Cardell Monitor Mount to Matrx Anesthesia Machines Applies to Models: Special Tools:

Add to my manuals
16 Pages

advertisement

Cardell Monitor Mount to Matrx Anesthesia Machines Applies to Models: Special Tools: | Manualzz

Cardell Monitor Mount to Matrx Anesthesia Machines

[8008-001, -002, 9A465001 thru 9A465006]

Applies to Models:

Cardell 9400 / 9500 / 8013

Models

Cardell MAX-12 Models

Special Tools:

5/16” Allen Wrench

Language of origin: English

intended Use:

To Mount a Cardell monitor to the Matrx Anesthesia machines and stand.

warning

Mobile mount is very stable when it is stationary and pushed on smooth surfaces. However, when the mobile mount is transported, it can become susceptible to tipping when it is pushed over a threshold or other similar obstruction. Failure to use care when navigating over thresholds, obstructions, or carpet could result in the mobile mount tipping and causing severe personal injury or damage to monitor and mobile mount. grasping the mobile mount at waist height or lower during movement will help stability during movement. To move, simply unplug the monitor power cord from the outlet receptacle, coil and hold power cord. Then grasp the monitor mount at waist height or lower to keep stable during movement.

VMS Plus Mount

Mobile Stand

Pole and Stud Mount

© 2011 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | midmark.com

1

Style A

003-2296-00 Rev. J (3/29/16)

adjustments

30°

20° adjustment nuts Underneath for Forward and

Backward Swivel on Mobile, Pole and Stud Mount adjustment

Setscrew for rotational resistance

2

9400 Monitor Shown

#10-24 x 1/2”

Screws

note

Prior to mounting plate, remove if any screws are already fastened to mounting holes.

#8-32 x 1/4” Screws

Back Plate

Step 1: Install mounting plate to monitor and set aside.

Note: Bolt directly into the bottom of monitor with Cardell Touch, 9500, and

MAX-12 models. Washers and screws included in parts bag.

Cardell Touch

M4 x .7 x 16 mm

Screws

Back Plate not required for

9500, MaX-12 and Cardell Touch

9500 Mount

MaX-12 Mount

M4 x .7 x 16 mm

Screws

& 1/4” Plain washer

3

M4 x .7 x 16 mm

Screws

& 1/4” Plain washer

Step 2: Install mount to anesthesia machine.

Stud Mount - recommended for use with Canis Major, VMS wall Mount, and

Chase Mount when anesthesia Machine and Monitor will be Mounted Together.

Use 3/4” (1.9 cm) Post Spacer with VMS and Monitor wall Mount

Combination instead of 2 3/4”

(6.99 cm) used with the VMS wall mount.

note - For VMS Plus installation OnLY

Use a minimum of two screws when mounting location doesn’t align with mounting holes.

Use four screws if mounting location allows.

1/4-20 x 5/8”

Screws

VMS Plus

1/4” x 3/4” & 1/4” x 1” washers

Provided in Parts Bag if Larger,

Outer Hole is required for Mounting

Extension Bar adjustment

Knob

Mobile Stand

Located in Small

Parts Bag

Pole Mount (1-3/4 Diameter)

- recommended for use with

VMS, VMC and VME2

5/16” allen wrench

Caution

Pole mounted accessories to be mounted opposite that of other accessories to maintain balance of

anesthesia machine. (Example: when coupled with mayo tray accessory.)

4

Step 3: Set monitor into receiver.

Caution

Incorrect installation of monitor could result in damaged equipment or injury.

Front Plate release Knob

Back Tab receiver Slot

To install...

A) Slide back tab into receiver slot.

B) Front plate snaps into receiver plate.

5

To Detach...

A) Pull knob to release.

B) Slide back tab out of receiver slot.

040-0250-97

21

002-1798-00

5

041-0250-01

20

4

040-0250-79

19

65952700

18

045-0001-159

17

62400318

16

057-1226-00

15

65936800

14

20122400

13

65928300

12

Serial numbers / Dates:

V1068237 thru V1230485

1

040-0250-17

2

029-5390-01

3

050-8312-00

4

002-1797-00

6

040-0010-47

7

052-0754-00-312

8

016-0076-07

9

9A475000

10

62908409

11

65928400

6

Mobile Stand

Item Description

1

2

3

4

1/4-20 x 1 1/4 Hex Socket Flat Head

Receiver Plate & Plunger Assembly

Plate Spacer

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

5

5

6

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

Screw (24 THD x 3/8”)

7

8

Coupler, Swivel / Tilt

DU Bearing, (500 ID x .594 OD x .875 Long)

Accessory Basket (includes bolts and nuts)

9 Roll Pin (.188 x 1 1/4”)

10 Caster

11 Base

12 Column Assembly

13 Knob, Stand

14 Mounting Stud, (15” Long)

15 Hex Nut, 5/8-18

16

Nylon 6/6 Washer, (1/2 (.530) ID x 1.25 OD x .09

Thick)

17 Washer, Flat, (1/4”)

18 Screw, Hex Socket, (1/4-20 x 5/8)

19 Nut Nylock Hex, (1/4-20 CD, ZN)

20 Hex Socket, Flat Head (1/4-20)

Qty.

2

1

1

1

1

4

2

1

1

1

1

1

1

1

1

1

1

1

4

1

1

040-0250-97

20

002-1798-00

5

4

041-0250-01

040-0250-79

19

18

65952700

17

045-0001-159

16

62400318

15

057-1226-00

14

65936800

13

20122400

12

65928300

11

Serial numbers / Dates:

V1230486 thru V1366386

1

040-0250-17

2

029-5390-01

3

050-8312-00

4

002-1797-00

6

040-0010-47

7

052-0754-00-312

8

016-0076-07

9

9A475000

6

10

65928400

6.1

Mobile Stand

Item Description

1 1/4-20 x 1 1/4 Hex Socket Flat Head

2

3

Receiver Plate & Plunger Assembly

Plate Spacer

4

5

6

7

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

Screw (24 THD x 3/8”)

Coupler, Swivel / Tilt

8 DU Bearing, (500 ID x .594 OD x .875 Long)

9 Accessory Basket (includes bolts and nuts)

10 Caster

11 Base

12 Column Assembly

13 Knob, Stand

14 Mounting Stud, (15” Long)

15 Hex Nut, 5/8-18

16

Nylon 6/6 Washer, (1/2 (.530) ID x 1.25 OD x .09

Thick)

17 Washer, Flat, (1/4”)

18 Screw, Hex Socket, (1/4-20 x 5/8)

19 Nut Nylock Hex, (1/4-20 CD, ZN)

20 Hex Socket, Flat Head (1/4-20)

Qty.

2

1

1

1

1

4

2

1

1

1

1

1

4

2

1

1

1

1

1

1

040-0250-97

23

4

041-0250-01

22

040-0250-79

21

65952700

20

016-1583-00

19

040-0008-47

18

016-0076-07

17

045-0001-159

16

045-0001-95

15

057-1357-00

14

65936800

13

20122400

12

65928300

11

Serial numbers / Dates:

V1366387 thru Present

6

1

040-0250-17

2

029-5390-01

3

050-8312-00

4

002-1797-00

5

002-1798-00

6

040-0010-47

7

045-0001-35

8

052-0808-00-312

9

9A475000

10

65928400

6.2

Mobile Stand

Item Description

1

2

3

4

1/4-20 x 1 1/4 Hex Socket Flat Head

Receiver Plate & Plunger Assembly

Plate Spacer

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

5

8

9

6

7

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

Screw (.190-24 THD x 3/8”)

Lock Washer (.190 INT BO)

Coupler, Swivel / Tilt

Accessory Basket (includes bolts and nuts)

10 Caster

11 Base

12 Column Assembly

13 Knob, Stand

14 Mounting Stud, (15” Long)

15 Washer (.500)

16

Nylon 6/6 Washer, (1/2 (.530) ID x 1.25 OD x .09

Thick)

17 DU Bearing, (500 ID x .594 OD x .875 Long)

18 Set Screw (0.164-32 X 0.312 HEX)

19 Slotted Bearing

20 Washer, Flat, (1/4”)

21 Screw, Hex Socket, (1/4-20 x 5/8)

22 Nut Nylock Hex, (1/4-20 CD, ZN)

23 Hex Socket, Flat Head (1/4-20)

Qty.

