PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
13
0.
co
m
.u
a
Owner’s manual & Installation manual
Mode d’emploi et manuel d’installation
Manual de instrucciones y de instalación
Bluetooth® CD/USB/MP3/WMA RECEIVER
LECTEUR CD/USB/MP3/WMA Bluetooth®
RECEPTOR Bluetooth® CD/USB/MP3/WMA
Autogood products Internet store “130”
a
.u
Italiano
English
co
m
English
Español
0.
Français
13
English
English
English
English
Autogood products Internet store “130”
2
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
Español
a
.u
co
m
Italiano
Español
0.
Español
13
Français
Español
1. FEATURES.......................................................................................................................... 4
Expanding Systems............................................................................................................ 4
2. PRECAUTIONS................................................................................................................... 5
Front Panel......................................................................................................................... 6
USB Port............................................................................................................................. 6
Remove the DCP................................................................................................................ 7
Re-attach the DCP.............................................................................................................. 7
Storing the DCP in the DCP Case....................................................................................... 7
3. CONTROLS......................................................................................................................... 8
Operational Panel............................................................................................................... 8
Names of Buttons............................................................................................................... 8
Remote Control.................................................................................................................. 9
Using the Remote Control................................................................................................... 9
4. CAUTIONS ON HANDLING.............................................................................................. 10
Handling Discs................................................................................................................. 10
5. OPERATIONS................................................................................................................... 11
Basic Operations.............................................................................................................. 11
Radio Operations.............................................................................................................. 12
Satellite Radio Mode........................................................................................................ 13
HD Radio Operations........................................................................................................ 14
iTunes® Tagging................................................................................................................ 15
CD/MP3/WMA Operations................................................................................................ 16
USB Operations................................................................................................................ 18
iPod & iPhone Operations................................................................................................. 18
AUX Operations................................................................................................................ 18
Bluetooth Operations........................................................................................................ 19
Audio Setup...................................................................................................................... 21
System Setup................................................................................................................... 21
6. TROUBLE SHOOTING...................................................................................................... 22
7. ERROR DISPLAY.............................................................................................................. 23
8. SPECIFICATIONS............................................................................................................. 24
9. INSTALLATION / WIRE CONNECTION GUIDE............................................................... 25
English
Contents
Español
Español
Autogood products Internet store “130”
3
Français
English
• HD Radio™ and XM Radio Ready
• Compatible with iPod®/iPhone™ via USB
• 6ch/4V RCA Output with Subwoofer Control and BEAT-EQ with 3 Band Parametric
Equalizer
• MP3/WMA compatible with ID3-TAG display
• Built in Bluetooth handsfree (HFP) and audio streaming (A2DP & AVRCP)
• Rear USB
• IR remote controller included
• OEM Steering Wheel Remote Ready
English
co
m
.u
Italiano
a
English
1. FEATURES
Expanding Systems
13
Español
0.
Expanding audio features
4-channel amplifier
English
iPod/iPhone
English
USB memory
English
4
Bluetooth®
cellular phone
Note:
XM tuner to be
connected
Portable player
(Connect by
AUX IN jack)
HD Radio receiver
THD300 to be connected
Items outside of the frames are commercially
available.
Autogood products Internet store “130”
English
2. PRECAUTIONS
WARNING
a
.u
co
m
0.
13
7. HD Radio™ and the HD Radio Ready logo
are proprietary trademarks of iBiquity
Digital Corporation.
87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.
CET APPAREIL NUM ÉRIQUE DE LA CLASSE B EST CONFORME À
LA NORME NMB-003 DU CANADA
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
Español
The HD Radio Ready logo is proprietarily trademark of iBiquity Digital Corp.
MANUFACTURED:
URF
IC 419C-CZ500
Bluetooth ID: B014652
FCC ID:AXRCZ500
Clarion Co., Ltd.
MADE IN CHINA
PN.: 12707000XXXX
Autogood products Internet store “130”
Español
Español
5. “Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been
certified by the developer to meet Apple
performance standards.
530-1710kHz
Español
4. This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy, and
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to consult the dealer or an
experienced radio/TV technician for help.
Español
3. This unit uses a precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
6. ©2009 SIRIUS XM Radio Inc., SIRIUS,
XM and all related marks and logos are
trademarks of SIRIUS XM Radio Inc. and
its subsidiaries.
All other marks, channel names and logos
are the property of their respective owners.
Italiano
2. Vibrations resulting from driving on bumpy
roads may cause the sound to skip.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifically to iPhone and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards.
iPod and iTunes® are trademarks of Apple
Inc., registered in the U.S. and other
countries.
iPhone is a trademark of Apple Inc.
Español
1. When the inside of the car is very cold and
the player is used soon after switching
on the heater, moisture may form on the
disc or the optical parts of the player and
proper playback may not be possible. If
moisture forms on the disc, wipe it off with
a soft cloth. If moisture forms on the optical
parts of the player, do not use the player
for about one hour. The condensation
will disappear naturally allowing normal
operation.
Français
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
5
a
.u
Italiano
English
• Use a soft, dry cloth and gently wipe off the
dirt.
• For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
• Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
Español
• When a USB memory stick is used, it may
stick out presenting the possibility of injury. Use a USB extension cable to prevent this
hazard.
• The USB memory sticks must be
recognized as “USB mass storage class”
to work properly. Some models may not
operate correctly.
Clarion will not be held liable in the unlikely
event of loss of or damage to memorized
data.
When using an USB memory stick, we
recommend that you backup your data on
a personal computer.
• Data files may be lost or become corrupted
when using USB memory sticks in the
following situations: When the USB
memory stick is disconnected or the power
is turned off during data read or write.
When affected by static electricity or
electric noise.
When the USB memory stick is connected
or disconnected while the contents are
being accessed.
• Some USB memory sticks cannot be
inserted to the main unit because of their
shape. In such cases, use a commercial
USB extension cable to connect them.
• Connection to a computer is not supported.
• Music files (MP3, WMA, etc.) stored in the
USB memory stick cannot be played back.
co
m
English
Cleaning the body
0.
Français
For a longer service life, be sure to read the
following cautions.
• Do not allow any liquids on the set. Doing
so may damage the internal circuitry.
• Do not disassemble or modify the set in
any way. Doing so may result in damage.
