3M 7000000931 Super 77™ 24 oz. Super Spray Adhesive Specification


Add to my manuals
2 Pages

advertisement

3M 7000000931 Super 77™ 24 oz. Super Spray Adhesive Specification | Manualzz

3

Super 77

TM

Multipurpose Spray Adhesive

Technical Data March 2012

______________________________________________________________________________

Product Description

A high tack, high coverage and fast drying adhesive.

________________________________________________________________________________________________________

Key Features

A high tack, high coverage fast drying, transparent adhesive for permanently attaching foils, carpeting, many lightweight foams, paper, cardboard, felt and cloth to painted or unpainted metals, wood, hardboard and other base materials.

It provides high initial "grab" with sufficient open time to allow for positioning of materials.

Low soak-in gives better looking and higher coverage bonds.

Soft, non-dimpling glue lines

________________________________________________________________________________________________________

Typical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Product

Base:

Solids Content - (by wt.):

3M™ Super 77™

Multipurpose Spray

Adhesive

Synthetic Elastomer

25%

3M™ Scotch-Weld TM

Super 77™ Cylinder

Spray Adhesive

Synthetic Elastomer

27%

3M™ Super 77™ Spray

Adhesive

Synthetic Elastomer

36%

Density (lbs/gal):

Viscosity (cps):

Color(s):

Volatile Organic Compounds

(VOC):

Hazardous Air Pollutants

(HAPS) % wt (calculated):

CARB Compliant:

SCAQMD 1168 Compliant:

GREENGUARD Indoor Air

Quality Certified®:

LEED® Eligible:

Coverage @ 1 gms /ft

2

per lb

(sqft):

Spray Pattern:

6.0

N/A

Translucent

51%

Yes

N/A

N/A

No

N/A

No

No No No

Yes

114 sqft

6.5

N/A

Translucent

548 g/L

No

124 sqft

6.5

200 - 5000

Translucent

504 g/L

No

168 sqft

Mist Mist Mist

Dry Time:

Bonding Range:

Shear Adhesion Failure Test -

SAFT

(1)

:

15 seconds – 1 minute

15 seconds – 15 minutes

15 seconds – 1 minute

15 seconds – 15 minutes

15 seconds – 1 minute

15 seconds – 15 minutes

150F 150F 150F

Flammable Solvent: Yes Yes Yes

Flammable Propellant: Yes Yes N/A

(1)

SAFT Shear Adhesion Failure Test with birch plywood, 1 inch overlap, 100 grams used, temperature start at 90F and ramped 10F every 10 mn. until complete failure.

________________________________________________________________________________________________________

Available Sizes

Container Size

24 Fl. Oz. (Net Wt. 16.75 oz)

3M Stock Number UPC Number

62-4977-4930-9 00-021200-21210-9

Large Cylinder – 29.3 lbs.

5 gallon pail – 32.5 lbs.

52 gallon drum – 338 lbs.

62-4979-8030-0 00-051115-25776-6

62-4458-8530-4 00-021200-43793-9

62-4458-9530-3 00-021200-43813-4

3

Super 77

TM

Multipurpose Spray Adhesive

______________________________________________________________________________

Storage Store product at 60 o

-80 o

F (16 o

-27 o

C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures may cause increased viscosity of a temporary nature. Rotate stock on a “first in-first out” basis.

________________________________________________________________________________________________________

Shelf Life When stored at the recommended conditions in original, unopened container, this product has a shelf life if 15 months from date of shipment.

________________________________________________________________________________________________________

Precautionary Information Refer to product label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.

________________________________________________________________________________________________________

Technical Information The technical information, recommendations and other statements contained in this document are based upon testes or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

________________________________________________________________________________________________________

Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

________________________________________________________________________________________________________

Warranty, Unless an additional warranty is specifically stated on the applicable 3M product packaging

Limited Remedy, and Disclaimer or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES

OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR

CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE

OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

________________________________________________________________________________________________________

Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

3

Industrial Adhesives and Tapes Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

800-362-3550 • 877-369-2923 (Fax) www.3M.com/industrial

3M, Super 77 and Scotch-Weld are a trademarks of 3M Company.

The GREENGUARD INDOOR AIR QUALITY

CERTIFIED Mark is a registered certification mark owned by Air Quality Sciences, Inc. and used under license through the Greenguard

Environmental Institute. LEED® is a registered trademark of the United States Green Building Council (USGBC).

©3M 2012

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement