GE 29484 2-Line Telephone User Manual

Telephone/FM=AM

Clock Radio

WARNING: TO

PREVENT FIRE OR

ELE~RIC SHOCK HA~RD, DO NOT

=POSE THIS PRODU~ ~ RAIN OR

MOISTURE.

TABLE OF CONTENTS

CONTROLS AND FEATURES . . . . . . . . . . . . . . . . . . . ...3

SET-UP OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . ...4

PULSWONE SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . ...5

MAKING AND RECEIVING CALLS . . . . . . . . . . . . . . . ...5

AUTOMATIC REDIALING . . . . . . . . . . . . . . . . . . . . . . . ...5

MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...5-6

●

Emergency Quick Dialing

●

Frequently Called Numbers

.

Other Storing Procedures

PAUSE FUNCTION . . . . . . . . . . . . . . . . . . . . . .. . . . . . ...6

PABXAND PBX USE . . . . . . . . . . . . . . . . . . . . . . . . . . ...6

CHAIN DIALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...7

BATTERY REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . ...7

REPLACEABLE TELEPHONE CORD . . . . . . . . . . . . . ...8

PRODUCT CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...8

TROUBLE OR MALFUNCTION.

. . . . . . . . . . . . . . . . . ...9

SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...9

IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . ...10

CLOCK RADIO CONTROLS AND FEATURES . . . . . ...11

OPERATING THE RADIO . . . . . . . . . . . . . . . . . . . . . . ...12

SETT;NG THE TIME . . . . . . . . . . . . . . . . . . . . . . . . . . ...12

SETTING THE WAKE TIME . . . . . . . . . . . . . . . . . . . . ...12

.

Wake to Alarm

●

Sleepto Music

●

Sleeo to Music and Wake to Music or Alarm

ADJUSTING THE DISPLAY BRIGHTNESS . . . . . . . . ...14

ANTENNAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...14

NO-WORRY BATTERY BACKUP SYSTEM . . . . . . . . . ...14

IN CASE OF DIFFICULTY . . . . . . . . . . . . . . . . . . . . . ...17

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...18

INTRODUCTION

Your Telephone/Clock Radio is a carefully engineered, highquality, durable product with natural sound quality, modern features and elegant styling. It is designed to give you the quality and convenience you expect in a telephone andaclwk radio.

To familiarize yourself with all its features, please read the following instructions carefully. Retain this Guide for future reference.

FCC NUMBERIS ~CATED ONTHE BOTTOM OFTE~PHONE HANOSET

REN NUMBER IS ~TED ON THE SOTTOM OF TE~PHONE HANOSET

OTHER IMPORTANT INFORMATIONON SACKCOVEROF THISGUIOE

TELEPHONE OUTLET REQUIREMENTS

w

A modular (Universal Service Order

Code) USOC: RJ1lC outlet jack

(illustrated) is required.

Installation of this telephone in Iotations with 4-prong jacks or with hardwired outlets will require additional

Gonveflers (not included). The dealer from whom~upurchas~ yourphone oratelephone supply storecanadvise you regarding the proper Converter.

2

,.,:

..

‘f

I

CONTROLS AND FEATURES

~ ,

EARPIECE

3 ONE-TOUCH

QUICK DIAL BUTTONS

MICROPHONE —

.

00000

—00000

00000

LITHIUM

BATERY cOMPARTMENT

CRADLE

....... .. .. . ..

.

.. .

For convenience, keep this page open while reading instructions

3

I

SEFUP OPERATION

A.

Plug coiled cord into the Handset Modular Jack.

B.

Plug telephone cord (on back of clock radio) into Modular

(RJ1lC) telephone outlet.

c.

Plug the power cord into an AC outlet.

D.

Set Ringer Switch to “HI”.

●

LO = sound will be lower.

●

OFF = telephone will not ring.

E. Set PULS~NE Switch to

~NE.

If dialing cannot be accomplished, switch to PULSE.

You are not ready to try your new telephone.

D

MODULAR

(RJIIC)

TELEPHONE

OUTLET AC OUTLET

4

.-

.

.

.

PULSE/TONE SWITCH

Enables your phone to work on both Touch-Tone and Pulse dialing systems.

Pulse Position - Compatible with most local telephone companies’ dialing systems.

Touch Tone - Provides tone signals required for some long distance and special tone-dialing service.

●

●

Generally, telephone companies charge extra for Tone service.

Not available in all localities.

●

If not available locally, phone will not work with switch in this position.

Pulse~one Combination Dialing - If a combination of both Pulse and Tone dialing is needed to reach your number or special phone service, switch to the required dialing mode at that point in your dialing sequence.

MAKING AND RECEIVING CALLS

To Make a Call:

1.

PICK-UP Handset.

2. Wait for DIAL TONE.

3. DIAL Phone Number.

4. When finished, HANG UP

To Receive A Call:

(Make sure Ringer Volume switch is not in “OFF” position.)

When phone rings:

1. PICK-UP Handset and TALK.

2. When finished HANG-UP

NOTE: Handset must be returned to cradle for radio play and alarm kyatam operation.

.

. . .

. .

AUTOMATIC REDIALING

The telephone automatically remembers the last number dialed (up to 16 digits long).

The number will remain in “REDIAU’ until another number is dialed.

1. To redial a number that you dialed manually, PRESS -].

2.

To redial a number that you dialed from Memory, use the Memory keys again.

5

MEMORY

;ach of the 12 MEMORY Locations is capable of storing a telephone lumber of up to 16 digits. The telephone number stored in the 3

:mergency/Quick Dial positions can be automatically dialed with one

Duch. MEMORY positions 1-9 are automatically dialed with two

Duches (MEMORY DIAL & number buttons corresponding to

AEMORY Location).

Ememency/Quick

STORING

Dial Numbem:

1. PICK-UP Handset.

2“ m

DIAL m Phone

Number

-

PRESS m:& w

3. HANG UP

&

4. WRITE reference for stored number in corresponding MEMOR’ location on the Directory Card.

~

CAUTION ~

MAKING TEST CALLS TO EMERGENCY NUMaERS:

1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

2. Pefiorm such activities in the off-peak hours, such as early morning hours or late evenings.

F@quently Called Numbem:

1. PICK-UP Handset.

4. WRITE reference for stored number in corresponding

Memory location on the Directory Card.

.

..

Emergency/Quick

1. PICK-UP Handset.

2. Wait for DIAL TONE

DIALING

Dial Numbem:

3. PRESS ~ or ~] or ~

Frequently called numbers (already in Memory):

1.

PICK UP Handset.

2. Wait for DIAL TONE.

3. PRESS I MEMORY DIAL] -

●

“m g ~:;;

Location

Number.

OTHER STORING PROCEDURES

Changing a Stored Number:

1.

PICK-UP Handset.

2. PRESS [~]

DIAL m ~~;ne

Number

3. HANG UP

●

-]

* ~

●

~

~ @ pRESS

~o;~t;~n

Number.

Correcting an Error While Storing:

1.

HANG UP

2. Repeat Procedure for Storing Numbers in Memory.

‘

PAUSE FUNCTION

Used for storing a momentary delay in the dialing sequence of a stored telephone number. This is generally used when a “PAUSE” is needed to wait for a dial tone (e.g. after dialing 9 for an outside line) or a computer tone (e.g. for some long distance sewices) before you can proceed to dial.

At point where pauae is required.

.,

PRESS [~j

NOTE:

●

●

The REDIAL key will place a pause in the dialing sequence anytime it is pressed after dialing a number. When storing

Pause in MEMORY, each pause counts as one stored digit.

PAUSE is pre-set for a short delay. If a longer PAUSE is required, press REDIAL again.

