Cisco Systems CP7945GRF Conference Phone User guide

Add to my manuals
22 Pages

advertisement

Cisco Systems CP7945GRF Conference Phone User guide | Manualzz

U

SER

G

UIDE

Cisco Unified IP Phones 7945G and 7965G for

Cisco Unified Communications Manager Express Version 7.1

1

Overview, page 2

2

Operating Your Phone, page 6

3

Phone Features Index, page 20

2

1

Overview

This guide provides phone operating instructions, and feature descriptions for the Cisco Unified IP Phone multiline models

7945G and 7965G. The 7945G has four lines and the 7965G has six lines.

Physical Description

17 1 2

16

3

4

5

6

7

8

9

15 14 13 12 11 10

Name Description

1

Line or speed-dial button Opens new line, speed-dials phone number, or ends call. Buttons light to indicate status:

Green, steady: Active call or two-way intercom call

2

Footstand adjustment

Display button

Green, flashing: Held call

Amber, steady: Privacy in use, one-way intercom call, DnD active.

Amber, flashing: Incoming call or reverting call

Red, steady: Remote line in use (shared line or BLF status)

Allows you to adjust angle of phone base.

Awakens the phone screen from sleep mode.

3

4

Messages button Provides access to message (voice mail) system.

5

Directories button

6

Help button

7

Settings button

Provides access to phone directories.

Activates the Help menu.

Provides access to phone settings such as display contrast and ring type.

Name (continued)

8

Services button

Description (continued)

Provides access to phone services.

9

Volume button Increases or decreases handset, headset, ringer, or speakerphone volume.

10

Speaker button

11

Mute button

Toggles speaker on and off.

Toggles mute on and off.

12

Headset button Toggles headset on and off.

13

4-way Navigation Pad and

Select (center) button

14

Keypad

15

Soft keys buttons

16

Handset with indicator light

17

LCD screen

Allows you to scroll through menus, highlight items, and display phone numbers from your Placed Calls when phone is on-hook. Use Select button to select an item that is highlighted on the screen.

Navigation button:

Scroll up and down to see menus and highlight items.

Scroll left to open the Details view and see directory numbers and features assigned to each line button (when on call screen).

Scroll right to close the Details view.

Select button: Scroll to select a line using the Navigation button, then:

If the button is mapped to a feature, press to access the feature.

If the button is mapped to a directory number, and:

The line is idle, press to initiate a new call.

There is an on-hold call on the line, press to resume the call.

There is an active call on the line, the Select button has no effect.

Functions as traditional telephone keypad.

Engages functions visible on corresponding LCD tabs.

Functions as traditional handset and provides message waiting indicator light and message-waiting (stutter) tone.

Displays information such as line/call status, phone number, and soft key tabs.

3

4

Connecting Your Phone

This section shows and describes the connectors on your Cisco Unified IP phone.

1

AUX 10/100 SW 10/100 PC

DC48V

3

2

5

4

2

3

4

6

7

8

1

5

DC adapter port (DC48V) for phones not provided with inline power

AC-to-DC power supply

AC power cord

Network port (10/100 SW) for connecting to the network

Access port (10/100 PC) for connecting your phone to your computer

Handset port

Headset port

Footstand button

6

7

Adjusting the Handset Rest

When you connect your phone, you can adjust the handset rest so that the receiver does not slip out of the cradle. To adjust the handset:

1.

Set the handset aside and pull the square plastic tab from the handset rest.

2.

Rotate the tab halfway.

3.

Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest.

1 2 3

5

2

Operating Your Phone

This section describes how to operate your Cisco Unified IP phone and includes information on soft keys and phone features.

Note

Because there are differences in phone and site configurations, not all features described here might apply to your phone. Consult your system administrator for more information.

6

Soft Key

<< or >>

Answer

Callback

Cancel

CFwdALL

Clear

Confrn

Delete

Dial

DnD

Down

EditDial

EndCall

Exit

Flash

GPickUp

Hold

LiveRcd

Login

Mobility more

NewCall

Ok

Soft Key Descriptions

Your Cisco Unified IP phone is equipped with soft keys for call features and options. Soft keys are displayed along the bottom of the LCD screen and activated using the corresponding buttons. Soft keys can change according to the state of the phone.

