Acer 710 Series Laptop User`s guide

700-e.book : 700-eCOP.fm Page i Tuesday, July 28, 1998 10:24 AM

700-e.book : 700-eCOP.fm Page ii Tuesday, July 28, 1998 10:24 AM

Copyright © 1998 Acer Incorporated

All Rights Reserved — Printed in Taiwan

Extensa 700/710 Series Notebook Computer User’s Guide

Part No.: 49.47A01.001

Original Issue: April 1998

First Revision: May 1998

Second Revision: July 1998

Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the serial number, purchase date, and model number in the space provided below. The serial number and model number are recorded on the label affixed to the case. All correspondence concerning your unit should include the serial number, model number, and date of purchase.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.

Extensa Notebook Computer

Model___________Serial No.____________Purchase Date_______________

Extensa is a trademark and a product of Acer Inc., developed with Texas

Instruments Inc. All other trademarks and registered trademarks are the property of their respective companies. Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation.

700-e.book : 700-eTOC.fm Page iii Tuesday, July 28, 1998 10:24 AM

Table of Contents

Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Connecting the Computer . . . . . . . . . . . . . . . . . . . . xiv

Getting Help Online . . . . . . . . . . . . . . . . . . . . . . . . xvii

Support Information . . . . . . . . . . . . . . . . . . . . . . . xviii

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . xix

Chapter 1 Getting Familiar with your Computer . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Securing your Computer. . . . . . . . . . . . . . . . . . . . . .29

Chapter 2 Operating on Battery Power . . . . . . . . . . . . . 31

Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Heuristic Power Management . . . . . . . . . . . . . . . . . .39

Chapter 3 Peripherals and Options . . . . . . . . . . . . . . . . 45

External Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . .46

External Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . .47

External Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

External Pointing Device . . . . . . . . . . . . . . . . . . . . . .49

Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Audio Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Mini Docking Station . . . . . . . . . . . . . . . . . . . . . . . .53

PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Miscellaneous Options . . . . . . . . . . . . . . . . . . . . . . .56

Key Component Upgrades . . . . . . . . . . . . . . . . . . . . .58

Chapter 4 Moving with your Computer . . . . . . . . . . . . . 63

Disconnecting from the Desktop . . . . . . . . . . . . . . . .64

Moving Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Taking the Computer Home . . . . . . . . . . . . . . . . . . .66

Traveling with the Computer. . . . . . . . . . . . . . . . . . .68

iii

700-e.book : 700-eTOC.fm Page iv Tuesday, July 28, 1998 10:24 AM

Table of Contents

Traveling Internationally with the Computer . . . . . . 69

Chapter 5 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

PhDISK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Notebook Manager . . . . . . . . . . . . . . . . . . . . . . . . . 74

Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Chapter 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 97

Frequently-Asked Questions . . . . . . . . . . . . . . . . . . 98

Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Appendix A Specifications. . . . . . . . . . . . . . . . . . . . . . . 107

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 iv

700-e.book : 700-eNOT.fm Page v Tuesday, July 28, 1998 10:24 AM

Notices

FCC Notice

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna

2. Increase the separation between the device and receiver

3. Connect the device into an outlet on a circuit different from that to which the receiver is connected

4. Consult the dealer or an experienced radio/television technician for help

Notice: Shield Cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral Devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

v

700-e.book : 700-eNOT.fm Page vi Tuesday, July 28, 1998 10:24 AM

Notices

Caution

Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer.

Use Conditions

This part complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian Users

This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numérique de la classe B respected toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

vi

700-e.book : 700-eNOT.fm Page vii Tuesday, July 28, 1998 10:24 AM

Notices

Important Safety Instructions

1. Read these instructions carefully. Save these instructions for future reference.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

7. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.

9. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

vii

700-e.book : 700-eNOT.fm Page viii Tuesday, July 28, 1998 10:24 AM

Notices

10.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

11.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

12.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed

b. If liquid has been spilled into the product

c. If the product has been exposed to rain or water

d. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

e. If the product has been dropped or the cabinet has been damaged

f. If the product exhibits a distinct change in performance, indicating a need for service.

13.Replace the battery with the same type as the product's battery we recommend. Use of another battery may present a risk of fire or explosion. Refer battery replacement to a qualified serviceman.

14.Warning! Batteries may explode if not handled properly.

Do not disassemble or dispose of them in fire. Keep them away from children and dispose of used batteries promptly.

viii

700-e.book : 700-eNOT.fm Page ix Tuesday, July 28, 1998 10:24 AM

Notices

15.Use only the proper type of power supply cord set

(provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).

ix

700-e.book : 700-eNOT.fm Page x Tuesday, July 28, 1998 10:24 AM

Notices

Laser Compliance Statement

The CD-ROM drive in this computer is a laser product. The

CD-ROM drive’s classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT

LASERATTENTION: RADIATION DU FAISCEAU LASER

INVISIBLE EN CAS D’OUVERTURE. EVITTER TOUTE

EXPOSITION AUX RAYONS.

LUOKAN 1 LASERLAITE LASER KLASSE 1

VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN

ABDECKUNG GEÖFFNET NICHT DEM STRAHLL

AUSSETZEN

PRODUCTO LÁSER DE LA CLASE I

ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER

ABIERTO. EVITE EXPONERSE A LOS RAYOS.

ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I

STRÅLEN.

VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.

VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR

ÖPPNAD ÅLÅ TUIJOTA SÅTEESEENSTIRRA EJ IN I

STRÅLEN

VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR

ÖPPNADSTIRRA EJ IN I STRÅLEN

ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR

IKKE INN I STRÅLEN

x

700-e.book : 700-eNOT.fm Page xi Tuesday, July 28, 1998 10:24 AM

Notices

Lithium Battery Statement

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

ADVARSEL!

Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.

Udskiftning må kun ske med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til leverandøren.

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner.

VARNING

Explosionsfara vid felaktigt batteribyte. Anvãnd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvãnt batteri enligt fabrikantens instruktion.

VAROITUS

Päristo voi räjähtää, jos se on virheellisesti asennettu.

Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

VORSICHT!

Explosionsgefahr bei unsachgemäßen Austausch der

Batterie Ersatz nur durch denselben oder einem vom

Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.

xi

700-e.book : 700-eNOT.fm Page xii Tuesday, July 28, 1998 10:24 AM

Notices

Year 2000 Compliance Statement

The Extensa 700 series notebook computer is Year 2000compliant and carries the “NSTL Hardware Tested Year

2000 Compliant” logo. This model has been tested both by

Acer’s internal test labs and NSTL using NSTL’s

YMARK2000 certification test. These tests certify that this model will successfully make the year 2000 transition.

For more details, check the Acer Year 2000 Resource Center at http://www.acer.com/year2000

xii

700-e.book : 700-ePRE.fm Page xiii Tuesday, July 28, 1998 10:24 AM

Preface

This manual describes features of the Extensa 700/710

Series notebook computers. The Extensa series computers incorporate such features as CardBus, PCI-based 16-bit stereo audio, Fast Infrared, internal pointing device,

Universal Serial Bus, and all-in-one media storage.

This manual should answer most of the questions you have about the day-to-day operation of your Extensa notebook computer.

Use the Just for Starters… instructions that came with your computer to get your computer running for the first time.

You should also take advantage of the online help files that are available with almost all of the programs shipped with your computer.

We hope you enjoy your Extensa computer. With proper care, your computer will provide you with years of productive service.

xiii

700-e.book : 700-ePRE.fm Page xiv Tuesday, July 28, 1998 10:24 AM

Preface

Connecting the Computer

Connecting the computer is as easy as 1-2-3.

1. Slide out the battery compartment cover and insert the battery pack into the battery compartment. Then slide the battery compartment cover in place.

xiv

Note: When using a battery pack for the first time, fully recharge the battery, then disconnect the adapter to use up the battery before recharging again. You only need to do this once with a new battery.

The battery pack has a pull loop at the end for easy removal.

2. Connect one end of the AC adapter to the DC-in port on the computer’s rear panel and the other end to a properly grounded power outlet.

700-e.book : 700-ePRE.fm Page xv Tuesday, July 28, 1998 10:24 AM

Preface

3. Slide the display cover latch to the left to open the display. Slide the power switch towards the rear of the computer then release it to turn on the power. The

POST (Power On Self-Test) routine executes and

Windows begins loading.

xv

700-e.book : 700-ePRE.fm Page xvi Tuesday, July 28, 1998 10:24 AM

Preface

Note: To turn off the power, press the power switch for more than four seconds. If you are using Windows 98 or

Windows 95 operating system, we recommend that you use the Shutdown command to turn off the computer. If you turn off the computer and want to turn it on again, wait at least two seconds before powering up.

xvi

700-e.book : 700-ePRE.fm Page xvii Tuesday, July 28, 1998 10:24 AM

Preface

Getting Help Online

This user’s guide provides clear and concise information about the computer, so read it thoroughly. To provide you with help when traveling, the computer also has a comprehensive online help.

Accessing Online Help

Follow these steps to access the online documentation:

1. Press the Windows logo button or Click on the Start button.

2. Select Programs.

3. Click on Extensa Online.

The online help is easy to navigate with hypertext and hypergraphics. Clear illustrations help describe notebook operation as well.

Getting Online

If you are connected to the Internet and have World Wide

Web access, visit our home page (http://www.acer.com/) and get the latest information about our products.

xvii

700-e.book : 700-ePRE.fm Page xviii Tuesday, July 28, 1998 10:24 AM

Preface

Support Information

Your computer is backed by an International Traveler’s

Warranty (ITW) that gives you security and peace of mind when traveling. Our worldwide network of service centers are there to give you a helping hand.

An ITW passport comes with your computer. This passport contains all you need to know about the ITW program. A list of available, authorized service centers are in this handy booklet. Read this passport thoroughly.

Note: Always have your ITW passport on hand, especially when you travel to receive the benefits from our support centers. Place your proof-of-purchase in the flap located inside the front cover of the ITW passport.

If the country you are traveling in does not have an Acerauthorized ITW service site, you can still get in contact with our offices worldwide.

For technical assistance and support in the United States and Canada, you can call 1-800-816-2237. You can also contact a local dealer or distributor in the country you are traveling in for assistance.

To view support information, follow these steps:

1. Click on Start, Settings…, Control Panel.

2. Double-click on System.

3. Click on Support Information.

Note: If you are connected to the Internet and have World

Wide Web access, visit our home page (http:// www.acer.com/) and get an updated list of our worldwide offices, as well as information about our products.

xviii

700-e.book : 700-ePRE.fm Page xix Tuesday, July 28, 1998 10:24 AM

Preface

Care and Maintenance

Taking Care of Your Computer

Your computer will serve you well if you take care of it.

❑ Do not expose the computer to direct sunlight. Do not place near sources of heat, such as a radiator.

❑ Do not expose the computer to temperatures below 0ºC

(32ºF) or above 50ºC (122ºF).

❑

Do not subject the computer to magnetic fields.

❑

Do not expose the computer to rain or moisture.

❑

Do not spill water or any liquid on the computer.

❑ Do not subject the computer to heavy shock and vibration.

❑

Do not expose the computer to dust and dirt.

❑

Never place objects on top of the computer to avoid damaging the computer.

❑ Never place the computer on uneven surfaces.

Taking Care of your AC Adapter

Here are some ways to take care of your AC adapter:

❑

Do not connect the adapter to any other device.

❑ Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cables away from personal traffic.