2

1

1

1

4

2

1

1

1

5

1

1

1

1

1

1

1

2

1

1

1

1

040-0250-97

19

1

040-0250-17

2

029-5390-01

002-1798-00

5

041-0250-01

18

040-0250-79

17

65952700

16

4

016-0076-07

15

029-5288-00

14

Serial numbers / Dates:

61602800

016-0076-11

12

040-0375-88

11

13

057-1233-00-312

10

042-0007-06

9

V1068237 thru V1366386

3

050-8312-00

4

002-1797-00

7

8

6

040-0010-47

052-0754-00-312

045-0001-159

7

Pole Mount

Item Description

1 1/4-20 x1 1/4 Hex Socket Flat Head

2

3

Receiver Plate & Plunger Assembly

Plate Spacer

4

5

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

6

7

8

9

Screw (24 THD x 3/8”)

Coupler, Swivel / Tilt

Nylon Flat Washer

E-Ring, .625

10 Pole Clamp (Includes two bolts)

11 Screw (3/8-16” x 3/4”)

12 Bushing

13

Nylon 6/6 Washer, 1/2 (.530) ID x 1.25 OD x .09

Thick

14 Swing Arm Assembly

15 Bushing

16 Washer, Flat, 1/4”

17 Screw, 1/4-20 x 5/8 Hex Socket

18 Nut Nylock Hex, 1/4-20 CD, ZN

19 1/4-20 Hex Socket, Flat Head

Qty.

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

4

2

1

1

040-0250-97

22

4

041-0250-01

21

040-0250-79

20

65952700

19

016-1583-00

18

040-0008-47

17

045-0001-159

16

029-5822-00

15

61602800

016-0076-11

13

14

040-0375-88

12

057-1233-00-312

11

042-0007-06

10

Serial numbers / Dates:

V1366387 thru Present

1

040-0250-17

2

029-5390-01

3

050-8312-00

4

002-1797-00

9

8

5

002-1798-00

6

040-0010-47

7

045-0001-35

052-0808-00-312

016-0076-07

7.1

Pole Mount

Item Description

1

2

3

4

1/4-20 x1 1/4 Hex Socket Flat Head

Receiver Plate & Plunger Assembly

Plate Spacer

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

5

6

7

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

Screw (.190-24 THD x 3/8”)

8

9

Lock Washer (.190 INT BO)

Coupler, Swivel / Tilt

Bushing

10 E-Ring, .625

11 Pole Clamp (Includes two bolts)

12 Screw (3/8-16” x 3/4”)

13 Bushing

14

Nylon 6/6 Washer, 1/2 (.530) ID x 1.25 OD x .09

Thick

15 Swing Arm Assembly

16 Nylon Flat Washer

17 Set-Screw (0.164-32 X 0.312 HEX)

18 Slotted Bearing

19 Washer, Flat, 1/4”

20 Screw, 1/4-20 x 5/8 Hex Socket

21 Nut Nylock Hex, 1/4-20 CD, ZN

22 1/4-20 Hex Socket, Flat Head

Qty.

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

4

2

040-0250-97

17

1

040-0250-17

2

029-5390-01

3

050-8312-00

4

002-1797-00

002-1798-00

5

4

041-0250-01

16

040-0250-79

65952700

15

14

016-0076-07

13

045-0001-159

12

Serial numbers / Dates:

V1068237 thru V1366386

10545500

10

6160280011

11

6

040-0010-47

7

052-0754-00-312

8

029-5289-00

9

016-0076-11

Stud Mount

Recommended for use with Canis Major, VMS Wall Mount, and

Chase Mount

Item Description

1 1/4-20 x 1 1/4 Hex Socket Flat Head

2

3

Receiver Plate & Plunger Assembly

Plate Spacer

4

5

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

6

7

8

9

Screw (24 THD x 3/8”)

Coupler, Swivel / Tilt

Swing Arm (includes item #9 Installed)

• Bushing

10 Spacer

11 Nylon Flat Washer

12

Nylon 6/6 Washer, 1/2 (.530) ID x 1.25 OD x .09

Thick

13 DU Bearing, .500 ID x .594 OD x .875 Long

14 Washer, Flat, 1/4”

15 Screw, 1/4-20 x 5/8 Hex Socket

16 Nut Nylock Hex, 1/4-20 CD, ZN

17 1/4-20 Hex Socket, Flat Head

Qty.

2

1

1

1

1

1

4

2

1

1

1

1

1

1

1

1

8

1

040-0250-17

040-0250-97

20

4

2

029-5390-01

3

050-8312-00

4

002-1797-00

041-0250-01

19

040-0250-79

65952700

040-0008-47

18

17

016-1583-00

16

15

016-0076-07

14

045-0001-159

13

Serial numbers / Dates:

V1366387 thru Present

10545500

10

61602800

12

5

002-1798-00

6

040-0010-47

7

045-0001-35

8

052-0808-00-312

9

029-5818-00

11

016-0076-11

Stud Mount

Recommended for use with Canis Major, VMS Wall Mount, and

Chase Mount

Item Description

1

2

3

4

1/4-20 x 1 1/4 Hex Socket Flat Head

Receiver Plate & Plunger Assembly

Plate Spacer

Tilt Block Assembly Kit: (includes item #5)

