PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
R
EN
PKG-1000P
Rear Seat Entertainment Package
Système de divertissement pour les sièges arrière
Paquete de entretenimiento para asientos traseros
Entertainment-Paket für den Rücksitz
Sistema di intrattenimento per sedili posteriori
Underhållningspaket för baksäte
a
u
.
m
o
c
.
0
3
1
•
OWNER'S MANUAL
Please read before using this equipment.
•
BEDIENUNGSANLEITUNG
Bitte vor Gebrauch des Gerätes lesen.
•
MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
•
MANUALE DI ISTRUZIONI
Si prega di leggere il manuale prima di
usare il sistema.
•
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
•
HANDBOK
Läs denna handbok innan du använder
utrustningen.
FR
ES
DE
IT
ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD.
ALPINE ELECTRONICS FRANCE S.A.R.L.
1-1-8 Nishi Gotanda
Shinagawa-ku
Tokyo 141-0031, Japan
Phone 03-5496-8231
161-165 Princess Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. paris Nord II,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ELECTRONICS GmbH
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place
Torrance, California 90501 U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS OF U.K., LTD.
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road
Toronto, Ontario M3J 2M9 Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE House
Fletchamstead Highway, Coventry CCV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Tel.: 02-725 1315
SV
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, España
Phone 945-283588
Designed by ALPINE ELECTRONICS OF AMERICA, INC.
Printed In Taiwan
PKG-1000P_EN.indd i
5/17/2005 3:43:29 PM
Autogood products internet store http://130.com.ua
PKG-1000P
Rear Seat Entertainment Package
•
•
•
•
•
TMX-R1000P (VGA MOBILE CINEMA MONITOR)
SHS-N100 (SINGLE SOURCE IR HEADPHONE)
RUE-4155 (UNIVERSAL REMOTE CONTROL)
INSTALLATION BRACKET
TRIM RING
PKG-1000P
Système de divertissement pour les sièges arrière
•
•
•
•
•
TMX-R1000P (MONITEUR CINÉMA MOBILE VGA)
SHS-N100 (CASQUE IR À UNE SOURCE UNIQUE)
RUE-4155 (TÉLÉCOMMANDE UNIVERSELLE)
SUPPORT DE FIXATION
BAGUE DE GARNITURE
PKG-1000P
a
u
.
m
o
c
.
0
Paquete de entretenimiento para asientos traseros
•
•
•
•
•
TMX-R1000P (MONITOR VGA DE CINE MÓVIL)
SHS-N100 (AURICULARES SENCILLOS POR INFRARROJOS)
RUE-4155 (MANDO A DISTANCIA UNIVERSAL)
SOPORTE DE INSTALACIÓN
ANILLO DE COLOCACIÓN
PKG-1000P
Entertainment-Paket für den Rücksitz
•
•
•
•
•
3
1
TMX-R1000P (MOBILER VGA-CINEMA-MONITOR)
SHS-N100 (SINGLE-SOURCE-IR-KOPFHÖRER)
RUE-4155 (UNIVERSALFERNBEDIENUNG)
MONTAGEWINKEL
ANPASSUNGSRING
PKG-1000P
Sistema di intrattenimento per sedili posteriori
•
•
•
•
•
TMX-R1000P (MONITOR MOBILE VGA PANORAMICO)
SHS-N100 (CUFFIE IR A SORGENTE SINGOLA)
RUE-4155 (TELECOMANDO UNIVERSALE)
SUPPORTO DI INSTALLAZIONE
ANELLO ADATTATORE
PKG-1000P
Underhållningspaket för baksäte
•
•
•
•
•
TMX-R1000P (VGA MOBIL BIOMONITOR)
SHS-N100 (IR-HÖRLURAR, ENKEL KÄLLA)
RUE-4155 (UNIVERSELL FJÄRRKONTROLL)
INSTALLATIONSFÄSTE
TRIMRING
PKG-1000P_EN.indd ii
5/17/2005 1:39:34 PM
Autogood products internet store http://130.com.ua
ENGLISH
Contents
Operating Instructions
ntents
WARNING
WARNINGS ..................................... 2
CAUTION ......................................... 3
PRECAUTIONS ................................ 3
Monitor Features
Features ............................................................. 4
Overhead Monitor ............................................. 4
Remote Control ................................................. 4
TV Tuner Control
Selecting Preset Channel ..................................11
Seeking Channel Manually ..............................11
Memorizing Channel ........................................11
Wireless Headphone
Headphone Receivers .......................................11
Operation ..........................................................11
Battery Installation ...........................................11
Information
a
u
.
m
o
c
.
