R-Tech P100HF Technical data

3M Occupational Health and Environmental Safety Division
Products and Services for Worker Safety
Solutions
for
Worker Safety
*3M Respirators and Hearing Protection Products –
Exclusive NASCAR Officially Licensed Products
3M.com/OccSafety/WorkerSafety
Helping to protect your health with reliable,
comfortable products and technical support.
*
**
© 3M 2009. All rights reserved.
3
Table of Contents
Filtering Facepiece Particulate Respirators............................................................... 1
Half Facepiece Respirators 5000 Series.................................................................. 7
Half and Full Facepiece Respirators 6000, 7000, and FF-400 Series....................... 9
Personal Air Monitoring Systems............................................................................11
Portable Gas Detectors...........................................................................................12
Fixed Gas Detection................................................................................................13
Powered and Supplied Air Respirators....................................................................14
Powered and Supplied Air Headgear.......................................................................15
L-Series Spare Parts and Accessories.....................................................................17
GVP-Series Belt-Mounted Systems PAPRs — Product Matrix................................ 19
Air-Mate™ or High Efficiency
Belt-Mounted Systems PAPRs — Product Matrix.................................................. 20
Breathe Easy™ Belt-Mounted Systems PAPRs — Product Matrix........................... 21
ClearVisor with Adflo™ Systems PAPRs.................................................................. 23
Airstream™ Helmet-Mounted Systems PAPRs........................................................ 24
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Table of Contents
Supplied Air Respirators — Product Matrix .......................................................... 25
Full Facepiece Respirators for Powered
and Supplied Air Systems — Product Matrix......................................................... 28
Products and Services for First Responders........................................................... 29
Hearing Protection................................................................................................. 31
Eye Protection....................................................................................................... 35
Head and Face Protection...................................................................................... 38
Peltor Communications.......................................................................................... 39
Fall Protection........................................................................................................ 41
Speedglas™ Auto-Darkening Filters and Helmets................................................... 47
Speedglas™ with Adflo™ Eye, Face and Respiratory Protection............................... 51
Sorbents................................................................................................................ 54
Software, Fit Test Kits and Training Information..................................................... 55
Respirator Medical Evaluations.............................................................................. 56
Warnings............................................................................................................... 60
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Filtering Facepiece Respirators
Featured Technologies
Cool Flow™ Exhalation Valve. Patented
one-way valve for easy exhalation and
cool, dry comfort.
M-noseclip. Patented noseclip adjusts
easily for fewer pressure points and
greater comfort.
Faceseal. Soft and secure, conforms
closely to face for additional comfort.
Features
From foundries to wood working, workers in many industries
Advanced Electret Media. Patented filter
Sweeping, sanding, grinding, sawing, bagging, welding –
media with electrostatically charged
microfibers help make breathing easier
and cooler.
each creates a unique set of conditions, especially given
Carbon filter material. Carbon Filter
environmental considerations such as heat and humidity.
Media provides relief against odors,
vapors and other gaseous contaminants
for greater wearer comfort. For nuisance
level relief only.¹
require protection from airborne particles and mists.
3M’s wide selection of filtering facepiece respirators helps you
match the respirator to your environment. 3M uses a variety
of innovative technologies and features to help you meet your
protection and comfort needs. They are all NIOSH 42 CFR 84
approved and include the following features:
•Lightweight and comfortable
•Adjustable noseclips
•Variety of strap types
•Variety of strap attachments
•Some available with carbon filter material for nuisance
level relief¹
•Soft inner materials
•Compatible with most eye and hearing protection
Cake-resistant filter media. Patented filter
media with specifically designed filter
layers for welding applications provide
longer respirator life and easier breathing.
Welding Web. Unique filter media
incorporating protective layers designed
to be flame resistant as demonstrated per
ASTM D2859-96. (Not a substitute for a
faceshield.)
Adjustable buckle straps. A single tug
helps provide a comfortable, secure fit.
P-series filter. Patented Advanced
Electret Media, appropriate for prolonged
use in both oil and non-oil containing
environments.
(These featured technologies icons refer to products
on pages 3-6).
¹3M recommended for relief against nuisance level acid gas or organic vapors. Nuisance levels are less than OSHA PEL or applicable government occupational exposure
limits, whichever is lower. Do not use for respiratory protection against gases or vapors.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
1
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Product Preference Selector
Use the selector below to identify which respirator may be preferred for increased worker comfort.
What type of particles are in your environment?
Oil and Non-oil
Non-oil
R- or P-Series Respirators
N-Series Respirators
Is a P100 respirator
required or preferred?
Is this a welding application or is a
N100 respirator required or preferred?
No
Will the respirator be used for
light duty or short duration work?
Yes
No
Yes
8293
8200
Is the environment hot and humid or
is additional worker comfort desired?
Yes
N100
No
8233
Is the environment
hot and humid or is
additional worker
comfort desired?
Welding
Is ozone* protection
or nuisance level
OV relief preferred?
No
No
Is a folded product preferred?
No
Is nuisance level
OV/AG relief
preferred?
No
Yes
Yes
No
Is nuisance level
OV/AG relief
preferred?
Yes
Yes
8210/8110s 9210
No
OV
AG
OV
Yes
Is a face
seal preferred?
Is a folded
product preferred?
No
8210Plus
AG
Yes
Yes
No
8214
8514
Yes
9010
Is a faceseal preferred?
9211
Yes
8246
8576
8240
Yes
No
8212
8512
Is nuisance level AG relief preferred?
8211
8247
No
Is a faceseal preferred?
Yes
No
8516
8511
8577
8271
8515
DIDN’T FIND WHAT YOU WANT? Don’t forget that R- and P-series respirators can also be
used in non-oil environments.
*3M recommended for ozone protection up to 10X OSHA PEL. Not NIOSH approved for ozone.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
2
3M™ Filtering Facepiece
Respirators – Comfort
8200
8210
8210Plus
9210
8511
Suggested Applications: Sweeping, sanding,
grinding, sawing, bagging in a non-oil environment
Unvalved N95 Respirators
9210 (N95)
8110S (N95)
(AAD#37021)
A breakthrough in comfort and convenience.
Is designed for people with smaller
This three-panel respirator with innovative
faces. It helps provide worker protection
design helps provide comfortable, reliable
against certain non-oil based particles.
worker protection against non-oil based particles.
It is comfortable and easy to use which helps promote greater
Individually packaged
worker acceptance and increased wear time.
8210Plus (N95)
9010 (N95)
(AAD#07048)
Builds on all of the features that have
Designed to help provide quality, reliable
made the 8210 one of the most widely
worker protection against certain non-
used N95s in industry. The PLUS offers
oil based particles in a convenient, flat
comfortable braided headbands and staple free attachment.
fold design. Each respirator is individually packaged to offer
convenient storage and portability. Two strap design with
a conformable nose clip and Advanced Electret Media help
8200 (N95)
(AAD#07023)
Designed to help provide reliable
make breathing easier and cooler.
Individually packaged
protection against certain non-oil based
particles. Low priced N95 that features
Advanced Electret Media, adjustable noseclip and nose foam
to help provide a custom fit and secure seal.
Important
All 3M™ Filtering Facepieces are NIOSH approved respirators.
Before using, you must determine the following:
1.The types of contaminants for which the respirator is being
selected and exposure time.
8210 (N95)
Features Advanced Electret Media
(AEM), welded strap attachment, soft
nose foam and adjustable noseclip to
help provide a custom fit and secure seal.
2.The concentration level of the contaminant(s). Do not use for
particle concentrations that exceed 10 times the OSHA PEL or
applicable occupational exposure limit, whichever is lower.
3.Whether the respirator can be properly fitted to the wearer’s face.
Do not use with beards, or other conditions that prevent a good seal
between the face and the sealing surface of the respirator.
4.Before required use of filtering facepiece respirators, a written
respiratory protection program must be implemented, meeting
all the requirements of OSHA 29 CFR 1910.134 including medical
evaluation, training, and fit testing.
Flags denote country of manufacture, however all products may include globally
sourced components. Contact 3M for more details.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
3
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Filtering Facepiece Respirators – Comfort Plus
Suggested Applications: Grinding, bagging, sanding, sweeping, extended wear time, hot/humid conditions
and other dusty operations
Comfort Plus respirators all feature the patented 3M™ Cool Flow™ Exhalation Valve.
N95 Respirators
8511 (N95)
(AAD#07185)
Is uniquely designed to help provide
100 Class Respirators
Ideal for certain OSHA substance specific contaminants including
lead, MDA, arsenic, cadmium (excluding asbestos); additionally
for welding, pharmaceutical manufacturing
protection against certain non-oil based
8293 (P100)
particles. It is ideally suited for work
Is well suited for those who want
settings that involve heat, humidity, or long periods of wear.
NIOSHs highest rated filtration efficiency
in a maintenance free respirator. It
provides a minimum filter efficiency of 99.97% against oil
8211 (N95)
This respirator offers all the great
features of the 3M™ Particulate
based particles.
Individually packaged
Respirator 8511, plus a comfortable
foam faceseal. Is uniquely designed to help provide protection
8233 (N100)
against certain non-oil based particles.
Is well suited for those who want
Additional Applications: Cement, lime, textile, buffing
NIOSHs highest rated filtration efficiency
in a maintenance free respirator. It
9211 (N95)
provides a minimum filter efficiency of 99.97% against non-oil
(AAD#37022)
This three-panel respirator with
innovative design is ideally suited
based particles.
Individually packaged
for work settings that involve heat,
humidity, or long periods of wear.
Individually packaged
Flags denote country of manufacture, however all products may include globally
sourced components. Contact 3M for more details.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
4
3M™ Filtering Facepiece Respirators – Welding
Suggested Applications: Welding, torch cutting,
brazing, soldering
Welding respirators all feature the patented 3M™ Cool Flow™
Exhalation Valve.
Welding and Metal Pouring
8214 (N95)
(AAD#07187)
Is designed for applications such
as welding, soldering and other
8212 (N95)
operations where metal fumes may
Features the 3M™ Cool Flow™
be present including those with ozone* and nuisance level
Exhalation Valve, cake-resistant filter
organic vapors.**
media, a comfortable foam faceseal and
Additional Applications: Metal pouring, working with stainless, galvanized,
or aluminium
fully adjustable straps.
Additional Applications: Metal pouring
8514 (N95)
8512 (N95)
Is designed for applications such
Features the 3M™ Cool Flow™
as welding, soldering and other
Exhalation Valve, cake-resistant filter
operations where metal fumes are
present including those with ozone* and nuisance level
organic vapors.**
Additional Applications: Metal pouring, working with stainless, galvanized,
or aluminium
8515 (N95)
media, nose foam, and fully adjustable
noseclip and straps.
Additional Applications: Metal pouring
(AAD#07189)
An economical option for welders
featuring the 3M™ Cool Flow™
Exhalation Valve, adjustable M-noseclip,
and braided headband to help provide a custom fit and
secure seal.
*3M recommended for ozone protection up to 10X OSHA PEL. Not NIOSH approved for ozone.
* *3M recommended for relief against nuisance level acid gas or organic vapors. Nuisance levels are less than OSHA PEL or applicable government occupational exposure
limits, whichever is lower. Do not use for respiratory protection against gases or vapors.
Flags denote country of manufacture, however all products may include globally sourced components. Contact 3M for more details.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
5
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Filtering Facepiece Respirators – Specialty
Suggested Applications: Grinding, bagging, sanding, sweeping in oil and non-oil environments
and other dusty operations
Unvalved Specialty Respirators
8247 (R95)
(AAD#07186)
Is designed to help provide comfortable
protection against certain oil and non-oil
based particles including those present
with nuisance levels of organic vapors*, such as solvents,
degreasers, and resins.
Additional Applications: Foundry operations, lab settings, agriculture,
petrochemical manufacturing and undercoating where particles and nuisance
levels* of organic vapors may be present
8246 (R95)
Helps provide protection against certain
oil and non-oil based particles including
those present with nuisance levels of
acid gases* such as sulphur dioxide, hydrogen fluoride,
and/or chlorine.
Additional Applications: Glass etching, chemical processing, paper processing,
aluminum smelting and brewing operations where particles and nuisance levels of
acid gases* may be present
8240 (R95)
Is designed to help provide protection
against certain oil and non-oil based
particles. It features a collapse resistant
Valved Specialty Respirators
Features the patented 3M™ Cool Flow™ Exhalation Valve.
Suggested for extended wear time, hot/humid conditions
8577 (P95)
Is designed to help provide comfortable,
reliable worker protection against
certain oil and non-oil based particles
including those present with nuisance levels of organic
vapors* such as solvents, degreasers and resins.
Additional Applications: Foundry operation, lab settings, agricultural,
petrochemical, manufacturing
8576 (P95)
Is designed to provide comfortable,
reliable worker protection against
certain oil and non-oil based particles
including those present with nuisance levels of acid gases*
such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
Additional Applications: Glass etching, chemical processing, paper processing,
aluminum smelting and brewing operations
8271 (P95)
Combines P-series versatility with
exceptional comfort and fit. It is an
excellent choice for those who have
work environments that may contain oil aerosols.
shell for increased durability in most hot, humid conditions.
Additional Applications: Grinding, sanding, sweeping, machining and other dust
producing/oily operations
*3M recommended for relief against nuisance level acid gas or organic vapors.
Nuisance levels are less than OSHA PEL or applicable government occupational
exposure limits, whichever is lower. Do not use for respiratory protection against
gases or vapors.
8516 (N95)
Is designed for the aluminum industry. It
helps provide protection against certain
non-oil based particles including those
present with nuisance levels of acid gases* such as sulphur
dioxide, hydrogen fluoride, and/or chlorine.
Flags denote country of manufacture, however all products may include globally
sourced components. Contact 3M for more details.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
6
3M™ Half Facepiece Respirators 5000 Series
The innovative design of 3M™ Half
Facepiece Disposable Respirators 5000
Series makes them an easy, economical
way to help provide worker protection.
A lightweight, well-balanced design
provides greater worker comfort.
These respirators are pre-assembled,
have no spare parts and require
no maintenance.
The 5000 Series maintenancefree respirators are ideal for safety
applications where respirators are only
used occasionally or where disposability
is required.
Features
•Available in three sizes (small, medium, large) to fit
many faces.
•Low profile design provides wider field of vision and
greater comfort while wearing goggles or glasses.
•No ongoing maintenance necessary—saves both time
and money.
•Can be used with NIOSH-approved 3M™ Filters N95,
P95 and P100 for oil and non-oil particles.
•Resealable storage bag helps keep respirator clean
between uses.
•For convenience and simplicity, some respirator package
assemblies are packaged with 3M™ Filters P95 along
with 3M™ Filter Retainers 501.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
7
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Respirators
3M™ Half Facepiece Respirators 5000 Series – Product Matrix
5103 (S)
5203 (M)
5303 (L)
OV/AG
Filters
5101 (S)
5201 (M)
5301 (L)
OV
5P71
P95 Filter
(AAD#07194)
2071
P95 Filter
501 Filter Retainer
(AAD#07054)
Assemblies
Filter Retainer
and Adapter
5N11
N95 Filter
2091
P100 Filter
(AAD#07000)
7093
P100 Filter
502 Filter Adapter*
51P71 (S)
52P71 (M)
53P71 (L)
P95/OV
(AAD#07191) (S)
(#07192) (M)
(#07193) (L)
OV =NIOSH approval: Certain organic vapors.
OV/AG =NIOSH approval: Certain organic vapors, chlorine, hydrogen chloride, and sulfur dioxide or hydrogen sulfide or hydrogen fluoride.
P95/OV =NIOSH approval: P95/certain organic vapors.
*Do not reuse.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
8
3M™ Half and Full Facepiece Respirators
6000, 7000 and FF-400 Series
The 3M™ Half and Full Facepiece Respirators 6000, 7000
and FF-400 Series use interchangeable filters and cartridges,
minimizing the number of parts your facility needs to stock.