• Do not let cigarettes burn the display.
Doing so may damage or deform the body.
• If a problem should occur, have the set
inspected at your store of purchase.
• The remote control unit may not work if the
remote control sensor is exposed to direct
sunlight.
USB Port
13
English
Front Panel
English
English
English
6
Autogood products Internet store “130”
English
Remove the DCP
Français
The control panel can be detached to prevent
theft. When detaching the control panel, store
it in the DCP (DETACHABLE CONTROL
PANEL) case to prevent scratches.
We recommend taking the DCP with you
when leaving the car.
1. Press the [ ] button (2 sec.) to turn off the
power.
2. Depress the [OPEN] button to unlock the
DCP.
3. Grab the edge that pops out and remove
the DCP.
Español
.u
co
m
Español
Storing the DCP in the DCP Case
0.
13
Español
DCP case
Español
DCP
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be carefully not
to drop it or subject it to strong shocks.
• The connector connecting the source
unit and the DCP is an extremely
important part. Be careful not to damage
it by pressing on it with fingernails,
screwdrivers, or other hard objects.
Español
Hold the DCP, in the orientation as shown in
the figure below, and put it into the supplied
DCP case. (Ensure the DCP is in the correct
orientation.)
Italiano
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
a
Re-attach the DCP
Note:
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.
Español
Autogood products Internet store “130”
7
English
3. CONTROLS
Operational Panel
Français
[BAND/
] [MENU/
]
Disc slot
[
]
English
] [PS/AS]
[ISR]
[POWER/SRC] [VOLUME]
Names of Buttons
Español
[MENU /
] button
• System menu/Terminate call
[1~6]
[ISR] button
• Recall ISR station stored in memory and
store current station in ISR memory (long
press)
• iTunes Tagging (when connected with HD
Radio module)
English
English
[OPEN] button
• Unlock the front panel.
[1–6] button
• [1] button: Scan play/Preset station 1.
• [2] button: Repeat play/Preset station 2.
• [3] button: Random play/Preset station 3.
• [4] button: Play/Pause/Top play (long
press)/Preset station 4.
• [5] button: Previous folder/Preset station 5.
10 tracks down (long press)
• [6] button: Next folder/Preset station 6.
10 tracks up (long press)
[PS / AS] button
• Preset scan/Auto memory store
[D] button
• Display switch/System menu
[ ] button
• Eject the disc in the unit.
,
] button
[
• Previous (Next)/Search
[SOUND] button
• Sound effect setting
[VOLUME] knob
• Adjust volume level/Confirm
English
8
AUX jack
[D]
co
m
[BAND /
] button
• Select tuner band/Dial/Answer
0.
English
[ / SRC] button
• Power/Toggle the audio source
13
Italiano
[OPEN]
[SOUND]
a
,
.u
[
Autogood products Internet store “130”
[RDM] button
• Random play
[
,
] button
• Previous (Next)/Search
[RPT] button
• Repeat play
Français
[POWER/SRC] button
• Power/Toggle the audio source
English
Remote Control
[MUTE] button
• Mute audio output
[POWER/
SRC]
SRC
BND
POWER
DISC UP
TOP
[BND/TOP]
[BND/TOP] button
• Select tuner band/Top play
[
a
[MUTE]
]
MUTE
SCN
PS/AS
ISR
DISP
RPT
RDM
[RDM]
TV/VTR
[RPT]
13
Español
0.
co
m
[SCN/
PS/AS]
[ISR]
[DISP]
Using the Remote Control
7. Store the battery in a place where children
cannot reach to avoid the risk of accident.
Inserting the battery
Español
Autogood products Internet store “130”
Insertion guide
Español
1. Slide remote control unit’s rear cover in the
direction shown.
2. Insert battery (CR2025) into insertion
guides with printed side (+) up.
3. Press battery into compartment as shown.
4. Replace and slide cover until it clicks into
place.
Español
1. Aim the remote control at the remote
sensor on the unit.
2. Remove the battery from the remote
control or insert a battery insulator if the
battery has not been used for a month or
longer.
3. DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function
properly.
4. Use button shaped lithium battery CR2025
(3 V) only.
5. DO NOT recharge, disassemble, heat or
expose the battery to fire.
6. Insert the battery in proper direction
according to the (+) and (-) poles.
Español
[ISR] button
• Recall ISR station stored in memory
(short press) and store current
station in ISR memory (long press)
• iTunes Tagging (when connected
with HD Radio module)
[
]
]
.u
[
] button
• Play/Pause
[DISP] button
• Display switch
,
,
Italiano
[ , ] button
• Volume up/down
[
Español
[SCN/PS/AS] button
• Scan play/Preset scan/Auto
memory store
9
Handling Discs
Handling
Roughness
On discs
English
Español
English
• Never stick labels on the surface of the
disc or mark the surface with a pencil or
pen.
• Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc. Use of such
discs may cause misoperation or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
co
m
Italiano
• Exercise a good precaution when loading
a disc. The operation panel will close
automatically when leaving it open for a
while.
• Never turn off the power and remove the
unit from the car with a disc loaded.
a
Pen
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
0.
English
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the disc to the outer edge.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing it.
13
Français
English
English
10
• New discs may have some roughness
around the edges. If such discs are used, the player may not work or the sound may
skip. Use a pen or similar tool to remove
any roughness from the edge of the disc.
Cleaning
.u
English
4. CAUTIONS ON HANDLING
Storage
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Autogood products Internet store “130”
English
5. OPERATIONS
Basic Operations
Power on/off
Press the [SRC] button on the front panel
or the remote control repeatedly to choose
desired playing source.
Notes:
1. Playing source selection means selecting
work mode, such as DISC mode, Radio
mode, Aux mode, etc.
2. When some devices are not ready, they
cannot be selected.
co
m
Engine ON position
13
Press the [D] button on the front panel or
[DISP] button on the remote control to switch
the display information, system time and
playing source.
Español
2. Press the [ ] button on the front panel or
[POWER] button on the remote control to
turn on the power while in standby mode.
The unit goes back to the last status after
power on.
3. Press and hold the [ ] button on the front
panel or press the [POWER] button on the
remote control to turn off the power while in
work mode.
Display system time
Español
0.
Playing source selection
Español
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the car’s battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
1. Start the engine. The power button will light
up.