0
Overhead Monitor Control
Screen Display ON/OFF ................................... 5
Audio Mute Function ........................................ 5
Adjusting the Volume ........................................ 5
Switching the Source......................................... 5
Setting the Backlight Brightness ....................... 5
Adjusting Picture ............................................... 6
Adjusting Brightness ................................ 6
Adjusting Color Density ........................... 6
Adjusting Tint ........................................... 6
Adjusting Contrast .................................... 6
Adjusting Sharpness ................................. 7
Resetting the Picture Adjustment ............. 7
Switching Display Mode ................................... 7
Visual EQ Operation ......................................... 8
System Setup Operation .................................... 9
3
1
DVD Player Control
In Case of Difficulty ........................................ 12
Remote Control Battery Replacement ............ 12
Accessories ..................................................... 13
Specifications ................................................. 13
Installation and Connections
ntents
WARNING
WARNINGS ................................... 14
CAUTION ....................................... 14
PRECAUTIONS .............................. 14
Installation and Connections ........................... 14
Power Connections.......................................... 15
Dome Light Connection .................................. 16
System Connections ........................................ 17
Playing and Pausing ........................................ 10
Stopping .......................................................... 10
Skipping Forward ............................................ 10
Skipping Backward ......................................... 10
Selecting Menu................................................ 10
DVD Setup Operation ..................................... 10
1-EN
PKG-1000P_EN.indd EN1
5/17/2005 1:39:34 PM
Autogood products internet store http://130.com.ua
Operating Instructions
INSTALL THE PRODUCT CORRECTLY SO THAT THE
DRIVER CANNOT WATCH TV/VIDEO UNLESS THE
VEHICLE IS STOPPED AND THE EMERGENCY BRAKE
IS APPLIED.
WARNINGS
WARNING
This symbol means important
instructions.
Failure to heed them can result in serious
injury or death.
It is dangerous (and illegal in many states) for the
driver to watch the TV/Video while driving the vehicle.
The driver may be distracted from looking ahead and
an accident could occur. If the product is not installed
correctly, the driver will be able to watch the TV/Video
while driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or other
people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking
ahead of the vehicle and cause an accident.
a
u
.
m
o
c
.
0
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
3
1
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
in fire.
2-EN
PKG-1000P_EN.indd EN2
5/17/2005 1:39:35 PM
Autogood products internet store http://130.com.ua
PRECAUTIONS
CAUTION
This symbol means important
instructions.
Failure to heed them can result in injury
or material property damage.
Temperature
Be sure the temperature inside the vehicle is between
+60°C (+140°F) and -10°C (+14°F) before turning your unit on.
Fuse Replacement
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized ALPINE dealer or the
nearest ALPINE Service Center for repairing.
When replacing the fuse(s), the replacement must be of the same
amperage as shown on the fuse holder. If the fuse(s) blows more
than once, carefully check all electrical connections for shorted
circuitry. Also have your vehicle’s voltage regulator checked.
KEEP FINGERS OR ANY OBJECT AWAY WHEN CLOSING THE
MONITOR.
Maintenance
Failure to do so may result in personal injury or damage to the
product.
If you have problems, do not attempt to repair the unit yourself.
Return it to your ALPINE dealer or the nearest ALPINE Service
Station for servicing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT
WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+
and –) as instructed.
Rupture or chemical leakage from the battery may cause fire or
personal injury.
Installation Location
Make sure the TMX-R1000P will not be exposed to:
• Direct sun and heat
• Excessive dust
• High humidity
• Excessive vibrations
a
u
.
m
o
c
.
0
Characteristics of LCD Panel
3
1
• After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to LCD
technology and is normal.
• Under cold temperature conditions, the screen may lose
contrast temporarily. After a short warm-up period, it will
return to normal.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio
is over 99.99%. This means that 0.01% of the pixels could be
either always ON or OFF.
Using Wireless Headphones
If ACC or the monitor's power source is turned off, a loud noise is
produced through the headphones. Be sure to remove the wireless
headphones from your ears before you turn the monitor off.
3-EN
PKG-1000P_EN.indd EN3
5/17/2005 1:39:35 PM
Autogood products internet store http://130.com.ua
LCD Monitor Panel
Monitor Features
This is a 10.2 inch, Wide VGA, Active Matrix LCD. In
addition, an Infrared Wireless Headphone Transmitter is
located on top of the LCD panel.
Features
The ALPINE TMX-R1000P provides the following
• 10.2 inch Wide VGA TFT Active Matrix Color LCD
(800 x 480)
• 3 AUX In / 1 AUX Out
• 1 Remote In / 2 Remote Out
• Front Panel Controls (OHM / DVD / DVD-HU / TV
Tuner)
• Visual EQ (FLAT, NIGHT MOVIE, SOFT, SHARP,
CONTRAST)
• Independent parameter setting on each AUX input
(Picture/Visual EQ/Audio Input Level/Display
Mode)
• 3 Level Dimmer (HIGH/MID/LOW)
• CH Selectable IR Transmitter for IR Headphones
(A/B/OFF)
• DVD Power Control
• Customized OSD Source Name
• White LED Dome Light
• The power state of the monitor is memorized when
Ignition/ACC is turned off. When Ignition/ACC is
turned back on, the monitor returns to the power state
memorized (either ON or OFF).
Monitor Open Button
Press Monitor Open Button to release the Monitor Panel.
The Panel will drop down slightly allowing you to fully
open to its 90 degree or greater position. To close, firmly
press the LCD Monitor Panel back up into the housing
until a click is heard.
White LED Dome Light
White LED Dome Light connection has polarity. Be
cautious when installing the monitor. Refer to Dome Light
Connection (Page 16).
Back-Lit Function Buttons
a
u
.
m
o
c
.
0
Blue, back-lit function button illuminates when the
overhead monitor main power is on. Overhead monitor,
DVD player, DVD-HU and TV tuner can be controlled by
using these buttons.
Remote Control
Overhead Monitor
3
1
White LED Dome Light
TMX-R1000P Overhead
Monitor Control
Infrared Wireless
Headphone
Transmitter
ALPINE DVD Player
Control
(Refer to DVA-5210
or DVE-5207 Owner’s
Manual)
LCD Monitor Panel
Back-Lit Function
Button
Aux 3 Input
ALPINE TV-Tuner Control
(Refer to ALPINE TVTuner Owner’s Manual)
Monitor Open Button
When you use Remote Control for the first time, pull the
plastic tape before using the remote control.
Dome Light Switch
4-EN
PKG-1000P_EN.indd EN4
5/17/2005 1:39:36 PM
Autogood products internet store http://130.com.ua
Adjusting the Volume
Overhead Monitor
Control
POWER
SELECT
Volume can be controlled from the headphone or your
own radio volume function.
1
2
DIMMER
Turn on POWER on the headphone.
Adjust the volume level by turning clockwise
for louder and counter-clockwise for lower on
the headphone.
Refer to Wireless Headphone (Page 11)
Switching the Source
Front Panel Controls
POWER
1
Press SEL on the remote control or SELECT
on the Front Panel Controls to change each
source.
2
Press SEL/SELECT to switch to the different
sources.
SELECT
a
u
.
m
o
c
.
0
DIMMER
MUTE
Remote Control
Screen Display ON/OFF
Setting the Backlight Brightness
Front Panel Controls
1
2
Press POWER to turn ON.
3
1
To turn off the power, press and hold POWER
again.
• While the power is ON, press POWER to activate the
Mute function.
Remote Control
1
2
• Inside ( ) is default setting. The source name is
selectable. When it is OFF, the source will be skipped.
• OSD (On Screen Display) will be turned off
automatically, when not operating more than 10
seconds.
Press POWER to turn ON.
The brightness of the LCD panel’s backlighting is
adjustable to more closely match the vehicle’s interior
lighting. This makes the screen easier to view.
1
2
Press DIMMER.