They are versatile enough to meet your current and future
respirator needs. These products offer unique benefits,
without limiting wearer comfort. All are available in three
sizes, making your respirator choice simple—3M!
3M™ Half Facepiece Respirators 6000 Series, Reusable
Provides Lightweight, Easy-to-use, Economical Protection
•An economical choice.
•Facepiece is made from soft,
lightweight thermoplastic elastomer.
•Available with a standard or dropdown head harness option.
•Drop-down model allows wearers to lower the respirator
without removing welding shield, hard hat or faceshield.
•Head harness assembly and spare parts available.
3M™ Full Facepiece Respirators 6000 Series, Reusable
•Lightweight design with silicone face
seal enhances comfort and improves
durability.
•Wide field of vision.
•Available in four different modes;
can be used with both negative and
powered and supplied-air systems.
3M™ Half Facepiece Respirators 7500 Series, Reusable
Provides Comfortable, Soft Silicone Faceseal
•Made of silicone for greater comfort and
helps provide a softer feel on the face.
•3M™ Cool Flow™ Exhalation Valve for
easy exhalation for cool, dry comfort;
and designed to be long lasting.
•Can be used with a variety of cartridges and filters that help
protect against both dust and/or gas and vapor.
3M™ Ultimate FX Full Facepiece Respirator FF-400 Series,
Engineered for Maximum Comfort, Durability and Visibility
•Soft, silicone nose cup and faceseal.
•3M™ Cool Flow™ Exhalation Valve for
easier breathing and cool, dry comfort.
•Comfort Head Cradle positions the
respirator more comfortably on the head,
reducing pressure points and hair pulling.
•Long-lasting head harness.
•Large lens for excellent peripheral vision.
•Paint and stain-resistant lens – 3M’s exclusive Scotchgard™
Coating causes some paints and stains to bead up on the
surface so they can be wiped off easily.
•Scotchgard™ Semi-Permanent Lens Cover also causes
some paints and stains to bead up and lasts longer than
standard tear-aways.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
9
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Facepieces
3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series — Product Matrix
6100 (S) (AAD#07024)
6200 (M) (AAD#07025)
6300 (L) (AAD#07026)
7501 (S) (AAD#37081) 6700 (S) (AAD#07138)
7502 (M) (AAD#37082) 6800 (M) (AAD#07139)
7503 (L) (AAD#37083) 6900 (L) (AAD#07140)
6100DD (S)
6200DD (M)
6300DD (L)
Filter Retainer
and Adapter
6700DIN (S)
6800DIN (M)
6900DIN (L)
FF-401 (S)
FF-402 (M)
FF-403 (L)
Other Automotive Aftermarket
Products Available:
Paint Spray
Packouts (S, M, L): (#07177;
#07178; #07179)
(AAD#07046)
2071 P95 Filter
60921 P100/OV
6001 OV
(AAD#07046)
Bodyman OV/P95 Packouts (S, M, L):
(#07181; #07182; #07183)
P-100 with Nuisance Organic
502 Filter Adapter¹
2076* HF/P95 Filter
60922 P100/AG
6002
AG
(AAD#07054)
Cartridges and Filters
Brake & Clutch Packouts (S, M, L):
(#07001, #07002, #07003)
(AAD#07047)
60923 P100/OV/AG
6003
OV/AG
(AAD#07000)
2091 P100 Filter
5N11 N95 Filter
**P 95 filter with nuisance level organic vapor/
acid gas relief. (Nuisance levels are less than
OSHA PEL.)³
(AAD#07184)
***P100 filter with nuisance level acid gas relief.
(Nuisance levels are less than OSHA PEL.)³
2296*** P100 Filter
2297**** P100 Filter
=NIOSH approval: Chlorine,
hydrogen chloride, and
sulfur dioxide or chlorine
dioxide or hydrogen sulfide.
AM/ =NIOSH approval: Ammonia
MA and methylamine.
Form =NIOSH approval:
Formaldehyde† and
certain organic vapors
6005
Form
60926 P100/Multi Gas
****P100 filter with nuisance level organic vapor
relief. (Nuisance levels are less than OSHA PEL.)³
*****P100 cartridge filter with hydrogen fluoride and
nuisance level organic vapor and acid gas relief.
(Nuisance levels are less than OSHA PEL.)³
AG
60925 P100/Form
6004
AM/MA
*P95 filter with hydrogen fluoride and nuisance
level acid gas relief. (Nuisance levels are less
than OSHA PEL.)³
=NIOSH approval: Certain
organic vapors.
OV/ =NIOSH approval: Certain
AG organic vapors, chlorine,
hydrogen chloride, and
sulfur dioxide or hydrogen
sulfide or hydrogen
fluoride.
(AAD#07194)
OV
60924 P100/AM/MA
5P71 P95 Filter
2096*** P100 Filter
2291 P100 Filter
Full Facepiece 6000 Series
OV/P95 Packouts (S, M, L):
(#07161; #07162; #07163)
501 Filter Retainer
2078** P95 Filter
2097**** P100 Filter
7800S (S)
7800S (M)
7800S (L)
6006
Multi Gas
60928 P100/OV/AG²
Multi-=NIOSH approval: Certain
Gas/ organic vapors, chlorine,
Vaporhydrogen chloride,
chlorine dioxide, sulfur
dioxide, hydrogen sulfide
ammonia/methylamine,
formaldehyde† or
hydrogen fluoride.
Merc =NIOSH approval: Mercury
vapor or chlorine gas.
¹Do not reuse.
²3M recommended for methylbromide or radioiodine
up to 5 ppm with daily cartridge change.
³3M recommended for relief against nuisance level
acid gas or organic vapors. Nuisance levels are
less than OSHA PEL or applicable government
occupational exposure limits, whichever is lower.
Do not use for respiratory protection against
gases or vapors.
†OSHA regulations require that gas-proof goggles
be worn with half facepiece respirators when used
against formaldehyde.
60929 P100/Merc
6009
Merc
(AAD#37173)
7093C***** P100/HF
603 Filter Adapter
7093 P100 Filter
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
10
3M™ Detection and Environmental Products
3M™ Personal Air Monitoring Systems
Features
•Simple and convenient. There
are no batteries, hoses, pumps, or
equipment to calibrate.
•Easy to use. Just clip the monitor
to shirt lapel, collar, or pocket.
•Versatile. 3M monitors can also
be used for area monitoring, if
sufficient air flow exists.
The Economical, Accurate Way to Monitor Your Workplace
•Analysis options. 3M monitors
can be analyzed in the certified/
accredited lab of your choice or
returned for analysis.
•Confidence. The analysis facility
is accredited by the American
Industrial Hygiene Association.
•Comfort. 3M monitors are small
and lightweight and will not
interfere with employee activities.
3M™ Thermal Imaging Camera FF131
3M™ Air Monitors are simple and effective devices that collect certain airborne
Designed for
contaminants using the scientific principle of diffusion. They meet or exceed
firefighting and
±25% accuracy at a 95% confidence level for many workplace contaminants.
rescue operations,
the 3M™ Thermal
These air monitor systems can be analyzed in the lab of your choice or purchased
Imaging Camera
with analysis included.
Organic Vapor
Monitors
3500, 3510*
(AAD#37023)
FF131 offers
Organic Vapor
Monitors With
Back-Up Section
3520, 3530*
excellent resolution, fast refresh rate,
wide dynamic range, exclusive
display options.
•Four display options: Full Color,
Grayscale, InfoTherm, and Autumn
•Radiometry
Ethylene Oxide
Monitors
3550*, 3551,
3551B
Formaldehyde
Monitors
3720*, 3721,
3721B
•Optional internal transmitter
*Includes pre-paid analysis.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
11
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Portable Gas Detection Products
Your number one priority on the job
is the safety of your team, and that
means you need safety equipment that
is reliable and accurate. We build our
detection and monitoring products to
be among the best in the industry.
Combined with our dedication to
technical support, 3M works every day
to be the most innovative health and
safety product and service provider in
the world.
CO
NH3
H2S
H2
O2
HCN
NO
PH3
NO2
C5H12
SO2
CH4
CI2
MOS
PID
CO
H2S
O2
NO
NO2
SO2
CI2
NH3
H2
HCN
3M™ Multi-Gas Detector 950 Series
•Detect up to 5 gases simultaneously
3M™ Single
Gas Detector
450 Series
•10 gas
sensor options
•15 smart sensor options, including a PID and
MOS broadband sensor
•Massive data-logging capacity
•Easy operation with the push of a button
•Easy-to-use 3M Know Your Air software with intuitive user interface
•Simple, informative display
•Internal pump
•Easy to calibrate
™
H2S
O2
CO
CH4
3M™ Multi-Gas Detector 740 Series
•Detect up to 4 gases simultaneously
CO
H2S
•Quick calibration mode
3M™ Single
Gas Detector
110 Series
•Lightweight
and compact
•Easy-to-replace pre-calibrated smart sensor pack
with end-of-life indicator
•Easy one-button
operation
•Massive data-logging capacity
740 Model
O2
•Runs on rechargeable lithium ion batteries or alkaline batteries
•Long-lasting lithium battery
•Three alarm indicators
•Three alarm indicators
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
12
3M™ Fixed Gas Detection Products
Some applications may require the installation of a fixed gas
detector as early warning devices integrated with alarm systems,
ventilation control or leak detection. 3M manufactures a wide
variety of fixed gas detection products for residential, commercial
and light industrial applications. Following is a partial list of
available fixed gas detectors.
CM-E1
UL listed carbon monoxide gas detector for
use with fire and security alarm systems.
•9-32 VAC operation
•Alarm relay
CM-21A
•Trouble relay
CM-21A Fan relay actuation is selectable
•Patented EZ-Check technology for quick
and convenient on-site field CO testing
at 25ppm, 35ppm (default), 50ppm or
100ppm CO within 5 minutes and the
Alarm relay is selectable at normally
open or normally closed and responds at
100ppm CO within 3 hours or 200ppm CO within 10 minutes.
Stand-alone carbon monoxide detection and fan control
system are for use in enclosed parking and warehouses.
•Status LED’s
DVP-120
Gas detection and ventilation control panel
with externally visible LCD display showing
the status of each sensor transducer
and relay. The DVP-120 works with
CM-4, CM-2B or CM-3 Carbon Monoxide
•12-24 VAC or VDC operation
detectors or ND-2 Nitrogen Dioxide detector or GT-11A.
•Dual relays: fan and alarm
•120 VAC Operation
HD-11/HD-12
•Adjustable alarm setting and time delays
Hydrogen gas detector for use with alarm
control panels.
•12-24 VAC or VDC operation
•One alarm relay for 10% LEL (HD-11 model)
•Accepts 4-20mA input from up to 12 CO, NO2,
or LEL gas sensors
•Three 16 Amp, 240 VAC SPDT fan/alarm settings
•Lockable NEMA 1 type enclosure
•Two alarm relays for 10% and 25% LEL (HD-12 model)
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
13
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Powered and Supplied Air Respirators
3M™ Powered Air Purifying Respirators (PAPRs)
A PAPR is a powered air purifying
respirator system that uses a fan to
deliver filtered air into a hood, helmet or
full facepiece. There are many different
PAPR configurations available. Depending
on the working environment, select the
PAPR style that best meets your needs.
Depending on the headgear chosen,
certain powered air systems also provide
head, eye and face protection. Powered
air systems are available as facemounted, helmet-mounted and beltmounted configurations. PAPR systems
include a headpiece, a breathing tube,
motor-blower unit, filters, and/or a
cartridge and battery.
3M™ Supplied Air Respirators
3M™ Supplied Air Respirators are designed to deliver clean air to the worker.
The air* can be supplied from a high pressure compressor, low-pressure pumps, or
cylinders (bottled air). This clean, breathable air can be delivered to hoods, helmets,
full facepieces, half facepieces and loose-fitting facepieces.
Supplied air respirators offer many features over traditional respiratory protection
such as:
• Cooling or heating incoming air
• Fit testing only required on tight-fitting facepieces
• Low maintenance
Supplied air systems are a good way to help increase comfort and protection.
For an overview of headgear used with powered and supplied air respirators, review pages 15-16 of this catalog.
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the
Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
14
3M™ Powered and Supplied Air Headgear
Powered and Supplied Air Respirator System Categories
The photos and descriptions below are an overview of the different headgear
systems that 3M offers. Each has distinct features to meet your needs. Find the unit
that best matches your requirements and review the charts on the following pages
to help guide your selection process.
3M™ Bumpcaps, Hard hats and Helmets
•Welding option
•No fit testing
of each category
required
available
•Liftable lens
•Can be worn
•Ratchet head
with glasses
suspension on
most models
L-Series
•Bumpcap,
hard hat and
helmet category
products
•See matrix pages
19, 26
Tight-Fitting
Facepieces
•Full facepiece
products
available in
three sizes
•Low profile for good visibility
•Use in negative or positive pressure
applications
•Accommodates facial hair
and beards***
BE-Series
•Hard hat
protection
W-8100B
•Abrasive
blasting helmet
•Welding option
•See matrix
pages 26, 27
•See matrix
pages 20,
21, 22
•Welding option
•Assigned protection factor* for
Bumpcaps and Hard hat: 25xPEL; for
Helmets: 1000xPEL** (when configured
with an Adflo™, only an APF of 25)
Headcovers
and Visors
•Lightweight
Hoods
•Hard hat
options
•Tychem® QC
material
• Lightweight
•See pages 20-22 for BE-12 Series
headcovers
•Tychem® QC and
Tychem® SL materials
•ClearVisor, see page 23
•See pages 19, 26 and 27 for
H-Series Hoods; see pages 20, 21
and 22 for BE-10 Series Hoods
•Comfortable faceseals
• Half facepiece options available with
supplied air systems
• Welding option available
•See matrix pages 19, 21, 22, 25 and 28
*Refer to OSHA regulation 29CFR1910.134 Table 1 for details on APF values. For additional limitations of 3M respiratory protection products, refer to 3M respirator packaging
and use instructions and limitations.
**3M recommended assigned protection factors are based on workplace and laboratory performance tests of our respirators. See 3M Technical Data Bulletin # 175
“Assigned Protection Factors (APFs) for 3M Hoods and Helmets.”
***Providing the facial hair does not come between the face and the faceseal of a loose-fitting facepiece or protrude under the shroud of a hood.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
15
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Powered and Supplied Air Headgear
4
4
4
4
4
L-701
4
4
4
L-703
4
4
4
4
L-705
4
4
4
L-705 SG
4
4
4
4
25
4
4
25
4
4
4
25
4
4
4
25
4
4
25
4
4
4
4
25
4
4
4
Adflo™ Assembly
4
Breathe Easy™
Assembly
4
For Welding
Protection Factor
4
L-505
Supplied Air
L-503
Air-Mate™ Assembly
4
GVP Assembly
4
For Grinding
Meets ANSI Z87.1-2003
High Impact Standard
L-501
Meets ANSI Type I and II
Hard hat requirements
ANSI Z87.1-2003
Can be worn with
limited Facial Hair**
Works with the Following 3M Assemblies
Headtop
L-901
4
4
4
4
4
L-901 SG*
4
4
4
4
4
L-905
4
4
4
4
4
4
L-905 SG*
4
4
4
4
4
4
W-8100B
4
4
4
4
520-02-28R01
520-01-83R01
4
4
4
4
520-01-84R01
4
4
4
ClearVisor Faceshield
4
4
4
4
4
4
4
4
4
1000
4
1000
4
4
1000
4
1000
4
4
25
4
4
25
4
4
1000
4
1000
4
4
25
4
25
Air-Mate Assembly
Breathe Easy™
Assembly
4
4
™
GVP Assembly
Built-in Suspension
Chemical Resistant
Collar Option
Works with the Following 3M Assemblies
Inner Shroud Option
Meets ANSI Type I and II
Hard hat Requirements ANSI
Z87.1-2003
Meets ANSI Faceshield
Requirements
ANSI Z87.1-2003
Speedglas™ Helmet
9000 HWR
Can be worn with
limited Facial Hair**
25
1000
Protection Factor
4
4
4
4
Supplied Air
6000 Full Facepiece
7000 Full Facepiece
4
Hoods
BE-12/BE12L
4
H-400 Series
4
Optional
H-600 Series
4
Optional
H-900 Series
4
Optional
BE-10/BE-10L
4
4
BE-10 BR (Butyl Rubber)
4
4
4
4
4
4
4
4
4
4
4
1000
4
4
1000
4
4
4
4
25
4
4
4
4
1000
4
1000
1000
*APF of 25 when configured with Adflo™.
