Motorola CLEARTONE CM5000 User guide

When printed by Motorola
Cleartone CM5000
TETRA Mobile Repeater/Gateway
Feature User Guide
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Computer Software Copyrights . . . . . . . . . . . . . . . . . . . . . . . .
Product Specific Information . . . . . . . . . . . . . . . . . . . . . . . . . .
Disposal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
2
3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
How to Use this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Powering On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Powering On with Emergency Button . . . . . . . . . . . . . . . . . . .
Powering On with Transmit Inhibit Active . . . . . . . . . . . . . . . .
Unlocking the CM5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Looking After Your CM5000 . . . . . . . . . . . . . . . . . . . . . . . . . .
The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Home (Idle) Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The LED Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key, Rotary Knob, and Button Overview . . . . . . . . . . . . . . . . .
Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rotary Knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emergency Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aliases (Names) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting TMO or DMO Operation . . . . . . . . . . . . . . . . . . . . .
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering TMO or DMO . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TMO Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DMO Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Gateway or Repeater Mode Operation . . . . . . . . . .
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Gateway Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
6
6
7
7
7
8
8
8
9
10
10
10
10
11
11
11
11
12
12
12
13
13
13
13
14
6866539D54-A
Contents
Contents
Entering Repeater Mode . . . . . . . . . . . . . . . . . . . . . . . . . .
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
15
15
Trunked Mode Operation - TMO . . . . . . . . . . . . . . . . .
16
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Folder Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Alphabetic Search . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
“My Groups” Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding/Deleting Groups from My Groups . . . . . . . . . . . . .
Activating/deactivating Scanning . . . . . . . . . . . . . . . . . . . . . .
Making a Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transmit Inhibit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
17
17
17
17
17
18
18
18
18
19
19
Direct Mode Operation - DMO . . . . . . . . . . . . . . . . . . .
20
DMO Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
“My Groups” Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding/Deleting Groups from the My Groups Folder . . . . .
Selecting a Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gateway/Repeater Selection . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting DMO Group Call MS to MS . . . . . . . . . . . . . . . .
Selecting DMO Group Call via Gateway . . . . . . . . . . . . . .
Selecting DMO Group Call via Repeater . . . . . . . . . . . . . .
Selecting DMO Group Call via Gateway and Repeater . . .
Making Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
20
20
20
21
21
21
22
22
22
23
23
Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making Semi-Duplex Private Call . . . . . . . . . . . . . . . . . . . . . .
Receiving Semi-Duplex Private Call . . . . . . . . . . . . . . . . . . . .
Making Full-Duplex Private Call . . . . . . . . . . . . . . . . . . . . . . .
Receiving Full-Duplex Private Call . . . . . . . . . . . . . . . . . . . . .
24
24
25
25
25
Phone and PABX Calls . . . . . . . . . . . . . . . . . . . . . . . . .
26
ii
26
26
27
Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . . .
28
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exiting Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving Emergency Call . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
28
29
30
GPS Location Service . . . . . . . . . . . . . . . . . . . . . . . . .
31
Enhancing GPS Performance . . . . . . . . . . . . . . . . . . . . . . . . .
GPS Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPS Enable/Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering GPS Location Service . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Your Position . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
33
33
33
34
The Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
To Enter the Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Return to the Previous Level . . . . . . . . . . . . . . . . . . . . . . .
To Exit the Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PIN Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Ring Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
36
36
37
38
39
39
39
39
40
41
41
41
42
42
43
43
44
45
45
45
iii
Contents
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Phone or PABX Call . . . . . . . . . . . . . . . . . . . . . . . .
Answering a Phone or PABX Call . . . . . . . . . . . . . . . . . . . . . .
Setting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Display’s Working Language . . . . . . . . . . . . . .
Setting Group Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
More... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Group Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Group Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Personal Information . . . . . . . . . . . . . . . . . . . . . .
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46
46
47
47
49
51
51
51
51
54
55
55
56
57
60
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering the Messages Sub-menu . . . . . . . . . . . . . . . . . . . . .
Creating a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending the Message . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inbox Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering the Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reading a Message in the Inbox . . . . . . . . . . . . . . . . . . . .
New Message Received . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Defined Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Predefined Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending a Predefined Template . . . . . . . . . . . . . . . . . . . . .
Sending a Status Message . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
62
62
63
63
64
64
64
64
65
66
66
67
67
Writing Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
Selecting the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . .
Adding Secondary to the List of Text Entry Modes . . . . . . . . .
Selecting the Text Entry Method and Language . . . . . . . . . . .
Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TAP Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iTAP Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
69
69
70
70
71
iv
71
75
75
76
76
76
76
What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TETRA/UHF Analogue Gateway Mode . . . . . . . . . . . .
77
82
85
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering TETRA/UHF Analogue Gateway Mode . . . . . . . . . .
Exiting TETRA/UHF Analogue Gateway Operation . . . . . . . .
85
85
86
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . .
87
91
For technical support on this product call the helpdesk on
0044 1256 484433 during normal office hours.
In case of a defect device please contact your local dealer.
v
Contents
Keys Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing in iTAP Alphanumeric . . . . . . . . . . . . . . . . . . . . . . . . .
Word Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing in Numeric Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing in Symbol Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing in TAP Alphanumeric . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Words to the Dictionary . . . . . . . . . . . . . . . . . . . . . . . .
vi
General Information
• This terminal meets the applicable safety standards if used
as prescribed. All operating and safety instructions are to
be followed carefully.
CAUTION: Before using this product, read the operating
!
instructions for safe usage contained in the Product Safety
and RF Exposure booklet (Motorola Publication part number
6866537D37 for Europe, Middle East and Africa) enclosed
with your terminal.
• Motorola recommends the usage of Motorola approved
accessories only.
• Only specialized workshops should be contacted for
installation, maintenance and repair work.
• Keep this User Guide and the Product Safety and RF
Exposure booklet in a safe place and make it available to
other operators, and in case, that the terminal is passed on
to other people.
Copyright Information
© Motorola Inc., 2007
MOTOROLA and the Stylized M Logo are registered in the
U.S. Patent and Trademark Office. All other product or
service names are the property of their respective owners.
No part of this manual may be reproduced, transmitted,
stored in a retrieval system, or translated into any language
or computer language, in any form or by any means, without
the prior written permission of Motorola Inc.
Computer Software Copyrights
The Motorola products described in this manual may include
copyrighted Motorola computer programs stored in
semiconductor memories or other media. Laws in the United
1
Safety
Safety Information
States and other countries preserve for Motorola certain
exclusive rights for copyrighted computer programs including,
but not limited to, the exclusive right to copy or reproduce in
any form the copyrighted computer program. Accordingly,
any copyrighted Motorola computer programs contained in
the Motorola products described in this manual may not be
copied, reproduced, modified, reverse-engineered, or
distributed in any manner without the express written
permission of Motorola. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly
or by implication, estoppel, or otherwise, any license under
the copyrights, patents or patent applications of Motorola,
except for the normal non-exclusive license to use that arises
by operation of law in the sale of a product.
Product Specific Information
•
Max RF Power
3 Watts
•
Max. Speaker Load
10 Watts at 4 Ohms
•
Antenna Impedance
50 Ohms
•
Ambient Temperature Range
- 20 °C to + 60 °C
WARNING: If the terminal is in service the surface
temperature can rise up to 70 °C.
Do not touch the hot surface
!
•
Operating Time
Continuous / Intermittent
NOTE: In general, the terminal transmit and receive
time (operating cycle time) is determined by the
communication system. On overload, respectively on
extensive use beyond the systems specifications at
high ambient temperatures, the terminal is protected by
its thermal control, which cuts down the RF output
power, thus reducing the terminal coverage range.
2
Disposal Information
The European Union's WEEE directive requires that
products sold into EU countries must have the
crossed out trashbin label on the product (or the
package in some cases). As defined by the WEEE
directive, this cross-out trashbin label means that
customers and end-users in EU countries should not dispose
of electronic and electrical equipment or accessories in
household waste.
Customers or end-users in EU countries should contact their
local equipment supplier representative or service
centre for information about the waste collection system in
their country.
3
Safety
European Union (EU) Waste of Electrical and Electronic
Equipment (WEEE) Directive
Getting Started
This manual contains everything you need to know about
how to operate your CM5000 Repeater. If you have any
questions regarding the operation and care of this mobile
device please contact your local dealer.
You can display different languages on your mobile, for more
information please refer to the relevant section in this
handbook.
How to Use this Guide
This guide describes the CM5000 features that are set up
and pre-programmed at the factory.
Your Service Provider or your organisation may have
customised your CM5000 to optimise its use for your
individual needs. Check with your Service Provider or
organisation to find out the differences from this guide.
Throughout the text in this publication, you will notice the
following special notations used to highlight certain
information or items:
Example
or Select
More... > Networks >
TXI Mode > Activate
Contacts
On
Status Delivered
<User Defined>
Description
Key presses are shown as a key symbol
or in bold print for soft key functions.
Indicates navigation in menu items.
Highlighted text indicates the selection.
Indicates the active setting.
Information appearing on the CM5000
display is shown in special print.
Indicates a prompt or message
configured by your Service Provider.
A Note contains additional information
which is relevant to the item feature.
4
Controls and Indicators
1
4
5
11
6
3
7
8
10
9
Getting Started
3
2
Item
Description
1
Rotary Knob
Used to turn the radio ON/OFF and to adjust volume level.
2
Microphone Connector
Used to connect a fist microphone in to.
3
Soft Key(s)
Used to select the option that is shown on the display.
4
Menu Key
Used to enter the main menu.
5
Emergency Key
Used to send Emergency Alarms.
5
Item
Description
6
Navigation Keys
Used for scrolling or text editing.
7
Enter Key
Used to select the required item.
8
Clear Key
Used to clear character or back to the previous screen.
9
Alphanumeric Key
Used to enter alphanumeric characters for dialing,
address book entries and text messages.
10
On Hook / Off Hook Key
Used to initiate or answer calls, end calls or send status
and text messages.
11
LED
Used to indicate the states of the CM5000.
Powering On/Off
To power on:
• Press and hold Rotary Knob.
• If the CM5000 is configured with ignition sense, the radio
will automatically turn on whenever the vehicle ignition is
turned on.
Your CM5000 performs a self-check and registration routine.
After successful registration, the CM5000 will be in service.
The display shows Idle screen.
To power off:
• Press and hold Rotary Knob.
• If the radio is powered on via the ignition, it can be turned
off via the ignition.
You will see the Powering Off message.
Powering On with Emergency Button
Press and hold the Emergency button to power On.
6
The CM5000 will power On in Emergency Operation or in
standard mode (as programmed).
The terminal powers On and Off without visible and audible
notification if Silent Emergency Mode is activated.
Transmit Inhibit (TXI) is a feature allowing you to switch off
transmission before entering a Radio-Frequency (RF)
sensitive area. To activate this feature, press the Menu
button and select More > Networks > TXI Mode > Activate.
WARNING: Pressing the Emergency button, even if Transmit
!
Inhibit is activated, causes the CM5000 to transmit immediately.
The CM5000 must NOT be within the RF sensitive area when
entering Emergency Operation.
Press the Yes key to deactivate the TXI Mode. If the CM5000
was previously used in Trunked Mode, it will register to the
network. If the CM5000 was previously used in Direct Mode,
it will remain in Direct Mode.
Press No in Trunked Mode and the CM5000 powers down.
Press No in Direct Mode and you remain in Direct Mode with
TXI selected.
Unlocking the CM5000
Your CM5000 may be locked at power up.
To unlock the CM5000 after powering on, enter the code at
the prompt. The CM5000 enters the default Home display.
The unlock code is originally set to 0000. Your Service
Provider may change this number before you receive your
terminal.
Selecting Your Network
Before you start operating your CM5000, you can select the
network you want your CM5000 to be registered to. For
detailed information, see “Networks” on page 57.
7
Getting Started
Powering On with Transmit Inhibit Active
Looking After Your CM5000
To clean your CM5000, use a moistened or antistatic cloth.
DO NOT use a dry or electrostatically charged cloth.
The Display
Home (Idle) Display
A powered-on, idle terminal shows the following typical
Home display:
Trunked Mode Home Display
status icon area
soft key area
menu/context sensitive icon
soft key area
text display area
Direct Mode Home Display
status icon area
soft key area
menu/context sensitive icon
soft key area
text display area
8
Screen Icons
Status icons appear when your phone is engaged in certain
activities or when you have activated certain features.
Icon
Description
Getting Started
Signal Strength
Indicates the signal strength in the current TMO or
DMO area. Four bars indicate the maximum
strength. Fewer bars indicate lower signal strength.
You may be able to improve signal strength by
moving your vehicle to a different location.
New Message Has Arrived
Indicates that a new message just arrived. Once you
change the display the icon disappears.
New Message(s) in Inbox
Indicates that an unread message is in stack. Once
you read the message the icon disappears.
All Tones Off
No audible alert tones. The screen displays incoming
calls.
No Speaker
Indicates no speaker output.
GPS
Appears when the CM5000 receives the GPS signal.
Data Connected
Appears when the CM5000 is in Packet Data Mode.
Emergency
Appears when the CM5000 is in Emergency mode.
Scan
Appears when the CM5000 is in Group scan mode.
Direct Mode (DMO)
Appears when the CM5000 is in Direct Mode.
Gateway Mode
Indicates in-service state for Gateway Mode.
Indicates CM5000 fixed communication through
Gateway.
9
Icon
Description
Repeater Mode
Indicates in-service state for Repeater Mode.
Indicates CM5000 fixed communication through
Repeater.
The LED Status Indicator
The LED indicator shows the in-service states of your
CM5000. Please refer to the table below.
Indicator
Status
Solid GREEN
In use
Blinking GREEN
In service
Solid RED
Out of service / Disabled
Blinking RED
Connecting to a network
Solid ORANGE
Transmission Inhibit (TXI) in service
Blinking ORANGE
Incoming call
No indication
Switched off
Key, Rotary Knob, and Button Overview
Soft Keys
Press upper or lower
to select the
option that appears in the screen
directly next to the upper or lower soft
key. In this example, Contcs is
displayed next to the key.
Pressing
enters the contact list. In the user guide, this
action is described as “press Contcs”.
Menu Button
Press the Menu button to enter:
• The menu (when there is no on-going activity). The
CM5000 menus allow you to control your CM5000
settings. Menus are organised in a hierarchy. See “List of
10
Menu Items” on page 38. The menu options provide
access to a further list of options called a sub-menu.
• The context sensitive menu (when
icon is on) to view
a list of items for the current menu.
Rotary Knob
Emergency Button
Press and hold this button to enter Emergency Operation.
When the CM5000 is powered down, press and hold this
button to power On in Emergency Operation (if configured by
your Service Provider).See “Emergency Operation” on
page 28.
Aliases (Names)
Aliases are optional names that you can assign to stored
phone and private numbers (or IDs). To edit an alias, see
page 40.
Aliases can be up to 12 characters in length and may consist
of letters, numbers, and spaces.
Aliases are displayed during contact list scrolling or during an
incoming call. Aliases are also used in alphanumeric search
to retrieve numbers from your memory list.
Screen Saver
If your Service Provider configured this feature, the screen
saver will automatically cover the CM5000 display after the
CM5000 stays idle for a pre-programmed period of time. If
you press a key or a call arrives, the screen saver is
deactivated and the CM5000 resumes standard operation.
The screen saver consists of a logo and an alphanumeric
text. Check in the menu options whether the Service Provider
11
Getting Started
The rotary knob is used for powering on and off your CM5000
and also as a volume control. Turn clockwise to increase the
audio volume level.
has given you the capability of entering your own screen
saver text (see page 49).
Selecting TMO or DMO Operation
General
In Trunked Mode Operation (TMO) the CM5000 is used with
the infrastructure services within system coverage.
In Direct Mode Operation (DMO) the CM5000 is used without
infrastructure services required.
While operating in DMO the propagation travels directly from the
transmitting terminal antenna to the receiving terminal antenna, with
no assistance from any base station or tower. Therefore, the range is
critically dependent on the position of the user and the antenna. To
achieve best results, hold the terminal in the hand as high as
comfortably possible, and be sure not to obstruct the antenna in any
way. Be sure that the antenna is clear from the body, cables, or other
obstructions. As there is no tower-mounted base station to assist,
and the two users are usually standing at ground level, the range is
usually shorter than that can be achieved towards a tower or hilltop.
Any obstructions (hills, buildings, etc.) between the users will further
decrease the range. Conversely, raising the terminal higher or
moving to a higher location may improve the range.
A CM5000 in DMO can communicate with the trunked
system (and vice-versa) through a gateway device. To use
that feature, please enable the gateway option in your
CM5000 (see CommType“Gateway/Repeater Selection” on
page 21).
In DMO it is only possible to place Group Calls, Emergency Group
Calls and Private Half-duplex Calls.
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• From the Home display press Optns and select Direct
Mode if the CM5000 is in TMO.
• From the Home display press Optns and select Trunked
Mode if the CM5000 is in DMO.
12
• Press the Menu button and select More... > Networks >
Trunked Mode if the CM5000 is in DMO.
• Press the Menu button and select More... > Networks >
Direct Mode if the CM5000 is in TMO.
TMO Calls
You can make and receive the following types of calls when
the CM5000 operates in Trunked Mode:
•
•
•
•
•
Group Calls
Private Calls
Phone Calls
PABX Calls — local (office) extension calls
Emergency Calls
DMO Calls
You can make and receive Group Calls when the CM5000
operates in Direct Mode (DMO). This includes Emergency
Group Calls.
The CM5000 returns to the Home display when there is no
activity for a few seconds.
Selecting Gateway or Repeater Mode Operation
General
In Gateway Mode Operation communication relay between
TMO and DMO is available. DMO terminals communicate
with the trunked system (and vice-versa).
In Repeater Mode Operation the CM5000 re-transmits
information received from one DMO terminal to other DMO
terminal enhancing coverage area.
13
Getting Started
Your terminal can alert you of an incoming call. Select the alert
settings in the Tones menu items.
Entering Gateway Mode
When your CM5000 is in TMO
enter Gateway Mode in one of
the following ways:
• From the Home display press
Optns and select Gateway
Mode.
• Press the Menu button and
select More... > Networks > Gateway Mode.
The display shows Gateway
Monitor. In Gateway Monitor
Mode CM5000 checks if the
communication goes through
other gateway or not.
• When it does not pick up other
gateway communication, it
switches to Gateway Mode.
• When it detects other gateway
communication during
Gateway Monitor mode. The
display shows Gateway
Detected message. The radio
is in Temporary DMO. It
checks other gateway
communication all the time. If other gateway
communication disappears, CM5000 returns to Gateway
Monitor Mode.
Press Exit in Temporary DMO to switch to DMO.
Entering Repeater Mode
When your CM5000 is in TMO
enter Repeater Mode in one of
the following ways:
• From the Home display press
Optns and select Repeater
Mode as required.
14
• Press the Menu button and select More... > Networks >
Repeater Mode.
Making Calls
See the relevant sections in the user guide.
The CM5000 will automatically receive the incoming call.
Additionally, if Inactivity Revert Mode is enabled, the CM5000
returns automatically to the Home display, after that call
ends.
Inactivity Revert Mode will occur if configured by your Service
Provider.
Your CM5000 will alert you of an incoming call depending on
the setting you selected in the Tones menu option (see
page 47).
During message editing, you will be alerted of an incoming
Group/Emergency/Broadcast Group Call if configured by
your Service Provider.
15
Getting Started
Receiving Calls
Trunked Mode Operation - TMO
General
A Group Call is an instant communication between you and
others in a talkgroup that you select. Participants may join
(late entry) and leave an on-going Group Call. A talkgroup is
a pre-defined set of subscribers enabled to participate in and/
or invoke a Group Call, that is set up by your Service
Provider.
Talkgroups appear on your display as names or numbers (for
example: Sales, Service, Electricians, Talkgrp10).
Talkgroups are divided into folders. Each folder may contain
several talkgroups.
For ease of use, your CM5000 also provides the ability to:
• Perform an alphabetical search of the talkgroup aliases.
Scroll through the entire talkgroup list.
• Organise your favourite groups into one folder called My
Groups (set up by your Service Provider).
Your talkgroups may be organized into scan lists (set up by
your Service Provider, or by yourself through the Menu).
When you activate one of these scan lists, your CM5000 will
continuously monitor the activities of the selected talkgroups.
By assigning priorities to the talkgroups defined in the scan
list, you will be capable of accepting calls that have higher
priority than the on-going call.
You can start talkgroup, folder, or scanning selection when
the terminal is idle or receiving a call.
When receiving a call, choose one of the following:
• Exit selection screen to join the call.
• Join the call from the selection screen by pressing PTT.
• Continue selection.
16
Selecting a Group
You can select a talkgroup in one of the following ways, by
using the:
• folder search.
• alphabetical search feature.
• index.
Using Folder Search
TMO Group Call
From the Home display, press
Optns. Select a group by folder
search (“TG by Folder”). Select
the folder and select the group.
Using Alphabetic Search
From the Home display, press
Optns. Select a group by
alphabetic search (“TG by abc”).
Enter the first character of the
group’s name. Select the group.
Using Index
From the Home display, press
Optns. Select a group by folder
search (“TG by Index”). Select
the folder and select the group.
Selecting a Folder
From the Home display, press
Optns. Select Folder, and select
the desired folder. The display
shows the last selected group in
that folder.
17
“My Groups” Folder
You can organise your favourite groups into one folder called
“My Groups”.
Adding/Deleting Groups from My Groups
For more information, see “My Groups” on page 54.
Activating/deactivating Scanning
See “Group Scan” on page 51.
Making a Group Call
1. From the Home display and if this is the required group,
press and hold the PTT.
2. Wait for the talk permit tone (if configured) and then speak
into the microphone. Release the PTT button to listen.
Group Folder name
Group name
When you start a call, all members of the selected group who
have their units turned on, will receive the Group Call.
The “No Group” message is displayed when you are out of the
normal coverage area of your selected group. You must then select
a new group that is valid for your working location.
18
Receiving Group Call
When an Group call is received the mobile will automatically
go into group mode and receive the call, also the group caller
name will appear in the screen.
Calling Party ID number
Transmit Inhibit
You can activate the Transmit Inhibit (TXI) Mode before
entering RF sensitive areas, e.g. in hospitals or in potentially
explosive areas, where safety can be jeopardized due to
CM5000 transmission radiation.
Radiation of the CM5000 is only suppressed if the TXI Mode is
activated or the CM5000 is separated from power supply.
In TXI Mode the CM5000 will not transmit under any
circumstances, except for the Emergency Call, which can be
initiated even if the CM5000 is in TXI Mode.
All CM5000 functions and keys which cause transmission,
e.g. registration to the network, change of talkgroup or folder,
sending messages, pressing PTT, etc. are disabled.
When no danger to safety exists anymore (for instance if you
leave the RF sensitive area), the TXI Mode can be
deactivated and the CM5000 returns to standard operation.
19
TMO Group Call
Group name
Direct Mode Operation - DMO
DMO Group Call
In DMO, the CM5000 can be used without your Service
Provider’s infrastructure. Direct Mode (DMO) allows
communication with other terminals also operating in Direct
Mode, which are on the same frequency and talkgroup as
your CM5000.
You can receive a call:
• From the selected talkgroup
• From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI (Mobile
Network identity) call.
• From an open group. (An open group is a super-group to
which all DMO groups belong.)
When you start a call, the members of the selected talkgroup
who have their units turned on, and are within the group
subscriber identity (as configured by the Service Provider),
will receive the transmission.
If Transmit Inhibit is activated while the terminal is set to
DMO, the PTT is disabled. You can only listen. For detailed
information on Transmit Inhibit, see page 19. DMO Talkgroup
selection is allowed when Transmit Inhibit is activated.
“My Groups” Folder
You can organise your favourite groups into one folder called
“My Groups”.
Adding/Deleting Groups from the My Groups Folder
For more information, see “My Groups” on page 54.
Selecting a Group
See “Selecting a Group” on page 17.
20
Selecting a Folder
See “Selecting a Folder” on page 17.
Gateway/Repeater Selection
Use the DMO Config sub-menu for setting the Gateway and
Repeater options.
1. Press Optns to enter the options menu in DMO.
DMO Options sub-menu
Option (TMO)
DMO Group Call
Folder
TG by Folder
TG by abc
Trunked Mode
Comm Type
Direct
Via Gateway
Via Repeater
All
2. Scroll to Comm Type, and
press Select.
Selecting DMO Group Call MS to MS
To change from gateway or repeater mode to MS - MS mode
(DMO terminal to terminal call):
1. Press Optns, scroll to Comm
Type and press Select.
2. Scroll to Direct and press
Select.
Your CM5000 communicates
directly among DMO terminals.
21
Selecting DMO Group Call via Gateway
While in DMO, proceed as follows to choose a gateway to set
up a call via Gateway for the selected talkgroup:
1. Press Optns, scroll to Comm Type and press Select.
2. Scroll to Via Gateway and press Select.
Your CM5000 communicates through Gateway only.
Selecting DMO Group Call via Repeater
While in DMO, proceed as follows to choose the Repeater
option to set up a call via Repeater for the selected talkgroup:
1. Press Optns, scroll to Comm Type and press Select.
2. Scroll to Via Repeater and press Select.
Your CM5000 communicates through Repeater only.
Selecting DMO Group Call via Gateway and Repeater
While in DMO, proceed as follows to choose the Gateway
and Repeater option to set up a call via Gateway or Repeater
for the selected talkgroup.
1. Press Optns, scroll to Comm Type and press Select.
2. Scroll to All and press Select.
The CM5000 automatically adjusts communication type to a
mode depending on a Gateway or Repeater signal presence.
If no signal presence is detected, the terminal switches to MS
- MS communication.
22
Making Group Call
Select the group from Talkgroup list you require. Press PTT
button and wait for the grant tone before speaking into the
microphone remembering to release the PTT to listen.
Group Folder name
Group name
When an Group call is received the mobile will automatically
go into group mode and receive the call, also the group caller
name will appear in the screen.
Calling Party ID number
Group name
23
DMO Group Call
Receiving Group Call
Private Call
General
A Private Call, also called Point-to-Point or individual call, is a
call between two individuals. No other terminal can hear the
conversation.
If your Service Provider has restricted access to the Contacts list, it
might not be possible to create a new contact, edit existing contacts
or dial up a number which is not in the Contacts list.
For operating the CM5000 in RF sensitive areas, see
“Transmit Inhibit” on page 19.
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but it is not possible to answer the call.
Making Semi-Duplex Private Call
1. From the Home display select Private Mode using right/left
navigation keys.
2. When in Private Mode, dial a number and select Ok.
3. Press and hold the PTT button. Wait for the talk permit tone
(if configured) before talking, and release the PTT when
listening.
4. To end the call press On Hook key.
Called ID Number
24
Private In Use:
Call set-up procedure is completed
Terminal is in Traffic mode
Receiving Semi-Duplex Private Call
1. The CM5000 switches to the incoming Private Call. The
display shows incoming call notification and the caller’s
identity.
2. To answer an incoming call, press PTT.
3. To reject or end the call, press On Hook key.
1. From the Home display select Private Mode using right/left
navigation keys.
2. When in Private Mode, dial a number and select Ok.
3. Press Off Hook key to start the call.
4. To end the call press On Hook key.
Receiving Full-Duplex Private Call
1. The CM5000 switches to the incoming Private Call. The
display shows incoming call notification and the caller’s
identity.
2. To answer an incoming call, press Off Hook key.
3. To reject or end the call, press On Hook key.
25
Private Call
Making Full-Duplex Private Call
Phone and PABX Calls
General
The Phone Call allows you to call a landline telephone
number or a cellular mobile phone number. The Private
Automatic Branch Exchange (PABX) Call allows you to
call local office extension numbers (if programmed by your
service provider). This type of call needs to be activated by
your Service Provider.
In this publication we use “phone number” when referring to
these numbers.
Both calls have the same dialing features.
For operating the CM5000 in RF sensitive areas, see
“Transmit Inhibit” on page 19.
While Transmit Inhibit is activated, an incoming Phone or PABX Call
is indicated, but it is not possible to answer the call.
If your Service Provider has restricted access to the Contacts list, it
might not be possible to create a new contact, edit existing contacts
or dial up a number which is not in the Contacts list.
Making a Phone or PABX Call
1. From the Home display select Phone or PABX Mode using
right/left navigation keys.
2. When in Phone or PABX, select a pre-programmed number
from the contact book or dial a number.
26
3. Press and release Off Hook key. You will hear a ringing
tone. Wait for the called person to answer your call.
4. To end the call, press On Hook key.
Answering a Phone or PABX Call
1. The CM5000 switches to the incoming Phone/PABX Call
and starts ringing.
2. To answer the incoming call, press Off Hook key.
3. To reject or end the call, press On Hook key.
Phone and PABX Call
27
Emergency Operation
General
Emergency Operation is available in TMO and in DMO, if the
CM5000 is in service.
Emergency Mode indication (alert tones) can be disabled by
your Service Provider.
Pressing the Emergency button even if Transmit Inhibit is activated
causes immediately the CM5000 to transmit. When entering
Emergency Operation the CM5000 should not be within the RF
sensitive area any longer!
Entering Emergency Mode
The terminal will enter Emergency Mode when you press
and hold the Emergency button.
The Emergency Mode allows you to use the PTT to transmit
with Emergency priority (by either initiating an Emergency
Group Call or requesting emergency transmit priority).
After entering Emergency Mode, your CM5000 automatically
sends an Emergency Call to predefined address and activate
Hot Microphone (if configured).
Hot Mic (Hot Microphone) allows you to talk without pressing
the PTT. Pressing PTT during Hot Mic ends Hot Mic
transmission. If Hot Mic is disabled, then use PTT to talk.
Each time you press and hold the Emergency button, the
terminal sends an Emergency Call with Hot Mic emergency
function again.
28
Upon entry into Emergency Mode any existing call or service
other than packet data service will be aborted or cleared
down.
Emergency Operation
In Emergency Mode, the terminal will automatically reject
Phone, PABX and Private Calls, and will not monitor the
groups in the user selected scan list.
Exiting Emergency Mode
The terminal exits Emergency Mode and switches to the
Home display:
• If you press and hold the Exit soft key during an
Emergency Group Call.
• If the infrastructure ends the Emergency Group Call.
29
Receiving Emergency Call
When the CM5000 receives
Emergency Call, the display will
show Emgcy In Use and
switches to Emergency Mode
automatically.
30
GPS Location Service
Your terminal’s GPS Location feature uses information from
Global Positioning System (GPS) satellites orbiting the earth
to determine the approximate geographical location of your
terminal. The availability and accuracy of this location
information (and the amount of time that it takes to calculate
it) will vary depending on the environment in which you are
using the terminal.
For example, GPS location fixes are often difficult to obtain
indoors, in covered locations, between high buildings, or in
other situations where you have not established a clear
broad view of the sky.
See: IMPORTANT - Things to Keep in Mind.
The GPS location Service can assist your Dispatcher or
Colleagues in many ways such as more efficient deployment
of resources or locating your terminal if you trigger your
emergency service.
The terminal can be configured to display location
information on the terminal’s display or to send it over the air
to your dispatcher where it can be displayed in control center
(Please check with your Service Provider on the
configuration of your terminal).