Press DIMMER to cycle through the OSD as
HIGH, MID, LOW and HIGH. (Default: HIGH)
To turn off the power, press POWER again
Audio Mute Function
Front Panel Controls
1
While the power is ON, press POWER to
activate the Mute function.
2
Press POWER again turn it OFF the Mute
function.
Remote Control
Press MUTE to turn it ON and OFF.
5-EN
PKG-1000P_EN.indd EN5
5/17/2005 1:39:39 PM
Autogood products internet store http://130.com.ua
Adjusting Picture
Adjusting Color Density
Brightness, color, tint, contrast and sharpness can be
adjustable.
2
3
Press ▲ or ▼ and select COLOR.
4
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds, otherwise
OSD (On Screen Display) will be automatically turned
off.
• When the adjustment is made, “FLAT” setting in Visual
EQ changes to “CUSTOM”. After reset, “CUSTOM”
changes back to “FLAT”
1
Press or to adjust the color density.
Change depth can be adjusted from –15 (MIN)
to +15 (MAX).
Press and hold the SELECT button for at
least 2 seconds to open SETUP screen. Make
sure the PICTURE display mode is selected.
SELECT
a
u
.
m
o
c
.
0
Front Panel Controls
Adjusting Tint
2
3
SELECT
Press ▲ or ▼ and select TINT.
Press or to adjust the tint. Tint tone can
be adjusted from G15 (G MAX) to R15 (R
MAX).
Remote Control
Adjusting Brightness
2
3
4
3
1
Press ▲ or ▼ and select BRIGHT.
Press or to adjust the brightness.
Brightness can be adjusted from –15 (MIN) to
+15 (MAX).
4
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Contrast
2
3
Press ▲ or ▼ and select CONTRAST.
4
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Press or to adjust the contrast. Contrast
can be adjusted from –15 (LOW) to +15
(HIGH).
Press the ENT button to finish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
6-EN
PKG-1000P_EN.indd EN6
5/17/2005 1:39:40 PM
Autogood products internet store http://130.com.ua
Adjusting Sharpness
2
3
Press ▲ or ▼ and select SHARPNESS.
4
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Press or to adjust the screen quality.
Screen quality can be adjusted from -15
(SOFT) to +15 (HARD).
1
Press and hold SELECT for at least 2
seconds to show the SETUP menu.
2
Press SELECT to switch to DISP MODE from
PICTURE. To change each mode, press ▲ or
▼.
Each press changes the display modes as follows:
Resetting the Picture Adjustment
2
a
u
.
m
o
c
.
0
Press ▲ or ▼ and select RESET.
WIDE
Normal images are expanded uniformly in the
horizontal direction and are displayed over the entire
screen.
3
Press ENT to reset the picture adjustments.
• If you do not press ENT within 10 seconds, OSD
disappears and the reset adjustments will not be saved.
3
1
Switching Display Modes
ZOOM
Normal images are expanded in the horizontal
direction and are displayed over the entire screen. The
expansion ratio increases towards the right and left
edges of the screen.
Display mode on the screen can be adjusted to Wide,
Zoom, Cinema and Normal.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds,
otherwise OSD (On Screen Display) will be
automatically turned off.
SELECT
CINEMA
Normal images are expanded in the horizontal and
vertical directions. The top and bottom of the image
are cut off. This mode is suited for 16:9 cinema size
images.
Front Panel Controls
NORMAL
Normal image (4:3)
SELECT
3
Press the ENT button to finish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
Remote Control
7-EN
PKG-1000P_EN.indd EN7
5/17/2005 1:39:45 PM
Autogood products internet store http://130.com.ua
3
VISUAL EQ Operation
You can select a mode suitable for the subject image.
Press ENT to finish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds,
otherwise OSD (On Screen Display) will be
automatically turned off.
DIMMER
Front Panel Controls
DIMMER
a
u
.
m
o
c
.
0
Remote Control
1
Press and hold DIMMER for at least 2
seconds to show the VISUAL EQ OSD.
2
To change VISUAL EQ, press DIMMER or
press ▲ or ▼ to cycle through the OSD as
FLAT, NIGHT MOVIE, SOFT, SHARP, HIGHT
CONT, and FLAT. (Default: SHARP)
3
1
VISUAL EQ mode (manufacturer’s settings) selection
(VISUAL EQ MODE)
FLAT:
Normal Setting (Visual EQ OFF)
NIGHT MOVIE: Suitable for movies in which dark
scenes frequently appear.
SOFT:
Suitable for CGs and animated
films.
SHARP:
Suitable for old movies where
images are not clearly shown.
CONTRAST:
Suitable for recent movies.
• “FLAT” will change to “CUSTOM”, when any of the
picture mode (Brightness, Color, Tint, Contrast and
Sharpness) has been adjusted
• NIGHT MOVIE, SOFT, SHARP and CONTRAST
are fixed values. They cannot be set manually. If the
picture mode is changed, they automatically change to
CUSTOM mode.
• To return FLAT mode, press RESET on the picture
mode, or change values of BRIGHT, COLOR, TINT,
CONTRAST and SHARPNESS to 0 manually.
8-EN
PKG-1000P_EN.indd EN8
5/17/2005 1:39:50 PM
Autogood products internet store http://130.com.ua
System Setup Operation
IR transmitter, source names and Audio levels can be
adjusted for all available sources.
• Once this adjustment is made, all sources are affected.
SELECT
ENT
AUDIO LEVEL 2 (Setting for Aux2):
Press and to select HIGH/MID/LOW. (Default:
HIGH)
AUDIO LEVEL 3 (Setting for Aux3):
Press and to select HIGH/MID/LOW. (Default:
HIGH)
FACTORY DEFAULT:
Press ENT Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Visual EQ, Display Mode are also reset.
Front Panel Controls
Customizing Source Name
ENT
Your desired OSD source name can be defined up to 6
characters.
SELECT
4
5
Press
6
Press ▲ ▼
and ENT key to select the
character “A-Z”, “0-9”, “-“, space and “.”.
and
to select USER.
Press ENT key. Character setting menu
appears.
a
u
.
m
o
c
.
0
Remote Control
1
Press and hold SELECT for at least 2
seconds to show the SETUP menu.
2
Press SELECT twice to switch to SYSTEM
screen.
“DEL”:
“CLR”:
“OK”:
Delete one character at a time.
Clear entire characters.
Confirm source name and exit
from character setting menu.
• This setting will not disappear until selecting OK to exit
the screen.
3
3
1
Press ▲ or ▼ to change each mode
IR TRANS:
Press and
to select A/B/OFF. (Default: A)
SOURCE NAME 1:
Press and to select AUX1/DVD/DVD-HU/TV/
GAME/USER (Default: DVD)
SOURCE NAME 2:
Press and to select AUX2/DVD/DVD-HU/TV/
GAME/USER/OFF* (Default: TV)
SOURCE NAME 3:
Press and to select AUX3/GAME/USER/OFF*
(Default: GAME)
• When OFF is selected, source selection skips to
the next input. (AUX1 cannot be turned OFF.)
AUDIO LEVEL 1 (Setting for Aux1):
Press and to select HIGH/MID/LOW. (Default:
HIGH)
9-EN
PKG-1000P_EN.indd EN9
5/17/2005 1:39:51 PM
Autogood products internet store http://130.com.ua
Skipping Backward
DVD Player Control
To control the DVD player and DVD-HU from the Front
Panel Controls, set source names to DVD and DVD-HU
in the System Setup.
• Refer to ALPINE DVD Player/DVD Changer/DVD
Head Unit Operation Manual for details.
MENU
ENT
Press
to skip back to the previous chapter or
track. Press and hold
to fast reverse movie or
music.
Selecting Menu
Front Panel Controls
/
Press MENU to show the DVD Menu. Use
and ENT to control.
Front Panel Controls
Press and Hold MENU to show the DVD SETUP
Menu. Use
and ENT to control.
Remote Control
PLAY/PAUSE
a
u
.
m
o
c
.
0
SKIP
BACKWARD
STOP
SKIP FORWARD
MENU
Remote Control
Remote Control RUE-4155 cannot be used for
ALPINE DVD Head Unit. It is for DVD player only. To
control the DVD Head Unit, use the remote control
included in DVD Head Unit or ALPINE universal
remote control RUE-4191.