❑ When unplugging the power cord, do not pull on the cord itself but pull on the plug.

xix

700-e.book : 700-ePRE.fm Page xx Tuesday, July 28, 1998 10:24 AM

Preface

❑ The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.

Taking Care of your Battery Pack

Here are some ways to take care of your battery pack:

❑

Use only batteries of the same kind as replacements.

Turn the power off before removing or replacing batteries.

❑

Do not tamper with batteries. Keep them away from children.

❑ Dispose of used batteries according to local regulations. Recycle if at all possible.

Cleaning and Servicing

When cleaning the computer, follow these steps:

1. Power off the computer and remove the battery pack.

2. Disconnect the AC adapter.

3. Use a soft cloth moistened with water. Do not use liquid or aerosol cleaners.

Contact your dealer or see your service technician if any of the following occurs:

❑

The computer has been dropped or the body has been damaged.

❑ Liquid has been spilled into the product.

❑ The computer does not operate normally.

xx

700-e.book : 700-1e.fm Page 1 Tuesday, July 28, 1998 10:24 AM

1

Getting Familiar with your Computer

This computer combines high-performance, versatility, power management features and multimedia capabilities with a unique style and ergonomic design. Work with unmatched productivity and reliability with your new power computing partner.

This chapter gives an in-depth "tour" of the computer’s many features.

Contents

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Special Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Lock Keys . . . . . . . . . . . . . . . . . . . . . . . . . 9

Embedded Numeric Keypad . . . . . . . . . . . 10

Windows 98/Windows 95 Keys . . . . . . . . 11

Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . 12

Keyboard Ergonomics . . . . . . . . . . . . . . . . . . . 15

Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Touchpad Basics. . . . . . . . . . . . . . . . . . . . . . . 16

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Hard Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Floppy Drive . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Media Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Left Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Fast Infrared . . . . . . . . . . . . . . . . . . . . . . 22

Rear Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Universal Serial Bus . . . . . . . . . . . . . . . . 22

Right Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Fax/Data Modem. . . . . . . . . . . . . . . . . . . 24

PC Card Slots . . . . . . . . . . . . . . . . . . . . . 25

Bottom Port. . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

1


Securing your Computer . . . . . . . . . . . . . . . . . . . . . 29

Security Notch . . . . . . . . . . . . . . . . . . . . . . . . . 29

Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2 User’s Guide


Features

Features

This computer was designed with the user in mind. Here are just a few of its many features:

Performance

❑

Intel Pentium® II processor or Intel Pentium® processor with MMX™ technology

❑ 64-bit main memory and external (L2) cache memory

❑

Large LCD display and PCI local bus video with 128-bit graphics acceleration

❑ Internal removable CD-ROM drive (media bay)

❑ Internal 3.5-inch floppy drive

❑

High-capacity, Enhanced-IDE removable hard disk

❑

Lithium-Ion battery pack

❑ Heuristic power management system with standby and hibernation power saving modes

Multimedia

❑ PCI-based 16-bit high-fidelity stereo audio with

3-D sound and wavetable synthesizer

❑

Built-in dual speakers

❑

S-video output

❑ Ultra-slim, high-speed CD-ROM drive

Connectivity

❑ High-speed fax/data modem port

❑ Fast infrared wireless communication

❑ USB (Universal Serial Bus) port

Chapter 1 Getting Familiar with your Computer 3


Features

Human-centric Design and Ergonomics

❑

Lightweight and slim

❑ Sleek, smooth and stylish design

❑ Full-sized keyboard

❑ Wide and curved palm rest

❑

Ergonomically-centered touchpad pointing device

Expansion

❑

CardBus PC card (formerly PCMCIA) slots (two type II/I or one type III) with ZV (Zoomed Video) port support

❑ Mini docking station option for one-step connect/ disconnect from peripherals

❑

Upgradeable memory and hard disk



Display

Display

The large graphics display offers excellent viewing, display quality and desktop performance graphics. The computer supports two different display configurations — Super Clear

Color (SCC) or Thin-Film Transistor (TFT).

Video Performance

PCI local bus video with 128-bit graphics acceleration and

2MB Extended Data Out (EDO) video RAM boost video performance.

Simultaneous Display

The computer’s large display and multimedia capabilities are great for giving presentations. If you prefer, you can also connect an external monitor when giving presentations. This computer supports simultaneous LCD and CRT display. Simultaneous display allows you to control the presentation from your computer and at the same time face your audience. With the built-in S-video output jack, you can even connect other output display devices such as LCD projection panels for large-audience presentations.

Power Management

The power management system incorporates an "automatic

LCD dim" feature that automatically decides the best settings for your display and at the same time conserves

power. See “Heuristic Power Management” on page 39 for

more information on power management features.



Display

Opening and Closing the Display

To open the display, slide the display cover latch to the left and lift up the cover. Then tilt it to a comfortable viewing position. The computer employs a microswitch that turns off the display (and enters standby mode) to conserve power when you close the display cover, and turns it back on when you open the display cover.

Note: If an external monitor is connected, the computer turns off the display (but does not enter standby mode) when you close the display cover.

To close the display cover, fold it down gently until the display cover latch clicks into place.

Caution: To avoid damaging the display, do not slam it when you close it. Also, do not place any object on top of the computer when the display is closed.



Indicators

Indicators

The computer has six easy-to-read status indicators (LEDs) under the display screen.

The Power and Standby indicators are visible even when you close the display cover so you can see the status of the computer while the cover is closed.

Icon Function Description

Power Lights when the computer is on.

Standby Lights when the computer enters

Standby mode.

Media Activity Lights when the floppy drive, hard disk or CD-ROM drive (or other media bay module) is active.

Battery Charge Lights when the battery is being charged.



Indicators

Icon Function

Caps Lock

Num Lock

Description

Lights when Caps Lock is activated

Lights when Numeric Lock is activated



Keyboard

Keyboard

The keyboard has full-sized keys and an embedded keypad, separate cursor keys, two Windows 98/Windows 95 keys and twelve function keys.

Special Keys

Lock Keys

The keyboard has three lock keys which you can toggle on and off.

Lock Key Description

Caps Lock When Caps Lock is on, all alphabetic characters typed are in uppercase.

Num Lock

(Fn-F11)

Scroll Lock

(Fn-F12)

When Num Lock is on, the embedded keypad is in numeric mode. The keys function as a calculator

(complete with the arithmetic operators +, -, *, and /). Use this mode when you need to do a lot of numeric data entry. A better solution would be to connect an external keypad.

When Scroll Lock is on, the screen moves one line up or down when you press

↑

or

↓

respectively.

Scroll Lock does not work with some applications.



Keyboard

Embedded Numeric Keypad

10

The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols are not printed on the keys.

Desired Access Num Lock On Num Lock Off

Number keys on embedded keypad

Cursor-control keys on embedded keypad

Main keyboard keys

Type numbers in a normal manner.

Hold Shift while using cursor-control keys.

Hold Fn while typing letters on embedded keypad.

Hold Fn while using cursorcontrol keys.

Type the letters in a normal manner.

Note: If an external keyboard or keypad is connected to the computer, the numlock feature automatically shifts from the internal keyboard to the external keyboard or keypad.

User’s Guide


Keyboard

Windows 98/Windows 95 Keys

The keyboard has two keys that perform Windows 98-/

Windows 95-specific functions.

Key Description

Windows logo key Start button. Combinations with this key performs special functions. Below are a few examples:

á + Tab (Activate next Taskbar button)

á + E (Explore My Computer)

á + F (Find Document)

á + M (Minimize All)

Shift + á + M (Undo Minimize All)

á + R (Display Run dialog box)

Application key Opens the application’s context menu

(same as right-click).



Keyboard

Hot Keys

The computer employs hot keys or key combinations to access most of the computer’s controls like screen contrast and brightness, volume output and the BIOS setup utility.

Hot Key Icon Function Description

Fn-F1 Hot key help Displays a list of the hotkeys and their functions.

Fn-F2

Fn-F3

Setup

Standby

Accesses the notebook

configuration utility. See

“Notebook Manager” on page 74.

Puts the computer in

Standby mode. Press any key to return.

See “Standby Mode” on page 40 to learn more

about Standby mode.



Keyboard

Hot Key

Fn-F4

Icon

Fn-F5

Fn-F6

Fn-F7

Function Description

Hibernation Puts the computer in

Hibernation mode (if

PHDISK, the hibernation utility, is installed, valid and enabled). Press the power switch to resume.

Otherwise, the computer

enters Standby mode. See

“Hibernation Mode” on page 42 for more about

Hibernation mode.

Display toggle

Switches display output between the display screen, external monitor (if connected) and both the display screen and external monitor.

Screen blank Turns the display screen backlight off to save power. Press any key to return.

Touchpad on/off

Turns the internal touchpad on and off.

Fn-F8 Speaker on/ off

Turns the speakers on and off; mutes the sound.

Fn-

↑

Fn-

↓

Contrast up

Contrast down

Increases the screen contrast (available only for models with SCC displays).

Decreases the screen contrast (available only for models with SCC displays).



Keyboard

Hot Key

Fn-

→

Icon Function Description

Brightness up Increases the screen brightness.

Fn← Brightness down

Decreases the screen brightness.

Fn-H Turbo mode on/off

Toggles turbo mode on and off. With turbo mode off, power management is maximized.

Note: If you want to use an external PS/2 mouse, first enable the touchpad, connect the external PS/2 mouse, then disable the touchpad if necessary.

Activating Hot Keys

When activating hot keys, press and hold the first key Fn before pressing the other key in the hot key combination.



Keyboard

Keyboard Ergonomics

Located below the keyboard, the wide and curved palm rest is ergonomically designed to provide you with a very comfortable place to rest your hands while you type.



Touchpad

Touchpad

The built-in touchpad is a PS/2-compatible pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. The central location on the palm rest provides optimum comfort and support.

Note: When using an external mouse, you can press Fn-

F7 to disable the internal touchpad. If you want to use an external PS/2 mouse, first enable the touchpad, connect the external PS/2 mouse, then disable the touchpad if necessary.

Touchpad Basics

The following items teach you how to use the touchpad:

❑ Move your finger across the touchpad to move the cursor.

❑

Press the left and right buttons located on the edge of the touchpad to do selection and execution functions.

These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchpad produces similar results.



Touchpad

Function

Execution

Left Button

Right

Button

Click twice quickly

Selection

Drag

Click once

Click and hold, then use finger to drag the cursor on the touchpad

Access context menu

Click once

Tap

Tap twice (at the same speed as doubleclicking the mouse button)

Tap once

Tap twice (at the same speed as doubleclicking the mouse button) and hold finger to the touchpad on the second tap to drag the cursor

Note: Keep your fingers dry and clean when using the touchpad. Also keep the touchpad dry and clean. The touchpad is sensitive to finger movements. Hence, the lighter the touch, the better the response. Tapping too hard will not increase the touchpad’s responsiveness.



Storage

Storage

This computer supplies you with all-in-one media storage:

❑

High-capacity Enhanced-IDE hard disk

❑ Standard ultra-slim internal 3.5-inch floppy drive

❑ High-speed CD-ROM drive (swaps with other highcapacity media modules)

Hard Disk

The removable hard disk module can be upgraded when

you need more storage space. See “Hard Disk Upgrade” on page 61.

Floppy Drive

The ultra-slim internal floppy drive reads and writes on standard 3.5-inch diskettes.

Ejecting a Floppy Disk

Press the floppy disk eject button to eject a floppy disk from the floppy drive.