PABX AND PBX USE

Memory and Redial may require the use of a “PAUSE” when initially dialing or storing outside numbers. The sequence, then, for dialing or storing an outside number would be, for example:

6

CHAIN DIALING

Allows you to dial in succession a chain of numbers in different memory locations. This is handy when you must dial more than one number in memory to complete a call, such as with frequent calls via an independent long distance sewice. (e.g. MCI or SPRINT.

For Example:

Memory

Location

Local Access Number of Long Distance Service and two (or three) Pauses at end.

is in m

Authorization Code (ID Number).

is in m

Long Distance Phone Number you wish to call.

is in m

To Initiate Chain Dialing:

Dials # in

Dials # in Dials # in

Memory Location 7

Memory Location 8

Memory Location 9

REPLACEMENT

A consumer replaceable long-life Lithium Battery (3V) is installed in the phone to provide back-up power for retaining numbem in memory.

BATTERY REPLACEMENT (cont.)

To Replace Baffe~:

1.

UNPLUG telephone line from phone wall outlet.

2.

UNPLUG handset cord.

3.

Use pointed object to remove telephone number pldc cover, card and battery cover to expose battery holder.

4.

Using a small flat screwdriver, insert in opening at either end of battery holder and pop up.

5.

Slide battev holder out and dispose of immediately in the proper manner. (Do Not Touch

Battery).

6.

Insert replacement battev and holder. (Holder can be inserted only one way.) Snap into place.

7.

Replace battery cover, telephone number card, and plastic cover.

8.

PLUG teleDhone line cord into phone wali outlet.

9. Connect the coiled cord to the handset.

10. R-ram num% into~.

7

I

BATTERY REPLACEMENT

I

B8ttew Safety Precautions

For your safety, please follow these simple precautions:

●

Do not recharge, disassemble, mutilate, wet or dispose of

Battery in fire.

. tiep Battery out of reach of children.

●

Replace only with GE Cat. #5-2313. Accessory Order Form included in this guide.

REPLACEABLE TELEPHONE CORD

The telephone cord (from handset to telephone wall outlet) is actua

Iy one cord which is easily replaced if damaged.

To replace:

1.

Remove modular plug from telephone wall outlet and handse

2.

Remove screw from telephone cord strain relief housing locate on the bottom of the clock radio.

3.

Lift off housing and unwrap cord around the strain relief, as il dicated in the illustration, and replace housing and screw.

✠

PRODUCT CARE

To keep your GE Telephone working and looking good, follow these few simple rules:

●

Avoid putting lelephone new heating appliances or other high temperature sources.

●

Ty to avoid putting telephone near heating appliances and devices that generate ele~tical noise ~.e., motors, fluorescent lamps).

b

&

O

.

Clean telephone with a soft cloth dampened with water. (Remember to first unplug phone from wall outlet.)

Never use a strong cleaning agent or abrasiva powder, as this will damage the finish.

Retain the original pachging, should PU need to ahip the phone at a later date.

✎

Telephone should not be exposed to direti sunlight or moisture.

“

Awid dropping

the

Handset as well as other rough treatment to the phone.

I

~

TROUBLE OR MALFUNCTION

Should your phone not operate properly, check the following before seeking service.

1. No dial tone.

2. Phone does no ring.

3. Incoming and outgoing voice

4.

PROBLEM volume too low or none at all

Light and tone feedback flutter when dialing in

Pulse mode.

5. Memory Dialing

Problems

6. Loss of Memoo

●

●

SOLUTION

Check Cords: Are they inserted properly and securely?

Are they damaged?

Check HOOK SWITCH: Does it fully extend when Handset is removed?

●

●

●

Is RINGER VOLUME SWITCH in OFF position?

Are you using too many phones on one line?

me total REN of all phones on the same line should not be greater than the maximum REN for your calling area. Usually 5. See (“FCC

Registration Information” on back cover.)

Perform checks under #1.

. Are other phones off hmk at same time?

If so, this is normal condition as wlume drops when additional phones are used simultaneously.

●

This is normal as power is fluctuating when the phone dails.

●

Dld you program numbers correctly?

●

Did you follow proper diating sequence?

(Review Memory Section)

●

●

Is 3V Lithium Batte~ in place correctly?

Does it need to be replaced?

If still inoperative, disconnect the phone and try another phone Of one is available) or another cord to determine whather the problem is in the telephone, the cord or the line. If in the phone, discontinue its use and follow the SERVICE procedure in this manual. If in the line, notify the telephone company immediately. The telephone company will charge for a service call if the problem is attributable to equipment you own.

9

IMPORTANT INFORMATION

HEARING AID COMPATIBILITY

This telephone system is judged to be hearing aid compatible per

FCC/DOC standards.

FCC REGISTRATION INFORMATION

Your GE telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15J and

68, FCC Rules and Regulations.

1. Notification

to the Locai Teiephone Company

On the bottom of this equipment is a label indicating among other information, the FCC Registration number and Ringer Equivalence

Number (REN) for the equipment.

You must, upon request, provide this information to your telephone company.

The REN is useful to determine the number of devices you may connect to your telephone line and still have all these devices ring when your telephone number is called. In most (but not all) areas, the sum of the REN’s of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company.

NOTES: This equipment may not be used on coin service provided by the telephone company.

Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.

Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.

2. Rights of the Teiephone

Company.

Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue sewice immediately. In case of such tempora~ discontinuance, the telephone company must: (1) promptly notify you of such temporay discontinuance, (2) afford you the opportunity to correct the situation and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.

The telephone company may make changes in its communications facilities, equipment, operations of procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted sewice.

INTERFERENCE INFORMATION

This equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not pro perly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is ensured, although there is no guarantee this will not occur in a given installation. If interference is suspected and verified by switching this equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the radiohelevision receiver’s antenna, relocate the equipment with respect to the receiver, plug the equipment and receiver into separate circuit outlets. The user may also wish to consult a qualified radi~elevision technician for additional suggestions. This equipment has been fully tested and complies with all limits for Class B computing devices pursuant to part 15, Sub-part J, FCC Rules and

Regulations

10

CLOCK RADIO CONTROLS AND FEATURES

DIS~Y SET BU~NS

●

FAST FORWARD

●

FORWARD

●

R~ERSE

WA

R

.

CLOCK RADIO OPERATION

When AC power is interrupted (disconnected) for a shoti period, both time and alarm Stilngs will change (unless optional battery is installed). After AC power is restored (reconnected), the Digital Display will blink to indicate that power was interruptad and you may have to readjust the TIME and ALARM settings, To stop display from blinking, press any Display Set Button.

OPERATING THE RADIO

Plug the power cord into any 11OVAC household outlet. Display will blink. Press any DISPLAY SET button to stop the blinking.

Press RADIO ONIOFF button to turn radio on.

Slide the FM/AM band switch to desired broadcast band.

To adjust the clock to the desired time:

1.

Press and hold the TIME SET button.

2 While holding down the TIME SET button, press the FAST FOR-

WARD button to change time rapidly and, then, the FORWARD button as you approach the time you want.

To change time in the reverse direction, press the REVERSE button while holding down the TIME SET button.

3.

Release the TIME SET button.

Rotate TUNING knob to select a station.

Adjust VOLUME to your listening preference.

Press RADIO ONIOFF button to turn radio off.

SETTING THE WAKE TIME

You can select two different wake times for the radio or alarm to turn

Dn automatically.

WAKE 1

1.

Press and hold down the Wake 1 WAKE SET button. The display will change to wake time for WAKE 1.

2.

While holding down the WAKE SET button, press the FAST FOR-

WARD button to change time rapidly and, then, the FORWARD button as you approach the desired AM or PM wake time.

To change time in the reverse direction, press the REVERSE button while holding down the WAKE SET button,

3.

Release the WAKE SET button and the current time is once again displayed.

WAKE 2

SETTING THE TIME

1. Select desired AM or FM station (see “OPEMTING THE RADIO”),

The digital clock timer operatee on a 2+hour cycle. The PM indicator to the left of the time display will light when the clock is reading PM time. You can change time in either the fomard of the reverse direction.

12

2. Turn the radio off with the RADIO ON/OFF button.

3. Set the wake time (see “SETTING THE WAKE TIME”) using the

WAKE 1 or WAKE 2 WAKE SET button.

4. Slide the corresponding WAKE FUNCTION Selector to the MUSIC position. The WAKE SET Indicator will light in the display.

The radio will turn on at the wake time you have set and will turn itself off after approximately 1 hour. TOturn the radio off sooner, press

RADIO ON/OFF button. (This ends the wake cycle while leaving the wake system in place, ready to turn itself on again at the same time the next day. The WAKE SET Indicator will remain in the display.)

To turn off the wake system, slide the WAKE FUNCTION Selector to the OFF position. The WAKE SET Indicator will light in the display.

The radio is now on and you can select your station in the usual way.

Play will be for the chosen length of time (up to 59 minutes), and then the radio will turn itself off. If you decide to turn the radio off sooner, press the RADIO ON/OFF button.

SLEEP TO MUSIC AND

WAKE TO MUSIC OR ALARM

You can set your digital clock radio to lull you to sleep, turn itself off, then awaken you at a preset time — all automatically.

WAKE TO ALARM

1. Set the wake time (see, “SE~lNG THE WAKE TIME”) using the

WAKE 1 or WAKE 2 WAKE SET button.

2. Slide the corresponding WAKE FUNCTION seletior to the AURM position. The WAKE SET Indicator will light in the display.

An alarm tone will sound at the wake time you have set and will turn itself off after about 1 houc To turn the alarm off sooner, press RADIO

ON/OFF button or slide the WAKE FUNCTION Selector to the OFF position.

NOTE: The VOLUME Control setting determines the loudness of the alarm.

1. Set the wake time.

2. Follow the steps under WAKE TO MUSIC or WAKE TO ALARM.

3. Then, proceed with Steps 1 through 3 under SLEEP TO MUSIC.

(NOTE: Be sure the appropriate FUNCTION SELE~R position.) is in WAKE

SNOOZ-ALARM@ CONTROL OPERATION

The Snooz-Alarm control has three functions:

1.

It allows extra sleep time after the radio comes on in the WAKE

TO MUSIC mode. Press SNOOZ bar to silence the radio. About

7 minutes later, the radio will play again.

SLEEP TO MUSIC

You can drift off to sleep to music knowing that the radio will turn itself off automatically, Simply

2.

It allows extra sleep time in the WAKE TO ALARM mode. When the alarm sounds, touch the SNOOZ bar to silence the alarm.

About 7 minutes later, the alarm will sound again.

You can use the SNOOZ feature repeatedly for up to one hour, after which the radio or alarm will turn off until the next day.

1.

With the radio turned off, press and hold the SLEEP button. The time display will exhibit 0:59, and the radio will turn on automatically.

2.

Hold down the SLEEP button to select any sleep time between

59 minutes and 1 minute, depending on how long you wish the radio to play.

●

After pressing the SLEEP button, there is a delay of approximately 2 seconds before automatic countdown starts.

3.

Release the SLEEP button and current time is displayed.

once again

13

3.

The SNOOZ-AURM control can also be used to show seconds in the digital display. Simply press SNOOZ at any time other than during an active WAKE interval and the display will change from hours and minutes to minutes (O-9 only) and seconds. (Pressing

TIME SET and FORWARD while holding down SNOOZ button will advance display to the next whole minute.) Release SNOOZ button and hours and minutes are once again displayed.

ADJUSTING THE DISPLAY BRIGHTNESS

The light intensity of the digital display can be adjusted for day/nigh!

lighting conditions. With each press of the BRIGHTNESS switch, the brightness will toggle between high and low.

ANTENNAS

AM Antenna - A built-in ferrite rod antenna eliminates the need for an outside antenna for AM reception. Rotating the unit slightly may improve reception for distant AM stations.

FM Antenna - The power cord acts as your FM antenna. The power cord picks up moderate to strong stations and eliminates the need for an external antenna in most strong signal areas. For best reception, be sure the power cord is stretched out to its full length. Do not coil or bunch the cord together. Changing position of the power cord may improve reception.

NO-WORRY BATTERY BACKUP SYSTEM

The clock radio is equipped with a memory holding system that can be powered by a customer-installed 9 volt alkaline battery (not included). The power failure protection circuit will not operate unless a battery is installed.

When normal household power is interrupted, or AC line cord is unplugged, the battery will power the clock radio to maintain time and alarm settings. When on battery power, the digital display will not light. However, should WAKE TIME occur during the power interruption, the radio will operate or the alarm will sound if remaining battery power is adequate.

Normal operation will resume after AC power is restored so you will not have to reset time or alarm.

Install battery as follows:

1. To remove battey compartment door (located on bottom of radio), push the door latch in the direction of the arrow on the battery door and lift door off cabinet.

2. Connect a 9-volt batte~ to connectors.

3. Insert battery in compartment and replace compartment door.

NOTE: Alkaline batteries are recommended.

Carbon-zinc batteries may be used but memory holding time will be substantially reduced.

Memory holding time for a fresh alkaline battery is approximately 4 hours, which should take care of short, nuisancetype AC power failures. To preserve battery power, the unit should remain plugged into an AC outlet. Aa batteries get older, their voltage drops and memory may be lost. Be sure to replace the batte~ periodically and dispose of the “dead” batte~ in a proper manner, in accordance with your State and local regulations. Remove battery if the unit will be unplugged or stored for more than a few weeks. A leaky battery can damage the unit.

14

.

IN CASE OF DIFFICULTY

SERVICE

FCC requires this product be serviced only by the manufacturer or its authorized service agents. For instructions on how to obtain service, refer to the warranty included in this Guide or call Consumer

Information (309) 685-5563.

~ch your ~es receipt to the bklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period.

Purchase date

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is sub ject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Consumer Electronics could void the user’s authority to operate this product.

Name of store

15

,,,%

.

TWO-YEAR LIMITED WARRANTY

What

does your warranty covefl

.

Any defect in material or workmanship.

~r how long afier the original purchase?

●

Two years.

●

The warranty for rental units begins with the first rental.

What will we do?

●

Provide you with a new, or at our option, a reconditioned unit.

●

The exchange unit is warranted for the remainder of your product’s original two-year warrant y period.

How do you make a warranty claim?

●

Properly pack your unit. Include any cables, etc., which were

●

originally provided with the product. We recommend using the original carton and packing materials.

Include in the package a copy of the sales receipt or other evidence of date of original purchase. If the unit was a gift, provide a statement specifying the date received. Also print your name and address and a description of the defect.

o Ship the unit standard UPS or equivalent to:

Thomson Consumer Electronics, Inc.

Product Exchange Center

32 Spur Drive

El Paso, Texas ~906

●

●

Pay

any charges billed to you by the Exchange Center for service not covered by the warranty.

A new or reconditioned unit will be shipped to you prepaid freight.

●

What does your warranty not covefl

●

●

●

●

●

Customer instruction. Your Owner’s Manual provides information regarding operating instructions and user controls. %r additional information, ask your dealer.

Installation and set-up service adjustments.

Batteries.

Damage from misuse or neglect.

Product which have been modified or incorporated into other products.

Product purchased or serviced outside the USA.

How does state law relate to this warranty?

G This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

What if you purchased your unit in Canada?

●

Refer to the Canadian Warranty.

fir products purchased outside the United States and Canadar see dealer for warranty.

Thomson Consumer Electronics, Inc.

Print@ in U,S.A