Following is a comprehensive list of soft keys offered on these Cisco Unified IP phones. Functions depend on your system configuration.

Function

Navigates to edit characters. Use the backspace soft key to erase digits that you entered incorrectly.

Answers an incoming call.

Notifies callers that the called line is free.

Cancels the last selection.

Forwards all calls.

Clears directory history.

Connects callers to a conference call.

Deletes the selected number.

Dials the displayed number.

Enables the Do-Not-Disturb feature.

Decreases the LCD screen contrast.

Selects a number and activates the cursor for editing.

Ends the current call.

Exits from the current selection.

Provides hookflash functionality for three-way calling and call waiting services provided by the PSTN or Centrex service.

Selectively picks up calls coming into a phone number that is a member of a pickup group.

Places an active call on hold. Resumes call on hold.

Enables the user to record a phone conversation.

Provides PIN-controlled access to restricted phone features. Contact your system administrator for instructions.

Allows the user to send a call to a mobile phone.

Scrolls through additional soft key options (for example, use the more soft key to locate the DnD soft key).

Opens a new line on the speakerphone to place a call.

Confirms the selection.

Soft Key

Park

PickUp

Play

Redial

RmLstC

Resume

Save

Search

Select

Trnsfer

TrnsfVM

Up

Function

Forwards calls to a location from which calls can be retrieved by anyone in the system.

Selectively picks up calls coming into another extension.

Plays ring sound sample.

Redials last number dialed.

Removes last participant from the conference call.

Returns to active call.

Saves last change.

Initiates a search in local directory.

Selects the highlighted option.

Transfers active calls to another extension.

Transfers a call to voice mail.

Increases LCD screen contrast.

Place a Call

Use one of the following methods to place a call:

Lift the handset and dial the number.

Dial the number, and then lift the handset.

Dial the number, and then press the Dial soft key.

Press the line button for your extension, and then dial.

Press the Speaker button, and then dial.

Press the New Call soft key, and then dial.

If you are using a headset, press the Headset button, and then dial.

Dial the number, and then press the Headset button.

If you have established speed-dial numbers, press a speed-dial button.

If you have selected a number from a directory, press the Dial soft key.

Note

Use the backspace (<<) soft key to erase digits that you enter incorrectly.

Answer a Call

To answer a call:

Lift the handset.

If you are using a headset, press the Headset button. If necessary, press the line button to select between incoming calls.

If you are using the speakerphone, press the Answer soft key or the Speaker button.

End a Call

To end a call:

Hang up the handset.

If you are using a headset, press the Headset button or the EndCall soft key.

If you are using a speakerphone, press the Speaker button or the EndCall soft key.

7

8

Redial a Number

To redial the most recently dialed number:

Lift the handset and press the Redial soft key.

Press the Redial soft key to dial using the speakerphone.

Hold a Call

To place a call on hold while on the call:

Press the Hold soft key.

To retrieve a held call:

Press the Resume soft key.

If multiple calls are on hold, use the Navigation button to select the desired call before you press Resume.

If multiple calls on multiple lines are on hold, press the line button for the line that you want to pick up. The active call on the other line is automatically put on hold.

Note

Because the hold feature can generate music or tones, avoid using hold when dialed into a remote conference system.

Conferences that are created locally on your phone can safely be placed on hold without introducing music or tones into the conference.

Mute a Call

To mute a call:

While on a call, press the Mute button. The Mute button lights, indicating that the other party cannot hear you.

To deactivate the mute function, do one of the following:

Press the Mute button again.

Lift the handset if you are using mute with your speakerphone.

Note

The Mute feature does not generate music or a tone.

Manage Call Waiting

If you are on a call when a second call comes in, you hear a call-waiting tone or see a flashing indicator light on the handset rest, depending on the configuration of your phone.