• Pivot Pin, Threaded, Tilt Block

• Pivot Pin, Tilt Block

5

8

9

6

7

• Tilt Block Screw Kit: (1/4-20 x 2 1/2)

• • Lock Adhesive (not shown)

Screw (.190-24 THD x 3/8”)

Lock Washer (.190 INT BO)

Coupler, Swivel / Tilt

Swing Arm (includes item #10 Installed)

10 • Bushing

11 Spacer

12 Nylon Flat Washer

13

Nylon 6/6 Washer, 1/2 (.530) ID x 1.25 OD x .09

Thick

14 DU Bearing, .500 ID x .594 OD x .875 Long

15 Set-Screw (0.164-32 X 0.312 HEX)

16 Slotted Bearing

17 Washer, Flat, 1/4”

18 Screw, 1/4-20 x 5/8 Hex Socket

19 Nut Nylock Hex, 1/4-20 CD, ZN

20 1/4-20 Hex Socket, Flat Head

Qty.

2

1

1

1

1

1

1

1

1

1

1

1

1

1

4

2

1

1

1

1

8.1

1

029-5390-00

040-0250-13

2

Serial numbers / Dates:

all

9

VMS Plus Mount

Item Description

1 Receiver Plate & Plunger Assembly

2 Screw, BUH .250-20x.625 CD/ZN

Qty.

1

4

[Revised: 6/26/14]

040-0006-111

8

016-1435-00

7

041-0006-03

6

1

029-5238-00

040-0008-78

13

042-0045-11

12

8

7

6

4

5

040-0010-27

11

Serial numbers / Dates:

all

2

029-5239-00

9

050-8264-00-312

10

050-8265-00

10

5

4

3

050-8263-00

Mounting Plate assemblies

Item Description

1

Monitor Mount Assembly (Max 12)

Includes items # 3 thru 8

2

3

4

5

6

Monitor Mount Assembly (9400 / 9500 / 8013)

Includes items # 4 thru 12

• Monitor Plate (Max 12)

7

8

• Washer, Refer to:

Parts Bag

• Screw, Refer to:

Parts Bag

• Nut, Hex Nylock # 6-32

• Rubber Foot, .75 Dia x 1 Lg

• Screw (#6-32-32 x 1.0)

9 • Adapter (back) Plate

10 • Monitor Plate (9400 / 9500 / 8013)

11 • Screw(10-24)

12 • Nutsert (10-24)

13 Screw

Qty.

1

1

1

1

4

4

3

3

4

1

4

4

4

1

9A475000

Serial numbers / Dates:

all

11

VA1677i

note:

May also order Accessory Basket 9A475001 for 1 1/2” diameter pole equiment.

Basket

Item Description

1

2

Accessory Basket (1.3/4” Dia Pole)

Fits on all Models in this manual

Not Shown - 9A475001 (1 1/2” Dia Pole)

Does not fit on models in this manual, may order for other equipment with 1 1/2” dia pole.

Qty.

1

1

BWR20390

BWR20407

3

5

040-0010-27

2

042-0112-01

4

040-0250-13

6

045-0001-161

7

040-0008-78

8

10

9

61602800

10545500

items #9 & #10 not included in

Parts Bag

Used on Stud

Mount Only where Used

Item # Part Number QTY

7

3

5

8

2

6

4

040-0008-78

040-0010-27

040-0250-13

042-0112-01

045-0001-161

BWR20390

BWR20407

4

1

1

4

3

4

4

9400

Base

X

X

9500

Base

X

X

MAX-12

Base

X

X

Serial numbers / Dates:

all

VMS

Plus

Mount

Cardell

Touch

X

X

X

X

12

1

029-5585-00

Parts Bag

Item Description

6

7

4

5

1

2

3

8

Parts Bag (includes items # 2 thru # 8)

• Flat Head Phillips, (#10-24 x 1/2”)

• Washer, (1/4”)

• Flat Head Phillips (M4 x .7 x 16 mm) CD/ZN

• Washer Fender, (1/4” bolt x 1” OD)

• Pan Head Phillips, (1/4-20 x 5/8”)

• Plain Washer, (1/4”)

• Pan Head Phillips Screw, (#8-32 x 1/4”)

Items #9 & #10 Comes With Stud Mount Only

9 Nylon Flat Washer

10 Post Spacer (3/4”)

Qty.

4

4

4

1

1

3

1

4

1

1

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement