Logitech UE9000 Headphones User Manual

Add to my manuals
17 Pages

advertisement

Logitech UE9000 Headphones User Manual | Manualzz

9000

WIRELESS

HEADPHONES

USER

无线耳机

用户指南

ENGLISH

4

简体中文

16

Turn on the UE 9000

Wireless Headphones.

Turn on your Ultimate Ears 9000

Wireless Headphones

The Bluetooth® LED should blink blue rapidly, indicating that the headphones are discoverable

Pair your headphones with your Bluetooth-enabled device.

Apple iOS®

Go to Settings > General > Bluetooth

Turn on Bluetooth

Select “UE 9000” from “Devices ”

Optional: Pair additional Bluetooth-enabled devices.

You can pair your headphones with up to eight devices To do so:

1 Move the slider to the “Bluetooth” position and hold it there until the Bluetooth LED blinks rapidly blue, indicating that the headphones are discoverable

2 Complete pairing according to the instructions on the previous page

3 Press play on the device you’ve just paired

When you’ve successfully paired a device, the Bluetooth LED will turn solid blue

If pairing times out (the LED will blink slowly), move the slider to the “Bluetooth” position and hold it there until the LED starts rapidly blinking again

WHAT’S IN

THE BOX:

UE 9000 Wireless Headphones

Molded travel case

Optional audio cable with on-cord mic and controls

USB charging cable

AC adapter

¼-inch (6 35 mm) adapter

Microfiber polishing cloth

On/Off/Bluetooth connection slider

Bluetooth LED

Battery level LED

Music/Calling

On-ear controls

Volume up

Play/Pause

Call answer/hang up

Next track

Previous track

Volume down

On-cord controls

Click, or press and hold

Single click

Single click to answer/ press and hold to hang up

Double click

Triple click

Click, or press and hold

Listen Through button

Micro USB charging port

3 5 mm input (Interrupts Bluetooth connection when connected)

FEATURES:

LED BEHAVIOR.

Bluetooth LED

Off

Headphones off or connected to an audio source via the 3 5 mm jack

Blue (blinking rapidly):

Discoverable/pairing mode

Blue (blinking slowly): Connecting

Blue (solid): Connected

Battery Level LED

Green (pulsing slowly): Charging

Green (solid): Power on; fully charged

Red: Low battery

FEATURES:

CHARGING.

Micro USB charging port USB charging cable

Computer USB port or

AC power adapter

When in wireless mode, all LEDs turn off automatically However, the LEDs will illuminate when there is a pairing change or a control is activated

To use the “listen through” feature, press the Listen Through button once Your music will be muted and environmental sounds will be amplified into your headphones To resume listening to music, simply press the Listen Through button again

The “listen through” feature is only available in wireless mode while listening to music

It is not available in wired mode or during phone calls

Typically a three-hour charge through an AC outlet provides up to 10 hours of power, and you can use your headphones while they’re charging

When the battery level LED turns red, you should recharge your headphones To do so:

1 Charge the headphones via the supplied AC adapter or USB The battery level LED will pulse green

2 When your headphones are fully charged, the battery level LED will glow

solid green

ENGLISH - 9

FEATURES:

TRAVEL STORAGE.

PRODUCT CENTRAL.

There’s more information and support available for your product online.

Visit Product Central, where you can:

• Browse online articles and tutorials.

• Find tips about usage and information about additional features.

• Get help troubleshooting a problem.

• Download the latest software for your product.

• Find online documentation and warranty information.

• Connect with other users in our Community Forums to get advice, ask questions and share solutions

• Order spare parts (when available).

Go to www.logitech.com/support/ue9000

To safely store your headphones while you’re on the go:

1 Swivel the ear cups until they “click”

2 Place the headphones flat in their case

3 Place the AC adapter in the top pocket

4 Place all cables and accessories in the bottom pocket

ENGLISH - 11

TROUBLESHOOTING.

WHAT DO YOU THINK?

