Kawai CN33 Electronic Keyboard Owner`s manual

PART NAMES AND
FUNCTIONS
PLAYING THE
PIANO
2
CONCERT MAGIC
3
LESSON
FUNCTION
4
RECORDER
5
USB OPERATIONS
6
FUNCTION
BUTTONS
7
APPENDICES
Owner’s Manual
1
8
Page
3
Thank you for purchasing a KAWAI CN33 digital piano!
This instrument combines the latest digital technologies with traditional piano craftsmanship, delivering a truly breathtaking
musical experience for amateur and professional pianists alike. The CN33’s rich, expressive tone has been created through
the meticulous recording of KAWAI’s hand-built concert grand pianos, and reproduced using unique Progressive Harmonic
Imaging™ sound technology. While the Responsive Hammer action features a realistic weight-graded keyboard with Ivory
Touch surfaces and authentic Let-off mechanism to satisfy the demands of even the most discerning pianist.
The CN33 digital piano also features reverb and digital effects processors that create a richer, more authentic sound,
while the Lesson function helps budding performers to practice the piano using a selection of built-in etudes from Czerny
and Burgmüller, or songs from the popular Alfred’s Basic Piano Library and Alfred’s Premier Piano Course lesson books.
Finally, standard MIDI and USB-MIDI connectors are provided to allow communication with computers or other electronic
instruments, while recorded songs can also be stored on a USB memory device.
This owner’s manual contains useful information regarding the varied functions and capabilities of the CN33 digital piano.
Please read all sections carefully and keep this documentation handy for future reference.
Table of Contents
¡ Important Safety Instructions ..............4
5. RECORDER ......................................33
‘ FRONT PANEL ............................................................ 8
‘ PEDALS ....................................................................... 8
‘ HEADPHONES............................................................ 9
1) RECORDING (REC BUTTON) ...................................... 33
‘ RECORDING A SECOND PART .............................. 34
2) PLAYING BACK A SONG............................................... 36
‘ PLAYING BACK RECORDED PARTS SEPARATELY ... 36
3) ERASING A SONG ....................................................... 37
2. PLAYING THE PIANO ......................10
6. USB OPERATIONS ...........................38
1) BASIC OPERATIONS..................................................... 10
‘ SETTING UP THE PIANO ........................................ 10
2) DEMO SONGS .............................................................. 11
3) SELECTING A SOUND ................................................. 12
4) DUAL MODE .................................................................. 13
5) SPLIT MODE.................................................................. 15
6) FOUR HANDS MODE .................................................... 17
7) REVERB AND EFFECTS............................................... 19
‘ ADDING REVERB ..................................................... 19
‘ APPLYING EFFECTS ................................................ 20
8) TRANSPOSE.................................................................. 21
9) METRONOME................................................................ 22
‘ STARTING THE METRONOME................................. 22
‘ CHANGING THE METRONOME TIME SIGNATURE ... 22
‘ ADJUSTING THE METRONOME VOLUME .............. 23
10) PANEL LOCK ............................................................... 24
1) USB PLAY ...................................................................... 38
2) USB LOAD ..................................................................... 39
3) USB SAVE...................................................................... 40
4) USB DELETE ................................................................. 41
5) USB FORMAT ................................................................ 42
1. PART NAMES AND FUNCTIONS .......8
3. CONCERT MAGIC ............................25
‘ SELECTING A SONG ............................................... 25
‘ LISTENING TO THE SONG ...................................... 25
‘ PERFORMING A SONG ........................................... 26
‘ CONCERT MAGIC PART VOLUME BALANCE ......... 26
‘ CONCERT MAGIC SONG ARRANGEMENT TYPES ... 27
‘ STEADY BEAT .......................................................... 28
‘ CONCERT MAGIC DEMO MODES........................... 28
‘ CONCERT MAGIC PLAYBACK SPEED .................... 29
4. LESSON FUNCTION.........................30
1) SELECTING A BOOK/SONG ........................................ 30
2) LISTENING TO AND PLAYING A SONG ....................... 31
‘ EXITING THE LESSON FUNCTION ......................... 31
‘ PRACTICING THE LEFT AND RIGHT-HAND PARTS ... 31
‘ ADJUSTING THE TEMPO OF A SONG .................... 31
3) RECORDING A SONG PRACTICE ............................... 32
‘ PLAYING BACK THE RECORDING .......................... 32
‘ ERASING THE RECORDING.................................... 32
7. FUNCTION BUTTONS ......................43
‘ ENTERING A FUNCTION MODE.............................. 43
‘ EXITING A FUNCTION MODE.................................. 43
1) LOWER OCTAVE SHIFT ................................................ 44
2) LOWER PEDAL ON/OFF ............................................... 45
3) DAMPER HOLD ON/OFF............................................... 46
4) DAMPER EFFECT ......................................................... 47
5) STRING RESONANCE .................................................. 48
6) TOUCH CURVE.............................................................. 49
7) FOUR HANDS ON/OFF ................................................. 50
8) TUNING .......................................................................... 51
9) TEMPERAMENT ............................................................ 52
‘ KEY SIGNATURE OF TEMPERAMENT ................... 53
‘ MIDI OVERVIEW ....................................................... 54
‘ CN33 MIDI functions.................................................. 54
10) MIDI CHANNEL............................................................ 55
11) TRANSMIT PROGRAM CHANGE ON/OFF................. 56
12) LOCAL CONTROL ON/OFF......................................... 58
13) MULTI-TIMBRAL MODE ON/OFF ................................ 59
14) CHANNEL MUTE ......................................................... 60
15) SENDING PROGRAM CHANGE NUMBERS .............. 61
16) USER MEMORY........................................................... 62
17) FACTORY RESET ........................................................ 63
8. APPENDICES....................................64
‘ CONNECTING TO OTHER DEVICES ....................... 64
‘ ASSEMBLY INSTRUCTIONS .................................... 66
‘ SPECIFICATIONS ..................................................... 68
‘ MIDI EXCLUSIVE DATA FORMAT ............................. 69
‘ MIDI IMPLEMENTATION CHART ............................. 70
Page
4
Important Safety Instructions
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING
TO REDUCE THE RISK OF
FIRE
OR
ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the leterature accompanying the
product.
Examples of Picture Symbols
denotes that care should be taken.
The example instructs the user to take care not to allow fingers to be trapped.
denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.
denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.
Read all the instructions before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prongs are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or object have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Page
5
WARNING - When using electric products, basic precautions should always be followed,
including the following.
WARNING
The product should be connected to
an AC outlet of the specified voltage.
)&.&&
'&)&
#
#
#
%%),
(&&&)%&)
&)),+%
Do not insert or disconnect the power
cord plug with wet hands.
%
&(
Take care not to allow any foreign
matter to enter the product.
,&)
$(,&
"&)&$-)))%
)&% $',&*&
+&$)&)
The chair must be used properly (it must be
used only when playing the product).
Do not play with it or stand on it.
Only one person is allowed to sit on it.
Do not sit on it when opening the lid.
Re-tighten the bolts occasionally.
%
&&+
%$))%'
When using the headphones, do not
listen for long periods of
time at high volume levels.
"
#"&!
Do not lean against the keyboard.
"
#&'
"$
Do not disassemble, repair or modify
the product.
!
When disconnecting the AC power cord's
plug, always hold the plug
and pull it to remove it.
"#&(
"
#"#%
#
The product is not completely disconnected from the
power supply even when the power switch is turned
off. If the product will not be used for a long time,
unplug the AC power cord from the AC outlet.
This product may be equipped with a polarized line plug (one blade wider
than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
It is a good practice to have the instrument near the AC outlet and the power cord plug in a position
so that it can readily be disconnected in an emergency because electricity is always charging
while the plug is in the AC outlet even in a power switch off condition.
Page
6
CAUTION
Indicates a potential hazard that could result in injury or
damage to the product or other property if the product
is handled incorrectly.
Do not use the product in the following areas.
Areas, such as those near windows, where the product is
exposed to direct sunlight
Extremely hot areas, such as near a heater
Extremely cold areas, such as outside
Extremely humid areas
Areas where a large amount of sand or dust is present
Areas where the product is exposed to excessive
vibrations
Using the product in such areas may result in
product breakdown.
Use the product only in moderate climates (not
in tropical climates).
When you close the keyboard cover,
close it gently.
Closing it roughly may trap your fingers,
resulting in injury.
Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.
OFF
Failure to do so may cause breakdown of this
product and other devices.
Do not drag the product on the floor.
Take care not to drop the product.
Please lift up the product when moving it.
Please note that the product is heavy and must
be carried by more than two persons.
Dropping the product may result in breakdown.
Do not place the product near electrical
appliances such as TVs and radios.
Doing so may cause the product to generate
noise.
If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.
When connecting the AC power cord
and other cords, take care
not to get them tangled.
Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.
Do not wipe the product with benzene
or thinner.
Doing so may result in discoloration or deformation
of the product.
When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.
Do not stand on the product or exert
excessive force.
Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.
Do not place naked flame, such as lighted
candles on the product.
Doing so may cause the illumination to fall over,
resulting in fire.
Ensure that the ventilation is not
impeded by covering the ventilation
openings with items, such as newspaper,
table-cloths, curtains, etc.
Failure to do so may over-heat the product,
resulting in fire.
The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a
minimum distance of 5cm around the product for sufficient ventilation.
Page
7
),)
$*(
-
,-
,+)
(,
,)
#%
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug,
and then contact the shop from which the product was purchased.
'!$#
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
#!$#
Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu'au fond.
!
('"
Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.
%
!(%)
This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference
Regulations, C.R.C., c. 1374.
(,
(
If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose
of it separately by taking it to an appropriate collection point.
You should not mix it with general household waste. Disposing of this product correctly will prevent
potential negative effects on the environment and human health which could otherwise arise due to
inappropriate waste handling.
For further details, please contact your local authority.
(European Union only)
!(,
'&
'!$# Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
#$ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
Products :
Model Number :
Responsible Party Name :
Address :
Telephone
Electronic Piano
CN33
Kawai America Corporation
2055 East University Drive Rancho
Dominguez, CA 90220
310-631-1771
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This applies only to products distributed by Kawai America Corporation.
Page
1
PART NAMES AND
FUNCTIONS
8
1. PART NAMES AND FUNCTIONS
This section explains the locations and functions of the panel buttons and sliders.
‘ FRONT PANEL
z CONCERT MAGIC
The Concert Magic function allows the
CN33 digital piano to be enjoyed by those
with little or no experience of playing the
piano, providing the correct accompaniment
and melody by simply pressing a single key
on the keyboard (page 25).
z LESSON
The Lesson function provides access
to built-in etudes or Alfred lesson
books (USA, Canada, UK, AU only),
offering an enjoyable piano learning
experience (page 30).
z LED DISPLAY
The LED display provides useful
information such as the currently
selected sound type. It also shows
values or status when other
functions are active.
z VALUE
The S and T VALUE
buttons are used to
adjust various settings
and functions.
z MASTER VOLUME
z SOUND SELECT
The MASTER VOLUME slider controls the master volume level of the
internal speakers and connected headphones. Move the slider to the
right to increase the volume, and to the left to decrease the volume.
This slider also controls the headphone volume and LINE OUT output
level (page 64).
The SOUND SELECT buttons are used to select the internal sound(s)
that will be heard when pressing the keys (page 12). These buttons can
also be used to select RECORDER songs and parts (page 33).
‘ PEDALS
The CN33 piano has three pedals: Damper/Sustain, Sostenuto, and Soft.
¡ Damper/Sustain pedal
Sustains the sound after hands are lifted from the keyboard. The sustain pedal is capable of
responding to half pedaling.
Soft pedal
Damper/Sustain
pedal
Sostenuto pedal
¡ Sostenuto pedal
Depressing this pedal after playing the keyboard and before releasing the keys sustains the
sound of only the keys just played. Any keys that are pressed after the Sostenuto pedal is
depressed will not be sustained after the keys are released.
¡ Soft pedal
Depressing this pedal softens the sound and reduces its volume. When the rotary effect is active
the soft pedal is used to change the speed of the rotor between slow and fast.
Page
PART NAMES AND
FUNCTIONS
9
z EFFECTS
The EFFECTS function adds chorus, delay,
tremolo, and rotary speaker simulation
effects to the sound (page 20).
z BALANCE
z METRONOME
The BALANCE slider is used to adjust the
volume balance between the two sounds in
Dual or Split modes, and also controls the
volume of left and right-hand parts of Lesson
songs (pages 15, 17 and 31).
The METRONOME function provides a
steady beat with which to aid piano practice.
The tempo, time signature, and volume
of the metronome can be freely adjusted
(page 22).
z REVERB
z SPLIT
The REVERB function adds reverberation
to the sound, simulating the acoustic
environment of a recital room, stage, or
concert hall (page 19).
The SPLIT function divides the
keyboard into two sections—
Upper and Lower— allowing
each section to be played with
a different sound (page 15).
z POWER SWITCH
The POWER SWITCH is used to turn the
CN33 digital piano on and off. Be sure to turn
off the instrument after playing (page 10).
z TRANSPOSE
The TRANSPOSE function allows the audible pitch of the CN33 digital
piano to be raised or lowered in half steps (page 21).
z USB
z RECORDER
The REC button is used for recording performances and when using the Lesson
function, to record practices for comparison with the built-in songs and etudes.
The PLAY/STOP button is used to select a song and part to play, and to start/stop
playback of the recorded songs. It is also used to start/stop playback when using
the Lesson function (page 33).
The USB functions allow recorder songs to be saved to and loaded from
a USB memory device (page 38).
z FUNCTION
Pressing the TRANSPOSE and USB buttons simultaneously enters the
FUNCTION modes, allowing various advanced parameters of the CN33
digital piano to be adjusted (page 43).
‘ HEADPHONES AND USB CONNECTORS
¡ Headphone jack (x 2)
There are two headphone jacks located on the left underside of
the piano.
Up to two pairs of headphones can be connected simultaneously.
„ For information on attaching the headphone hook, please refer
to the assembly instructions on page 66.
¡ USB (to device)
The USB (to Device) connector is located beside the two headphone
jacks, and used to load and save recorder songs to a USB memory
device (page 38).
1
Page
10
2. PLAYING THE PIANO
1) BASIC OPERATIONS
2
PLAYING THE
PIANO
This section provides the basic procedures for turning the power on and playing the CN33 digital piano.
‘ SETTING UP THE PIANO
The CN33 digital piano is equipped with stereo speakers and an internal amplifier—no addition equipment is
required to begin playing the instrument, provided AC power is available.
… Step 1
Connect one end of the AC power cable to the CN33 digital piano’s power
jack and the other end of the cable to a wall AC outlet.
Power
cable entry
point
Speaker
Side panel
… Step 2
Press the POWER SWITCH to turn on the power.
The POWER SWITCH is located at the right end of the
keyboard.
ON
The LED indicator for the PIANO 1 button will turn
on, and the Concert Grand sound will be selected
automatically.
… Step 3
Adjust the volume level using the MASTER VOLUME slider.
The MASTER VOLUME slider controls the volume level
of the speakers and connected headphones.
Move this slider to the right to increase the volume and
move it to the left to decrease the volume.
Set the volume to a comfortable listening level—the
middle is often a good starting point.
… Step 4
Play the piano.
The sound of a Concert Grand piano will be heard as
the keys are pressed.
Page
11
2) DEMO SONGS
„ PIANO 1
Concert Grand : KAWAI
Studio Grand
: KAWAI
Mellow Grand
: Sonata No.30 Op.109 / Beethoven
Modern Piano
: KAWAI
„ PIANO 2
Concert Grand 2 : Waltz No.6 Op.64-1 “Petit chien” / Chopin
Studio Grand 2 : KAWAI
Mellow Grand 2 : La Fille aux Cheveux de lin / Debussy
Rock Piano
: KAWAI
„ ELECTRIC PIANO
Classic E.Piano : KAWAI
Modern E.P.
: KAWAI
Modern E.P. 2
: KAWAI
„ DRAWBER
Jazz Organ
: KAWAI
Drawbar Organ : KAWAI
Drawbar Organ 2 : KAWAI
„ CHURCH ORGAN
Church Organ
: Chorale Prelude “Wachet auf, ruft uns
Diapason
Full Ensemble
„ HARPSI & MALLETS
Harpsichord
: French Suite No.6 / Bach
Vibraphone
: KAWAI
Clavi
: KAWAI
„ STRINGS
Slow Strings
: KAWAI
String Pad
: KAWAI
String Ensemble : Le quattro stagioni La primavera / Vivaldi
„ CHOIR & PAD
Choir
: Danny Boy / Irish folk song
Choir 2
: KAWAI
New Age Pad
: KAWAI
Atmosphere
: KAWAI
„ BASS
Wood Bass
: KAWAI
Fretless Bass
: KAWAI
W. Bass & Ride : KAWAI
die Simme.” / Bach
: Wohl mir, daß ich Jesum habe / Bach
: KAWAI
KAWAI regret that sheet music for KAWAI original demo songs is not available.
… Step 1
Press the CONCERT MAGIC and LESSON buttons simultaneously.
The LED indicators for the CONCERT MAGIC and LESSON
buttons will turn on, and the SOUND SELECT buttons will
start to flash.
The Concert Grand demo song will start to play.
After the PIANO 1 demo songs have finished playing, the demo songs from another sound category will be selected
at random.
… Step 2
While the Concert Grand demo song is playing, press the CHURCH ORGAN button.
The Church Organ demo song will begin to play.
After the CHURCH ORGAN demo songs have finished playing, the demo songs from another sound category will
be selected at random.
… Step 3
Press the CONCERT MAGIC, LESSON, or PLAY/STOP buttons to exit the demo mode.
The LED indicators for the CONCERT MAGIC and LESSON
buttons will turn off, the SOUND SELECT buttons will stop
flashing, and the demo songs will stop playing.
PLAYING THE
PIANO
The internal demonstration songs provide an excellent introduction to the varied capabilities of the CN33 digital
piano, presenting the instrument’s rich selection of voices. There are 30 built-in demo songs, each presenting a
musical piece to introduce the different internal sounds.
2
Page
12
3) SELECTING A SOUND
The CN33 digital piano features 36 realistic sounds suitable for various musical styles, with multiple sounds assigned
to each of the 9 category buttons listed below.
Button
2
PLAYING THE
PIANO
PIANO 1
PIANO 2
ELECTRIC PIANO
DRAWBAR
CHURCH ORGAN
Instrument name
Concert Grand
Studio Grand
Mellow Grand
Modern Piano
Concert Grand 2
Studio Grand 2
Mellow Grand 2
Rock Piano
Classic E.Piano
Modern E.P.
60’s E.P.
Modern E.P. 2
Jazz Organ
Drawbar Organ
Drawbar Organ 2
Be 3
Church Organ
Diapason
Full Ensemble
Diapason Oct
Button
HARPSI & MALLETS
STRINGS
CHOIR & PAD
BASS
Instrument name
Harpsichord
Harpsichord 2
Vibraphone
Clavi
Slow Strings
String Pad
Warm Strings
String Ensemble
Choir
Choir 2
New Age Pad
Atmosphere
Wood Bass
Finger Bass
Fretless Bass
W. Bass & Ride
… Step 1
Press the ELECTRIC PIANO button.
ON
The LED indicator for the ELECTRIC PIANO button will
turn on.
The variation number ‘1’ will be shown in the LED
display, indicating that the Classic E.Piano sound has
been selected.
Several sounds are assigned to each SOUND SELECT button.
Press the same SOUND SELECT button multiple times to cycle through each sound variation.
… Step 2
Play the piano.
The sound of Classic E.Piano will be heard as the keys
are pressed.
Use the MASTER VOLUME slider to adjust the volume,
if necessary.
… Step 3
Select other sounds.
Internal sounds can also be selected by pressing the S or T VALUE buttons.
Page
13
4) DUAL MODE
The DUAL function allows two internal sounds to be layered together, creating a more complex sound.
For example, a piano can be layered with strings, or a church organ with a choir sound.
… Step 1
ON
ON
ON
The LED indicators for the PIANO1 and STRINGS
buttons will turn on, indicating that both sounds have
been selected simultaneously, and DUAL mode has
been activated.
Press two SOUND SELECT buttons simultaneously
The selected sound variation numbers will be shown in
the LED display.
The left number represents the primary sound, while the
right number represents the secondary sound.
… Step 2
Play the piano.
The Concert Grand and Slow Strings sounds will be
heard Simultaneously.
… Step 3
Press and hold the STRINGS button, then press the PIANO1 button.
ON
ON
2
1
‘2-1’ will be shown in the LED display, indicating that the
primary sound has changed to Studio Grand.
Press and hold the button
… Step 4
Press and hold the PIANO1 button, then press the CHURCH ORGAN button three times.
ON
2
Press and hold the button
ON
1
Press three times
The LED indicators for the PIANO1 and CHURCH ORGAN
buttons will turn on.
‘2-3’ will be shown in the LED display, indicating that the
secondary sound has been changed to Full Ensemble.
To combine two sounds assigned to the same SOUND SELECT button, first select the primary sound, next press and
hold the SOUND SELECT button, then press the S or T VALUE buttons to select the desired secondary sound.
PLAYING THE
PIANO
Press and hold the PIANO1 button, then press the STRINGS button.
2
Page
14
… Step 5
Use the BALANCE slider to adjust the volume balance between the two sounds.
2
PLAYING THE
PIANO
Increases the volume of
the sound assigned to the
leftmost selected SOUND
button
Increases the volume of
the sound assigned to
the rightmost selected
SOUND button
… Step 6
Press any individual SOUND SELECT button to deactivate DUAL mode.
Page
15
5) SPLIT MODE
The SPLIT function divides the keyboard of the CN33 digital piano into Upper and Lower sections, allowing each
section to be played with a different sound.
… Step 1
ON
ON
ON
The LED indicator for the SPLIT button will turn on,
indicating that SPLIT mode has been activated.
In addition, the LED indicator for the PIANO1 button
will also turn on, indicating the Upper section sound,
while the BASS button will start to flash, indicating
the Lower section.
The selected sound variation numbers will be shown
in the LED display.
The left number represents the Lower section, while
the right number represents the Upper section.
… Step 2
Play the piano.
The Concert Grand sound will be heard in the Upper section, while the Wood Bass sound will be heard in the
Lower section. An ensemble performance can be enjoyed by playing the chords and the melody with the right
hand, while playing a bass line with the left hand.
The number of keys used for the Upper and Lower sections can be freely adjusted by changing the Split Point.
„ The default Split Point setting is set between B2 and C3.
… Step 3
Press and hold the SPLIT button, then press a key on the keyboard.
ON
new Split Point
Press and hold the button
1
Lower section
Upper section
2
Press a key
The name of the pressed key will be shown in the LED display, and will become the new Split Point.
PLAYING THE
PIANO
Press the SPLIT button.
2
Page
16
… Step 4
Press the PIANO2 button three times.
The LED indicator for the PIANO2 button will turn
on.
ON
‘1-3’ will be shown in the LED display, indicating
that the Upper section sound has been changed
to Mellow Grand 2.
2
PLAYING THE
PIANO
Press three times
… Step 5
Press and hold the SPLIT button, then press the HARPSI & MALLETS button twice.
ON
ON
ON
2
The LED indicator for the HARPSI & MALLETS button
will start to flash.
1
Press twice
Press and hold the button
‘2-3’ will be shown in the LED display, indicating
that the Lower section sound has been changed
to Vibraphone.
… Step 6
Use the BALANCE slider to adjust the volume balance between the upper and lower sections.
Lower section
Upper section
… Step 7
Press the SPLIT button to deactivate split mode.
The LED indicator for the SPLIT button will turn off.
„ When SPLIT mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower
section. Please refer to the instructions on page 44 for more information.
„ The influence of the damper/sustain pedal over the Lower section can also be turned on and off. Please refer to the
instructions on page 45 for more information.
Page
17
6) FOUR HANDS MODE
The FOUR HANDS function divides the keyboard of the CN33 digital piano into separate Upper and Lower sections
in a similar way to that of the SPLIT function. In addition, the octave/pitch of each section is also adjusted,
allowing two people to play the piano together.
Split Point
Upper section
PLAYING THE
PIANO
Lower section
c
c
c
… Step 1
Press and hold the SPLIT button, then press the damper/sustain (right) pedal and the soft (left) pedal
together.
Damper/Sustain
pedal
Soft pedal
Press and hold the button
Depress the pedals
The LED indicator for the SPLIT button will start to
flash, indicating that FOUR HANDS mode has been
activated.
In addition, the LED indicator for the Upper section
sound button will also turn on, while the Lower
section sound button will start to flash.
The selected sound variation numbers will be shown
in the LED display.
The left number represents the Lower section, while
the right number represents the Upper section.
When activating FOUR HANDS mode for the first
time, the sound of both the Upper and Lower sections
will be set to Concert Grand.
… Step 2
Play the piano.
With FOUR HANDS mode activated, the sounds in the Upper section are transposed two octaves down from the
original pitch, while sounds from the Lower section are transposed two octaves up from the original pitch, allowing
two people to play within the same key range.
The number of keys used for the Upper and Lower sections can be freely adjusted by changing the Split Point.
„ The default Split Point setting is set between E3 and F3.
„ When FOUR HANDS mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the
Lower section. Please refer to the instructions on page 44 for more information.
2
Page
18
… Step 3
Press the SOUND SELECT buttons to adjust the Upper section sound.
ON
2
PLAYING THE
PIANO
… Step 4
Press and hold the SPLIT button, then press the SOUND SELECT buttons to adjust the Lower section
sound.
ON
ON
2
1
Press and hold the button
… Step 5
Press and hold the SPLIT button, then press a key on the keyboard to adjust the Split Point.
„ The FOUR HANDS mode Split Point will not affect the SPLIT mode Split Point.
… Step 6
Press the SPLIT button again to deactivate FOUR HANDS mode.
The LED indicator for the SPLIT button will turn off, and the CN33 digital piano will return to the previously selected
sound.
„ It is also possible to activate FOUR HANDS mode by using the FOUR HANDS ON/OFF function in the Function menu.
Please refer to the instructions on page 50 for more information.
Page
19
7) REVERB AND EFFECTS
The CN33 digital piano allows performers to alter sounds by adding reverb and applying effects.
When selecting some internal sounds, the LED indicators for the EFFECTS or REVERB buttons may turn on
automatically. This is because certain internal sounds are prepared with an effect enabled as the default setting,
enhancing tonal quality and improving acoustic realism.
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall.
There are five types of reverb available:
Reverb type
Room 1
Room 2
Stage
Hall 1
Hall 2
Description
Simulates the ambiance of a living room or small rehearsal room.
Simulates a larger room than Room 1.
Simulates the ambiance of a small hall or live stage.
Simulates the ambiance of a concert hall or theatre.
Simulates a larger hall or theatre than Hall 1.
… Step 1
Press and hold the REVERB button, then press the S or T VALUE buttons to select the desired reverb
type.
2
1
Room 1
Room 2
Press and hold the button
Stage
Hall 1
Hall 2
The currently selected reverb type will
be shown in the LED display.
… Step 2
Press the REVERB button again to deactivate the reverb simulation.
The LED indicator for the REVERB button will turn off, indicating that the reverb simulation has been
deactivated.
Pressing the REVERB button once again will reactivate the reverb simulation, recalling the previously selected
reverb type.
„ Reverb settings are specific to each individual sound.
„ Any changes made to the reverb type or on/off status will remain until the power is turned off.
„ When the power is turned off, the reverb settings will return to the default settings.
PLAYING THE
PIANO
‘ ADDING REVERB
2
Page
20
‘ APPLYING EFFECTS
Effects alter the impression and feeling of the sounds.
There are seven types of effect available:
Effect type
Description
Simulates the rich character of a vocal choir or string ensemble, by layering a slightly detuned version
of the sound over the original to enrich it.
2
PLAYING THE
PIANO
Chorus
Delay 1
Delay 2
Delay 3
Tremolo
Rotary 1
Rotary 2
Adds an echo to the sound. There are three types of delay available, each with a different length of
delay between the echoes.
Adds vibrato to the sound.
Simulates the sound of a rotary speaker cabinet commonly used with electronic organs. Rotary 1 is a
normal rotary effect while and Rotary 2 adds distortion.
„ When either the Rotary 1 or Rotary 2 effect is selected, pressing the Soft pedal will alternate the speed of the rotary
speaker simulation between ‘Slow’ and ‘Fast’ effect modes.
… Step 1
Press and hold the EFFECTS button, then press the S or T VALUE buttons to select the desired effect
type.
2
1
Press and hold the button
Chorus
Delay 1
Delay 2
Delay 3
The currently selected effect type will be shown
in the LED display.
Rotary 2
Rotary 1
Tremolo
… Step 2
Press the EFFECTS button again to deactivate the effects.
The LED indicator for the EFFECTS button will turn off, indicating that the effects have been deactivated.
Pressing the EFFECTS button once again will reactivate the effects, recalling the previously selected effect type.
„ Effects settings are specific to each individual sound.
„ Any changes made to the effect type or on/off status will remain until the power is turned off.
„ When the power is turned off the effects settings will return to the default settings.
Page
21
8) TRANSPOSE
The TRANSPOSE function allows the audible pitch of the CN33 digital piano to be raised or lowered in half steps.
This is particularly useful when accompanying instruments with different tones, or when a song learned in one key
must be played in another key. The transpose feature allows the song to be played in the original key, but heard
in another key.
Press and hold the TRANSPOSE button, then press the S or T VALUE buttons to specify the desired
transposition value.
The LED indicator for the TRANSPOSE button will turn on,
indicating that the transpose function has been activated.
2
1
Press and hold the button
The currently selected transpose setting will be shown in the
LED display.
The pitch can be transposed by up to 12 halftones higher or
12 halftones lower.
Alternatively, while holding the TRANSPOSE button, press the keys from C2 to C4, to set the desired
transpose value.
The ‘C’ key at the middle of
the keyboard corresponds to
the value 0
1
Press and hold the button
-12
0
C
+12
2
… Step 1
Press the TRANSPOSE button again to deactivate the transpose function.
The LED indicator for the TRANSPOSE button will turn off, indicating that the transpose function has been
deactivated.
Pressing the TRANSPOSE button once again will reactivate the transpose function, recalling the previously selected
transpose value type.
„ Transpose is active when the LED indicator for the TRANSPOSE button is turned on, and the notes are transposed
according to the specified transpose value. For example, if the transpose setting is ‘-3’ and the LED indicator for the
TRANSPOSE button is turned on, and the notes will be transposed 3 half steps lower. When the LED indicator for
the TRANSPOSE button is turned off, the transpose setting will automatically return to ‘0’ (no transposition) with one
touch.
„ When the transpose value is set to ‘0’, the LED indicator for the TRANSPOSE button will not turn on.
„ Any changes made to the transpose value will remain until the power is turned off.
PLAYING THE
PIANO
… Step 1
2
Page
22
9) METRONOME
Rhythm is one of the most important elements when learning music. It is important to practice playing the piano
at the correct tempo and with a steady rhythm. The CN33 digital piano’s metronome function helps learners to
achieve this by providing a steady beat to play along with.
‘ STARTING THE METRONOME
2
PLAYING THE
PIANO
… Step 1
Press the TEMPO button.
The LED indicator for the TEMPO button will turn on, and the metronome will begin
counting with a 4/4 beat.
The metronome tempo in beats per minute (BPM) will be shown in the LED display.
… Step 2
Press the S or T VALUE buttons to adjust the metronome tempo to the desired value.
The metronome tempo can be adjusted within the range of 10-400 beats per minute.
… Step 3
Press the TEMPO button again to deactivate the metronome.
The LED indicator for the TEMPO button will turn off, indicating that the metronome has been deactivated.
„ Any changes made to the metronome tempo will remain until the power is turned off.
„ When the power is turned off, the metronome tempo will return to the default setting of ‘120’ (120 BPM).
‘ CHANGING THE METRONOME TIME SIGNATURE
The metronome produces two types of click, with a bell sound indicating the first beat of a bar - this is a 4-beat or
4/4 time signature. It is possible to select a different signature where appropriate. There are seven different types
of time signature available: 1/4, 2/4, 3/4, 4/4, 5/4, 3/8, and 6/8.
… Step 1
Press the BEAT button.
The LED indicator for the BEAT button will turn on and the metronome will begin
counting with a 4/4 beat.
The metronome time signature will be shown in the LED display.
Page
23
… Step 2
Press the S or T VALUE buttons to select the desired time signature.
The currently selected time signature will be shown in the LED display.
2/4
3/4
4/4
5/4
3/8
6/8
… Step 3
Press the BEAT button again to deactivate the metronome.
The LED indicator for the BEAT button will turn off, indicating that the metronome has been deactivated.
Both the TEMPO button and the BEAT button can be used to activate and deactivate the metronome, depending
on whether the tempo or time signature is being adjusted.
„ Any changes made to the metronome time signature setting will remain until the power is turned off.
„ When the power is turned off, the metronome time signature will return to the default setting of ‘4/4’.
‘ ADJUSTING THE METRONOME VOLUME
The volume level of the metronome can also be adjusted.
… Step 1
Press the TEMPO and BEAT buttons simultaneously.
The LED indicators for both the TEMPO and BEAT buttons will turn on, and the
metronome will begin counting with the previously selected time signature.
The metronome volume will be shown in the display.
… Step 2
Press the S or T VALUE buttons to adjust the metronome volume to the desired level.
The metronome volume can be adjusted within the range of 1 (soft) to 10 (loud).
… Step 3
Press the TEMPO and BEAT buttons simultaneously again to deactivate the metronome.
The LED indicators for the TEMPO and BEAT buttons will turn off, indicating that the metronome has been
deactivated.
„ Any changes made to the metronome volume will remain until the power is turned off.
„ When the power is turned off, the metronome volume will return to the default setting of ‘5’.
PLAYING THE
PIANO
1/4
2
Page
24
10) PANEL LOCK
The Panel Lock function allows the state of all panel buttons to be temporarily locked, preventing sounds and other
settings from being changed accidentally while playing the piano.
… Step 1
2
PLAYING THE
PIANO
Press the CONCERT MAGIC and USB buttons simultaneously.
The CN33 control panel will stop responding to button pushes.
The letters ‘Lok’ will be shown in the LED display, indicating that the button panel is
locked.
… Step 2
Press the CONCERT MAGIC and USB buttons simultaneously again to deactivate the panel lock.
The CN33 control panel will return to normal operation.
„ When the power is turned off, the Panel Lock function will be released.
Page
25
3. CONCERT MAGIC
The great German composer Johann Sebastian Bach once said “Playing the keyboard is simple. Just strike the
right keys at the right time”. Many pianists wish it were quite that straightforward. Fortunately, KAWAI have devised
a method of playing the keyboard that is very simple, without even needing to strike the right keys.
‘ SELECTING A SONG
The 88 Concert Magic songs are assigned to each of the 88 keys, and classified by song category into eight groups,
such as Children’s Songs, American Classics, Christmas Songs etc. Please refer to the separate ‘Concert Magic
Song List / Lesson Song List’ booklet for a complete listing of available Concert Magic songs.
… Step 1
Press and hold the CONCERT MAGIC button, then press the key to which the desired Concert Magic song is
assigned.
Song No.
The song number will be briefly shown in the display.
Hold down the button
Press a key
‘ LISTENING TO THE SONG
If the performer is already familiar with the selected Concert Magic song, he/she may wish to begin playing straight
away. However, those unfamiliar with the piece may alternatively wish to listen to the song first, before attempting
to play it.
… Step 1
Press the PLAY/STOP button.
The selected Concert Magic song will start to play.
While listening, different Concert Magic songs can be selected by pressing the VALUE buttons.
… Step 2
Press the PLAY/STOP button again to finish listening to the song.
CONCERT MAGIC
With CONCERT MAGIC, absolutely anyone can sit at the CN33 digital piano and make real music - even complete
beginners who have never taken a piano lesson in their life. To enjoy performing with Concert Magic, simply select a
favorite piece from the 88 pre-programmed songs and tap any key with a steady rhythm and tempo. Concert Magic
will provide the correct melody and accompaniment notes, regardless of which keys are pressed. With Concert
Magic anybody, young or old, can enjoy playing music from the moment they sit down at the CN33 digital piano.
3
Page
26
‘ PERFORMING A SONG
… Step 1
Tap out the rhythm of the selected song on any black or white key.
3
CONCERT MAGIC
Concert Magic songs will respond to changes in playing style. As the keys are tapped harder, the music will grow
louder; if the keys are tapped more softly, the music will become quieter. Tapping faster will cause the music to speed
up, while tapping slower will make the music slow down accordingly. Using Concert Magic, even inexperienced
pianists can sound like they have been playing for years, simply by pressing one key with one finger.
Concert Magic is a perfect method for small children to learn music, especially when developing a sense of rhythm.
For older people who may believe it is too late to learn the piano, Concert Magic offers an enjoyable first step.
With Concert Magic, the CN33 digital piano can be enjoyed by everyone in the family, even those who have never
touched a musical instrument in their life.
‘ CONCERT MAGIC PART VOLUME BALANCE
When used with Concert Magic, the BALANCE slider adjusts the volume balance of the melody part and the
accompaniment.
… Step 1
Use the BALANCE slider to adjust the volume balance.
Accompaniment
Melody
As the slider is moved to the right, the sound of the melody becomes louder and the accompaniment becomes
softer. The balance changes in the opposite way when the slider is moved to the left.
Page
27
‘ CONCERT MAGIC SONG ARRANGEMENT TYPES
After playing with Concert Magic for a while, performers may feel that such playing is too easy and that there is
very little to learn. While it is true that some of the songs are very easy to play, even for beginners, there are also
some songs which will prove challenging, and require practice to play proficiently.
Each of the 88 Concert Magic songs fall into one of three different arrangement types, depending on the skill level
required to perform them.
„ EASY BEAT
These are the easiest songs to play. To perform them, simply tap out a constant steady beat on any key on the keyboard.
Look at the following example, ‘Für Elise’. Press the key with a steady sixteenth note rhythm.
X X
X X X X X X
X X X X
X
X
X
X
X
X
X
X
„ MELODY PLAY
These songs are also quite easy to play, especially if they are familiar to the player. To perform them, tap out the
rhythm of the melody on any key on the keyboard. Singing along as the rhythm is tapped can be helpful.
Play ‘Twinkle, Twinkle, Little Star’ for example. Follow the melody’s rhythm as shown.
Key on
X
X
X
X
X
X
X
X
X
X
X
X
X
X
When performing fast songs with Concert Magic, it is sometimes easier to tap two different keys with two alternating
fingers in order to play at greater speed.
„ SKILLFUL
These songs range in difficulty from moderately difficult to difficult. To perform them, tap out the rhythm of both the
melody and the accompaniment notes on any key on the keyboard, such as ‘Waltz of the Flowers’ shown below.
Key on
X
X
X
X
X
X
X X
X
X
X
X
X
It may take a little practice to perform the Concert Magic songs proficiently. A good way to learn is to listen to these
pieces first, and then try to tap out the rhythms that are heard.
„ The separate ‘Concert Magic Song List / Lesson Song List’ booklet lists the arrangement type next to each song title as
‘EB’ for Easy Beat, ‘MP’ for Melody Play and ‘SK’ for Skillful.
CONCERT MAGIC
Key on
3
Page
28
‘ STEADY BEAT
Steady Beat allows Concert Magic songs to be played by simply tapping any key with a constant steady beat,
regardless of the song arrangement type.
… Step 1
Press and hold the CONCERT MAGIC button.
The currently selected Concert Magic mode will be shown in the LED display.
… Step 2
3
CONCERT MAGIC
While still holding the CONCERT MAGIC button, use the VALUE button to change the Concert Magic mode
to STEADY BEAT (C-2).
Hold down the button
… Step 3
Start by tapping any key with a constant steady beat.
The tapping speed will set the tempo for the song. Both the accompaniment and melody parts will be played
automatically in time with the tapped tempo.
‘ CONCERT MAGIC DEMO MODES
There are three ways to listen to the Concert Magic songs in the DEMO mode.
¡ ALL PLAY
Press the CONCERT MAGIC button and then press the PLAY/STOP button without selecting a song. The CN33
digital piano will play back all of the Concert Magic songs in order.
¡ RANDOM PLAY
Press the CONCERT MAGIC button and then press the LESSON button. The CN33 digital piano will play back all
of the Concert Magic songs in random order.
¡ CATEGORY PLAY
Press and hold the CONCERT MAGIC and LESSON buttons and press the piano key to which the desired song is
assigned. The CN33 digital piano will play back the selected song and then continue to play the rest of the songs
in the same category.
To stop the demo, press the PLAY/STOP button.
Page
29
‘ CONCERT MAGIC PLAYBACK SPEED
The TEMPO button is also used to adjust the playback speed of Concert Magic songs.
… Step 1
After selecting a Concert Magic song to play back, press and hold the TEMPO button.
The current tempo will be shown in the LED display.
… Step 2
While holding down the TEMPO button, use the VALUE buttons to change the tempo.
Hold down the button
Decrease the tempo
The tempo of the selected Concert Magic song can be adjusted either before play back, or while the song is
playing.
CONCERT MAGIC
Increase the tempo
3
Page
30
4. LESSON FUNCTION
The CN33 digital piano’s Lesson function helps performers to practice the piano with a collection of etudes from
Czerny and Burgmüller, or songs from Alfred’s Basic Piano Library and Alfred’s Premier Piano Course lesson books
(USA, Canada, Australia and UK only). It is possible to listen to each etude or song at various tempos, practicing
the left and right hand parts separately, before eventually recording a practice session for self-evaluation.
Alfred’s Basic Piano Library and Alfred’s Premier Piano Course lesson books are sold separately. Please check
with local dealers or contact Alfred’s customer service by telephoning 818-892-2452 (USA & Canada), 0-95240033
(Australia), +44 (0)1279828960 (UK). Or alternatively, by e-mailing [email protected].
1) SELECTING A BOOK/SONG
… Step 1
4
LESSON
FUNCTION
Press the LESSON button.
The LED indicator for the LESSON button will turn on to indicate
that lesson mode is enabled.
An alphabet letter and a 2-digit number will be shown in the LED
display. The alphabet letter refers to a song book and the 2-digit
number refers to a song number.
Lesson availability differs according to geographical location:
US, Canada,
UK, Australia
Rest of
the World
Letter
A
B
C
D
B
C
Lesson Book Name
Alfred’s Premier Piano Course Lesson 1A
Alfred’s Premier Piano Course Lesson 1B
Alfred’s Basic Piano Library Lesson Book Level 1A
Alfred’s Basic Piano Library Lesson Book Level 1B
Burgmüller: 25 Progressive Pieces, Opus 100
Czerny: 30 Czerny Etudes de Mécanisme, Opus 849
… Step 2
Press and hold the LESSON button, then press the S or T
VALUE buttons to select the desired lesson book type.
Hold down the button
… Step 3
Press the S or T VALUE buttons (without holding the LESSON
button) to select the desired lesson song.
It is also possible to select a song directly by holding down the
LESSON button and pressing a key on the keyboard. Please refer
to the separate ‘Concert Magic Song List / Lesson Song List’ booklet
for a complete listing of available lesson songs.
Page
31
2) LISTENING TO AND PLAYING A SONG
… Step 1
Press the PLAY/STOP button to play the selected song.
There will be a one bar count-in before the song starts to play.
Press the PLAY/STOP button to stop and reset the song.
If the PLAY/STOP button is pressed again, the song will restart from the beginning.
‘ EXITING THE LESSON FUNCTION
… Step 1
Press the LESSON button.
The LED indicator of the LESSON button will turn off, and the CN33
digital piano will return to normal operation mode.
‘ PRACTICING THE LEFT AND RIGHT-HAND PARTS
… Step 1
Use the BALANCE slider to adjust the volume balance.
Decreases the volume of
the right-hand part
Decreases the volume of
the left-hand part
Moving the balance slider partially to the left will gradually decrease the volume of the right-hand part, allowing
the right-hand part to be practiced while the pre-recorded part plays softly as a guide. When the balance slider is
moved fully to the left, the pre-recorded right-hand part will be muted completely.
‘ ADJUSTING THE TEMPO OF A SONG
… Step 1
Press and hold the TEMPO button then press the S or T VALUE buttons to increase or decrease the
tempo of the song.
To reset the tempo to the default speed, select another song.
LESSON
FUNCTION
The volume balance of the left and right-hand parts can be adjusted using the BALANCE slider.
4
Page
32
3) RECORDING A SONG PRACTICE
While in Lesson mode, song practice can be recorded for playback and self-evaluation. The pre-recorded left and
right-hand parts will be heard while the song practice is recorded. As noted previously, the BALANCE slider may
be used to mute either pre-recorded left or right-hand parts.
… Step 1
Use the BALANCE slider to adjust the volume balance.
Decrease the volume of
the right-hand part
Decrease the volume of
the left-hand part
… Step 2
Press the REC button.
4
LESSON
FUNCTION
There will be a one bar count-in before the recording starts.
… Step 3
Press the PLAY/STOP button again to stop the recording and reset the song to the beginning.
Recording will also stop automatically at the end of the lesson song.
‘ PLAYING BACK THE RECORDING
… Step 1
Press the PLAY/STOP button to listen to the recording.
The recorded performance will be played.The left and righthand playing volume can be changed using the BALANCE
slider.
Accompaniment
Melody
‘ ERASING THE RECORDING
… Step 1
Press the PLAY/STOP and REC buttons simultaneously to erase the recording.
„ Recordings made while using the Lesson function cannot be saved and are intended for temporary reference only. When
changing to another song, exiting the Lesson function or turning off the CN33 digital piano power, Lesson recordings
will be erased.
„ Preset Lesson songs cannot be permanently overwritten or erased.
Page
33
5. RECORDER
The RECORDER function records performances in a similar way to that of a tape recorder. However, the CN33
digital piano records songs as digital data, instead of audio data - storing the music inside the instrument. Because
each song is stored digitally, it is possible to modify various aspects during playback, such as adjusting the tempo
without changing the pitch, or selecting different sound types and effects settings. Once fully understood, the
recorder function provides an easy to use tool for both practicing and playing the piano.
1) RECORDING (REC BUTTON)
The CN33 digital piano allows up to three different songs to be recorded, stored in memory, and played back at
the touch of a button. Each song has two separate tracks called ‘Parts’ that can be recorded independently. This
allows the left-hand part to be recorded first on one track, then the right-hand part to be recorded later on the other
track, while listening to the first part.
When recording or playing back a song, each part (track) can be re-recorded or played back freely. Attempting to
re-record a part will automatically erase all previously recorded performance information for that part, therefore when
recording parts separately, it is most important to select the correct part carefully, in order to prevent accidentally
overwriting a previously recorded part.
… Step 1
Press and hold the REC button, then select a SONG (1, 2 or 3) and PART number (1 or 2).
1
2
3
Select a song
Hold down the REC button
Select a part
While pressing the REC button, the LED indicators for one SONG button and one PART button will start to flash,
indicating the song and the part to be recorded.
During this time, the SONG and PART to be recorded can be changed freely by pressing the desired SONG
or PART button.
If no PART is selected PART1 will be selected automatically.
When the REC button is released, the LED indicators for the selected SONG and PART buttons will stop flashing
and the LED indicator for the REC button will turn on. This is the Standby state for recording. Furthermore, the LED
indicator for the SOUND SELECT button will also turn on, allowing the sound for recording to be changed.
RECORDER
The REC button is used for recording.
The SONG buttons and PART buttons correspond to the SOUND SELECT buttons.
5
Page
34
… Step 2
Start to play the piano.
The recorder will automatically start recording with the first note played.
During this time, the LED indicators for the REC and PLAY/STOP buttons will be turned on.
Any changes made to the sound while recording will also be recorded.
The recording can be started by pressing the PLAY/STOP button instead of pressing a key, allowing a blank bar
to be inserted at the beginning of a song.
… Step 3
5
RECORDER
Press the PLAY/STOP button to stop recording.
The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will
be saved to memory automatically.
Saving may take a few moments and during this time the piano will not respond to any other operations.
To record the piece again, simply repeat the above procedure. The new recording will completely erase the previous
one.
‘ RECORDING A SECOND PART
A second part can be recorded in the second track of the same song. After recording the first part, select the other
track and record the second part.
… Step 1
Press and hold the REC button again and press the BASS button to select to record PART2.
Select part 2
2
1
Hold down the REC button
The LED indicators for the SONG1 button and PART2 button will start to flash, indicating that they are selected
for recording.
Furthermore, the LED indicator for the PART1 button will now be turned on, indicating that PART1 has already
been recorded.
Page
35
… Step 2
Start to play the piano.
While recording the second part, the previously recorded first part will also play. During this time, the LED indicators
for the REC button and PLAY/STOP button will be turned on.
To start playing back the first part and then recording the second part from a certain point, later in the song, press
the PLAY/STOP button instead of playing the keyboard to start playback, then begin recording the second part
when necessary.
… Step 3
Press the PLAY/STOP button to finish recording.
„ The total recording capacity of the CN33 digital piano’s memory is approximately 15,000 notes, with button and pedal
presses also counted as one note.
When the maximum capacity is reached, recording will stop and all music recorded up until that point will be saved to
memory automatically.
„ Performance data stored inside the CN33 digital piano’s memory will be saved even after turning off the power.
„ It is possible to temporarily turn off (mute) a previously recorded part, for example PART1, before recording a new part,
for example PART2. This function can be useful to avoid distraction while recording. To mute PART1, hold the PLAY/STOP
button and press the PART1 button, the LED indicator for PART1 will turn off.
„ Panel operations stored during recording:
x Changes made to the sound type.
x Shifts between DUAL and SPLIT modes.
„ Panel operations NOT stored during recording:
x Changes made to effect settings – the selected effect will be applied to the selected sound type.
x Changes made to temp (the tempo set immediately before recording will be stored, however).
x Changes made using the BALANCE slider in DUAL or SPLIT modes – the volume balance set immediately before
recording will be stored, however.
x Turning the TOUCH CURVE or TRANSPOSE functions ON or OFF – regardless of the transpose settings the
performance will be replayed at the pitch originally used for the recording.
RECORDER
The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will
be saved to memory automatically.
5
Page
36
2) PLAYING BACK A SONG
The PLAY/STOP button is used to start and stop playback of the recorded song, and to also select which
song and part is played.
… Step 1
Press the PLAY/STOP button to start playing the recorded song.
1
2
Hold down the button
Press the PLAY/STOP button again to stop playback.
To select a different song for playback, hold the PLAY/STOP button and press the SOUND SELECT button that
corresponds to the desired song. The song will begin playback when the two buttons are released.
„ While the song is being played, performance information is also sent to supported devices as MIDI data (See page 47).
PART1 is sent on 1ch and PART2 is sent on 2ch. When recording in DUAL mode, additional information for PART1 is
sent on 9ch and additional information for PART2 is sent on 10ch.
‘ PLAYING BACK RECORDED PARTS SEPARATELY
5
RECORDER
When selecting a song recorded with two parts, it is possible to playback PART1 and PART2 separately.
First hold the PLAY/STOP button. If LED indicators corresponding to PART1 and PART2 turn on, both parts have been
recorded successfully. Releasing the PLAY/STOP button will begin playing PART1 and PART2 simultaneously.
… Step 1
Press and hold the PLAY/STOP button, then press the SOUND SELECT button that corresponds to either
PART1 or PART2.
2
1
Hold down the button
The LED indicator will turn off accordingly, indicating that the part will not be played back.
The song will begin playback when the PLAY/STOP button is released.
Page
37
3) ERASING A SONG
This function allows any songs that are no longer listened to, to be cleared.
… Step 1
Press and hold the REC and PLAY/STOP buttons.
The LED indicators will display which songs have been recorded.
… Step 2
While holding the REC and PLAY/STOP buttons, select the desired song to be erased by pressing the
corresponding SOUND SELECT button.
The LED indicator of the selected song will start to flash.
… Step 3
While still holding the REC and PLAY/STOP buttons, select the desired PART to be erased by pressing the
corresponding SOUND SELECT button.
3
1
Hold down the both buttons
The LED indicator of the selected PART will turn off, indicating that the part has been erased.
In the diagram above, PART1 of Song 2 is erased.
When both PART1 and PART2 of a song are erased, the song becomes empty. Selecting the song only, without
selecting PART1 and/or PART2, will not erase it.
„ Repeat the steps above in order to erase a number of songs and parts.
„ To erase all songs from memory at once, first turn off the power and then turn it on again, holding down both the REC
button and the PLAY/STOP button.
RECORDER
2
5
Page
38
6. USB OPERATIONS
The CN33 digital piano allows recorder songs to be loaded from and saved to a USB memory device.
It is also possible to play songs directly, delete files, and to format the USB memory device.
1) USB PLAY
The USB Play function is used to play songs directly from a USB memory device, without loading it into one of the
instrument’s internal recorder memories.
The USB Play function recognises SMF (Standard MIDI File) format songs, however as the CN33 does not contain
the full General MIDI/GM2 sound bank selection, some SMF song files may not be reproduced entirely accurately
when played through the instrument.
… Step 1
After connecting a USB device, press the USB button.
… Step 2
Press the S or T VALUE buttons to select the USB Play function, then press the YES button.
6
USB OPERATIONS
… Step 3
Press the S or T VALUE buttons to select the song to PLAY, then press the PLAY/STOP button.
The selected song will start to play.
„ CN33 format songs will be shown in the LCD display as U01, U02...U99. etc.
„ SMF format songs will be shown in the LCD displayed as 001, 002... 999, etc.
If the PLAY/STOP button is pressed and held for a few second, the USB Play function will enter ‘Chain Play’ mode,
first playing the selected song, then advancing automatically to the next song in numerical order.
„ While the song is playing, press the S or T VALUE buttons to increase/decrease the playback volume, and the YES
or NO buttons to fast forward or rewind the playing position.
… Step 4
Press the USB button to exit the USB Play function and return to normal operation.
Page
39
2) USB LOAD
The USB Load function allows recorder songs stored on a USB memory device to be loaded into the instrument’s
internal memory.
… Step 1
After connecting a USB device, press the USB button.
… Step 2
Press the S or T VALUE buttons to select the USB Load function, then press the YES button.
… Step 3
Press the S or T VALUE buttons to select the song to be loaded into internal memory.
… Step 4
Select a song
„ Up to 3 different songs can be loaded and stored in internal memory.
„ Any existing recorder song data will be replaced by the loaded song.
„ After loading a song, please follow the ‘5-2 PLAYING BACK A SONG’ instructions on pp.36
… Step 5
Press the USB button to exit the USB Load function and return to normal operation.
USB OPERATIONS
Press the Song button to select the location (song number) that the song will be loaded into,
then press the YES button.
6
Page
40
3) USB SAVE
The Save Song function allows recorder songs stored in the instrument’s internal memory to be saved to a USB
memory device.
… Step 1
After connecting a USB device, press the USB button.
… Step 2
Press the S or T VALUE buttons to select the USB Save function, then press the YES button.
… Step 3
Press the Song button to select the recorder song to be saved to a USB memory device.
If the selected recorder song contains song data, the button LED will flash.
Select a song
… Step 4
6
USB OPERATIONS
Press the S or T VALUE buttons to select the desired number for the song, then press the YES button.
Overwriting the file:
If the song number already exists, ‘Sur’ will be shown in the display.
Press the YES button to confirm the song save operation, or the NO button to cancel.
„ The saved song file will be stored in the root folder of the USB memory device.
It is not possible to store the song file in a different folder.
„ Renaming or re-saving the song file using a computer may prevent the song from being loaded into the instrument’s
internal memory.
… Step 5
Press the USB button to exit the USB Save function and return to normal operation.
Page
41
4) USB DELETE
The Delete function allows song files stored on a USB memory device to be deleted.
… Step 1
After connecting a USB device, press the USB button.
… Step 2
Press the S or T VALUE buttons to select the USB Delete function, then press the YES button.
… Step 3
Press the S or T VALUE buttons to select the file to be deleted, then press the YES button.
… Step 4
The selected song will be deleted.
… Step 5
Press the USB button to exit the USB Delete function and return to normal operation.
USB OPERATIONS
A confirmation message will be shown in the display.
Press the YES button to confirm the song delete operation, or the NO button to cancel.
6
Page
42
5) USB FORMAT
The Format function allows a USB memory device to be formatted, erasing all stored data.
… Step 1
After connecting a USB device, press the USB button.
… Step 2
Press the S or T VALUE buttons to select the USB Format function, then press the YES button.
… Step 3
An initial confirmation message will be shown in the display.
Press the YES button to confirm the format operation, or the NO button to cancel.
6
USB OPERATIONS
A second confirmation message will be shown in the display.
Press the YES button again to confirm the format operation, or the NO button to cancel.
The connected USB device will be formatted, erasing all stored data.
… Step 4
Press the USB button to exit the USB Format function and return to normal operation.
Page
43
7. FUNCTION BUTTONS
The function settings are responsible for controlling various advanced parameters within the CN33 digital piano,
and can be selected by pressing a combination of buttons.
‘ ENTERING A FUNCTION MODE
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press one of the other panel buttons shown below.
Lower Octave Shift
Lower Pedal On/Off
Damper Hold On/Off
Damper Effect
String Resonance
Touch Curve
Four Hands On/Off
Tuning
Temperament
MIDI Channel
Transmit Program Change On/Off
Local Control On/Off
Multi-Timbral Mode On/Off
Channel Mute
Send Program Change Number
User Memory
Factory Reset
1
2
Hold down both buttons
The LED indicator for the corresponding button will start to flash, indicating that the function is selected.
… Step 1
Press any of the panel buttons shown below.
The LED indicator for the button will stop flashing and return to its normal state.
When the power is turned off, settings will be reset to the factory default value.
FUNCTION
BUTTONS
‘ EXITING A FUNCTION MODE
7
Page
44
1) LOWER OCTAVE SHIFT
This function allows the lower part to be raised by one, two, or three octaves when using SPLIT mode.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the CONCERT MAGIC button.
1
2
Hold down both buttons
The display will alternate between showing ‘Lot’ (Lower Octave) and a number, representing how many octaves
the lower part is shifted up.
… Step 2
Press the S or T VALUE buttons to set the desired lower octave shift range.
Lower Octave Shift
Lower Octave Shift can be set from 0 to 3.
7
FUNCTION
BUTTONS
„ The CN33 digital piano’s lower octave shift setting defaults to ‘0’ each time the power is turned on.
Page
45
2) LOWER PEDAL ON/OFF
This function determines whether or not pressing the damper pedal will also sustain the Lower section sounds
when in SPLIT mode. The default setting is off, which means the sustain pedal is not active for lower part sound.
The sustain pedal will still be active for the upper sound.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the LESSON button.
2
1
Hold down both buttons
The display will alternate between showing ‘LPd’ (Lower Pedal) and on/off status. The default is off.
… Step 2
Press the S or T VALUE buttons to toggle lower pedal on and off.
Lower Pedal
OFF
ON
FUNCTION
BUTTONS
„ The CN33 digital piano’s lower pedal setting defaults to ‘OFF’ each time the power is turned on.
7
Page
46
3) DAMPER HOLD ON/OFF
This determines if the sound such as organ or strings should be held (on) or gradually decayed (off) when the
damper pedal is depressed.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the PIANO 1 button.
2
1
Hold down both buttons
The display will alternate between showing ‘dMP’ (Damper) and on/off status. The default is off.
… Step 2
Press the S or T VALUE buttons to toggle damper hold on and off.
Damper Hold
7
FUNCTION
BUTTONS
OFF
ON
Page
47
4) DAMPER EFFECT
When the damper pedal is depressed on an acoustic piano, all dampers are lifted up, allowing the strings to vibrate
freely. When a note or chord is played on the piano with the damper pedal depressed, not only will the strings of
the notes played vibrate, but also the strings of other notes, vibrating in sympathetic resonance. The Damper Effect
function of the CN33 digital piano attempts to simulate this phenomenon.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the PIANO 2 button.
2
1
Hold down both buttons
The display will alternate between showing ‘dEF’ (Damper Effect) and a number that represents the value.
… Step 2
Press the S or T VALUE buttons to select the desired setting.
Damper Effect
1
10
FUNCTION
BUTTONS
OFF
7
Page
48
5) STRING RESONANCE
String Resonance refers to a phenomenon present among acoustic pianos, whereby the strings of held notes
resonate ‘sympathetically’ with other notes of the same harmonic series. The String Resonance function of the
CN33 digital piano attempts to simulate this phenomenon.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the ELECTRIC PIANO button.
2
1
Hold down both buttons
The display will alternate between showing ‘Str’ (String Resonance) and a number that represents the volume.
… Step 2
Press the S or T VALUE buttons to set the volume within a range of ‘Off’, 1 to 10.
String Resonance
OFF
1
10
5 is the default setting.
String resonance will not be active when ‘Off’ is selected.
„ About string resonance
Even when the sustain pedal is not depressed on an acoustic piano, the strings for any notes held will be un-damped
and will resonate freely in sympathy with the strings of other notes that are played if they are part of the same harmonic
series. In addition, adjacent notes will also be resonated. The string resonance function simulates this phenomenon.
This is called “string resonance.”
For example, when you play the keys shown below while holding down the C key, the string of the C key resonates and
produces a sound.
(Quietly press and hold down the C key, and then quickly tap each of the keys shown below. It should be possible to hear
the string resonate.)
7
B
B
FUNCTION
BUTTONS
D
C
FG
B
FG
C
G
C
E
G
CDE
G
C
Hold down the key
„ When a key is played while holding down an adjacent key, an acoustic piano produces a sound as a result of string
resonance. The CN33 digital piano simulates this phenomenon.
„ The string resonance volume defaults to ‘5’ each time the power is turned off.
„ String resonance is not active when the sustain pedal is depressed.
„ The string resonance function is effective only for the acoustic piano sounds.
Page
49
6) TOUCH CURVE
The TOUCH function allows different touch sensitivities for the keyboard to be selected, other than the standard
touch of an acoustic piano. The sensitivity can be changed to one of five different types: Light 2, Light 1, Heavy
1, Heavy 2 or Off.
cLight 2
dLight 1
eNormal
fHeavy 1
gHeavy 2
hOff
: For players with a delicate touch. Requires less striking
force to achieve a forte note.
: For those still developing finger strength. A louder
volume is produced even when playing with a soft touch.
: Reproduces the standard touch sensitivity of an acoustic
piano.
: Perfect for those with strong fingers. Requires a heavier
touch to produce a loud volume.
: Requires more striking force to achieve a loud volume.
: A constant volume is produced regardless of how hard
the keys are struck. This setting is suitable for sounds
that have a fixed dynamic range such as Organ and
Harpsichord.
Loud
Sound
volume
Soft
Gentle
Strong
Force
applied to
the keys
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the DRAWBAR button.
2
1
Hold down both buttons
… Step 2
Press the S or T VALUE buttons to select the desired TOUCH type.
Heavy 2
Heavy 1
Normal
Light 1
Light 2
Off
„ The touch setting is global for all of the internal sounds. It is not possible to have individual touch settings for each
internal sound.
„ When the power is turned off, the touch settings will return to the default setting of ‘Normal’.
„ Note: LIGHT and HEAVY do not represent the physical weight of the keys. The touch type affects the sensitivity of the
keys, determining the volume level in response to the key movement.
FUNCTION
BUTTONS
The currently selected touch type will be shown in the LED display.
7
Page
50
7) FOUR HANDS ON/OFF
This function allows FOUR HANDS mode to be activated or deactivated using an alternative method.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the CHURCH ORGAN button.
2
1
Hold down both buttons
The display will alternate between showing ‘4Hn’ (FOUR HANDS) and on/off status. The default is off.
… Step 2
Press the S or T VALUE buttons to toggle FOUR HANDS on and off.
FOUR HANDS
7
FUNCTION
BUTTONS
OFF
ON
Page
51
8) TUNING
The TUNING function allows the CN33 digital piano’s pitch to be finely adjusted, and may prove useful when
playing with other instruments.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the HARPSI & MALLETS button.
2
1
Hold down both buttons
The display will alternate between showing ‘tun’ (Tuning) and a number representing the pitch for ‘A’ in Hz
(Hertz).
… Step 2
Press the S or T VALUE buttons to raise or lower the pitch.
Tuning
=
427.0 ~ 453.0
The pitch will increase or decrease by 0.5 Hz increments each time one of the VALUE buttons is pressed.
The range of adjustment is from 427.0 to 453.0 Hz (displayed as 27.0 – 53.0).
The factory default value is set to the modern standard A = 440.0 Hz (displayed as 40.0).
„ When pressing a key while using tuning mode, the sound that was selected prior to entering tuning mode will be heard.
To use a different sound while tuning, first exit the tuning mode, select the desired sound, then repeat ‘Step 1’ and ‘Step
2’ again.
FUNCTION
BUTTONS
„ When the power is turned off, tuning settings will reset to the factory default value of 440.0 Hz (displayed as 40.0).
7
Page
52
9) TEMPERAMENT
The CN33 digital piano offers immediate access to a variety of musical temperaments popular during the Renaissance
and Baroque periods. It may prove interesting and educational to experiment with different temperaments, other
than the modern ‘equal temperament’ standard this is dominant in music today.
BRIEF EXPLANATION OF TEMPERAMENTS
EQUAL TEMPERAMENT
(PIANO ONLY)
MERSENNE PURE TEMPERAMENT
(MAJOR)
MERSENNE PURE TEMPERAMENT
(MINOR)
PYTHAGOREAN TEMPERAMENT
MEANTONE TEMPERAMENT
WERCKMEISTER III TEMPERAMENT
KIRNBERGER III TEMPERAMENT
EQUAL TEMPERAMENT (FLAT)
7
FUNCTION
BUTTONS
EQUAL TEMPERAMENT
This is the default temperament. If a piano sound is selected the tuning is
stretched like an acoustic piano (EQUAL TEMPERAMENT). If any other type of
sound is selected the tuning will be EQUAL (FLAT). An explanation of EQUAL
TEMPERAMENT and EQUAL TEMPERAMENT (FLAT) is provided later in this
section.
If a piano sound is used in a layer with any other sound, then both sounds will
use the EQUAL TEMPERAMENT (stretched) tuning.
This temperament, which eliminates dissonances for thirds and fifths, is still
popular for choral music because of its perfect harmony.
Performers must be aware which key they are playing in when using this
temperament.
Any key modulation will result in dissonances. When playing music in a particular
key, the key of the temperament must also be correctly matched.
When playing in a major key select Pure (Major) and when playing in a minor
key select Pure (minor).
This temperament, which uses mathematical ratios to eliminate dissonance
for fifths, is very limited for use with chords, but it produces very characteristic
melodic lines.
This temperament, which uses a mean between a major and minor whole tone to
eliminate dissonance for thirds, was devised to eliminate the lack of consonances
experienced with certain fifths for the Mersenne pure temperament. It produces
chords that are more beautiful than those with the equal temperament.
These two temperaments are placed in between Meantone and Pythagorean.
For music with few accidentals, this temperament produces the beautiful chords
of the mean tone, but as accidentals increase, the temperament produces the
characteristic melodies of the Pythagorean temperament. It is used primarily for
classical music written in the Baroque era to revive the original characteristics.
This is an ‘unstretched’ equal temperament that divides the scale into twelve equal
semitones. This produces the same chordal intervals in all twelve keys, and has
the advantage of limitless modulation of the key. However the tonality of each
key becomes less characteristic and no chord is in pure consonance.
This is the most popular piano temperament. The hearing ability of a human is
uneven and is not as accurate with high frequency and low frequency as it is
with the middle range. This temperament’s tuning is stretched to compensate
for this so the sound will be heard naturally to the ears. This ‘stretched’ equal
temperament is a practical variation of the ‘unstretched’ equal temperament
which was invented on a mathematical basis.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the STRINGS button.
2
1
Hold down both buttons
The display will alternate between showing ‘tMP’ (Temperament) and a symbol to indicate which type of temperament
is in use.
Page
53
… Step 2
Press the S or T VALUE buttons to change the type of temperament.
Temperament
Equal (Piano)
Pure (Major)
Pure (Minor)
Pythagorean
Meantone
Equal
Equal (Flat)
Kirnberger III
Werckmeister III
When the power is turned off, the temperament will reset to the factory default ‘equal temperament (piano only)’
type.
If a piano sound is selected when using the factory default ‘equal temperament (piano only)’ type, the tuning is
stretched like an acoustic piano (EQUAL TEMPERAMENT). If any other type of sound is selected, the tuning will
be EQUAL (FLAT).
„ After selecting the desired temperament, please read the following section on selecting a key signature for the temperament
before continuing.
‘ KEY SIGNATURE OF TEMPERAMENT
Limitless modulation of the key became available only after the invention of equal temperament. When using a
temperament other than equal temperament, care must be taken to choose the key signature to play in. For example,
if the song to be played is written in D major, ‘D’ would be chosen as the temperament key.
… Step 1
The note name of the key pressed will be shown in the display and chosen as the key of the temperament.
„ Changing the key of the temperament will only change the ‘balance’ of the tuning, the pitch of the keyboard will remain
unchanged. Use the TUNING or TRANSPOSE functions to change the pitch of the whole keyboard.
„ The key of the temperament function will have no effect when equal temperament is selected.
C
D#
F#
A
C#
E
G
A#
D
F
G#
B
FUNCTION
BUTTONS
Press one of the 88 piano keys to select the key signature of the temperament.
7
Page
54
‘ MIDI OVERVIEW
The term MIDI is an acronym for Musical Instrument Digital Interface, an international standard for connecting
synthesizers, sequencers (MIDI recorders) and other electronic instruments so that they can exchange
performance data.
The CN33 is equipped with two MIDI jacks for exchanging data: MIDI IN and MIDI OUT. Each uses a special
cable with a DIN connector.
„MIDI IN : For receiving note, program change and other data.
„MIDI OUT : For sending note, program change and other data.
MIDI uses channels to exchange data back and forth between MIDI devices. There are receive (MIDI IN) and
transmit (MIDI OUT) channels. Most musical instruments or devices with MIDI functions are equipped with
both MIDI IN and OUT jacks and are capable of transmitting and receiving data via MIDI.
The receive channels are used to receive data from another MIDI device and the transmit channels are used
to transmit data to another MIDI device.
„ Connection to an external sequencer
When connected as shown in the illustration below, songs played on the CN33 can be recorded using a MIDI
recorder, with internal sounds (such as piano, harpsichord and vibraphone, etc.) controlled by the CN33’s
MULTITIMBRAL MODE function to create a multi-layer MIDI recording.
MIDI OUT
MIDI IN
MIDI OUT
MIDI IN
7
FUNCTION
BUTTONS
‘ CN33 MIDI functions
Transmit / receive keyboard
note information
By transmitting MIDI data from the CN33 digital piano (MIDI out) a MIDI-connected
keyboard can be played from the CN33 digital piano. Or alternatively, by receiving
data (MIDI IN), the CN33 digital piano can be played from another MIDI-connected
keyboard or device.
Transmit / receive channel
setting
Specify transmit/receive channels within the range of 1 to 16.
Transmit / receive Program
change (sound type) number
Transmit/receive program change data to/from a MIDI-connected musical instrument
or device.
Transmit / receive pedal data
Transmit/receive sustain pedal and sustain pedal data from a MIDI-connected musical
instrument or device. Sostenuto pedal data can also be transmitted.
Receive volume data
The CN33 digital piano will respond to MIDI volume data sent from a MIDI-connected
musical instrument or device.
Multi-timbral setting
The CN33 digital piano is able to receive multiple channel MIDI data from a MIDIconnected musical instrument or device, when multi-timbral mode is turned on.
Transmit / receive exclusive
data
Transmit/receive front panel or menu function settings as exclusive data.
Transmit recorder playback
data
Songs recorded using the recorder can be played back from a MIDI-connected
musical instrument or recorded by an external sequencer via the MIDI OUT jack.
Please refer to the ‘MIDI implementation chart’ (page 63) for further information regarding the CN33 digital
piano’s MIDI functions.
Page
55
10) MIDI CHANNEL
This function is used to determine on which MIDI channel the CN33 digital piano will exchange MIDI information
with external MIDI devices and instruments or a personal computer.
The selected channel will function as both the transmit and receive channel.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the CHOIR & PAD button.
2
1
Hold down both buttons
The display will alternate between showing ‘Chn’ (Channel) and the channel number. The default channel is 1.
… Step 2
Press the S or T VALUE buttons to change the channel number.
MIDI Channel
The channel number can be set from 1 to 16.
FUNCTION
BUTTONS
„ The CN33 digital piano’s MIDI channel setting defaults to receiving MIDI channel information from all channels, 1 to 16.
each time the power is turned on. This is called ‘omni mode on’. The CN33 digital piano will switch to ‘omni mode off’
when a specific channel is selected using the MIDI channel function, and data will only be received on that specified
channel. In order to specify channel 1 in the ‘omni mode off’ state, first select channel 2, then select channel 1.
7
Page
56
11) TRANSMIT PROGRAM CHANGE ON/OFF
This function determines whether or not the CN33 digital piano will transmit program change information when
pressing the SOUND SELECT buttons. When transmit program change is turned on, pressing the SOUND SELECT
buttons will send the program change numbers as listed below.
Sound Button
PIANO 1
PIANO 2
ELECTRIC PIANO
DRAWBAR
CHURCH ORGAN
HARPSI & MALLETS
STRINGS
CHOIR & PAD
7
FUNCTION
BUTTONS
BASS
Sound Name
Concert Grand
Studio Grand
Mellow Grand
Modern Piano
Concert Grand 2
Studio Grand 2
Mellow Grand 2
Rock Piano
Classic E.Piano
Modern E.P.
60’s E.P.
Modern E.P. 2
Jazz Organ
Drawbar Organ
Drawbar Organ 2
Be 3
Church Organ
Diapason
Full Ensemble
Diapason Oct
Harpsichord
Harpsichord 2
Vibraphone
Clavi
Slow Strings
String Pad
Warm Strings
String Ensemble
Choir
Choir 2
New Age Pad
Atmosphere
Wood Bass
Finger Bass
Fretless Bass
W. Bass & Ride
Off, On1
Prog #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Multi-Timbral mode
On2
Bank MSB
Bank LSB
121
0
121
1
121
2
121
0
95
16
95
17
95
18
121
1
121
0
121
0
121
3
121
1
121
0
121
0
121
1
95
2
121
0
95
7
95
1
95
6
121
0
121
3
121
0
121
0
95
1
95
8
95
1
121
0
121
0
95
53
121
0
121
0
121
0
121
0
121
0
95
1
Prog #
1
1
1
2
1
1
1
2
5
6
5
6
18
17
17
17
20
20
21
20
7
7
12
8
45
49
49
49
53
54
89
100
33
34
36
33
Page
57
In addition to the SOUND SELECT buttons, other button operations such as touch curve, dual, digital effects and
reverb settings can be transmitted as MIDI exclusive data when the corresponding buttons are pushed.
When set to off, no program change or other panel information will be transmitted via MIDI.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the BASS button.
2
1
Hold down both buttons
The display will alternate between showing ‘PGM’ (Program) and on/off status. The default is on.
… Step 2
Press the S or T VALUE buttons to toggle transmit program change on and off.
Transmit Program Change
OFF
ON
FUNCTION
BUTTONS
Program change numbers will also be transmitted when multi-timbral mode is on.
When using DUAL mode, on/off information and sound type settings are transmitted as exclusive data, but program
change numbers will not be transmitted.
The CN33 digital piano’s transmit program change setting defaults to ‘ON’ each time the power is turned on.
7
Page
58
12) LOCAL CONTROL ON/OFF
This function determines whether the CN33 digital piano’s sound will be played from the piano’s keyboard (‘ON’)
or only from an external MIDI instrument (‘OFF’). Even with local control set to ‘OFF’ the piano’s keyboard will still
transmit to external MIDI devices and instruments or a personal computer.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the EFFECTS button.
2
1
Hold down both buttons
The display will alternate between showing ‘LcL’ (Local) and on/off status. The default is on.
… Step 2
Press the S or T VALUE buttons to toggle local control on and off.
Local Control
OFF
ON
7
FUNCTION
BUTTONS
„ When local control is set to ‘OFF’, there will be no sound heard when the keys are pressed.
„ The CN33 digital piano’s local control setting defaults to ‘ON’ each time the power is turned on.
Page
59
13) MULTI-TIMBRAL MODE ON/OFF
This function allows the CN33 digital piano to receive data on more than one MIDI channel simultaneously. In this
mode, the CN33 digital piano can play different musical parts with different sounds for each part.
With multi-timbral mode enabled, an external sequencer can be used to enjoy an ensemble performance playing
multiple sound types (multi-timbral) on a single CN33 digital piano.
¡ Multi-Timbral On (On1 and On2)
This turns on the flexible 16 part multi-timbral capability. Individual MIDI channels can be turned on and off, and
assigned any internal sound. The internal sound for each MIDI channel can be changed when the program change
number for the desired sound is received from external MIDI device and instruments or a personal computer. The
CN33 digital piano’s normal program change numbers are assigned in On1 (Please see page 49 for a list of the
program change numbers), and General MIDI program change numbers are assigned in On2.
¡ Multi-Timbral Off
This turns off the multi-timbral capability. Only one MIDI channel will be active and only the sound currently selected
will be heard when a MIDI signal is received.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the REVERB button.
2
1
Hold down both buttons
The display will alternate between showing ‘MLt’ (Multi) and on/off status. The default is off.
… Step 2
Press the S or T VALUE buttons to toggle multi-timbral on1, on2 and off.
Multi-timbral mode
ON1
ON2
When the multi-timbral mode is OFF and MIDI information is received, only the currently selected internal sound
will be heard.
When the multi timbral mode is ON, the internal sound that is heard corresponds to any program change number
that was received from external MIDI devices and instruments or a personal computer. This sound may be different
from the internal sound that is currently selected using the SOUND SELECT buttons on the panel.
When multi-timbral mode is ON, the ON/OFF setting for each individual MIDI receive channel can also be set
(See page 55).
„ The CN33 digital piano’s multi-timbral mode defaults to ‘OFF’ each time the power is turned on.
FUNCTION
BUTTONS
OFF
7
Page
60
14) CHANNEL MUTE
This function determines which MIDI channels are activated to receive MIDI information when multi-timbral mode
is set to ON. Each of the 16 channels can be individually activated or deactivated.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the SPLIT button.
2
1
Hold down both buttons
The display will alternate between showing ‘P01’ (Play 01) and ‘On’, indicating that the channel 1 is activated.
„ When multi-timbral mode is set to OFF, the ‘channel mute’ function can not be selected.
… Step 2
Press the S or T VALUE buttons to toggle channel mute on and off.
To turn the other channels on and off, use the 16 left-most white keys to select a desired channel. The display will
change to indicating the selected channel. Then use the value buttons to toggle channel mute on and off.
Channel
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
7
FUNCTION
BUTTONS
Press the key
Channel1
Channel16
OFF
ON
„ When changing the channel mute settings, no sound will be heard when the keys are pressed to select the individual
channels.
„ When the multi-timbral mode is first turned ON after the power has been turned on, all MIDI receive channels 1-16 will
be set to ‘ON’. This is the default setting.
Page
61
15) SEND PROGRAM CHANGE NUMBERS
This function allows the CN33 digital piano to send program change numbers beyond the 32 pre-defined numbers
transmitted by the SOUND SELECT buttons. Using this function, any number from 1 to 128 can be sent.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the TEMPO button.
2
1
Hold down both buttons
The display will alternate between showing ‘PG#’ (Program #) and a program change number.
… Step 2
Press the S or T VALUE buttons to change the program change number.
Program change number
… Step 3
FUNCTION
BUTTONS
Press both S and T VALUE buttons simultaneously to send the program change number.
7
Page
62
16) USER MEMORY
This function allows the CN33 digital piano to save the user-definable settings when the power is turned off.
Once written to the memory, the saved settings will be recalled every time the power is turned on.
The following settings can be saved.
¡ Sound type including starting sound and primary sound for each category.
¡ Effects/Reverb settings
¡ Menu function settings
¡ Touch
¡ Transpose
¡ Tempo, beat, and sound volume of the metronome
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the BEAT button.
Memory
User
2
1
Hold down both buttons
The display will alternate between showing ‘MEM’ (Memory) and ‘uSr’ (User).
… Step 2
Press the REC button to execute the save operation.
Write
The save operation is completed when the display shows ‘Wrt’ (Write).
… Step 3
7
FUNCTION
BUTTONS
When finished, press any one of the SOUND SELECT buttons to exit the menu.
Page
63
17) FACTORY RESET
This function will appear only when the user memory function has been used.
This function resets the CN33 digital piano to the factory settings.
All parameters you saved in ‘User Memory’ will be reset to the factory preset values.
… Step 1
Press and hold the TRANSPOSE and USB buttons, then press the Play /STOP button.
Memory
Reset
2
1
Hold down both buttons
The display will alternate between showing ‘MEM’ (Memory) and ‘rES’ (Reset).
… Step 2
FUNCTION
BUTTONS
Press the REC button to restore factory settings, and exit the menu.
7
Page
64
8. APPENDICES
‘ CONNECTING TO OTHER DEVICES
Caution
y Do not directly connect the LINE IN and LINE OUT jacks of the CN33 together with a cable.
An audio loop (oscillation sound) will occur, resulting in damage to the unit.
Computer
External MIDI devices
Amplifiers, Speakers, or similar
equipment
Audio equipment or
electronic instruments
1 MIDI JACKS
These jacks are used to connect external MIDI devices with the CN33 digital piano.
There are two terminals: MIDI IN and MIDI OUT.
2 USB JACK
This jack is used to connect with a personal computer and exchange MIDI data.
When the CN33 digital piano is connected to a computer via a commercially available USB cable, the CN33 digital
piano will be recognized as a MIDI device.
As with a regular MIDI interface, the CN33 digital piano will be able to transmit and receive MIDI messages.
There are A USB port and B USB port. Connect a computer to the A port and digital piano to the B port.
8
APPENDICES
3 LINE OUT JACKS
These jacks provide stereo output of the piano’s sound to amplifiers, tape recorders or similar equipment.
The audio signal coming through the LINE IN jacks is also routed to these jacks. The piano’s sound is mixed with
the LINE IN signals.
The CN33 digital piano’s MASTER VOLUME slider can control the output level of its own sound while it does not
control the LINE IN signal.
4 LINE IN JACKS
These jacks are used to connect a pair of stereo outputs from other audio equipment or electronic instruments to
the piano’s speakers.
The audio signal coming through these jacks bypasses the piano’s volume control. To adjust the volume level, use
the output control of the external device.
Page
65
‘ USB MIDI
The CN33 digital piano features a ‘USB to Host’ type connector, allowing the instrument to be connected to a
computer and utilised as a MIDI device. Depending on the type of computer and operating system installed,
additional driver software may be required for USB MIDI communication to function correctly.
Operating System
Windows ME
Windows XP (no SP, SP1, SP2, SP3)
Windows XP 64-bit
Windows Vista (SP1, SP2)
Windows Vista 64-bit (SP1, SP2)
Windows 7
Windows 7 64-bit
Windows 98 SE
Windows 2000
Windows Vista (no SP)
USB MIDI Driver Support
No additional USB MIDI driver software required.
The standard (built-in) Windows USB MIDI driver will be installed
automatically when the instrument is connected to the computer.
After driver installation, ensure that the ‘USB Audio Device’ (Windows ME/Windows
XP) or ‘USB-MIDI’ (Windows Vista/Windows 7) device is correctly selected in the
application software.
Additional USB MIDI driver software required.
Please download the USB MIDI driver from the KAWAI website:
f http://www.kawai.co.jp/english
After driver installation, ensure that the ‘KAWAI USB MIDI’ device is correctly selected
in the application software.
Windows Vista 64-bit (no SP)
USB MIDI is not supported.
Please upgrade to service pack 1 or service pack 2.
Mac OS X
No additional USB MIDI driver software required.
The standard (built-in) Mac OS X USB MIDI driver will be installed
automatically when the instrument is connected to the computer.
Mac OS 9
USB MIDI is not supported.
Please use the standard MIDI IN/OUT connectors.
USB MIDI INFORMATION
„ If the instrument’s MIDI IN/OUT jacks and USB MIDI
port are both connected simultaneously, the USB MIDI
port will be given priority.
„ Ensure that the instrument is turned off before
attempting to connect the USB MIDI cable.
„ When connecting the instrument to a computer using
the USB MIDI port, there may be a short delay before
communications begin.
„ If there are any further problems experienced with USB
MIDI communication while the instrument is connected,
please double-check all connections and relevant MIDI
settings in the computer’s operating system.
APPENDICES
„ If the instrument is connected to a computer via a USB
hub and USB MIDI communication becomes unreliable/
unstable, please connect the USB MIDI cable directly
to the one of the computer’s USB ports.
„ Disconnecting the USB MIDI cable suddenly, or turning
the instrument on/off while using USB MIDI may cause
computer instability in the following situations:
- while installing the USB MIDI driver
- while starting up the computer
- while MIDI applications are performing tasks
- while the computer is in energy saver mode
* ‘MIDI’ is a registered trademark of the Association of Manufacturers of Electronic Instruments (AMEI).
* ‘Windows’ is a registered trademark of Microsoft Corporation.
* ‘Mac’ and ‘Mac OS’ are registered trademarks of Apple Inc.
* Other company names and product names mentioned referenced herein may be registered trademarks or trademarks of respective owners.
8
Page
66
‘ ASSEMBLY INSTRUCTIONS
Caution
y Ensure that this instruction manual is read thoroughly before attempting to assemble the CN33
digital piano, and that two or more people work on assembly.
y It may be necessary to tilt the unit by 90 degrees while assembling the CN33 digital piano.
During this time, ensure that hands are not caught in the piano, keyboard lid, or score stand,
and that the piano is not dropped on an individual’s feet.
„ PARTS PROVIDED
Before attempting to assemble the CN33 digital piano unit, ensure that all parts are included. A Phillips-head
screwdriver will also be required to assemble the unit (not included).
(A) Piano (x 1)
(G)
(H)
(I)
(E)
(F)
(J)
(K)
(B) Pedal board (x 1)
Adjuster bolt I4 x 16 I4 x20 I4 x30 M6 x 25 Cord clamp Headphone hook and screws
(C) End panel (x 1 each for left and right)
(D) Back panel (x 1)
(E) Adjuster bolt (x 1)
(F) Screw: I4 x 16 (x 4) (Silver)
Screw
(G) Screw: I4 x 20 (x 4)
(x 2)
(H) Screw: I4 x 30 (x 4)
(I) Screw: M6 x 25 (x 4)
(J) Cord clamp (x 2)
(K) Headphone hook and screws (x 1 set)
(L) Power cord (x 1)
„ ASSEMBLY SEQUENCE
1
Caution
y Be careful not to scratch or damage the floor,
piano, or stand at the time of assembly.
1. Screw the adjuster bolt (E) into the threaded screw hole
provided in the base of the pedal board.
(E)
2. Attach the pedal board (B) and end panels (C), sliding the front
of the pedal board into the notch in the end panels. Ensure the
metal bracket on the base of the end panel slides beneath the
pre-attached screw in the pedal board.
Pre-attached screw
(F)
8
APPENDICES
3. Hold the pedal board (B) and end panels (C) together, then
tighten the pre-attached screws on the left and right sides.
Attach two additional screws (F) on each side, ensuring all
screws are fastened tightly and that there are no large gaps
between the assembled parts.
4. Unfasten and extend the pedal connection cable attached to
the bottom of the pedal board.
(F)
2y3
(C)
(B)
4y5
(H)*
(H)*
5. Attach the back panel (D) to the stand assembly using screws
(G) and (H) in the prepared holes. Loosely tighten the screws
with the * symbol.
(H)*
(D)
(G)
(G)
Unfasten and extend the pedal cable
(G)
(H)*
(G)
Page
67
6. Place the stand upright so that the backside of the stand
assembly rests against a wall, then slowly and carefully insert
the piano. Ensure that more than two people work on the
assembly. If attempting to insert the piano without resting the
stand against a wall, support the back of the stand using your
foot or leg to prevent the stand from sliding backwards.
Caution
y Ensure that the piano is not dropped on an
individual’s feet, and that fingers, hands and
feet are not caught in the piano.
6y7y8
(A)
(K)
(I)
(I)
7. Fasten the piano (A) to the stand with four screws (I).
Caution
y Ensure that the piano and the stand are
securely fastened together with the correct
screws to prevent the possibility of the
piano falling.
9 y 10
(J)
Protrusion
(J)
(H)*
8. Fix the headphone hook and screws (K) if desired.
9. Tightly fasten the screws (H) (with the * symbol in step 5).
10. Insert the connector of the pedal cord into the receptacle, and
fix the cord with the cord clamp (J).
11. Turn the adjustor bolt (E) at the bottom of the pedal stand until
the bolt firmly touches the floor, supporting the pedal board.
Caution
11
y Ensure that the adjuster bolt (E) firmly
touches the floor, supporting the pedal board
and preventing damage.
When moving the piano, shorten the adjustor
bold (E) and readjust after moving has been
completed.
(E)
12. Connect the power cable (K) to the AC IN terminal on the base
of the main body, then pass the cable through the back board
aperture, and out to the rear of the instrument.
12
13. Remove the protective film from the display.
13
APPENDICES
(L)
8
Page
68
‘ SPECIFICATIONS
„ Keyboard
88 keys, Responsive Hammer Action with Ivory Touch and Let-Off
„ Polyphony
Max. 96 notes
„ Number of Sound
36
„ Sound Categories
Piano 1, Piano 2, Electric Piano, Drawbar, Church Organ, Harpsi & Mallets, Strings, Choir & Pad, Bass
„ Effects
Reverb (Room1/2, Stage, Hall1/2), Chorus, Tremolo, Delay (1/2/3), Rotary (1/2)
„ Temperaments
Equal (Piano Only), Mersenne pure (Major), Mersenne pure (minor), Pythagorea, Meantone,
Werckmeister III, Kirnberger III, Equal (flat), Equal
„ Other Features
Demo (30 Preset Songs), Concert Magic (88 Preset Songs), Volume, Dual, Split, Four Hands, Balance
Slider, Transpose, Tune, Lower Octave Shift, Lower Pedal On/Off, Touch Curve (Light 1, Light 2,
Normal, Heavy 1, Heavy 2, Off), MIDI (16 part multi-timbral capability), Damper Hold, Damper Effect,
String Resonance, User Memory, Factory Reset
„ Lesson Function
Right/left part balance adjustable, tempo adjustable.
8
APPENDICES
* Please refer to the separate ‘Concert Magic & Lesson Song Lists’ booklet for a complete listing of available lesson songs.
„ Recorder
2 tracks, 3 songs - total memory capacity approximately 15,000 notes.
„ Metronome
Time signatures: 1/4, 2/4, 3/4, 4/4, 5/4, 3/8, 6/8
Tempo: 10-400 BPM
„ USB Functions
SMF song player, Save user Song, Load user Song,Delete, Format
„ Pedals
Damper (half-pedalling supported), Soft, Sostenuto
„ Jacks
Headphones x 2, LINE IN (L, R), LINE OUT (L/MONO, R), MIDI (IN, OUT), USB to Host, USB to
Device
„ Output Power
20 W x 2
„ Speakers
16 cm x 2
„ Key Cover
Sliding type
„ Power Consumption
45 W
„ Dimensions
1380 (W) x 470 (D) x 880 (H) mm (with music rack flattened)
„ Weight
54 kg
Page
69
‘ MIDI EXCLUSIVE DATA FORMAT
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th byte
9th byte
9th byte
10th byte
1
2
3
4
5
6
7
8
9
10
F0 ..........................Start code
40...........................KAWAI’s ID number
00 - 0F ...................MIDI channel
10, 30.....................Function code (30 when setting MULTI TIMBRE ON/OFF)
04...........................Indicates that the instrument is Electronic Piano
02...........................Indicates that the piano is one of ‘CA’ or ‘CN’ series
data 1
data 2.....................(See the table below.)
data 3
F7 ..........................End code
data 1
data 2
data 3
Function
00
00
----------
Multi Timbre Off
00
01
----------
Multi Timbre On 1
00
02
----------
Multi Timbre On 2
0D
00-07
----------
00: Effect Off, 01: Chorus, 02: Delay 1, 03: Delay 2, 04: Delay 3,
05: Tremolo, 06: Rotary 1, 07: Rotary 2
0E
00-03, 06, 07
----------
00: Reverb Off, 01: Room 2, 02: Stage, 03: Hall 1, 06: Room 1,
07: Hall 2
14
00-7F
----------
Dual/Split balance
16
1F-60
----------
Tune, 40: 440 Hz
17
00, 7F
----------
00: Program Change Off, 7F: Program Change On
18
00-05
----------
00: Light 1, 01: Normal, 02: Heavy 1, 03: Off, 04: Light 2, 05: Heavy 2
19
00-03
----------
Lower Octave Shift
20
00-23
00-23
Dual, data 2: Main sound, data 3: Layer sound
21
00-23
00-23
Split, data 2: Upper sound, data 3: Lower sound
22
00-23
00-23
Four Hands, data 2: Right sound, data 3: Left sound
25
00-08
00-0B
data 2: Temperament, data 3: Key
26
00, 7F
00-0F
Multi Timbre, data 2: 00 (On), 7F (Off), data 3: channel
APPENDICES
1
2
3
4
5
6
7
8
9
10
8
Page
70
‘ MIDI IMPLEMENTATION CHART
KAWAI DIGITATL PIANO
MODEL : CN33
Date : November 2008
Version : 1. 0
Function
Remarks
Default
Changes
1
1 - 16
1
1 - 16
Mode
Default
Messages
Altered
3
°
ÄÄÄÄÄÄÄÄÄ
1
1, 3*
°
* The default for the
OMNI mode is ON.
Specifying MIDI
channels automatically
turns it OFF.
True voice
9 - 120**
ÄÄÄÄÄÄÄÄÄ
0 - 127
0 - 127
** The value depends on
the Transpose setting.
Velocity
Note ON
Note OFF
After touch
Key’s
Channel’s
{ 9nH v=1-127
° 9nH v=0
Pitch bend
0,32
7
11
64
66
67
Control change
Program change
True #
System exclusive
APPENDICES
Receive
Basic channel
Note number
8
Transmit
{
°
°
°
°
°
°
°
{
°
°
{ (Right pedal)
{ (Center pedal)
{ (Left pedal)
{
{
{
{
{
{
{ 0 - 127
ÄÄÄÄÄÄÄÄÄ
{***
{
{
Common
Song Position
Song Select
Tune
°
°
°
°
°
°
System
Real time
Clock
Commands
°
°
°
°
Aux
Local On/Off
All notes Off
Active Sense
Reset
°
°
{
°
{
{ (123 - 127)
{
°
Bank select
Volume
Expression pedal
Sustain pedal
Sostenuto pedal
Soft pedal
*** See the Program
Change Number
Mapping in page 51.
On/Off Selectable
Notes
Mode 1: omni mode On, Poly, Mode 2: omni mode On, Mono
Mode 3: omni mode Off, Poly, Mode 4: omni mode Off, Mono
{: Yes
°: No
CN33 Owner’s Manual
KPSZ-0324 : 816781
OW1036E-I1001
Version 1
Printed in Indonesia
Copyright © 2010 KAWAI Musical Instruments Mfg. Co.,Ltd. All Rights Reserved.