3
1
Playing and Pausing
Press MENU to show the DVD Menu. Use
and ENT to control.
When DVD is stopped, press SETUP to show the
DVD SETUP Menu. Use
and ENT to
control.
Press / to play movie or music. Press
to pause.
/
again
DVD Setup Operation
The following is common for changing the settings of
ALPINE DVD players.
• Refer to the specific ALPINE DVD Player/DVD
Changer/DVD Head Unit Operation Manual for more
detailed information.
Front Panel Controls
MENU
While in stop mode, press and hold MENU for at least
2 seconds. MENU on Front Panel Controls can be
used for DVD Changer and DVD Head Unit ONLY, not
for DVD Player
The setup menu appears on the monitor.
Stopping
Press to stop movie. “PRE-STOP” appears on the
screen by single click. Press one more time, “STOP”
appears on the screen.
Remote Control
SETUP
Skipping Forward
Press
to skip ahead to the next chapter or track.
Press and hold
to fast forward movie or music.
Press SETUP when in stop mode.
10-EN
The setup menu appears on the monitor.
PKG-1000P_EN.indd EN10
5/17/2005 1:40:16 PM
Autogood products internet store http://130.com.ua
TV Tuner Control
Wireless Headphone
To control TV tuner from the Front Panel Controls, set
source name to TV in the System Setup.
Headphone Receivers
• Refer to ALPINE TV Tuner Operation Manual for
details.
ENT
Front Panel Controls
1) Infrared Sensors; Receive signal from the
transmitter.
2) Battery Cover
3) Volume Control
4) Power Switch
5) Power Indicator LED
a
u
.
m
o
c
.
0
Remote Control
Selecting Preset Channel
Press CH ▲ or CH ▼ to select preset channel
memorized by SCAN on the remote control or ENT
on the Front Panel Controls.
3
1
Seeking Channel Manually
Operation
Read carefully to prevent damage to the
headphone or your ears:
WARNING: Before turning on the power, remove
headphones and turn the volume down as low as possible.
Press
or
to seek Channel manually.
Channel moves UP or DOWN one by one.
or
, Channel Seek will start
Press and Hold
and stop when next higher or lower available CH
is found.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down
before placing it on your ears and turning on the
power.
3) Turn on the headphone power and adjust the
headphone volume to a comfortable level (You can
increase the audio source volume if needed).
Memorizing Channel
Battery Installation
Press SCAN on the remote control or ENT on the
Front Panel Controls to memorize the receivable
channels in the entire TV broadcast band.
Place two AAA batteries into the battery compartment of
the headphone(s), making sure that the battery polarity is
correct.
11-EN
PKG-1000P_EN.indd EN11
5/17/2005 1:40:21 PM
Autogood products internet store http://130.com.ua
Remote Control Battery
Replacement
Information
Battery type: CR2025 battery or equivalent.
In Case of Difficulty
1
If you encounter a problem, please review the items in the
following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the
rest of your system is properly connected or consult your
authorized ALPINE dealer.
Opening the battery case
Slide out the battery cover while firmly pressing in
the direction of the arrow.
No function or display.
• Car's ignition is off.
- Turn the ignition on.
• No fuse or blown fuse.
- Check the cause and replace the fuse.
• Incorrect connections.
- Check connection and remedy.
• Vehicle's battery is weak.
- Check the voltage of vehicle's battery.
a
u
.
m
o
c
.
0
No picture display.
2
• Brightness control is set for minimum brightness
control.
- Adjust the brightness.
• Incorrect setting of the mode.
- Switch to the correct mode.
- Check the connection to the source unit.
- Check the power of the source unit.
• Incorrect or open connection with the Monitor, AV
interface unit.
- Check the connection and remedy.
Picture color is poor.
3
1
Replacing the battery
Put the battery in the case with the (+) indication
upward as shown in the illustration.
• Placing a battery in backwards way may cause a
malfunction.
• Brightness/Color/Tint/Contrast/Sharpness control
are not set to the proper positions.
- Check each control.
Spots or dotted lines/stripes appear.
• Caused by neon signs, high-voltage power lines,
CB transmitter, other vehicle's ignition plugs, etc.