If your headphones are not working or pairing/connecting properly, try the following:

• Move closer The range of the Bluetooth wireless connection is up to 10 meters or 30 feet

• Recharge, particularly if the battery level LED is red See “Charging ”

• Try increasing the volume on the headphones, on your device or in your media application And if you’re connected to a computer, check the volume settings for your operating system

• Enable Bluetooth on your device, and then select “UE 9000” from the Bluetooth device list

• To fix a Bluetooth connection by repairing:

1 On your device: Delete “UE 9000” from the Bluetooth device list

2 On the headphones: Move the slider to “Bluetooth” and hold until the Bluetooth LED blinks blue

3 On your device: Select “UE 9000” from the Bluetooth device list

4. From the media player on your Bluetooth device: Select “UE 9000”

• For computers, you may need to specify the headphone as the input/output

device for your operating system

For help, go to www.logitech.com/support/ue9000

Please take a minute to tell us www.logitech.com/ithink

PRODUCT SUPPORT.

www.logitech.com/support/ue9000

ENGLISH - 13

BATTERY REMOVAL

AND RECYCLING

1 Peel and remove the ear pad from the left ear cup

2 Remove screws to disassemble the speaker chamber

3 Unplug the old battery

4 Dispose of old battery at an authorized battery recycling center

HEADPHONE

DISASSEMBLY

Remove screws

Unplug battery

Peel and remove earpad

LEFT EAR CUP

ENGLISH - 15

打开电源

开启 UE 9000

无线耳机。

开启您的 Ultimate Ears 9000

无线耳机。

蓝牙® LED 指示灯应快速闪烁蓝灯,

表示耳机处于可被搜索状态。

设备配对 按下播放

按下媒体设备上的播放键。

将您的耳机与蓝牙设备配对。

苹果iOS®设备

转到“设置”>“通用”>“蓝牙”。

开启蓝牙。

从“设备”选择“UE 9000”。

可选: 与更多支持蓝牙的设备配对

这款耳机最多可与八个设备配对。 要进行此操作:

1. 将滑动开关推至蓝牙指示灯位置并维持直至蓝牙 LED 指示灯快速闪烁再松开,表示耳机处于

可被搜索状态。

2. 按照上一页的说明完成配对。

3. 在刚完成配对的设备上按下播放键。

当您已成功配对设备时,蓝牙 LED 指示灯将变为稳定的蓝灯。

如果配对超时(LED 指示灯将缓慢闪烁),将滑动开关移动到蓝牙指示灯位置,按住开关直至 LED 指

示灯再次开始快速闪烁。

包装

内容:

UE 9000 无线耳机

旅行收纳盒

带有内置麦克风和线控功能的音频连接线

USB 充电连接线

交流电源适配器

¼ 英寸(6.35 毫米)适配器

超细纤维擦拭布

了解您的 UE 9000 无

线耳机。

开启/关闭/蓝牙连接滑动开关

蓝牙 LED 指示灯

电池电量 LED 指示灯

音乐/通话

一体式控制

调高音量

播放/暂停

接听电话/挂断电话

下一曲目

上一曲目

调低音量

线控装置

Listen Through (静音) 按钮

微型 USB 充电端口

3.5 毫米输入插孔(连通时将中断蓝牙连接)

功能:

LED 指示灯状态。

蓝牙 LED 指示灯

关闭

耳机关闭或通过 3.5 毫米插孔连接到音源

蓝灯(快速闪烁):

可被搜索/配对模式

蓝灯(缓慢闪烁): 正在连接

蓝灯(稳定): 已连接

电池电量 LED 指示灯

关闭

耳机关闭

绿灯(缓慢闪烁): 正在充电

绿灯(稳定): 开启;充电完成

红灯: 电池电量不足

功能:

充电

微型 USB 充电端口 USB 充电连接线

电脑 USB 端口

交流电源适配器

在处于无线模式时,所有 LED 指示灯将自动关闭。 但是,当配对发生变化或控制按键被激活时,将会亮

起 LED 指示灯。

若要使用“静音”功能,请按一次 Listen Through 按钮。 音乐将变为静音,而环境声音将在耳机中放

大。 若要继续聆听音乐,只需再次按下 Listen Through 按钮即可。

“静音”功能仅在无线模式下聆听音乐时可用。 在有线模式下或手机通话期间不可用。

通常,通过交流电源插座充电三个小时可提供最长达 10 个小时的电量,而且充电时可以使用您的耳机。

当电池电量 LED 指示灯变为红色时,表示您应为耳机充电。 要进行此操作:

1. 通过随附的交流电源适配器或 USB 充电连接线为耳机充电。 电池电量 LED 指示灯将闪烁绿

灯。

2. 当耳机充满电时,电池电量 LED 指示灯将变为稳定的绿灯。

简体中文 - 21

功能:

收纳存放。

外出时若要安全存放您的耳机,请按以下说明进行操作:

1. 旋转耳套直至听到“卡嗒声”。

2. 将耳机平放在收纳盒里。

3. 将交流电源适配器放入顶部口袋。

4. 将所有连接线和配件放入底部口袋。

产品中心。

我们的网站提供有关于本产品的详细信息和支持服务。

请访问“产品中心”,在此您可以:

• 浏览在线文章和教程。

• 查看使用技巧和关于更多功能的信息。

• 获取疑难解答的帮助。

• 下载最新的产品软件。

• 查看在线文档和保修信息。

• 通过“社区论坛”与其他用户交流,获得建议,提出问题,分享解决办法。

• 订购备用部件(若有供应)。

访问 www.logitech.com/support/ue9000

简体中文 - 23

疑难解答。

您对本产品有何感想?

欢迎拨冗告知我们。 www.logitech.com/ithink

如果您的耳机无法正常工作或无法进行正常配对/连接,请尝试下列操作:

• 移近一点。 蓝牙无线连接的范围最长为 10 米或 30 英尺。

• 为其充电,尤其是电池电量 LED 指示灯变为红色时。 请参阅“充电”。

• 尝试调高耳机、设备或媒体应用程序的音量。 如果已连接到电脑,请检查操作系统的音量设置。

• 在设备上启用蓝牙,然后从蓝牙设备列表中选择“UE 9000”。

• 要通过重新配对修复蓝牙连接问题:

1. 在您的设备上: 从蓝牙设备列表中删除“UE 9000”

2. 在耳机上: 将滑动开关推动到蓝牙指示灯位置并维持直至蓝牙 LED 指示灯闪烁蓝灯

3. 在您的设备上: 从蓝牙设备列表中选择“UE 9000”

4. 从蓝牙设备上的媒体播放器中: 选择“UE 9000”

• 如果连接的是电脑,可能需要将耳机指定为操作系统的输入/输出设备。

请访问 www.logitech.com/support/ue9000 获取帮助

产品支持。

www.logitech.com/support/ue9000

简体中文 - 25

电池移除

和回收利用

1. 拆开并移除左侧耳罩上的耳垫。

2. 卸下螺丝,拆卸扬声器。

3. 取出旧电池。

4. 通过经授权的

电池回收中心对旧电池进行弃置。

耳机

拆卸

卸下螺丝

取出电池

拆开并移除耳垫

左侧耳罩

简体中文 - 27

© 2012 Logitech Logitech, the Logitech logo, the Logitech 罗技 UE logo, and other Logitech marks are owned by Logitech and may be registered All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

版权所有 ©2012 年罗技。罗技、罗技标志、罗技 UE 标志和其他罗技商标均归罗技所有,并或已注册。

所有其它商标均是其各自所有者的财产。罗技对于本手册中可能出现的任何错误不承担任何责任。本手册

中包含的信息如有更改,恕不事先通知。

620-004372 004

www.logitechUE.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Languages