•
•
•
•
In underground locations
Inside of tunnels or parking garages
Under any other metal or concrete roof or structure
Near a powerful radio or television tower
31
GPS Location Service
IMPORTANT - Things to Keep in Mind
Where adequate signals from multiple satellites are not
available (usually because your GPS antenna cannot
establish a view of a wide area of open sky), the GPS feature
of your terminal WILL NOT WORK. Such situations include
but are not limited to:
• When your GPS antenna is covered (for example, by your
hand or other object) or facing the ground
• In temperature extremes outside the operating limits of
your terminal
Even where location information can be calculated in such
situations, it may take longer to do so. Therefore, in any
emergency situation, always report your location to your
dispatcher.
Furthermore, please note that even where adequate signals
from multiple satellites are available, your GPS feature will
only provide an approximate location, often within 20 - 100
meters from your actual location.
Enhancing GPS Performance
Sometimes the GPS feature of your terminal may be unable
to complete a location calculation successfully. You will then
see a message indicating that your terminal cannot see
enough visible satellites.
To maximize the ability of your terminal to determine a
location fix please note the following guidelines:
• The GPS feature works best where there is nothing
between the GPS antenna and a large amount of open
sky. If possible, move your vehicle away from tall buildings
and foliage. While performance in a building is improved
by moving closer to windows, glass with certain sun
shielding films may block satellite signals.
• Position your vehicle to enhance reception, giving the
antenna clear access to satellite signals. Signals from
GPS satellites are transmitted to your GPS antenna. Do
not cover the antenna area with your fingers or anything
else.
• Stay in network coverage. Depending on who your service
provider is, the network will provide your terminal with
information that helps determine your location more
quickly and accurately.
32
GPS Icon
When your terminal is receiving valid GPS location data, a
GPS icon will be shown in the display:
Please note, that during emergency mode, your terminal will
not display the GPS icon even when receiving GPS location
data. If valid GPS location data is available when you leave
emergency mode the GPS icon will be displayed again.
GPS Enable/Disable
1. From the main menu, press the Menu button and select
More... > Location > Interface.
The current selection (On/Off) is highlighted.
2. Select the new choice. The display shows:
On — Location Service On
Off — Location Service Off
Entering GPS Location Service
To enter the GPS sub-menu,
press the Menu button and
select More... > Location:
Position — provides the actual
position information.
Test Page — provides detailed position information.
Scroll to your selection and press Select to access the next
display.
This estimate of accuracy of the calculated location is only a
very rough estimate and may vary substantially from the
33
GPS Location Service
Interface — allows you to
enable/disable the GPS location
service.
actual accuracy of the approximate location information
reported.
The variation will vary in accordance to the GPS Configuration set
by your Service Provider.
The availability of the GPS Location menus is dependent on your
terminal configuration, please contact your Service Provider for
further details.
Viewing Your Position
1. From the main menu, press the Menu button and select
More... > Location > Position.
2. Scroll to view the entire screen.
This displays the following information about the last time
your location was calculated (if available):
• The time the location was last calculated
• The latitude expressed in degrees, minutes, and seconds
• The longitude expressed in degrees, minutes, and
seconds
• The number of satellites used to calculate the location. In
general, more satellites make for better accuracy. The
maximum is twelve satellites.
To calculate your location again, press Rfrsh.
It may take your terminal several minutes to complete the
process of determining your location. During this time, a
message usually appears on your terminal’s display stating:
• Insufficient Visible Satellites, or
• Insufficient Visible Data
For tips on getting the best location calculation, see
“Enhancing GPS Performance” on page 32.
The Position screen displays the updated information.
To cancel a location calculation before it is completed:
Press Back to return to the previous screen.
Each time approximate location of your terminal is
calculated, the latest location information is stored in your
34
terminal and remains there even when your terminal is
powered off. You will see this information the next time you
view the Position screen.
If you received a terminal call or alert while attempting to
determine your location, the Position screen will disappear,
but your terminal will continue attempting to determine its
location. If it is successful, the new location information will
be displayed the next time you view the Position screen.
GPS Location Service
35
The Menu
To Enter the Menu Items
You can enter the menu items during a call. If you are viewing
a menu when a new call starts, the terminal will exit the
menu.
1. Press the Menu button.
2. Scroll to the required item, press Select to select.
If the menu item contains a further set of menu items as in
the example below, repeat step 2.
Navigating Menu Items
Home Display
2nd Sub-menu
1st Sub-menu
3rd Sub-menu
When scrolling up/down menu items, try also right/left
scrolling. (This will select the item or return to previous level.)
To Return to the Previous Level
Press Back.
To Exit the Menu Items
Press On Hook key.
36
Menu Icons
The following icons make it easy to identify the menu items at
first glance.
Menu Icon
Description
Main Menu Items/Context Sensitive Menu
Appears above the Menu button if the main menu
items/context sensitive menu are active.
Messages
• Send status messages,
• Send short text messages (free text or according
to user defined or predefined templates),
• Receive messages in Inbox.
Contacts
Add, search, edit, or erase entries in the contact
list.
Security
Lets you turn On/Off and verify security features,
and change passwords.
Setup
Allows you to customise your CM5000.
More...
Contains more customisable menu items.
The Menu
Scroll Bar
Indicates navigation among items that occupy
more than one screen. If all items appear in one
screen, the scroll bar is empty.
37
List of Menu Items
Messages
Contacts
Security
Setup
New Message
Inbox
Outbox
Templates
Predefined
Send Status
New Contact
Existing Contacts
PIN Protect
Change Code
Set Ring
Ring Style
Set Volume
Language
Data Setup
Group Audio
Tones
Display
Battery
More...
Group Setup
My Info
Recent Calls
Shortcuts
Networks
Location
PNC Mode
This is the standard menu layout. Your Service Provider may
enable/disable some menu items or change their names.
38
Messages
Refer to “Messages” on page 62 for details.
Contacts
General
Contacts stores Private, Phone, and PABX numbers. Each
Contacts entry can store several numbers. A Contacts entry
contains:
• A name — A name is required if you are storing more than
one number to the entry; otherwise, it is optional. Typically,
this is the name of the person whose contact information is
stored in the entry.
• A Contacts type — Each number stored must be
assigned a Contacts type.
• A number — Each Contacts entry must contain a number.
This may be any type of phone number and Private ID
• A Speed Dial number — When you store a phone
number, it is assigned a Speed Dial number. You can
accept the default Speed Dial number or change it.
If set up by your Service Provider.it is not possible to create or edit
Contacts or dial a number which is not in the Contacts list. The menu
items for creating, editing, and deleting Contacts are not available.
Contact Icons
The Menu
In the contact list display, the following icons may appear
next to the contact numbers to indicate the type of stored
number.
Contact Icon
Description
Private ID Number
Mobile Phone Number
Home Phone Number
39
Contact Icon
Description
Work Phone Number
PABX Number
Other Phone Number
Pickers
Indicate more than one number is stored
with the contact.
Creating a Contact
1. From the Home display, press
Contcs. Select
[New Contact].
OR
From the main menu select
Contacts. Select
[New Contact].
2. Enter name. Press Ok to
confirm.
3. Scroll left or right and select the
type of stored number (such as
Private).
4. Enter number (#). Press Ok.
5. Scroll up and down the entries.
Continue to enter other types and numbers, as you may
keep several numbers (Private, Mobile, Home, Work,
PABX, Other, Speed Dial number) for the same person
under the same contact name. To correct an entry, press
Change.
6. When finished, press Done. Press Back to return to Home
display.
40
Editing a Contact
1. From the contact list, scroll to
the entry you want to edit.
2. Press the Menu button to enter
Contacts Menu. Select Edit.
The entry details screen
displays.
3. Follow the instructions in
“Creating a Contact” on page 40 to edit the various fields.
Deleting a Number
1. From the contact list, scroll to the entry that contains the
number you want to delete.
2. Scroll left or right to display the contact type for the number
you want to delete.
3. Press the Menu button.
4. Select Delete Number.
5. Press Yes to confirm.
If an entry contains only one number, deleting the number deletes
the entry.
Deleting a Contact
3. To delete the entire entry, select Delete Contact.
41
The Menu
1. From the contact list, scroll to the entry you want to delete.
2. Press the Menu button.
4. Press Yes to confirm.
Deleting All
To delete all the contacts:
1. From the contact list, press the
Menu button.
2. Select Delete All.
3. Press Yes and Yes once again
to confirm.
Capacity
You can check how many numbers are used and how many
numbers remain free in your Contact list.
To check the capacity:
1. From the contact list, press the Menu button.
OR
From a contact detail display, press the Menu button
2. Select Capacity.
3. Select from the following options:
• Private — shows Private numbers capacity
• Phone/PABX — shows Phone/PABX numbers capacity
• Contact — shows contacts capacity
4. Select Back to exit.
42
Security
From the main menu, select >
Security
or > More... > Security
PIN Protect
Network access protection is configured by your Service
Provider:
• No access to network operation — you can only send or
receive Emergency Calls and adjust the volume level. Unit
lock takes effect at the next power on.
To protect access to network operation:
1. From the main menu, select Security > PIN Protect.
2. Select On and press Select.
3. At the Input Code prompt enter the 4-digit code (factory
setting 0 0 0 0). To avoid disclosure of the code, asterisks
are displayed instead of the code digits. The display will
show the following message:
Unit Locked — you entered the correct code. The display
returns to the Security sub-menu and shows the active
setting: On.
The Menu
To unlock the CM5000 before powering off:
1. From the main menu, select > Security > PIN Protect.
2. Select Off and press Select.
3. At the Input Code prompt enter the 4-digit code.The
display will show the following message:
Unit Unlocked — You entered the correct code. The display
returns to the Security sub-menu and shows the active
setting: Off.
To unlock the CM5000 after powering on, enter the code at
the prompt. The CM5000 enters the Home display.
43
If you fail to enter the correct code, the following message will
be displayed:
Incorrect Code Entered — You are prompted to try again.
After failing, your CM5000 will be blocked. Please check with
your Service Provider how many failed attempts are allowed.
Change Code
From the main menu, select > Security > Change Code.
The default PIN code is 0000.
At the Input Code prompt, enter the 4-digit code. If the old
code does not match the entered code at verification, the
display prompts you to re-enter the old code.
If the entered code matches the old code, the display
prompts you to enter a new 4-digit code and to repeat it for
confirmation. If the confirmation code does not match the
new code, the display prompts you to re-enter the new code.
When the new code is accepted, the display shows
Code Accepted and returns to the Security sub-menu.
44
Setup
From the main menu, select Setup.
This sub-menu allows you to change your CM5000
configuration: ring style, volume, language, data setup,
speaker, tones, and display.
Setting the Ring Tone
From the main menu, select
Setup > Set Ring.
You can turn on or off the ring
tone by selecting the respective
option.
To turn on or off the ring for
incoming calls and messages
separately select Details. Select
the desired option:
• Ring Calls — to set the ring
for incoming calls to on/off.
• Ring Msgs — to set the ring
for incoming messages to on/off.
Setting the Ring Style
The Menu
This sub-menu allows you to set
the incoming call ring style.
From the main menu, select
Setup > Ring Style.
Upon entry into this sub-menu,
the display shows the current ring
style used.
To set the ring style scroll to the desired style and press
Select.
45
Setting the Volume
This sub-menu allows you to
adjust the ringer, earpiece,
speaker, and keypad tone
volume.
To set the volume:
1. From the main menu, select
Setup > Set Volume.
2. Scroll through the list:
• Ringer Vol — sets ringing tone volume.
• Speaker Vol — sets speaker volume (the same as volume knob).
• Keypad Vol — sets keypad pressing tone volume.
3. Select the required item, and press Change.
4. Adjust the volume level using left/right navigation keys or
Rotary Knob. A feedback tone is heard, and a volume level
bar is displayed.
5. Press Back to exit.
6. Press Done to accept the settings.
Setting the Display’s Working Language
From the main menu, select
Setup > Language.
The display shows the current
language used. You can
customize your CM5000 to
operate in English, German,
French, Spanish, Dutch, Swedish
or in a language defined by your Service Provider. The
default setting from factory is English.
Scroll to the desired language and press Select. The display
shows the selected language for a few seconds.
46
Setting Group Audio
1. From the main menu, select
Setup > Group Audio.
2. The display shows the current
audio setting. When set to:
• Always Loud — received
audio is outputted through an
external speaker despite the
Speaker Control settings.
•
Speaker Control — received
audio is outputted accordingly
to the Speaker Control settings.
3. Select the required setting.
Incoming Private, Phone and PABX calls are always outputted
accordingly to the Speaker Control settings.
Setting Tones
From the main menu, select
Setup > Tones.
The Menu
This sub-menu allows you to
activate/deactivate the CM5000
tones.
For a detailed list of tones, see
Tones section.
47
Setting Keypad Tone
To activate/deactivate keypad
tone at every key press:
1. From the main menu, select
Setup > Tones >
Keypad Tone.
2. Scroll through the settings (On/
Off).
3. Choose required setting, and press Select, or press Back
to exit.
Setting All Tones
To activate/deactivate all tones (keypad tone and other
activity tones used in your CM5000):
1. From the main menu, select Setup > Tones > All Tones.
2. Scroll through the settings (On/Off).
3. Choose required setting, and press Select, or press Back
to exit.
Setting Talk Permit Tone
There are 3 tone settings:
• No Tone (no tone heard upon pressing the PTT).
• Short Tone (a short tone heard upon pressing the PTT).
• Normal Tone (the factory-default tone heard upon
pressing the PTT).
To change your Talk Permit Tone settings:
1. From the main menu, select Setup > Tones > Talk Permit.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Setting Car Horn Tone
To activate/deactivate car horn notification about receiving
individual call while the ignition is off:
48
1. From the main menu, select Setup > Tones > Car Horn.
2. Scroll through the settings (On/Off).
3. Choose required setting, and press Select, or press Back
to exit.
Display Features
The display menu controls the
display appearance.
From the main menu, select
Setup > Display:
• Text Size — sets size of text
on the display.
• Screen Saver — covers the
CM5000 display after the CM5000 stays idle for a preprogrammed period of time (if configured by your Service
Provider).
• Backlight — a backlight lights the display and keypad
when you make or receive a call, or press keys or buttons.
Backlight can be set to Automatic or Disabled.
• Wallpaper — changes the wallpaper that appears on the
idle screen.
• Contrast — sets the contrast of the display.
The Menu
Setting the Text Size
1. .From the main menu, select
Setup > Display > Text Size.
2. Press Change. Select
Standard or Zoom to see the
text on the display in two sizes.
Screen Saver
1. From the main menu, select Setup > Display >
Screen Saver.
2. Press Change. Press Change again and select the screen
saver setting: Auto or Disabled. If set to Auto the screen
49
saver turns on after 30 seconds of inactivity.
3. Scroll to Text. Press Change. Type/edit the screen saver
text using the keypad. (For details on text editor use, see
“Writing Text” on page 69).
4. Press Done to exit.
Setting the Backlight
You can set the function and brightness of the backlight.
To enter your backlight settings sub-menu:
1. From the main menu, select Setup > Display > Backlight.
2. Press Change.
3. Select required setting.
• Function — your CM5000 has 4 backlight settings:
Automatic — Any key press turns the backlight on.
The backlight remains on until the pre-programmed
timer runs out.
Disable — The backlight feature is disabled.
Semi-automatic — Per default the backlights are
switched off. You can switch the backlights on by
pressing the Enter key. After a few seconds (configured by your Service Provider) the backlights switch off
automatically.
Manual — The backlight remains on. To turn the backlight on/off press the Clear key.
• Brightness — you can set the brightness to High or
Low.
Setting the Wallpaper
1. From the main menu, select Setup > Display > Wallpaper.
2. Press Change.
3. Select required setting (On/Off).
4. Press Done to exit.
When On is set, the radio displays pre-programmed
wallpaper in the background
50
Setting the Contrast
1. From the main menu, select Setup > Display > Contrast.
2. Press Change.
3. Use the left/right navigation keys or Rotary Knob to adjust
the contrast.
4. Press Ok.
5. Press Done to exit.
Battery Level
From the main menu, select
Setup > Battery.
The display shows Battery level.
More...
From the main menu, select More. This sub-menu Contains
more customisable menu items.
Entering Group Setup
The Menu
From the main menu, select
More > Group Setup. This submenu allows you to set the Scan
and My Groups features.
Group Scan
From the main menu, select
More > Group Setup > Scan.
This sub-menu allows you to
activate/deactivate scanning,
view the active scan list, and edit
the scan lists.
51
Scanning
This sub-menu allows you to activate/deactivate the
scanning of a list of pre-defined groups programmed in the
CM5000. The CM5000 will join any group call as long as this
group is defined in the scan list and scan is turned on.
From the main menu, select More > Group Setup > Scan >
Scanning.
After completing the settings, the display returns to the Scan
sub-menu.
When the CM5000 is in DMO, Gateway or Repeater modes you
cannot activate the scanning. An error message will be displayed.
Active List
This sub-menu allows you to view the active scan list.
1. From the main menu, select More > Group Setup > Scan
> Active List. Press View.
2. Scroll to the required list and press View to see the groups
that belong to the list.
3. Scroll to the required group and press View to view the
group status (attached or not attached) and priority (if preprogrammed).
4. Press Back to return to the previous display. Then, if
required, press the Menu button. You can select to delete
the group from the scan list or change its priority.
If the Network List is empty, it will not be displayed.
Scan Lists
1. From the main menu, select More > Group Setup > Scan
> Scan Lists.
2. Scroll to the required scan list. Press View to see the
groups used in the scan list. Press Back to return to the
previous display.
3. To edit/view the contents of a scan list, press the Menu
button.
52
4. In the List Optns sub-menu, scroll to the required option
and press Select.
53
The Menu
• Rename the active scan list. Enter a new name (alias)
and press Ok. The display shows the new setting.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes. You will be prompted to remove all groups from the
selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The list
does not show folders whose groups are fully used in
the selected scan list. Press Ok to select a folder.
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press Ok.
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
A call from a high priority group will interrupt an ongoing call with a medium and low priority.
A call from a medium priority group will interrupt an
on-going call with a low priority.
A call from a low priority group will not interrupt any
on-going call.
• Edit the scan list groups.
> Scroll to the group you wish to remove from the
selected scan list, and press Delete. You will be
prompted to remove the selected group. After a few
seconds, the display shows the updated scan list.
> To change the group priority, press Priority. Scroll to
the selected priority and press Select.
My Groups
This sub-menu allows you to
select/edit your favourite group
list.
Selecting a Group from My Groups
1. From the main menu, select More > Group Setup >
My Groups > Select. (If the folder is empty, add groups.)
2. The screen returns to the Home display. My Groups is
displayed as the first highlighted folder in the list of folders.
You can now scroll through the favourite group list. Press
Select to confirm your choice.
When selecting My Groups and no groups exist from the
current DMO/TMO, you may be forced to switch from TMO to
DMO or from DMO to DMO. In this case you will be prompted
to accept the mode change.
Adding a Group to My Groups
1. From the main menu, select More > Group Setup >
My Groups > Edit List > [New Group].
2. Select a group by folder search (“TMO/DMO by Folder”).
Select the folder and select the group. The group is added
to the “My Groups” folder. OR, select a group by alphabetic
search (“TMO/DMO by abc”). Enter the first character of
the group’s name.
Deleting a Group from My Groups
1. From the main menu, select More > Group Setup >
My Groups > Edit List.
2. Select the group you wish to remove. Select Yes to confirm
removal.
54
Deleting All Groups from My Groups
1. From the main menu, select More > Group Setup >
My Groups > Edit List.
2. Press the Menu button. Select Delete All. Select Yes to
confirm removal.
Viewing Personal Information
Use this feature to view your own
private number at any time.
1. From the main menu, select
More > My Info.
2. Select My Private Num.
Recent Calls
From the main menu, select
More > Recent Call.
You can view the history of all
calls:
If the number of a recent call is stored in the contact list, the
name associated with the number appears in the recent calls
list.
An icon appears beside the name or number, indicating the
contact type of the number used in the call. See “Contacts”
on page 39.
Old calls remain in your recent calls list until you delete them
or until they reach the end of the list.
55
The Menu
• Dialled Calls
• Received Calls — calls you
answered
• Missed Calls — calls received but not answered, or
rejected by the CM5000.
Each list of calls may contain up to 10 numbers, the most
recent call being at the top of the list.
A number dialled more than once, will appear only once in
the list.
You can make a Phone, PABX, or Private Call from the entry,
depending on the entry you are selecting in the list.
Shortcuts
Use shortcuts to access frequently used menu items.
From the main menu, select
More > Shortcuts.
The display shows the shortcut
list.
You can access a shortcut by
pressing Menu button and then
the respective numeric key.
Creating Menu Shortcut
For example, let’s create a shortcut to the All Tones options.
1. From the main menu, select Menu > Setup > Tones, then
highlight All Tones.
2. Press and hold the Menu button until a confirmation screen
appears. Press Yes to confirm.
3. The first free position is assigned as a shortcut key. A
confirmation screen appears. Press Done to confirm.
Editing Shortcuts
1. From the main menu, select More > Shortcuts.
2. Scroll to the shortcut you wish to edit.
3. Press the Menu button and select Edit.
4. After a few seconds, you will be prompted to confirm the
newly created shortcut. The first free position is assigned
as a shortcut key. Press Yes to confirm. Press No to cancel.
If the number is already assigned as a shortcut for another
option, you will be asked to replace the current shortcut
number with a newly created one.
56
Deleting a Shortcut
1. From the main menu, select More > Shortcuts.
2. Scroll to the shortcut you wish to delete.
3. Press the Menu button and select Delete. Press Yes to
delete a shortcut. Press No to cancel.
Deleting All Shortcuts
1. From the main menu, select More > Shortcuts.
2. Press the Menu button and select Delete All. Press Yes to
delete a shortcut. Press No to cancel.
Networks
From the main menu, select
More > Networks.
This sub-menu allows you to
select the network your CM5000
registers to, and what mode it
operates on.
Selecting Home Only Network Registration
From the main menu, select More > Networks >
Networks Sel > Home Only.
Using the Select Net Registration
If configured by your Service Provider, this sub-menu allows
you to select manually the network from the allowed network
list you want your CM5000 to be registered to.
1. From the main menu, select More > Networks >
Networks Sel > Select Net.
2. The list of the allowed networks is displayed. Scroll to the
desired network.
57
The Menu
Selecting this sub-menu causes your CM5000 to recognise
the first network on the allowed network list only and to
register to it.
A network may have an alias. Press the Menu button to
view the network ID. Then press Select.
3. Return to the Home display. The display shows the network
ID or alias.
Selecting Trunked Mode
This sub-menu allows you to
select the mode your CM5000
will be operating on.
To set up your operating mode:
1. From the main menu, select
More > Network >
Trunked Mode.
2. The CM5000 switches to Trunked Mode.
Selecting Direct Mode
This sub-menu allows you to
select the mode your CM5000
will be operating on.
To set up your operating mode:
1. From the main menu, select
More > Networks >
Direct Mode.
2. The CM5000 switches to Direct Mode.
Selecting Gateway Mode
This sub-menu allows you to
select the mode your CM5000
will be operating on.
To set up your operating mode:
1. From the main menu, select
More > Networks >
Gateway Mode.
2. The CM5000 switches to Gateway Mode.
58
Selecting Repeater Mode
This sub-menu allows you to
select the mode your CM5000
will be operating on.
To set up your operating mode:
1. From the main menu, select
More > Networks >
Repeater Mode.
2. The CM5000 switches to Repeater Mode.
Setting Transmit Inhibit (TXI) Mode
This mode should always be set
before entering areas where
transmission is prohibited, e.g. in
hospitals or in potentially
explosive areas.
To activate the TXI Mode:
1. From the main menu, select
More > Networks > TXI Mode.
2. Select Activate.
The CM5000 will sound the “Transmit Inhibit” tone. The display shows TXI Mode in the first row, and the solid amber LED
indicates the TXI Mode.
To deactivate the TXI Mode, e.g. after you have left the area
where transmission is prohibited:
1. From the main menu, select More > Networks > TXI
Mode.
2. Select Deactivate.
The CM5000 sounds the “Transmit Inhibit” tone and exits
TXI.
59
The Menu
All menu items which cause transmitting are blocked in TXI Mode. It
is not possible to change the group.
Location
To enter the location sub-menu,
press the Menu button and select
More... > Location:
Position — provides the actual
position information:
This displays the following
information about the last time
your location was calculated (if available):
• The time the location was last
calculated
• The latitude expressed in
degrees, minutes, and
seconds
• The longitude expressed in
degrees, minutes, and
seconds
• The number of satellites used to calculate the location. In
general, more satellites make for better accuracy. The
maximum is twelve satellites.
Interface — allows you to enable/disable the GPS location
service.
Test Page — provides detailed position information.
This displays the following information (if available):
• Position
> The time the location
was last calculated.
> The latitude expressed
in degrees, minutes, and
seconds.
> The longitude expressed
in degrees, minutes, and
seconds.
> The antenna height.
60
> The direction of travel.
> The horizontal speed.
> The number of satellites used to calculate the
location.
• Satellites
> The satellite number
> The satellite status
> The satellite signal strength
• Version
> The GPS module software version.
Scroll to your selection and press Select to access the next
display.
This estimate of accuracy of the calculated location is only a
very rough estimate and may vary substantially from the
actual accuracy of the approximate location information
reported.
The Menu
61
Messages
General
The messaging feature lets you:
• send short text messages (free text or according to user
defined or predefined templates),
• send status messages,
• receive messages.
A status is a number corresponding to a pre-programmed
message in a list your group recognises. A text message is a
short text containing up to 140 characters. Each message is
stamped with the date and time it was left in the inbox.
If configured by your Service Provider it is only possible to send a
message to a private number that is stored in the Contacts list.
Entering the Messages Sub-menu
From the main menu, select
Messages.
The sub-menu allows you read
text messages, send text
messages, and send status
messages.
Scroll to your selection and press
Select to access the next display.
Creating a Message
1. From the main menu, select Messages > New Message.
An empty screen will open.
62
2. Type/edit your message using
the keypad.
Press the Menu button. Select
Store to add your message to
the template list. The number
assigned to the message is the
lowest free number.
Sending the Message
1. From Input Text display press
Ok.
• If set up by your Service
Provider you have the
option to send the message
to a private number or a
talkgroup.
• Otherwise select the mail recipient of your choice from
the contact list or enter the address directly.
2. Select Send to send the message.
The display will show one of the following delivery reports:
• Message Delivered — to indicate that the message
was successfully sent and received.
• Message Failed — the message was not received.
After sending the message, your CM5000 will return to the
templates list or to the message editor screen.
Using the Inbox
The inbox list contains new or old incoming text messages.
The inbox list can contain 20 messages at any time.
63
Messages
It is recommended to wait for the message acknowledge before
sending a new message.
Inbox Icons
The following icons indicate the status of messages in the
Inbox.
Inbox Icon
Description
Unread (New) Message
Indicates that you have not read the message yet.
Read (Old) Message
Indicates that you have read the message.
Sender Information in Message View
Indicates sender information (name or number).
Time and Date Stamp in Message View
Indicates the time and date of message arrival.
Entering the Inbox
From the main menu, select
Messages > Inbox.
The status of the list is displayed
for a few seconds:
• No New or Old Messages —
the screen returns to the
previous display within a few
seconds.
• Inbox Info — press any key or wait for a few seconds. The
display shows messages list.
Reading a Message in the Inbox
1. Scroll to the message.
2. Press Read.
New Message Received
If you press Back, you dismiss the message. You can access
the message later from the inbox.
1. Select Read to read the entire message. Reading a new
text message changes its state from New to Old. The read
64
message is kept in the Inbox.
2. The display shows the
incoming message, its number,
sender, and the first line of the
text message.
Handling Messages
When in the inbox or after
reading the message, press the
Menu button and select one of
the following options:
To view the list of messages sent from your terminal select
Menu > Messages > Outbox.
65
Messages
• Select Store and press Select
to store the message as a
template in the template list.
• Select Delete and press Yes to delete the message. When
the display shows “Deleted: Message n”, the current
message is deleted from the Inbox. The display shows the
next message (if any) or the message list.
• Select Delete All and press Yes to delete all the
messages. When the display shows “Deleted: All
Messages”, all the messages are deleted from the Inbox.
The display shows the next message (if any) or the
Messages sub-menu.
• Select Reply. This invokes the edit screen. Edit message
text and press Ok to reply to the message originator.
• Select Forward. This invokes the edit screen. The old
message body serves as the default message. Press Ok
to forward the message to selected target. See “Sending
the Message” on page 63.
• Press Back to return to the previous display.
The described options also aplies to all the messages that
were sent.
User Defined Templates
The user defined mail templates
are received, new, sent or
programmed messages that are
stored in the templates list and
may be used for sending
messages.
1. From the main menu, select
Messages > Templates. The first template in the template
list is displayed.
It is possible that the templates numbers are not consecutive.
2. In the templates list, scroll to the template you want to use.
Press the Menu button and select one of the following
options:
• View to view the message in the template
• Edit to edit the message in the template for your needs.
Press the Menu button to enter the Editor Menu. Select
Store to save the edited template.
• Delete and press Yes to delete the template. When the
display shows “Deleted: Template n”, the current template is
deleted from the Inbox. The display shows the next
template (if any) or the templates list.
3. Send the template. See “Sending the Message” on
page 63.
Predefined Templates
Predefined mail templates are
templates that are programmed
into your CM5000 by your
Service Provider. You are
allowed to perform limited edit
operations of the predefined
template and to send it, but you
66
will not be able to store the edited template or erase it from
the predefined template list.
From the main menu, select Messages > Predefined.
The first template in the predefined template list is displayed
(if no predefined template exist, the message No Predefined
will be displayed).
Sending a Predefined Template
1. Press Send or PTT to send the message.
2. The display will show one of the following delivery reports:
• Message Delivered — to indicate that the message
was successfully sent and received.
• Message Failed — the message was not received.
3. After sending the message, your CM5000 will return to the
predefined template list or to the message editor screen.
It is recommended to wait for the message acknowledge before
sending a new message.
Sending a Status Message
67
Messages
1. Switch to the desired talkgroup, to which you want to send
a status message.
2. From the main menu, select
Messages > Send Status.
3. In this example, Status 3 is the
last sent status. If you wish to
send a different status, scroll to
your selection in the list of preprogrammed statuses, or key
the status number. To stop scrolling, press Back. The
display returns to the select status list.
4. Press Menu button and then select View to view the status
message. Press Back to return to the status list.
5. Press Send to send the status message.
68
Writing Text
Selecting the Text Entry Mode
Text entry modes make it easy for you to enter names,
numbers, and messages.
In the text entry screen, select the Menu button >Entry
Mode, and then select one of the following modes:
•
•
•
•
Primary — for entering alphanumeric characters
Numeric — for entering numbers only
Symbol — for entering symbols only
Secondary — for entering alphanumeric characters. (This
mode is optional and you have to add it to the list.)
In the text entry screen, you can also press # key repeatedly
to change to Primary, Numeric, Symbol, or Secondary (if you
have set it up).
Adding Secondary to the List of Text Entry Modes
Secondary is convenient when you use one language, and
sometimes wish to switch to another one.
This mode appears in the list only if you set it up first via
the Menu button > Entry Setup.
None is the default programming from factory and indicates
no secondary entry mode is selected.
Selecting the Text Entry Method and Language
There are two text entry methods:
69
Writing Text
• TAP — Enter letters, numbers and symbols by pressing an
alphanumeric key one or more times.
• iTAP — Let the terminal predict each word as you press
an alphanumeric key.
You can use these methods in the languages programmed in
the terminal.
In the text entry screen, select the Menu button > Entry
Setup, and then change to one of the methods and its
related language (for example: TAP English).