* *Providing the facial hair does not come between the face and the faceseal of a loose-fitting facepiece or protrude under the shroud of a hood.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
16
3M™ L-Series Spare Parts and Accessories
Part(s)
Part #
Description:
Notes:
Lens C­­­over
L-133
Disposable Lens Covers
isposable lens covers help protect the visor from scratches and distortions. Replace as
D
needed to insure proper visibility. Available in packs of 25 (L-133-25) or 100 (L-133-100).
Tychem® QC Faceseal
Faceseals insure that a proper seal is maintained with the wearer’s face. Damaged or worn
faceseals can cause leaks, which could decrease airflow, battery life, and increase the risk
of exposure.
Faceseals and Shrouds L-121
L-1231
Tychem® QC Shroud
L-1242
Flame Retardant Faceseal - Polyester
L-125
Flame Retardant Shroud
L-1284
Cordura® Nylon Shroud
L-120
Faceseal, Flame Retardant - Softguard
L-227
Outer Shroud, Flame Retardant, Leather
L-225-2
Outer Shroud, Flame Retardant, Durable
L-226-2
Inner Shroud
L-223-2
Outer Shroud, Standard
L-228-2
Outer Shroud, Nylon
L-130
Wide-view Faceshield Assembly
L-131
Wide-view Lens
L-132
Wide-view Lens, High Temperature
For use in high temp environments, where there exists potential for warping of the lens.
L-134
Latch Kit
Replace latches when missing or broken. Do not use unit if latches are defective.
L-136
Cam Spring Set
Replace when faceshield will not stay in up or down position, or if the faceshield is loose in
a closed position.
L-137
Wide-view Faceshield Extender
Replace assembly when warped.
L-112
Chin Strap
Accessory. Replace when worn or damaged.
L-113
Head Suspension
Replace when bracket damaged or it will not tighten.
L-115
Sweat Pad
Replace when dirty or when foam begins to degrade.
L-116
Head Pad
Replace when dirty or damaged.
L-117
Hanger Suspension
Replace when broken.
L-140
Knob
Replace when missing or broken.
L-141
Knob and Pivot Kit
Replace when missing or broken.
L-163
Head Seal Kit
Replace when dirty or damaged.
L-182
Air Deflector
Replace when missing or broken.
L-183
Headgear Cover
Prevents scratches and damage to the headtop.
3
Lens Assembly
Head Suspension
External Knobs
Helmet and Head Seal
For L-901 series helmets only.
Flame retardant faceseal for L-500 and L-700 series helmets.
3
Flame retardant shroud for L-900 series helmets only.
4
Cordura® Nylon fabric shroud for use with L-900 series only.­­­­
1
2
Proper use and maintenance of powered and supplied air systems is essential to product performance. Over time, parts and
pieces will become worn or damaged, and they will require replacement. Operating equipment with damaged or worn parts can
decrease the unit’s ability to protect, decrease airflow, and could result in serious personal injury or death.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
17
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Hoods and Headgear Parts and Accessories
3M™ H-Series Replacement Hoods and Parts
H-110-10
Faceshield Cover (10 pack)
H-111-100
Faceshield Cover (100 pack)
H-113-2
Cap Suspension (2 pack)
W-2878-2
Head Suspension (2 pack)
H-114-2
Chin Strap (2 pack)
H-115
Breathing Tube Assembly (includes H-116 breathing tube with connector,
W-5102 thumbscrew clamp, and W-3222 plastic squeeze clamp)
H-116-2
H-410-10
H-420-10
H-610-5
W-3222-2
W-3258-5
Breathing Tube (2 pack)
H-400 Series Hood with collar (10 pack)
H-400 Series Hood with inner shroud (10 pack)
H-600 Series Sealed Seam Hood with collar (5 pack)
Squeeze Clamp, plastic (2 pack)
Hatshell (suspension not included ) (5 pack)
3M™ BE-Series Replacement Hoods and Parts
520-01-13R01
White Helmet Shell
520-01-33R01
Black Helmet Shell
061-37-00R02
Pivot and Cam
AS170/AS170B
Visor Surround
522-01-01R01
Visor
060-49-02R10
Temple Seal
060-28-03R01
Headseal
527-01-19R01
Faceseal – Sontara
527-01-15R10
Faceseal – Tychem®
AS-150
Cradle Assembly
060-38-05R01
Headband
060-39-01R01
Comfort Band
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
Replace when/if...
Worn or damaged
Worn or damaged
Worn or damaged
When abraded, cracked or damaged
When worn or damaged
Replace when/if...
Cracked, warped, yellowed, chipped
Cracked, warped, chipped, faded color
Missing, broken
Cracked, warped, broken
Cracked, warped, crazed
Out of position, damaged
Missing, torn, ripped, warped
Missing, torn, holed, ripped
Missing, torn, holed, ripped
Broken, torn
Broken, torn
Heavily soiled, missing
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
18
3M™ GVP-Series Belt-Mounted Powered Air Purifying Respirators — Product Matrix
The GVP PAPR is a motorized blower unit worn at the waist,
Features
that delivers filtered air into a hood, helmet or facepiece. The
GVP allows the wearer to choose from a wide selection of filters
that offer flexibility and freedom to work in a variety of industrial
environments. These systems are compatible with many
different styles of headgear ranging from lightweight hoods,
bumpcaps, hard hats, helmets and full facepiece respirators.
•High levels of airflow
•Intrinsically safe
option available
•Contoured for
maximum comfort
•Inlet and outlet plugs to allow
blower unit to be completely
•2 eight-hour battery
sealed for decontamination
options (NiMH and NiCD)
•All hoods and helmets are dual approved for use
in SAR mode
Bumpcaps
Headgear
L-501
Hard hats
L-503
Hoods
L-505
L-701
L-703
Full Facepieces
L-705
L-705 SG
Helmets
GVP-CB Includes
H-411
H-412
H-421
H-422
H-611
H-612
6700DIN (S)
6800DIN (M)
6900DIN (L)
7800S (S)*
7800S (M)*
7800S (L)*
L-901
L-901 SG
all components of
GVP-1, except
GVP-127 Waist Belt
is replaced with
CB-1000 Waist Belt.
Breathing Tube
Paint Spray Kit
GVP-PSK
L-905
H-115
GVP-122
GVP-123
GVP-1 Includes all components
GVP Assembly
GVP-110
GVP-100 GVP-111
GVP-127 GVP-112 GVP-113 Power Cord
Motor Blower
Battery Pack
Waist Belt
Battery Charger
Flow Meter
Cartridges
GVP-401 Organic Vapor Cartridge
GVP-402 Acid Gas1 Cartridge
GVP-403Organic Vapor, Acid
Gas2 Cartridge
GVP-404 Ammonia Cartridge
GVP-405 Formaldehyde Cartridge
L-905 SG
L-122
GVP-1 NiMH Includes all components
GVP-100
BP-15
BC-210
GVP-127
GVP-113
L-181
GVP-115
GVP-210
Motor Blower
Battery Pack
Smart Battery Charger
Web Belt
Flow Meter
Flow Meter Adapter
Blower Plugs
Power Cord
GVP-440 HEPA Filter
GVP-441 Organic Vapor/HE Cartridge
GVP-442 Acid Gas1/HE Cartridge
GVP-PSK includes all components
of GVP-CB and:
GVP-441 Organic Vapor/
HEPA Cartridge
GVP-119 Shower Cover
L-122 Breathing Tube
L-133 Lens Cover
L-501 Bumpcap with
Wide-View Faceshield
GVP-443Organic Vapor, Acid
Gas2 /HEPA Cartridge
GVP-444 Ammonia/HE Cartridge
GVP-445 Formaldehyde/HE Cartridge
*Clip-on Welding Shield also available.
OV
AG1
AG2
= NIOSH approval: Certain organic vapors.
= NIOSH approval: Chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide or hydrogen fluoride.
= NIOSH approval: Chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen fluoride or hydrogen sulfide (escape only).
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
19
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Air-Mate™ or High Efficiency (HE) Belt-Mounted Powered Air Purifying
Respirator Systems — Product Matrix
Features
•Lightweight
•Choice of Tychem® QC hood or Tychem® QC head cover
•Filter and battery are enclosed in single unit
•High efficiency particulate filter only
•Up to eight hours of battery service per charge
•Battery can be charged either within unit or externally
using the 520-04-24 external battery charger assembly
Battery Charger
HEPA PAPR Assembly
Breathing Tube
Headgear
Head Cover
BE-12 Tychem® QC
BE-12B-3
BE-12B-50
BE-12LB-3
BE-12LB-50
Blue Reg (3)
Blue Reg (50)
Blue Lg (3)
Blue Lg (50)
AMH-1U Includes:
• Air-Mate™ PAPR Unit 520-03-63R01
• Battery Pack 007-00-15R01
• HE Filter 451-02-01R01
• Airflow Indicator 021-14-00R01
• Vinyl Belt GVP-117
• External Charging Adapter 520-04-24
• Breathing Tube BE-224
• Breathing Tube Cover W-3228-10
• Smart Battery Charger 520-03-73
Hood
BE-10 Tychem® QC
BE-12-3
BE-12-50
BE-12L-3
BE-12L-50
White Reg (3)
White Reg (50)
White Lg (3)
White Lg (50)
BE-224
AMH-1U
231-01-30
520-03-73
Single Battery Charger
520-03-72
Five Battery Charger
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
BE-10-3
BE-10-20
BE-10L-3
White Reg (3)
White Reg (20)
White Lg (3)
AMH-12U Includes:
• Air-Mate™ PAPR Assembly 231-01-30U
• Vinyl Belt GVP-117
• Head Cover BE-12-3, Regular, White
• Smart Battery Charger 520-03-73
231-01-30 Includes:
™
• Air-Mate PAPR Unit 520-03-63R01 • External Charging Adapter 520-04-24
• Breathing Tube BE-224
• Battery Pack 007-00-15R01
• Breathing Tube Cover W-3228-10
• HE Filter 451-02-01R01
• Smart Battery Charger 520-03-73
• Waist Belt Nylon 021-41-02R01
• Storage Bag
• Airflow Indicator 021-14-00R01
231-01-30U Includes:
• Air-Mate™ PAPR Unit 520-03-63R01
• Battery Pack 007-00-15R01
• HE Filter 451-02-01R01
• Airflow Indicator 021-14-00R01
• Vinyl Belt GVP-117
520-01-61
Ten Battery Charger
AMH-12U
520-04-24
External Battery Charger
Assembly
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
20
3M™ Breathe Easy™ Belt-Mounted System with
NiMH BP-15 Battery — Product Matrix
Breathe Easy™ Powered Air Purifying Respirator (PAPR)
Standard System 520-15-00
•Consider for the following industries: Abatement, Nuclear Utilities, Smelting, Lead
Reclamation, Pharmaceutical, Foundry, Steel and Welding. First Responder –
Butyl Rubber hood system only.
Features
•Eight hour battery
•Comfortable to wear
•Uses the new BP-15 NiMH Battery which has a quick charge time (90% charge
after 2 hours; 100% charge after 4 hours) and provides increased airflow
(approximately 20% more).
Headgear
Full Facepiece
6000 Series*
Breathing Tube
6700 DIN (S)
6800 DIN (M)
6900 DIN (L)
Hoods
BE-10 Series
Butyl Rubber** Tychem® BE-17***
Headcovers
BE-12
BE-12B-3 Blue Reg (3)
BE 12B-50 Blue Reg (50)
BE-12LB-3 Blue Lg (3)
BE-12LB-50 Blue Lg (50)
520-01-77
•Wide variety of headgear
BE-12-3 White Reg (3)
BE-12-50 White Reg (50)
BE 12L-3 White Lg (3)
BE-12L-50 White Lg (50)
BE-10BR
Hood Butyl
Rubber
520-03-32R01
(Standard, 33")
520-01-80R01
(Optional, 25")
Helmets
BE-10-3 White Reg (3)
BE-10-20 White Reg (20)
BE-10L-3 White Lg (3)
BE-17
520-01-84R01
520-01-00R01
(Standard, 36")
520-02-94R01
(Optional, 25")
BE-1
520-01-83R01 White
520-02-28R01 Black
526-01-13R01
(Standard, 17.5")
526-01-10R01
(Optional, 14")
Turbo PAPR Assembly
Breathe Easy™ Turbo PAPR Assembly
520-15-00
022-00-03R01
520-02-90R01
520-01-21
Flow Meter
BP-15
NiMH Battery
BC-210 Charger
Cartridges/Filters/
Canisters
Cartridges
OV (A)
OV/AG1 (AE)
AG1/FORM (E)
AMM (K)
HE (P3)
OV/HE (AP3)
456-00-01R06
456-03-01R06
456-02-01R06
456-01-01R06
450-00-01R12
453-00-01R06
OV/AG1/HE (AEP3)
OV/AG 3 /HF/HE (ALP3)
AG/FORM/HE (EP3)
AMM2 /HE (KP3)
FR-40****
FR-57*
453-03-01R06
453-07-01R06
453-01-01R06
453-01-01R06
453-03-03R06
453-03-02R06
Chlorine, hydrogen chloride and sulfur dioxide.
Ammonia/methylamine.
3
Sulfur dioxide.
1
2
Footnotes
*FR-57 Approved with BE-10 and 6000 ONLY
**Butyl Rubber Hood Approved with FR-57, AP3 and AEP3 ONLY
***BE-17 Approved with P3, AP3, AEP3, ALP3 and EP3
* ***FR-40 Approved with 6000 ONLY
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
21
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Breathe Easy™ Belt-Mounted PAPR System with BP-17IS NiCD Battery
(Intrinsically Safe)** — Product Matrix
Features
•Consider for the following industries: Abatement, Nuclear
Utilities, Smelting, Lead Reclamation, Pharmaceutical,
Foundry and Steel, Welding.
Headgear
Full Facepiece
6000 Series
Breathing Tube
6700 DIN (S)
6800 DIN (M)
6900 DIN (L)
•Can be used in environments where intrinsic safety**
is needed.
Headcovers
BE-12
BE-12B-3 Blue Reg (3)
BE 12B-50 Blue Reg (50)
BE-12LB-3 Blue Lg (3)
BE-12LB-50 Blue Lg (50)
520-01-77
Hood
BE-10
BE-12-3 White Reg (3)
BE-12-50 White Reg (50)
BE 12L-3 White Lg (3)
BE-12L-50 White Lg (50)
Helmets
BE-10-3 White Reg (3)
BE-10-20 White Reg (20)
BE-10L-3 White Lg (3)
520-03-32R01
(Standard, 33")
520-01-80R01
(Optional, 25")
BE-17*
520-01-84R01
520-01-00R01
(Standard, 36")
520-02-94R01
(Optional, 25")
BE-1
520-01-83R01 White
520-02-28R01 Black
526-01-13R01
(Standard, 17.5")
526-01-10R01
(Optional, 14")
Turbo PAPR Assembly
Breathe Easy™ Turbo PAPR Assembly
520-17-00
022-00-03R01
520-02-90R01
520-01-21
Flow Meter
BP-17IS**
NiCD Battery
Intrinsically Safe
Battery Charger
Cartridges/Filters/
Canisters
Cartridges
OV (A)
OV/AG1 (AE)
AG1/FORM (E)
AMM2 (K)
HE (P3)
1
2
456-00-01R06
456-03-01R06
456-02-01R06
456-01-01R06
450-00-01R12
Chlorine, hydrogen chloride and sulfur dioxide.
