PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
13
0.
c
om
.u
a
Owner’s manual & Installation manual
Mode d’emploi et manuel d’installation
Manual de instrucciones y de instalación
CD/USB/MP3/WMA RECEIVER
LECTEUR CD/USB/MP3/WMA
RECEPTOR CD/USB/MP3/WMA
Autogood products Internet store “130”
English
Français
13
0.
c
om
.u
a
English
2
Autogood products Internet store “130”
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
Français
13
0.
c
om
.u
a
Español
1. FEATURES......................................................................................................................... 4
Expanding Systems............................................................................................................ 4
2. PRECAUTIONS.................................................................................................................. 5
Front Panel . ...................................................................................................................... 6
About the Registered Marks, etc........................................................................................ 6
USB Port............................................................................................................................ 6
Remove the DCP............................................................................................................... 7
Re-attach the DCP............................................................................................................. 7
3. CONTROLS........................................................................................................................ 8
Operational Panel............................................................................................................... 8
Names of Buttons............................................................................................................... 8
Remote Control ................................................................................................................. 9
Using the Remote Control.................................................................................................. 9
4. CAUTIONS ON HANDLING............................................................................................. 10
Handling Discs................................................................................................................. 10
5. OPERATIONS................................................................................................................... 11
Basic Operations.............................................................................................................. 11
Radio Operations............................................................................................................. 12
CD/MP3/WMA Operations............................................................................................... 13
USB Operations............................................................................................................... 15
iPod & iPhone Operations................................................................................................ 15
AUX Operations............................................................................................................... 16
Audio Setup...................................................................................................................... 17
System Setup................................................................................................................... 17
6. TROUBLE SHOOTING..................................................................................................... 18
7. ERROR DISPLAY............................................................................................................. 19
8. SPECIFICATIONS............................................................................................................ 20
9. INSTALLATION / WIRE CONNECTION GUIDE.............................................................. 21
English
Contents
Autogood products Internet store “130”
3
English
1. FEATURES
Français
Compatible with iPod®/iPhone™ via USB
4ch/2V RCA Output with Subwoofer Control and BEAT-EQ with 3 Band Parametric
Equalizer
Detachable Front Panel with 3.5 mm Auxiliary Input
MP3/WMA compatible with ID3-TAG display
om
.u
a
English
Expanding Systems
13
0.
c
Expanding audio features
4-channel amplifier
USB memory
iPod/
iPhone
Note:
Items outside of the frames are commercially
available.
4
Portable player
(Connect by AUX IN jack)
Autogood products Internet store “130”
English
2. PRECAUTIONS
WARNING
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
URF
CHINA
PN:127070005980
om
3. This unit uses a precision mechanism.
Even in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
87.9-107.9MHz
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
.u
a
2. Vibrations resulting from driving on bumpy
roads may cause the sound to skip.
530-1710kHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Español
1. When the inside of the car is very cold and
the player is used soon after switching
on the heater, moisture may form on the
disc or the optical parts of the player and
proper playback may not be possible.
If moisture forms on the disc, wipe it off
with a soft cloth. If moisture forms on
the optical parts of the player, do not
use the player for about one hour. The
condensation will disappear naturally
allowing normal operation.
Français
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
13
0.
c
4.This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy, and
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to consult the dealer or an
experienced radio/TV technician for help.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO
THIS PRODUCT NOTAPPROVED BY
THE MANUFACTURER WILL VOID THE
WARRANTY AND WILL VIOLATE FCC
APPROVAL.
Autogood products Internet store “130”
5
Français
English
For a longer service life, be sure to read the
following cautions.
• Do not allow any liquids on the set. Doing
so may damage the internal circuitry.
• Do not disassemble or modify the set in
any way. Doing so may result in damage.
• Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
• If a problem should occur, have the set
inspected at your store of purchase.
• The remote control unit may not work if
the remote control sensor is exposed to
direct sunlight.
Cleaning the body
USB Port
•When a USB memory stick is used, it
may stick out presenting the possibility
of injury. Use a USB extension cable to
prevent this hazard.
•The USB memory sticks must be
recognized as “USB mass storage class”
to work properly. Some models may not
operate correctly.
Clarion will not be held liable in the
unlikely event of loss of or damage to
memorized data.
When using an USB memory stick, we
recommend that you backup your data on
a personal computer.
•Data files may be lost or become
corrupted when using USB memory sticks
in the following situations: When the USB
memory stick is disconnected or the power
is turned off during data read or write.
When affected by static electricity or
electric noise.
When the USB memory stick is connected
or disconnected while the contents are
being accessed.
•Some USB memory sticks cannot be
inserted to the main unit because of their
shape. In such cases, use a commercial
USB extension cable to connect them.
•Connection to a computer is not
supported.
•Music files (MP3, WMA, etc.) stored in the
USB memory stick cannot be played back.
13
0.
c
om
Use a soft, dry cloth and gently wipe off
the dirt.
For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
its subsidiaries.
All other marks, channel names and
logos are the property of their respective
owners.
.u
a
English
Front Panel
About the Registered Marks,
etc.
• “Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been
certified by the developer to meet Apple
performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifically to iPhone and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
• ©2009 SIRIUS XM Radio Inc., SIRIUS,
XM and all related marks and logos are
trademarks of SIRIUS XM Radio Inc. and
6
Autogood products Internet store “130”
English
Remove the DCP
Français
The control panel can be detached to prevent
theft. When detached, keep it in a safe place
where it will not be subject to scratches.
We recommend taking the DCP with you
when leaving the car.
1.Press the [ ] button (2 sec.) to turn off
the power.
2.Depress the [OPEN] button to unlock the
DCP.
3.Grab the edge that pops out and remove
the DCP.
Español
13
0.
c
om
1.Hold the DCP and ensure that the panel
faces towards you. Set the right side of
the DCP into the DCP bracket.
2 Press the left side of the DCP until it locks.
.u
a
Re-attach the DCP
CAUTION
•The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or
subject it to strong shocks.
•Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DCP
to fall.
•The connector connecting the source unit and the DCP is an extremely important part. Be
careful not to damage it by pressing on it with fingernails, screwdrivers, or other hard objects.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
Autogood products Internet store “130”
7
English
3. CONTROLS
Operational Panel
[BAND] [MENU]
[
Disc slot
]
Français
English
TA
[
,
]
[PS/AS] [SOUND]
[TA]
[1~6]
13
0.
c
[BAND] button
•Select tuner band
[MENU] button
•System menu
[ ] button
•Eject the disc in the unit.
[
,
] button
•Previous (Next)/Search
[OPEN] button
•Unlock the front panel.
[PS / AS] button
• Preset scan/Auto memory store
[SOUND] button
•Sound effect setting
8
[VOLUME] knob
•Adjust volume level/Confirm
om
Names of Buttons
[ / SRC] button
• Power/Toggle the audio source
AUX jack
[ADJ]
.u
a
[OPEN] [POWER/SRC] [VOLUME]
[ISR] button
•Recall ISR station stored in memory and
store current station in ISR memory (long
press)
[1–6] button
• [1] button: Scan play/Preset station 1.
•[2] button: Repeat play/Preset station 2.
•[3] button: Random play/Preset station 3.
•[4] button: Play/Pause/Top play (long
press)/Preset station 4.
•[5] button: Previous folder/Preset station
5.
10 tracks down (long press)
•[6] button: Next folder/Preset station 6.
10 tracks up (long press)
[ADJ] button
• Display switch/System menu
Autogood products Internet store “130”
English
Remote Control
[RPT] button
• Repeat play
[POWER/SRC] button
•Toggle the audio source/Power on/
Power off (long press)
[SCN/PS/AS] button
•Scan play/Preset scan/Auto
memory store
[POWER/
SRC]
[
,
POWER
DISC UP
TOP
[BND/TOP]
.u
a
VOLUME
SEARCH
[MUTE]
[
] button
•Play/Pause
[SCN/
PS/AS]
,
]
[
]
MUTE
ISR
DISP
SCN
RPT
RDM
PS/AS
TV/VTR
[ISR]
[DISP]
[RDM]
[RPT]
13
0.
c
om
[ISR] button
•Recall ISR station stored in
memory and store current station in
ISR memory (long press)
[
]
[
,
] button
•Volume up/down
[DISP] button
•Display switch
BND
Español
[BND/TOP] button
•Select tuner band/Top play (long
press)
SRC
Français
,
] button
[
•Preset station up/down/Previous/
next track/Search (long press)
[RDM] button
•Random play
Using the Remote Control
1.Aim the remote control at the remote sensor
on the unit.
2.Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3.DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4.Use button shaped lithium battery CR2025
(3 V) only.
5.DO NOT recharge, disassemble, heat or
expose the battery to fire.
6.Insert the battery in proper direction
according to the (+) and (-) poles.
7.Store the battery in a place where children
cannot reach to avoid the risk of accident.
Inserting the battery
1.Slide remote control unit’s rear cover in
the direction shown.
2.Insert battery (CR2025) into insertion
guides with printed side (+) up.
3.Press battery into compartment as shown.
4.Replace and slide cover until it clicks into
place.
Autogood products Internet store “130”
Insertion guide
9
Handling Discs
Français
English
Handling
Storage
• New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a pen or similar tool to remove
any roughness from the edge of the disc.
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Pen
Roughness
Cleaning
13
0.
c
om
• Never stick labels on the surface of the
disc or mark the surface with a pencil or
pen.
• Never play a disc with any cellophane
tape or other glue on it or with peeling off
marks. If you try to play such a disc, you
may not be able to get it back out of the
player or it may damage the player.
• Do not use discs that have large
scratches, are misshapen, cracked,
etc. Use of such discs may cause
misoperation or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
• To remove fingermarks and dust, use a
soft cloth and wipe in a straight line from
the center of the disc to the outer edge.
• Do not use any solvents, such as
commercially available cleaners, antistatic spray, or thinner to clean discs.
• After using special disc cleaner, let the
disc dry off well before playing it.
.u
a
English
4. CAUTIONS ON HANDLING
10
On discs
• Exercise a good precaution when loading
a disc. The operation panel will close
automatically when leaving it open for a
while.
• Never turn off the power and remove the
unit from the car with a disc loaded.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
Autogood products Internet store “130”
English
5. OPERATIONS
Basic Operations
Be sure to read this chapter referring to the
chapter “3. CONTROLS.”
CAUTION
Volume adjustment
Turn the [VOLUME] knob on the front panel
or press the [ , ] button on the remote
control.
The adjustable range of volume is 0 to 40.
While driving, keep the volume level at
which external sounds can be heard.
Power on/off
Playing source selection
Press the [SRC] button on the front panel
or the remote control repeatedly to choose
desired playing source.
Notes:
1. Playing source selection means selecting
work mode, such as DISC mode, Radio
mode, Aux mode, etc.
2. When some devices are not ready, they
cannot be selected.
om
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the car’s battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
1. Start the engine. The power button will
light up.
.u
a
Notes:
CAUTION
Español
Before turning off the unit, return the
volume to a lower level. Restarting
playback with the volume at maximum
increases the possibility of damage to the
speakers or your hearing.
Français
Note:
13
0.
c
Engine ON position
2. Press the [ ] button on the front panel
to turn on the power under standby mode.
The unit goes back to the last status after
power on.
3. Press and hold the [ ] button on the front
panel to turn off the power under work
mode.
Display system time
Press the [ADJ] button on the front panel or
[DISP] button on the remote control to switch
the display information, system time and
playing source.
Mute
Press the [MUTE] button on the remote
control to mute the volume from the unit.
Note:
Pressing the [MUTE] button again or
adjusting volume will release muting.
Autogood products Internet store “130”
11
Radio Operations
Press the [SRC] button once or more to enter
radio mode.
Français
Select one radio band
Press the [BAND] button on the panel or
[BND] button on the remote control to select
one radio band among FM1, FM2, FM3, AM.
English
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
]/[
] button on the front
panel or the remote control to tune in a
higher/lower station.
Auto tuning
13
0.
c
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] (2 sec.) to start
automatic station search.
To stop auto store, press other keys having
radio functions.
Notes:
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is on, only those
radio stations with strong radio signal can be
received.
Press and hold the [ADJ] button on the front
panel, then press [
] button repeatedly
until LO or DX displays on the screen, and
rotate the knob to select Local or Distant
mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
om
Press and hold the [
]/[
] button on
the front panel or the remote control to seek
a higher/lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
Recall the stored stations
.u
a
English
Select tuner as playing source
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has four bands: FM1, FM2,
FM3 and AM. FM3 and AM can store by
AS function. Each bands can store six
stations, CZ200 can store 24 stations in
total.
1. Press the [PS/AS] button.
2.When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Note:
Be careful not to press and hold the [PS/AS]
button for two seconds or longer, otherwise
the auto store function is engaged and the
unit starts storing stations.
Manual store
While tuned into a desired radio station,
press and hold number button 1–6 to store it
in the memory.
12
Autogood products Internet store “130”
Note:
Precautions when creating MP3/
WMA file
Number of files or folders
1.Up to 999 files can be recognized per
folder.
Up to 3000 files can be played.
2.Tracks are played in the order that they
were recorded onto a disc. (Tracks
might not always be played in the order
displayed on the PC.)
3.Some noise may occur depending on
the type of encoder software used while
recording.
om
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps/VBR
2. WMA: Bit rate 8 kbps-320 kbps
Folder structure
A disc with a folder having more than eight
hierarchical levels cannot be used.
13
0.
c
File extensions
1.Always add a file extension “.MP3”,
“.WMA” to MP3, WMA file by using single
byte letters. If you add a file extension
other than specified or forget to add the
file extension, the file cannot be played.
2.Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR files are played, the play time
on the display may differ from the actual
play location.
* When MP3/WMA files are played, there
is silence between tunes.
Logical format (File system)
1.When writing MP3/WMA files on a CD-R
disc or CD-RW disc, please select ISO
9660 level 1 or 2, Joliet, Romeo or Apple
ISO as the writing software format. Normal
play may not be possible if the disc is
recorded in another format.
Español
To disable DRM (Digital Rights
Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy Music tab,
then under Rip settings, uncheck the Copy
Protect Music box. Then recreate the files.
When you disable DRM, you do so at your
own responsibility.
Français
If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no
audio is output (The WMA indicator blinks).
2.The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
3.Do not affix a name to a file inside a folder
having the same name.
.u
a
This unit can play back MP3/
WMA files
English
CD/MP3/WMA Operations
Eject function
Just pressing the [
disc.
] button, ejects the
Notes:
•Forcing a CD into the disc slot before auto
reloading can damage the CD.
•If a CD (12 cm) is left in the ejected
position for 15 seconds, the CD is
automatically reloaded (Auto reload).
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert a CD into the center of the disc slot
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
•Never insert foreign objects into the disc
slot.
Autogood products Internet store “130”
13
•If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
•Discs not bearing the
or
mark
and CD-ROMs cannot be played by this
unit.
•Some CDs recorded in CD-R/CD-RW
mode may not be usable.
TEXT
TEXT
Français
English
Pausing play
1. Press the [ 4 /
] button to pause play.
“PAUSE” appears in the display.
2.To resume CD play, press the [ 4 /
]
button again.
Displaying CD titles
Fast-forward
Press and hold the [
] button.
Fast-reverse
Press and hold the [
] button.
* For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, the playing time may
have a margin of error.
Folder select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2.To select a track, press the [
] or [
]
button.
om
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, press the [DISP]
button to change the title display.
Fast-forward/Fast-reverse
.u
a
English
CD/MP3/WMA Operations
Notes:
13
0.
c
MP3/WMA disc
FILE --> FOLDER --> TITLE/ALBUM -->
ARTIST --> FILE -->
•If MP3/WMA disc is not input TAG,
“NO TITLE” appears in the display.
•Only ASCII characters can be displayed in
Tags.
Selecting a track
Track-up
1.Press the [
] button to move ahead to
the beginning of the next track.
2.Each time you press the [
] button, the
track advances ahead to the beginning of
the next track.
3.For MP3/WMA disc, press and hold the [6]
button to move ahead 10 tracks.