Icons
In the text entry screen, icons tell you which text entry mode
and method you are using. A character counter icon indicates
the number of entered characters.
Primary Icons
Secondary Icons
Description
TAP — no capitals
TAP — capitalise next letter only
TAP — all capitals
iTAP — no capitals
iTAP — capitalise next letter only
iTAP — all capitals
Numeric Icon
Description
Enter numbers.
Enter numbers in iTAP method.
Symbolic Icon
Description
Enter punctuation and symbols.
TAP Display
Press a key and the display will show the following
information:
• the icon indicating the current text writing method—see
icons
70
• the main text entry area that will hold your message after
you selected the desired words
iTAP Display
Press a key and the display will show the following
information:
• the icon indicating the current text writing method — see
icons
• the main text entry area that will hold your message after
you selected the desired words
• a row of suggested characters/words will be displayed.
Keys Usage
List of Keys and Characters in Alphanumeric Mode
(TAP/iTAP)
• Except for keys 0 and 1, the top line for each key shows
numbers and upper case characters, and the lower line
shows numbers and lower case characters.
• Press and hold any numeric key to enter Numeric mode.
• To exit Numeric mode in iTAP, select the word.
• To exit Numeric mode in TAP, press and hold any numeric
key.
List of Keys and Characters in Alphanumeric Mode:
Key
Alphanumeric Mode (TAP/iTAP)
Press to cycle through single shift, caps lock,
and lower case.
1
./\_-:~10!?,@‘;()&“¿¡%£$¥¤
+x*[]=><#§
2
ABC2
abc2
3
DEF3
def3
Writing Text
0
71
Key
Alphanumeric Mode (TAP/iTAP)
4
GHI4
ghi4
5
JKL5
jkl5
6
MNO6
mno6
7
PQRS7
pqrs7
8
TUV8
tuv8
9
WX Y Z9
wxyz9
List of Keys and Characters in Numeric Mode:
72
Key
Numeric Mode
0 to 9
• Press to enter digit at insertion point.
• Press and hold any numeric key to enter TAP
alphanumeric mode.
• To exit TAP alphanumeric mode, press and
hold any numeric key.
List of Keys and Characters in Symbol Mode:
Key
Symbol Mode
0
+ - x * / \ [] =>< # §
1
. ? ! , @ _ & ~ , ; “ -( ) ‘ ¿ ¡ % £$¥¤
2
@ _ \
3
/ , ;
4
“ & ‘
5
( ) [ ] { }
6
¿ ¡ ~
7
< > =
8
£$¥¤
9
# % *
Writing Text
73
Other Keys:
Key
Any numeric
key
Description
• In TAP press any key to reject word completion and
continue with text entry A new completion will be
displayed, if available, after the time-out for TAP
expires.
• Press and hold to enter Numeric mode from TAP or
iTAP alphanumeric
*
• Press to insert a space.
• In TAP press to dismiss a word completion and insert a
space.
• Enter a newly created word into the user dictionary.
• Press and hold to enter a carriage return.
#
• Press once to cycle through all entry modes (symbolic,
numeric, primary and secondary if configured).
• Press and hold to return to the default entry mode.
Select
Press to select the highlighted choice and place it in the
main text area.
Delete
• Press once to delete the last entered character.
• Press and hold for long to clear the entire main text
area.
• Press to navigate up one line in a long text (several
lines). Press and hold to repeat.
• In TAP press to reject word completion and scroll up.
• Press to navigate down one line in a long text (several
lines). Press and hold to repeat.
• In TAP press to reject word completion and scroll within
the text area.
• Press to navigate to the left. Press and hold to repeat
• In TAP, if a word completion is available, press to reject
the completion.
• Press to navigate to the right. Press and hold to repeat.
• In TAP if a word completion is available, press to
accept the word.
Menu
74
Opens the Context Sensitive Menu if a context sensitive
menu is active.
Writing in iTAP Alphanumeric
For example, let’s write “David 232!”.
1. In the text entry screen, select the Menu button > Entry
Setup, and then change to iTAP English. Press Back to
return to the text entry screen.
2. In the text entry screen, select the Menu button > Entry
Mode, and then select Primary.
3. Press 3 key. The alternative row opens up and shows
D E F 3. Continue entering the letters by pressing one key
for each letter. The row shows the suggested words. Scroll
the alternative row to the right until you reach David.
4. Press Select to select the word. It is displayed in the main
text area.
Automatic shift to upper case is used at the beginning of a
message, after punctuation followed by space, or for the first
letter of a word created as a new Contact entry.
5. Enter the numbers by pressing one key for each letter. The
row shows the suggested numbers. Scroll the alternative
row to the right until you reach the required combination.
6. To enter the symbol, press 1 key. The row shows the
suggested symbol. Scroll the alternative row to the right
until you reach the required symbol. Press Select to select
the numbers. The numbers and symbol are displayed in the
main text area.
Word Locking
1. Try to enter the word. Scroll the alternate line for a word
option. Each option is successively highlighted and partially
locked.
2. Enter the second part of the word. The first part remains
unchanged (locked). The newly entered letters will be
highlighted and then locked while you scroll to the next
75
Writing Text
You can use the partial or full word-lock feature to add words
that are not in the dictionary and/or to narrow down the list of
alternates to those that begin with a particular prefix.
word option.
3. Press * key. The word is placed in the text area with a space
and automatically added to the dictionary.
Writing in Numeric Mode
1. Press # key to scroll to numeric mode. (OR, press and hold
any numeric key to enter Numeric mode.)
2. Press the relevant numeric keys to insert the digits.
Writing in Symbol Mode
1. Press # key to scroll to symbol mode.
2. Press 1 key. A series of symbols and punctuation appear
on the screen.
3. Scroll to the symbol and press Select.
Writing in TAP Alphanumeric
1. In the text entry screen, select the Menu button > Entry
Setup, and then change to TAP and its related language.
Press Back to return to the text entry screen.
2. In the text entry screen, select the Menu button >Entry
Mode, and then select Primary.
3. Press the key labelled with the desired character, once for
the first character, twice for the second, and so on. For
example, to enter “s”, press key 7 four times. To enter “7”,
press the key five times. If you do not press a key for a few
seconds, the character is accepted, and the cursor moves
to the next position.
Adding Words to the Dictionary
Each language comes with its own dictionary. You can create
words (including alphanumeric abbreviations). Once you
create these words and added a space, they will be
automatically stored in the dictionary and will appear as
choices whenever you press the same key combination in
the future.
76
What to do if...
What to do if...
Your CM5000 flashes the following messages:
Messages
Message Description
...-Rcvd
Call received but not answered, or rejected
Attachment
Failed
The CM5000 could not perform talkgroup attachment.
The CM5000 keeps on trying. If it does not succeed, try
another talkgroup.
Authenticate
Failure
The CM5000 could not register on an Authenticated
system (for example, the Authentication key is incorrect,
or Authentication is disabled in the CM5000).
Call Cancelled
Called CM5000 cancelled the call.
Call Ended
• Faulty channel. Please try later.
• Called CM5000 ended the call.
Call Preempted Channel being used for priority.
Emgcy In Use:
Wait For Mic
The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency
Call on the same talkgroup. The CM5000 microphone is
not active during this time, but the CM5000 will
automatically try to regain talk permit after a
predetermined time.
Emgcy Mic
Ended
The Hot Microphone timer has automatically expired, or
the user has pressed the PTT button to cancel the Hot
Microphone feature.
Emgcy Mic On
The Hot Microphone feature is active, and the CM5000
is automatically transmitting hands free emergency
audio.
Empty Entry
The speed number you dialled does not exist, or the
number exists but the group is non-selectable.
Faulty Unit
Error...
Self-test failed. An operational fault has been detected
with your CM5000. Record the error number. Turn your
CM5000 off and contact service.
77
Messages
Message Description
Group already
exists
The group you are attempting to add already exists in
the My Groups folder.
Insufficient
Visible Data
Your terminal is in the process of determining your
location. This may take several minutes to complete.
Insufficient
Your terminal is in the process of determining your
Visible Satellites location. This may take several minutes to complete.
Invalid ID
The entered number is not valid.
Invalid Shortcut The entered number is not valid.
position
Limited Service
Emergency Calls, Emergency Alarms and mobility
operations (e.g.: group attachment) are allowed. All
other incoming and outgoing call and data services are
blocked.
List Empty
There are no programmed entries in the scrolling list.
Type the entry.
List not Attached All talkgroups in the scan list are not attached.
List Partially
Attached
The scan list is active, but not all talkgroups are
attached to it.
Message
Delivered
Indicates mail successfully delivered.
Message Failed Indicates mail delivery failure.
The CM5000 is outside coverage. Return to coverage.
Mode
No Service
My Groups is
empty
You cannot view/delete groups when the My Groups
folder is empty.
My Groups is full You are not allowed to add a group to the My Groups
folder as it already contains the maximum allowed
number of groups.
Network
Trouble
78
Network problems. Please try again later.
Message Description
No Answer
The called party does not answer.
No Entries
This message is displayed when accessing an empty
list.
No Group
Attachment failed. CM5000 detached from current
talkgroup. Please wait until the CM5000 attaches again
to the current talkgroup.
No Group
• Displayed when you are out of the normal coverage
area of your selected talkgroup. Please select a new
talkgroup that is valid for your working location.
• Indicates a favourite group was removed from the My
Groups folder.
No List
The Network List is empty.
No New or Old
Messages
Indicates there are no new or old messages in the
Inbox.
No Selected
Scan List
You selected an empty Network List (No List).
No Service
The CM5000 is out of coverage.
Not Allowed To
Start Call
You are not allowed to dial a number which is not in the
Address Book - if set up by your Service Provider.
Not Allowed
To Transmit
Release PTT and try again later.
• You are not allowed to send a text message or a status
message to a number which is not in the Address
Book if set up by your Service Provider.
Only One
Entry
There is only one programmed entry in the scrolling list.
Overcharging
The CM5000 turns off. Remove CM5000 from charger.
Overheating
The CM5000 turns off. Keep it turned off for five
minutes.
Party Busy
The called CM5000 is busy.
79
What to do if...
Messages
Messages
Message Description
Party Not
Available
• The called CM5000 is out-of-range. Please try again
later.
• The called CM5000 is turned off. Please try again
later.
Please Try
Again
The CM5000 could not place the call.
Please Wait
Connecting
A message during startup.
Registration
Failure
The CM5000 could not register within the system.
Please try again later.
Request Timed
Out
Triggered by timer expiring - request was sent out
properly but reply was not received while no network
error was detected.
Service
Denied
Invalid number. Call your Service Provider.
Service Not
Available
This service is not available on the current network.
Service
Restricted
This service has been restricted by your Service
Provider or it has not been purchased.
Speaker Volume Use Rotary knob to adjust volume level. (Rotary knob is
bars
programmed to “Dual” or “Volume”).
Talkgroup
...Added
Group name added to the favourite talkgroup folder.
TG ... cannot be You cannot delete this group from the favourite
deleted
talkgroup folder. Your Service Provider has set this
group to non-deletable.
Try Again Later
The requested service is temporarily unavailable.
Unit
Disabled
Check with Service Provider.
80
Message Description
Unit is OK
Warn...
Self-test error. A minor fault has been detected with
your CM5000. The CM5000 is still fully operative.
Should this error recur, note the error code and contact
service.
Unit
Not Attached
The CM5000 could not attach to the system. The
talkgroup may not be defined in the system. Please try
another group.
81
What to do if...
Messages
Tones
= High Tone;
Description
Type
= Low Tone
Repeated
Idle
• Back to Home display
• Back to coverage
• Back to full service
Once
Clear to send
Once
• Bad key press
Once
• Good key press
• CM5000 self-test fails
at power up
• From out-of-service to
in-service
Once
In Call
• Call clear warning
• Call modified
Once
Call waiting tone while
Phone or Private Call
are pending
Every 6 seconds,
until a call is
terminated.
Data Connected or
Data Disconnected.
Once
Talk Permit sounds
upon pressing the PTT.
Once (Normal
Tone)
Once (Short Tone)
Talk Permit without
gateway sounds upon
pressing PTT. The tone
indicates the gateway is
no longer available.
Twice
• Talk Prohibit
• System busy
• Called terminal not
available or busy.
Until you release
the PTT
82
Once
= High Tone;
Description
= Low Tone
Type
Repeated
Once
DMO Entering
Once
DMO Exiting
Once
Phone ring back
(sending)
Every three
seconds, until the
called user
answers or call is
rejected.
Phone busy
Every 0.5 seconds
Status message sent to
the dispatcher or failed.
Twice
Tones
• Call disconnected or
failed due to network
• Wrong number dialled.
Incoming Calls
Status message
acknowledged by the
dispatcher.
Four times
Your CM5000 received
a Group Call without
gateway. (setup only)
Once
High Priority Group Call
received
Once
Emergency Alarm sent
or received
Twice
Emergency Alarm failed
Four times
Emergency Call
received
Once
Phone ring (reception)
Full-duplex Private Call
Private Call received
According to the Ring
Style sub-menu setting.
Until you answer
or the call is
rejected.
Until the call is
answered
83
= High Tone;
Description
Type
= Low Tone
Repeated
Private Call ringing to
the caller
Until the call is
answered
Half-duplex Private Preemptive Priority Call
(PPC) ring.
Every 4 seconds
until the call is
answered or
rejected.
Full-duplex Private PPC
ring.
Every 4 seconds
until the call is
answered or
rejected.
Limited Service
Once upon
entering limited
service
New Mail Received
Once
New Group Call
Once
General
Volume setting
(earpiece, keypad,
speaker)
Continuous
Volume setting (Ringer)
While setting the
volume
Transmit Inhibit (TXI)
Once
DTMF (0-9, #, *) during
the call
84
DTMF
Continuous, until
the user releases
the key
TETRA/UHF Analogue Gateway Mode
General
The CM5000 allows you to establish gateway connection
between the TETRA network and an UHF analogue system.
Each time an unencrypted analogue radio user transmits to the
TETRA network an audible warning tone is sent to TETRA users in
group.
Entering TETRA/UHF Analogue Gateway Mode
The CM5000 must be connected to an analogue radio
through an analogue radio interface.
Choose the required TMO talkgroup before entering the
analogue/digital mode.
To enter the analogue/digital gateway mode:
1. From the Home display press
U
Menu button and then
9 alphanumeric key. The
display shows the current UHF
channel selected on UHF
mobile.
2. Select the required UHF
channel using up/down navigation keys.
3. Select Gte to enter the analogue/digital gateway operation
Select Tet to return to TMO or DMO mode.
85
TETRA/UHF Analogue Gateway Mode
The CM5000 can switch to the analogue/digital mode only in group
mode.
Exiting TETRA/UHF Analogue Gateway Operation
To exit the analogue/digital
gateway mode, from the UHF
Gateway display select Esc.
U
86
A
F
alias 11
B
backlight setup 47, 50
buttons
emergency 11
C
cleaning your unit 8
code changing 44
contact list 39
contrast setup 51
D
dialed call history 55
dialed number list 55
dictionary 76
direct mode operation (DMO) 12
display
contrast setup 51
home 8
language setup 46
TAP/iTAP 70
text size setup 49
wallpaper setup 50
DMO (direct mode operation) 12,
20
E
Index
Index
emergency button 11
emergency mode
entering 28
exiting 29
emergency operation 28
entering gateway mode 14
entering repeater mode 14
favourite group 16, 53
folder 16
favourite group 16, 20
selection 16, 21
G
gateway 22
gateway mode 13
entering 14
global positioning system (GPS) 31
GPS (global positioning system) 31
GPS enable/disable 33
group audio setup 47
group setup 51
H
history
dialed call 55
missed call 55
received call 55
home display 8
Hot Mic (hot microphone) 28
hot microphone feature (Hot
Mic) 28
I
icons
contacts 39
GPS 33
inbox 64
menu 37, 38
TAP/iTAP 70
ignition sense 6
inbox use 63
InterMNI call 20
iTAP
display 71
icons 70
87
selecting 69
writing text 69, 75
K
keypad
usage in alphanumeric mode 71
usage in numeric mode 71, 72
usage in symbol mode 73
keys
clear 6
enter 6
menu 10
navigation 6
soft 5, 10
knob
rotary 11
answering 27
direct dial 26
PIN (personal identification
number) 43
powering on/off 10
predefined template 66
private automatic branch exchange
(PABX) 26
private call 24
private number 11
R
list of menu items 38
locking the terminal 43
received call history 55
receiving calls 15
recent calls sub-menu 55
repeater 22
repeater mode 13
entering 14
ring style of incoming call 45
rotary knob 11
M
S
L
menu 10
menu item list 38
messages sub-menu 62
missed call history 55
more... sub-menu 51
my info sub-menu 55
open group 20
scan list 16
scan setup 51
scanning selection 16
screen saver
setup 49
text 49
security sub-menu 43
shortcuts sub-menu 56
silent emergency mode 7
soft keys 10
status message 62
sending 67
P
T
N
networks sub-menu 57
notations 4
O
PABX (private automatic branch
exchange) 26
PABX call 26
phone call 26
phone number 11, 26
phone/PABX call
88
talkgroup 16
talkgroup selection 16, 20
TAP
display 70
icons 70
selecting 69
Index
writing text 69
templates 62
text language 69
text message 62
text size setup 49
TMO (trunked mode operation) 12
TMO group call
making 18
receiving 19
tones
setting all tones 48
setting car horn tone 48
setting keypad tone 48
setting talk permit tone 48
tones setup 47
transmit inhibit (TXI)
mode 19
trunked mode operation (TMO) 12
TXI (transmit inhibit) 19
U
unlocking the terminal 43
user defined template 66
W
wallpaper setup 50
writing text 69
89
90
Soft Keys
LED
Emergency
Button
On/Off Hook
Keys
Enter Key
Clear Key
Alphanumeric
Navigation Key
Display
Microphone
Connector
Rotary Knob/
Power On
Display Icons
Menu Button
Alphanumeric
Keypad
Cleartone CM5000
Quick Reference Guide
.
From the Home display navigate to
the desired group. Press Select soft
key (if configured). Press and hold
PTT. Wait for the talk permit tone (if
configured) and talk. Release PTT to
listen.
Making a TMO Group Call
• Switching to Gateway or Repeater
modes is possible in TMO only
• From the Home display press
Optns, select Trunked Mode/
Direct Mode/Gateway Mode/
Repeater Mode.
Selecting Trunked/Direct/Gateway/Repeater Mode Operation
Back or
• To enter the menu, press the Menu
button.
• To scroll through the menu, press
/ .
• To select a menu item, press Select
soft key or
.
• To return to previous level, press
Using the CM5000 Menu System
To power the CM5000 on/off, press
and hold the Knob.
Turning the CM5000 On/Off
listen. Press
to terminate call.
Private mode using
or
. Dial a
number. Press and release PTT.
Ringing sounds. Called party
answers. Wait for the called party to
finish speaking. Press and hold PTT.
Wait for the talk permit tone (if
configured) and talk. Release PTT to
From the Home display select
Making a Private Call
Press and hold the Emergency
button. Press and hold PTT. Wait for
the talk permit tone (if configured)
and talk. Release PTT to listen. If
using “Hot Mic” feature, wait for the
Emgncy Mic On message to appear
on the display and talk without
pressing PTT.
To exit Emergency Mode, press and
hold Exit soft key.
Making an Emergency Group
Call
Enter DMO. Navigate to the desired
group. Press Select soft key (if
configured). Press and hold PTT.
Wait for the talk permit tone (if
configured) and talk. Release PTT to
listen.
Making a DMO Group Call
.
Backlight Control
You can either disable backlight
(covered operation) or have it
automatically turned on, by any key
press.
•
Tips & Tricks
Press the Menu button and select
Messages > New Message. Write
your message. Select Send. Select
your mail recipient or enter number.
Select Send, or press PTT to send
the new message.
Sending a New Message
Select the desired group, then press
the Menu button and select
Messages > Send Status. Select
status and press Send.
Sending a Status Message
reject or end the call press
Your CM5000 switches to the
incoming call and alerts you of the
incoming call. To answer the call,
press PTT to answer the call. To
Answering a Call
Menu Shortcuts
Group Audio Control
Unified Contact List
Text Size
•
“My Groups” Folder
You can see the text on the display in
two sizes: Normal or Zoomed
(Menu button > Setup > Display >
Text Size).
•
You can keep several numbers
(Private, Mobile, Home, Work, PABX,
Other) for the same person under the
same contact name.
•
You can control audio level for any
Private or Group Call. However, you
can define via the menu to have all
Group calls always loud (Menu
button > Setup > Group Audio).
•
You can easily access any menu
item, by pressing the Menu button
and a numeric key. (No delay
between the Menu button and the
key!)
You can ask your Service Provider to
program menu shortcuts.
You may also define a new shortcut:
enter the menu item, press and hold
the Menu button, and follow the
instructions in the display.
•
PIN Protect
To protect access to network
operation, from the main menu,
select Security > PIN Protect.
•
to
In the Home display, press
quickly access your “My Groups”
folder.
You can select any group (TMO or
DMO) and add it to your personal
folder.
6866539D54-A
www.motorola.com/tetra
@6866539D54@