- No category
advertisement
◉
Touch to zoom
Version 1.0 Transducer type: Operating principle: Polar pattern: Connection: Open circuit voltage at 1 kHz: Open circuit sensitivity: Frequency range: Level attenuation: Low-Cut filter: Max. SPL (1% THD @ 1 kHz): Equivalent SPL (IEC 268-4): Signal-to-noise ratio re 1 Pa: Nominal impedance: Load impedance: Supply voltage: Supply current: Dimensions: Weight: Polar pattern December 2001 condenser, 1" single diaphragm pressure gradient cardioid gold-plated balanced XLR connector -34 +/-2 dBV (0 dBV = 1 V/Pa) 20 mV/Pa 20 Hz - 20 kHz -10 dB (switchable) 6 dB/Octave at 75 Hz (switchable) 138 dB (0 dB), 148 dB (-10 dB) 13 dB-A 81 dB A-weighted 50 W > 1 kW +48 V 3 mA Æ: 58 mm, length: 174 mm 0,461 kg Frequency response BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. © 2001 BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30 www.behringer.com ENGLISH B-1 STUDIO CONDENSER MICROPHONE Technical Specifications
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project