pc computer timing mode to VESA 1366 x 768 at 60Hz. Please refer to the pc or graphic card’s user guide for additional information on how to set the timing mode and the video output requirements of the product.

A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an electronics store.

Version 5/29/2008 26

www.VIZIO.com


2.8.1

Preset PC Resolu tions

If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366 x768 at 60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). Please see the table below for the factory preset resolutions.

Resolution Refresh (Hz) H.Freq (kHz) V.Freq (Hz) H.Sync V.Sync Pixel Freq (MHz)

640x480 60 31.5 59.94 N N 25.175

640x480

720x400

75

70

37.5

31.46

75.00

70.08

N

N

N

P

31.500

28.320

800x600

800x600

800x600

1024x768

60

72

75

60

37.9

48.077

46.9

48.4

60.317

72.188

75

60.01

P

P

P

N

P

P

P

N

40.000

50.000

49.500

65.000

1024x768

1024x768

1360 x 768

1366 X 768

70

75

60

60

NOTES: N = Negative, P = Positive

56.476

60.0

47.700

47.550

70.069

75.03

60.000

59.810

N

P

P

P

N

P

N

N

75.000

78.750

85.500

85.500

Version 5/29/2008 27

www.VIZIO.com


Chapter 3 Setting Up to Watch Television

For ‘Preparing Your PLASMA HDTV for Wall Mounting’, see page 6.

3.1

Basic PLASMA HDTV Start Up

1. Connecting the Power Cable

Connect the power cord to the power cord connector on the back of the High Definition TV, and then plug the power cord into an AC wall socket.

2. Connect Audio and Video Cables to the HDTV

(see pages 14 ~ 26 for detailed steps)

3. Turning Power On

Once all the components are connected, press the Power ON button on the side of the High

Definition TV, or press the Power ON (Orange) button on the remote control.

4. Initial Setup

After powering on the TV set, the Initial

Setup screen will come up; please press the button on the remote control. a. The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the OSD language to

Español or Français, press the button on the remote control to select the language you want.

Press the button on the remote to go to the next screen.

Note:

At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other equipment is being used; please press the LAST key on the remote control and go to Step 5. If this is not your case, please continue at Step b.

Version 5/29/2008 28

www.VIZIO.com

VIZIO VP422 HDTV10A User Manual b. The Tuner screen will be displayed; default choice is

Antenna. If you are using Cable

(No Box) Service, press the button on the remote control to highlight CABLE.

Press the button on the remote to go to the next screen. c. The Channel Scan screen will be displayed; default choice is Scan.

Press the button on the remote control to commence the search for available channels to be stored into memory.

If you do not want to scan for channels at this time, press the

LAST key on the remote control.

Note: If you select to skip this step by pressing the LAST key, next time that you decide to complete this procedure; you will need to select the TV as input (through the Input key) and then go through the Menu option to select the Tuner setup to get the option of scanning the channels again.

Version 5/29/2008 29

www.VIZIO.com

VIZIO VP422 HDTV10A User Manual d. The screen will now change to show the progress of the search for Analog (NTSC) and Digital

(ATSC) channels.

Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org

to get information about availability in your area, type of antenna and in which direction to point your antenna. The channel availability through cable depends upon which channels your cable operator supplies in Clear QAM; consult your cable operator for more information. e. When finished, the Complete screen will be displayed to inform you that the HDTV has completed the Initial Setup.

Press the button on the remote control to exit and begin watching TV.

5. Select Input Source

Select the Input Source for the HDTV by pressing the INPUT button on the side of the High Definition TV or using the Input button on the remote control. Pressing this button will cycle you through the following options: TV, AV (S-VIDEO), Component,

RGB, HDMI1, HDMI2 and HDMI 3.

Now follow the procedure below to display channels from a different signal (External TV Tuner, VCR, Cable Box or Satellite

Receiver) source, using different inputs at the back of your TV set.

a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors,

Component (Red, Green, Blue plus Red and White) connectors,

Version 5/29/2008 30

www.VIZIO.com


HDMI connectors or Separate-Video (S-Video) plus Red and White connectors (if applicable). Make the physical connection or hook up. b. If you have an HD service you must use the HDMI (best) or Component connection.

Note: Composite (AV) and S-Video (AV) Cables can only be used for SD (480i) pictures. c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there is no picture, make sure you have selected the correct input on the TV set. d. If the selected input is RF, you should be aware that the TV set needs to be on either channel 3 or channel 4 matching the channel which has been selected on the back of the

VCR, Cable Box, External TV Tuner or Satellite Receiver; please refer to Owner or

User’s Manual of such equipment for details.

Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR,

External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal. Be aware that the channel to be selected varies from provider to provider; meaning that, you may have to call your provider company so they could provide you the specific channel when using high definition TV sets. Some examples of these channels are: 105, 106, 115 and 116.

6. Fine Tuning your TV set for Home Use.

After completing Procedure 4 or Procedure

5; please follow the steps below to optimize your TV set display: a. Press the MENU button to bring up the

Menu display. Use the or button to scroll to the Color Temperature option. b. Press the button to select it. c. Press either or button to change setting to Normal, and then press the LAST key again to go back to previous screen.

Version 5/29/2008 31

www.VIZIO.com

VIZIO VP422 HDTV10A User Manual d. Press either or button to select the

Picture Mode option. e. Press either or button to change the

Picture Mode option to Standard. f. Press the LAST key repeatedly to exit the on screen display Menu.

Note

: If Procedure 4 had been done, you would like to do the following to ensure that the correct program times are shown when pressing the

Guide key:

Press the MENU button, this will bring up the picture mode menu.

Pressing either or button scroll across to the icon showing the little satellite dish or antenna.

The next screen will appear showing Time Zone.

Press either or button to select the Time

Zone option.

Press either or button to choose the proper

Time Zone of your area.


Your new TV set is now ready to automatically reproduce the best picture quality out of the input signal which is been fed into it. Enjoy your TV watching!!

Version 5/29/2008 32

www.VIZIO.com


3.2

Watching a TV Program

Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector.

1. Press the power button on the remote or on the side of the High Definition TV. The VIZIO logo on the front will change from orange to white.

2. There are 3 options for selecting your programming: a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA input, you can select TV directly by pressing the TV button on the remote, or by pressing the INPUT button on the remote or on the side of the High Definition TV. b. If you are watching broadcasts through a cable or satellite set-top box connected by an

HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by pressing the INPUT button on the remote or on the side of the High Definition TV.

3. c. If you are watching broadcasts through a cable or satellite set-top box connected by a

Component (YPbPr) cable, select Component directly by pressing the COMP button on the remote, or by pressing the INPUT button on the remote or on the side of the High

Definition TV.

Note: You should be able to see a picture. If you do not, make sure that all of the HDTV connections are secure and you have selected the correct video input source.

When using option 2a, press the Channel buttons on the remote or the CH+ / CH- buttons on the side of the High Definition TV to change the channel. Note: The Channel buttons, on the side of the High Definition TV and on the remote control will not work if you are watching a program using HDMI, Component and AV inputs.

Version 5/29/2008 33

www.VIZIO.com


3.3

Adjusting Basic HDTV Settings

Volume

To adjust the volume, press and hold the VOL+ or VOL- button on the side of the PLASMA HDTV or remote control until the desired level is reached.

TV Channels

To step up or down through the available TV channels, press the

CH+ or CH- button on the side of the HDTV or remote control once for the next or previous channel, or hold the button until the desired channel is reached. Note: Channel up and down will only operate in

DTV and TV modes.

Wide

Using this feature, you can watch video content in different size modes on the HDTV.

Press the MENU button on the remote control to bring up the OSD screen.

Press either the or button to select Setup (wrench look alike icon) options.

Press the button scroll down to Wide and select it.

Press either the or button to select among the modes.

Fore more information see Section 4.17.1 – Viewing Modes, on page 62.

Version 5/29/2008 34

www.VIZIO.com


3.4

Program Information

Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner.

Press the GUIDE button again and the following screen will appear showing you the Electronic

Programming Guide.

Press the or button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel. Press the GUIDE button to exit this feature.

3.5

Information on

When you change TV channels or inputs or when the GUIDE key is pressed, an Information Banner is displayed for a few seconds to tell you the status of the PLASMA HDTV.

Program Information:

Provided by Broadcaster

Audio is Stereo TV Channel

Number

Station Name: provided by Broadcaster

Program

Rating

Closed Caption is available

NTSC SDTV (Standard Definition TV) Source is Cable

Version 5/29/2008 35

www.VIZIO.com


Chapter 4 A dvanced Adjustment of HDTV

4.1

Using the On Screen Display (OSD)

The remote control or the control buttons on the right hand side of the High Definition TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the brightness, contrast and other settings. The TV will save changes made to the settings, even if the TV is turned off.

The OSD consists of several menu options: Picture Adjust, Audio Adjust, Setup, TV Tuner Setup and

Parental Controls. The main menu options may very depending on your selected input source.

Note: Some of the main menu options may have additional submenus, i.e. the TV Rating submenu for

Parental Controls.

1.

2.

Press the MENU button on the remote control or the side of the High

Definition TV and the Picture menu will be shown on the screen.

Press the or button on the remote control or the VOL + or VOL – button on the side of the High

Definition TV to select one of the other menu options.

Picture Adjust Audio Adjust TV Tuner Setup Setup Parental Controls

3. Once the menu option is displayed, press the MENU button on the remote control or the CH

+ or CH – button on the side of the High Definition TV to select one of the items to adjust.

4. Press the button on the remote control or the VOL – button on the side of the High

Definition TV to begin adjustment of the item.

Press MENU button when finished. 5.

6. Repeat steps 2 through 5 to adjust additional options within this menu.


Version 5/29/2008 36

www.VIZIO.com


4.2

DTV / TV Input Picture Adjustment

4.2.1

Picture Mode

When the MENU button is pressed, the On Screen

Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Picture Mode selection.

Use the or button to choose from Custom,

Standard, Movie and Game.

If Standard, Movie or Game is chosen for the

Picture Mode, still the Picture adjustments are available for you to set or adjust them to your preferred settings.


Version 5/29/2008 37

www.VIZIO.com


4.2.2

Brightness

Press the button to highlight the Brightness selection.

Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels.

Use the or button to adjust the level.

The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to see the detail in darker parts of the picture and if the brightness is too high the picture will look washed out.


4.2.3

Contrast

Press the button to highlight the Contrast selection.

Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels.


The Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture.


4.2.4

Color

Press the button to highlight the Color selection.

Press the button to start adjusting the color and the menu page will disappear and be replaced by a small Color Indicator Bar so you can see the color level between the minimum and maximum available levels.


The Color adjusts the amount of color in the picture.


Version 5/29/2008 38

www.VIZIO.com


4.2.5

Tint

Press the button to highlight the Tint selection.

Press the button to start adjusting the tint and the menu page will disappear and be replaced by a small Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position.


The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance. In most cases, the default middle position is correct. If people’s faces look too orange try reducing the level of color first as the case of this is often too much color.


4.2.6

Sharp ness

Press the button to highlight the Sharpness selection.

Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels.


The Sharpness adjusts the sharpness of the picture.


Version 5/29/2008 39

www.VIZIO.com


4.2.7

Color Temperature

Press the button to highlight the option for Color Temperature selection.

The default is COOL; this is the 9300K setting.

Press the or button if you want to choose the Normal, Warm or Custom option.

If you choose the Custom option, then a new menu will be displayed showing the primary color items,

Red, Green and Blue. Press the button to highlight the color you wish to adjust.

Press the button to start adjusting the color and the menu page will disappear and be replaced by a small Color (Red, Green or Blue) Indicator Bar as before.

Use the or button to adjust the color.

Repeat the procedure to adjust the other colors if desired.


4.2.8

Ad vanced Video

Press the button to highlight the option for Advanced Video selection.

Press the MENU button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture.

DNR

Press the button to highlight DNR (Dynamic

Noise Reduction). Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture.

Press the or button to choose from the Off,

Low, Medium or Strong setting.


Version 5/29/2008 40

www.VIZIO.com


Black Level Extender

Press the button to highlight Black Level Extender. Use this feature to increase the picture reproduction performance in the dark areas of the picture.

Press the or button to turn this feature On or Off.


White Peak Limiter

Press the button to highlight White Peak Limiter.

Use this feature to limit excessive white in bright areas of the picture, caused by a lower sync level for a channel being received from the antenna or cable.

Press the or button to turn this feature On or

Off.


CTI

Press the button to highlight CTI (Color Transient Improvement). This feature can be used to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors.

Press the or button to choose from the Off, Low, Medium or Strong setting.


Flesh Tone

Press the button to highlight Flesh Tone. In some cases, activation of this feature can result in a more pleasing production of sky and flesh color.

Press the or button to turn this feature On or

Off.


Adaptive Luma

Press the button to highlight Adaptive Luma. Large areas of darkness in a picture will result in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature will raise the APL to counteract this effect.

Press the or button to turn this feature On or Off.


Version 5/29/2008 41

www.VIZIO.com


4.3

DTV / TV Input Audio Adjustment

4.3.1

Volume


Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO

ADJUST page.

Press the button to highlight the Volume selection.

Press the button to start adjusting the volume and the menu page will disappear and be replaced by a small Volume Indicator Bar so you can see the volume level between the zero and maximum available levels.


The Volume Indicator Bar will also appear when watching a program on your TV is the Volume button on the remote or the side of the High Definition TV is pressed.


4.3.2

Bass

Press the button to highlight the Bass selection.

Press the button to start adjusting the bass and the menu page will disappear and be replaced by a small Bass Indicator Bar, as before, so you can see the bass level between the zero and maximum available levels.

Use the or button to adjust for bass boost or attenuation.


Version 5/29/2008 42

www.VIZIO.com


4.3.3

Treble

Press the button to highlight the Treble selection.

Press the button to start adjusting the treble and the menu page will disappear and be replaced by a small Treble Indicator Bar, as before, so you can see the treble level between the zero and maximum available levels.

Use the or button to adjust for treble boost or attenuation.


4.3.4

Balance

Press the button to highlight the Balance selection.

Press the button to start adjusting the balance and the menu page will disappear and be replaced by a small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the nominal position.

Use the or button to adjust the left/right balance.


4.3.5

Surround

Press the button to highlight the Surround selection.

Press the or button to select for the simulated surround sound feature to be On or Off.


4.3.6

Digital Audio Out

Press the button to highlight the Digital Audio Out selection.

Press the or button to make the proper selection. The options being Dolby Digital, PCM and OFF.


Version 5/29/2008 43

www.VIZIO.com


4.3.7

Speakers

Press the button to highlight the Speakers selection.

Press either or button to turn the internal speakers On or Off. You may want to turn-off the internal speakers when listening to the audio through your Home Theatre System.


4.3.8

Lip Sync

Included with the advanced technology of your TV, a feature which will compensate the shortcomings of signal transmission called audio sync (Lip Sync). Lip Sync is designed to adjust the audio of the program being viewed so that it matches the movement of the lips of someone talking on the screen. This feature is built into your set, and it can be applied to all inputs. To use this feature, follow the steps below.

Press the MENU button to bring up the OSD.

Using either the or button scroll across to the microphone icon, the Audio menu will be displayed.

Press either or button to scroll either up or down to Lip Sync.

Press either or button to make the appropriate adjustment.


Version 5/29/2008 44

www.VIZIO.com


4.4

DTV / TV Tuner Setup

When you first use your VIZIO VP422 HDTV10A you will have to setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu.

4.4.1

Tuner Mode


Display (OSD) appears on the PICTURE adjustment page. Press the button to display the TV page.

Press the button to highlight the Tuner Mode selection.

Press either or button to choose Cable or Air

(Antenna) depending upon which equipment you have attached to the DTV / TV Input.

4.4.2

Auto Search

Press the button to highlight the Auto Search selection.

Press the button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels.

4.4.3

Skip Channel

After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel you wish to remove.

Press the MENU and buttons to open the TV TUNER SETUP menu.

Press the button to highlight SKIP CHANNEL.

Press the button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.


Version 5/29/2008 45

www.VIZIO.com


4.4.4

MTS

This feature allows you, the user to select the different languages in which the signal provider or broadcaster is transmitting the audio with the program you are watching. This signal is usually or in most cases Spanish language.

Press the button as many times as it takes to scroll down to this option and get it highlighted.

Press either or button to go through the settings of this feature to make your selection.


4.4.5

Time Zone

Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control.

Press the button to highlight the Time Zone selection.

Press either or button to select your area.


4.4.6

Daylight Saving

As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control.

Press the button to highlight the Daylight Saving selection.

Press either the or button to select On or Off.


Version 5/29/2008 46

www.VIZIO.com


4.5

DTV / TV Input Setup

4.5.1

Language


Display (OSD) appears on the PICTURE adjustment page. Press the button until the

SETUP page is displayed.

Press the button to highlight the Language selection. The default is English.

Press either or button to select Español or

Français.


4.5.2

Sleep Timer

Press the button to highlight the Sleep Timer selection.

Press either or button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes.


4.5.3

Wide

The Wide option is the feature which allows you to select how your display would be size wise. When in TV mode; the selections are Normal, Wide and

Panoramic views.

Press the button as many times as it takes to scroll down to this option and highlight it.

Press either or button to make the correct selection, you will see the screen adjusting to the different sizes which apply to this feature.


Version 5/29/2008 47

www.VIZIO.com


4.5.4

Input Naming

This feature has been added to facilitate you, the user, in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both.

Press button to highlight this option.

Press button to obtain the next screen which shows the different inputs.

Press button to select the desired input which you want to label or name (Examples: VCR, DVD, etc.) it with any name which will make easier for you to recognize it.

Press the MENU key to go to the first space (_) in the bracket.

Press the MENU key to accept the name of the input or the LAST key to cancel the setting.

Press the LAST key when you have finished to go to the previous menu.

Since you may have named an input; it is recommendable to name all the inputs which are being used as well as these for which you have an idea what their name is going to be.


Press either the or button and select either the letter or number belongs to this place.

Press the button to go to the next space (_) and again

Using either the or button to select the next character of the name given to this Input.

Repeat the last previous two steps until the name of the input is completed.

Version 5/29/2008 48

www.VIZIO.com


4.5.5

Closed Caption (CC)

When watching TV, the CC feature is available in the Setup menu.

Press the button to highlight the CC selection.

Press the button to select Off, CC1, CC2, CC3 or CC4 for standard analog (NTSC) TV. Select Off,

CC1, CC2, CC3, CC4, or Service1 through 6 for

Digital (ATSC) TV.


Closed Caption for regular TV is usually CC1 or CC2.

4.5.6

Closed Caption On Mute (CC On Mute)

When selecting Closed Caption as a feature to be used; Closed Caption On Mute will provide you with the option to obtain closed captioning when you press the key labeled mute on your Remote Control.

Press button as many times as it takes to get this option highlighted.

Press either or button to toggle between Off and On to make the correct selection.


Version 5/29/2008 49

www.VIZIO.com


4.5.7

Digital Closed Caption Style (Digital CC Style)

When watching DTV, the Digital CC Style feature is available in the Setup menu.

Press the button to highlight the Digital CC Style selection.

Press the button to go to the next screen.

Press either or button to toggle between the two options: Broadcaster and Custom.

If Custom is selected then you will have the control to customize the way Closed Caption will be displayed by changing these different parameters to your like: Font Size (letters size), Font Color (letters color), Font Opacity (transparency of the letters),

Background Color (color of the background area where Closed Caption is going to be displayed),

Background Opacity (allows to either see through at the scene being played or it could be a solid screen), Window Color (it allows you to change the color to the area where characters will be displayed on) and finally Window Opacity

(allows the area surrounding characters to be changed). There are no recommendations of setting these parameters since you, the user, would have your own taste or like of them.


4.5.8

Reset All Settings

Press the button to highlight the Reset All Settings selection.

Press the button to reset the TV to the default factory settings.

Press either the MENU button to return to the previous menu display or the LAST key to return to your program if task has been completed.

Note: This does NOT reset the Parental Control Password.

4.5.9

Image Cleaner

This feature may allow ghosts of previous images to be removed.

Press the button to highlight the Image Cleaner option.

Press the button to turn this feature On

It usually takes 60 or more minutes for this feature to run a full cycle, and then the TV will turn off automatically without any supervision

Note: Prolonged display of stationary images (such as on a video game or a computer or a still picture) will cause them to remain on the screen. Higher brightness and contrast levels will make the panel more susceptible to image retention. To minimize image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Image Cleaner will not remove images that have been displayed for too long. Image sticking is not covered under standard warranty.

Version 5/29/2008 50

www.VIZIO.com


4.6

DTV / TV Input Parental Control

4.6.1

Channel Block

If you want to restrict certain channel and program viewing, you can do this by turning on the Parental

Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV.

When the MENU button is pressed, the On

Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the PARENTAL page.

The Password must be entered before the TV will continue with Parental settings. The default password set in the factory is 0 0 0 0. If you are going to use the Parental Control feature you should change the password.

Note: Make sure you write down and store the new password in a secure place.

The Reset All Settings feature (see page 50) does NOT reset the password.

Version 5/29/2008 51

www.VIZIO.com


Press the button to highlight the Channel

Block selection.

Press the button to go to the next screen.


4.6.2

TV Rating

Follow the procedure in the previous section 4.6.1 to display the Parental Control menu and then press the button to highlight the TV Rating selection.

Press the button and the Block TV Rating screen will be displayed.

In the Block TV Rating panel you can customize the program blocking of the following TV ratings:

Y – All children

Y7 – Older children

G – General audience

PG – Guidance suggested

14 – Strongly cautioned

MA – Mature audience

You can also customize the TV ratings for the following content:

A – All Sub-ratings

D – Sexual dialog

L – Adult language

S – Sexual situations

V - Violence

FV – Fantasy violence

Press the or button to navigate through the TV rating options. Press the MENU button to block (locked) or allow (unlocked).


Version 5/29/2008 52

www.VIZIO.com


4.6.3

Mov ie Rating

Press the button to highlight the Movie Rating selection.

Press the button and the Block Movie Rating panel will be displayed.

In the Block Movie Rating panel you can customize the program blocking of the following

Movie ratings:

G – General audience

PG – Parental guidance suggested

PG-13 – Recommended for children 13 years of age or older

R – Mature audience

NC-17 – No one under 17 years of age

X – No one under 17 years of age

Press either or button to navigate through the Movie rating options.

Press the MENU button to block (locked) or allow (unlocked).


4.6.4

Check for New DTV Rating

This option is designed to update the TV or Movie table of different ratings for programs being viewed in your local or regional area. It will allow the parental guidance control feature in your TV to have the most current parental control database for a digital signal. This option may be available in the future for activation. This option works as follows: Whenever you decide to use the Parental

Control feature and this option has been activated in your area, the Check for New DTV Rating will be a solid color indicating that an update is available for the TV Rating or Movie Rating table.

After entering the password, the Parental menu will appear on the screen, and then do the following.

Observe the status of the Check for New DTV

Rating. If option is faded out, no update is available (the option is not activated in your area). If it is not faded out, press either or button to select this option.

Press button to execute this operation. Please follow the on screen instructions to complete this procedure.

Press either or button to select and then adjust any other option in this menu.


Version 5/29/2008 53

www.VIZIO.com


4.6.5

Blocked Unrated Programming

Follow the procedure in the previous section 4.6.1 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection.

Press either or button to select YES or NO to block programs that do not have a rating.


4.6.6

Change the Password

Press the button to highlight the Access Code

Edit selection.

Press the button and the new Password panel will be displayed.

Enter the new, 4-digit password using the number buttons on the remote. Enter it a second time to confirm you entered it correctly.


Note: Make sure you write down and store the new password in a secure place.

The Reset All Settings feature (see page 50) does NOT reset the password.

Version 5/29/2008 54

www.VIZIO.com


4.7

HDMI Input Picture Adjustment

The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV or Parental

Control adjustments.

4.8

H DMI Input Audio Adjustment

The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.3. The menu difference is that there is no icon along the top for DTV / TV or Parental


4.9

HDMI Input Setup

The Setup menu operates in the same way for the

HDMI Input as for the DTV/TV input in section 4.5.

The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments.

Version 5/29/2008 55

www.VIZIO.com


4.10

Video Input Picture Adjustment

The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for

DTV / TV adjustments.

4.11

Video Input Audio Adjustment

The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the

DTV / TV input in section 4.3. The menu difference is that there is no icon along the top for


Version 5/29/2008 56

www.VIZIO.com


4.12

Video Input Setup

The Setup menu operates in the same way for

Video Inputs (Component and AV) as for the

DTV/TV input in section 4.5. The menu difference is that there is no icon along the top for TV adjustments.

4.12.1

Auto Phase (for Component input)

Press the button to highlight the H/V Position.

Press the button and the new H/V Position submenu will be displayed.

Press the button to highlight Auto Phase.

Press the button to execute this option. The TV will automatically look for the phase of the signal to fine tune the picture.

Once the adjustments are completed press the

LAST button repeatedly to exit the OSD completely.

4.13

Video Input Parental Control

The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.6. The menu difference is that there is no icon along the top for


Version 5/29/2008 57

www.VIZIO.com


4.14

PC Input Picture Adjustment

The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section

4.2 for Brightness, Contrast, and Color Temperature.

4.14.1

Auto Adjust


Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Auto Adjust selection.

Press the button for the PLASMA HDTV to adjust to the PC signal timing automatically.


4.14.2

Brightness

Press the button to highlight the Brightness selection.

Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels.



The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to see the detail in darker parts of the picture and if the brightness is too high the picture will look washed out.


Version 5/29/2008 58

www.VIZIO.com


4.14.3

Contrast

Press the button to highlight the Contrast selection.

Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels.


The Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture.


4.14.4

Color Temperature

Press the button to highlight the option for

Color Temperature selection.

The default is COOL; this is the 9300K setting.

Press the or button if you want to choose the Normal, Warm or Custom option.

If you choose the Custom option, then a new menu will be displayed showing the primary color items, Red, Green and Blue.

Press the button to highlight the color you wish to adjust.

Press the button to start adjusting the color and the menu page will disappear and be replaced by a small Color (Red, Green or Blue) Indicator Bar as before.

Use the or button to adjust the color.


Version 5/29/2008 59

www.VIZIO.com


4.14.5

H -

Press the button to highlight the H-Size selection.

Press the button to start adjusting the horizontal size of the picture.

Use the or button to adjust the horizontal size.


4.14.6

H. Position

Press the button to highlight the Horizontal

Shift selection.

Press the button to start adjusting the horizontal position of the picture.

Use the or button to adjust the horizontal position.


4.14.7

V. Position

Press the button to highlight the Vertical Shift selection.

Press the button to start adjusting the vertical position of the picture.

Use the or button to adjust the vertical position.


4.14.8

Fine Tune

Press the button to highlight the Fine Tune selection.

Press the button to start tuning the to the PC signal.

Use the or button to adjust the tuning.


Version 5/29/2008 60

www.VIZIO.com


4.15

PC Input Audio Adjustment

The Audio Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.3. The menu difference is that there are no icons along the top for DTV / TV and Parental


4.16

PC Input Setup

The Setup menu operates in the same way for the

PC Input as for the DTV / TV input in section 4.4.

The menu difference is that there is no icon along the top for TV adjustments and no Closed Caption.

Version 5/29/2008 61

www.VIZIO.com


4.17

Understanding Viewing Features

Your HDTV features has the following viewing modes.

4.17.1

Viewing Modes

Normal Mode

The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame. These movies were originally filmed in 16:9

(widescreen), and then modified to fit a traditional TV screen (4:3).

Wide Mode

When watching a standard broadcast or full-frame movie in this mode, the display image is stretched proportionately to fill the TV screen.

When watching a widescreen (1.78:1 source) program or movie, the display image fills the TV screen. If you are watching a widescreen

(1.85:1 or 2.35:1 source) program or movie, there will still be black bars at the top and bottom.

When watching a standard definition 4:3 aspect ratio (1.33:1 source) the picture will fill the screen but will be stretched horizontally; people will look fatter than they are.

Panoramic Mode

When watching a standard broadcast or full frame movie in this mode, the 4:3 Aspect Ratio (1.33:1 source) display image is stretched horizontally on the left and right sides to fill the TV screen. The center of the image is not stretched.

Version 5/29/2008 62

www.VIZIO.com


4.18

Using a Cable or Satellite Remote

Your VIZIO remote uses codes 11758 and 10178 to work your PLASMA HDTV. To use a cable or satellite remote to work the PLASMA HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most

Direct TV units), first try 11758 and then, if that does not work, 10178. If your cable or satellite remote uses a 4-digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote uses a 3digit code (Echostar or Dish Network for example), use code 627.

Note: Some buttons may not function as expected on your cable or satellite remote. Typically power, volume and mute will work.

Chapter 5 Maintenance and Troubleshooting

5.1

Maintenance

1.

2.

Make sure that the power cable is removed from the socket before cleaning the TV.

Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel.

1.

2.

Use a soft cloth for cleaning.

If the housing or remote control is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the display with a dry cloth after cleaning.

1.

2.

Use a soft cotton cloth to gently clean the screen.

The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap the screen to avoid cracking. When the screen is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the display with a dry cloth after cleaning.

Version 5/29/2008 63

www.VIZIO.com


5.2

Troubleshooting Guide

If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-(877) 698-4946 or e-mail us at

[email protected]

.

Problem Solution

No power. Make sure the power button is ON (White VIZIO Logo).

Make sure AC power cord is securely connected to the AC socket.

Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage.

No sound. Check your audio connection

Press MUTE on the remote control, so that mute symbol disappears from the screen

Check your audio settings, your TV audio may be set to SAP, min or speakers off

Press the Volume + (Up) key on your remote control

Make sure that headphones are not connected

Check your input connections. If the screen is black.

Power is ON but no screen image.

Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box,

DVD, etc.

Adjust brightness and contrast.

Check Source settings.

Wrong or abnormal colors appear.

Control buttons do not work.

If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected.

Press only one button at a time.

Remote Control does not work.

Make sure batteries are inserted correctly

Batteries could be weak.

There appears to be image quality issues.

For best image quality, view HD wide screen programs where possible. If

HD content is not available view “Standard Definition” from a digital source.

Standard, analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TV’s and so you can see interference and deficiencies you did not know you had.

You cannot see a picture. Make sure that the power cord is plugged into a grounded electrical outlet.

Make sure that the power button is turned on.

Make sure that the selected input source is connected to a working input source.

If your TV is connected to your computer in RGB or HDMI mode, press any key on your keyboard to “wake” your computer.

You see a distorted picture You may be getting interference from electrical appliances, cars, motorcycles, or fluorescent lights. If you have not mounted it on the wall, try

Version 5/29/2008 64

www.VIZIO.com


Problem or hear unusual sound.

The picture has abnormal patterns.

Solution moving your TV to another location to see if this is the cause of the problem.

Make sure that the input source cable is attached securely and correctly to the back of your TV.

Make sure that the video input source is within the range of your TV.

Compare the video input source’s specifications with your TV specifications.

The display image does not cover the entire screen.

If you are using RGB mode, make sure that H Position and V Position in the

On Screen Display (OSD) are set correctly.

If you are using TV, AV-C, AV-S or Component with 480i input, follow steps on page 34 on how to set the WIDE screen modes.

You can see a picture but you cannot hear sound.

Make sure that the volume is not turned down.

Make sure that the sound is not muted.

Make sure that your audio input source cables are connected securely and correctly.

The TV has pixels that are always dark or colored.

Your PLASMA HDTV is manufactured using an extremely high level of precision technology, however, sometimes some pixels of your PLASMA

HDTV may not display. Pixel defects within industry specifications are inherent to this type of product and do not constitute a defective product.

You see “noise” or “trash” on the screen.

When your PLASMA HDTV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV’s display capabilities. Up-converting can cause noise or trash.

You switch to a different input and the volume changes.

The TV remembers the volume level from the last time you adjusted it. If the sound level is higher or lower from another source, then the loudness will change.

You switch to a different input and the screen size changes.

Tips for High-Definition

Users.

The TV remembers the viewing mode from the last time you used a particular input (AV, Component, HDMI and TV).

The PLASMA HDTV is an ideal platform for viewing High Definition Content.

Best Image Quality will be achieved by the HDMI Input, then YPbPr, then

RGB.

However, due to variances in broadcast practices, it is possible some image distortions can occur.

Tips for Letterbox Content

Users.

Letterboxed (or “Widescreen”) versions of DVD movies are most commonly formatted for standard 4:3 Televisions. The PLASMA HDTV has the capability of expanding this content so the entire screen is filled at the expense of image accuracy. To use this function follow the instructions given in page 34.

Version 5/29/2008 65

www.VIZIO.com


5.3

Telephone & Technical Support

Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone. For more information on warranty service or repair, after the warranty period, please contact our Support Department at the number below.

Customer support and quality service are integral parts of VIZIO’s commitment to service excellence.

For technical assistance contact our VIZIO Technical Support Department via email or phone.

E-mail: [email protected]

Tel: (877) 698-4946 Fax: (949) 585-9563

Hours of operations:

6:00am – 6:00pm PST Monday – Friday

8:00am – 4:00pm PST Saturday – Sunday

Please have your VIZIO model number, serial number and date of purchase available before you call.

39 Tesla, Irvine, CA 92618, USA

Tel: (949) 428-2525 Fax: (949) 585-9514

Web: www.VIZIO.com

Version 5/29/2008 66

www.VIZIO.com


5.4

Compliance

Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area.

USA

Canada

Germany

UK

Japan

UL

CSA

VDE

BASE/BS

Electric Appliance Control Act

5.5

FCC Class B Radio In

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.

2.

3.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. 4.

Notice:

1.

2.

3.

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

Version 5/29/2008 67

www.VIZIO.com


Chapter 6 Miscellaneous Information

6.1

Specifications

Specifications

Panel

Resolution

42” Diagonal, 16:9 Aspect Ratio

1024 x 768 pixels

Pixel (Dot) Pitch 0.900mm (H) x 0.676mm (V)

Display Compatibility HDTV (720P)

Colors

Brightness

Contrast

Viewing Angle

16.77 Million (8-bit)

1500 cd/m

2

(typical)

30000:1 (typical)

Up to 178° (horizontal and vertical)

Inputs

Outputs

Features

1x Co-axial RF (ATSC/QAM/NTSC), 3x HDMI™ (v1.3) with HDCP (plus 1x Stereo Audio

RCA for DVI source), 1x Component YPbPr plus Stereo Audio, 1x RGB PC plus Stereo

Audio, 1x S-Video (AV) plus Stereo Audio, 1x Composite Video (AV)

1x SPDIF Digital Optical Audio, 1 x Analgo Stereo Audio

CC, V-Chip, 3D Comb Filter, Motion Adaptive De-Interlace, 3:2 or 2:2 Reverse Pull-down,

ATSC, with 8VSB & QAM demodulation, with MPEG-2 decoding, NTSC Video decoding via

RF (Antenna, Cable) or Video (CVBS, Component), Progressive Scan Video via Component

YPbPr, VGA or HDMI™, HDTV via HDMI™ or Component YPbPr, Computer 640x480,

800x600, 1024x768, 1360x768 via VGA or HDMI, Color Temperature of 6500K, 5400K and

9300K, Independent Red, Green and blue adjustment for user fine tuning of color temperature, Sound Enhancement, Lip Sync, Input naming and H/V Position. Supports TV signals of 480i (SDTV), 480P (EDTV), 720P (HDTV) and 1080i (HDTV).

Built-in, 10W x 2

60,000 hours to half the original brightness

Speakers

Panel Life

Power

Input

Voltage Range

IEC Connector for direct power line connection

100 ~ 240Vac at 50/60Hz

Power Consumption 400W max, <1W Stand-by.

Environmental Conditions

Operating Temperature: 0°C~35°C, Relative Humidity: 20~80%, Altitude: 0~2,000m

Non-Operating Temperature: -20°C~70°C, Relative Humidity: 5~85%, Altitude: 0~10,000m

Dimensions

Net Weight

Gross Weight

Certifications

40.96” W x 28.02” H x 10.23” D (1040.3mm W x 711.7mm H x 259.8mm D) with stand;

40.96” W x 26.44” H x 3.67” D (1040.3mm W x 671.7mm H x 93.1mm D) without stand

62.83lbs (28.5kg) with stand; 58.42lbs (26.5kg) without stand

74.96lbs (34kg)

CSA/CSA-US, FCC Class B

*Product specifications may change without notice or obligation.

Version 5/29/2008 68

www.VIZIO.com


6.2

Glossary Standard Definitions

Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound.

Aspect Ratio (4:3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height.

For example, a “42 inch TV screen” would be 34 inches wide and 24 inches tall.

Aspect Ratio (16:9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional

TV. For example, a “42 inch TV screen” would be 37 inches wide and 21 inches tall.

Digital TV (DTV): Television delivered and displayed using radio frequency waves that contain information that is digitally encoded for improved quality and efficiency.

Enhanced Definition TV (EDTV): A better digital television transmission than SDTV with at least 480P, in a 16:9 or 4:3 display and Dolby digital surround sound. 480P is the quality used by most DVD players.

EDTV provides 300-400,000 pixels.

HDTV Monitor (sometimes called HDTV Ready): A set that can display HDTV programming if you have a separate HDTV tuner, HD Cable Set-Top Box or HD Satellite Set-Top-Box Receiver.

HDTV Tuner (also decoder, receiver, set-top box): A device capable of receiving and outputting HDTV signals for display. It may be stand-alone or integrated in the set.

High-Definition Television (HDTV): The best quality picture, wide screen (16:9) display with at least 720 progressively scanned lines (720P) or 1080 interlaced lines (1080i) and Dolby digital surround sound.

HDTV provides 900,000-2.1 million pixels.

Integrated HDTV: An HDTV that has the digital tuner built into the set. It does not need a separate settop box to receive over-the-air DTV signals.

Interlace Scan: A way to scan vertical lines onto a TV picture by scanning all the odd lines first, then filling the in the even lines (this happens instantaneously).

Plug-and-Play or Digital Cable Ready: A DTV or other device for digital cable consumers that plugs directly into the cable jack and does not require a separate set-top box. Plug-and-Play TV owners must obtain a Cable CARD from their cable company in order to view scrambled programming services.

Progressive Scan: A way to scan vertical lines onto a TV picture by scanning all the lines consecutively

(progressively).

Standard Definition TV (SDTV): Basic digital television transmission that may be displayed with fewer than 480 progressively scanned lines (480P) in 16:9 or 4:3 format. 480 interlaced (480i) is the quality of today’s analog TV system.

Source: Buying a Digital Television, CEA, HDTV Guide, 2005

Note: The Federal Communications Commission (FCC), the Consumer Electronics Association (CEA) and the Consumer Electronics Retailers Coalition (CERC) have made a new tip sheet available for digital television (DTV) retailers to reproduce and distribute to consumers on the sales floor. The file may be downloaded online at www.dtv.gov

. While you’re there, check out the other useful information in the FCC is making available to consumers interested in learning more about the analog to digital transition.

Version 5/29/2008 69

www.VIZIO.com


6.3

Index

A

Accessories, 5

Adjustments

Selecting the Screen Size, 34, 62, 69

Stepping through TV Channels, 34

Volume, 9, 34, 64

Advanced Video Features

Adaptive Luma, 41

Black Level Extender, 41

CTI (Color Transient Improvement, 41

DNR (Dynamic Noise Reduction, 40

Flesh Tone, 41

White Peak Limiter, 41

C

Cleaning your VIZIO TV, 63

Coax (RF)

Connecting for DTV, 15

Connecting your Basic Set Top Box, 19

Component

Connecting your DVD Player, 22

Connecting your HDTV Set-Top Box, 18

Composite (AV)

Connecting your Basic Set-Top Box, 19


Controls

Front Panel, 9

Side Panel, 9

D

DTV

Audio Adjustment, 42

Parental Control, 51

Picture Adjustment, 37

Special Features, 47

Tuner Setup, 45

DTV Audio Adjust

Balance, 43

Bass, 42

Simulated Surround Sound, 43

Speakers On/Off, 43

Treble, 43

Volume, 42

DTV Picture Adjust

Advanced Video, 40

Brightness, 38, 58

Color, 38

Color Temperature, 40, 59

Contrast, 38, 59

Picture Mode, 37

Sharpness, 39

Tint, 39

DTV Special Features

Closed Caption, 50

Version 5/29/2008

Language, 47

Reset, 50

Sleep Timer, 47

DTV Tuner Setup

Auto Search, 45

Daylight Saving, 46

Skip Channel, 45

Time Zone, 46

Tuner Mode, 45

DVI



G

Glossary, 69

H

HDMI



HDMI Input



Setup, 55

I

Inputs

Antenna, 3

Connectors, 14

Rear Label, 10

Installation

Base removal, 6

Preparation, 5

Safetey Strap, 5

Wall Mounting, 5, 6, 28

O

OSD

Brightness Adjustment, 68

Color Adjustment, 14

Contrast Adjustment, 68

Outputs

Using 5.1 Surround with a Home Theatre System, 25

P

Parental Control

Block Unrated Programming, 54

Channel Block, 51

Movie Rating, 53

Password change, 54

TV Rating, 52

PC Input

70

www.VIZIO.com



Setup, 61

PC Picture Adjust

Auto Adjust, 58

Fine Tune, 60

Horizontal Position, 60

Horizontal Size, 60

Vertical Position, 60

PC Resolutions, 27

PIP and POP Inputs, 62

R

Remote

Batteries, 13

Layout, 12, 13

Range, 13

Remote Control

Using your Cable or Satellite Remote to Operate your

VIZIO TV, 63

RGB

Connecting your PC, 26

S

Screen Size explanation, 62

S-Video


Connecting your VCR, 24

Connecting your Video Camera, 24

T

Technical Specifications, 68, 69

Troubleshooting Guide, 64

TV




Special Features, 47

TV Audio Adjust

Balance, 43


Bass, 42

Simulated Surround Sound, 43

Speakers On/Off, 43

Treble, 43

Volume, 42

TV Picture Adjust

Advanced Video, 40

Brightness, 38, 58

Color, 38

Color Temperature, 40, 59

Contrast, 38, 59

Picture Mode, 37

Sharpness, 39

Tint, 39

TV Special Features

Closed Caption, 49

Language, 47

Reset, 50

Sleep Timer, 47

TV Tuner Setup, 45

Auto Search, 45

Skip Channel, 45

Tuner Mode, 45

V

Video Input


Auto Phase, 57



Setup, 57

W

Watching TV

Basic Adjustments, 34

Basic connections, 28

First Startup, 28

Getting your Programs, 33

Program Information, 35

Status Information, 35

Version 5/29/2008 71

www.VIZIO.com

Vizio VP42HDTV20A User manual

[email protected]

www.VIZIO.com

www.VIZIO.com

Note:

Note

DNR

Black Level Extender

White Peak Limiter

CTI

Flesh Tone

Adaptive Luma

[email protected]

Related manuals

Table of contents

Vizio VP42HDTV20A User manual

[email protected]

www.VIZIO.com

www.VIZIO.com

Note:

Note

DNR

Black Level Extender

White Peak Limiter

CTI

Flesh Tone

Adaptive Luma

[email protected]

Related manuals

Vizio

VP422

AOC

L47H861

Vizio

Computer Monitor VA220E

AOC

ENVISION Series

AOC

Flat Panel Television L22W861

AOC

Flat Panel Television L19W861

AOC

ENVISION Series

AOC

L42H861

AOC

L22W831

RCA

J42LE840

Vizio

VA22LF - 22" LCD TV

Table of contents