Samsung NH200WHXEA User manual

Indoor Unit
NH080PHXEA
NH160PHXEA
DHW Tank
NH200WHXEA
NH300WHXEA
NH200WHXES
NH300WHXES
Air to Water Heat Pump
-Hydro Unit
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
E S F I P D DB98-32035A(2)
Features of your Air to water heat pump
• Quick Heating by TDM Technology
Floor heating is well known as the optimal heating option for indoor thermal comfort.
However, it takes 4~8 hours to heat up the room after it is turned on. Samsung EHS TDM
technology quickens that process by blowing hot air along with floor heating to warm up
the room.
• Integrated Heating & Cooling System at a Lower Cost
Time Division Multi (TDM), a smart alternating operation between air-to-water and
air to air, enables one outdoor unit to operate for both functionalities resulting in lower
product cost and space saving.
• Running Costs-Reduction of Up to 33.3%
Samsung EHS, known for its world class efficiency (11kW floor heating system with COP
of 4.55), can reduce 33.3% of your running costs as compared to a gas boiler.
• Price and Space Reduction of Up to 50%
With an all-in-one outdoor unit capable of both air-to-water and air-to-air functions,
Samsung EHS saves you in terms of the low initial purchase price & installation fee as well
as the space needed for an extra outdoor unit.
• High Performance at Low Temperature
Samsung EHS is made up of an inverter compressor optimally operated according to
the outdoor temperature, offering heating performance of 90% at -10°C and reliable frost
protection at -20°C.
RoHS Compliant
For easy future reference, write the model and serial
number down. You will find your model number on the
bottom right side of the air conditioner.
02_ Features
Model #
Serial #
Contents
04
Safety precautions
OVERVIEW
07
Control panel
CHECKING THE FUNCTION OF
BUTTONS AND ICONS
08
09
10
11
12
13
14
Space operation mode
DHW operation mode
Temperature adjustment
Hot key
Schedule
Status indicator
Optional function indicator
OPERATING BASIC FUNCTION
15
16
17
18
19
Available mode
Space heating operation
Space cooling operation
Water law
Domestic water heating operation
OPERATING HOT KEY FUNCTION
20
21
Urgent DHW mode
Outing mode
OPERATING ADVANCED FUNCTION
22
23
26
29
Setting the time
Setting the 7-day(weekly) schedule
Setting the daily schedule
Field setting mode
APPENDIX
43
43
44
45
48
Temperature table
DIP switch setting
Maintaining the unit
Troubleshooting tips
Product disposal
04
07
08
15
20
22
43
ENGLISH
SAFETY PRECAUTIONS
Contents _03
Safety precautions
Before using your new air conditioner, please read this manual thoroughly to ensure that you know
how to safely and efficiently operate the extensive features and functions of your new appliance.
Because the following operating instructions cover various models, the characteristics of your air
conditioner may differ slightly from those described in this manual. If you have any questions, call your
nearest contact center or find help and information online at www.samsung.com.
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Unplug the power plug
from the wall socket.
Do NOT attempt.
Do NOT disassemble.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
WARNING
Plug the power cord into a wall socket with the power specifications of the product or higher and use the socket for
this appliance only. In addition, do not use an extension cord.
• Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
• Do not use an electric transformer. It may result in electric shock or fire.
• If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified technician or service company.
• Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury.
Install a switch and circuit breaker dedicated to the air conditioner.
• Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not exposed.
• Failing to do so may result in electric shock or fire.
Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location,
in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak.
• This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall where it could fall.
• If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
• Failure to do so may result in electric shock, fire, an explosion, or other problems with the product.
• Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.
FOR INSTALLATION
CAUTION
This appliance should be positioned in such a way that it is accessible to the power plug.
• Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
• Failing to do so may result in abnormal vibrations, noise, or problems with the product.
Install the draining hose properly so that water is drained correctly.
• Failing to do so may result in water overflowing and property damage.
When installing the outdoor unit, make sure to connect the draining hose so that draining is performed correctly.
• The water generated during the heating operation by the outdoor unit may overflow and result in property damage. In particular, in winter, if
a block of ice falls, it may result in injury, death or property damage.
• The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable to be installed in
areas used for laundry.
• Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both
sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that can be disassembled in
conditions of complete safety either for people or things. For this reason, where it is not observed as indicated into the Installation Manual,
the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any
other means of elevation won’t be considered in-warranty and charged to end user.
04_ Safety information
FOR POWER SUPPLY
WARNING
Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on
a regular basis.
• Unplug the power plug and clean it with a dry cloth.
• Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.
When the appliance or power plug or power cord is damaged, contact your nearest service center
Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord or loose
wall socket.
• This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
• Unplug the power plug by holding the plug.
• Failing to do so may result in electric shock or fire.
Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over
a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power
cord into the space behind the appliance.
• This may result in electric shock or fire.
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the
circuit breaker.
• Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is flooded, please contact your nearest service center.
• Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and
contact your nearest service center.
• Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug.
Do not touch the appliance or power cord.
• Do not use a ventilating fan.
• A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
• Failing to do so may result in problems with the product, water leakage, electric shock, or fire.
• A delivery service for the product is not provided. If you reinstall the product in another location, additional construction expenses and an
installation fee will be charged.
• Especially, when you wish to install the product in an unusual location such as in an industrial area or near the seaside where it is exposed
to the salt in the air, please contact your nearest service center.
Do not touch the power plug or the circuit breaker with wet hands.
• This may result in electric shock.
Do not unplug the power plug or turn the air conditioner off with the circuit breaker while it is operating.
• Plugging the power plug into the wall outlet or turning the air conditioner on from the circuit breaker may cause a spark and result
in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well out of the reach of children, as packaging
materials can be dangerous to children.
• If a child places a bag over its head, it may result in suffocation.
Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating.
• Take special care that children do not injure themselves by inserting their fingers into the product.
Do not touch the air flow blade with your hands or fingers during the heating operation.
• This may result in electric shock or burns.
Do not insert your fingers or foreign substances into the air inlet/outlet of the air conditioner.
• Take special care that children do not injure themselves by inserting their fingers into the product.
Do not strike or pull the air conditioner with excessive force.
• This may result in fire, injury, or problems with the product.
Safety information _05
ENGLISH
• If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result
in electric shock or fire.
Safety information
FOR USING
WARNING
Do not place an object near the outdoor unit that allows children to climb onto the machine.
• This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly ventilated locations or near infirm people.
• Since this may be dangerous due to a lack of oxygen, Open a window at least once an hour.
If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug and
turning the circuit breaker off and then contact your nearest service center.
• Failing to do so may result in electric shock or fire.
If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug and
turning the circuit breaker off and then contact your nearest service center.
• Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.
• Failing to do so may result in electric shock, fire, problems with the product, or injury.
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
• Water dripping from the indoor unit may result in fire or property damage.
Check that the installation frame of the outdoor unit is not broken at least once a year.
• Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and current is measured according to ISO standard for
energy efficiency.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes,
chemicals, metal objects, etc.) on the appliance.
• This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
• This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
• As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not drink the water from the air conditioner.
• The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not disassemble the remote controller.
Do not touch the pipes connected with the product.
• This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food, animals, plants or cosmetics, or for any other
unusual purposes.
• This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from the air conditioner for long periods of time.
• This may result in harm to humans, animals or plants.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance.
• This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner from the wall socket and wait until the fan stops.
• Failing to do so may result in electric shock or fire.
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor unit since it has sharp edges.
• To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
Do not clean the inside of the air conditioner by yourself.
• For cleaning inside the appliance, contact your nearest service center.
• When cleaning the internal filter, refer to the descriptions in the ‘Cleaning the air conditioner’ section.
• Failure to do may result in damage, electric shock or fire.
06_ Safety information
Overview
CONTROL PANEL
Display panel
Up/Down button
DHW hot key
Outing hot key
Power(DHW mode)
Mode button (Space mode)
Mode button (DHW mode)
Set button
View button
Daily schedule setting button
Weekly schedule setting
button
Cancel/Delete button
Silent button
Schedule Set button
Lock button
Test button
Overview _07
ENGLISH
Power(Space mode)
Checking the function of buttons and indicators
SPACE OPERATION MODE
Mode
Button
Operation Space heating & cooling
Operation
mode
Space
mode
Display
Function
It can supply heating and cooling to the space when
the Power(Space mode) button is on.
Results: The heat pump will run in heating or cooling
mode.
Heating
Using this wired remote controller, only A2W can be
operating with heating mode.
A2A should be operated using its own wireless
remote controller.
If there are heating demands from both A2A and
A2W simultaneously, A2A is operating prior to A2W.
Cooling
Using this wired remote controller, only A2W can
operating with cooling mode.
A2A should be operated using its own wireless
remote controller.
If there are cooling demands from both A2A and
A2W simultaneously, A2A is operating prior to A2W.
Water law
The supply water temperature to the heating space is
operating according to outdoor temperature.
• When you push the Power(Space mode) button, It has no influence on the domestic water
heating. Domestic water heating only switched on or off according to the Power(DHW
mode) button.
8_ Checking the function
DHW OPERATION MODE
ENGLISH
Mode
Button
Operation Water heating Operation
mode
DHW
mode
Display
Function
It can supply warm water to the DHW tank when the
Power(DHW mode) button is pressed.
Results: Heat pump will be turned on with the
domestic water heating mode.
Economic
Economic DHW mode, which is heat pump only,
saving energy consumption.
Standard
Standard DHW mode, which is operated by both
heat pump and heater. However heater operating
time is still restricted.
Powerful
Powerful DHW mode, which is operated by both
heat pump and heater. In order to supply warm water
more quickly, electric heater is operating immediately.
• When you push the Power(Space mode) button, it has no influence on the domestic water
heating. Domestic water heating only switched on or off according to the Power(DHW
mode) button.
Checking the function _9
Checking the function of buttons and indicators
TEMPERATURE ADJUSTMENT
Mode
Button
Operation
mode
Temperature Adjust
Display
Function
To push up and down, modulate the water (Air)
temperature.
Supply water temperature to the load
Domestic water temperature
Room temperature
Outdoor temperature
Water law temperature
Results: The
or
controller.
will be displayed on the
Set
This button is used to find the current setting point
which you want to change.
According to Dip switch setting and operating modes,
Available setting points will be displayed by pressing
buttons in order.
View
Find the temperature which you want to view.
➔
➔
➔
➔
Results : Current temperature will be displayed in order.
10_ Checking the function
HOT KEY
ENGLISH
Mode
Hot key
Button
Up
Display
Function
To adjust set point temperature press arrows up or
down.
Results: The temperature can be set ranges from
5°C to 55°C and be adjusted by 0.5°C.
Down
DHW
When DHW mode is enabled, it is assured that the
full capacity of the heat pump is used for domestic
water heating only.
Results: The heat pump is operating for the
domestic water only.
Outing
Lowers each target temperature of operation modes
with pre-defined values stored in the Field Setting
Value sector of Wired Remote Controller. Keeps the
house at lower temperature to save your running
cost, you can use this button while having a vacation.
Checking the function _11
Checking the function of buttons and indicators
SCHEDULE
Mode
Button
Schedule
12_ Checking the function
Display
Function
The system operates according to a certain schedule
which is pre-defined by users or installers.
STATUS INDICATOR
ENGLISH
Mode
Status
Status
Display
Function
Compressor On
This icon indicates that the compressor in the
outdoor unit is running.
Back-up heater
On
These icons indicate that the back-up heater in the
hydro unit is operating on 1 step(2kW)
or
2 step(6kW) .
Booster heater On
This icon indicates that the booster heater in the
DHW tank is active(3kW). The icon is not used when
the DHW tank is not installed.
Solar thermal
panel On
It indicates when the solar panel is powered on.
DHW mode is stopping while solar panel is on in
order to save your energy cost.
Back up boiler On
The Back up boiler shall start to work as soon
as outdoor temperature reach to the targeted
temperature.
Users can adjust the temperature to allow the back
up boiler work. The icon shall not be displayed
without the Installation of the back up boiler.
Water pump On
This icon indicates that the water pump in the hydro
unit is On.
Domestic water
On
This icon indicates when the domestic water heating
mode is operating.
Defrost operation
On
This icon indicates that the defrost mode is active.
Anti freezing
operation On
The system automatically maintains the water
temperature above a freezing point to prevent from
freezing-fracture of piping system.
Sanitary operation
On
This function disinfects the DHW tank by periodically
heating the domestic water to a specific temperature.
Checking the function _13
Checking the function of buttons and indicators
OPTIONAL FUNCTION INDICATOR
Mode
Button
Optional
function
A2A
Operating
A2A has priority while both A2A and A2W are in
demand. When the A2A sign is on, the heat pump is
only working for A2A.
Child Lock
The remote controller buttons can be locked to
prevent children from changing the settings or from
pressing the buttons by accident.
Thermostat
connected
When the room thermostat is connected, the WaterLaw operation is active and the water temperature
is determined automatically depending upon the
outdoor temperature. The more cold the outdoor
temperature, the more warm water will be supplied.
vice versa.
Silent mode
To maintain the outdoor unit to operate quietly, fan
and compressor speed will be limited to a certain
value of the speed at a normal operating.
Not
available
This icon is displayed whenever a non-installed
option is addressed or a function is not available.
Test
Press this button for 5 sec to set Field setting values.
Energy
Indicator
It indicates 5 Eco-level of energy consumption
according to heat resources (Solar thermal, Backup
boiler and heat pump) and outdoor temperature.
14_ Checking the function
Display
Function
Operating basic function
AVAILABLE MODE
Heating
Cooling
Water law
Heating + DHW
Cooling + DHW
Water law + DHW
DHW
Urgent DHW
Outing (heating)
Outing (heating + DHW)
Operating basic function _15
ENGLISH
Under the installation of both A2A(Air-To-Air type air conditioner) and A2W(Air-To-Water type hydro unit)
at the same time, if our system operates only the heating mode of Air-to-Water Heat Pump,
actual performance of our Air-to-Water Heat Pump may be reduced a little as compared with its rated
performance. Because the part of the circulating refrigerant amount is bypassed into A2A type indoor
units during A2W’s normal operation.
Heating mode and cooling mode can not operate at the same time.
Operating basic function
SPACE HEATING OPERATION
In this mode, heating will be activated as required by the water temperature set point.
• The set point can be set manually
• or set weather dependant
1. Press Power(Space mode) button to turn on the heat
pump unit.
The heat pump will be turned on in the mode you select.
• Space water heating devices: Radiator or Fan coil unit
(field supply)
In winter season, the heat pump sometimes goes
into defrost mode to prevent from the freezing of the
outdoor heat exchanger.
The heat pump has a built-in protection mechanism
to prevent the unit from being damaged when it is
started immediately after being plugged in or stopped,
the heat pump will start up after 3 minutes.
CAUTION
2. Press the Mode(Space mode) button once to select the space heating mode.
The heat pump will run on heating mode.
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 15ºC to 55ºC.
The temperature is adjusted by 0.5ºC.
16_ Operating basic function
SPACE COOLING OPERATION
In this mode, cooling will be activated as required by the water temperature set point.
• The set point can be set manually
• or set weather dependant
ENGLISH
1. Press Power(Space mode) button to turn on the heat
pump unit.
The heat pump will be turned on in the mode you select.
• Space water cooling devices: Radiator or Fan coil unit
(field supply)
• Heating and cooling mode can not be selected at
the same time.
• Space cooling operation is not possible if the
installation is a heating only installation.
The heat pump has a built-in protection mechanism
to prevent the unit from being damaged when it is
started immediately after being plugged in or stopped,
the heat pump will start up after 3 minutes.
CAUTION
2. Press the Mode(Space mode) button twice to select the space cooling mode.
The heat pump will run on cooling mode.
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 5ºC to 25ºC.
The temperature is adjusted by 0.5ºC.
Operating basic function _17
Operating basic function
WATER LAW
In this mode, the heat pump operates according to the parameters for the weather dependent.
• The set point can be set manually
• or set weather dependant
1. Press Power(Space mode) button to turn on the heat
pump unit.
The heat pump will be turned on in the mode you select.
• Space air heating devices: Radiator or Fan coil unit
(field supply)
2. Press the Mode(Space mode) button three times to
select the mode.
The heat pump will run on heating mode according to
the outdoor temperature.
When water low is active, the target supply water temperature will be determined
automatically depending on the outdoor temperature: for heating mode, colder outdoor
temperatures will result in warmer water.
3. Press Up or Down button to set the desired temperature.
During water low, the user has the possibility to shift up or down the target water
temperature by a maximum of 5°C.
The field setting temperature is adjusted by 0.5ºC.
Ts
#2021/2031
Cooling WL
#2022/2032
#2061/2071
#2062/2072
Floor FCU
Heating WL
#2011
#2012 #2051
#2052 Ta
������������������������������
���������������������������������������������������
• All the Field Setting Values needed to re-design the water law for floor or FCU(radiator) can be
changed by using Wired Remote Controller’s Field Setting Mode.
• There are 2 types of water law for each mode, one for floor application, the other for FCU(radiator).
Both of them can be selected by using Wired Remote Controller’s Field Setting Mode.
• The target water temperatures exceeding the operation limit of heat pump(5~55ºC) after
reflecting user’s arbitrary input(temperature shift) will be neglected, and be kept maximum or
minimum respectively.
18_ Operating basic function
DOMESTIC WATER HEATING OPERATION
In this mode, domestic water heating will be activated as required by the water temperature set point.
• The set point can be set manually
1. Press Power(DHW mode) button to turn on DHW tank.
ENGLISH
The priority between heating/cooling/water-law and
DHW modes are depending upon the user’s input of
Field Setting Value of Wired Remote Controller.
The default priority is on the DHW mode.
• This mode can not be used when the DHW tank is
not installed.
• The Power(Space mode) button and the
Power(DHW mode) button can be selected at the
same time.
• In order to provide domestic hot water throughout the day, it is advised to keep the
domestic water heating operation on continuously.
• When the
icon is displayed, hot water is delivered to the DHW tank by the solar
panel. The operation between solar panel and heat pump can be determined by using
Wired Remote Controller’s Field Setting Mode.
2. Press Mode(DHW mode) button until required operating mode is displayed.
The heat pump will run on selected domestic water heating mode.
• Economic domestic water heating
• Standard domestic water heating
• Powerful domestic water heating
(
(
may operate)
operate immediately)
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 30ºC to 70ºC.
The temperature is adjusted by 0.5ºC.
Operating basic function _19
Operating hot key function
URGENT DHW MODE
If you want to enjoy a leisurely bath or need a lot of warm water urgently, select the DHW hot key.
When this mode is enabled, it is assured that the full capacity of the heat pump is only delivered for
domestic water heating.
1. Press DHW Hot key.
The full capacity of the heat pump is only delivered to
the DHW tank.
The booster heater is forced to operate until the
temperature of DHW tank reaches the set point.
• This hot function can not be used when the DHW
tank is not installed.
• If the Power(DHW mode) button has not been
turned on, this DHW key does not work.
• In this DHW function mode, both space heating and
floor heating are not available. The
icon is blinking for 3 seconds.
• This hot function remains available when the solar operation.
• The temperature set point is determined by user’s input during urgent DHW mode.
However, you can adjust the desired temperature using Up or Down keys.
To cancel the DHW mode
1. Press DHW Hot key once again to exit.
The heat pump is turned on a normal operation.
WARNING
By default field setting value option, this function will not be turned off automatically.
If you want a hot key function for a certain amount of duration time, change the field
setting value of remote controller.
20_ Operating hot key function
OUTING MODE
If you want to take a vacation, you can use the Outing hot key. When this mode is enabled, it is
assured that the heat pump maintains your house at a lower temperature to save energy cost.
1. Press Outing Hot key.
ENGLISH
The heat pump delivers heat at a low temperature.
If the Power(Space mode) button has been not
turned on, this key does not work.
To cancel the outing mode
1. Press Outing Hot key once again to exit.
The heat pump is turned on a normal operation.
It will return to a normal heating mode or DHW mode.
Operating hot key function _21
Operating advanced function
SETTING THE TIME
Your hydro unit contains a clock used to start and stop the unit automatically at a given time.
You must set the time when you purchase the hydro unit or reset the main power.
1. Push the Set button for 3 seconds.
• Mode : Normal operation.
• When setting the time, you can only use Up,
Down, Set, Cancel/Delete button.
• To cancel the setting, press the Cancel/Delete
button.
2. Set the day by pressing Up or Down button.
The ‘day’ indicator will blink. Set the day and press Set
button to save the setting.
3. Set the hour by pressingUp or Down button.
The ‘hour’ indicator will blink. Set the hour and press
Set button to save the setting.
4. Set the minute by pressing Up or Down button.
The ‘minute’ indicator will blink. Set the minute and
press Set button to save the setting.
After setting the minute, the operation returns to normal.
22_ Operating advanced function
SETTING THE 7-DAY(WEEKLY) SCHEDULE
1. Press the Weekly button.
The mode changes to the weekly schedule.
In this mode, you can only use Up, Down, Weekly,
Set, Cancel/Delete button.
To cancel the setting, press the Cancel/Delete button.
2. Set the day by pressing Up or Down button.
The On/Off indicator will blink. Set the On/Off status and
press Set button to save the setting.
3. Set the On/Off by pressing Up or Down button.
The ‘On/Off’ indicator will blink. Set the On/Off status
and press Set button to save the setting.
4. Set the operation mode by pressing Up or Down
button.
The ‘operation indicator’ will blink. Set the day and press
Set button to save the setting.
• To set the “Off” reservation, move to the step 6.
• It is impossible to set the Auto( ) mode.
5. Set the temperature by pressing the Up or Down
button.
The ‘temperature’ will blink. Set the temperature and
press Set button to save the setting.
The setting temperature is decided according to Dip S/W #2 of remote controller.
- Dip S/W #2 On : Setting the temperature of indoor.
- Dip S/W #2 Off : Setting the temperature of water outlet.
Operating advanced function _23
ENGLISH
Set the schedules for ON/OFF timer to be repeated each week.
Maximum 7 schedules may be set for each day.
• When using room thermostat, it is impossible to reserve
• If weekly schedule reserved 7 items is on same day, it is impossible to reserve.
In that case, When press the Weekly button, change the View mode of reservation.
• Setting the weekly schedule is for “Cool & Heat” Mode only.
• It is impossible to reserve several times for same day and same time.
Operating advanced function
SETTING THE 7-DAY(WEEKLY) SCHEDULE
6. Set the hour by pressing the Up or Down button.
The ‘hour’ indicator will blink. Set the hour and press
Set button to save the setting.
7. Set the minute by pressing the Up or Down button.
The ‘minute’ indicator will blink. Set the minute and
press Set button to save the setting.
8. Confirm the Schedule.
After step 7, all indicators are blinking except
“Reservation No”, “Weekly”. Then press the Set button.
• On this step, you can only use Set, Cancel/Delete button.
• If there is a reservation on same day and time, it will not be confirmed and
“Not Available” indicator will blink for 3 seconds. In this case, go back to the step 6.
Viewing the 7-day(Weekly) Schedule (On / Off) Display
On Reservation
24_ Operating advanced function
Off Reservation
Deleting the 7-day(Weekly) schedule
1. Select the schedule from Reservation View Mode.
2. Push the Cancel/Delete button for 3 seconds.
Operating the 7-day(Weekly) schedule
1. Operate automatically according to schedule.
2. If On schedule starts during the Urgent DHW mode, the Urgent DHW mode will change to
DHW mode.
3. If Off schedule starts during the Heat/Cool/Auto mode, the operation will stop.
In the following conditions, the schedule function will not operate.
• Outing
• Tracking of communication
• Installation of room thermostat
Operating advanced function _25
ENGLISH
3. The LCD pictures changes to the reservation mode after delete the schedule.
Operating advanced function
SETTING THE DAILY SCHEDULE
Set the daily schedule to reserve On / Off timer of DHW(Eco/Std/Power) and Silent mode.
At most 15 schedules may be set for day.
• If the field setting is for no use DHW and use other manufacturer tank, it is impossible to
reserve “DHW” mode.
• If daily schedule reserved 15 schedules is on same day, it is impossible to reserve.
In that case, when press the Daily button, change the View mode of reservation.
• It is impossible to reserve several times for the same time.
1. Press the Daily button.
The mode changes to the Daily schedule.
In this mode, you can only use Up, Down, Daily,
Set, Cancel/Delete button.
To cancel the setting, press Cancel button.
2. Set the On/Off by pressing Up, Down button.
The ‘On/Off’ indicator will blink. Set the On/Off status
and press Set button to save the setting.
3. Set the operation mode by pressing Up or Down
button.
The ‘operation indicator’ will blink. Set the operation
mode and press Set button to save the setting.
• When using other company DHW Tank or setting no
use DHW mode, the reservation mode is fixed to “Silent” mode.
• When setting use DHW mode, the mode is changed as followings with Up or
Down button.
- “On” Mode ;
➞
➞
( )➞
➞
Pwr mode (
) is selected in “Booster heater On”
- “Off” Mode ;
➞
➞
26_ Operating advanced function
4. Set the hour by pressing the Up or Down button.
The ‘hour’ indicator will blink. Set the hour and press
Set button to save the setting.
5. Set the minute by pressing the Up or Down button.
ENGLISH
The ‘minute’ indicator will blink. Set the minute and
press Set button to save the setting.
6. Confirm the Schedule.
After step 5, all indicators are blinking except
“Reservation No”, “Daily”. Then press Set button.
• On this step, you can only use Set or Cancel/Delete button.
• If there is a reservation on same day and time, it will not be confirmed and
“Not Available” indicator will blink for 3 seconds. In this case, go back to the step 4.
Viewing the Daily Schedule (On / Off) Display
On Reservation
Off Reservation
Operating advanced function _27
Operating advanced function
SETTING THE DAILY SCHEDULE
Deleting the daily schedule
1. Select the schedule from Reservation View Mode.
2. Push the Cancel/Delete button for 3 seconds.
3. The LCD pictures change to the reservation mode after deleting the schedule.
Operating the daily schedule
1. Operate automatically according to schedule.
2. If On schedule starts during the Urgent DHW mode, the Urgent DHW mode will be turned
off.
In the following conditions, the schedule function will not operate.
• Outing
• Tracking of communication
• Installation of room thermostat
• If the field setting is set for without DHW or another manufacturers tank is used, its not
possible to reserve DHW mode.
• If the field setting is set for not using the booster heater, its not possible to reserve Pwr
DHW mode.
28_ Operating advanced function
FIELD SETTING MODE
Setting the Field Setting Value of wired remote controller
Sub menu
Main menu
Adjusting filed setting values is available in the unit operation.
Default field setting value and range is on 32~34 pages.
1. Press the Test button for 5 seconds.
The mode changes to the field setting.
In this mode, you can only use Up, Down, Set,
Cancel/Delete button.
To cancel the setting, press Cancel/Delete button.
2. Set the Main Menu by pressing Up or Down
button.
The “Number” will blink. Set the Main menu and press
Set button to save the setting.
3. Set the Sub Menu by pressing Up or Down button.
The “Number” will blink. Set the Sub menu by pressing
Up or Down button. Then press Set button to save
the setting.
4. Set the Operation Range(Field Setting) by pressing
Up or Down button.
The digits in “Temp” category will blink. Set the Field
Setting Value by pressing Up or Down button.
Then press Set button to save the settings.
After 5 seconds, The LCD shall go back to initial display.
If no input for setting value changes, the LCD shall go
back to initial display after 30 seconds.
Operating advanced function _29
ENGLISH
Field setting mode is to adjust specific functions in accordance with customer’s demands.
Field setting mode is easy-to-access and programmable by the wired remote controller of hydro
unit.
Field setting values are consisted of 4 digits.
Operating advanced function
FIELD SETTING MODE
Field Setting Value(FSV) Table
• Code 10✴✴ : Upper and lower temperature limits of each operation mode of wired remote controller
Heating(Water Out, Room), Cooling(Water Out, Room), DHW(Tank)
• Code 20✴✴ : Water law design and external room thermostat
Heating(2 WL’s for floor & FCU), Cooling(2 WL’s for floor & FCU), WL & Thermostat
types
Field Setting Value
Main Menu &
Sub Menu Function
Code
Remote
Water Out Temp for Cooling
Controller
Setting Range
Room Temp for Cooling
Code 10✴✴
Water Out Temp for Heating
Room Temp for heating
DHW Tank Temp
Water Law
Code 20✴✴
Outdoor Temp for Water Law
(Heating)
Water Out Temp for WL1 Heating
(WL1-Floor)
Water Out Temp for WL2 Heating
(WL2-Fan Coil Unit)
Heating Water Law for Auto Mode
Outdoor Temp for Water Law
(Cooling)
Water Out Temp for WL1 Cooling
(WL1-Floor)
Water Out Temp for WL2 Cooling
(WL2-Fan Coil Unit)
Cooling Water Law for Auto Mode
External Thermostat Application
30_ Operating advanced function
Description
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Point ➀
Point ➁
Point ➀
Point ➁
Point ➀
Point ➁
WL Type
Point ➀
Point ➁
Point ➀
Point ➁
Point ➀
Point ➁
WL Type
#1(Floor)
#2(FCU)
Sub
Code
✴✴11
✴✴12
✴✴21
✴✴22
✴✴31
✴✴32
✴✴41
✴✴42
✴✴51
✴✴52
✴✴11
✴✴12
✴✴21
✴✴22
✴✴31
✴✴32
✴✴41
✴✴51
✴✴52
✴✴61
✴✴62
✴✴71
✴✴72
✴✴81
✴✴91
✴✴92
Default
Min
Max
Step
Unit
25
16
30
18
55
25
30
16
50
40
-10
15
40
25
50
35
1(WL1)
30
40
25
18
18
5
1(WL1)
0(No)
0(No)
18
5
24
18
37
15
24
16
50
30
-20
10
40
17
40
17
1
25
35
18
5
18
5
1
0
0
25
18
30
22
55
37
30
22
70
40
5
20
55
37
55
37
2(WL2)
35
45
25
18
25
18
2(WL2)
1(Yes)
1(Yes)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
-
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
-
• Code 30✴✴ : User’s options for domestic hot water(DHW) tank heating
3011 : Application of DHW tank in user’s system
302✴ : Heat pump variables for tank temp. control and combination with booster heater
303✴ : Booster heater variables for combination with heat pump
304✴ : Periodical disinfection heating of water tank
ENGLISH
305✴ : Off timer for power DHW mode by hot key of wired remote controller
3061 : Combination of external field solar panel for with heat pump for DHW heating
Main Menu &
Sub Menu Function
Code
DHW
Domestic Hot Water
Tank
Code 30✴✴
Heat Pump
Booster Heater
Disinfection
Power DHW by User
Input
Solar Panel
Field Setting Value
Sub
Code
Description
Default
Min
Max
Step
Unit
1(Yes)
-
-
Application
✴✴11
0(No)
0
Max Temp
Stop
Start
Min Operation
Max Operation
Interval
Application
Delay Time
Overshoot
Compensation Temp
Application
Interval
Start Time
Target Temp
Duration
Timer OFF Function
Timer Duration
H/P Combination
✴✴21
✴✴22
✴✴23
✴✴24
✴✴25
✴✴26
✴✴31
✴✴32
✴✴33
✴✴34
✴✴41
✴✴42
✴✴43
✴✴44
✴✴45
✴✴51
✴✴52
✴✴61
50
2
5
5
30
3
1(On)
20
0
10
1(On)
Fri
23
70
10
0(Off)
60
0
45
2
1
0
5
0
0(OFF)
20
0
0
0(OFF)
Mon
0
40
5
0
30
0
55
1
˚C
10
1
˚C
20
1
˚C
20
1
min
95
5
min
10
0.5 hour
1
95
5
min
4
1
˚C
20
1
˚C
1
Sun 1(All) day
23
1 o'clock
70
5
˚C
60
5
min
1(On)
300
10
min
1(Yes)
-
Operating advanced function _31
Operating advanced function
FIELD SETTING MODE
Field Setting Value(FSV) Table
• Code 40✴✴ : User’s options for heating devices including internal backup heater and external boiler
401✴ : Space/DHW heating priority and control variables
402✴ : Backup/Booster heater priority and control variables
403✴ : Additional backup boiler operating variables
• Code 50✴✴ : User’s options for extra functions
501✴ : New target temperatures of each mode by “Outgoing” hot key of remote controller
5021 : Temperature difference between before & after values in “Economic” DHW mode
503✴ : Time-division multi(TDM) variables for combining operation b/w A2A and A2W
Field Setting Value
Main Menu &
Sub Menu Function
Code
Heating
Heat Pump
Code 40✴✴
Backup Heater
Backup Boiler
Others
Outing
Code 50✴✴
DHW Saving Mode
TDM Variable
Description
Heating/DHW Priority
Outdoor Temp for Priority
Heating Off
Overshoot
Application
BUH/BSH Priority
For back-up use only
Threshold Temp
Application
Boiler Priority
Threshold Temp
Water Out Temp for
Cooling
Room Temp for Cooling
Water Out Temp for
Heating
Room Temp for Heating
Auto Cooling WL1 Temp
Auto Cooling WL2 Temp
Auto Heating WL1 Temp
Auto Heating WL2 Temp
Target Tank Temp
Temp Difference
A2A Max Operation Time
A2W Min Operation Time
32_ Operating advanced function
Sub
Code
✴✴11
✴✴12
✴✴13
✴✴14
✴✴21
✴✴22
✴✴23
✴✴24
✴✴31
✴✴32
✴✴33
Default
Min
Max
0(DHW)
0
1(Heating)
0
-15
20
25
14
35
2
1
4
1(On) 0(Off)
1
0(Both)
0
2(BSH)
1(On) 0(Off)
1
0
-15
35
0(No)
0
1(Yes)
0(Off)
0
1(On)
-15
-20
5
Step Unit
1
1
1
1
1
1
˚C
˚C
˚C
˚C
˚C
✴✴11
25
5
25
1
˚C
✴✴12
30
18
30
1
˚C
✴✴13
25
15
55
1
˚C
✴✴14
✴✴15
✴✴16
✴✴17
✴✴18
✴✴19
✴✴21
✴✴31
✴✴32
16
25
25
15
15
30
5
30
3
16
5
5
15
15
30
0
5
0
30
25
25
55
55
70
40
60
10
1
1
1
1
1
1
1
5
1
˚C
˚C
˚C
˚C
˚C
˚C
˚C
min
min
Remote Controller Setting Range : Code 10✴✴
Field Setting Value
Code 10✴✴
Water Out Temp for Heating
Room Temp for heating
DHW Tank Temp
Description
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Sub
Code
✴✴11
✴✴12
✴✴21
✴✴22
✴✴31
✴✴32
✴✴41
✴✴42
✴✴51
✴✴52
Default
Min
Max
Step
Unit
25
16
30
18
55
25
30
16
50
40
18
5
24
18
37
15
24
16
50
30
25
18
30
22
55
37
30
22
70
40
1
1
1
1
1
1
1
1
1
1
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
Space Cooling
• Target water outlet temperature : Upper limit(#1011, Default 25ºC, Range : 18 ~ 25ºC),
Lower limit(#1012, Default 16ºC, Range : 5 ~ 18ºC)
- With this default FSV settings, user can change the target water outlet temperature within
the range of 5 ~ 25ºC for cooling
• Target room temperature : Upper limit(#1021, Default 30ºC, Range : 24 ~ 30ºC),
Lower limit(#1022, Default 18ºC, Range : 18 ~ 22ºC)
- With this default FSV settings, user can change the target room temperature within the
range of 18 ~ 30ºC for cooling.
• The #1 DIP switch in the wired remote controller should be set to “OFF”(Default) for
cooling operation of heat pump.
• The #2 DIP switch in the wired remote controller should be set to “OFF”(Default) to
control the water outlet temperature.
• The #2 DIP switch in the wired remote controller should be set to “ON” to control the
room temperature.
• The #3 DIP switch in the wired remote controller should be set to “OFF”(Default) to
control the air sensor in remote controller.
• The #3 DIP switch in the wired remote controller should be set to “ON” to control the
external air sensor.
Space Heating
• Target water outlet temperature : Upper limit(#1031, Default 55ºC, Range : 37 ~ 55ºC),
Lower limit(#1032, Default 25ºC, Range : 15 ~ 37ºC)
- With this default FSV settings, user can change the target water outlet temperature within
the range of 25 ~ 55ºC for heating.
• Target room temperature : Upper limit(#1041, Default 30ºC, Range : 24 ~ 30ºC),
Lower limit(#1042, Default 16ºC, Range : 16 ~ 22ºC)
- With this default FSV settings, user can change the target room temperature within the
range of 16 ~ 30ºC for heating.
• The #2 DIP switch in the wired remote controller should be set to “OFF”(Default) to
control the water outlet temperature.
• The #2 DIP switch in the wired remote controller should be set to “ON” to control the
room temperature.
DHW Heating
• Target DHW tank temperature : Upper limit(#1051, Default 50ºC, Range : 50 ~ 80ºC),
Lower limit(#1052, Default 40ºC, Range : 30 ~ 40ºC)
- With this default FSV settings, user can change the target tank temperature within the
range of 40 ~ 50ºC for DHW heating.
The FSV #3011 in the wired remote controller should be set to “1(Yes)” to use DHW
function.
Operating advanced function _33
ENGLISH
Main Menu &
Sub Menu Function
Code
Remote
Water Out Temp for Cooling
Controller
Setting Range Room Temp for Cooling
Operating advanced function
FIELD SETTING MODE
Water Law & Room Thermostat : Code 20✴✴
①
Ts
#2021/2031
②
#2022/2032
#2061/2071
②
#2062/2072
Heating WL
Floor FCU
#2011
Main Menu &
Code
Water Law
Code 20✴✴
#2012
Ts : Target Temp.
Ta : Ambient Temp.
Cooling WL
①
#2051
Shift Value
����������
#2052
������������������������������
Field Setting Value
���������������������������������������������������
Sub
Sub Menu Function
Description
Default
Code
✴✴11
-10
Outdoor Temp for Water Law
Point ➀
(Heating)
✴✴12
15
Point ➁
✴✴21
40
Water Out Temp for WL1 Heating
Point ➀
(WL1-Floor)
✴✴22
25
Point ➁
✴✴31
50
Water Out Temp for WL2 Heating
Point ➀
(WL2-Fan Coil Unit)
✴✴32
35
Point ➁
✴✴41 1(WL1)
Heating Water Law for Auto Mode
WL Type
Outdoor Temp for Water Law
✴✴51
30
Point ➀
(Cooling)
✴✴52
40
Point ➁
✴✴61
25
Water Out Temp for WL1 Cooling
Point ➀
(WL1-Floor)
✴✴62
18
Point ➁
✴✴71
18
Water Out Temp for WL2 Cooling
Point ➀
(WL2-Fan Coil Unit)
✴✴72
5
Point ➁
✴✴81 1(WL1)
Cooling Water Law for Auto Mode
WL Type
#1(Floor)
✴✴91
0(No)
External Thermostat Application
#2(FCU)
✴✴92
0(No)
Ta
Min
Max
Step
Unit
-20
10
40
17
40
17
1
25
35
18
5
18
5
1
0
0
5
20
55
37
55
37
2(WL2)
35
45
25
18
25
18
2(WL2)
1(Yes)
1(Yes)
1
1
1
1
1
1
1
1
1
1
1
1
-
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
˚C
-
Water Law for Heating
• Outdoor air temperature range : Lower limit ➀(#2011, Default -10˚C, Range : -20 ~ 5˚C),
Upper limit ➁(#2012, Default 15˚C, Range : 10 ~ 20˚C)
- With this default settings, the water outlet temperature by heating water law can be
changed within the outdoor temperature range of -10 ~ 15˚C.
• Water out temperature range for floor/FCU applications respectively :
Upper limit ➀(#2021/2031, Default 40/50˚C, Range : 40 ~ 55˚C), Lower limit ➁(#2022/2032,
Default 25/35˚C, Range : 17 ~ 37˚C)
- With this default settings, the water outlet temperature by heating water law can be
changed within the range of 25/35 ~ 40/50˚C.
• Type of water law for according to heating devices(floor/FCU) : #2041(Default “1”(WL1 for
floor)), “2”(WL2 for FCU or radiator)
• The #2 DIP switch in the wired remote controller should be set to “OFF”(Default) to
control the water outlet temperature.
• The operation mode of the wired remote controller should be set to “AUTO”( ) to use
the weather dependent water law scheme.
34_ Operating advanced function
Water Law for Cooling
• The #1 DIP switch in the wired remote controller should be set to “OFF”(Default) for
cooling operation of heat pump.
• The #2 DIP switch in the wired remote controller should be set to “OFF”(Default) to
control the water outlet temperature.
• Only heating WL operation could be used through “Auto” mode of wired remote
controller.
External Room Thermostat (Field Option)
• Terminal #1(#2091, Default “0” for no usage), #2(#2092, Default “0” for no usage)
- To use wired remote controller for heating/cooling operation, both of the above settings
should be set to “0” simultaneously. If not, thermostat controls system.
- Types of water law used by room thermostat operation will follow the FSV settings defined
in #2041(heating) and #2081(cooling) respectively.
- During the thermostat operation, the user has the possibility to shift up or down the target
water temperature within the range of -5 ~ +5˚C.
Operating advanced function _35
ENGLISH
• Outdoor air temperature range : Lower limit ➀(#2051, Default 30˚C, Range : 25 ~ 35˚C),
Upper limit ➁(#2052, Default 40˚C, Range : 35 ~ 45˚C)
- With this default settings, the water outlet temperature by cooling water law can be
changed within the outdoor temperature range of 30 ~ 40˚C.
• Water out temperature range for floor/FCU applications respectively :
Upper limit ➀(#2061/2071, Default 25/18˚C, Range : 18 ~ 25˚C), Lower limit ➁(#2062/2072,
Default 18/5˚C, Range : 5 ~ 18˚C)
- With this default settings, the water outlet temperature by cooling water law can be
changed within the range of 18/5 ~ 25/18˚C.
• Type of water law for according to cooling devices(floor/FCU) :
#2081(Default “1”(WL1 for floor), “2”(WL2 for FCU or radiator)
Operating advanced function
FIELD SETTING MODE
DHW Heating : Code 30✴✴
TU > THP MAX
TU < THP MAX
T(C)
T(C)
Tu : User set temp.
T(C) : Temp. (Celcius)
TU
#3021
THP MAX
THP OFF
#3022
#3021
TU=THP OFF
#3023
THP ON
Heating
request
DHW
request
DHW(H/P)
operation
THP MAX
#3023
THP ON
1
0
1
0
1
0
#3024
#3025
Main Menu &
Sub Menu Function
Code
DHW
Domestic Hot Water
Tank
Code 30✴✴
Heat Pump
Booster Heater
Disinfection
Power DHW by User
Input
Solar Panel
t
#3026
Field Setting Value
Sub
Description
Code
Default
Min
Max
Step
Unit
0
1(Yes)
-
-
Application
✴✴11
0(No)
Max Temp
Stop
Start
Min Operation
Max Operation
Interval
Application
Delay Time
Overshoot
Compensation Temp
Application
Interval
Start Time
Target Temp
Duration
Timer OFF Function
Timer Duration
H/P Combination
✴✴21
✴✴22
✴✴23
✴✴24
✴✴25
✴✴26
✴✴31
✴✴32
✴✴33
✴✴34
✴✴41
✴✴42
✴✴43
✴✴44
✴✴45
✴✴51
✴✴52
✴✴61
50
2
5
5
30
3
1(On)
20
0
10
1(On)
Fri
23
70
10
0(Off)
60
0(No)
36_ Operating advanced function
45
55
1
˚C
2
10
1
˚C
1
20
1
˚C
0
20
1
min
5
95
5
min
0
10
0.5 hour
0(Off)
1
20
95
5
min
0
4
1
˚C
0
20
1
˚C
0(Off)
1
Mon Sun 1(All) day
0
23
1 o'clock
40
70
5
˚C
5
60
5
min
0
1
30
300
10
min
0(No) 1(Yes)
-
DHW Application
The FSV #3011 in the wired remote controller should be set to “1(Yes)” to use DHW function.
Heat Pump Variables for Controlling DHW Tank
The FSV #4011 for DHW priority should be set to “0(DHW)”(Default) for the mode timer
action as mentioned above.
If not, the space heating mode by heat pump has a priority over the DHW heating mode
under the specified low outdoor temperature(#4012).
Operating advanced function _37
ENGLISH
• Maximum DHW tank temperature with R410A(refrigerant) heat pump operation :
FSV #3021, Default 50˚C, Range : 45 ~ 55˚C.
• Temperature difference determining the heat pump OFF temperature :
FSV #3022, Default 2˚C, Range : 2 ~ 10˚C.
• Temperature difference determining the heat pump ON temperature :
FSV #3023, Default 5˚C, Range : 1 ~ 20˚C.
• DHW heating mode timer : If there is simultaneous requests of space heating/cooling and
DHW heating, this mode timer will toggle operation modes.
- FSV #3024(minimum DHW operating time, Default 5 min., Range 0 ~ 20 min.),
#3025(maximum DHW time, Default 30 min., Range 5 ~ 95 min.), #3026(time interval
between two consecutive DHW mode operations, Default 3 hour, Range 0 ~ 10 hour)
Operating advanced function
FIELD SETTING MODE
DHW Heating : Code 30✴✴
1
Heating
request
0
1
DHW
request
0
#3025
1
H/P
operation
0
1
Booster
operation
0
t
#3032
#3033
TBH OFF
TBH ON
TU
THP MAX
THP OFF
THP ON
#3022
#3023
HP
BH
HP
t
#3045
#3044
TH
TU
00.00
01.00
22.00
23.00
#3043
38_ Operating advanced function
24.00
t
Booster Heater Variables for Controlling DHW Tank
The FSV #4022 for booster heater priority should be set to “0(both)”(Default) or
“2”(booster) to use booster heater.
If not(backup heater priority), the booster heater can be operated in case of no backup
heater demand.
Disinfection Function
• The FSV #3041 should be set to “1(On)”(Default) to use disinfection function.
- Scheduling : Day(#3042, Default “Friday”), starting time(#3043, Default “23:00”),
target tank temp. (#3044, Default “70˚C”), duration(#3045, Default 10 min.)
Disinfection function can be performed only with Samsung’s DHW tank installation.
Urgent DHW by User’s Input (Hot Key of Wired Remote Controller)
• By default setting(#3061, Default “0(Off)”, Urgent DHW heating will not be turned off
automatically before user’s additional key input. If you want to quit urgent DHW function after
a certain amount of duration time(#3052, Default “60 min.”, Range 30 ~ 300 min.), change
the FSV #3051 to “1(On)”.
Additional Solar Panel Installation for DHW with Heat Pump (Field Option)
• By default setting(#3051, Default “1(Yes)”, the DHW heating by solar panel has a priority over
the heat pump operation in case of solar panel installation.
Operating advanced function _39
ENGLISH
• The FSV #3031 should be set to “1(On)”(Default) to use booster heater as an additional heat
source for DHW tank.
• Booster heater startup delay timer : In case of DHW request, this timer will delay the
operation of booster heater compared to heat pump.
- FSV #3032(Default 20 min., Range 20 ~ 95 min.), In “Power” DHW mode, the delay timer
will be neglected, and the booster starts immediately.
- In “Economic” DHW mode, the DHW heating will be conducted only with heat pump.
- #3032 should be smaller than the maximum H/P time(#3025). If the delay time is set too
high, it might take very long time for DHW heating.
• Temperature difference determining the booster heater OFF temperature(T_BH OFF = Tu +
#3033) : FSV #3033, Default 0˚C, Range : 0 ~ 4˚C.
- Temperature difference determining the booster heater ON temperature(T_BH ON = T_BH
OFF - 2)
• DHW compensation temperature in case of space heating/cooling priority : FSV #3034 will
be explained in next page.
Operating advanced function
FIELD SETTING MODE
Space Heating : Code 40✴✴
Ts
Tu
DHW by Booster Heater Only
#3034
Ta
#4012
Field Setting Value
Main Menu &
Sub Menu Function
Code
Heating
Heat Pump
Code 40✴✴
Backup Heater
Backup Boiler
Description
Heating/DHW Priority
Outdoor Temp for Priority
Heating Off
Overshoot
Application
BUH/BSH Priority
For back-up use only
Threshold Temp
Application
Boiler Priority
Threshold Temp
Sub
Code
✴✴11
✴✴12
✴✴13
✴✴14
✴✴21
✴✴22
✴✴23
✴✴24
✴✴31
✴✴32
✴✴33
Default
Min
Max
0(DHW)
0
1(Heating)
0
-15
20
25
14
35
2
1
4
1(On) 0(Off)
1
0(Both)
0
2(BSH)
1(On) 0(Off)
1
0
-15
35
0(No)
0
1(Yes)
0(Off)
0
1(On)
-15
-20
5
Step Unit
1
1
1
1
1
1
˚C
˚C
˚C
˚C
˚C
Heat Pump Variables for Space Heating
• FSV #4011 for DHW priority is set to “0(DHW)”(Default) for the first time. In case of
“1(Heating)”, the space heating by heat pump has a priority over the DHW heating by heat
pump under the low outdoor temperature condition(#4012).
• DHW compensation temperature in case of space heating priority:
At low outdoor temperature, the target temperature of DHW tank will be increased by the
temperature difference defined in FSV #3034 to compensate the relatively cold water stored
in DHW tank. In this case, the only heat source for DHW tank would be booster heater
inside tank, so the lower part of water stored in tank could be cold due to “No operation of
heat pump”. The corrected (higher) set point will make sure that the total heat capacity of
the water in the tank remains approximately unchanged, by compensating for the colder
bottom water layer of the tank (because the heat exchanger coil is not operational) with a
warmer top layer.
• Space heating off temperature(FSV #4013, Default “25˚C”, Range 14 ~ 35˚C):
At high outdoor temperature above this value, the space heating will be turned off, to avoid
overheating.
• Overshoot temperature(FSV #4014, Default “2˚C”, Range 1 ~ 4˚C): N/A yet
40_ Operating advanced function
Backup Heater Variables for Space Heating
To use both heaters together at the same time, please check the capacity of the power
circuit breaker of your house before.
External Backup Boiler for Space Heating (Field Option)
• The FSV #4031 should be set to “1(Yes)” to use a backup boiler as an additional heat
source. By default option(“0(No)), no installation.
• Under the installation of backup boiler in your house, you can freely choose the boiler
priority(FSV #4032, Default “0(Off)”).
• To compensate the lowered heat pump heating performance under very cold weather
conditions, the backup boiler will be operating instead of heat pump under the threshold
temperature(FSV #4033, Default “-15˚C”, Range -20 ~ 5˚C).
Operating advanced function _41
ENGLISH
• The FSV #4021 should be set to “1(On)”(Default) to use 2-stage electric backup heater in
hydro unit as an additional heat source.
• To compensate the lowered heat pump heating performance under very cold weather
conditions, the FSV #4023 should be set to “1(On)”(Default).
- The threshold temperature to use backup heater for cold weather compensation:
FSV #4024, Default “0˚C”, Range -15 ~ 35˚C
- Above the threshold temperature, the backup heater usage is restricted to save energy
consumption.
• The FSV #4022 for backup heater priority should be set to “0(both)”(Default) or “1”(backup)
to use backup heater. If not(booster heater priority), the backup heater can be operated in
case of no booster heater demand.
Operating advanced function
FIELD SETTING MODE
Others : Code 50✴✴
Field Setting Value
Main Menu &
Sub Menu Function
Code
Others
Outing
Code 50✴✴
DHW Saving Mode
TDM Variable
Description
Water Out Temp for
Cooling
Room Temp for Cooling
Water Out Temp for
Heating
Room Temp for Heating
Auto Cooling WL1 Temp
Auto Cooling WL2 Temp
Auto Heating WL1 Temp
Auto Heating WL2 Temp
Target Tank Temp
Temp Difference
A2A Max Operation Time
A2W Min Operation Time
Sub
Code
Default
✴✴11
✴✴12
Min
Max
Step Unit
25
5
25
1
˚C
30
18
30
1
˚C
✴✴13
25
15
55
1
˚C
✴✴14
✴✴15
✴✴16
✴✴17
✴✴18
✴✴19
✴✴21
✴✴31
✴✴32
16
25
25
15
15
30
5
30
3
16
5
5
15
15
30
0
5
0
30
25
25
55
55
70
40
60
10
1
1
1
1
1
1
1
5
1
˚C
˚C
˚C
˚C
˚C
˚C
min
min
Outing Mode (Hot Key of Wired Remote Controller)
• All the target temperatures(both water outlet and room) for space heating/cooling/
auto(water-law) modes and the target tank temperature for DHW heating mode will be
changed to the values defined in the table above to save energy consumption during the
vacancy of house.
With the lowered target temperatures(FSV #5011 ~ #5019), the system will be operated
normally.
Economic DHW Heating
• Which is heat pump only, saving energy consumption. A target temperature of DHW shall be
lowered as much as Users set with field setting values stored in wired remote controller.
- New target DHW tank temperature will be the value subtracted the difference(#5021) from
the present user’s setting.
TDM(Time-Division Multi) Variables
• Under the installation of both A2A(Air-To-Air type air conditioner) and A2W(Air-To-Water
type hydro unit) at the same time, our outdoor machine can supply its full capacity to the
operating indoor machines(including A2A and A2W). If there are simultaneous operating
demands from many A2A machines with A2W, the priority of controlling the outdoor
machine(ex: compressor frequency) will be given to A2A, because of their fast response for
use’s comfort. Only the remaining capacity of outdoor machine will be given to A2W during
A2A’s normal operation. In this case, it might take very long time for A2W heating, so the
outdoor machine will alternate the controlling priorities between A2A and A2W with time
basis.
• A2A maximum operation time: FSV #5031(Default “30 min.”, Range 5 ~ 60 min.), After
this maximum time, the outdoor machine will operate only for A2W to speed up the A2W’s
heating/cooling performance, even though there are A2A’s continuous operation demands.
• A2W minimum operation time: FSV #5032(Default “3 min.”, Range 0 ~ 10 min.), in this
minimum time, the outdoor machine will operate only for A2W, even though there are no
more A2W’s continuous operation demands.
42_ Operating advanced function
Appendix
TEMPERATURE TABLE
Mode
Display
Setting range
Set View Default
Available
Target temperature
Setting
method
Control
method
Leaving water
O
O
16~25˚C
• Min : 5~18˚C
• Max : 18~25˚C
-50~94˚C Up/Down
Hydro or
Indoor unit
Room
O
O
18~30˚C
• Min : 18~22˚C
• Max : 24~30˚C
-50~94˚C Up/Down
Indoor unit
Leaving water
O
O
25~55˚C
• Min : 15~37˚C
• Max : 37~55˚C
-50~94˚C Up/Down
Hydro or
Indoor unit
Room
O
O
16~30˚C
• Min : 16~22˚C
• Max : 24~30˚C
-50~94˚C Up/Down
Indoor unit
Outdoor
X
X
30~40˚C
• Min : 25~35˚C
• Max : 35~45˚C
-50~94˚C
Leaving water
(WL1-Floor)
X
X
25~18˚C
• Min : 18~25˚C
• Max : 5~18˚C
-50~94˚C
Leaving water
(WL2-FCU)
X
X
18~5˚C
• Min : 18~25˚C
• Max : 5~18˚C
-50~94˚C
Outdoor
X
X
-10~15˚C
• Min : -20~5˚C
• Max : 10~20˚C
-50~94˚C
-50~94˚C
• Min : 40~55˚C
• Max : 17~37˚C
-50~94˚C
Cooling
Heating
Cooling
Water
Law
Heating
Leaving water
(WL1-Floor)
X
X
• Min : 40~55˚C
40~25˚C
• Max : 17~37˚C
Leaving water
(WL2-FCU)
X
X
50~35˚C
O
X
-5~5˚C
Temperature Shifting
DHW
Current
display
DHW tank
Outdoor temperature
O
O
X
O
Default
-
• Min : 30~40˚C
40~50˚C
• Max : 50~65˚C
-
-
Field
Setting
Mode
Hydro unit
or
Thermostat
SET/VIEW (Th-1 : Floor,
Th-2 : FCU)
mode
Up/Down
Hydro unit
-50~94˚C Up/Down
Hydro unit
-50~94˚C
-
DIP SWITCH SETTING
S/W
OFF (Default)
ON
S/W #1
Heating and Cooling
Heating only
S/W #2
Target temp : Water outlet Temp.
S/W #3
Air sensor in remote controller
S/W #4
No Use
No Use
S/W #5
No Use
No Use
S/W #6
No Use
No Use
S/W #7
No Use
No Use
S/W #8
No Use
No Use
Target temp : Indoor air Temp.
External air sensor
Appendix _43
ENGLISH
Available operation range
Appendix
MAINTAINING THE UNIT
Maintenance activities
• In order to ensure optimal availability of the unit, a number of checks and inspections on the
unit and the field wiring have to be carried out at regular intervals, preferably yearly.
This maintenance should be carried out by SAMSUNG local technician. Besides keeping the
remote controller clean by means of a soft damp cloth, no maintenance is required by the
operator.
WARNING
During longer periods of standstill, e.g. during summer with a heating only application,
it is very important NOT TO SWITCH OFF THE POWER SUPPLY towards the unit.
Switching off the power supply stops the automatic repetitive movement of the motor in
order to prevent it from getting jammed.
This product contains fluorinated greenhouse gases covered by the Kyoto
Protocol.
Refrigerant type: R410A
GWP(1) value: 1975 (GWP = global warming potential)
• Periodical inspections for refrigerant leaks may be required depending on European or local
legislation. Please contact your local dealer for more information.
44_ Appendix
TROUBLESHOOTING TIPS
If the unit has some problem to work properly, the LED on hydro unit will flash and some error codes
will be displayed on the controller.
The following table described the explanation of error codes on the LCD display.
Thermistor
Check its resistance. 10kohm @ 24°C(Hydro unit), 220kohm@24°C(DHW Tank, Solar)
Check its location as shown at the diagram.
Check its contact status with pipe.
Final solution is to change parts.
Display
ENGLISH
•
•
•
•
Explanation
EVA Inlet thermistor SHORT or OPEN
EVA Outlet thermistor SHORT or OPEN
Wired remote controller thermistor SHORT or OPEN
FRAM Read/Write Error(Wired remote controller data error)
Water Inlet thermistor SHORT or OPEN
Water Outlet thermistor SHORT or OPEN
PHE thermistor SHORT or OPEN
Water TANK thermistor SHORT or OPEN
E903
PHE
thermistor
Water
outlet
Tw3
E902
Tw2
Tr1
EVA inlet
E122
Wired remote controller
thermistor
E653
Ref' In
Ref' Out
EVA outlet
E123
Water inlet
E901
Tr2
Tw1
Water Out
Water In
Water tank
thermistor
E904
Appendix _45
Appendix
TROUBLESHOOTING
Communication
Display
Explanation
Abnormal communication B/W Wired remote controller & Hydro unit
Communication tracking error B/W Wired remote controller & Hydro unit
FRAM Read/Write Error(Wired remote controller data error)
E601, E604
E654
• Wrong data transmit B/W micom & IC07(eeprom)
46_ Appendix
Water pump & Flow S/W
Display
Explanation
Flow S/W OFF error (In case of flow S/W OFF in 10s during water pump signal is ON)
Flow S/W OFF error (In case of flow S/W ON in 10s during water pump signal is OFF)
ENGLISH
Tw2
Tw3
Tr1
Ref' In
Ref' Out
Tr2
Tw1
Water Out
Water In
E911
• Water pump OFF ( Flow S/W on )
E912
• Water pump ON ( Flow S/W off )
>12 LPM(NH080PHXEA)
Water flow(>12LPM)
Water
flow >16 LPM(NH160PHXEA)
• Water pump ON ( Flow S/W off ) : NOT enough water flow
>12 LPM(NH080PHXEA)
Water
flow >16 LPM(NH160PHXEA)
Water flow(>12LPM)
Appendix _47
Appendix
DISPOSAL REQUIREMENTS
• Dismantling of the unit, treatment of the refrigerant, of oil and of other parts must be done in
accordance with relevant local and national legislation.
• Your product is indicated with this symbol. This means that electrical and electronic products shall
not be mixed with unsorted household waste.
• Do not try to dismantle the system yourself: the dismantling of the system,
treatment of the refrigerant, of oil and other parts must be done by a qualified
installer in accordance with relevant local and national legislation.
• Units must be treated at a specialized treatment facility for re-use, recycling and recovery.
By ensuring this product is disposed off correctly, you will help to prevent potential negative
consequences for the environment and human health. Please contact the installer or local authority
for more information.
48_ Appendix
Memo
ENGLISH
Memo _49
Memo
50_Memo
Memo
ENGLISH
Memo _51