While driving, keep the volume level at
which external sounds can be heard.
Italiano
Notes:
CAUTION
Español
Before turning off the unit, return the
volume to a lower level. Restarting
playback with the volume at maximum
increases the possibility of damage to the
speakers or your hearing.
Turn the [VOLUME] knob on the front panel
or press the [ , ] button on the remote
control.
The adjustable range of volume is 0 to 40.
a
CAUTION
Volume adjustment
Français
Be sure to read this chapter referring to the
chapter “3. CONTROLS.”
.u
Note:
Mute
Note:
Pressing the [MUTE] button again or
adjusting volume will release muting.
Español
Press the [MUTE] button on the remote
control to mute the volume from the unit.
Español
Autogood products Internet store “130”
11
Press the [SRC] button once or more to enter
radio mode.
Français
Select one radio band
Press the [BAND] button on the panel or
[BND] button on the remote control to select
one radio band among FM1, FM2, FM3, AM.
Manual tuning
English
Note:
Español
When a station is received, searching stops
and the station is played.
If the unit receives a stereo broadcast, the
indicator light of stereo ‘ST’ on the LCD
display lights.
Auto store
Press one numeric button among 1 to 6 on
the panel or the remote control to select the
corresponding stored station.
Local seeking
When LOCAL seeking is on, only those
radio stations with strong radio signal can be
received.
Press and hold the [D] button on the
front panel, then press the [
] button
repeatedly until LO or DX displays on the
screen, and rotate the knob to select Local or
Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
co
m
Press and hold the [
]/[
] button on
the front panel or the remote control to seek a
higher/lower station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
0.
Italiano
Auto tuning
13
English
During manual tuning, the frequency will be
changed in steps.
Press the [
]/[
] button on the front
panel or the remote control to tune in a higher/
lower station.
Recall the stored stations
a
Select tuner as playing source
.u
English
Radio Operations
English
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] (2 sec.) button to
start automatic station search.
To stop auto store, press other buttons having
radio functions.
Note:
Be careful not to press and hold the [PS/AS]
button for two seconds or longer, otherwise
the auto store function is engaged and the
unit starts storing stations.
Note:
English
English
12
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has four bands: FM1, FM2,
FM3 and AM. FM3 and AM can store by
AS function. Each bands can store six
stations, CZ500 can store 24 stations in
total.
Manual store
While tuned into a desired radio station, press
and hold number button 1–6 to store it in the
memory.
Autogood products Internet store “130”
0.
Select a band
13
Press the [BAND] button to change between
three SAT bands (SAT1, SAT2 and SAT3).
Each band stores up to six preset stations.
Selecting a station
] tuning button to tune
Preset mode
Six numbered preset buttons store and recall
stations for each band.
Short press the [PS/AS] button to start
category scaning.
Long press the [PS/AS] button to start preset
station scaning for 10 seconds each.
a
To access Direct Search mode, press the
[MENU] button on the front panel.
1. Rotate the [VOLUME] knob on the panel
to select the desired direct, and press the
knob to confirm the selection.
2. Rotate the [VOLUME] knob on the panel
or press the up/down arrow buttons on
the remote control to select the direct
name, and press the knob to confirm the
selection.
Autogood products Internet store “130”
Español
1. Select a band (if needed), then select a
station.
2. Press and hold a preset button (numbers
1–6) on the front panel.
Español
Preset scan
Direct search
Español
To access Category Search mode, press the
[MENU] button on the front panel.
1. Rotate the [VOLUME] knob on the panel to
select the desired category, and press the
knob to confirm the selection.
2. The list of available categories appears
on the screen. Rotate the [VOLUME] knob
on the panel or press the up/down arrow
buttons on the remote control to select and
press the knob to confirm.
3. The list of stations in the selected category
appears on the screen. Rotate the
[VOLUME] knob on the panel or press
the up/down arrow buttons on the remote
control to select the category name, and
press the knob to confirm the selection.
Español
If XM tuner is not connected, “XM TUNER”
will appear on the LCD.
Storing a station
Category search
co
m
Check XM tuner
Press the [ ] or [
to another station.
To access Channel Search mode, press the
[MENU] button on the front panel.
1. Rotate the [VOLUME] knob on the front
panel to select the desired channel, and
press the knob to confirm the selection.
2. Rotate the [VOLUME] knob on the panel
or press the up/down arrow buttons on
the remote control to select the channel
name, and press the knob to confirm the
selection.
Español
Before you listen to satellite radio, you must
subscribe to the service using your radio’s
identification number. To display the radio ID,
use the [ ] tuning button to tune to channel
“000”. The screen displays the radio ID where
the channel name is usually displayed.
Channel search
.u
Displaying the Identification (ID)
Code
1. Select a band (if needed).
2. Press a front panel preset button (numbers
1–6) to select the corresponding stored
station.
Italiano
Press the [SRC] button on the front panel
or the remote control to switch to the SAT
source.
Recalling a station
Español
Accessing satellite radio mode
3. The preset number and station is displayed
and highlighted.
Français
Listeners can subscribe to XM® Radio on
the Web by visiting www.xmradio.com, or by
calling (800) 967-2346. Customers should
have their Radio ID ready (see “Displaying
the Identification (ID) Code”). Customers
can receive a limited number of free-to-air
channels without activation.
Listeners can subscribe to Sirius® Radio on
the Web by visiting www.sirius.com, or by
calling (888) 539-SIRIUS. Customers should
have their Sirius ID ready (Sirius ID is located
on the Satellite Radio Tuner, sold separately).
Customers can listen to music samples by
tuning to channel 184.
English
Satellite Radio Mode
13
Press the [SRC] button on the front panel or
remote control to switch to the RADIO source,
and HD icom will light when a THD300 is
connected.
English
Select a band
Press the [BAND] button to change between
three FM and one AM bands. Each band
stores up to six preset stations.
Español
Tuning
Up to six stations on each band can be
stored as presets, which can then be instantly
recalled by pressing the associated preset
button. To store a station, turn the radio on
and select the desired band and station.
Press and hold the desired preset button
(numbered one through six on the face of the
radio or remote control) for more than two
seconds. When stored, the preset number
will appear in the display. The station is now
stored and can be recalled by pressing the
corresponding preset button. Repeat for the
remaining five presets on the current band
and for presets on the other four bands.
NOTE: Multicast stations can be stored as
presets, but the unit must be in Digital or
Auto reception mode to receive them.
a
Italiano
Accessing radio mode
Preset stations
Preset scan
Press the [PS/AS] button to scan and play all
preset stations for 10 seconds each. Press
the [PS/AS] button again to stop scanning
and play the current station.
co
m
English
NOTE: Not all FM or AM stations offer
HD Radio (digital) broadcasting. You can
receive both analog and digital stations
with the unit.
0.
Français
HD Radio technology allows CD-quality digital
broadcasting of your local AM and FM radio
stations. HD Radio broadcasts can include
multiple channels on the same frequency,
which is called multicasting. With multicasting,
you can receive up to eight additional
multicast channels: HD1–HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers HD Radio technology.
.u
About HD Radio™ technology
English
- Seek Tuning
Press and hold the [ ] or [ ] button to
seek the next/previous station automatically.
- Manual Tuning
Press the [
] or [
] button to move the
radio frequency number up or down one step.
13
English
English
English
14
HD Radio Operations
HD radio multicast channels
To tune to an HD Radio multicast channel,
tune to the main signal and then press the
[MENU] button on the front panel. PTY is
displayed. Select PTY or SUB CH by rotating
the [VOLUME] knob and press to confirm.
• Select PTY type from the category list by
rotating the [VOLUME] knob and press it.
• Select SUB CH by rotating the [VOLUME]
knob and press it.
• Multi channel is available when a digital
signal is detected, the DIGITAL icon
will light. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Automatic store (AS)
Press and hold the [PS/AS] button to select
six strong stations and store them in the
current band using the auto store function.
After entering the stations into memory, the
unit will automatically stop at each station for
five seconds, allowing you to preview each
selection. When using the auto store function,
the new stations replace any stations already
stored in preset memory.
NOTE:
You can stop the auto store function at any
time by pressing the [PS/AS] button again.
Autogood products Internet store “130”
Note:
Español
Español
0.
13
Autogood products Internet store “130”
Español
STORE ##/64
Reason
If the Tags data is ready, and
the [ISR] button is pressed
Tags data is sending to iPod
Tag storage is full
Tag data is not available
iPod memory is full
1. How to enter the iTunes tagging function?
“TAG” and “DIGITAL” light up when Tagging
function is ready, press the [ISR] button to
start iTunes Tagging.
2. What is seen on the radio’s display to let
me know I have tagged the tune?
Press the [ISR] button to show
“STORINGTAG”. After connect to a iPod,
the display shows “SENDING 01”.
If no connection with iPod, the display
will show “STORE ##/64”. You could save
64 Tag into E2PROM in total. When you
connect to a iPod, Tag information will
be saved in the iPod, and the data in
E2PROM will be cleared.
3. Then how do I get the tagged tune from my
iPod to the computer?
If you have install iTunes, connect your
iPod to your computer and buy songs
online.
Español
Table 5: TAG Messages
SENDING ##
MEMO FULL
DEFFICIENT
IPOD FULL
When transferring Tags to an iPod, the unit
must remain in Radio mode. To purchase
tagged songs, you must sync your iPod to
iTunes and then click the “Tagged” list on the
left side of the iTunes software screen. Click
the “View” button for purchasing information.
Note:
To begin tagging music, tune to an HD Radio
station. The DIGITAL icon at the display must
be illuminated, indicating a digital station
is being received. TAG icon lights up when
Tagging function is ready. Press the [ISR]
button on the unit. Proper tagging depends
very much on good radio reception. If the
reception is poor, tagging will be affected.
“STORE ##/64” will appear in the display. The
song information is saved to the unit memory
until an iPod is connected. You can tag up to
64 songs before the tags must be transferred
to an iPod or deleted. When the Tag memory
reaches capacity (64 tags) the bottom of the
screen displays “MEMO FULL”.
Tag Message
Note:
co
m
Tagging music
To download tags to your iPod, plug an iPod
into the unit. All existing tags are automatically
transferred to the iPod and deleted from the
head unit’s memory. If an iPod is connected
when a song is tagged, the Tag will be
immediately transferred to the iPod.
Español
• iPhones can also be connected to this
system and “iPod” appearing in this manual
should be referred to as “iPod/iPhone”.
• This system will not operate or may
operate improperly with unsupported
versions.
Downloading tags to your iPod
Italiano
For detailed information on the playable iPod
models, see our home page: www.clarion.
com
Tags saved to your iPod can be managed
using the iTunes software, available at www.
apple.com/itunes.
a
iPod compatibility
Note:
Español
“iTunes® Tagging” function works by
connecting THD300 (sold separately).
An iPod without Tagging
function is connected and the
[ISR] button is pressed
.u
Note:
NOT SUPPORT
Français
The CZ500 offers iTunes® Tagging, which
allows the user to “Tag” songs playing on HD
Radio™ stations for purchase later through
iTunes. When you press the [ISR] button, the
unit stores the title and artist song information
that can then be transferred to your iPod when
connected to the unit. A list titled "Tagged" will
appear in iTunes, allowing you the option to
purchase your tagged songs.
English
iTunes® Tagging
15
Note:
To disable DRM (Digital Rights
Management)
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps/VBR
2. WMA: Bit rate 8 kbps-320 kbps
Folder structure
A disc with a folder having more than eight
hierarchical levels cannot be used.
Number of files or folders
1. Up to 999 files can be recognized per
folder.
Up to 3000 files can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks might
not always be played in the order displayed
on the PC.)
3. Some noise may occur depending on
the type of encoder software used while
recording.
Backup eject function
Just pressing the [
] button, ejects the disc
even if the power to the unit is not turned on.
Notes:
English
co
m
Italiano
Precautions when creating MP3/
WMA file
Español
English
File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3, WMA file by using single
byte letters. If you add a file extension
other than specified or forget to add the file
extension, the file cannot be played.
2. Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR files are played, the play time
on the display may differ from the actual
play location.
* When MP3/WMA files are played, there
is silence between tunes.
0.
English
hen using Windows Media Player 9/10/11,
W
click on Tool → Options → Copy Music tab,
then under Rip settings, uncheck the Copy
Protect Music box. Then recreate the files.
When you disable DRM, you do so at your
own responsibility.
13
Français
English
English
16
If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no
audio is output (The WMA indicator blinks).
3. Do not affix a name to a file inside a folder
having the same name.
a
This unit can play back MP3/
WMA files
.u
English
CD/MP3/WMA Operations
Logical format (File system)
1. When writing MP3/WMA files on a CD-R
disc or CD-RW disc, please select ISO
9660 level 1 or 2, Joliet, Romeo or Apple
ISO as the writing software format. Normal
play may not be possible if the disc is
recorded in another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
• Forcing a CD into the disc slot before auto
reloading can damage the CD.
• If a CD (12 cm) is left in the ejected
position for 15 seconds, the CD is
automatically reloaded (Auto reload).
Listening to a disc already
loaded in the unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert a CD into the center of the disc slot
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the disc
slot.
• If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
• Discs not bearing the
or
mark
and CD-ROMs cannot be played by this
unit.
Autogood products Internet store “130”
TEXT
TEXT
Displaying CD titles
Notes:
co
m
Selecting a track
The top function resets the CD player to the
first track of the disc. Press and hold the
[TOP] button on the front panel or press the
[TOP] button on the remote control to play the
first track (track No. 1) on the disc.
* In case of MP3/WMA, the first track of a
folder being played will be returned.
0.
13
Autogood products Internet store “130”
Español
Fast-forward
Press and hold the [
] button.
Fast-reverse
Press and hold the [
] button.
* For MP3/WMA discs, it takes some time
until the start of searching and between
Español
Fast-forward/Fast-reverse
Español
Track-down
1. Press the [
] button to move back to the
beginning of the current track.
2. Press the [
] button twice to move back
to the beginning of the previous track.
3. Press and hold the [ 5 ] button to move
back 10 tracks.
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on
a disc.
Press the [SCN] button to perform scan play.
Repeat play
This function allows you to repeat playback
of a track.
1. Press the [RPT] button once or more until
“TRK RPT” appears on the LCD to perform
repeat play.
2. Press the [RPT] button repeatedly until
“FOLD RPT” appears on the LCD for folder
repeat play.
3. Press the [RPT] button repeatedly until
“RPT OFF” appears on the LCD to cancel
repeat playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [RDM] button to perform random
play.
Random play starts with the next played track
when Random function is on.
Español
Track-up
1. Press the [
] button to move ahead to
the beginning of the next track.
2. Each time you press the [
] button, the
track advances ahead to the beginning of
the next track.
3. Press and hold the [ 6 ] button to move
ahead 10 tracks.
Other various play functions
Español
• If the CD playing is not a CD-text CD or
no user title has been input, “NO TITLE”
appears in the display.
• If MP3/WMA disc is not input TAG, “NO
TITLE” appears in the display.
• Only ASCII characters can be displayed in
Tags.
Top function
Italiano
MP3/WMA disc
FILE → FOLDER → TITLE/ALBUM → ARTIST
→ FILE →
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2. To select a track, press the [
] or [
]
button.
Español
You can press the [D] button to change the
title display ON or OFF.
When the SCROLL function is ON, the unit
can display title data for MP3/WMA disc.
Folder select
Français
1. Press the [ 4 /
] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [ 4 /
]
button again.
a
Pausing play
tracks. In addition, the playing time may
have a margin of error.
.u
• Some CDs recorded in CD-R/CD-RW
mode may not be usable.
English
CD/MP3/WMA Operations
17
Italiano
Connect an iPod or iPhone to the USB using
a USB cable.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback starts.
MENU
English
Press the [MENU] button repeatedly to show
PLAY LISTS, rotate the knob to show PLAY
LISTS / ARTISTS / ALBUMS / GENRES /
SONGS / COMPOSERS, press and rotate the
knob to select a desired option, then press
the knob to confirm. Repeat play
1. Press the [RPT] button once or more until
“TRK RPT” appears on the LCD to perform
repeat play.
2. Press the [RPT] button repeatedly until
“ALL RPT” appears on the LCD for all
tracks repeat play.
3. Press the [RPT] button repeatedly until
“RPT OFF” appears on the LCD to cancel
repeat playback.
a
Connect
.u
English
iPod & iPhone Operations
Random play
co
m
Français
1. Insert a USB device into the USB
connector.
When connecting a USB device, the unit
will read the files automatically.
2. To remove the USB device, you should first
select another source, in order to avoid
damaging the USB device. Then remove
the USB device.
This function allows you to play the current
track repeatedly or play all tracks in your iPod/
iPhone repeatedly.
13
Español
0.
English
USB Operations
English
AUX Operations
Press the [SRC] button on the panel or
remote control to select AUX.
AUX is just for Audio content with 3.5 mm
Jack connector plugged into audio-in socket
on the front panel.
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press the [RDM] button repeatedly until
“RDM ALBUM” appears on the LCD for
album random play.
2. Press the [RDM] button once or more until
“RDM SONG” appears on the LCD to
perform random play.
3. Press the [RDM] button repeatedly until
“RDM OFF” appears on the LCD to cancel
random playback.
AUX input sensitivity setting
English
1. Press and hold the [D] button.
2. Press the [
,
] button to select “AUX
SENS”.
3. If the output level of connected external
audio player is “High”, rotate [VOL/SEL]
knob and choose “AUX LOW”. And if the
output level is “Low”, choose “AUX HIGH”.
English
18
Autogood products Internet store “130”
a
Operation from Bluetooth menu
Press the [SRC] button to switch the source
to “BLUETOOTH MUSIC”. Press the [MENU]
button to select a way to make outgoing call:
.u
• Dial Number
Same operation as “Direct Number Call”.
co
m
0.
13
Autogood products Internet store “130”
Español
Direct Number Call
Press the [ ] and [MENU] button to select
DIAL NUM.
Español
Make a call
• Call from Phonebook
User can search the contact name in the
phonebook and make call.
1. Rotate the knob to select “SIM PHONE
BOOK”, “MEMORY PHONE BOOK“ or
“TETEPHONE BOOK” .
2. Press the [VOLUME] knob to enter the
selected phonebook.
3. Use the [ ] / [ ] buttons on the remote
control or rotate the [VOLUME] knob to
scroll the contacts.
4. When the contact name is displayed, press
the [ ] button to call the mobile phone
No. of that contact.
* Press the [
] button to end the call.
Español
1. Turn on Bluetooth function of your mobile
phone.
2. Enter the mobile phone’s Bluetooth setup
menu.
3. Search for new Buetooth devices.
4. Select CZ500 from the pairing list on the
mobile phone.
5. Enter “0000” as the password.
6. After pairing successfully, the unit will
enter Bluetooth mode automatically, and
“BLUETOOTH CONNECTED” will appear
on the LCD.
Español
Handsfree Operations
Pairing
Español
• Dialled/Missed/Received Call History
You can search any Dialled/Missed/Received
Call History.
1. Rotate the knob to select “DIALLED”,
“MISSED” or “RECEIVED”.
2. Press the [VOLUME] knob to enter the
selected call history.
3. Use the [ ] / [ ] buttons on the remote
control or rotate the [VOLUME] knob to
scroll the contacts.
4. When the contact name or mobile phone
No. is displayed, press the [ ] button to
call the mobile phone No. of that contact.
* Press the [
] button to end the call.
Italiano
• Do not place the Bluetooth handsfree
microphone where it will be directly
affected by blowing air such as in front of
air conditioning vents. This may cause a
malfunction.
• Leaving it exposed to high temperatures
or direct sunlight can cause distortion
or discoloration which may result in a
malfunction.
• This system will not operate or may
operate improperly with some Bluetooth
audio players.
• Clarion cannot guarantee the compatibility
of all mobile phones together with CZ500.
• Audio playback will be set to the same
volume level as set during telephone calls.
This might cause problems, if extreme
volume level is set during a telephone call.
Español
Notes:
1. Press the [ ] or [MENU] button.
2. Press the [VOLUME] knob on the front
panel or press the [ ] / [ ] button on
the remote control to switch: DIALLED
CALL/MISSED CALL/RECEIVED
CALL/MEMORY PHONEBOOK/SIM
PHONEBOOK
3. Press the [VOLUME] knob to confirm the
selection, “WAITING” will appear on the
LCD.
4. Press the [ ] to dial.
5. Press [
] to terminate call.
Français
Bluetooth allows you to utilize your car’s builtin audio system for wireless mobile phone
or music handsfree communication. Some
Bluetooth mobile phones have the audio
features, and some portable audio players
support Bluetooth. This system can play audio
data stored in a Bluetooth audio device. A car
stereo with Bluetooth installed will be able to
retrieve phonebook contacts, received calls,
dialed calls, missed calls, incoming calls,
outgoing calls and listen to music.
English
Bluetooth Operations
19
Track-down
1. Press the [
] button to move to the
beginning of the previous track.
2. Each time the [
] button is pressed,
playback proceeds to previous track in the
reverse direction.
Audio Streaming Operations
What is audio streaming?
Notes:
English
Español
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy
during the song playback.
Audio streaming may or may not resume
after telephone interrupt as this is
dependent on mobile phone.
System will always return to Radio mode
if audio streaming is disconnected.
a
.u
Italiano
CAUTION
co
m
English
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their car stereo wirelessly and listen to the
tracks through the car’s speakers. Please
consult your nearest Clarion dealer for more
information on wireless audio streaming
transmitter products offered.
Playing order will depend on the Bluetooth
] button is
audio player. When the [
pressed, some A2DP devices will restart
the current track depends on the duration of
playback.
During music streaming playback, “A2DP” will
be shown on the display. Information about
tracks (e.g. the elapsed playtime, song title,
etc.) cannot be displayed on this unit.
When A2DP device is disconnected, “BT
DISCONNECT” will be shown on the display
and return to previously selected audio
source. Some Bluetooth audio players may
not have play/pause synchronized with this
unit. Please make sure both device and main
unit are in the same play/pause status in BT
MUSIC mode.
Note:
0.
Français
• Answering a call
You can answer an incoming call by pressing
the [ ] button.
* Press the [
] button to reject an incoming
call.
13
English
English
English
English
20
Bluetooth Operations
Be sure to read the section “Pairing” before
proceeding.
Play/Pause a track
1. Press the [ 4 /
] button to pause audio
playback.
2. To resume audio playback, push the [ 4 /
] button again.
Selecting a track
Track-up
1. Press the [
] button to move to the
beginning of the next track.
2. Each time the [
] button is pressed,
playback proceeds to another track in the
advancing direction.
Autogood products Internet store “130”
,
Press the [SOUND] button, then press [
] to select USER preset including:
BALANCE → FADER → M-B EX → LPF(low
pass filter) → SUBW VOL, rotate the
[VOLUME] knob to select a value.
BALANCE: LEFT 1-7→ CENTER → RIGHT
1-7
FADER: LEFT 1-7→ CENTER → RIGHT 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6) - (+6)
Français
Press the [SOUND] button to enter sound
effect setting mode. First press shows current
EQ. Rotate the [VOLUME] knob to change
the options in the following order: OFF →
B-BOOST → IMPACT → EXCITE → CUSTOM
English
Audio Setup
Español
System Setup
a
.u
co
m
BEEP: ON/OFF
Rotate the knob to choose button beep sound
on or off.
0.
13
SCRN SVR: ON/OFF
Rotate the knob to choose screen saver on
or off.
While in BT mode, press and hold the [D]
button to enter BT MENU. Press [
,
] to
select options, rotate the [VOLUME] knob to
adjust.
AUTO CON
Rotate the knob to choose connect
automatically or not.
PIN CODE
Rotate and press the knob to choose a 4-digit
password. Press the knob more than two
seconds to confirm.
Español
Autogood products Internet store “130”
Español
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK →
FOLDER → FILE → ALBUM → TITLE →
ARTIST → TRACK → ...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by pressing the [DISP]
button.
BT menu
Español
AUX SENS
While in AUX mode, rotate the knob to choose
AUX Input sensitivity LOW, MID or HIGH.
12/24H
Rotate the knob to choose time format: 12 or
24 hour.
Español
DX/LO
Rotate the knob to choose radio local or
distant.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals can
be received.
Español
CLOCK
Press the knob to enter clock setting mode.
Rotate the knob to set clock, press [ ] or
[ ] to select hour or minute, press and hold
the knob to confirm.
DIMMER: ON/OFF
Rotate the knob to choose dimmer on or off.
ON: The LCD is dimmed when the interior
light is on.
OFF: The LCD stays at maximum brightness.
Italiano
Press and hold the [D] button to enter system
,
] to select options,
MENU. Press [
rotate the [VOLUME] knob to adjust.
21
General
Problem
Cause
Measure
Unit fuse blown.
Install new fuse with correct rating.
Unit does not turn
on.
Nothing happens
when buttons are
pressed.
Illegal operation.
Turn off the power and open the operation panel.
Press the Reset button with a thin rod.
Note:
When the Reset button is pressed, turn off the ACC
power.*
Car battery fuse blown.
Install new fuse with correct rating.
Battery depleted.
Change the battery.
Install the battery correctly.
a
Battery installed incorrectly.
Improper audio output connection.
Volume set too low.
No/low audio
output.
Speakers damaged.
Heavily biased volume balance.
Check wiring and correct.
Increase volume level.
Replace speakers.
Adjust the channel balance to center position.
English
co
m
Italiano
Remote control
does not work.
*When the Reset button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
Speaker wiring is in contact with
metal part of car.
Non-standard disc used.
Speaker power rating does not
Poor sound quality match unit.
or distortion.
Wrong connections.
Español
0.
English
Display is not
accurate.
Speaker is shorted.
Unit resets itself
Incorrect connection between ACC
when engine is off. and battery.
13
Français
Unit does not turn
on.
.u
English
6. TROUBLESHOOTING
Insulate all speaker wiring connections.
Use a standard disc.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check wiring and correct.
English
DISC player
Problem
Disc cannot be
loaded.
English
Sound skips or is
noisy.
Cause
Another disc is already loaded.
There is a foreign object already in
place.
Compact disc is dirty.
Compact disc is heavily scratched or
warped.
Measure
Eject the disc before loading the new one.
Eject the foreign object forcibly.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Sound is bad directly Water droplets may form on the internal
after power is turned lens when the car is parked in a humid Let dry for about one hour with the power on.
on.
place.
English
22
Autogood products Internet store “130”
Problem
Cause
Measure
The USB device has been inserted Reversing the connection direction of the USB
USB device cannot be with wrong direction.
device, try it again.
inserted.
The USB connector is broken.
Replace with a new USB device.
No sound heard with
the display “No File”
shown.
No MP3/WMA file is stored in the
USB device.
Store these files properly in the USB device.
MP3/WMA files are not encoded
properly.
Use MP3/WMA files encoded properly.
Bluetooth
Measure
Refer to the user manual of the device for how to
enable the function.
co
m
Adjust the position of the microphone.
For example, stick the microphone onto the
dashboard close to the driver.
13
Español
0.
Move the device closer to the car audio system or
remove any obstacle between the device and the
system.
Español
7. ERROR DISPLAY
If an error occurs, one of the following errors is displayed.
Take the measures described below to solve the problem.
Display
Measure
Disc is inserted incorrectly.
Eject the disc then reload it properly.
This is a failure of deck’s mechanism.
Consult your store of purchase.
The disc format is not supported.
Try another disc.
Autogood products Internet store “130”
Español
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
Español
ERROR
Cause
Español
The microphone is not correctly
The audio quality is
positioned.
poor after connection
with a Bluetoothenabled device.
The Bluetooth reception is poor.
a
The Bluetooth function of the
device is not enabled.
Use another device to connect.
Italiano
Cannot pair the
Bluetooth enabled
device with the car
audio system.
Cause
The device does not support the
profiles required for the system.
.u
Problem
Español
Sound skips or is
noisy.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Connectors are loose.
Français
The USB device is damaged.
USB device is not
recognized.
English
USB devices
23
FM tuner
Mid: 650 mV (at 2 V output)
Low: 1.3 V (at 2 V output)
(input impedance 10 kΩ or greater)
Aux-in level: ≤2 V
General
Español
USB
Specification: USB 1.0/2.0
Playable audio format:
MP3 (.mp3): MPEG 1/2/Audio Layer-3
WMA (.wma): Ver 7/8/9.1/9.2
English
Bluetooth
Specification: Bluetooth Ver. 2.0
Profile: HSP (Headset Profile)
OPP (Object Push Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (AV Remote Control Profile)
Send/Receive Sensitivity: Class 2
7″ (178 mm)
6 2/3″ (170 mm)
7 2/5″ (188 mm)
6 2/5″ (163 mm)
English
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO 9660 level 1, 2
Joliet or Romeo file system
1/2″ (12 mm)
MP3/WMA mode
7 12/25″ (190 mm)
Italiano
System: Disc digital audio system
Frequency response: 20 Hz-20 kHz
Signal/noise ratio: >80 dB
Total harmonic distortion: Less than 0.1% (1 kHz)
Channel separation: >60 dB
a
CD
co
m
English
Frequency range: 530-1710 kHz
Usable sensitivity (S/N=20 dB): 30 dBμ
Power supply voltage:
14.4 VDC (10.8 to 15.6 V allowable), negative
ground
Pre-Amp output voltage:
4.0 V (CD play mode: 1 kHz, 0 dB, 10 kΩ load)
Fuse: 15 A
Dimensions of the main unit (W × H × D):
7 2/5 × 2 7/25 × 7 12/25 in.
(188 × 58 × 190 mm)
Weight of the main unit: 3.2 lb. (1.44 kg)
Dimensions of the remote control unit (W × H × D):
1 2/3 × 2/5 × 4 2/5 in.
(43 × 11 × 113 mm)
Weight of the remote control unit:
1.16 oz. (36 g) (including battery)
.u
AM tuner
0.
Français
Frequency range: 87.9-107.9 MHz
Usable sensitivity: 8 dBμ
Frequency response: 30 Hz-15 kHz
Stereo separation: 30 dB (1 kHz)
Signal/noise ratio: >55 dB
13
English
English
English
24
8. SPECIFICATIONS
Notes:
Input
Audio input sensitivity:
High: 320 mV (at 2 V output)
(50 mm)
1 4/5″ (46 mm)
2 7/25″ (58 mm)
• Specifications comply with JEITA
Standards.
• Specifications and design are subject
to change without notice for further
improvement.
Audio amplifier
Maximum power output:
200 W (50 W × 4)
Speaker impedance: 4 Ω (4 to 8 Ω allowable)
2″
Power output:
19 W × 4 Channels RMS
(4 Ω at 14.4 V≤1% THD+N)
Signal to noise ratio:
80 dBA (reference: 1 W into 4 Ω)
Autogood products Internet store “130”
CONTENTS
0.
13
a
Figure 1
3) General Cautions
2.Use a soft, dry cloth to clean the case.
Never use a rough cloth, thinner,
benzine, or alcohol. For tough dirt,
apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
Español
1.Do not open the case. There are no
user- serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
Español
Wire connector..................................... 1
Remote control unit (with battery)......... 1
Owner’s manual.................................... 1
Warranty card....................................... 1
Microphone........................................... 1
DCP case............................................. 1
Español
Source unit............................................ 1
Front panel............................................ 1
Trim ring................................................ 1
Mounting bracket.................................. 1
Screw M5x6 mm................................... 4
L-key..................................................... 2
Car battery
Español
2) Package Contents
co
m
.u
Italiano
1.This set is exclusively for use in cars with a
negative ground 12 V power supply.
2.Read these instructions carefully.
3.Be sure to disconnect the battery terminal before
starting. This is to prevent short circuits during
installation. (Figure 1)
Español
1) Before Starting
Français
1) Before Starting........................................................................ 25
2) Package Contents.................................................................. 25
3) General Cautions.................................................................... 25
4) Cautions on Installation........................................................... 26
5) Installing the Source Unit........................................................ 26
6) Removing the Source Unit...................................................... 28
7) Wiring and Connections.......................................................... 29
8) Connecting the Accessories................................................... 30
English
9. INSTALLATION/WIRE CONNECTION
GUIDE
Español
Autogood products Internet store “130”
25
English
4) Cautions on Installation
Français
1.Prepare all articles necessary for
installing the source unit before
starting.
2.Install the unit within 30° of horizontal.
(Figure 2)
3.If you have to do any work on the car
body, such as drilling holes, consult
your car dealer beforehand.
4.Use the enclosed screws for
installation. Using other screws can
cause damage. (Figure 3)
English
Chassis
Chassis
Damage
Max 30°
Figure 3
Notes:
1.Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2.Fasten the front stopper securely to prevent the source unit from coming loose.
English
7 3/16″
(182 mm)
Hole
2 1/8″
English
• Console opening dimensions
53 mm
Español
1.Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the universal mounting bracket inward, then secure the stopper.
2.Wire as shown in Section 7.
3.Insert the source unit into the mounting bracket until it locks.
4.Carefully adjust all mounting tabs on the mounting bracket and confirm that the
mounting tabs are securely attached.
0.
English
co
m
5) Installing the Source Unit
.u
Figure 2
13
Italiano
a
Max. 6 mm (M5 screw)
English
26
Autogood products Internet store “130”
6. To prevent electric spark, connect the
positive pole first and then the negative
pole.
7. DO NOT block the cooling fan exit to
ensure sufficient heating dissipation of this
unit, or it may result in damage to this unit.
Unit installation
Español
a
.u
co
m
0.
Español
13
Italiano
Screwdriver
Dashboard
Español
Method A
1. Insert mounting bracket into dash
board, choose appropriate mounting tab
according to the gap width, bending the
mounting tab outwards with a screwdriver
to fix the mounting bracket in place.
2. Slide the unit into the bracket until you hear
a click sound.
Français
1. Before installation, please make sure that
all connections have been properly made
and the unit operates normally. Improper
connection may result in damage to the
unit.
2. Use only accessories designed and
manufactured for this unit. The use of other
unauthorized accessories may result in
damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit where it will be
exposed to heat to prevent damage to
electrical components such as the laser
head.
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in degraded performance.
English
Notes on installation
Mounting bracket
Español
Español
Español
Autogood products Internet store “130”
27
6) Removing the Source Unit
Method B
English
Disassemble trim ring
1. Push the trim ring upward and pull out the
upper part.
Français
M5×6
English
2. Push the trim ring downward and pull out
the lower part.
English
Attach the trim ring around the front panel.
13
Español
0.
Trim ring installation
English
.u
1. Insert this unit directly to the opening of the
dashboard.
2. Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
a
Dashboard
co
m
Italiano
Mounting frame
Disassemble the unit
1. Switch off the power.
2. Remove the panel.
3. Remove the trim ring.
4. Insert the removal keys straight back until
they lock, then pull the unit out.
5. Disconnect all the wires.
English
English
28
Autogood products Internet store “130”
Purple
Subwoofer output 2
White
Gray
Black
Black
Black
Italiano
Black
Microphone
a
MIC
4-channel amplifier
Steering wheel
control terminal
0.
Refer to the next page.
Español
SAT BUS
13
SAT L (White)
SAT R (Red)
Español
XM
RADIO
CCUXM1
CNP2000UC
(Black)
HD BUS
ANTENNA
HD RADIO
Español
(Black)
Español
co
m
.u
USB connector
(Black)
Español
Red
Black
Français
Left
Right
Purple
SWC
Front audio
output terminal
Black
Red
SUB OUT 2
Left
Right
Subwoofer output 1
SUB OUT 1
Rear audio
output terminal
White
English
7) Wiring and Connections
THD300
Español
Autogood products Internet store “130”
29
English
16-pin connector extension lead
(attached to the source unit)
Gray
Front right
Front left
White/Black
Purple
Front right
Front left
Green/Black
Connect to remote turn-on lead of amplifier
White
White/Black
Purple
English
Green
Not used.
Insulate each wire
Connect to vehicle chassis ground
Orange/White wire (Illumination lead)
0.
Español
Front left
Gray/Black
13
English
Front right
Gray
Black wire (Ground lead)
Purple/Black
English
English
30
Blue/White wire (Amplifier turn-on lead)
or
2-speaker system
12 V
a
Italiano
4-speaker system
Red wire (Power lead)
Accessory
.u
English
Purple/Black
Green
Yellow wire (Memory back-up lead)
Connect directly to battery
co
m
Français
Gray/Black
White
Connect it to the car power supply terminal
for illumination
Blue wire (Auto antenna lead)
Connect it to the car power supply terminal
for antenna
Green/Black
8) Connecting the Accessories
• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
Autogood products Internet store “130”
a
.u
co
m
0.
13
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2010: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
PN:127075002415
Autogood products Internet store “130”