Media Bay

A high-speed CD-ROM drive module sits in the media bay on the right side of the computer. The CD-ROM drive gives you portable multimedia access.



Storage

Ejecting the CD-ROM Tray

To eject the CD-ROM drive tray when the computer is turned on, press the CD-ROM eject button.

Note: When power is off, you can eject the CD-ROM drive

tray using the emergency eject hole. See page 100.

Swapping Modules

The flexible media bay allows you to swap the standard CD-

ROM drive with other high-capacity media modules such as a DVD-ROM drive, an LS-120 drive or a second hard disk.

Follow these steps:

1. Shutdown the computer.

2. Locate the media bay release latch; then slide the latch towards the media bay and hold.

3. Grasp the media bay release grip area and pull the module out of the media bay; then release the media bay release latch.



Storage

4. Insert a module into the media bay until it clicks in place.



Ports

Ports

Ports allow you to connect peripheral devices to your computer as you would with a desktop PC.

Note: See Chapter 3 on how to connect external devices to the computer.

Left Ports

Icon Port

S-video jack

Connects to...

Television with S-video input jack

Infrared port Infrared device (e.g., infrared printer, IR-aware computers)

USB port USB device (e.g., USB mouse)



Ports

S-Video

You can connect a television set with a s-video input jack to the computer, useful for large audience presentations and entertainment.

Fast Infrared

The computer’s fast infrared (FIR) port allows you to do wireless data transfer with other IR-aware computers and peripherals such as infrared printers. The infrared port can transfer data at speeds of up to four megabits per second

(Mbps) at a distance of up to one meter.

To use FIR, position two IR-aware devices such that their IR ports are no more than one meter apart and offset no more than 15 degrees.

When the two computers are in position, simply begin the data transfer as you normally would. See your file transfer software for details.

Universal Serial Bus

The Universal Serial Bus (USB) port is a high-speed serial bus which allows you to connect and daisy-chain USB peripherals without taking up precious system resources.



Ports

Rear Ports

Icon Port

Speaker-out jack

Connects to...

Speakers or headphones

Line-in/

Microphonein jack

Serial port

Audio line-in device with a 3.5mm minijack (e.g., condenser microphone, audio CD player, stereo walkman).

Serial device (e.g., serial mouse)

Modem jack Phone line

Parallel port Parallel device (e.g., parallel printer)

External monitor port

Display monitor (up to 1024x768 resolution, 64K-colors)



Ports

Icon Port

DC-in jack

Connects to...

AC adapter and power outlet

Fax/Data Modem

The computer has a built-in fax/data modem.

Caution: This modem port is not compatible with digital phone lines. Plugging this modem into a digital phone line will damage the modem.

To use the fax/data modem port, connect a phone cable from the modem port to a telephone jack.

Start your communications software program. See your communications manual for instructions.



Ports

Right Ports

Icon Port Connects to...

PC Card slots 16-bit PC Cards and 32-bit

CardBus PC Cards (ZV- support)

PS/2 port PS/2-compatible device (e.g., PS/

2 keyboard/mouse/keypad).

PC Card Slots

There are two type II/I or one type III CardBus PC Card slots found on the right panel of the computer. These slots accept credit-card-sized cards that enhance the usability and expandability of the computer.

PC Cards (formerly PCMCIA) are add-on cards for portable computers, giving you expansion possibilities long afforded by desktop PCs. Popular type II cards include flash memory, SRAM, fax/data modem, LAN and SCSI cards.

Common type III cards are 1.8-inch ATA drives and cellular modems. CardBus improves on the 16-bit PC card technology by expanding the bandwidth to 32 bits.

ZV (Zoomed Video) port support allows your computer to support hardware MPEG in the form of a ZV PC card.



Ports

Note: Refer to your card’s manual for details on how to install and use the card and its functions.

Inserting a Card

Insert the card into the desired slot and make the proper connections (e.g., network cable), if necessary. See your card manual for details.

26

For type III cards, insert the card into the lower slot.

Ejecting a Card

Before ejecting a PC card:

❑ Exit the application using the card.

❑

Left-click on the PC card icon on the taskbar and stop the card operation.

User’s Guide


Then press the slot eject button to eject the card.

Ports

Bottom Port

Docking Connector

Icon Port

Mini docking connector

Connects to...

Mini docking station



Audio

Audio

The standard computer configuration includes 16-bit highfidelity stereo audio with further enhancements that include 3D sound for true audio immersion. Dual speakers located on each side of the display hinge direct sound towards to further enhance sound output. A sensitive microphone is located above the display screen.

Microphone

28

Besides the built-in speakers, there are audio ports on the

left panel of the computer. See “Audio Devices” on page 52

for more information on connecting external audio devices.

Controlling Volume

Controlling volume on the computer is easy with a rotary volume control knob on the right panel. Turn the knob to the right to increase the volume; turn it to the left to decrease the volume.

User’s Guide


Securing your Computer


Security features include hardware and software locks — a security notch and a two-level password scheme.

Security Notch

A security notch located on the rear panel of the computer lets you connect a Kensington-compatible key-based computer security lock.

Wrap a computer security lock cable around an immovable object such as a table or locked drawer handle. Insert the lock into the notch and turn the key to secure the lock.

Passwords

A two-level password scheme protects your computer from unauthorized access. When set, no one can access the computer without entering the correct password.

There are two types of passwords you can set:

❑

Supervisor Password secures your computer against unauthorized use and prevents unauthorized access to certain sections of the Setup Utility. Once set, you must key-in this password to set certain parameters in the

Setup Utility. See “Setup Utility” on page 83 for details.

❑ User Password secures your computer against unauthorized use.




Important: Do not forget your password! If you forget your password, you need to contact your dealer.

Note: You must set the supervisor password before you can set the user password.

Setting a Password

You can set the password using:

❑

Notebook Manager -- go to page 78.

❑

Setup Utility -- go to page 92.



2

Operating on Battery Power

The computer operates on AC or battery power. This chapter contains the information you need to know to operate the computer on battery power. It also includes information on how your computer manages and saves power.

Contents

Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Battery Pack Characteristics . . . . . . . . . . . . . . 32

Installing and Removing the Battery Pack . . . . 33

Charging the Battery . . . . . . . . . . . . . . . . . . . . 34

Charging Modes. . . . . . . . . . . . . . . . . . . . 34

Checking the Battery Level . . . . . . . . . . . . . . . 35

Using the Windows Battery Meter . . . . . . 35

Optimizing Battery Life . . . . . . . . . . . . . . . . . . 36

Battery-low Warning . . . . . . . . . . . . . . . . . . . . 37

Heuristic Power Management . . . . . . . . . . . . . . . . . 39

Power Management Modes . . . . . . . . . . . . . . . 40

Display Standby Mode . . . . . . . . . . . . . . . 40

Hard Disk Standby Mode . . . . . . . . . . . . . 40

Peripheral Standby Modes . . . . . . . . . . . . 40

Standby Mode . . . . . . . . . . . . . . . . . . . . . 40

Hibernation Mode . . . . . . . . . . . . . . . . . . 42

Advanced Power Management . . . . . . . . . . . . . 44

31


Battery Pack

Battery Pack

The computer uses a battery pack that gives you long use between charges.

Battery Pack Characteristics

The battery pack has the following characteristics:

❑

Employs Current Battery Technology Standards

The computer uses a Lithium-Ion battery pack which does not have the memory effect problem of Nickel

Cadmium (NiCd) batteries. Li-Ion batteries consistently provide the longest battery life, best-suited for road warriors.

❑

Battery-low Warning

When the battery charge level becomes low, the computer gives off warning beeps and the status indicator flashes at regular intervals. This tells the user that the battery power is critically low. You can correct this situation by recharging the battery pack.

Whenever possible, use the AC adapter. The battery will come in handy when you travel or during a power failure. It is advisable to have an extra fully-charged battery pack available as backup.

Using a Battery Pack for the First Time

When using a battery pack for the first time, follow these steps:

1. Disable the Battery Low Suspend parameter in Setup or uncheck the Enable sleep upon battery low in the Power

Management screen of Notebook Manager. See page 93

and page 80 respectively.

2. Connect the AC adapter to a power source and to the computer and fully recharge the battery



Battery Pack

3. Disconnect the adapter to use up the battery before recharging again.

You only need to do this once with a new battery or with a battery that's been stored without being used for a long time. If the computer is to be stored for more than two weeks, we suggest you remove the battery pack. Battery power from a fully chaged battery pack depletes in roughly a day with the computer in Standby mode, a month in

Hibernation mode or when power is off.

Warning! Do not expose battery packs to temperatures below 0ºC (32ºF) or above 60ºC (140ºF).

This may adversely affect the battery pack.

Installing and Removing the Battery Pack

Important! Before removing the battery pack, make sure that you have an AC adapter connected to the computer; otherwise turn off the computer.

Follow these steps to install the battery pack:

1. Press the battery bay cover release button and slide out the cover as shown in the figures below.

Chapter 2 Operating on Battery Power 33


Battery Pack

2. Insert the battery pack into the battery bay.

3. Replace the battery bay cover.

To remove the battery pack, remove the battery bay cover; then pull out the battery pack using the pull loop.

Charging the Battery

To charge the battery, place the battery pack inside the battery bay and plug the AC adapter into the computer and an electrical outlet.

Charging Modes

The adapter has three charging modes:

❑

Rapid mode

The computer uses rapid charging when power is turned off and a powered AC adapter is connected to it. In rapid mode, a fully depleted battery gets fully charged in approximately two hours.



Battery Pack

❑ Charge-in-use mode

When the computer is in use with the AC adapter plugged in, the computer also charges the battery pack if installed. This mode will take longer to fully charge a battery than rapid mode. In charge-in-use mode, a fully depleted battery gets fully charged in approximately three to four hours.

❑

Trickle mode

When the battery is fully charged, the adapter changes to trickle mode to maintain the battery charge level.

This prevents the battery from draining while the computer is in use.

Note: We suggest that you charge the battery pack before retiring for the day, letting it charge overnight before traveling. This ensures a fully charged battery for use the next day.

Checking the Battery Level

The computer features battery-low warning signals that are both audible and visible. When the battery pack is low, the computer emits warning beeps and the battery indicator flashes at regular intervals. Also, you can check the battery charge level using the Windows battery gauge.

Using the Windows Battery Meter

The Windows battery meter indicates the present battery level. Simply rest your cursor on the battery gauge (or AC plug) icon on the taskbar to see the present charge level of your battery.



Battery Pack

Optimizing Battery Life

This section helps you get the most out of battery operation.

Optimizing battery life prolongs the charge/recharge cycle and improves recharge efficiency. Follow these suggestions to optimize and maximize battery power:

❑

Purchase an extra battery pack.

❑ Use the PhDISK utility to reserve hard disk space for the

Hibernation function. See “PhDISK” on page 73.

❑

Use the AC adapter whenever possible so that the battery is reserved for on-the-go computing.

❑ Keep the battery pack in the computer powered by the

AC adapter. The constant trickle charge maintains the battery level to eliminate the battery self-discharge effect. The charge-in-use function also charges the battery pack.

❑

Disable the parallel and serial ports if no devices are connected to these ports. You can do this through the

Setup Utility. See “Advanced” on page 89.

❑

Eject the PC card from the card slot when not in use, since the PC card draws extra power.

❑ Store the battery pack in a cool, dry place. The recommended storage temperature for battery packs ranges from 10 to 30 degrees C. The higher the storage temperature, the faster the battery pack self-discharges.

❑ The batteries can be recharged about 300 times when used as directed. Excessive recharging decreases battery life.

❑

Take care of your battery pack and AC adapter. See

“Care and Maintenance” on page xix of the preface.



Battery Pack

Battery-low Warning

You never have to worry about battery power as long as you are using the AC adapter. However, when you operate the computer on battery power, pay extra attention to the warning beeps and the power indicator on the display panel.

The following signals indicate a battery-low condition:

❑

The buzzer generates four short beeps every minute, if you enabled the Battery-low Warning Beep parameter in

Setup.

❑

The power indicator flashes at regular intervals until battery power is depleted.

When you receive a battery-low warning, you have around two minutes to save your work. If you do not connect the

AC adapter within this period, the computer enters

Hibernation mode if the Battery Low Suspend parameter in

Setup is enabled and the following conditions exist:

❑ The Hibernation file created by PhDISK is present and

valid. See “PhDISK” on page 73.

❑

There is enough battery power left to save system information onto the hard disk.

Otherwise, the computer enters Standby mode.

Warning: Connect the AC adapter to the computer as soon as possible. Data is lost when computer power is cut off during Standby mode.



Battery Pack

The following table shows the recommended course of action to take when you encounter a battery-low condition.

Situation Recommended Action

AC adapter and power outlet available

An extra fullycharged battery pack available

AC adapter or power outlet not available

1. Connect the AC adapter to the computer.

2. Save all necessary files.

3. Resume work.

Power off the computer if you wish to recharge the battery rapidly.


2. Exit the application.

3. Power off the computer.

4. Replace the battery pack.

5. Power on the computer and resume work.

or


2. Enter Hibernation mode.

3. Install the extra battery pack.

4. Resume from Hibernation mode.


2. Exit the application.

3. Power off the computer.

or


2. Enter Hibernation mode.



Heuristic Power Management


This computer has a built-in heuristic power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, mouse, floppy drive, hard disk, peripherals connected to the serial and parallel ports, and video memory. If no activity is detected for a period of time (called an inactivity time-out), the computer stops some or all of these devices in order to conserve energy.

This computer employs an innovative power management technique called Heuristic Power Management or HPM.

HPM allows the computer to provide maximum power conservation and maximum performance at the same time.

Power management methods used by most computers are timer-based. You set inactivity time-out values for the display, hard disk, and other devices. The computer then

"sleeps" when these time-outs elapse. The problem with this is that no two users are alike. Each of us has his or her own habits when using the computer, which makes timerbased power management ineffective.

With HPM, your computer manages its power according to the way you use your computer. This means the computer delivers maximum power when you need it, and saves power when you don’t need the maximum — all without your intervention. There are no timers to set, because the

HPM system figures out everything for you.

Note: We recommend you enable heuristic power management to prolong your battery life.




Power Management Modes

Display Standby Mode

Screen activity is determined by the keyboard, the built-in touchpad, and an external PS/2 pointing device. If these devices are idle for the period determined by the computer’s

HPM unit, the display shuts off until you press a key or move the touchpad or external mouse.

"Automatic Dim" Feature

The computer has a unique "automatic dim" power-saving feature. When the computer is using AC power and you disconnect the AC adapter from the computer, it automatically dims the LCD backlight to save power. If you reconnect AC power to the computer, it automatically adjusts the LCD backlight to a brighter level.

Hard Disk Standby Mode

The hard disk enters standby mode when there are no disk read/write operations within the period of time determined by the HPM unit. In this state, the power supplied to the hard disk is reduced to a minimum. The hard disk returns to normal once the computer accesses it.

Peripheral Standby Modes

The peripheral connections in your computer also power down to save power if there is no activity within the period of time specified by the computer’s HPM unit for these devices. These include audio, serial ports, floppy drive and parallel port.

Standby Mode

The computer consumes very low power in Standby mode.

Data remain intact in the system memory until the battery is drained.




There is one necessary condition for the computer to enter

Standby mode:

❑ Heuristic Power Management must be set to [ENABLED].

There are four ways to enter Standby mode:

❑ Pressing the Standby hot key Fn-F3

❑ If the waiting time determined by the computer’s HPM unit elapses without any system activity

❑

Closing the display cover

❑ When the computer is about to enter Hibernation mode

(e.g., during a battery low condition), but the

Hibernation file is invalid or not present

Note: If the computer beeps but does not enter Standby mode after pressing the Standby hot key, it means the operating system will not allow the computer to enter the power-saving mode.

The following signals indicate that the computer is in

Standby mode:

❑

The buzzer beeps

❑ The Standby indicator lights

Warning: Unstored data is lost when you turn off the computer power in Standby mode or when the battery is drained.

To leave Standby mode and return to normal mode:

❑ Press any key

❑

Move the active pointing device (internal or external, PS/

2 or serial)

❑ Have the Resume Timer set and let it be matched

❑ Open the display cover




❑ Experience an incoming PC card modem event

Hibernation Mode

In Hibernation mode, all power shuts off (the computer does not consume any power). The computer saves all system information onto the hard disk before it enters Hibernation mode. Once you turn on the power, the computer restores this information and resumes where you left off upon leaving Hibernation mode.

There are two necessary conditions for the computer to enter Hibernation mode:

❑ The Hibernation file created by PhDISK must be present

and valid. See “PhDISK” on page 73.

❑

Heuristic Power Management must be set to [ENABLED].

In this situation, there are four ways to enter Hibernation mode:

❑

Pressing the Hibernation hot key Fn-F4

❑ If the waiting time determined by the computer’s HPM unit elapses without any system activity

❑

If a battery low condition occurs and the Battery Low

Suspend parameter in Setup is set to [ENABLED].

❑ Invoked by the operating system power saving modes

Note: If the computer beeps but does not enter

Hibernation mode after pressing the Hibernation hot key, it means the operating system will not allow the computer to enter the power-saving mode.




To exit Hibernation mode, press the power switch. The computer also resumes from Hibernation mode if the resume timer is set and matched. The computer also resumes via the network if the Wake On LAN parameter is enabled.

Warning: Do not change any devices (such as add memory or swap hard disks) when the computer is in

Hibernation mode.




Advanced Power Management

This computer supports the APM standard designed to further reduce power consumption. APM is a powermanagement approach defined jointly by Microsoft and

Intel. An increasing number of software packages support

APM to take advantage of its power-saving features and allows greater system availability without degrading performance.

For more information about APM under Windows 98 or

Windows 95, refer to your Windows 98 or Windows 95 user’s manual.

Note: If you enable heuristic power management in Setup without APM installed and enabled (true by default), the system time and date do not display the correct settings after the computer returns to normal operation from

Standby or Hibernation mode. To update the time and date, reboot the computer. APM should be enabled to avoid this problem. Advanced Power Management greatly prolongs battery life. Use APM whenever possible.



3

Peripherals and Options

Your computer offers excellent expansion capabilities with its built-in ports and connectors. This chapter describes how to connect peripherals and hardware options that help you use your computer with ease. When connecting peripherals, read the manual included with the peripheral for operating instructions. You can purchase most of these and other options directly from Acer.

This chapter also includes sections on how to upgrade key components. Key component upgradeability helps keep your computer in step with the latest technology.

Contents

External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 46

External Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . 47

External Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

External Pointing Device . . . . . . . . . . . . . . . . . . . . . 49

External PS/2 Mouse . . . . . . . . . . . . . . . . . . . 49

External Serial Mouse . . . . . . . . . . . . . . . . . . . 50

Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Audio Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Mini Docking Station . . . . . . . . . . . . . . . . . . . . . . . 53

PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Miscellaneous Options . . . . . . . . . . . . . . . . . . . . . . 56

Additional Power Packs . . . . . . . . . . . . . . . . . . 56

Battery Pack . . . . . . . . . . . . . . . . . . . . . . 56

AC Adapter . . . . . . . . . . . . . . . . . . . . . . . 56

Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

PS/2 Y-Bridge Cable . . . . . . . . . . . . . . . . 56

File Transfer Cable . . . . . . . . . . . . . . . . . 57

Key Component Upgrades . . . . . . . . . . . . . . . . . . . . 58

Memory Upgrade . . . . . . . . . . . . . . . . . . . . . . . 58

Memory Configurations . . . . . . . . . . . . . . 58

Installing Memory . . . . . . . . . . . . . . . . . . 59

Hard Disk Upgrade . . . . . . . . . . . . . . . . . . . . . 61

Installing a Replacement Hard Disk . . . . . 61

45


External Monitor

External Monitor

To show graphical effects on a larger display, connect an external monitor to the CRT port. Read the monitor manual for additional instructions.

46

Note: If an external monitor is not connected, closing the display cover puts the computer into standby mode.

You can also choose to connect other output display devices to the computer via its S-video output jack. Useful for presentations and entertainment, you can display your computer output to a television monitor or LCD projector.

To enable the display to output to display devices with Svideo, follow these steps:

1. Click on Start, Settings..., then Control Panel.

2. Double-click on Display.

3. Click on the Neomagic tab.

4. Click on Display Options and select TV.

5. Click on OK and exit.

User’s Guide


External Keyboard

External Keyboard

This computer has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible external keyboard.

To connect an external keyboard, plug the external keyboard into the PS/2 connector.

Chapter 3 Peripherals and Options 47


External Keypad

External Keypad

You can also use a 17-key numeric keypad for numbersensitive data entry applications. To connect the keypad, plug the keypad connector into the PS/2 port.



External Pointing Device


This computer accepts either a PS/2-compatible or serial mouse or similar pointing device.

Note: When using an external mouse, you may choose to disable the internal touchpad by pressing Fn-F7.

External PS/2 Mouse

The built-in touchpad works alternately with an external

PS/2 mouse which is hot-pluggable. To use a PS/2compatible mouse, simply plug it into the PS/2 port.

Note: Enable the touchpad before connecting the PS/2 mouse.




External Serial Mouse

If you use a serial mouse, plug it into the serial port.

To enable the serial mouse, use the Add New Hardware tool in the Windows 98/Windows 95 Control Panel.



Printer

Printer

This computer supports both serial and parallel printers.

For a serial printer, plug the printer cable into a serial port.

For a parallel printer, plug the printer cable into the parallel port. See your printer manual for operating instructions.

Note: If the printer does not function, enter Setup and

verify that the parallel port is enabled. See “Advanced” on page 89 for assistance.



Audio Devices

Audio Devices

Audio devices are easy to connect with the audio ports accessible from the left rear side of the computer. You can plug in an external microphone or audio line-in device to the line-in/microphone-in jack. Amplified speakers or headphones connect to the speaker/headphone-out jack.

52

Setting the Input Source

To use an external audio line-in device, you need to set the appropriate input source. Follow these steps:

1. Click on Start, Programs, then Notebook Manager.

2. Click on the Line-in/Microphone tab.

3. Click on the radio button of the desired input source.

4. Click on Apply and exit.

User’s Guide


Mini Docking Station

Mini Docking Station

For one-step connection and disconnection from your peripherals, use the optional full-featured port replicator.

This port replicator includes all the ports on your computer and adds a few more.

It also has a unique dock bay which accepts a CardBus module for additional CardBus slots, an Ethernet module for connecting to Ethernet-based networks, and a FireWire

1394 high-speed serial bus module.

Refer to the easy-to-use quick reference and installation guide that comes with the mini docking station option.



PC Cards

PC Cards

The computer has two CardBus PC card slots that accommodate two type I/II or one type III PC card(s). Please consult your dealer for PC card options available that you can purchase for your computer.