Ammonia/methylamine.
Footnotes
*BE-17 in combination with BP-17IS battery approved with P3 only.
* *The Breathe Easy™ Turbo PAPR with BP-17IS battery pack has been tested
and classified for intrinsic safety (“Exia”) by Underwriters Laboratory (UL) for
use in the following Division I locations: Class I, Group D; Class II, Groups E, F,
G; and Class III. Temperature code “T3”.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
520-03-73
Single Battery
Charger
520-03-72
Five Battery
Charger
520-01-61
Ten Battery
Charger
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
22
3M™ ClearVisor with Adflo™ Systems PAPRs
3M™ ClearVisor with Adflo™ Systems
The ClearVisor with Adflo systems combine eye and face protection
(ANSI Z87.1-2003) with a slim, lightweight, powered air purifying respirator
(PAPR). For more information on the Adflo system, please see page 51.
The systems can be used in a variety of industrial settings,
including woodworking, metal grinding, sanding and
refinishing, foundries, grain* and flour processing, and
other dusty environments.*
Part Numbers
Complete Systems
ClearVisor with Adflo™ HE Particle Filter System: 16-1101-40
OV/SD/CL/HC Cartridges are available for purchase: 15-0399-99
Parts and Accessories for 3M™ ClearVisor with Adflo™ Systems
16-0099-30
15-0399-99
16-0099-27
15-0099-06
16-0099-29
15-0099-10
16-0300-99
(Accessory)
15-0099-16
15-1099-01
16-0099-32
16-0099-28
Turbo
15-0199-99
15-0099-99
15-0009-99
15-1099-07
15-1099-81
15-0099-08
18-0099-33
15-0099-05
*Not approved for explosive atmospheres or where intrinsic safety is required.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
23
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Airstream™ Helmet-Mounted Powered Air Purifying Respirators
Helmet-mounted PAPRs provide all the features of powered
air purifying respirators: increased wearer comfort, no fit
test requirements, compatibility with glasses and may help
increase wearer productivity without the need to wear a
motorized blower unit at the waist. The following systems are
ideally suited for mining, smelting, foundry and metal working.
3M™ Airstream™ Helmet-Mounted
PAPR AS-400LBC
•Eight-hour battery
•Intrinsically safe
•Lightweight and well-balanced
•High efficiency filter
•Hard hat approved
•Includes new higher airflow motor
3M™ Airstream™ Helmet-Mounted
PAPR AS-600LBC
•Miner’s model
•Eight-hour battery
3M™ Face-Mounted PAPRs
•Intrinsically safe
•Lightweight and well-balanced
•High efficiency filter
•Hard hat approved
•Includes new higher airflow motor and
anti-fog/anti-scratch lens
3M™ Powerflow™ Face-Mounted
Powered Air Purifying Respirator 6800
PF (Medium) and 6900 PF (Large)
Face-mounted PAPRs provide increased
airflow and wearer comfort that may
help improve productivity. The product
is ideally designed for abatement and
remediation work. Approved for use with
high efficiency particulate filter only.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
24
3M™ Supplied Air Respirators — Product Matrix
3M™ Supplied Air Respirators are designed to deliver clean air
to the worker. The air* can be supplied from a high pressure
Features
•Fit testing only required
on tight-fitting facepieces
•Can heat or cool supplied
air by up to 50°F (28°C)
when using loose-fitting
headgear
compressor, low-pressure pumps, or cylinders (bottled air).
Supplied air respirators offer many advantages over traditional
respiratory protection including comfort and protection.
• Low maintenance
•Loose-fitting headgear
accommodates facial
hair provided it is not
interfering with the
faceseal
Dual Airline, Supplied-Air, Tight-Fitting Facepieces
Facepieces
6000 Series Full Facepiece
(S, M, L) (AAD#: 07138; 07139;
07140)
6000 Series Half Facepiece
(S, M, L) (AAD#: 07024; 07025;
07026)
7800S**
Full Facepiece
6000 Series
Full Facepiece
FF-400 Series
Full Facepiece
6000DIN Series
Full Facepiece
7000 Series
Half Facepiece
Adapter Kits
Standard Kits
Supplied Air Hose
Back-Mounted
Adapter Kits
SA-2000 (High Pressure)
SA-2000LP (Low Pressure)
Combination Kits
Front-Mounted
Adapter Kits
SA-1000 (High Pressure)
SA-1000LP (Low Pressure)
W-9435
3⁄8" High
Pressure Hose
(25, 50, or 100 ft.)
Combination BackMounted Adapter Kits
SA-2100 (High Pressure)
SA-2100LP (Low Pressure)
W-2929
3⁄8" High
Pressure Hose
(25, 50, or 100 ft.)
25 ft. (#07010)
50 ft. (#07011)
100 ft. (#07012)
Portable Air
Purification Panels
6000 Series
Half Facepiece
Combination FrontMounted Adapter Kits
SA-1100 (High Pressure)
SA-1100LP (Low Pressure)
W-3020
½" Low
Pressure Hose
(25, 50, or 100 ft.)
25 ft. (#07033)
50 ft. (#07034)
100 ft. (#07035)
Note: W-2808
CO Monitor
Retrofit Kit
Available
(#37027)
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the
Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
256-02-00
(50 cfm) with CO
Filtration and
Monitor
256-02-01
(100 cfm) with
CO Monitor
W-2806
(50 cfm) without
CO Monitor
(#07006)
* *Clip-on 3M™ Welding Shield also available.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
25
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Supplied Air* Respirators — Product Matrix
Headgear
Bumpcaps
L-501
(AAD#37008)
Hard hats
L-505
L-701
Breathing Tube
L-503
L-705
L-703
Blasting Helmet
W-8100B
L-122
Breathing Tube
(AAD#37012)
Helmets
L-901
L-901 SG
L-705 SG
H-400
L-905
H-600
Portable Air
Purification Panels
Supplied Air Hose
Air Control Device
GVP-122
Breathing Tube
V-100
Vortex Cooling
Assembly
(AAD#37018)
25 ft. (#07010)
50 ft. (#07011)
100 ft. (#07012)
256-02-00
(50 cfm) with CO
Filtration and
Monitor
V-200
Vortemp™
Heating Assembly
W-9435
3⁄8" High
Pressure Hose
(25, 50, or 100 ft.)
256-02-01
(100 cfm) with
CO Monitor
V-300
Air Regulating
Valve Assembly
(AAD#37019)
W-2929
3⁄8" High
Pressure Hose
(25, 50, or 100 ft.)
W-2806
(50 cfm) without
CO Monitor
(#07006)
L-905 SG
H-115
V-400
Low Pressure
Connector Assembly
(AAD#37020)
W-3020
½" Low
Pressure Hose
(25, 50, or 100 ft.)
Note: W-2808
CO Monitor
Retrofit Kit
Available
(#37027)
25 ft. (#07033)
50 ft. (#07034)
100 ft. (#07035)
Note: Headgear, breathing tube, air control valve,
and compressed air supply hose are required parts
in a NIOSH-approved system. Any NIOSH certification
appearing on 3M components is strictly limited to use in an
approved air system and only in full accordance with the
specifications and limitations under said approval. NIOSH
certifies complete assemblies only, not sub-assemblies.
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the
Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
26
3M™ Supplied Air* Respirators — Product Matrix
Abrasive Blasting
Headgear
Hoods
H-600
Series
(AAD#07044)
Breathing Tube
H-400
Series
(AAD#07030)
W-8100B
W-8003
Breathing Tube
Air Control Device
W-5114
Breathing Tube
(AAD#07031)
Supplied Air Hose
W-3018
Low Pressure
Connector Assembly
(AAD#07032)
Portable Air
Purification Panels
25 ft. (#07033)
50 ft. (#07034)
100 ft. (#07035)
W-2907
Air Regulating
Assembly
(AAD#07029)
W-3020
½" Low
Pressure Hose
(25, 50, or 100 ft.)
256-02-00
(50 cfm) with CO
Filtration and Monitor
256-02-01
(100 cfm) with
CO Monitor
25 ft. (#07010)
50 ft. (#07011)
100 ft. (#07012)
W-2806
(50 cfm) without
CO Monitor
(#07006)
Note: 3M will be transitioning all
headtops that are currently used with
the W-series valves to the V-series
valves (page 26). While we continue
to support the W-series with spare
parts and accessories, we encourage
new users to purchase the V-series
valves. Current users can contact
3M or their local sale representative
for additional information.
W-2862
Vortex Cooling
Assembly
(AAD#07028)
W-9435
3⁄8" High
Pressure Hose
(25, 50, or 100 ft.)
Note: W-2808
CO Monitor
Retrofit Kit
Available
(#37027)
W-2863
Vortemp™ Heating
Assembly
W-2929
3⁄8" High
Pressure Hose
(25, 50, or 100 ft.)
Note: Headgear, breathing tube, air control valve,
and compressed air supply hose are required parts
in a NIOSH-approved system. Any NIOSH certification
appearing on 3M components is strictly limited to use in
an approved air system and only in full accordance with the
specifications and limitations under said approval. NIOSH
certifies complete assemblies only, not sub-assemblies.
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the
Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
27
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Full Facepiece Respirators for Powered Air
and Supplied Air* — Product Matrix
6000 Series
7000 Series
Headgear
FF-400 Series
6700 (S)
6800 (M)
6900 (L)
Powered Air Purifying
FF-401 (S)
FF-402 (M)
FF-403 (L)
6700DIN (S)
6800DIN (M)
6900DIN (L)
7800S (S)
7800S (M)
7800S (L)**
Powerflow™ Face-Mounted PAPR
GVP PAPR
GVP PAPR
Supplied Air
Breathe Easy™ PAPR
Dual Airline
Supplied Air
Dual Airline
Supplied Air
Dual Airline
Supplied Air
Dual Airline
Supplied Air
Supplied Air
Supplied Air
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the
Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
* *Clip-on 3M™ Welding Shield also available.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
28
3M Products for First Responders
3M™ Full Facepiece Respirator 6000DIN, is an Ideal Respirator
for Both Negative and Powered Air Applications
Selecting the right products for first responders is a difficult
and challenging task. In addition to all the training required,
first response personnel must be provided with the best
available products to help protect them from the many hazards
encountered in performing their jobs. 3M offers solutions.
With the numerous events in the U.S. and around the world,
3M now offers an expanded line of personal safety products...
the products that help deliver the confidence and protection that
are needed by first response personnel.
For Negative Pressure
We don’t know what the next emergency will be or when
or where it will occur. 3M products and services are a vital
As a negative pressure system, the
component of homeland security preparedness and operations
6000DIN series full facepiece can be used
all around the world. We supply a wide variety of products
with 3M™ Canister CP3N for tear gas
and services including specialized respirators for Chemical,
agents and 3M™ Cartridge FR-64 for most
Biological, Radiological, Nuclear (CBRN) applications and
military and industrial materials.
respirators for cleanup.
•Can be converted for use with other industrial 3M™ Filters
and Cartridges
Being alert, well-trained and well-equipped is the best policy
• Available in small, medium and large sizes
and the best defense.
• Comfortable, lightweight
• Flexible and durable silicone faceseal
3M™ Breathe Easy™ (BE) 10 Butyl Rubber Hood Systems
•The lightweight butyl rubber hood
• Provides a wide field of vision
helps provide protection, excellent
• Easy to adjust head straps
mobility and visibility
•Butyl rubber meets MIL-C-51251A for
resistance to chemical agents
•Provides a continuous flow of filtered air
•The belt-mounted power unit is
lightweight and comfortable
•Can be used with rechargeable NiMH battery or disposable
lithium battery
•The hood can be worn with facial hair* and glasses
•No fit testing is required prior to wearing a hood
•For use with the 3M™ Cartridge FR-57
•Approximate weight is 8 lbs.
For Powered Air
This is a Rapid Response Powered Air
System (RRPAS) where the components
are stored in a unique carrying bag that
converts into a vest with the PAPR in place
and ready for use with the 3M™ Canister
FR-40 and 3M™ Cartridge FR-57.
• Provides exceptional comfort and mobility
• Easy to don and doff
•Hook and loop fasteners allow fast and easy adjustment
to individual sizes
• The power unit provides continuous flow of filtered air
•Can be used with rechargeable NiMH battery or disposable
lithium battery
• Approximate weight is 10 lbs.
•Also available as belt-mounted PAPR. For component
information, call customer service at 1-800-752-3623.
*Providing the facial hair does not protrude under the faceseal or shroud.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
29
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Air-Mate™ High Efficiency Powered
Air Purifying Respirator
Air-Mate™ systems incorporate the
blower, filter and battery into a compact
and lightweight belt-mounted unit for
respiratory protection against airborne
particulates. These respirators are used
extensively in hospitals and in public health
applications by health care workers.
•Can be used with either lightweight head cover or hood* made
of Tychem® QC. The head cover/hood gives the user a wide field
of vision and directs positive airflow into the breathing zone.
•The breathing tube connects the blower unit to the head
cover/hood.
•The blower unit is a belt-mounted, lightweight package that
combines the filter, battery and motor. It pushes air through
the filter and breathing tube to the wearer’s head cover/hood.
•Replacement filters are High Efficiency (HE) type with
99.97% filtration efficiency.
•Can be worn with facial hair** and glasses. Facial hair must
not interfere with faceseal.
• No fit testing is required prior to wearing.
NIOSH’s CBRN Standard
3M now offers two products, 3M™ Full Facepieces FR-M40B and
FR-7800B, that meet NIOSH’s Chemical, Biological, Radiological,
Nuclear (CBRN) Standard for full facepiece air purifying respirators.
They have been tested and certified by NIOSH for use against
many warfare agents including sarin and sulfur mustard as well
as many industrial chemicals. They also meet the P100 particulate
efficiency standard making them versatile, effective and reliable
for handling the kinds of emergencies that are faced by homeland
security, military and law enforcement personnel.
3M™ Full Facepiece FR-M40B
The M-40 full facepiece has been used
for years by U.S. Armed Forces all around
the world. It has been modified by 3M for
easier breathing and is now available for
CBRN applications.
The 3M™ Full Facepiece FR-M40B with 3M™ Canister FR-15-CBRN or
3M™ Canister CP3N puts 3M at the forefront of innovative products
for personal safety.
•Soft silicone faceseal material means a secure fit and
increased wearer comfort.
•Assembled with second skin and eyepiece outserts in
place. Just attach the FR-15-CBRN canister and you have a
NIOSH CBRN-approved system (TC-146-0271).
•Also NIOSH-approved with CP3N canister for use against
CS, CN and as a P100 filter (TC-14G-0251 Standard) in riot
conditions, including those with tear gas.
•Two integral speaking diaphragms help provide clearer
communications.
•Butyl rubber second skin provides enhanced permeation
protection, which means greater user security.
•Dual ocular lens for enhanced performance and security.
•Patented filtration technology used in our canister results in
the optimum combination of easy breathing, lighter weight,
service life and general comfort.
• Canisters have a shelf life of five years.
• Available with an optional quick doff hood.
3M™ Full Facepiece FR-7800B
This product was designed specifically
for homeland security, military and law
enforcement personnel and features
a low-profile design to help improve
comfort. The facepiece is certified by
NIOSH for CBRN applications when used
™
with 3M Canister FR-15-CBRN. This product positions 3M as
one of the leaders in innovative products for personal safety.
•NIOSH-approved with 3M™ Canister CP3N for use against
CS, CN and as a P100 filter (TC-14G-0251) in riot conditions,
including those with tear gas.
•Lens meets ANSI Z87+ 2003 standard, providing high impact
protection. This facepiece can be used as primary eye protection.
•Lens has optical correction promoting no left-to-right visual
distortion.
• Butyl rubber seal to help resist permeation of warfare agents.
•Newly designed exhalation valve cover to help protect the
valve against chemical agents.
*For use up to 1000 x PEL for hoods and 25 x PEL for head covers or applicable
OSHA or other government exposure limits, whichever is lower.
* *Providing the facial hair does not protrude under the faceseal or shroud.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
30
3M™ Hearing Protection
E-A-R™ E-A-Rfit™ Validation System
E-A-Rfit™ is a laboratory comprehensive
fit validation system to quickly measure
the noise reduction achieved by most
individual workers who are wearing
E-A-R™ earplugs. For more information on this service, please
contact your 3M OH&ESD Sales Representative.
E-A-Rsoft™ Foam Earplugs (NRR 33 dB)
Special, soft and smooth foam formulation
with the highest NRR available from 3M.
Offered in a range of sizes as well as in
corded and uncorded models.
E-A-R™ Classic™ Foam Earplugs
(NRR 29 dB)
E-A-Rsoft™ FX™ Earplugs (NRR 33 dB)
Flared shape for easy insertion and
Our most popular earplug. The Classic
removal. Soft, comfortable foam plugs
earplug’s timeless design has proven
available in corded and uncorded models.
itself in the field for over 30 years, and its
E-A-R™ EXPRESS™
Pod Plugs™ (NRR 25 dB)
foam provides a comfortable, effective
seal. It’s easy to insert and it provides great protection.
The EXPRESS™ Pod Plugs™ make fitting
E-A-R™ Classic™
One Touch™ Dispenser
easy; there’s no roll-down needed. Just
use the soft, flexible grip to push the
One turn and the patented “No
Waste Funnel” delivers earplugs
quickly and easily. Reusable base and
dispensing unit.
plug into position. Because you don’t
touch the foam during fitting, it’s one of the most hygienic
earplugs available.
E-A-R™ UltraFit™ Earplugs (NRR 25 dB)
Talk about earplugs that can do it all.
They’re comfortable, hygienic and
reusable. No sizing is required for
these patented, premolded, triple-flange plugs. No inventory
headaches from managing multiple sizes. And of course,
E-A-R™ premolded plugs are available in a variety of styles
and corded options.
Research suggests that many users will receive less noise reduction than indicated by
the NRR due to variation in earplug fit and wearing time. It is recommended that the NRR
be reduced by 50% for estimating the average amount of noise reduction provided.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
31
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
E-A-R™ Push-Ins™ Earplugs (NRR 28 dB)
E-A-R™ ARC PLUG™ Earplugs (NRR 22 dB – red side)
E-A-R™ Push-Ins™ earplugs combine
The only arc protection earplugs with Hear-Through™ earplug
the ease of use and fit benefits of a
design that allows workers to hear conversation, signals, and
reusable earplug with the cost and
other critical sounds clearly. If an arc flash occurs, the yellow
comfort advantages of a disposable earplug. It’s all made
end of the earplug offers a specially designed patented noise
possible with the innovative, easy-to-use design and the ultra-
filter that activates immediately to suppress the noise to a
soft performance of a tip made of E-A-Rform™ foam. The
lower level – without dangerous delay – reducing the chance
thermoreactive foam softens with body heat.
of hearing damage.
E-A-R™ Push-Ins™ SofTouch™
Foam Earplugs (NRR 31 dB)
Plus, with double-end versatility, workers just have to
Because even the toughest workers like
continuous hazardous noises.
insert the plug’s red end for protection against exposures to
the softest earplugs, SofTouch Foam
•Material successfully tested for ARC exposures of category
2 and higher, ASTM F1959-2005 modified
earplugs are designed to be our softest Push-Ins earplugs.
The cushiony shape seals as well as it feels.
E-A-R brand offers the widest variety of metal detectable
hearing protectors on the market today. Some models come
with metal-detachable cords.
Insert yellow end for
Hear-Through™ and
instant protection
Washable and reusable
Red end for protection
against constant
hazardous noise
Filter
E-A-R
Classic™ Plus
Metal Detectable
Earplugs
™
E-A-Rsoft
Yellow Neons™
Metal Detectable
™
E-A-R Express
Metal Detectable
Pod Plugs™
™
™
E-A-R UltraFit
Metal Detectable
Earplugs
™
™
E-A-R™ Push-Ins™ Metal Detectable
Earplugs (NRR 28 dB)
These comfortable protectors feature
encased surgical-grade, stainless steel
ARC Plug™ features a non-linear acoustical design with a calibrated filter
within the plug stem
E-A-R™ Swerve™ Banded
Hearing Protector (NRR 28 dB)
ball bearings and are formulated with metal particles. The
Comfort meets performance when the
result is rust-free performance and high detection by most
Swerve™ banded hearing protector
metal-sensing systems.
incorporates a cutting-edge band design with the proven
effectiveness of E-A-R™ foam earplugs. The result is banded
hearing protection like you’ve never seen, heard, or felt before.
Research suggests that many users will receive less noise reduction than indicated by
the NRR due to variation in earplug fit and wearing time. It is recommended that the NRR
be reduced by 50% for estimating the average amount of noise reduction provided.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
32
3M™ Hearing Protection
Peltor™ Optime™ Earmuffs
Choosing the right earmuff for workers is a critical decision.
A muff with too little attenuation leaves workers vulnerable
to noise induced hearing damage. One with too high of a
protection level can “overprotect” and make it difficult to hear
voices, signals, and make a worker feel isolated. Now there’s
an easy solution. Just match the numbers to the noise levels.
Optime™ 95
with headband
Optime™ 95 neckband
for behind-the-head wear
Optime™ 95
folding
Optime™ 95 helmetattachable earmuffs
Peltor™ Next™ Earplugs
Peltor™ Optime™ 95 Earmuff (NRR 21 dB)
•Very low profile ear cups, fits well with
most helmets, eyewear, and other
safety equipment
Young workers don’t want what was. They want what’s next.
•When TWA noise levels reach
up to 95 dB
hearing protection. Simply put, they don’t want “yesterday’s”
Bright colors. Different shapes. Easy-use features. Today’s
younger workforce can be a challenging group to get to wear
plugs. They want new.
Peltor™ Optime™ 98 Earmuff (NRR 25 dB)
•When TWA noise levels reach
up to 98 dB
Peltor™ Optime™ 101 Series (NRR 27 dB)
•When TWA noise levels reach up to
101 dB
Peltor™ Next™ Skull
Screws™ Earplugs (NRR 30 dB)
Grab young workers by the ears with
metallic-look foam and screw grip.
Peltor™ Optime™ 105 Earmuff (NRR 30 dB)
•Developed for protection in demanding
noise environments
These plugs bring a new radical attitude
to the workplace that’s sure to boost weartime with
younger workers.
•Highest NRR available in over-the-head
style earmuffs from 3M (NRR 30 dB)
Peltor™ Next™ No-Touch™
Foam Earplugs (NRR 29 dB)
•A unique “double-shell” earcup design
(two cups connected via a foam inner
layer to reduce structural resonances)
Hands off the foam. What could
•When TWA noise levels reach
up to 105 dB
be easier?
Peltor™ Next™ Tri-Flange™
Earplugs (NRR 26 dB)
Multiple Seals, Multiple Uses.
Research suggests that many users will receive less noise reduction than indicated by
the NRR due to variation in earplug fit and wearing time. It is recommended that the NRR
be reduced by 50% for estimating the average amount of noise reduction provided.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
33
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
E-A-R™ BUDS™ Headphones (NRR 26 dB)
Training Materials
Now you can hear your music while you
All of these training materials are offered at no cost
work with the new, MP3 compatible,
to 3M customers:
noise isolating, E-A-R™ BUDS™
•Earful of Sound Advice – Employee training pamphlet on
hearing protection
Headphones. These give workers
the protection they need AND the
entertainment they want. Safety never
sounded so good.
•Ultra-comfortable design
•Convenient, easy-access volume control
•Tips and Tools for Fitting and Using E-A-R™ Foam
Earplugs – Earplug instruction booklet
•E-A-R Classic Earplug Poster – Provides easy to
understand, 3-step process for fitting classic earplugs
All training materials, with the exception of the DVD, can be downloaded directly
from www.e-a-r.com/hearingconservation.
•Speaker volume limited to 82 dB
Hearing Conservation Resources
HearForce™ Training
Free on-site employee hearing conservation training provided
Other Hearing Protection
Products From 3M
by your 3M Hearing Conservation (HC) Specialist.
3M™ Earplugs
Foam Earplugs 1100 (NRR 29 dB)
•Helps employers meet annual OSHA Requirement 1910.95
Soft, foam earplugs conform to the
•Contact your local 3M HC Specialists to schedule a
training session
•Download the HearForce™ brochure from
www.hearforcetraining.com
shape of the ear for a comfortable,
consistent fit.
Corded Foam Earplugs 1110 (NRR 29 dB)
Foam earplugs are also available with a cord that drapes
around the neck, enabling workers to remove and reinsert
plugs repeatedly during the work day.
Research suggests that many users will receive less noise reduction than indicated by
the NRR due to variation in earplug fit and wearing time. It is recommended that the NRR
be reduced by 50% for estimating the average amount of noise reduction provided.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
34
3M™ Eye Protection
Smart Lens™ Photochromic Eyewear
It changes so workers don’t need to. The days of buying indoor
and outdoor safety eyewear are over. Let there be light. Let there
be dark. Let there be Smart Lens™ Photochromic Eyewear.
Be Smart with Smart Lens™ Photochromic Eyewear
Safety directors should assess their particular workplace and
Orange County Choppers™
Safety Eyewear
ensure that all people wearing Smart Lens™ photochromic
eyewear are aware of the time required for the lens transition.
The coolest eyewear line just got cooler.
Special care should be taken when moving from outdoors to
Inspired by the internationally popular
indoors. Outdoor temperatures may affect lens transition time.
TV show, Orange County Choppers Safety Eyewear has the
™
edgy styling and solid performance which lets you hold on
Light Vision™ 2 Safety Eyewear
tight and take compliance for a ride!
The brightest idea in safety eyewear.
Metaliks™ Safety Eyewear
A distinctive contemporary look, metal
frames and comfortable spatula temples
set the Metaliks™ family of safety
eyewear apart from the competition.
Don’t be left in the dark anymore. Light
Vision™ 2 Safety Eyewear has lights
mounted on each temple to provide
hands-free task lighting. The LED systems provide ultra-bright
beams and swivel/adjust for directional convenience. Of course,
this lighting advantage is coupled with impact protection.
BX™ Safety Eyewear
Moon Dawg™ Safety Sun Wear
Moon Dawg™ eyewear proves that safety
can look cool. Protect wearers’ eyes and
their image with these surf-inspired safety
eyewear; ideal for outdoor safety sun wear.
BX™ Safety Eyewear adjusts to the
workers, instead of workers having to
adjust to it. With many adjustable features,
BX™ eyewear provides a better fit, which
can help your workers have a better
attitude towards wearing their eyewear.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
35
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Fuel™ Protective Eyewear
Lexa™ Safety Eyewear
Tired of running on empty? Pump up
Lexa™ Safety Eyewear provides a unique
compliance levels with Fuel™.
combination of performance, comfort,
fit, and application versatility. Lexa
•Sleek, universal-fit design
safety eyewear is a patented eyewear system with individual
•Three hot colors
solutions for specific eye protection problems. The Lexa safety
•Flared accents
eyewear system includes task-specific lens tints and shades,
•Soft temple tips and nosebridge
including the indoor/outdoor mirror lens with no backside
•Meets the high impact requirements of ANSI Z87.1-2003
reflection and the MinimIzeR™ lens which helps reduce
Refine™ Women’s Safety Eyewear
Better fit means better protection.
Refine Safety Eyewear is specially
™
sized for the female profile. Designed
to fit closer and more proportionally
to the eyes, cheeks, and brow. The result is better coverage
workers’ exposure to welder’s “flash burn.” Plus, Lexa safety
eyewear can be transformed into a dust or splash goggle with
GoggleGear™ accessories, which makes it a true eyewear
system. And now, we’ve improved upon this system with the
addition of diopter reader lenses.
•Meets the high impact requirements of ANSI Z87.1-2003
and CSA Z94.3-2007
with fewer gaps to help prevent dangerous flying debris from
Virtua™ Safety Eyewear
reaching eyes. Refine your style, refine your view on safety.
Versatile, value, Virtua™ Safety Eyewear.
Privo Safety Eyewear
•Sleek European-inspired styling
™
•Soft molded nosebridge and temple
tips for all day comfort
•Tough durable polycarbonate lens absorbs 99.9% UV
The Virtua safety eyewear line combines
outstanding style, protection and
affordability. With numerous frame styles, lens tints and coatings,
adjustability features and coverage profiles, the Virtua safety
eyewear line can meet the needs for eye protection requirements.
•Anti-fog lenses
Virtua™ V4 Eyewear
•Meets the requirements of ANSI Z87.1-2003 and
CSA Z94.3-2007
Virtua™ V4 Eyewear delivers excellent
protection with contemporary styling at
Maxim™ Safety Eyewear
Tough by design, Maxim Safety
™
Eyewear has more lens choices for more
applications. Without sacrificing style,
an economical price.
•Soft, dual injected temples for comfortable all day wear
•Popular unisex styling
comfort, or fit, even the toughest standards are pushed to the
•Rugged polycarbonate lens construction
max with Maxim safety eyewear.
•Lightweight
•Meets the high impact requirements of ANSI Z87.1-2003
and CSA Z94.3-2007
•Absorbs 99.9% UV
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
•Meets the requirements of ANSI Z87.1-2003
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
36
3M™ Eye Protection
Maxim™ 2 x 2 Goggle
•Dual lens design for improved sight
and comfort
•Air seal for comfort and protection
•Excellent orbital eye coverage and wide field of vision
•Meets the requirements of ANSI Z87.1-2003
•Ventilation for improved circulation and reduced fogging
•Anti-fog coating
Modul-R™ Goggle
•Low profile goggle with wide field
of vision
•Clear anti-fog lens
Tour-Guard™ Safety Eyewear
Tour-Guard™ Safety Eyewear is an
economical choice when you need
safety glasses for visitors. Tour-Guard
eyewear can be worn alone or the design allows it to fit over
most prescription glasses.
•Neoprene adjustable strap
•Vented impact visor
•Light, durable polycarbonate impact visor option
•Visor features a flip-up, stand-by position
•Meets the requirements of ANSI Z89.1 2003
Centurion™ Goggles
With a wide-angle wrap around design,
Centurion™ Goggles offer exceptional
“side-to-side” peripheral vision. This
“open” viewing range gives workers a non-restrictive feel and
helps promote longer wear time.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
37
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Head and Face Protection
3M™ XLR8™ Hard Hats
•Lightweight, well-balanced design
3M™ Total Performance Faceshields
•Easy-Change™ replacement system
•Universal accessory slots for use
with a wide variety of eye, face and
hearing protection products
•Only compatible with
3M™ H-Series headgear
•Four or six-point, pinlock or ratchet
suspension
•Colors: white, yellow, blue, hi-viz
orange, orange, red or green
3M H8A Ratchet Headgear
•Thermoplastic crown for impact
protection
™
•Ratchet adjustment for precise fit
and comfort
•Five-position crown strap
3M™ H24M Universal
Cap-Mount Headgear
•Attachment feature does not interfere
with cap-mounted ear muffs
•Two-position system locks shield up
and out of place when not in use
•Fits securely to hard hat brim – keeps
falling particulates and debris out
3M™ Faceshields
•Easy-Change™ replacement system
•Only compatible with
3M™ H-Series headgear
•Anti-Fog coating inside /
Hard-Coat outside
•Available in clear, medium green or
gold-plated models
3M™ Forestry Kits
•Provide head, face and hearing
protection
•Designed for lumber and agricultural
industries
Realtree Hardwoods HD® Hard Hats
•Popular camouflage design
•Lifelike reproduction of natural foliage
•Ideal for safety awards or gifts
•Meets the requirements of ANSI
Z89.1 2003 Type 1 Class C, G and E
Orange County Choppers™ Hard Hat
•Unique carbon fiber pattern in black
•Emblazoned with popular OCC™ logo
•Ideal for safety awards or gifts
•Meets the requirements of ANSI
Z89.1 2003 Type 1 Class C, G and E
•Polycarbonate, propionate, acetate or
mesh construction
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
38
Peltor™ Communications
Peltor
Peltor is a leader in 2-way communication products for use in high noise
environments. Our dedication to offering quality products began over 50 years ago
in Scandinavia. Today, the extensive Peltor line offers a broad selection of personal
safety headsets and 2-way radio accessory products for use in military, law
enforcement, hunting, sport shooting, aviation, racing and manufacturing environments.
From our preferred tactical hearing protectors to our self-contained 2-way radio headsets, all Peltor products offer exceptional
quality and performance and offer solutions to high noise communication. By incorporating the latest technological advances in
electronics, materials and designs, our products are among the most innovative in the industry.
Innovation. Experience. Quality. Comfort. All reasons why Peltor is the Sound Solution!
Intergrated 2-way Radio Headsets
Noise Attenuating Communication Headsets
Peltor’s family of integrated radio
Peltor’s headsets are designed for
headsets are designed with your
industrial users working in high noise
business productivity in mind.
environments.
Always innovative and quick to incorporate the latest in
They offer the versatility along with the protection, durability
electronics in our products, Peltor has achieved the ultimate
and comfort that you expect from a leader in communication
in a communication product by combining a headset and
headsets.
2-way radio all in one. The PowerCom™ series offers the most
versatile set of features including frequency reprogramming
and up to 2 miles of transmitting power and range, ideal for
use in environments where long distance communicating is
a must and environmental conditions change. The LiteCom™
series offers features ideal for short range communicating
(200 yards), and fixed environmental conditions.
This family of integrated 2-way radio headsets is the perfect
tool for communicating in higher noise environments. Simple to
operate and comfortable to wear, these headsets offer numerous
features that may help to improve workplace efficiency.
Clean, reliable communication is essential, and sometimes life
threatening, in any high noise radio communication environment.
That is why Peltor uses the latest technologies in both earcup
design and electronics. All Peltor headsets have the highest
quality audio and transmit specifications enhancing the
communication capabilities of the user and making them the ideal
choice for demanding industries such as:
•Heavy equipment operation
•Construction
•Manufacturing
•Agriculture
•Racing
•Forestry
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
39
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Listen-only Headset Solutions
the exterior aircraft intercom jack. Communication options
Lightweight communication options with
include an in-line belt station, mounted push-to-talk (PTT) or
heavy-duty performance.
wireless Bluetooth.
PTL Listen-Only – “Push to listen” ambient listening electronic
AM/FM Radio Headsets
technology. The electronics are turned on and off with the
AM/FM Radio & Hearing Protector all-in-one!
touch of a button located on the side of the earcup. In the
other earcup is a speaker with an audio jack for plugging
into lapel microphone audio jacks or CD/MP3 players. The
PTL electronics will stay on for 30 seconds and then turn off
automatically unless pressed again. Ideal application for workers
in environments where intermittent ambient listening is required.
Lapel Mic – Allows users to conveniently transmit and receive
radio messages remotely. It features an ergonomic low profile
design with an 8 position, 360 degree swivel clothes clip. Ideal
for users that do not wish to hold or remove a 2-way radio
from their belt in order to transmit or hear instructions.
Protect your hearing and listen to the radio
at the same time! These lightweight, comfortable headsets,
make the perfect accessory for working safely in the
workshop, on the job, in the yard, or at the races!
With Peltor’s AM/FM radio headsets, you can tune in, protect
your ears, and keep your hands free. Instead of the nerveracking and potentially harmful noise of power tools, lawn
mowers, or working noise, you choose your favorite music,
sports, news, or talk show station. Just put it on to tune out
the noise and tune in the enjoyment.
Tactical Hearing Protectors
HearPlugs – Lightweight listen-only earpieces feature the
The “Listening” Muffs That Help Protect
unique combination of high-quality audio reception with your
Against Harmful Noise While Amplifying Low
choice of noise-isolating earpieces: reusable (NRR 21 dB) or
Level Sounds.
soft foam (NRR 29 dB). HearPlugs help improve the ability of
the wearer to hear audio signals in noisy situations by blocking The Tactical line of hearing protectors from Peltor are designed
to give shooters the best of both worlds: Protection from
ambient noise.
Ground Support Headsets
Peltor has led the way in two-way headsets
by combining state-of-the-art electronics and
hearing protection to provide outstanding
communication capabilities in high noise environments.
Airports around the world depend on Peltor for reliable, glitch
free, easy-to-use performance.
Peltor Ground Mechanic Headsets are designed to provide
clear communications and hearing protection during aircraft
push-back and ground support operations by plugging into
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
dangerous impulse noise such as gunfire, along with the
distortion-free amplification of low level sounds such as range
commands and conversation.
Tactical Hearing Protectors combine the high performance of
our passive muff with advanced electronics. Wearers can hear
low level sounds with remarkable clarity, but when dangerous
noises occur the electronics limit the noise.
The performance of the Tactical Hearing Protectors from
Peltor has led the way in the hearing protection industry for
years with products for law enforcement, the military, and
shooters all over the world.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
40
3M™ SafeWaze™ Fall Protection
3M™ SafeWaze™ Fall Protection Products have earned the
confidence of companies and workers across the country by
offering a broad line of fall protection products and systems
in the industry. Our quality control manufacturing combined
with destructive lot testing helps ensure product reliability
and performance in the field. We’re committed to meeting
your unique fall protection needs with our focus on custom
solutions for your job site.
3M™ SafeWaze™ Harnesses
3M™ SafeWaze™ Harnesses
Ameba™ Harness
Fall protection full body harnesses are
The Ameba™ Harness is designed
the most personal component of any
with a special non-elastic helical yarn
fall protection system. Added comfort
webbing that stretches and moves with
features include targeted padding and
wearers for non-binding mobility. Unlike
quick adjustment hardware. These
competitive harnesses that utilize elastic
features can help increase worker
blend webbing, the Ameba harness
productivity and safety by making the
maintains its structural integrity during
harness easier to wear and fit properly.
a fall which limits the total fall distance.
Elavation™ Harness
This harness incorporates advanced
ideas that make fitting, adjusting and
The Ameba harness is rated at 400 lbs. and is tested to
OSHA 1910.66, OSHA 1926.502, ANSI Z359.1-2007, and
CSA Z259.10-06 standards for fall arrest.
wearing a full body harness more natural
SafeLight™ Harness
for the wearer.
The SafeLight™ Harness features quality
The harness is rated at 400 lbs.
and tested to OSHA 1910.66, OSHA
construction at an economical price for
an excellent value.
1926.502, ANSI Z359.1-2007, and CSA
Z259.10-06 standards for fall arrest.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
41
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ SafeWaze™ Harnesses
Elavation™ Harness
Model
Web Material
Back
D-Ring
Waist
D-Rings
7510
9.5K Min Polyester
•
7511
9.5K Min Polyester
•
•
7512
9.5K Min Polyester
•
•
7550
9.5K Min Polyester
•
7551
9.5K Min Polyester
•
•
7552
9.5K Min Polyester
•
•
WM7510*
9.5K Min Polyester
•
Waist Pad/
Tool Belt
•
•
Chest
Connection
Leg
Connection
Comfort Pad
Lanyard
Clip
Sizes
Quick Connect
Quick Connect
Shoulders/Legs
•
S-M, L-XL, XXL
Quick Connect
Quick Connect
Shoulders/Legs
•
S-M, L-XL, XXL
Quick Connect
Quick Connect
Shoulders/Legs
•
S, M, L, XL, XXL
Quick Connect
Grommet
Shoulders/Legs
•
S-M, L-XL, XXL
Quick Connect
Grommet
Shoulders/Legs
•
S-M, L-XL, XXL
Quick Connect
Grommet
Shoulders/Legs
•
S, M, L, XL, XXL
Quick Connect
Quick Connect
Shoulders/Legs
•
S, M, L, XL, XXL
Icons
Ameba™ Harness**
Model
Web Material
Back
D-Ring
Waist
D-Rings
Waist Pad/
Tool Belt
Chest
Connection
Leg
Connection
Comfort Pad
Lanyard
Clip
Sizes
Ameba 1311
6K Min Polyester
•
•
•
Mating
Grommet
Shoulders
•
S, M, L, XL, XXL
Ameba 1410
6K Min Polyester
•
Mating
Mating
Shoulders
•
S-M, L-XL, XXL
Ameba 1411
6K Min Polyester
•
Mating
Mating
Shoulders
•
S-M, L-XL, XXL
Ameba 1450
6K Min Polyester
•
Mating
Grommet
Shoulders
•
S-M, L-XL, XXL
Ameba 1451
6K Min Polyester
•
•
Mating
Grommet
Shoulders
•
S-M, L-XL, XXL
Waist
D-Rings
Chest
Connection
Leg
Connection
Waist Pad/
Tool Belt
Weight
Capacity
Sizes
Mating
Mating
310
Universal
Mating
Mating
310
Universal
Mating
Grommet
310
Universal
Mating
Grommet
310
Universal
•
Mating
Grommet
310
Universal
•
Mating
Grommet
310
Universal
Mating
Grommet
310
Universal
•
Icons
SafeLight™ Harness
Model
Web Material
Back
D-Ring
10910
6K Min Polyester
•
10911
6K Min Polyester
•
10950
6K Min Polyester
•
10951
6K Min Polyester
•
10650
6K Min Polyester
•
10651
6K Min Polyester
•
•
10952
6K Min Polyester
•
•
Front
D-Ring
•
•
•
Icons
*Includes seat strap with D-Rings.
* *Note that product code includes “Ameba” (i.e. order as Ameba 1311).
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
42
3M™ SafeWaze™ Fall Protection
3M™ SafeWaze™ Fall Protection Connecting Devices and Retractables
and 3M™ SafeWaze™ Lanyards
3M™ SafeWaze™ Fall Protection
Connecting Devices and Retractables
Fall Protection Connecting Devices
3M™ SafeWaze™ Lanyards
SafeLight™ Lanyards
(209712, 209712-0241, 209750,
Connecting devices link the wearer
209750-0241) These lanyards employ
to an anchor point as part of a
a convenient low-profile design for
complete fall protection system.
wearer comfort. The energy absorbing
In the event of a fall, connecting
devices act as an energy absorber. They help protect
workers by reducing the arresting force applied to a
workers body to within safe limits.
ReLoad Retractable
™
The ReLoad™ Retractable combines
innovative design, superior
materials, and the ability to be
serviced in the field. It is one of the
most advanced retractable lifelines available today.
technology has been designed into the
core of the lanyard, eliminating the need for an external shock
pack. Impact indicators are exposed in the event of a fall to
aid the identification of lanyards that must be removed
from service.
Elavation™ 400 lb. Rated Lanyards
(409712, 409712-0241, 409750,
409750-0241) Elavation™ Lanyards
feature the same convenient low-profile
design as SafeLight™ Lanyards with one
Field Serviceability – The ReLoad retractable’s innovative
major improvement; Elavation™ lanyards are rated to 400 lbs.
modular design allows for quick and easy inspection
These unique 400 lb. rated low-profile lanyards are the perfect
and repair of key component parts including the housing
complement to the 400 lb. rated Elavation™ harness offering.
and labels, lifeline and snap-hook, and energy absorber.
SafeAbsorb™ XTRA Lanyards
When a unit is inspected and/or serviced by a certified
(4712-6, 4712-6-0241, 4750, 4750-
technician, that service/inspection is considered a
0241) These lanyards are the ideal
complete recertification of that retractable.
choice when lanyard length can pose a
Self-Retracting Lifelines –
SafeWaze™ Retractables
trip hazard. The innovative elastic jacket
SafeWaze™ Retractables combine
stretches from 4' to 6' which helps
a high-strength housing for usage
prevent lanyard entanglement.
of the SafeAbsorb™ XTRA Lanyards
extending durability with a rugged
internal chassis that is rated for use
up to 400 lbs. Smart design features including a swivel top
and spring-cushion cable guide improve product performance
and make SafeWaze retractables a popular choice.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
43
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ SafeWaze™ Fall Protection Connecting Devices and Retractables
ReLoad™ Retractable
Model
Size
Length
Lifeline
Connector
Weight
REW-7
5.2" x 4.0" x 7.0"
7'
3/4" Web
Double Locking Snap Hook
4.0 lbs.
REW-12
7.0" x 4.8" x 9.1"
12'
1" Web
Double Locking Snap Hook
7.0 lbs.
REW-23
7.5" x 4.6" x 11.1"
23'
1" Web
Double Locking Snap Hook
11.0 lbs.
REC-23
8.0" x 5.0" x 11.5"
23'
3/16" Galvanized Steel Cable
Double Locking Snap Hook
12.0 lbs.
REC-30
8.0" x 5.5" x 12.0"
30'
3/16" Galvanized Steel Cable
Double Locking Snap Hook
13.0 lbs.
REC-40
8.5" x 6.0" x 12.5"
40'
3/16" Galvanized Steel Cable
Double Locking Snap Hook
15.0 lbs.
REC-50
8.5" x 6.0" x 13.0"
50'
3/16" Galvanized Steel Cable
Double Locking Snap Hook
17.0 lbs.
Self-Retracting Lifelines – SafeWaze™ Retractables
Model
Housing
Length
Lifeline
Housing Hardware
Line Hardware
Weight
M-15
Aluminum Alloy
15'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
5.7 lbs.
M-20
Aluminum Alloy
20'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
7.3 lbs.
M-30
Aluminum Alloy
30'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
8.6 lbs.
M-40
Aluminum Alloy
40'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
11.7 lbs.
M-50
Aluminum Alloy
50'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
16.25 lbs.
M-65
Aluminum Alloy
65'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
19.1 lbs.
M-75
Aluminum Alloy
75'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
19.1 lbs.
M-100
Aluminum Alloy
100'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
38.5 lbs.
M-130
Aluminum Alloy
130'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
86 lbs.
Weight
Self-Retracting Lifelines – SafeWaze Retractables
™
Model
Housing
Length
Lifeline
Housing Hardware
Line Hardware
RLD-10A*
Anti-Shock Polymer
10'
3/16" Galvanized Steel Cable
Steel Carabiner
Aluminum Snap hook
3.7 lbs.
RLD-10A-0241H*
Anti-Shock Polymer
10'
3/16" Galvanized Steel Cable
Rebar Hook
Aluminum Snap hook
3.7 lbs.
RLD-10S
Anti-Shock Polymer
10'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
3.7 lbs.
RLD-10S-0241H
Anti-Shock Polymer
10'
3/16" Galvanized Steel Cable
Rebar Hook
Snap hook
8.6 lbs.
RLD-10-0241
Anti-Shock Polymer
10'
3/16" Galvanized Steel Cable
Steel Carabiner
Rebar Hook
8.6 lbs.
RLD-20
Anti-Shock Polymer
20'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
11.7 lbs.
RLD-30
Anti-Shock Polymer
30'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
16.25 lbs.
RLD-40
Anti-Shock Polymer
40'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
19.1 lbs.
RLD-50
Anti-Shock Polymer
50'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
19.1 lbs.
RLD-65
Anti-Shock Polymer
65'
3/16" Galvanized Steel Cable
Steel Carabiner
Snap hook
38.5 lbs.
Self-Retracting Lifelines – SafeWaze™ Retractables
Model
Housing
Length
Lifeline
Housing Hardware
Line Hardware
Weight
MS-11
Aluminum Alloy
11'
Dynema Web
Steel Carabiner
Snap hook
3.5 lbs.
MS-11/0241
Aluminum Alloy
11'
Dynema Web
Steel Carabiner
Snap hook
3.5 lbs.
MS-16
Anti-Shock Polymer
16'
Dynema Web
Steel Carabiner
Snap hook
3.5 lbs.
MS-20
Anti-Shock Polymer
20'
Dynema Web
Steel Carabiner
Snap hook
5.0 lbs.
MS-25
Anti-Shock Polymer
25'
Dynema Web
Steel Carabiner
Snap hook
6.5 lbs.
MS-30
Anti-Shock Polymer
30'
Dynema Web
Steel Carabiner
Snap hook
6.0 lbs.
MS-40
Anti-Shock Polymer
40'
Dynema Web
Steel Carabiner
Snap hook
11.5 lbs.
MS-50
Anti-Shock Polymer
50'
Dynema Web
Steel Carabiner
Snap hook
12.0 lbs.
*OSHA Approved.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
44
3M™ SafeWaze™ Fall Protection
3M™ SafeWaze™ Lanyards
SafeLight™ Lanyards
Model
Web Material
Length
Shock Type
Color
Snap
Hooks
209712
Integral Core Nylon
6 ft.
Integrated Core
Yellow
••
209712-0241
Integral Core Nylon
6 ft.
Integrated Core
Yellow
•
209750
Integral Core Nylon
6 ft.
Integrated Core
Yellow
•••
209750-0241
Integral Core Nylon
6 ft.
Integrated Core
Yellow
•
Rebar Hook 2.75"
•
Hardware
100% Tie Off
Weight
Capacity
Stamped Steel
310
Stamped Steel
310
Stamped Steel
•
310
••
Stamped Steel
•
310
Rebar Hook 2.75"
Hardware
100% Tie Off
Weight
Capacity
Elavation™ 400 lb. Rated Lanyards
Model
Web Material
Length
Shock Type
Color
Snap
Hooks
409712
Integral Core Nylon
6 ft.
Integrated Core
Tan
••
409712-0241
Integral Core Nylon
6 ft.
Integrated Core
Tan
•
409750
Integral Core Nylon
6 ft.
Integrated Core
Tan
•••
409750-0241
Integral Core Nylon
6 ft.
Integrated Core
Tan
•
•
••
Stamped Steel
400
Stamped Steel
400
Stamped Steel
•
400
Stamped Steel
•
400
Hardware
100% Tie Off
Weight
Capacity
SafeAbsorb™ XTRA Lanyards
Model
Web Material
Length
Shock Type
Snap Hooks
4712-6
Integral Core Polyester
4-6 ft.
Integrated Core
••
4712-6-0241
Integral Core Polyester
4-6 ft.
Integrated Core
•
4750
Integral Core Polyester
4-6 ft.
Integrated Core
•••
4750/0241
Integral Core Polyester
4-6 ft.
Integrated Core
•
Rebar Hook 2.75"
•
••
Stamped Steel
310
Stamped Steel
310
Stamped Steel
•
310
Stamped Steel
•
310
3M™ SafeWaze™ Anchors and Kinetic™ Confined Space Rescue System (see next page)
3M™ SafeWaze™ Anchors
Kinetic™ Confined Space Rescue System
Model
Description
4000
Reusable Roof Anchor
CON-2002
Kinetic Davit Arm
4550
6' Web Cross Arm Strap
CON-2108
Safety Barricade 42" (Does not require mast)
4650-2
BeamWalk Mobile Anchor
CON-2003
Davit Arm Mast
SafeClaw Reusable Concrete Anchor
CON-2118
H-Base Mast Adaptor
CON-2005
Floor Mount Mast Adaptor
CON-2006
Flush Floor Mast Adaptor
4075
Model
CON-205G-50
CON-142G
Description
3-Way SRL Retrieval Device with Adaptor Hardware
65' Winch with Adaptor Hardware
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
45
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ SafeWaze™ Fall Protection
3M™ SafeWaze™ Anchors
3M™ SafeWaze™ Fall Protection Kits
Anchorage devices provide the
We have developed a creative assortment
necessary tie-off point to complete a fall
of fall protection kits that are portable
protection system. SafeWaze™ temporary
and convenient. These safety kits enable
anchorage devices are each rated to
a worker to maintain inventory and
5000 lbs. to withstand the substantial
maintenance of equipment, and the tool
forces applied during a fall. By offering a
bags can be customized with individual
diverse line of both fabricated and web
based anchorage options, we are able to
provide an anchor for most any job site.
distributor or end-user logos.
Aerial Lift Kits
Lift kits provide users with a harness
Kinetic™ Confined Space Rescue System
and lanyard for basic fall protection,
Kinetic™ is a confined space
and are intended to be used with
rescue/retrieval system that is
bucket trucks, scissor lifts, and other
quick to assemble, lightweight and
equipment that provides a built-in tie-off
maneuverable, and provides the
anchorage point.
solution for many confined space
Roofing Kits
rescue applications.
Roofing kits provide a complete fall
When seconds count, the Kinetic™ confined space rescue
protection system in a convenient bucket
system provides the following advantages:
or duffle bag. Included in roofing kits are
•Setup in under 3 minutes thanks to the system’s Kinetic
patented two-piece gate and davit arm assembly
•Lightweight design that utilizes Duralcan® Composite Metal
•OSHA-mandated barricade gate that restricts access
to exposed entry points
a full body harness, shock-absorbing
lanyard, anchor device and a synthetic
rope lifeline with a rope grab. These kits
take the guess work out of compliance
and help simplify fall protection at a competitive price.
The Kinetic™ confined space rescue system is also available
in a number of other mounting systems to meet a variety of
different industrial and utility applications.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
46
3M™ Speedglas™ Auto-Darkening
Filters (ADFs) and Helmets
Safety Products That Can Help Increase Welding Performance
Now welders can see their work at comfortable light levels, with eye and face
protection. Speedglas™ Auto-Darkening Filters from 3M turn dark the moment an
arc is struck and return to light state (shade 3) again when welding stops, while
maintaining UV/IR protection.
Auto-darkening helps to eliminate the neck-strain of “helmet nodding” while helping
increase the accuracy of electrode placement.
This, in turn, helps reduce the need for grinding and rework. In addition, welders
can get into tight, cramped spaces and have a clear view, making extremely awkward welds a lot easier and safer.
Important: Welding can create a variety of harmful fumes and gases. When engineering controls are impractical, respirators
may be required to help reduce exposures to these airborne welding contaminants.
UV/IR Protection
Welding Helmets That “Breathe”
This component of the filter assembly
The revolutionary Speedglas™ Helmet
provides the same UV/IR protection as
9000 from 3M features patented
a traditional shade 13 filter plate
aerodynamic exhaust vents that help
(as regulated by USA and Canadian
to enhance the flow of exhaled air.
welding safety standards).
Note: Because faceshields and welding helmets can be raised
Note: Exhaust vents are not available on the 3M™ Speedglas™
Utility Filter and Helmet model.
from the normal position, ANSI Z87.1-2003 states that safety
glasses must be used in conjunction with these helmets.
Speedglas™
• Sealed button membrane protects digital controls.
• Custom, multi-function programmed logic chip
minimizes components and increases reliability.
• Silicone coating protects critical components.
• Sensors mounted on circuit board minimize
electromagnetic noise interference from LC,
increasing low amp arc detection capability.
• Filter elements are bonded with optical adhesive for
minimum distortion and maximum strength.
• Large side margins increase durability and help
protect filter elements.
• Replaceable batteries in all models.
• Sealed button membrane protects digital controls.
Brand A
• A nalog controls are fragile and prone to moisture and
particle infiltration.
• Excessive wiring and circuitry components increase the
potential for signal interference and connection failure.
• S pray coated or unprotected circuit board components
are vulnerable to contamination.
Brand B
• Basic electronics may have difficulty detecting certain
arc welding processes.
• Un-bonded filter elements reduce optical clarity and
are less durable.
• Standard 4.5" × 5.25" format leaves little room on
sides to protect glass filter from impact or twisting.
• Non-replaceable batteries eventually go dead and the
lens becomes non-functional.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
47
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Speedglas™ Auto-Darkening Filters and Helmets
Ideal for Weld Prep/Grinding
Helmets with SideWindows Improve
Visibility, Safety and Comfort
The 3M™ Speedglas™ FlexView System
3M Speedglas Welding Helmets with
™
™
has a big 4.7 in. × 3.6 in. (120mm ×
SideWindows allow for peripheral vision.
The two shade 5 side filters increase the
peripheral viewing area by over 100%.
90mm) clear polycarbonate faceshield
that’s ideal for precision weld preparation work under a
variety of lighting conditions. The user simply lifts up the
SideWindows filters allow welders to see potentially-
spring-mounted Speedglas filter assembly for weld prep. The
hazardous peripheral objects, such as moving equipment,
faceshield meets the ANSI Z87.1-2003 industrial eye and face
vehicles, and other welders, with the helmet down.
protection standard.
The two side filters are designed
A Balanced Hard hat for Welders
solely for peripheral vision; the welder
The 3M™ Speedglas™ ProTop System has
continues to view his own arc through
an exclusive pivot mechanism that “nests”
the center (auto-darkening) filter.
the welding helmet down low over the
hard hat, in a balanced, secure position.
The lower center-of-gravity helps reduce neck strain.
NEW!
3M Speedglas 100 Welding Helmet
™
™
The new Speedglas™ 100 series welding helmet delivers outstanding protection, comfort and performance
with seven distinctive graphic designs.
3M™ Speedglas™ 100
Blazed (07-0012-31BZ)
3M™ Speedglas™ 100
Aces High (07-0012-31AH)
3M™ Speedglas™ 100
American Pride (07-0012-31AP)
3M™ Speedglas™ 100
Chrome* (07-0012-31CH)
3M™ Speedglas™ 100
Mechanical Skull (07-0012-31MS)
3M™ Speedglas™ 100
Trojan Warrior (07-0012-31TW)
3M™ Speedglas™ 100
Tribal (07-0012-31TR)
3M™ Speedglas™ 100
Black (07-0012-31BL)
*Reflected UV light from the chrome finish is absorbed by the clear coat finish. The measured intensity is similar to that of a black helmet.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
48
3M™ Speedglas™ Auto-Darkening
Filters and Helmets
3M™ Speedglas™ Helmets and Auto-Darkening Filters
Speedglas SL
9002D Filter
and Helmet
9000XF Filter
and Helmet
9100 Filter
and Helmet
100 Filter
and Helmet
SL ADF
9002D Filter
9000XF Filter
9100 Filter
100 ADF
• Weighs 13 oz.
(370g) Complete
Assembly
• Available in
Shades 8 to 12
• 4 Sensitivity
Settings
• Auto On/Auto Off
• Dual Shades
10 and 11
• MIG, Stick,
some TIG
• Fixed Shade
• Available in
Shades 10, 11,
or 12
• MIG, Stick,
some TIG
• Large Viewing
Area
• Sensitivity
Adjustment
• Solar Panel
• 9100V, X, XX
• Variable Shade
• Shades 5, 8, 9 to 13
• MIG, Stick, TIG
• 5 Sensitivity
Settings
• Tack Welding
Mode and a
Grinding Mode
• Available in
7 Distinctive
Graphic Designs
• Variable Shade
and Single Shade
• Shades 8 to 12
• MIG, Stick, TIG
SL
9002D
9000XF
9100V, X, XX
05-0013-41
04-0012-15
04-0012-10
06-0100-10
06-0100-20
06-0100-30
Standard Helmet with
SideWindows
N/A
04-0012-15SW
04-0012-10XSW
06-0100-10SW
06-0100-20SW
06-0100-30SW
N/A
ProTop System
N/A
04-0015-15
04-0015-10X
N/A
N/A
ProTop System with SideWindows
N/A
04-0015-15SW
04-0015-10XSW
N/A
N/A
FlexView System
N/A
04-0016-15
04-0016-10X
N/A
N/A
FlexView System with
SideWindows
N/A
04-0016-15SW
04-0016-10XSW
N/A
N/A
FlexView System with ProTop
N/A
04-1516-15
04-1516-10X
N/A
N/A
FlexView System with ProTop and
SideWindows
N/A
04-1516-15SW
04-1516-10XSW
N/A
N/A
Standard Helmet
100
07-0012-31BZ
07-0012-31AH
07-0012-31CH
07-0012-31MS
07-0012-31TW
07-0012-31TR
07-0012-31BL
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
49
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Speedglas™ Eye, Face and Respiratory Protection
Are your employees working in exhausting, hard-to-breathe-in
environments? Let them try one of our many powered air
systems for just a couple of hours. That’s all it takes to realize
how comfortable work can be. Comfort can help lead to more
work time.
3M™ Speedglas™ FlexView for Welding
and Weld Prep/Grinding
The FlexView system combines eye
and face impact protection (ANSI
Z87.1-2003) (for both welding and
non-welding activities) with a slim,
lightweight, powered air purifying respirator. For chipping,
grinding, or preparation, the user simply lifts up the springmounted Speedglas™ filter assembly. The spring holds the autodarkening filter securely on top of the helmet, giving the welder
a clear view through the clear polycarbonate faceshield that
meets the high impact test requirements of ANSI Z87.1-2003.
3M™ Speedglas™ Helmet 9000 HWR Auto-Darkening
Filters (ADF’s) with Respiratory Protection for Welding
Note: Not for paint spraying of flammable substances,
or where intrinsic safety is required.
We’ve reinvented the powered airpurifying respirator (PAPR) for welders.
Note: Because faceshields and welding shields can be raised
The result is 3M™ Speedglas™: a
from the normal position, ANSI Z87.1-2003 states that safety
lightweight, compact, all-in-one system.
glasses must be used in conjunction with these respirators.
Its exclusive “stackable” configuration means that the Adflo™
High Efficiency (HE) Particulate Filter can be combined with a
chemical cartridge for additional protection.
3M™ Speedglas™ Powered and Supplied Air
Protection L-Series
3M now offers a line of Speedglas™
combined systems and helmets. We
have paired the legendary Speedglas
ADF with our best-in-class powered
air purifying respirator and our L-series hard hat to provide
you with unparalleled comfort and protection in the most
demanding environments.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
50
3M™ Speedglas™ with Adflo™ Eye,
Face and Respiratory Protection
Adflo™ System
(HE) with 9000 HWR Helmet
(HE) with 9000 HWR Helmet and SideWindows
(HE) with FlexView System Helmet
(HE) with FlexView System Helmet and SideWindows
9002D
9000XF
9002V
9002X
15-1101-15
15-1101-10X
15-1101-31
15-1101-21
15-1101-15SW
15-1101-10SW
15-1101-31SW
15-1101-21SW
16-1101-15
16-1101-10X
16-1101-31
16-1101-21
16-1101-15SW
16-1101-10SW
16-1101-31SW
16-1101-21SW
Note: The complete 3M™ Adflo™ System Packouts with the organic vapor/acid gas (OV/AG) cartridge are no longer available for
purchase. If a customer needs a high efficiency (HE) system with an OV/AG cartridge (15-0399-99X02 and 15-0399-99X06),
the cartridge must be purchased separately (see Replacement Parts for the 3M™ Adflo Systems).
3M™ Fresh-air II Supplied Air System with
3M™ Speedglas™ Helmet 9000 HWR
The NIOSH-approved supplied air (SA)
9000 system provides respiratory
protection from airborne particulates
and gases. The lightweight, beltmounted valves permit the welder to adjust the temperature of
the air entering the headpiece, making it ideal for very hot or
•V-100 valve permits welder to lower
the temperature of the supplied air by
up to 45°F (25°C).
•V-200 temp-air valve allows either
cooling or warming of the supplied
air +45°F from the supplied air
temperature.
strenuous jobs.
Note: Final determination of respirator applicability and filter
Note: Because faceshields and welding shields can be raised
selection must be made by an on-site safety specialist or
from the normal position ANSI Z87.1-2003 states that safety
industrial hygienist.
glasses must be used in conjunction with these respirators.
NEW!
The 3M™ Speedglas™ Flexview Helmet for use
with powered and supplied air can now be used
with the V-series supplied air valves: V-100, V-200,
V-300 and V-400.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
51
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Speedglas™ with Supplied Air Respiratory Protection
Pick Your ADF
3M™ Speedglas™ Systems:
Fresh-air II Supplied Air Cool-air (CA) System with 9000 HWR Helmet,
Part No. 14-5701-00
Fresh-air II Supplied Air Cool-air (CA) System with 9000 HWR Helmet and
SideWindows, Part No. 14-5701-00SW
Fresh-air II Supplied Air Temp-air (TA) System with 9000 HWR Helmet,
Part No. 14-5801-00
Fresh-air II Supplied Air Temp-air (TA) System with 9000 HWR Helmet and
SideWindows, Part No. 14-5801-00SW
9000XF Shade 10
9000XF Shade 11
9000XF Shade 12
04-0000-10X
04-0000-11X
04-0000-12X
04-0000-10X
04-0000-11X
04-0000-12X
04-0000-10X
04-0000-11X
04-0000-12X
04-0000-10X
04-0000-11X
04-0000-12X
Complete 3M™ Adflo™ PAPR Systems
Part No.
16-0705-SGXX
16-0705-SGX
16-0705-SGV
Description
Quantity
3M Adflo Powered Air Purifying Respirator High Efficiency System, with 3M Helmet L-705SG and Wideview
Faceshield and 3M™ Speedglas™ Auto-Darkening Filter 9100XX.
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-705SG and Wideview
Faceshield and 3M™ Speedglas™ Auto-Darkening Filter 9100X.
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-705SG and Wideview
Faceshield and 3M™ Speedglas™ Auto-Darkening Filter 9100V.
™
™
™
1/Case
1/Case
1/Case
16-0905-SGXX
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-905SG and Wideview
Faceshield and 3M™ Speedglas™ Auto-Darkening Filter 9100XX.
1/Case
16-0905-SGX
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-905SG and Wideview
Faceshield and 3M™ Speedglas™ Auto-Darkening Filter 9100X.
1/Case
16-0905-SGV
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-905SG and Wideview Faceshield
and 3M™ Speedglas™ Auto-Darkening Filter 9100V.
1/Case
All Adflo PAPR systems listed above have an APF of 25.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
52
Respiratory
Protection Options
for Various Welding
Applications
APF²
Maintenance-Free
Elastomeric
Half-Facepiece
Powered Air
Loose-Fitting
Supplied Air Elastomeric
With Dual Airline
Supplied Air
Loose-Fitting
10
10
25/1000³
50
25/1000³
Particles
General Dust
Metal Fume
Steel/Manganese Alloys
Stainless Steel/
Chromium Alloys
Aluminum
Galvanized Steel
Cadmium
4
Lead
4
Gases
Ozone
5
Byproducts of
Combustion of Coatings
5
6
Carbon Monoxide
Carbon Dioxide
Phosgene
Oxides of Nitrogen
2. Assigned Protection Factor (APF) is the level of protection a class of respirator is expected to provide when selected and used properly under real-world conditions. APFs for
each respirator class are listed in the table shown. To determine the maximum concentration of a substance in which a respirator can be used, multiply its APF by the exposure
limit of the substance. APF ratings assume compliance with all required elements of a Respiratory Protection Program.
3. APF = 25 for headgear classified as Loose-fitting. APF = 1000 for headgear classified as Helmets (neck sealing). No fit testing required. Only APF of 25 when used with Adflo.
4. OSHA regulations for these contaminants require the use of NIOSH class 100 particle filters (e.g. P100).
5. 3 M recommended for applications where ozone and nuisance level organic vapors may be present. 3M recommended for ozone protection up to 10 times the OSHA PEL or
applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone. 3M recommended for relief from nuisance levels of organic
vapors. Nuisance level organic vapors refer to concentrations not exceeding the OSHA PEL, or applicable government occupational exposure limits, whichever is lower. Do not
use when concentrations of contaminants are immediately dangerous to life and health or are unknown.
6. The combustion of metal coatings during welding can produce a wide range of particle and vapor contaminants. Seek the advice of a Certified Industrial Hygienist or other
qualified professional when selecting a respirator cartridge for these situations.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
53
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Sorbents
3M™ Sorbents are designed with the total cost in mind. By
maximizing sorbent capacity, labor, disposal and product,
your purchases are minimized—making 3M sorbents the
economical choice.
3M sorbent products are designed to sorb a variety of maintenance
fluids and lubricants, oil and petroleum-based liquids, a wide range
of acids, bases, coolants and other hazardous fluids.
They are lightweight and versatile, and take just minutes to put in
place. Sorbents are available in a wide variety of configurations so
you can get at the source of the leak or spill quickly.
Maintenance Sorbents
Chemical Sorbents
3M™ Maintenance
3M™ Chemical
Sorbents are
Sorbents are powerful
ideal for plant
enough to handle acids
maintenance.
(including hydrofluoric
•Versatile
•Takes just minutes to put in place
acid), bases, coolants,
and most other
hazardous fluids.
•Easier cleanup as compared to granules
•Safer choice because they resist reactions with most
hazardous chemicals
Petroleum Sorbents
3M™ Petroleum
Sorbents are
used extensively
for controlling,
•Will also sorb petroleum-based fluids, helping reduce
storage costs by eliminating the need to stock several
different sorbent types for emergency response
Chemical and Petroleum Spill Kits and Response Packs
cleaning up, and
3M™ Chemical Folded Sorbent Spill Kits
recovering oil and
are perfect for emergency response
petroleum-based liquids from effluent discharge, streams,
flexibility. With all the features of a
ponds, lakes, rivers, and other bodies of water.
3M folded sorbent, they can be used with
•Great for in-plant spills under leaking equipment
and machinery
most hazardous liquids.
•Static resistant petroleum sorbents are also available
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
54
3M™ Software, Fit Test Kits and Training Information
Fit Test Apparatuses and Accessories
3M equipment (FT-10, FT-20,
FT-30 and replacement
supplies) and procedures
provide a simple, direct way to
help meet OSHA qualitative fit
testing requirements. These
products can be used with any
particulate or gas/vapor respirator with a particulate pre-filter
to test face-to-respirator seal. The equipment helps satisfy
respiratory program requirements, and is easy to use during
respiratory training.
Health and Safety Software Library
3M has various health and safety software and on-line
(3M.com/OccSafety) tools to help you not only select the
right type of respirator, but also estimate the service life of
3M™ Respiratory Chemical Cartridges.
Fitting Instruction Videos, Training Programs and Materials
3M offers many programs, materials and services that enable
you to administer a respiratory protection program that helps
you meet OSHA requirements. We can assist you and your
employees by emphasizing the importance of respirator
selection, use, proper fitting procedures, and maintenance.
The fit test works by spraying a sweet or bitter solution into
the hood environment. If the wearer does not detect the test
agent’s taste, an acceptable fit has been demonstrated.
Quantitative Fit Test Respirators
3M™ Quantitative Fit Test Respirators
(8233Q and 8293Q) are products that
provide a simple, direct way to help
meet OSHA quantitative fit testing
requirements. They help satisfy OSHA
respiratory protection program requirements and are easily
used during respirator training.
3M offers several videos (some available in Spanish) that
Note: These devices are to be used exclusively for quantitative
cover the selection and use of our respirators. Additionally,
fit testing. Do not use for respiratory protection.
3M provides posters with easy-to-follow instructions so that
important information is readily available to all employees.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
55
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
3M™ Respirator Medical Evaluations
3M facilitates convenient products
and services to help you achieve
regulatory compliance. Our Respirator
Medical Evaluations are based on OSHA
regulatory compliance requirements to
help optimize your compliance testing
and tracking.
Respirator Medical Evaluations:
On-Line • Mail-In
On-Line Respirator
Medical Evaluations
This easy-to-use questionnaire helps
establish the worker’s clearance level
for using a specific respirator in your
work conditions. It can be completed in
Benefits
15-20 minutes using any computer with
Convenience
•Evaluation can be used with all brands and types of respirators
internet access, and is available every
•Evaluations can be completed using any computer with internet access
schedules. Any respirator brand can
Speed and Productivity
•Most employees do not need to leave the work site
be used. You’ll receive immediate
•Employees and employers receive immediate notification of the results
line recordkeeping to track employee
•Clearance letters will be electronically mailed or faxed to the employer,
and mailed to the employee
status. Available in English and Spanish.
Consistency and Quality
•All employees are evaluated using the same expanded OSHA Respirator
Medical Questionnaire
•Provides recordkeeping of employee clearance status
•Board-certified, occupational medicine physicians complete the reviews
and, where needed, make recommendations to the employee for further
medical testing
day, any time, to fit your employees’
notification of clearance as well as on-
Try an on-line
demo at:
respexam.com
For additional information on this service, please visit respexam.com, call 1-800-383-3393 or contact your local
3M sales representative.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
56
Notes
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
57
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Notes
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
58
Notes
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
59
Before each use of the product, please inspect for any rips, damages, tears, etc.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
Respiratory Products (see pages 1-10, 14-30)
These respirators help protect against certain airborne contaminates. Before
use, the wearer must read and understand the User Instructions provided as a
part of the product packaging. A written respiratory protection program must be
implemented meeting all the requirements of OSHA 1910.134 including training, fit
testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must
be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse
may result in sickness or death. For proper use, see packaging instructions,
supervisor, or call 3M OH&ESD Technical Service in USA at 1-800-243-4630 and
in Canada at 1-800-267-4414.
Eye and Face Products (see pages 35-38)
These eye and face protection products help provide limited eye and face
protection. Misuse or failure to follow warnings and instructions may result
in serious potential injury, including blindness or death. For proper use,
selection, and applications against flying particles, optical radiation and/or splash
see supervisor, read User Instructions and warnings on the package or call
3M OH&ESD Technical Service in the USA at 1-800-243-4630. In Canada,
call 1-800-267-4414.
Hard Hats (see page 38)
Air Monitoring Systems (see page 11)
Do not use for:
• Ammonia, carbon monoxide; ethylene oxide; formaldehyde; hydrogen sulfide;
isocyanates; methane; ethane; propane; methyl alcohol (methanol); methyl
chloride; methyl, dimethyl, trimethyl amines; organic solids; sulphur dioxide
• Reactive or polar compounds such as amines, phenols, aldehydes and low
molecular weight alcohols
• Extremely low concentrations within a sampling period of less than 8 hours
• Particulates
• Ethylene Oxide can be monitored using 3M™ 3550/3551 Ethylene Oxide Monitor.
Formaldehyde can be monitored using 3M™ 3720/3721 Formaldehyde Monitor.
These hard hats provide limited protection only. Misuse or failure to follow
warnings and User Instructions may result in serious personal injury or
death. For proper use, see supervisor, or User Instructions, or call 3M OH&ESD
Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414.
Bumpcaps do not provide protection against impact from falling or glancing
objects nor do they protect against electrical hazards. Bumpcaps do not meet the
requirements of ANSI Z89.1. When head protection is required, wear a protective
hard hat or helmet that meets the requirements of ANSI Z89.1 2003.
Fall Protection Products (see pages 41-46)
Compliant fall protection and emergency rescue systems help prevent serious
injury during fall arrest. Users must read and understand the User Instructions
provided with the product and be properly trained by their employer prior to use
Detection Products (see pages 12-13)
per OSHA 1910.66 and 1926.503 or applicable local standards. Misuse or failure
These instruments help monitor for the presence and concentration level of certain to follow warnings and instructions may result in serious personal injury or
specified airborne gases. Misuse may produce an inaccurate reading which means death. For proper use, see supervisor, User Instructions, or call Technical Service
at 1-800-560-1094.
that higher levels of the gas being monitored may be present and could result in
overexposure and cause sickness or death. For instruments with an oxygen
sensor installed, misuse may produce an inaccurate reading where lower or higher
Welding Helmets (see pages 47-53)
levels of oxygen may be present and cause sickness or death.
Each person using this equipment must read and understand the information in
the User Instructions before use. Use of this equipment by untrained or unqualified
persons, or use that is not in accordance with the User Instructions, may adversely
affect product performance and result in sickness or death. For proper use, see
supervisor or User Instructions, or call 3M OH&ESD Technical Service in the USA
at 1-800-243-4630. In Canada, call 1-800-267-4414.
This product is designed to help protect the wearer‘s eyes and face from harmful
radiation including visible light, ultra-violet radiation (UV), infra-red radiation (IR),
sparks and spatter resulting from welding processes. These products must be used
only by qualified persons who are properly trained in their use and maintenance.
Misuse may result in permanent eye injury and vision loss. Always wear ANSI
Z87.1 compliant safety spectacles in addition to any welding helmet. For proper
use, see supervisor, or User Instructions or call 3M in USA at 1-800-243-4630.
In Canada, call Technical Service at 1-800-267-4414.
Thermal Imaging (see page 11)
Each person using this equipment must read and understand the information in
the User Instructions before use. Use of this equipment by untrained or unqualified
persons, or use that is not in accordance with the User Instructions, may adversely
affect product performance and result in sickness or death. For proper use, see
supervisor or User Instructions, or call 3M in USA at 1-800-243-4630. In Canada,
call Technical Service at 1-800-267-4414.
Hearing Protection Products* (see pages 31-34)
These hearing protectors help reduce exposure to hazardous noise and other loud
sounds. Misuse or failure to wear hearing protectors at all times that you
are exposed to noise may result in hearing loss or injury. For proper use, see
supervisor, User Instructions, or call 3M in USA at 1-800-243-4630. In Canada,
call Technical Service at 1-800-267-4414. If there is any drainage from your ear
or you have an ear infection, consult with your physician before wearing earplugs.
Failure to do so may result in hearing loss or injury.
NRR footnote
*Research suggests that many users will receive less noise reduction than indicated by the NRR due to
variation in earplug fit and wearing time. It is recommended that the NRR be reduced by 50% for estimating
the average amount of noise reduction provided.
3m.com/OccSafety/WorkerSafety
Before each use of the product, please inspect for any rips, damages, tears, etc.
Sorbent Products (see page 54)
Failure to properly handle and dispose of sorbents contaminated by hazardous
materials can result in serious physical injury or death and/or environmental
harm. For proper handling, consult the Material Safety Data Sheet for the material
absorbed, applicable safety and health standards, contact your supervisor, or call
3M OH&ESD Technical Service in the USA at 1-800-243-4630. In Canada, call
1-800-267-4414.
Visit our website to find more information on:
• Training and Tools
• Tech Bulletins
• MSDS
• What’s New
• Where to Buy
• Subscribe to our safety newsletter and much more!
3M.com/OccSafety/WorkerSafety
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved.
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
60
3M.com/OccSafety/WorkerSafety
Visit our website to find more information on:
Training and Tools • Tech Bulletins • Where to Buy • MSDS • What’s New • Subscribe to our safety newsletter and much more!
Products
Training
Services
For More Information
In U.S.
Technical Assistance 1-800-243-4630
Hours of Operation: 8:00 a.m. - 4:30 p.m. CST
In Canada
Technical Assistance 1-800-267-4414
Customer Care
1-800-364-3577
Customer Care Center 1-800-328-1667
Hours of Operation: 7:00 a.m. - 5:00 p.m. CST
Internet
3M.CA/Safety
Internet
3M.com/OccSafety/WorkerSafety
*3M Respirators and Hearing Protection Products – Exclusive NASCAR Officially Licensed Products.
**Greg Biffle name and/or likeness used by authority of Roush Racing, Livonia, Michigan.
3
General Offices
3M Center
St. Paul, MN 55144-1000
Please recycle. Printed in U.S.A.
© 3M 2009. All rights reserved.
70-0710-4248-8 Rev C
3M and all other trademarks not listed are trademarks of 3M Company. Duralcan is a registered
trademark of Alcan Inc. Cordura is a registered trademark of Invista North America S.A.R.L. Tychem is a
registered trademark of E.I. du Pont de Nemours and Company. NASCAR is a registered trademark of the
National Association for Stock Car Auto Racing, Inc. NyCoil is a trademark of NyCoil Company. ORANGE
COUNTY CHOPPERS, O.C.C., and the O.C.C. LOGO and related indicia are trademarks of Orange County
Design Properties, L.L.C., used under license. Peltor is a trademark of 3M Svenska and is used under
license. Realtree Hardwoods HD © 2001 of Jordan Outdoor Enterprises, Ltd., all rights reserved.