advertisement
N EW A NEMOMETER
Wind speed sensor to be used in conjunction with SEAV electronic control units for sun blinds.
T ECHNICAL DATA
- Contact capacity: 200 mA 100VDC
- Contact closing (pulse): Once x revolution
- Connection cable:
- Connection cable length:
- Working temperature:
outdoor use 2 x 2.5 mm2
(AWG 12-26) 4 m Max.
-10
÷
60°C
- Packaging dimensions 240x185x110 mm
- Container PC UL94V-0 (IP54)
E XPLODED D IAGRAM OF M ECHANICAL P ARTS :
GB
C
ONNECTION
C
ABLE
I
NSTALLATION
:
1 Rev. 1.1 03/07
H ORIZONTAL A NEMOMETER I NSTALLATION :
V ERTICAL A NEMOMETER I NSTALLATION :
F
OR THE
I
NSTALLER
-
IMPORTANT
- The fixing of the connection cable must be secured using the cable clamp supplied
with the product.
- At the time of installation, the anemometer must be handled with care, making sure you have assembled
its components correctly.
- It is very important that you decide on the exact position of the device so that it is affected by the wind in the same way
as the sun blind.
- All operations requiring the opening of the casing (such as installation, programming and repair, etc.) must
be carried out by skilled staff only.
2 Rev. 1.1 03/07
advertisement
Related manuals
advertisement