- Change the location of your vehicle.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Unit does not operate.
• Monitor's power is not turned on.
- Turn on the monitor's power.
Due to continuous product improvement,
specifications and design are subject to change
without notice.
Warning
DO NOT OPERATE ANY FUNCTION THAT
TAKES YOUR ATTENTION AWAY FROM
SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a
complete stop. Always stop the vehicle in a safe
location before performing these functions. Failure
to do so may result in an accident.
12-EN
PKG-1000P_EN.indd EN12
5/17/2005 1:40:25 PM
Autogood products internet store http://130.com.ua
Accessories
Specifications
Check accessory parts.
Video Display System
DIN Cable (8 pin / 5m)
Power Supply
Connector
DISPLAY SCREEN
Hideaway AV Box
Size
Width
Height
Aspect Ratio
Type
X1
RUE-4155 Universal
Remote Control
X1
X1
SHS-N100 Single
Source Wireless IR
Headphone
NTSC/PAL Compatibility
Installation Bracket*1
System
Number of Elements
Effective Number of
Elements
Back Light
10.2”
221mm (8.70”)
132mm (5.20”)
16:9
Transparent type TN
Liquid Crystal Display
TFT-LCD, Active Matrix
800(W) x 480(H) x 3
1.152M pixels (VGA)
99.9% or more
Cold Cathode Fluorescent
Lamp
GENERAL
Operating Voltage
X1
a
u
.
m
o
c
.
0
X1
Screws (for
Installation Bracket)
Trim Ring*2
X1
Screws (for Trim Ring)
Power Consumption
Video Input
Audio Input
IR Transmitter
Operating Temperature
X1
X4
Battery , CR2025
(Included in Remote
control)
AAA Battery
X2
X9
10.2 inch WVGA LCD Monitor
MONITOR
Width
Height
Depth
Weight
3
1
X1
10 – 16 V DC
(Typical: 12V)
1.12A (Power On)
140mA (Stand by)
1.0V p-p 75ohm
2.0V rms (max)
CH A: 2.3MHz / 2.8MHz
CH B: 3.2 MHz / 3.8MHz
+14 ˚F to +140 ˚F (-10 ˚C
to + 60 ˚C)
286 mm (11.26”)
36 mm (1.42”)
287 mm (11.30”)
1.6Kg (3lbs. 8.4 oz.)
AV BOX
Width
Height
Depth
Weight
70[84] mm (2.76[3.31]”)
21 mm (0.83”)
92[112] mm (3.62[4.41]”)
220g (7.8 oz)
X1
Installation of Bracket and Trim Ring
x4
*1 Installation Bracket is used to stabilize the monitor
at the time of installing the monitor. Ask ALPINE
dealer for detail.
x9
*2 Trim Ring is used to make the monitor suitable to
your vehicles ceiling shape at the time of installing
the monitor. Ask ALPINE dealer for detail.
13-EN
PKG-1000P_EN.indd EN13
5/17/2005 1:40:27 PM
Autogood products internet store http://130.com.ua
Installation and Connections
Before installing or connecting the unit,
please read the following and pages 2 and
3 of this manual thoroughly for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place.
This may cause parts to become loose resulting in hazards or
product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED
BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
a
u
.
m
o
c
.
0
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
3
1
Bolts or nuts used for the brake or steering systems (or any
other safety-related system), or tanks should NEVER be used
for installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post
before installing your TMX-R1000P. This will reduce any
chance of damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to
the diagram. Incorrect connections may cause the unit to
malfunction or damage the vehicle's electrical system.
• When making connections to the car’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power
for this unit. When connecting the TMX-R1000P to the
fuse box, make sure the fuse for the intended circuit of the
TMX-R1000P has the appropriate amperage. Failure to
do so may result in damage to the unit and/or the vehicle.
When in doubt, consult your ALPINE dealer.
• The TMX-R1000P uses female RCA-type jacks for
connection to other units having RCA connectors. You
may need an adaptor to connect other units. If so, please
contact your authorized ALPINE dealer for assistance.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER
SEAT AIR BAG.
If the unit is not installed correctly the air bag may not function
correctly and when triggered the air bag may cause the monitor to
spring upwards causing an accident and injuries.
IMPORTANT
Please record the serial number of your unit in the space
provided below and keep it as a permanent record. The serial
number plate is located on the rear of the monitor or on the
bottom of the AV interface unit.
SERIAL NUMBER:
____________________________
INSTALLATION DATE:
_________________________
INSTALLATION TECHNICIAN:
__________________
PLACE OF PURCHASE:
_______________________
14-EN
PKG-1000P_EN.indd EN14
5/17/2005 1:40:35 PM
Autogood products internet store http://130.com.ua
Power Connections
ALPINE's TMX-R1000P needs the following power
connections to assure proper operation of the monitor.
ACC
Red
Connect this line to the
vehicle's ACC line.
(Switched 12V, ignition)
GND
Black
Connect this line to the
vehicle's GND line.
a
u
.
m
o
c
.
0
POWER CONTROL
Blue/White
3
1
Connect this line to the ALPINE
DVD player's ACC line, which
is red.
It controls turning the power
ON/OFF for the ALPINE DVD
player only when AUX1 (source
1) is set to DVD.
REMOTE OUT 1
White/Brown
Corresponds to AUX1. To
control ALPINE DVD player, TV
tuner or DVD-HU, connect to
each REMOTE IN.
REMOTE OUT 2
White/Brown
Corresponds to AUX2. To
control ALPINE DVD player, TV
tuner or DVD-HU, connect to
each REMOTE IN.
REMOTE IN
1. ACC
Red
2. GND
Black
3. POWER CONTROL
Blue/White
4. REMOTE IN
White/Brown
5. REMOTE OUT 1
White/Brown
6. REMOTE OUT 2
White/Brown
White/Brown
To control ALPINE DVD player,
TV tuner or DVD-HU from LCD
monitor in the front area of the
vehicle, connect this line to the
ALPINE LCD monitor REMOTE
OUT.
15-EN
PKG-1000P_EN.indd EN15
5/17/2005 1:40:36 PM
Autogood products internet store http://130.com.ua
Dome Light Connection
Polarity +
When door open
Vehicle
Dome Light Wire
Door signal is 12V
Vehicle Door SW
Door Closed
Door Open
(Red)
Dome Light Wire
Door
(Green)
(Black)
This wire connects the built-in Dome Light to the cable
from the vehicle’s Dome Light Switch.
a
u
.
m
o
c
.
0
Game Port
Polarity –
To Slim Box
To Game Port To Micro SW
Micro SW
When door open
J3
J4
J1
Vehicle
Power PCB
J8
S2
ISP
S2
Door +
SW -
To Driver Board
3
1
Lamp
J13 CON
Door Open
Lamp PCB
Lamp SW
S1
Vehicle Door SW
Door Closed
J5
S1
Door signal is GND
(Red)
Door
(Green)
(Black)
S2
Door +
SW -
Lamp
J13 CON
Polarity change switch is located on the top surface
that mounts into the headliner.
Vehicle Door polarity depends on the vehicle type. The
polarity can be changed by the “Door SW polarity”
switch. (Default: Negative Switched System)
Polarity +: When door open, door signal is 12V
Polarity -: When door open, door signal is GND
16-EN
PKG-1000P_EN.indd EN16
5/17/2005 1:40:37 PM
Autogood products internet store http://130.com.ua
System Connections
ALPINE Mobile Multimedia Station
ALPINE Mobile Cinema Monitor
AUX IN
REM. OUT
REM. IN
REM. OUT 2
POWER CONT.
REM. OUT1
Camcorder
OR
a
u
.
m
o
c
.
0
AUX OUT
Game Player
AUX 2 IN
REM.
IN
REM. IN
3
1
ALPINE TV Tuner
AUX 1 IN
ACC
BATT.
GND
ALPINE DVD Player
GND
ACC
1. ACC
Red
2. GND
Black
3. POWER CONTROL
Blue/White
4. REMOTE IN
White/Brown
5. REMOTE OUT 1
White/Brown
6. REMOTE OUT 2
White/Brown
17-EN
PKG-1000P_EN.indd EN17
5/17/2005 1:40:40 PM
Autogood products internet store http://130.com.ua