USB Devices

USB Devices

The computer has a USB (Universal Serial Bus) port that allows you to connect peripherals without occupying too many resources. Common USB devices include the mouse and keyboard.

Most USB devices also include a built-in USB port connector which allows you to daisy-chain other USB devices.



Miscellaneous Options


Additional Power Packs

You can order spare batteries and an AC adapter.

Battery Pack

It is good practice to have a spare battery around, especially when you travel. The Lithium-Ion battery, coupled with heuristic power management features, supplies you with more power on-the-go.

AC Adapter

The compact AC adapter charges your battery pack and supplies power to your computer. You can order a spare AC adapter so you do not need to carry it from the office to your home or destination.

Cables

PS/2 Y-Bridge Cable

The PS/2 Y-bridge cable allows you to connect two PS/2 devices, mouse and keyboard, to your computer simultaneously.

Note: The keyboard must be connected to the connector marked keyboard and the mouse must be connected to the connector marked mouse.




Connect the single connector end of the Y-bridge cable to the computer’s PS/2 port and the double connector ends to the two PS/2 devices.

File Transfer Cable

Besides using the infrared port, you can also transfer files between computers using a file transfer cable. Connect the file transfer cable between the parallel ports of the two computers and use your file transfer utility to perform the transfer.



Key Component Upgrades


Your computer delivers superior power and performance.

However, some users and the applications they use may demand more. This computer allows you to upgrade key components when you need increased performance.

Note: Contact your authorized dealer if you decide to perform a key component upgrade.

Memory Upgrade

Memory is upgradeable from 16 to 128 MB, employing 16-/

32-/64-MB 64-bit soDIMMs (Small Outline Dual Inline

Memory Modules).

Memory Configurations

The following table lists the possible memory configurations:

Important! DIMMs in both slots should be of the same type. Do not mix different DIMM types, EDO and SDRAM, together.

Slot 1

0 MB

0 MB

0 MB

16 MB

16 MB

16 MB

Slot 2

16 MB

32 MB

64 MB

0 MB

16 MB

32 MB

Total Memory

16 MB

32 MB

64 MB

16 MB

32 MB

48 MB




Slot 1

16 MB

32 MB

32 MB

32 MB

32 MB

64 MB

64 MB

64 MB

64 MB

Slot 2

64 MB

0 MB

16 MB

32 MB

64 MB

0 MB

16 MB

32 MB

64 MB

Total Memory

80 MB

32 MB

48 MB

64 MB

96 MB

64 MB

80 MB

96 MB

128 MB

Installing Memory

Follow these steps to install memory:

1. Turn off the computer, unplug the AC adapter (if connected) and remove the battery pack. Then turn the computer over to access its base.

2. Remove the screw from the memory door; then lift up and remove the memory door.




3. Insert the memory module diagonally into the slot, then gently press down until it clicks into place.

4. Replace the memory door and secure it with the screw.

60

The computer automatically detects and reconfigures the total memory size.

User’s Guide



Hard Disk Upgrade

You can upgrade your hard disk with a higher capacity drive when you need more storage space. The computer uses a 12.7mm or 9.5mm 2.5-inch Enhanced-IDE hard disk.

Installing a Replacement Hard Disk

Follow these steps to install a hard disk:

1. Turn off the computer, unplug the AC adapter (if connected) and remove the battery pack. Turn the computer around to access its rear.

2. Locate the hard disk bay. Using a coin, loosen the coinscrew by turning it counterclockwise.




3. Pull out the hard disk.

4. Insert a new hard disk module into the hard disk bay and tighten the coin-screw by turning it clockwise.



4

Moving with your Computer

This chapter gives you tips and hints on things to consider when moving around or traveling with your computer.

Contents

Disconnecting from the Desktop . . . . . . . . . . . . . . . 64

Moving Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Preparing the Computer . . . . . . . . . . . . . . . . . 65

What To Bring to Short Meetings. . . . . . . . . . . 65

What To Bring to Long Meetings . . . . . . . . . . . 65

Taking the Computer Home . . . . . . . . . . . . . . . . . . 66


What To Bring with You . . . . . . . . . . . . . . . . . 66

Special Considerations . . . . . . . . . . . . . . . . . . 66

Setting Up a Home Office . . . . . . . . . . . . . . . . 67

Traveling with the Computer. . . . . . . . . . . . . . . . . . 68




Traveling Internationally with the Computer . . . . . . 69




63


Disconnecting from the Desktop

Disconnecting from the Desktop

Follow these steps to disconnect your computer from external accessories:

1. Save your work in progress.

2. Shut down the operating system.

3. Turn off the computer.

4. Disconnect the cord from the AC adapter.

5. Disconnect the keyboard, pointing device, printer, external monitor, and other external devices.

If your external devices are connected to the optional mini docking station, disconnect the notebook from the mini docking station. You do not need to disconnect the external devices from the mini docking station.

6. Disconnect the Kensington lock if you are using one to secure the computer.



Moving Around

Moving Around when you are just moving within short distances, for example, from your office desk to a meeting room

Preparing the Computer

Before moving the computer, close and latch the display cover to place it in standby mode. You can now safely take the computer anywhere you go within the building.

To bring the computer out of standby mode, open the display.

What To Bring to Short Meetings

A fully charged battery runs the computer for 2-3 hours under most circumstances. If your meeting is shorter than that, you probably do not need to bring anything with you other than the computer.

What To Bring to Long Meetings

If your meeting will last longer than 3 hours or if your battery is not fully charged, you may want to bring the AC adapter with you to plug in your computer in the meeting room.

If the meeting room does not have an electrical outlet, reduce the drain on the battery by putting the computer in standby mode. Press Fn-F3 or close the display cover whenever you are not actively using the computer. Then tap any key or open the display to resume.

Chapter 4 Moving with your Computer 65


Taking the Computer Home

Taking the Computer Home when you are moving from your office to your home or vice versa


After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home:

1. Remove all media from the drives. Failure to remove the media can damage the drive head.

2. Pack the computer in a protective case that can prevent the computer from sliding around and cushion it if it should fall.

Caution: Avoid packing items next to the top cover of the computer. Pressure against the top cover can damage the screen

What To Bring with You

Unless you already have some items at home, bring the following items with you:

❑ AC adapter and power cord

❑ The printed user’s manual

❑ Media bay modules

Special Considerations

Follow these guidelines to protect your computer while traveling to and from work:

❑ Minimize the effect of temperature changes by keeping the computer with you.



Taking the Computer Home

❑ If you need to stop for an extended period of time and cannot bring the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat.

❑ Changes in temperature and humidity can cause condensation. Allow the computer to return to room temperature, and inspect the screen for condensation before turning on the computer. If the temperature change is greater than 18°F (10°C), allow the computer to come to room temperature slowly. If possible, leave the computer for 30 minutes in an environment with a temperature between outside and room temperature.

Setting Up a Home Office

If you frequently work on your computer at home, it may be worthwhile purchasing a second AC adapter for use at home. With a second AC adapter, you can avoid transporting the extra weight to and from home.

If you use your computer at home for significant periods of time, you might also want to add an external keyboard, monitor, or mouse.



Traveling with the Computer

Traveling with the Computer when you are moving within a larger distance, for instance, from your office building to a client’s office building or traveling locally


Prepare the computer as if you were taking it home. Be sure the battery in the computer is charged. Airport security may require you to turn on your computer when bringing it into the gate area.


Bring the following items with you:

❑ AC adapter

❑ Spare, fully-charged battery packs

❑ Media bay modules

❑

Additional printer driver files if you plan to use another printer


In addition to the guidelines for taking the computer home, follow these guidelines to protect your computer while traveling:

❑ Always take the computer as carry-on luggage.

❑ Have the computer inspected by hand. Airport security

X-ray machines are safe, but do not put the computer through a metal detector.

❑ Avoid exposing floppy disks to hand-held metal detectors.



Traveling Internationally with the Computer

Traveling Internationally with the Computer when you are moving from country to country


Prepare the computer as you would normally prepare it for traveling.


Bring the following items with you.

❑

AC adapter

❑

Power cords that are appropriate to the country to which you are traveling

❑

Media bay modules

❑

Spare, fully-charged battery packs

❑

Additional printer driver files if you plan to use another printer

❑ Proof of purchase, in case you need to show it to customs officials

❑

International Traveler’s Warranty passport


Follow the same special considerations as when traveling with the computer. In addition, these tips are useful when traveling internationally.

❑ When traveling in another country, check that the local

AC voltage and the AC adapter power cord specifications are compatible. If not, purchase a power cord that is compatible with the local AC voltage. Do not use converter kits sold for appliances to power the computer.



Traveling Internationally with the Computer

❑ If you are using the modem, check if the modem and connector is compatible with the telecom system of the country you are traveling in.



5

Software

This chapter discusses the important system utilities bundled with your computer.

Contents

System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

PhDISK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Notebook Manager . . . . . . . . . . . . . . . . . . . . . . . . . 74

Information Viewer . . . . . . . . . . . . . . . . . . . . . 75

Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . 76

Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Setting the Supervisor Password . . . . . . . 78

Setting the User Password . . . . . . . . . . . . 79

Power Management . . . . . . . . . . . . . . . . . . . . . 80

Display Device. . . . . . . . . . . . . . . . . . . . . . . . . 81

Line-in/Microphone . . . . . . . . . . . . . . . . . . . . 82

Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Navigating the Setup Utility . . . . . . . . . . . 83

Main . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Hard Disk 0 Submenu . . . . . . . . . . . . . . . 86

CD-ROM/ATAPI Devices Submenu . . . . . 87

Boot Device Priority Submenu . . . . . . . . . 88

Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Setting a Password . . . . . . . . . . . . . . . . . 92

Removing a Password . . . . . . . . . . . . . . . 92

Power Saving. . . . . . . . . . . . . . . . . . . . . . . . . . 93

Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

71


System Software

System Software

The computer comes preloaded with the following software:

❑

Windows 98, Windows 95 (or Windows NT) operating system

❑ DMI-compliant hardware BIOS utility

❑

Support for LDCM (LANDesk Client Manager)

❑

System utilities, drivers and application software

Note: To access Windows 98, Windows 95 or Windows

NT software applications, click on the Start button and select the application folder. Then click on the application icon to run the selected application. To learn about the software and utility, make use of the online help provided by the software.



PhDISK

PhDISK

The PhDISK utility allows your computer to enter hibernation mode. Before entering hibernation mode, your computer saves all necessary inforcomputermation into a file or partition created by PhDISK, then shuts off power to all system components. On the next startup, the computer reloads the information from the PhDISK file or partition and resumes from where you left off.

Note: By default, this program is automatically loaded and set up on your computer so you do not need to run this program by yourself. You only need to run this if you upgrade your memory. You can find PhDISK in the

\windows\command\ directory.

The program accepts the following parameters:

Syntax

PHDISK [options] where options:

❑ /CREATE (/FILE or /PARTITION) creates the hibernation file or partition

❑

/DELETE (/FILE or /PARTITION) deletes the hibernation file or partition

❑ /INFO displays information on the hibernation file or partition

❑

/REFORMAT PARTITION reformats the existing hibernation file or partition

Caution: The Hibernation file is a hidden file named

SAVE2DSK.BIN; DO NOT delete or alter this file in any way except by using the PHDISK utility.

Improper deletion or alteration of this file could cause you to lose all access to your computer.

Chapter 5 Software 73


Notebook Manager


The computer has a built-in system setup program called

Notebook Manager. The Windows 98-/Windows 95-based

Notebook Manager allows you to set passwords, the startup sequence of the drives and power management settings. It also shows current hardware configurations.

Note: Certain hot key functions are disabled when you access the notebook manager, because these functions are also found in the notebook manager.

To start the Notebook Manager, press Fn-F2 or follow these steps:

1. Click on Start, Programs, then Notebook Manager.

2. Select the Notebook Manager application to run the program.

Note: Changes made to most settings in the Notebook

Manager take effect the next time the computer restarts. If you make changes in the Power Management, Display

Device and Line-in/Microphone screen, these changes take effect immediately.

Notebook Manager consists of six sections:

❑

Information Viewer

❑ Boot Sequence

❑ Password

❑ Power Management

❑

Display Device

❑

Line-in/Microphone

To select a section, click on the tab of the section you want to view.




Information Viewer

Information Viewer summarizes and lists information about the specifications and settings of the different components of your computer.

Note: Items in this table may differ slightly from the ones onscreen.

Item

CPU

Description

Brand, type and clock speed of the CPU

(Central Processing Unit)

Total Memory Total amount of main memory (in megabytes)

Video RAM Total amount of video memory (in megabytes)

Hard Disk Size of hard disk (in megabytes)

Serial Port 1

Serial Port 2

Resource settings of serial port 1

Resource settings of serial port 2




Item

Parallel Port

External

Cache

Touchpad

Pointing

Device

Description

Resource settings of the parallel port

Total amount of external cache memory (in kilobytes)

Setting of the internal pointing device

Type(s) of the pointing device(s) detected, internal and external

The current version of the computer’s BIOS shows before the Device-Configuration table.

Boot Sequence

Boot Sequence defines the boot sequence to follow when your computer boots up.

76

The Boot Sequence screen displays the bootable devices in your computer and the order in which the booting sequence will occur. The devices include the following:

User’s Guide



❑ Floppy Drive

❑ IDE Hard Drive

❑ CD-ROM Drive (or other bootable media bay module)

Simply drag and drop the devices the change the booting order. Click on Apply to accept.

Password

Password is used to set, modify or delete the password(s) for your computer.

There are two passwords used in the system:

❑ Supervisor Password. The supervisor password prevents unauthorized access to sensitive parameters in the Notebook Manager and BIOS Utility. It also prevents unauthorized access to your computer at system startup and at resume from standby/hibernation mode.

❑

User Password. The user password prevents unauthorized access to your computer at system startup and at resume from standby/hibernation mode.




Setting the Supervisor Password

Note: Before you can set the User Password, you need to set the Supervisor Password.

To set the Supervisor Password, follow these steps:

1. Click on the Change Supervisor Password button. The following dialog box displays:

2. Click on the Enable Supervisor Password checkbox.

3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your Supervisor Password.

4. Click in the Confirm Password textbox and retype the password.

5. Click on OK to accept.

Note: To change a password, follow the same steps used to set a password. To remove a password, follow the same steps used to set a password but leave both fields blank.




Setting the User Password

To set the User Password, follow these steps:

1. Click on the Change User Password button.

2. Click on the Enable User Password checkbox.

3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your User Password.

4. Click in the Confirm Password textbox and retype the password.

5. Click on OK to accept.

Note: To change a password, follow the same steps used to set a password. To remove a password, follow the same steps used to set a password but leave both fields blank.

You can also set password checks when the computer boots up and/or when the computer resumes from standby/ hibernation mode. Simply click on the desired checkbox(es) and click on Apply.




Power Management

Power Management is used to set various settings related to power management.

80

This includes the following power-saving-related features:

❑ Enable Heuristic Power Management. Select to enable

heuristic power management. See “Power Management

Modes” on page 40 for more information on heuristic

power management.

❑ Enabled display always on. Select to leave your display always turned on, useful when you need to make presentations on your computer.

❑ Enable modem ring resume on indicator. Select to allow the computer to wake-up from standby mode when an incoming modem ring is detected.

❑ Enable battery low warning beep. Select to allow the computer to give off warning beeps when the computer runs low on battery.

❑

Enable sleep upon battery low. Select to allow the computer to enter standby or hibernation mode when the computer runs low on battery.

User’s Guide



❑ Enable system resume timer. Select to allow the computer to wake-up from standby mode if the resume timer is set and matched.

❑

System Resume Timer. (When Enable system resume timer is selected) click on the button to set the System

Resume Timer.

Display Device

Display Device is used to control various settings related to display device(s), such as the display brightness/contrast levels.

The items in this screen include:

❑

Boot Display Device. Sets the default display device on boot-up.

❑ Switching Display Device. Sets the current display device.

Note: Make sure an external monitor is connected before

External monitor is selected.




❑ Brightness for LCD Panel/Contrast for LCD Panel. Click and drag to set the LCD screen brightness and contrast levels.

Note: TFT active-matrix LCDs have fixed and optimized contrast levels.

Click on the radio button of the desired item, then click on

Apply to accept. To modify the brightness and/or contrast levels, click and hold the slider control and move to the right to increase, move to the left to decrease the setting.

You can also click on the item, and use the cursor keys to set the desired level.

Line-in/Microphone

Line-in/Microphone is used to set the input source fro the computer’s line-in/microphone-in jack.

82

Click on the radio button of the desired item, then click on

Apply to accept.

User’s Guide


Setup Utility

Setup Utility

The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Ouput System).

Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 6, Troubleshooting when a problem arises.

To activate the Setup Utility, press F2 during POST (while the Extensa logo is being displayed.

Navigating the Setup Utility

There are five menu options: Main, Advanced, Security,

Power Saving and Exit. To navigate the Setup Utility:

❑

Press the cursor right/left keys

→← to move between the main menu items.

❑ Press Esc while you are in any of the menu options to display the Exit menu.

❑

Press the cursor up/down keys ↑↓ to move between parameters.

❑ Press the plus/minus keys +- to change the value of a parameter.

Note: You can change the value of a parameter if it is enclosed in square brackets.

❑ Press the Enter key to access a submenu. A > symbol in front of a parameter denotes an item with a submenu.

Note: Parameter explanations are displayed in the Item-

Specific Help section of the Setup Utility (right panel).

Navigation keys are shown on the bottom of the screen.



Setup Utility

Main

The Main screen contains parameters involving basic computer settings and hardware information.

84

The following table describes the parameters in this screen.

Settings in boldface are the default and suggested parameter settings.

Parameter Description

System

Time

System

Date

Sets the system time.

Format: HH:MM:SS (hour:minute:second)

Sets the system date.

Format: DD/MM/YYYY (day/month/year)

Floppy

Disk A

Hard Disk 0 Shows the hard disk size.

Press Enter to access the Hard Disk 0 submenu.

CD-ROM/

ATAPI

Devices

Selects the floppy disk drive type.

Options: 1.44 MB, 3½” or Disabled.

Shows the media bay module type installed.

Press Enter to access the CD-ROM/ATAPI Device submenu.

User’s Guide


Setup Utility

Parameter

Boot

Device

Priority

Speaker

Description

Press Enter to access the Boot Device Priority submenu.

Boot

Display

Device

Mic-in/

Line-in

Enables or disables the internal speakers on bootup. You can override this by toggling Fn-F8 during computer operation.

Options: Enabled or Disabled

Sets the display on boot-up.

When set to Auto, the computer automatically determines the display device. If an external display device (e.g., monitor) is connected, it becomes the boot display; otherwise, the computer LCD is the boot display. When set to

Both, the computer outputs to both the computer

LCD and an external display device if one is connected.

Options: Auto or Both

Sets the function of the microphon-in/line-in jack.

Options: Mic-in or Line-in

Shows the size of main memory.

System

Memory

Video

Memory

Shows the size of video memory.

CPU Type Shows the type of the CPU.

CPU Speed Shows the speed of the CPU.

VGA BIOS

Version

BIOS

Version

Shows the version number of the VGA BIOS.

Format: Vx Rx (version and release numbers)

Shows the version number of the BIOS.

Format: Vx Rx (version and release numbers)



Setup Utility

Note: The BIOS versions are important information about your computer. If you experience computer problems and need to contact technical support, this data helps our service personnel know more about your computer.

Hard Disk 0 Submenu

The hard disk 0 submenu allows you to set parameters related to your hard disk. Press Enter to access this submenu.

86




Type

Cylinders

Sets the hard disk type.

Options: Auto, User or None

Shows the number of cylinders of the hard disk.

Heads Shows the number of heads of the hard disk.

Sectors/Track Shows the number of sectors per track of the hard disk.

User’s Guide


Setup Utility

Parameter

Maximum

Capacity

Description

Shows the maximum capacity of the hard disk.

Note: The values for Cylinder, Heads, Sectors/Track and

Maximum Capacity are automatically set when the hard disk type is set to Auto. We suggest you set the hard disk type to [Auto] for hassle-free and correct hard disk detection. The computer’s BIOS automatically sets the parameters in this screen to their optimal values.

CD-ROM/ATAPI Devices Submenu

The CD-ROM/ATAPI Devices submenu allows you to set parameters related to the module installed in the media bay. Press Enter to access this submenu.

This screen resembles the Hard Disk submenu screen. You can refer to the Item Specific help to the right of the screen or the previous section for descriptions of these parameters.



Setup Utility

Note: We suggest you set the type to [Auto] for hassle-free and correct detection of the module installed in the media bay. The computer’s BIOS automatically sets the parameters in this screen to their optimal values.

Boot Device Priority Submenu

The Boot Device Priority submenu allows you to set the boot sequence of the bootable devices in your computer. Press

Enter to access this submenu.

88

The computer boots-up using the sequence specified in this submenu. To set the boot device priority, use the plus/ minus +- keys.

Boot Device Description

Removable

Devices

Computer boots from the removable device

(i.e., bootable floppy disk in the floppy drive).

Hard Drive

CD-ROM

Drive

Computer boots from the hard disk.

Computer boots from the CD-ROM drive (i.e., bootable CD-ROM in the CD-ROM drive).

User’s Guide


Setup Utility

Advanced

Caution: The parameters in this screen are for advanced users only. You do not need to change the values in this screen because these values are already optimized.

The Advanced screen contains parameters that are related to computer hardware.



Parameter

Serial Port

Base I/O

address

Interrupt

Description

Enables or disabled the serial port.


Sets the I/O address of the serial port.

Options: 3F8, 2F8, 3E8 or 2E8

Sets the interrupt request of the serial port.

Options: IRQ4, IRQ10, IRQ11 or IRQ 3



Setup Utility

Parameter

IrDA Port

Parallel Port

Mode

Base I/O

address

Interrupt

Description

Enables or disables the infrared port.


Enables or disables the parallel port.


Sets the operation mode of the parallel port.

Options: ECP, Bi-directional or Output only

Sets the I/O address of the parallel port.

Options: 378, 278, 3E8 or 2E8

Sets the interrupt request of the parallel port.

Options: IRQ 7 or IRQ 5

Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.



Setup Utility




User

Password is

Supervisor

Password is

When set, this password protects the computer and this Setup Utility from unauthorized entry.

When Password on boot and/or Password check during Resume is enabled, you need to enter this password to continue operation.

Before setting the user password, you need to set the Supervisor Password.

Options: Disabled or Enabled

When set, this password protects the computer and this Setup Utility from unauthorized entry. It also protects certain parameters in the Setup

Utility.

When Password on boot and/or Password check during Resume is enabled, you need to enter this password to continue operation.


Set

Supervisor

Password

Set User

Password

Password on boot

Password check during

Resume

Press Enter to set the supervisor password. See

“Setting a Password” on page 92 on how to set a

password.

Press Enter to set the user password. See “Setting a Password” on page 92 on how to set a

password.

When enabled, the computer prompts you for a password when the computer boots up.


When enabled, the computer prompts you for a password when the computer resumes from standby or hibernation mode.




Setup Utility

Note: To set the User Password or the Password on boot,

Password check during Resume and Diskette access parameters, you need to set the Supervisor Password first.

Setting a Password

Follow these steps:

1. Use the ↑ and ↓ keys to highlight a Set Password parameter (Supervisor or User) and press the Enter key.

The password box appears:

2. Type a password. The password may consist of up to seven characters (A-Z, a-z, 0-9).

Important: Be very careful when typing your password because the characters do not appear on the screen.

3. Press Enter. Retype the password to verify your first entry and press Enter.

After setting the password, the computer automatically sets the chosen password parameter to Enabled.

4. Press Esc to go to the Exit menu.

5. Press Save Change & Exit to save the password and exit the Setup Utility.

To change a password, follow the same steps used to set a password.

Removing a Password

Should you want to remove a password, do the following:

1. Use the ↑ and ↓ keys to highlight a Set Password parameter (Supervisor or User) and press the Enter key.



Setup Utility

The password box appears:

2. Press Enter twice without entering anything in the password box to remove the existing password.

3. Press Esc to go to the Exit menu.

4. Press Save Change & Exit to save the password and exit the Setup Utility.

Power Saving

The Power Saving screen contains parameters that are related to power-saving and power management.





94

Setup Utility

Parameter

Heuristic Power

Management

Display Always

On

Battery Low

Suspend

Resume on

Alarm

Resume Time

Date

Description

Enables or disables heuristic power

management. See “Power Management

Modes” on page 40 for more information on

power management modes


When enabled, the computer display is always on. You may want to set this if you are making a presentation on your computer.


Enables or disables the hibernation function during a battery-low condition.

When the computer is running very low on battery power, the computer will enter hibernation mode if PhDISK is installed and the

hibernation file is valid. See “PhDISK” on page

73.


When enabled and the system resume date and time are valid, the computer resumes

(wakes up) at the set time and date.


Sets the time the computer resumes at if

Resume on Alarm is enabled.

Format: HH:MM:SS (hour:minute:second)

Sets the date the computer resumes at if

Resume on Alarm is enabled.

Format: DD/MM/YYYY (day/month/year)

User’s Guide


Setup Utility

Parameter

Wake On LAN

Battery Low

Warning Beep

Description

When enabled, the computer wakes up from standby mode if the computer is accessed through the network. Consult your network administrator for details.


Enables or disables warning beeps during a battery-low condition.


Exit

When you select the Exit menu or press Esc from any screen, the Exit options screen displays.



Save Change &

Exit

Saves any changes made, exits the Setup utility and reboots.

Discard

Changes & Exit

Discards any changes made, exits the Setup utility and reboots.



Setup Utility

Parameter

Get Default

Values

Load Previous

Value

Save Changes

Description

Resets all parameters to their factory-default values.

Disregards any changes made in the current session and reloads their previous values.

Saves any changes made.

Note: If you make any parameter changes, select Save

Change & Exit or Save Changes to store your changes.



6

Troubleshooting

This chapter instructs you on how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer. Do not attempt to open the computer by yourself. Contact your dealer or an authorized service center for assistance.

Contents

Frequently-Asked Questions . . . . . . . . . . . . . . . . . . 98

Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . 103

97


Frequently-Asked Questions


This is a list of possible situations that may arise during the use of your computer, and gives easy answers and solutions to these questions.

I pressed the power switch and opened the display, but the computer does not start or boot-up.

Look at the Power indicator:

❑ If it is not lit, no power is being applied to the computer.

Check the following:

❑

If you are running on battery power, it may be low and unable to power the computer. Connect the AC adapter to recharge the battery pack.

❑

Make sure the AC adapter is plugged in properly to the computer and to the power outlet.

❑ If it is lit, check the following:

❑ If the Standby indicator is lit, the computer is in standby mode. Press any key or tap on the touchpad to resume.

❑ Is a non-bootable (non-system) diskette in the floppy drive? Remove or replace it with a system diskette and press Ctrl-Alt-Del to restart the system.

The operating system files may be damaged or missing.

Insert the startup disk you created during Windows 98/

Windows 95 setup into the floppy drive and press Ctrl-Alt-

Del to restart the system. This will diagnose your system and make necessary fixes.

Nothing appears on the screen.

The computer’s power management system automatically blanks the screen to save power. Press any key to turn the display back on.




If pressing a key does not turn the display back on, two things might be the cause:

❑ The contrast and/or brightness level might be too low.

Press Fn-

↑

and Fn-

↓

to adjust the contrast level (only for models with SCC LCDs). Press Fn← and Fn-

→

to adjust the brightness level.

❑ The display device might be set to an external monitor.

Press the display toggle hot key Fn-F6 to toggle the display back to the computer.

Image is not full-screen.

Make sure the resolution is set to 800x600 (12.1-inch displays) and 1024x768 (13.3-inch displays). Right-click on your Windows 98/Windows 95 desktop and select

Properties to bring up the Display Properties dialog box.

Then click on the Settings tab to make sure the resolution is set to the appropriate resolution. Resolutions lower than the specified resolution is not full-screen on the computer or on an external monitor.

No audio from the computer.


❑ The volume may be muted. In Windows 98/Windows

95, look at the volume control icon on the taskbar. If it is crossed-out, click on the icon and deselect the Mute option.

❑ The speakers may be turned off. Press Fn-F8 to turn the speakers on (this hot key also turns the speakers off).

❑ The volume level may be too low. In Windows 98/

Windows 95, look at the volume control icon on the taskbar. Click on the icon and adjust the level. You can also use the volume control knob on the right panel of the computer to adjust the volume.

Chapter 6 Troubleshooting 99



If headphones, earphones or external speakers are connected to the line-out port on the computer’s rear panel, the internal speakers automatically turn off.

External microphone or audio line-in device does not work.


❑

Make sure the external microphone or audio line-in device is connected to the line-in/microphone-in jack on the computer's rear panel.

❑

If you cannot hear playback, the speakers may be muted.

❑ Make sure the line-in/microphone-in jack is configured for the appropriate source. Run Notebook Manager and click on the Line-in/Microphone tab and set the input source correctly. Click on Apply to accept.

I want to eject the CD-ROM tray without turning on the power. I cannot eject the CD-ROM drive tray.

There is a mechanical eject button on the CD-ROM drive.

Simply insert the tip of a pen or paperclip and push to eject the CD-ROM tray.




The keyboard does not respond.

Try attaching an external keyboard to the PS/2 connector on the computer’s rear. If it works, contact your dealer or an authorized service center as the internal keyboard cable may be loose.

The serial mouse does not work.


❑

Make sure that the serial cable is plugged securely into the serial port.

❑ During POST, press F2 to access the Setup Utility. Go to the Advanced screen and verify that the serial port is

enabled. See “Advanced” on page 89 for details.

I prefer using an external keyboard and mouse, but both have PS/2 connectors and there is only one PS/2 port on the computer.

To connect two PS/2-type devices to the computer, you

need to use a PS/2 Y-bridge connector. See “PS/2 Y-Bridge

Cable” on page 56 for details.

The printer does not work.


❑ Make sure that the printer is connected to a power outlet and it is turned on.

❑

Make sure the printer cable is connected securely to the computer’s parallel port and the corresponding port on the printer.

❑ During POST, press F2 to access the Setup Utility. Go to the Advanced screen and verify that the parallel port

is enabled. See “Advanced” on page 89 for details.




The infrared port does not work.


❑ Make sure that the infrared ports of the two devices are facing each other (+/- 15 degrees) a maximum of 1 meter apart.

❑ Make sure there is a clear path between the two infrared ports. Nothing should be blocking the ports.

❑

Make sure you have the appropriate software running on both devices (for file transfers) or you have the appropriate drivers (for printing to an infrared printer).

❑

During POST, press F2 to access the Setup Utility. Go to the Advanced screen and verify that the infrared port is enabled.

❑

Make sure both devices are IrDA-compliant.

I want to set up my location to use the internal modem.

To properly use your communications software (e.g.,

HyperTerminal), you need to set up your location:

1. Open the Windows 98/Windows 95 Control Panel and double-click on the Modems icon.

2. Click on Dialing Properties and begin setting up your location.

Refer to the Windows 98/Windows 95 manual.



Error Messages

Error Messages

If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action.

Error Messages Corrective Action

CMOS Battery Bad Contact your dealer or an authorized service center.

CMOS Checksum Error Contact your dealer or an authorized service center.

Disk Boot Failure Insert a system (bootable) diskette in the floppy drive (A:), then press Enter to reboot.

Diskette Drive

Controller Error or No

Controller Present

Diskette Drive Error

Contact your dealer or an authorized service center.


Diskette Drive Type

Mismatch

Equipment

Configuration Error

Hard Disk 0 Error

Hard Disk 0 Extended

Type Error

I/O Parity Error

Press F2 (during POST) to enter the

Setup Utility; then press Esc to exit and reconfigure the computer.

Press F2 (during POST) to enter the







Error Messages

Error Messages

Insert system diskette and press <Enter> key to reboot

Keyboard Error or No

Keyboard Connected

Keyboard Interface

Error

Corrective Action

Insert a system (bootable) diskette in the floppy drive (A:), then press Enter to reboot.



Memory Size Mismatch Press F2 (during POST) to enter the


Missing operating system

Follow these steps:

1. Press F2 (during POST) to enter the

Setup Utility.

2. Enter the Hard Disk 0 submenu and correct the Hard Disk 0 type. See the specification label attached to hard disk drive. We suggest you set the Hard Disk 0 type to [Auto] for hard disk drive auto-detection.

3. Exit the Setup Utility (saving the changes).

Non-system disk or disk error. Replace and strike any key when ready

Insert a system (bootable) diskette in the floppy drive (A:), then press Enter to reboot.

Pointing Device Error Contact your dealer or an authorized service center.

Pointing Device

Interface Error

Protected Mode Test

Fail





Error Messages

Error Messages

RAM BIOS Bad

RAM Parity Error

Real-Time Clock Error

Video RAM BIOS Bad

Corrective Action



Press F2 (during POST) to reconfigure the computer.


If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems

may be solved using the BIOS Setup Utility. See “Setup

Utility” on page 83.




700-e.book : 700-ae.fm Page 107 Tuesday, July 28, 1998 10:24 AM

A

Specifications

This appendix lists the general specifications of your computer.

Microprocessor

Intel Mobile Module (IMM) with:

❑

Intel Pentium® II processor or Intel Pentium® processor with MMX™ technology

❑ Integrated 256KB or 512KB Level 2 cache memory

Memory

❑

16MB main memory expandable to 128 MB

❑ Two 144-pin soDIMM sockets (SDRAM - Synchronous

Dynamic Random Access Memory)

❑

64-bit dual memory banks

❑

256KB Flash ROM BIOS

Data Storage

❑

One 2.5-inch, 12.7mm removable hard disk

❑ One 3.5-inch internal floppy drive

❑ One 5.25-inch removable CD-ROM drive (media bay)

Display and Video

❑ 12.1-inch fast-response, high-contrast true-color Super

Clear Color LCD, or 12.1-/13.3-inch high- color Thin

Film Transistor LCD

❑

800x600 SVGA resolution (12.1-inch) or 1024x768 XGA resolution (13.3-inch)

❑ Integrated 128-bit graphics accelerator (PCI) and 2MB

EDO video memory

❑ Simultaneous LCD and CRT display

107


Specifications

Audio

❑

16-bit stereo audio (PCI)

❑ 3-dimensional sound with built-in wavetable synthesizer

❑ Dual speakers

❑ Sound Blaster Pro- and Windows Sound Systemcompatible

❑

Separate audio ports for line-out and line-in/ microphone-in devices

Keyboard and Pointing Device

❑ 84-/85-/88-key Windows 98/Windows 95 keyboard

❑ Ergonomically-centered touchpad pointing device

I/O Ports

❑ Two type II/I or one type III CardBus socket(s)

❑ One RJ-11 phone jack

❑

One DC-in jack (AC adapter)

❑

One FIR wireless communications port (IrDA-compliant)

❑ One RS-232 serial port (UART16550-compatible)

❑ One parallel port (ECP-compliant)

❑ One external monitor port (DDC 2.0-compliant)

❑

One keyboard/mouse port (PS/2-compatible)

❑

One mini docking station connector

❑ One speaker-/headphone-out jack

❑ One line-in/microphone-in jack

❑

One USB port

❑

One S-video jack



Specifications

Weight and Dimensions

❑

3.18 kg (7 lb)

❑ 308 x 251 x 45 mm (12.1 x 9.9 x 1.8 in)

Temperature

❑

Operating: 10°C ~ 35°C

❑ Non-operating: -20°C ~ 60°C

Humidity (non-condensing)

❑

Operating: 20% ~ 80% RH

❑ Non-operating: 20% ~ 80% RH

System

❑

Windows 98, Windows 95, or Windows NT (option) operating system

❑

DMI-compliant

❑

LDCM support

Battery Pack

❑

43-WattHour Lithium-Ion battery pack

❑

Smart battery management technology

❑ 2-hour rapid charge/3~4-hour charge-in-use

AC Adapter

❑

60-Watt

❑ Auto sensing 100~240Vac, 50~60Hz

Appendix A Specifications 109


Specifications

Options

❑

16-/32-/64-MB SDRAM memory upgrade module

❑ Higher-capacity hard disk drive

❑ Media bay modules: DVD-ROM drive, LS-120 drive, 2nd hard disk

❑

PS/2 Y-cable

❑

Full-function mini docking station

❑ Additional AC adapter and battery pack


700-e.book : 700-eIX.fm Page 111 Tuesday, July 28, 1998 10:24 AM

Index

A

AC adapter caring for

, xix

connecting

, xiv

Advanced Power

Management

, 44

APM. See Advanced Power

Management

audio

, 28

connecting externally

, 52

controlling volume

, 28

setting input source in

Notebook Manager , 82

setting input source in

Setup Utility

, 85

troubleshooting

, 99-100

B

battery installing

, xiv

battery pack battery-low warning

, 37

caring for

, xx

characteristics

, 32

charging

, 34

charging indicator

, 7

charging modes

, 34

checking charge level

, 35

installing

, 33

low conditions

, 38

optimizing

, 36

removing , 34

using the first time , 32

boot order setting in Notebook setting in Setup Utility

, 88

brightness

Manager

, 76

hot keys

, 14

setting in Notebook

Manager

, 82

C

caps lock , 9

on indicator , 8

care

AC adapter , xix

battery pack , xx

computer

, xix

CD-ROM ejecting

, 19

ejecting manually

, 100 troubleshooting , 100

charging checking level

, 35

modes

, 34

cleaning computer

, xx

computer bringing to meetings

, 65

caring for

, xix

cleaning

, xx

connecting

, xiv

disconnecting

, 64

features

, 3

information , 75

moving around

, 65

on indicator , 7

power management , 39

security

, 29

setting up a home office , 67

taking home

, 66

traveling

internationally , 69

traveling on local trips

, 68

troubleshooting , 97

Index 111


Index turning on

, xv

connections

AC adapter , xiv

audio

, 52

computer

, xiv

file transfer cable , 57

keyboard, external

, 47

keypad, external

, 48

monitor

, 46

mouse

, 49 mouse, PS/2 , 49

mouse, serial

, 50

printer

, 51

PS/2 y-bridge cable , 56

s-video

, 46

USB , 55

contrast hot keys

, 13

setting in Notebook

Manager

, 82

D

date setting in Setup Utility

, 84

diskette

ejecting , 18 diskette drive , 18

display , 5

auto-dim feature

, 40

hot keys

, 13

opening and closing

, 6

performance

, 5

power management

, 5, 40

setting boot device in

Notebook Manager

, 81

setting boot device in Setup

Utility

, 85

setting in Notebook

Manager , 81

simultaneous , 5

switching device in

Notebook Manager

, 81

troubleshooting

, 98, 99

DockMate V , 53

E

error messages , 103

F

FAQ. See frequently-asked questions

Fast Infrared. See infrared

file transfer cable

connecting , 57

FIR. See infrared

floppy disk

ejecting , 18

floppy drive

, 18

frequently-asked questions

, 98

H

hard disk

, 18

installing

, 61-62

power management

, 40

upgrading , 61

help

Internet home page , xvii online manual , xvii

technical support , xviii

Heuristic Power

Management , 39

Hibernation mode , 42-43 conditions , 42

entering

, 42

hot key

, 13


700-e.book : 700-eIX.fm Page 113 Tuesday, July 28, 1998 10:24 AM resuming from

, 43

utility

, 73

hot keys , 12

HPM. See Heuristic Power

Management

I

indicator lights

, 7

infrared , 22

troubleshooting

, 102

turning on and off

, 90

ITW. See warranty

K

keyboard

, 9

connecting externally

, 47

embedded numeric

keypad , 10

hot keys , 12

lock keys

, 9

troubleshooting

, 101

Windows 98/Windows 95 keys

, 11

keypad connecting externally

, 48

L

LEDs

, 7

M

media access

on indicator , 7

media bay , 18

swapping modules

, 19

memory installing

, 59-60

size configurations

, 58

Index

Index upgrading

, 58

messages

error , 103

microphone


modem

, 24

module swapping

, 19

monitor connecting

, 46

mouse

connecting externally , 49


N

Notebook Manager

, 74-82

Boot Sequence , 76

Display Device

, 81

hot key

, 12

Information Viewer

, 75

Password

, 77

Power Management

, 80

starting

, 74

num lock , 9

on indicator , 8

numeric keypad embedded

, 10

O

options

cables , 56

hard disk upgrade , 61

memory upgrade

, 58

mini docking station

, 53

PC Cards , 54

spare AC adapter

, 56

spare battery , 56

113


Index

P

palm rest , 15

parallel port setting in Setup Utility

, 90

password

, 29

changing in Setup

Utility

, 92

checking during boot , 91

checking during resume

, 91

removing in Setup

Utility

, 92

setting in Notebook

Manager

, 78-79

setting in Setup Utility

, 92

types

, 29

PC Card , 25

ejecting , 26

inserting

, 26

peripherals power management

, 40

PhDISK

, 73

ports , 21

bottom

, 27

left , 21

rear , 23

right , 25

power managing in Notebook

Manager

, 80

managing in Setup

Utility

, 93

turning on

, xv

power management

advanced , 44

heuristic

, 39

power management modes

display standby mode , 40

hard disk standby

114

mode

, 40

Hibernation mode

, 42-43

peripheral standby modes

, 40

Standby mode

, 40-42

printer

connecting , 51

troubleshooting

, 101

problems , 98

audio

, 99-100

CD-ROM

, 100

display

, 98, 99

infrared , 102

keyboard

, 101

printer

, 101 serial mouse , 101

startup

, 98

troubleshooting

, 97

PS/2 mouse

connecting , 49

PS/2 y-bridge cable

connecting , 56

Q

questions

multiple PS/2 devices , 101

setting location for modem use

, 102

S

safety

CD-ROM drive

, x

FCC notice

, v

general instructions

, vii

lithium battery

, xi

security keylock

, 29

passwords

, 29

User’s Guide


Index serial mouse connecting

, 50

serial port setting in Setup Utility

, 89

service

when to call , xx

Setup Utility

, 83-96

Advanced menu

, 89

Boot Device Priority submenu

, 88

CD-ROM/ATAPI Devices submenu

, 87

entering

, 83

Exit menu

, 95

Hard Disk 0 submenu

, 86

Main menu , 84

navigating

, 83

Power Saving menu , 93

Security menu

, 90

software bundled

, 72

speakers

hot key , 13

troubleshooting

, 99

specifications

, 107

Standby mode

, 40-42

condition , 41

entering

, 41

hot key , 12

resuming from

, 41

signals

, 41

status indicator

, 7

status indicators

, 7

storage

, 18 floppy drive , 18

hard disk

, 18

support information

, xviii

s-video , 22

connecting

, 46

T

time setting in Setup Utility

, 84

touchpad

, 16

hot key

, 13

using

, 16-17

travel

international flights , 69

local trips

, 68


turbo mode hot key

, 14

U

Universal Serial Bus

, 22

USB connecting

, 55

USB. See Universal Serial Bus

utility

BIOS Setup

, 83-96

Notebook Manager , 74-82

PhDISK

, 73

V

volume

adjusting , 28

W

warranty

International Traveler’s

Warranty

, xviii

Windows 98/Windows 95 keys

, 11

Index 115

Acer 710 Series Laptop User`s guide

Copyright © 1998 Acer Incorporated

All Rights Reserved — Printed in Taiwan

iii

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 iv

v

vi

vii

viii

ix

x

xi

xii

xiii

xiv

xv

xvi

Accessing Online Help

Getting Online

xvii

xviii

Taking Care of Your Computer

Taking Care of your AC Adapter

xix

Taking Care of your Battery Pack

Cleaning and Servicing

xx

1

Getting Familiar with your Computer

Contents

1

2 User’s Guide

Chapter 1 Getting Familiar with your Computer 3

4 User’s Guide

Chapter 1 Getting Familiar with your Computer 5

6 User’s Guide

Chapter 1 Getting Familiar with your Computer 7

8 User’s Guide

Special Keys

Lock Keys

Chapter 1 Getting Familiar with your Computer 9

Embedded Numeric Keypad

10

User’s Guide

Windows 98/Windows 95 Keys

Chapter 1 Getting Familiar with your Computer 11

Hot Keys

12 User’s Guide

Chapter 1 Getting Familiar with your Computer 13

14 User’s Guide

Keyboard Ergonomics

Chapter 1 Getting Familiar with your Computer 15

Touchpad Basics

16 User’s Guide

Chapter 1 Getting Familiar with your Computer 17

Hard Disk

Floppy Drive

Media Bay

18 User’s Guide

Chapter 1 Getting Familiar with your Computer 19

20 User’s Guide

Left Ports

Chapter 1 Getting Familiar with your Computer 21

S-Video

Fast Infrared

Universal Serial Bus

22 User’s Guide

Rear Ports

Chapter 1 Getting Familiar with your Computer 23

Fax/Data Modem

24 User’s Guide

Right Ports

PC Card Slots

Chapter 1 Getting Familiar with your Computer 25

26

User’s Guide

Bottom Port

Chapter 1 Getting Familiar with your Computer 27

28

User’s Guide