Track-down
1.Press the [
] button to move back to
the beginning of the current track.
2.Press the [
] button twice to move back
to the beginning of the previous track.
3.For MP3/WMA disc, press and hold the [5]
button to move back 10 tracks.
14
Top function
The top function resets the CD player to the
first track of the disc. Press and hold the
[TOP] button (2 sec.) to play the first track
(track No. 1) on the disc.
* In case of MP3/WMA, the first track of a
folder being played will be returned.
Other various play functions
Scan play
This function allows you to locate and play
the first 10 seconds of all the tracks recorded
on a disc.
Press the [SCN] button to perform scan play.
Repeat play
This function allows you to repeat playback
of a track.
CD:
1.Press the [RPT] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2.Press the [RPT] button again to cancel
repeat playback, “RPT OFF” appears on
the LCD.
MP3/WMA:
1.Press the [RPT] button to perform repeat
play, “TRACK RPT” appears on the
display, and “RPT” lights.
Autogood products Internet store “130”
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [RDM] button to perform random
play.
Random play starts with the next played
track when Random function is on.
Français
2.For MP3/WMA files, press the [RPT]
button again, “FOLDER RPT” appears on
the display for folder repeat play.
3. Press [RPT] button twice to cancel repeat
playback, “RPT OFF” appears on the
display, and “RPT” goes off.
English
CD/MP3/WMA Operations
Español
om
1.Insert a USB device into the USB
connector.
When connecting a USB device, the unit
will read the files automatically.
2.To remove the USB device, you should
first select another source, in order to
avoid damaging the USB device. Then
remove the USB device.
.u
a
USB Operations
Connect
13
0.
c
iPod & iPhone Operations
Connect an iPod or iPhone to the USB using
a USB cable.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback starts.
MENU
Press the [MENU] button repeatedly to show
PLAY LISTS, rotate the knob to show PLAY
LISTS / ARTISTS / ALBUMS / GENRES /
SONGS / COMPOSERS, press and rotate
the knob to select a desired option, then
press the knob to confirm.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your
iPod/iPhone repeatedly.
1.Press the [RPT] button once or more until
“TRACK RPT” appears on the LCD to
perform repeat play.
2.Press the [RPT] button repeatedly until
“ALL RPT” appears on the LCD for all
tracks repeat play.
3.Press the [RPT] button repeatedly until
“RPT OFF” appears on the LCD to cancel
repeat playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1.Press the [RDM] button once or more
until “SONG RDM” appears on the LCD to
perform random play.
2.Press the [RDM] button repeatedly until
“ALBUM RDM” appears on the LCD for
album random play.
3.Press the [RDM] button repeatedly until
“RDM OFF” appears on the LCD to cancel
random playback.
Autogood products Internet store “130”
15
English
AUX Operations
Press the [SRC] button on the panel or remote control to select AUX.
AUX is just for Audio content with 3.5 mm Jack connector plugged into audio-in socket on the
front panel.
Français
AUX input sensitivity setting
1. Press the [ADJ] button.
2. Turn the [VOL/SEL] knob to select “AUX MID”.
3.If the output level of connected external audio player is “High”, rotate [VOL/SEL] knob and
choose “AUX LOW”. And if the output level is “Low”, choose “AUX HIGH”.
13
0.
c
om
.u
a
English
16
Autogood products Internet store “130”
Audio Setup
REAR/S-W
Rotate the knob to choose REAR LINE OUT
or SUB-WOOFER.
om
CLOCK
Press the knob to enter clock setting mode,
Rotate the knob to set clock, press [ ] or
[ ] to select hour or minute, press and hold
the knob to confirm.
DIMMER: ON/OFF
Rotate the knob to choose dimmer on or off.
ON: The LCD is dimmed when the interior
light is on.
OFF: The LCD stays at maximum brightness.
.u
a
In the radio mode, press and hold the [ADJ]
button to enter system MENU. Press [
,
] to select options, rotate the [VOLUME]
knob to adjust.
Español
System Setup
Français
Press the [SOUND] button, then press
,
] to select USER preset including:
[
BALANCE -> FADER -> M-B EX -> LPF(low
pass filter) -> SUBW VOL, rotate the
[VOLUME] knob to select a value.
BALANCE: LEFT 1-7 -> CENTER -> RIGHT
1-7
FADER: LEFT 1-7 -> CENTER -> RIGHT 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6)-(+6)
English
Press the [SOUND] button to enter sound
effect setting mode. First press shows
current EQ. Rotate the [VOLUME] knob to
change the options in the following order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
13
0.
c
DX/LO
In the radio mode, rotate the knob to choose
radio local or distant.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals
can be received.
AUX SENS
Rotate the knob to choose AUX Input
sensitivity LOW, MID or HIGH at AUX mode.
SCRN SVR: ON/OFF
Rotate the knob to choose screen saver on
or off.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK
-> FOLDER -> FILE -> ALBUM -> TITLE
-> ARTIST -> TRACK ->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by pressing the [DISP]
button.
TEL-SW
Rotate the knob to choose TELE-PHONE
MUTE, ON or OFF.
OFF: This unit continues normal operation
even when the cellular phone is used.
ON: You can listen to your telephone calls
from the speakers connected to this unit.
* When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
MUTE: The sound from this unit is muted
during telephone calls.
BEEP: ON/OFF
Rotate the knob to choose button beep
sound on or off.
12/24H
Rotate the knob to choose time format: 12 or
24 hour.
Autogood products Internet store “130”
17
General
Problem
Cause
Français
Unit does not turn
on.
English
Unit does not turn
on.
Nothing happens
when buttons are
pressed.
Unit fuse blown.
Install new fuse with correct rating.
Car battery fuse blown.
Install new fuse with correct rating.
Turn off the power and open the operation panel.
Press the Reset button with a thin rod.
Note:
When the Reset button is pressed, turn off the ACC
power.*
Illegal operation.
Display is not
accurate.
*When the Reset button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
Remote control
does not work.
Battery depleted.
Change the battery.
Battery installed incorrectly.
Improper audio output connection.
Speakers damaged.
Check wiring and correct.
Increase volume level.
Replace speakers.
Heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of car.
Insulate all speaker wiring connections.
Non-standard disc used.
Use a standard disc.
13
0.
c
No/low audio
output.
Install the battery correctly.
om
Volume set too low.
Speaker power rating does not
Poor sound quality match unit.
or distortion.
Wrong connections.
Tel-Mute
malfunction.
Measure
.u
a
English
6. TROUBLE SHOOTING
Replace speakers.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
MUTE wire is grounded.
Check the ‘MUTE’ wiring and correct.
Unit resets itself
Incorrect connection between ACC
Check wiring and correct.
when engine is off. and Battery.
DISC player
Problem
Cause
Another disc is already loaded.
There is a foreign object already in
place.
Compact disc is dirty.
Sound skips or is
Compact disc is heavily scratched or
noisy.
warped.
Sound is bad directly Water droplets may form on the
after power is turned internal lens when the car is parked in
on.
a humid place.
Disc cannot be
loaded.
18
Measure
Eject the disc before loading the new one.
Eject the foreign object forcibly.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about one hour with the power on.
Autogood products Internet store “130”
USB devices
USB device cannot
be inserted.
Measure
Reversing the connection direction of the USB
device, try it again.
The USB connector is broken.
Replace with a new USB device.
The USB device is damaged.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Connectors are loose.
Store these files properly in the USB device.
Sound skips or is
noisy.
Use MP3/WMA files encoded properly.
om
7. ERROR DISPLAY
.u
a
MP3/WMA files are not encoded
properly.
Español
No sound heard with
No MP3/WMA file is stored in the
the display “No File”
USB device.
shown.
Français
USB device is not
recognized.
Cause
The USB device has been
inserted with wrong direction.
English
Problem
Display
ERROR 3
ERROR 5
13
0.
c
If an error occurs, one of the following errors is displayed.
Take the measures described below to solve the problem.
Cause
Measure
Disc is inserted incorrectly.
Eject the disc then reload it properly.
The disc format is not supported.
Try another disc.
This is a failure of deck’s mechanism.
Consult your store of purchase.
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
*When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
Autogood products Internet store “130”
19
Power supply voltage:
14.4 VDC (10.8 to 15.6 V allowable), negative
ground
Pre-Amp output voltage:
2.0 V (CD play mode: 1 kHz, 0 dB, 10 kΩ load)
Fuse: 15 A
Dimensions of the main unit (W × H × D):
7 2/5 × 2 7/25 × 7 12/25 in.
(188 × 58 × 190 mm)
Weight of the main unit: 2.98 lb. (1.35 kg)
Dimensions of the remote control unit (W × H × D):
1 2/3 × 2/5 × 4 2/5 in.
(43 × 11 × 113 mm)
Weight of the remote control unit:
1.16 oz. (36 g) (including battery)
English
Frequency range: 530–1,710 kHz
Usable sensitivity (S/N=20 dB): 30 dBμ
CD
System: Disc digital audio system
Frequency response: 20 Hz–20 kHz
Signal/noise ratio: >75 dB
Total harmonic distortion: Less than 0.1% (1 kHz)
Channel separation: >60 dB
om
MP3/WMA mode
USB
13
0.
c
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO 9660 level 1,2
Joliet or Romeo file system
Specification: USB 1.0/2.0
Playable audio format:
MP3 (.mp3): MPEG 1/2/Audio Layer-3
WMA (.wma): Ver 7/8/9.1/9.2
Audio amplifier
Maximum power output:
180 W (45 W × 4)
Speaker impedance: 4 Ω (4 to 8 Ω allowable)
7” (178 mm)
6 2/3” (170 mm)
7 2/5” (188 mm)
Notes:
2”
(50 mm)
1 4/5” (46 mm)
2 7/25” (58 mm)
•Specifications comply with JEITA Standards.
•Specifications and design are subject to change
without notice for further improvement.
Power output:
18 W × 4 Channels RMS (4 Ω at
14.4 V≤1% THD+N)
Signal to noise ratio:
76 dBA (reference: 1 W into 4 Ω)
Input
Audio input sensitivity:
High: 320 mV (at 1 V output)
Mid: 650 mV (at 1 V output)
Low: 1.3 V (at 1 V output)
(input impedance 10 kΩ or greater)
Aux-in level: ≤2 V
20
1/2” (12 mm)
AM tuner
6 2/5” (163 mm)
General
Frequency range: 87.9–107.9 MHz
Usable sensitivity: 8 dBμ
Frequency response: 30 Hz–15 kHz
Stereo separation: 30 dB (1 kHz)
Signal/noise ratio: >55 dB
.u
a
Français
FM tuner
7 12/25” (190 mm)
English
8. SPECIFICATIONS
Autogood products Internet store “130”
English
9. INSTALLATION / WIRE
CONNECTION GUIDE
CONTENTS
.u
a
Español
1) Before Starting
Français
1) Before Starting....................................................................... 21
2) Package Contents.................................................................. 21
3) General Cautions................................................................... 21
4) Cautions on Installation.......................................................... 22
5) Installing the Source Unit....................................................... 22
6) Removing the Source Unit..................................................... 24
7) Wiring and Connections......................................................... 25
8) Connecting the Accessories................................................... 26
13
0.
c
om
1.This set is exclusively for use in cars with a
negative ground 12 V power supply.
2.Read these instructions carefully.
3.Be sure to disconnect the battery terminal
before starting. This is to prevent short circuits
during installation. (Figure 1)
2) Package Contents
Source unit........................................... 1
Front panel........................................... 1
Trim ring............................................... 1
Mounting bracket.................................. 1
Screws M5×6 mm................................. 4
Car battery
Figure 1
L-key..................................................... 2
Wire connector..................................... 1
Remote control unit (with battery)........ 1
Owner’s manual................................... 1
Warranty card....................................... 1
3) General Cautions
1.Do not open the case. There are no
user- serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
2.Use a soft, dry cloth to clean the
case. Never use a rough cloth,
thinner, benzine, or alcohol. For
tough dirt, apply a little cold or warm
water to a soft cloth and wipe off the
dirt gently.
Autogood products Internet store “130”
21
4) Cautions on Installation
English
Français
1.Prepare all articles necessary for
installing the source unit before
starting.
2.Install the unit within 30° of horizontal.
(Figure 2)
3.If you have to do any work on the car
body, such as drilling holes, consult
your car dealer beforehand.
4.Use the enclosed screws for
installation. Using other screws can
cause damage. (Figure 3)
Chassis
Chassis
Damage
Max 30°
Figure 3
.u
a
English
Max. 6 mm (M5 screw)
Figure 2
5) Installing the Source Unit
13
0.
c
om
1.Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the universal mounting bracket inward, then secure the stopper.
2.Insert the source unit into the mounting bracket until it locks.
3.Carefully adjust all mounting tabs on the mounting bracket and confirm that the
mounting tabs are securely attached.
Notes:
1.Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2.Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
7 3/16”
22
2 1/8”
Hole
(53 mm)
(182 mm)
Autogood products Internet store “130”
Notes on installation
Unit installation
English
7. DO NOT block the cooling fan exit to
ensure sufficient heating dissipation of this
unit, or it may result in damage to this unit.
1. Before installation, please make sure that
all connections have been properly made
and the unit operates normally. Improper
connection may result in damage to the
unit.
2. Use only accessories designed and
manufactured for this unit. The use of
other unauthorized accessories may result
in damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit where it will be
exposed to heat to prevent damage to
electrical components such as the laser
head.
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in degraded performance.
6. To prevent electric spark, connect the
positive pole first and then the negative
pole.
Method A
Français
1. Insert mounting bracket into dash
board, choose appropriate mounting tab
according to the gap width, bending the
mounting tab outwards with a screwdriver
to fix the mounting bracket in place.
2. Slide the unit into the bracket until you
hear a click sound.
.u
a
Español
Screwdriver
13
0.
c
om
Dashboard
Mounting bracket
Autogood products Internet store “130”
23
6) Removing the Source Unit
Method B
English
Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
Français
M5×6
Dashboard
13
0.
c
Trim ring installation
Disassemble the unit
1. Switch off the power.
2. Remove the panel.
3. Remove the trim ring.
4. Insert the removal keys straight back until
they lock, then pull the unit out.
om
1. Insert this unit directly to the opening of
the dashboard.
2. Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
.u
a
English
2. Push the trim ring to left and pull out the
left part.
Mounting frame
Attach the trim ring around the front panel.
5. Disconnect all the wires.
24
Autogood products Internet store “130”
7) Wiring and Connections
English
Black
White
Red
Rear Right /
SUB OUT 2
Rear audio output (Right)
Subwoofer output 2
White
USB connector
Red
Front audio
output terminal
Black
.u
a
SWC
Steering wheel Black
control terminal
Gray
Left
Right
Español
Black
Français
Rear Left /
SUB OUT 1
Black
Rear audio output (Left)
Subwoofer output 1
13
0.
c
om
4-channel amplifier
(Black)
ANTENNA
Refer to the next page.
Autogood products Internet store “130”
25
English
16-pin connector extension lead
(attached to the source unit)
Gray
Front right
Brown wire (Phone mute lead)
Gray/Black
Français
Connect to cellular phone mute lead.
White
Front left
White/Black
Yellow wire (Memory back-up lead)
Connect directly to battery
Purple
Front right
Purple/Black
English
Green
Front left
Red wire (Power lead)
Accessory ⊕ 12 V
Green/Black
4-speaker system
.u
a
Blue/White wire (Amplifier turn-on lead)
or
Connect to remote turn-on lead of amplifier
2-speaker system
Front right
Gray/Black
White
Connect to vehicle chassis ground
Orange/White wire (Illumination lead)
Connect it to the car power supply terminal for
illumination
13
0.
c
Front left
om
Black wire (Ground lead)
Gray
White/Black
Purple
Purple/Black
Green
Not used.
Insulate each wire
Blue wire (Auto antenna lead)
Connect it to the car power supply terminal for
antenna
Green/Black
8) Connecting the Accessories
•Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
26
Autogood products Internet store “130”
.u
a
om
13
0.
c
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2010: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
PN:127075002440
Autogood products Internet store “130”