To answer the new call on the same line:

1.

Use the Navigation button to select the call

2.

Press the Answer soft key to answer the call. The call on the other line is automatically put on hold.

To return to the original call:

1.

Use the Navigation button to reselect the call.

2.

Press the Resume soft key to reconnect to the call.

For calls on a separate line:

Press the Line button for the incoming call. The call on the other line is automatically put on hold.

To return to the original call:

Press the Line button associated with the original call.

Retrieve Voice Messages

To retrieve voice messages:

1.

Select an available Cisco Unified IP phone line by lifting the handset, pressing the speakerphone button, or pressing a line button. Listen for the dial tone.

2.

Press the Messages button, and follow the voice instructions.

Note

When you have one or more new messages, the message-waiting indicator (MWI) on your handset is lit. The MWI works only if the MWI is configured on your phone.

Note

Your company determines the voice message service that your phone system uses. For the most accurate and detailed information, see the documentation for voice message service.

Adjust the Volume for the Current Call

To adjust the handset, speakerphone, or headset volume for the current call:

1.

During a call, press the Up or Down Volume button.

2.

Press the Save soft key to apply the new volume level to future calls.

Adjust the Ring Volume

Press the Up or Down Volume button while the handset is in its cradle and the phone is idle.

Select the Ring Type

To change the ringer sound:

1.

Press the Settings button.

2.

Press 2 for Ring Type, or use the Navigation button to scroll to Ring Type and press the Select soft key.

3.

Use the Navigation button to scroll through the list of ring types. Press the Play soft key to hear samples.

4.

Highlight the ring you want, and then press the Select soft key.

5.

Press the Ok soft key to select your setting.

6.

Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.

7.

Press the Exit soft key to go to the main directory menu.

Adjust the Display Contrast

To adjust the contrast in your LCD display:

1.

Press the Settings button.

2.

Press 1 for Contrast, or use the Select soft key.

3.

Use the Down or Up soft key to change the contrast.

4.

Press the Ok soft key

5.

Press the Save or Exit soft key.

6.

Press the Ok soft key to select your contrast setting.

7.

Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.

8.

Press the Exit soft key to go to the main directory menu.

Note

In the following procedures, you might need to enter information using the keypad. Press the backspace (<<) soft key to erase digits that you enter incorrectly.

9

Forward Incoming Calls

To forward any incoming call to the call-forward destination, for example voice mail, preset on the Cisco Unified IP phone:

Press the DnD soft key.

Note

If the call-forward destination is not set, pressing the DnD soft key disables the ringer.

Call-Blocking (Toll Bar) Override

Call blocking prevents unauthorized use of phones. It is implemented by matching a pattern of specified digits during a specified time of day and day of week or date. The call-blocking override feature allows individual phone users to override the predefined call blocking.

Note

Contact your system administrator for your personal identification number (PIN).

To place calls when call-blocking is enabled:

1.

Press the Login soft key on the Cisco Unified IP phone.

2.

Enter the Personal Identification Number (PIN) that is associated with the phone.

Transfer a Call

To transfer a selected call to another number, you can use blind transfer or consultative transfer:

Blind Transfer

Immediately redirects the call without allowing you to speak to the transfer recipient (the person to whom you are transferring the call).

To make a blind transfer call:

1.

During a call, press the Trnsfer soft key. The call is placed on hold.

2.

Dial the number to which you want to transfer the call.

Consultative Transfer

Redirects the call after first allowing you to speak to the transfer recipient.

To make a consultative transfer:

1.

During a call, press the Trnsfer soft key. The call is placed on hold.

2.

Dial the number to which you want to transfer the call.

3.

Wait for the call to be answered. Speak to the transfer recipient. Then press the Trnsfer button or hang up the handset.

4.

If the transfer fails, press the Resume soft key to return to the original call.

Cancel Transfer

1.

To cancel your consult call-transfer attempt:

Press the EndCall soft key.

2.

To reconnect to the original caller:

Press the Resume soft key.

Transfer to Voice Mail

1.

Press TrnsfVM.

2.

Enter the recipient’s extension number and press TrnsfVM again.

10

Forward All Calls

To forward all incoming calls to another number:

1.

Press the CFwdALL soft key. You hear a confirmation beep.

2.

Dial the number to which you want to forward all your calls. Dial the number exactly as if you were placing a call to that number. Remember to include locally required prefix numbers.

The phone display is updated to show that calls will be forwarded.

3.

Press the pound key (#) or the EndCall soft key.

Note

To forward calls to voice mail, manually enter the voice mail number, or use the CFwdALL soft key plus the Messages button, followed by the EndCall soft key. When call forward all is set, the display shows the Call Forward Icon.

To forward calls to a speed-dial number, use the CFwdALL soft key plus a speed-dial button, followed by the EndCall soft key.

To cancel call forwarding:

Press the CFwdALL soft key.

Place and Establish a Conference Call

To create a three-party conference call:

1.

During a call, press the more soft key and then the Confrn soft key to open a new line and put the first party on hold.

2.

Place a call to another number.

3.

When the call connects, press Confrn again to add the new party to the call.

To establish a conference call between two- and three-party calls to a Cisco Unified IP phone, one active and the other on hold:

Press the Confrn soft key on the Cisco Unified IP phone.

To establish a conference call between second- and third-party calls already present on a Cisco Unified IP phone, using separate line buttons, one active and the other on hold:

1.

Press the Confrn soft key on the Cisco Unified IP phone.

2.

Press the Line button of the call you want to add to the conference.

Note

Your system administrator must have configured the system for three-party or eight-party ad-hoc conferences.

Place a MeetMe Conference Call

To place a MeetMe conference call:

1.

Obtain a MeetMe conference number from your system administrator

2.

Distribute the MeetMe conference number to all the participants.

3.

Go offhook, press the MeetMe soft key, and dial the MeetMe conference number. All other participants join the meeting by dialing into the MeetMe conference number.

To end the MeetMe conference call, all participants must hang up the handset or press the EndCall soft key.

End a Conference Call

To end the conference call:

Hang up the handset, or press the EndCall soft key.

Note

Depending on the configuration when the conference call initiator disconnects, the conference call terminates.

11

Alternate Methods to End a Conference Call

Call initiators can one of the following methods (functionality will vary according to your system configuration):

To end the conference and remain connected to the most recent call, press the Confrn soft key. The older call is placed on hold.

To disconnect from the conference, hang up the handset. The other parties remain on the conference call.

Live Record a Call

Call initiators can use the LiveRcd soft key to record an active call, private line or conference call. To record a call:

1.

Press the LiveRcd. This puts the other party on-hold and initiates a call to the configured live record number.

2.

Press the LiveRcd again to stop the recording.

Join a Shared-Line Call (SCCP)

User can join a call on a shared line using the cBarge softkey.

To join the shared-line calls:

1.

Highlight the remote-in-use call that you want to join.

2.

Press the more to navigate to cBarge and press cBarge.

Join a Shared Line Call (SIP)

User can join a non-private call on a shared line call by using either Barge or cBarge soft keys.

Barge allows you to add yourself to the call by hosting the conference on your phone and does not allow others to join the conference.

cBarge allows you to add yourself to the conference and allows others to join the conference.

To join a shared line call:

1.

Highlight the remote-in-use call that you want to join.

2.

Press Barge or cBarge to join the call.

Tips

When you Barge a call, other parties hear a beep announcing your presence. You are disconnected from a call that you have joined using Barge if the call is put on hold, transferred, or turned into a conference call by the Barge initiator.

If a phone that is using the shared line has Privacy enabled, call information and Barge/cBarge soft keys do not appear on the other phones that share the line.

Hold a Shared-Line Call (SIP)

User can put calls on a shared line on hold like calls on a non shared line.

To place a call on hold while on a shared-line call:

Highlight the call that you want to put on hold.

Press the Hold soft key.

Resume a Shared Line Call (SIP)

User can resume a non-private call placed on hold on a shared line call.

To resume a shared line call:

1.

Highlight the call that you want to resume.

2.

Press Resume to resume the call.

12

Tip

When a shared-line call is placed on hold, a flashing green shared line button notifies all the other phones with the shared-line directory number that the call can be resumed.

Enable Privacy on Shared-Line

Users can prevent others from viewing, barging or resuming a Shared-Line Call by enabling the privacy feature on the phone.

To prevent other from viewing or barging calls:

1.

Press the privacy line button .

2.

The private icon next to an amber line button verifies that privacy is on.

3.

Press privacy button again to disable privacy.

Tips

The privacy button is not displayed on the shared-line phone by default. Your system administrator must enable privacy button on a per phone basis.

Privacy is enabled by default for shared-lines. Your system administrator can change the default privacy setting globally or on a per phone basis.

Calls placed on hold with privacy enabled have privacy disabled by default. Your system administrator can change the default privacy on hold setting globally.

Place a Call from Your Local Directory

To access the local phone directory established by the system administrator:

1.

Press the Directories button.

2.

Press the Navigation Up or Down button or press 4 to select the Local Directory.

3.

Press the Navigation Up or Down button to select the Last, First, or Number field search option.

4.

Using the keypad, enter the last name or first name for the entry.

When entering letters, select the appropriate number key of the letter you want, and press that key a number of times that equals the position of the target letter. For example, to enter a B, press the 2 key two times, and to enter a C, press the 2 key three times. Use the backspace (<<) soft key to make corrections while entering data.

5.

Press the Search soft key to find your selection.

6.

If your search results in multiple listings, use the Navigation Up or Down button to select the correct number.

7.

Press the Dial soft key to dial the selected number.

Program Personal Speed-Dial Buttons

After an administrator defines one or more speed-dial instances for a Cisco Unified IP phone, you can reprogram numbers that are not locked or program numbers into an instance that has an empty dial string:

1.

Select an available phone line by lifting the handset, pressing the NewCall soft key, or pressing a line button. Listen for the dial tone.

2.

Press the pound key (#).

3.

Press the speed-dial button that you want to program. A short beep confirms that you are starting to program this button.

4.

Enter the speed-dial number. The digits appear on the phone display. When you are entering speed-dial numbers, use the backspace (<<) soft key to erase digits that you enter incorrectly.

To remove a speed-dial number without replacing it with a new one.

1.

Press the pound key (#).

2.

Press the same speed-dial button a second time to indicate that you are done entering the speed-dial digits and to store the new speed-dial number.

13

3.

Hang up the handset, or press a new speed-dial button and repeat this procedure.

Place a Call from Your System Speed-Dial Directory

To place a call from your system speed-dial directory:

1.

Select an available Cisco Unified IP phone line (off hook or NewCall) and get a dial tone.

2.

Press the Directories button, or use the Navigation button to locate the Directory and then press the Select soft key.

3.

Use the Navigation button to scroll through the options. Use the Select soft key to select speed-dial options.

Press 5 for the Local Speed Dial.

Press 6 for the Personal Speed Dial (functionality varies depending on your system configuration).

4.

Use the Navigation button to scroll through the speed-dial phone list.

5.

To dial the selected phone number, either press the Select soft key or enter the number on the keypad.

6.

Press the Exit soft key to go to the directory menu.

View Call History

To view recent missed, received, or placed calls:

1.

Press the Directories button.

2.

Use the Navigation button to scroll and select the desired call list. Press the Select soft key, or:

Press 1 on the keypad for Missed Calls.

Press 2 on the keypad for Received Calls.

Press 3 on the keypad for Placed Calls.

3.

Press the Exit soft key to return to the previous directory menu.

Place a Call from Call History

To place a call to a number in the call history list:

1.

Use the Navigation button to scroll through the call history list.

2.

Use the Select soft key to select a phone number. The digits appear on the phone display.

3.

To dial the number as it appears on the phone display:

Press the Dial soft key.

To edit the number on the phone display before dialing:

1.

Press the EditDial soft key to place the cursor at the beginning of the number on the phone display.

2.

Use the keypad to edit the digits as needed. Use the backspace (<<) soft key to erase digits that you enter incorrectly.

3.

Press the Dial soft key to place the call.

Clear Call History

To clear all numbers in the directory histories:

Press the Clear soft key.

Note

The Clear soft key clears all call history lists. Selective clearing of call history lists is not supported.

Use the Intercom Feature

Cisco Unified Communications Manager Express supports intercom functionality for one-way and press-to-answer voice connections using a dedicated pair of intercoms on two phones that speed-dial each other.

14

To use the intercom feature:

1.

Press the Speaker button and get the dial tone.

2.

Press the speed dial key or dial the directory number to start the intercom call.

Note

The called Cisco Unified IP phone automatically answers the call in speakerphone mode with mute activated or deactivated depending on the configuration. The phone beeps to alert the recipient to the incoming call.

To respond to an intercom call:

If Mute key is lighted, Press the Mute button, or lift the handset.

If Mute key is not lighted, reply to caller handsfree.

Activate Do Not Disturb (SCCP)

For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal call-forward-busy and no-answer treatment.

To activate the Do-Not-Disturb feature:

1.

Press the more soft key to locate the DnD soft key.

2.

Press the DnD soft key. A text message displays to indicate that the phone is in Do-Not-Disturb mode.

Note

Pressing the DnD soft key immediately forwards the call to the call-forward destination set on the phone. If the call-forward destination is not set, pressing the DnD soft key disables the ringer.

To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2.

Activate Do Not Disturb (SIP)

For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal call-forward-busy and no-answer treatment.

To activate the Do-Not-Disturb feature:

1.

Press the more soft key to locate the DnD soft key.

2.

Press the DnD soft key. A text message displays to indicate that the phone is in Do-Not-Disturb mode.

To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2 in idle state.

Place a Call Using Your Cisco Extension Mobility Profile

Cisco Extension Mobility (EM) allows the user to temporarily configure a Cisco Unified IP phone to function as user’s own phone. After the user is logged-in to Cisco EM, the phone adopts the user’s profile, including the line buttons, features, and established services.

To log-in to Cisco Extension Mobility:

1.

Press Services button and select Extension Mobility.

2.

Enter your user ID and password.

3.

Press Submit. The phone will temporarily configure user profile and settings.

Note

Your administrator must configure Extension Mobility for you.

Place a Call from Your Personal Speed-Dial

To place a call from your Personal Speed-Dial using My Phone Apps:

1.

Log-in to Extension Mobility.

15

2.

Select My Phone Apps and scroll down to Personal Speed Dial.

3.

Select Personal Speed Dial

4.

Add a Label and Number

5.

Go back to My Phone Apps and press Reset Phone. You Personal Speed-Dial number will appear on the phone display screen.

Switching an In-Progress Call to Another Phone Using SNR

The Single Number Reach (SNR) feature allows you to switch an in-progress call on your desktop phone to your remote destination phone, such as a mobile phone. You can pick up an in-progress call on the desktop phone or remote destination phone without losing the call. All unanswered calls are forwarded to your voice mail.

Note

Your system administrator must configure this feature for your IP Phone. Contact your system administrator for more information.

Switch an in-progress Call from Your Desktop Phone to Your Remote Destination Phone

To switch an in-progress call on your desktop phone to your remote destination phone:

1.

Press the Mobility soft key.

2.

Select Send Call to Mobile Phone.

3.

Answer the in-progress call on your remote destination phone.

The desktop phone line button turns red and handset icons and the calling party number appear on the phone display. You cannot use same phone line for any other calls, but if your desk phone supports multiple lines, you can use another line to make or receive calls.

Switch an in-progress Call from a Remote Destination Phone to Your Desktop Phone

1.

Press Resume on your desk phone and start talking on your desk phone.

2.

Hang up the call on your remote phone to disconnect the phone.

Change Your Remote Destination Phone Number

You can replace the existing remote destination phone number with a new phone number.

To change the existing remote destination phone number:

1.

Press Services button and select My Phone Apps.

2.

Select Single Number Reach.

3.

Use << soft key to type your new remote destination phone number. Make sure you add the appropriate dialing prefix or access code (if applicable) to your remote destination number.

4.

Press Submit.

Enable or Disable Single Number Reach

You can enable or disable Single Number Reach (SNR) on your phone by using the Mobility soft key.

To disable SNR, press Mobility soft key and select Disable Mobile Connect.

To enable SNR, press Mobility soft key and select Mobile Connect On.

16

Whisper Intercom

The Whisper Intercom feature allows the user to make an intercom call to a busy extension. The recipient can hear the caller or hear the whisper intercom, and the original caller on the receiving phone does not hear the whisper intercom. The phone receiving a whisper intercom displays the extension and name of the party initiating the whisper intercom and a zipzip tone is played before the called party hears the caller's voice. The receiving party must select the intercom line button on their phone to speak to the caller.

Note

For intercom users to know whether the intercom is using one-way or two-way audio, the lamp for both intercom buttons are colored amber for one-way whisper intercom and green for two-way audio.

To place an intercom call:

Dial the intercom directory number from your intercom line. The intercom recipient hears the intercom caller audio without answering the call.

To answer an intercom call:

Press the intercom button to talk to the intercom caller.

To end a whisper intercom call:

Press Endcall.

Place a Priority (Precedence) Call

In some specialized environments, such as military or government offices, you might need to make and receive urgent or critical calls. If you have the need for this specialized call handling, your system administrator can add Multilevel Precedence and

Preemption (MLPP) to your phone.

Keep these terms in mind:

Precedence indicates the priority associated with a call.

Preemption is the process of ending an existing, lower priority call while accepting a higher priority call that is sent to your phone.

Priority level of an MLPP call

To see the priority level of an MLPP call, look for an MLPP icon on your phone screen:

Priority Call

Medium priority (immediate) call

High priority (flash) call

Highest priority (flash override) or executive override call

Higher priority calls are displayed at the top of your call list. If you do not see an MLPP icon, the priority level of the call is normal (routine).

Note

Contact your system administrator for a list of corresponding precedence numbers for calls.

To Make a Priority (Precedence) Call:

Enter the MLPP access number (provided by your system administrator) followed by the Precedence level (0-4) and the phone number.

Note

If you enter an invalid MLPP access number, a verbal announcement alerts you of the error.

17

To Answer an MLPP Call:

End an active call (if necessary) and answer the MLPP call.

If the active call has lower precedence than the incoming call, the active call is preempted.

Tips

When you are receiving a priority (precedence) call, an MLPP icon on your phone screen indicates the priority level of the call.

When you make or receive an MLPP-enabled call, you hear special ring tones and call-waiting tones that differ from the standard tones.

When you or the other party are receiving a call that must preempt the current call, disconnect immediately to allow the higher priority call to ring through.

When you have more than 1 active call, the call with the lowest precedence will be preempted. Similarly, for outgoing calls, the call with lower precedence will be preempted first.

Park a Call (SCCP)

Call park allows a user to place a call on hold at a designated parking slot from which the call can be retrieved by anyone on the system.

Note

Contact your system administrator for your call park slot number.

To park a call:

Press the Park soft key.

The Cisco Unified Communications Manager Express system automatically selects an available call park slot and displays the number on the Cisco Unified IP phone screen.

To park a call to a specific call park slot:

Press the Transfer softkey followed by the call park slot number provided by your administrator.

To retrieve a parked call:

If your phone receives a call park notification, press the PickUp soft key followed by the asterisk (*).

Press the PickUp soft key followed by the call park slot number.

Park a Call (SIP)

Call park allows a user to place a call on hold at a designated parking slot from which the call can be retrieved by anyone on the system.

Note

Contact your system administrator for your call park slot number.

To park a call:

Press the Park soft key.

The Cisco Unified Communications Manager Express system automatically selects an available call park slot and displays the number on the Cisco Unified IP phone screen.

To retrieve a parked call:

Dial the park slot extension.

To park a call to a directed call park slot:

Press the Transfer softkey followed by the call park slot number provided by your system administrator.

To retrieve a call parked at a directed call park slot:

Dial the retrieval park-slot extension.

18

Pick Up Calls

To pick up a call that is on hold or a call that is ringing at another extension:

1.

Press the PickUp soft key.

2.

Dial the extension number of the Cisco Unified IP phone that you want to pick up. Control of the call is transferred to your phone.

To selectively pick up a call ringing at a number that belongs to a pickup group:

Press the GPickUp soft key. If only one pickup group is defined in the entire Cisco Unified Communications Manager

Express system, control of the call is transferred to your phone.

If the ringing telephone and your phone are in the same pickup group, press the asterisk (*) to transfer control of the call to your phone.

If the ringing telephone and your phone are in different pickup groups, dial the pickup group number where the phone is ringing to transfer control of the call to your phone.

19

20

3

Phone Features Index

This section provides an alphabetical list of features for your Cisco Unified IP phone. Features supported in both SIP and SCCP protocols are marked as “Supported” and features not supported in either one of the protocols are marked as “Not Supported.”

However, there are differences in how the feature works based on the call protocol.

Table 1 Features (with page number references) Supported in SIP and SCCP Protocols.

Features

Activate Do Not Disturb 15

Adjust the Display Contrast 9

Adjust the Ring Volume 9

Adjust the Volume for the Current Call 9

Answer a Call 7

Call-Blocking (Toll Bar) Override 10

Cancel Transfer 10

Clear Call History 14

Enable Privacy on Shared-Line 13

End a Call 7

End a Conference Call 11

Forward All Calls 11

Forward Incoming Calls 10

Hold a Call 8

Hold a Shared-Line Call (SIP) 12

Join a Shared Line Call 12

Live Record a Call 12

Manage Call Waiting 8

Mute a Call 8

Park a Call 18

Pick Up Calls 19

Place a Call 7

Place a Call from Call History 14

Place a Call from Your Local Directory 13

Place a Call from Your Personal Speed-Dial 15

Place a Call from Your System Speed-Dial Directory 14

Place a Call Using Your Cisco Extension Mobility Profile 15

Place a MeetMe Conference Call 11

Place a Priority (Precedence) Call 17

Place and Establish a Conference Call 11

Program Personal Speed-Dial Buttons 13

Place a Call Using Your Extension Mobility (EM) Profile 14

Redial a Number 8

Resume a Shared Line Call (for SIP) 12

Retrieve Voice Messages 9

Select the Ring Type 10

SIP SCCP

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported Supported

Not Supported Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Not Supported

Supported

Supported

Supported

Supported

Supported

Not Supported

Supported

Not Supported Supported

Supported Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Not Supported Supported

Supported Supported

Not Supported Supported

Not Supported Supported

Not Supported Supported

Supported Supported

Not Supported Supported

Not Supported Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Table 1 Features (with page number references) Supported in SIP and SCCP Protocols.

Features

Switching an In-Progress Call to Another Phone Using SNR 16

Transfer a Call 11

Use the Intercom Feature 14

View Call History 14

Whisper Intercom 15

SIP SCCP

Not Supported Supported

Supported Supported

Supported

Supported

Supported

Supported

Supported

Supported

21

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Asia Pacific Headquarters

Cisco Systems (USA) Pte. Ltd.

168 Robinson Road

#28-01 Capital Tower

Singapore 068912 www.cisco.com

Tel: +65 6317 7777

Fax: +65 6317 7799

Europe Headquarters

Cisco Systems International BV

Haarlerbergpark

Haarlerbergweg 13-19

1101 CH Amsterdam

The Netherlands www-europe.cisco.com

Tel: 31 0 800 020 0791

Fax: 31 0 20 357 1100

Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the

Cisco Website at www.cisco.com/go/offices.

Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)

© 2009 Cisco Systems, Inc. All rights reserved.

OL-16770-01

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement