Metz MF 72TK80, MF 72TK81, MF 72TK86, MF 82TK96, MF 82TK97, MF 84TK89 CRT Television Operating instructions

04/13/22
Operating instruction
Spectral-72
MF
72TK80
Astral-72
MF
72TK81
Corum-72
MF
72TK86
Spectral-82
MF
82TK96
Astral-82
MF
82TK97
Spectral-84
MF
84TK89
603 47 2021.A2
Foreword
Dear customer,
Contents
1. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Remote Control Unit . . . . . . . . . . . . . . . . . . . . 6
thank you for purchasing this
4. General Operating Notes . . . . . . . . . . . . . . . 12
Metz product.
5. Daily Operation . . . . . . . . . . . . . . . . . . . . . . 14
5.1 Setting the operating mode . . . . . . . . . . . . . 15
We have equipped this TV set
5.2 Operating scope . . . . . . . . . . . . . . . . . . . . . 15
with a menu system which uses 6. Setting language and country . . . . . . . . . . . . 17
"file cards" and believe that this 7. Programming Stations . . . . . . . . . . . . . . . . . . 18
will provide you with a user
8. Station logo . . . . . . . . . . . . . . . . . . . . . . . . . 21
9. Sorting Stations. . . . . . . . . . . . . . . . . . . . . . . 22
interface that is easy to under10. Selecting stations. . . . . . . . . . . . . . . . . . . . . 23
stand.
11. Picture settings, general . . . . . . . . . . . . . . . . 24
11.1 Picture settings for a specific prog. position . . . . 26
If you have any problems, you
12. Sound settings, general . . . . . . . . . . . . . . . . 27
can press the "INFO" key to
12.1 Sound settings for a specific prog.e position . . . 29
display a help function that will 12.2 HiFi output . . . . . . . . . . . . . . . . . . . . . . . . 30
assist you in setting up your TV 12.3 Two-stage muting . . . . . . . . . . . . . . . . . . . 31
12.4 Centre loudspeaker . . . . . . . . . . . . . . . . . . 32
set.
13. Colour standard . . . . . . . . . . . . . . . . . . . . . 33
14. Display configuration . . . . . . . . . . . . . . . . . 34
However, you should read at
least sections 1 to 7 of the Ope- 15. Chlidlock . . . . . . . . . . . . . . . . . . . . . . . . . . 35
16. Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . 37
rating Instructions before putting 17. Timer control. . . . . . . . . . . . . . . . . . . . . . . . 38
your new TV set into service.
18. Setting the time . . . . . . . . . . . . . . . . . . . . . . 39
19. Function keys . . . . . . . . . . . . . . . . . . . . . . . 40
20. Special functions . . . . . . . . . . . . . . . . . . . . . 41
21. Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Your METZ-WERKE
22. AV devices . . . . . . . . . . . . . . . . . . . . . . . . . 47
22.1 AV playback . . . . . . . . . . . . . . . . . . . . . . . 49
22.2 Copying recordings between AV devices . . . 51
23. EPG - NexTView . . . . . . . . . . . . . . . . . . . . . 52
23.1 EPG - Activating NexTView . . . . . . . . . . . . 53
23.2 Collecting NexTView Data . . . . . . . . . . . . . 54
23.3 Using NexTView.. . . . . . . . . . . . . . . . . . . . 55
24. Satellite system (only if fitted) . . . . . . . . . . . . 58
25. Automatic SAT station search . . . . . . . . . . . . 62
26. Specific SAT station search. . . . . . . . . . . . . . 63
27. One-touch SAT recording. . . . . . . . . . . . . . . 64
28. SAT timer recording . . . . . . . . . . . . . . . . . . 65
29. Initial programme position . . . . . . . . . . . . . . 66
30. Operation without the remote control unit . . . 67
31. Technical Data . . . . . . . . . . . . . . . . . . . . . . 68
32. Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
33. Connecting headphones . . . . . . . . . . . . . . . 70
34. Cleaning the TV set . . . . . . . . . . . . . . . . . . . 70
35. Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 74
Connecting facilities at back-panal of TV-sets . . . 76
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Codetabel . . . . . . . . . . . . . . . . . . . . . . . . . 80
2
1. Installation
• Take care that no bright artificial light or sunshine falls directly on the screen. This could cause
reflections which have a negative effect on the
brilliance of the picture.
• The optimum viewing distance is about
five times the screen diagonal dimension. For TV sets with a 70 cm screen, it
is thus about 3.5 metres.
5x cm
cm
y
• The antenna cable and any other components
(such as a video recorder) connected between
the antenna socket in the wall and the TV set
must comply with the European standard EN
60966-2-4.
• There may be no magnetic fields in the immediate vicinity of the TV set. Keep loudspeaker
boxes well away from the set.
• The antenna cable used for connecting the TV
set must have a screening attenuation of at least
75 dB.
• The use of non-approved cables will invalidate
the operating permission for the TV set.
• For details of how to connect peripheral devices
such as video recorders, DVD players, etc. press
the „INFO“ key to call the help function, select
„Connecting AV devices“ with the cursor and
press „OK“ to display the information.
3
2. Safety notes
• Always place the monitor on a solid, stable surface.
• If a cold TV set is moved to a warm room,
always allow any condensation on the screen to
evaporate before switching it on.
• The TV set is intended for use in a dry room. If,
in exceptional circumstances, you use it outdoors, take care that is protected against moisture (rain, splashed water, dew).
• TV sets need adequate ventilation. Never cover
the openings on the rear of the set with curtains,
doilies, newspapers, etc. Also take care that the
slits in the bottom of the case are freely accessible so that the intake of the cooling air is not
hindered.
• If you place the TV set in a wall unit,
leave sufficient space on all sides for the
circulation of cooling air.
y
• Do not place the TV set close to a radiator, since this would effect adequate
cooling.
• Do not place
burning candles or
vessels containing liquids (vases, etc.)
on top of the TV set, since any hot wax or water
dripping into the set could cause serious damage
to the electronic components and could also jeopardize the electrical safety of the set.
• Lightning can damage electrical equipment. A
lightning flash entering the power cable or the
aerial cable can damage the TV set even if it is
4
2. Safety notes
switched off. You should therefore disconnect
the power cable and aerial cable from their outlets or from the TV set in the case of a thunderstorm.
• The monitor may be opened and repaired only
by a qualified person.
CAUTION! HIGH VOLTAGES CAN KILL!
If repairs should be necessary, consult your
local dealer.
• Always switch off the TV set before cleaning it.
• Do not hold the remote control directly in front
of your eyes and press a button. The remote
control emits infrared radiation!
• Do not place rechargeable batteries in the battery compartment of the remote control.
Use only two 1.5 V dry batteries of the type
LR03/AM4/AAA (Micro).
• The TV set is intended only for the reception and
reproduction of picture and sound signals.
• The TV set may be operated only
from a mains voltage of 230 VAC,
50/60 Hz.
240 VAC in Australia only
• Lay the power cable so that nothing
stands on it and no-one can trip
over it.
5
3. Remote control unit
21
22
The Metz remote control unit RG 12 can
be used to remotely control all Metz TV
sets with the type designation "TH" (see
the Operating Instructions of the TV set
or look at the label on the back of the
set) or later models (such as TK, TL, ...)
as well as video recorders VCR1 and
VCR 2, DVD players and HiFi equipment (such as radios, cassette players,
CD players, amplifiers, etc.) made by
Metz or various other manufacturers.
The remote control unit transmits commands to the TV set with the aid of infrared light. You should always point the
remote control unit directly at the TV set.
The remote control unit may possibly interfere with other infrared devices (such as
infrared headphones) within its range.
☞ Sunlight falling directly on the TV
set may interfere with the operation
of the remote control unit, because
the TV set cannot detect the infrared signals from it. The TV set must
first be switched on with the main
switch before the remote control
unit can be used.
The remote control unit is programmed
as follows before it leaves the factory:
• TV
Metz TV sets with the type designation "TH"
• VCR1 Metz video recorders with remote
control unit RH51
• VCR2 Metz video recorders with remote
control unit RF52
• DVD Metz DVD players with remote
control unit RG/RH374
• HiFi Metz HiFi CD receiver HE 11 with remote
control unit F11
Never load rechargeable batteries
into the battery compartment of the
remote control unit!
6
Only use two 1.5V LR03/AM4 batteries, size AAA.
3. Remote control unit
The most important keys in
normal use
ON:
the last station watched before the set
was switched off is selected.
OFF (standby)
In the „Information“: return to the contents
Frame freeze
Delete key in the menus
Numeric keys (direct station selection)
Return to previously selected programme position
In the TV menu: call „Configuration“
P+ / P-: next/previous programme
position
Display date and time
In the TV menu: call „Timer“
Volume control
Also used to change settings in the
menu
In the TV menu: call the „Station
table“ or display station attributes
Return to previously selected programme position
Display the station table
Overview of key functions
Switch to satellite radio mode
Switch on from standby mode to
satellite radio mode 1)
(1) only if a SAT upgrade module is
fitted)
Function keys F1 ... F3
Cursor control key in the "Information" and in the menus
OK - confirmation key
Change settings in the TV menu
Call the sound settings
In the TV menu: call „AV devices“
Call the picture settings
In the TV menu: call „Picture and
sound“
Return to the TV picture
Switch from satellite radio mode1) to
TV mode Switch on from
standby mode to TV mode (1) only if a
SAT upgrade module is fitted)
Call the AV menu for playback and
recording
Switch on from standby mode to AV
mode
21
Select key - used for switching the
operating level to AV devices
22
EPG (Electronic Program Guide)
= open NexTView
Sound mute
Call the TV menu
In the menu: return to the previous
main menu item
Call Teletext
Call the „Information“
7
3. Remote control unit
1. Programming the remote control unit for control of your
equipment
ce. If the code does not exist in the
table, the LED lights for about two
seconds.
In order to remotely control your consumer
electronics equipment, you must programme each of the various levels of the remote
control unit with a 3-digit code.
• TV (TV-Gerät)
The TV level is already programmed
for Metz TV sets with the type designation "TH". This programming cannot
be changed.
• VCR 1 (Video recorder 1)
VCR 2 (Video recorder 2)
DVD-Player
HiFi (e.g. amplifier, tuner, tape, etc.)
The remote control unit must be programmed with a code from the code
list for each level you want to use.
1.2 Programming the codes for
CD Player, Tuner and Tape
☞ Note the factory settings (Page 6)
and the list of available codes at the
end of these Operating Instructions.
1.1 Programming the codes for
VCR and DVD
☞
When you select the steps a)...c) ,you
have about 15 seconds to continue
with the next step. If you do not do so
within this time, the unit automatically
returns to the TV level
a) Use the Select key to select the desired
level. The coloured LED for the currently selected level lights.
and F1 together and
b) Press the keys
hold them until the LED blinks twice.
c) Enter the desired code (see the code
list) with the numeric keys. If this code
is accepted, the LED again blinks twi8
☞
When you select the steps a)...c) ,you
have about 15 seconds to continue
with the next step. If you do not do so
within this time, the unit automatically
returns to the TV level.
a) Use the Select key to select the HiFi
level. The coloured LED HiFi lights.
b) Press the key
, release it and then
press the key: ...
...F1 for CD player
...F2 for Tuner (radio)
...F3 for Tape (cassette recorders)
der Fernbedienung drücken, bis die
until the LED blinks once.
c) Enter the desired code (see the code
list) with the numeric keys. If this code
is accepted, the LED again blinks twice. If the code does not exist in the
table, the LED lights for about two
seconds.
1.3 Programming the code for
HiFi amplifier
☞ When you select the steps a)...d) ,you
have about 15 seconds to continue
with the next step. If you do not do so
within this time, the unit automatically
returns to the TV level.
a) Use the Select key to select the HiFi
level. The coloured LED HiFi lights.
b) Press the key
, release it and then
press and hold the F3 key until the
LED blinks twice.
3. Remote control unit
c) Press the F1 key: the LED blinks once.
d) Enter the desired code (see the code
list) with the numeric keys. If this code
is accepted, the LED again blinks twice. If the code does not exist in the
table, the LED lights for about two
seconds.
1.4 Station search
Follow the instructions for programming
the code for VCR, DVD, CD, tuner, tape
as far as the step where the code number is entered. Then enter the three-digit
code number "001" for the station
search. The LED blinks twice to acknowledge the input. Then press and hold the
"Station-search" key (which depends on
the operating level; see the table on
pages 10 and 11) until the device stops
or is switched off (a STOP or OFF command is issued automatically every 1.5
seconds).
Release the "Station search" key and
press the "Select" key to confirm that you
want to execute a station search (the
code which was found is saved).
After completion of the station search, or
when all code numbers have been interrogated, the corresponding LED blinks
five times.
programmed for a level, first select the
level as described in section 1.1, steps
a) and b).
b) Enter on the numeric keys. The
LED blinks twice to acknowledge your
input.
c) Press numeric key (for the first digit
of the code). The LED now blinks the
number of times corresponding to the
programmed digit (if, for example, the
LED blinks three times, the digit 3 is
programmed).
d) Press numeric key (for the second
digit of the code). The LED now blinks
the number of times corresponding to
the programmed digit (if, for example, the LED does not blink, the digit 0
is programmed).
e) Press numeric key (for the third
digit of the code). The LED now blinks
the number of times corresponding to
the programmed digit (if, for example,
the LED blinks seven times, the digit 7
is programmed).
In this example, the currently programmed code is thus If you lose count while reading out the
code, simply start again at step 2c).
2. Determining which code is
already programmed (readout mode)
☞
When you select the steps a)...e) ,you
have about 15 seconds to continue
with the next step. If you do not do so
within this time, the unit automatically
returns to the TV level.
a) In order to determine which code is
9
3. Remote control unit
Key
21
22
a
b
c
21
22
VCR 1/ 2
On
On / Standby
R
Record
F1
Time in display
F2
F3
0...9 Numeric keys:programme selection
P +/–
Programme +/–
<>
Fast forward/Rewind
OK
OK
Vol.+/–
TV volume +/–
Mute
Mute TV
Menu
MENU
Text
Info
TV-set INFO*
II
Pause
red
STOP / Statiom search
green
PLAY
white
Slow-motion
yellow
blue
TV
AV
AV input
Select
Select operating
EPG
Switching voltage on/off**
* In preparation: If the TV set is switched on,
the current operating level is indicated.
** AV-Link with Panasonic VCR
Note:
The assignments of the operating levels to the
device functions apply only for the AV devices
preset in the factory. If other AV devices in accordance with the code table are used, some of
these assignments may differ or be restricted.
Station search:
Programme the code for VCR, DVD, CD, tuner or
tape and execute the steps up to the input of the
code number. Then enter "001" as the 3-digit
code for station search. The LED blinks twice to
acknowledge this input. Then press and hold the
10
3. Remote control unit
Key
a
b
c
21
22
DVD
On
On / Standby
R
Return
HiFi
C D ( F 1)
Angle
F2
Audio
F2 & ON: tuner
Subtitle
F3 & ON: tape-input
F3
TAPE (F3)
ON: display time/track
ON: radiotext on/off
ON + AV, ON: on/standby ON + AV, ON: on/standby
F1
0...9
TUNER (F2)
F1 & ON: CD
F1 & ON: CD
F2 & ON: Tuner
F3 & ON: tape input
Numeric keys: title selection Num.Keys: title selection N.Keys: programme selection
P +/–
Cursor up / down
<>
Cursor left/right
OK
OK / Enter
Vol.+/–
TV volume +/–
Mute
Mute TV
Titel +/–
Frequency +/–
AMP volume +/–
AMP volume +/–
AMP volume +/–
TV set INFO*
TV set INFO*
Menu
MENU
Text
Display
Info
TV set INFO*
TV set INFO*
II
Pause
PAUSE
red
STOP / Station search
green
PLAY
white
EJECT
yellow
Skip +
blue
Skip –
Programme +/–
STOP / OPEN-CLOSE / Station search num. key =Station search
Station search
PLAY
TV
AV
Repeat
AUX Input
AUX input
AUX input
Select
Select operating level
Select operating level
Select operating level
Select operating level
EPG
Title
"Station search" key (depending on the operating level: see the
table) until the device stops running or switches off (an OFF or
STOP command is automatically transmitted every 1.5
seconds). Release the "Station search" key and start the search
with the "Select" key (the code you entered is saved). When the
station search has been completed or all code numbers have
been interrogated, the corresponding LED blinks five times.
Reset:
Programme the code for VCR, DVD, CD, tuner or tape and
execute the steps up to the input of the code number. Then enter
"000" as the 3-digit code for "Reset". The LED blinks twice to
acknowledge this input. This resets all codes to the factory settings.
The reset is executed for all operating levels, regardless of the
operating level from which it is executed.
11
Call the menu
INFO
4. General operating notes
When designing this TV set, we have tried to
make its operation as easy as possible so that
you will enjoy learning how to use it.
The TV set itself can provide the answers, with the
menu „Information“, to any questions you may
have during installation and switching on.
To use this function, simply press the „INFO“ key
to display the table of contents of the
„Information“ on the screen.
The menu „Information“ (help function)
In the table of contents, or in the index, you
Information
can then select the information you need
Contents (1/2)
with the cursor control key.
Index
„Cursor right“ : move to next page of the
index.
Programme selection
Picture settings
„Cursor left“ : scroll backwards through
Sound settings
AV playback / recording / satellite recording
the index.
Teletext
„Cursor up“ : select the previous underliFunction key
Satellite radio mode
-->
ned text or the arrow -->.
Use the cursor to select an underlined text.
„Cursor down“ : select a line in the list.
OK: further information
INFO: help index
Then press the „OK“ key to display this
Previously visited pages: backwards forwards
information.
OK
You can select any underlined words in the table
of contents, the index or the explanatory text with
the cursor and press „OK“ in order to display
further information about them.
You can scroll back and forth through previously
selected help pages with the aid of the red and
green keys.
12
4. General operating notes
Call the menu
MENU
Main menu items
TV-Menü
TV-Menü
Using the menus
With the „TV menu“, we help you to find your
way through the many operating functions of
your TV set.
Do not hesitate to try out the options in the
various menus. Any changes you make become
permanently effective only if you save them by
pressing the „OK“ key. If you are not sure that
you want to retain a new setting, you
can simply exit from the menu by pres sing the „TV“ key. The new setting is
Picture-Volume
then discarded.
AV devices
While you are in the TV menu, you can
Station table
return to the main menu item at any time
Timer
by pressing the „MENU“ key. If you do
Configuration
not understand a menu item, press the
Coloured keys:
„INFO“ key for more information.
call menü
TV: return to TV
To return to the menu, press the „INFO“
picture
key twice.
The five main sections of the menu can be opened
with the coloured keys. The help information is
shown in the form of two card files containing the
subjects (blue) and the sections of the selected
subject (yellow). You can select the subjects and
sections with the aid of the red triangular cursor,
which is moved with the oval key.
Pressing the „OK“ key then moves you to
the setting window below the file boxes.
The current setting is displayed here and
Picture-Volume
you can change it with the - + key.
AV devices
To save the new setting, press the „OK“
Station table
key. This also returns you to the file of
Timer
yellow section cards. If you do not want
to save the new setting, press the
Configuration
„MENU“ key to return to the related
: select,
OK: go to
main menu item or press the „TV“ key to
settings.
exit from the menu.
You can delete your input by pressing the ll key.
OK
Subjects*
Sections*
Factory settings
Rotation*
Panorama*
CTI
Noise reduction
Sound set.prog.po Picture sharpness
Sound settings, gen. Colour intensity
Pict. set.,prog. posn. Contrast
Pict. settings, gen. Luminance
These settings apply to all programme position
Cursor
Setting window
13
5. Daily operation
Switching on
Switch on the TV set with the main switch. The red
standby indicator lights.
Then enter the desired programme position on the
numeric keys of the remote control unit.
Alternatively, simply press the
key with the TV
set in standby mode to select the programme
position you were watching before the set was
switched off.
If you have defined an initial programme position
(see page 66), pressing the
key with the TV
set in standby mode will select this programme
position.
Ǽ
Switching off
Press the
key to switch the TV set to standby
mode or press the main switch on the TV set to
switch it off completely.
OK
Station selection
OK
You can select a station (programme position) with
the numeric keys, with the rocker key „P+/P-“ or from
the station table.
To call the station table, press the white key . Use
the cursor control key to select the desired station and
then press the „OK“ key to confirm your selection.
Adjusting the volume
You can adjust the volume with the - + key.
Adjusting picture and sound settings
Call the picture settings with the blue key
or
the sound settings with the yellow key
.
At the bottom left of the screen, you will then see
the setting box with the various functions. Select
the desired function with the rocker key „P+/P-“
and adjust the setting with the - + key.
14
5.1 Setting the operating mode
The TV set can be switched on at the desired operating level with the keys "TV", "AV" and "R".
These keys can also be used to switch between the
operating levels.
When the TV set is switched on with one of these
keys, the station which was last selected at this
operating level is again set.
TV = television mode
AV = audio-visual mode for use with AV devices
R = radio mode 1)
(1) available only if a SAT receiver is installed)
Call the menu
TV
AV
R
5.2 Operating scope
Call the menu
Until we introduce Version 2.1 of the software, this
menu item is available only in the service menu. If
you wish to reduce the operating scope of your TV
set, please consult your local Metz dealer.
The operating scope of the TV set is indicated by
asterisks in the menus and can be reduced in two
stages in order to prevent inadvertent changing of
certain settings.
MENU
OK
Programming the operating scope
(Software version V2.1 or higher)
Operation
Picture-Volume Function for AV*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
TV-Menü
• Press the "MENU" key to open the TV
menu.
• Press the red key
to open the menu
"Configuration".
• Use the cursor control key to select
"Operation".
• Press the "OK" key and then use the
cursor control key to select "Operating".
• Press the "OK" key and then, in the setting
window, select the desired operating scope
with the - + key.
: select,
OK: go to
settings.
Scope of operation
Scope of operation
EPG settings
Automatic zoom
Sound settings
HiFi output
Init. prog. position
Display configuration
full 15
5.2 Operating scope
The full TV menu is displayed
A reduced TV menu is displayed. The following functions are no longer available:
- Special picture settings such as panorama, CTI,
noise reduction, picture sharpness, etc.
- Special sound settings such as stereo wide, spatial sound, balance, tone settings, etc.
- Picture and sound settings for individual programme positions.
- Programming of the function keys.
- Settings for the EURO sockets.
- Special functions in the menu "Operation".
The TV menu cannot be opened, Only the standard functions of the remote control are available.
• Save the changed setting by pressing the "OK"
key.
If you want to open a menu although only the operating scope with one asterisk is active, then:
• Press and hold the "MENU" key for at least five
seconds to open the TV menu.
• The menu item "Operation" is automatically
selected.
• Use the - + key to select the desired operating
scope and press the "OK" key to save the changed setting.
16
6. Setting the language and country
☞ In a menu with two asterisks (**), the set-
Call the menu
tings for the menu items "Language" and
"Country" cannot be changed.
MENU
Setting the language for the TV menu
You can select one of the available languages for
the display of the TV menu. The text in the menu
and in the help function (Information) is then
displayed in the selected language.
OK
Setting the country
After installing the TV set, you must select the
country where it is installed. This information is used by the TV set to make
certain basic settings (such as the channel spacing, the sorting sequence for the
stations, etc.).
• Press the red key
to open the menu
„Configuration“.
• Press the „OK“ key and use the cursor
control key to set the desired language
or country.
• Press the „OK“ key to save the settings.
• Press the „TV“ key to close the menu.
☞
The menu language can also be set
in the help function (Information)
by selecting the appropriate national flag.
: select,
OK: go to
settings.
Operation
Picture-Volume Function for AV*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
: select,
OK: go to
settings.
Nederlands
Français
Español
Italiano
English
Deutsch
Selected language English
TV-Menü
• Press the „MENU“ key to open the TV
menu.
TV-Menü
Setting the language and country:
Operation
Picture-Volume Function for AV*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
Italien
Großbritanien
Frankreich
Finnland
Deutschland
Dänemark
Belgien
Baltikum
Australien
Selected country Australia
* The number of subjects and sections
displayed here depends on the operating scope setting.
17
Call the menu
MENU
OK
Picture-Volume
AV devices
Station table
TV-Menü
Timer
Configuration
: select,
OK: go to
settings.
You can programme the TV stations in three different ways.
a) Automatic station search
The automatic station search function searches the
entire range of reception frequencies for TV stations.
All stations which are found are placed in the
station table, which is displayed at the end of the
search operation. If you are not satisfied with the
order in which the stations are stored, you can shift
or delete stations as described in the next section.
Executing an automatic station search
• Press the „MENU“ key to call the TV
menu
• Press the red key
to open the
„Configuration“
menu.
Operation
Function for AV*
• Move the cursor to „Automatic station
Function for F3*
search“.
Function for F1*
•
Press the „OK“ key several times until
EURO sockets*
the
message „Searching for stations“
Station search
Country*
DataLogic
is displayed.
Language*
Terr. station search
• A station table containing all stations
which are found is displayed on the
Station search (START)
left side of the screen.
• At the end of the search, all stations
which were found are sorted and
displayed.
• To delete any unwanted stations, select them
with the cursor and press the „II“ key.
• To save the stations, press the „OK“ key and
enter, with the numeric keys, the number of the
programme position where the first station is to
be saved. The remaining stations are saved in
the following programme positions.
* The number of subjects and sections
displayed here depends on the operating scope setting.
18
7. Programming stations
b) Station search
The station search function permits you to search
for specific stations if you do not know their channel number or frequency.
7. Programming stations
Call the menu
TV-Menü
Executing a station search
• Press the „MENU“ key to display the TV menu.
• Press the white key
to display the station
table.
• Move the cursor to en empty programme position (or to a position containing a station you
wish to replace with the new station).
• Move the cursor to „Frequency/Channel“.
• Press the „OK“ key.
• In the setting window which is then displayed,
move the cursor to „Search“.
• Press the - + key to start the search.
• The search stops when the first station
is found.
• If you want to save this station, press
Picture-Volume
the „OK“ key.
AV devices
• If you do not want to save this station,
Station table
press the - + key again to continue the
search.
Timer
MENU
OK
009 MDR
008 SW 3
007 N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
Configuration 001 ARD
c) Direct channel input
: select,
go to
You can programme a station directly by OK:
settings.
entering its channel number with the
numeric keys (you must, of course, know the
channel number of the desired station).
Channel
6
Frequency 182.31 MHz
Scan operation
Decoder
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Frequency/channel
TV-standard 2)
Cable channel
-ARD
Executing direct channel input
• Press the „MENU“ key to display the TV menu.
• Press the white key
to display the station
OK
table.
• Move the cursor to en empty programme position (or to a position containing a station you
2) Available only on TV sets
wish to replace with the new station).
which are equipped with this
• Move the cursor to „Frequency/Channel“.
option.
• Press the „OK“ key.
* The number of subjects and sections
displayed here depends on the operating scope setting.
19
Call the menu
MENU
7. Programming stations
• In the setting window which is then displayed,
move the cursor to „Channel“ or „Special channel“.
• Enter the number of the channel or special
channel with the numeric keys.
• Press the „OK“ key to save the station.
• Press the „TV“ key to close the menu.
Fine tuning
OK
When you programme stations, each channel is
automatically tuned to the centre frequency. This
is normally sufficient. If this automatic function
does not produce satisfactory results, you can
carry out fine tuning.
Executing fine tuning
Picture-Volume
AV devices
Station table
TV-Menü
Timer
Configuration
Change value with
+ and Confirm with OK
Channel
6
Frequency 182.31 MHz
Scan operation
OK
20
• Select the desired programme position.
• Press the „MENU“ key.
• Press the white key
to open the station table.
• Move the cursor to the subject card
„Frequency/Channel“.
• Press the „OK“ key to confirm your
Cable channel
-selection.
•
In the setting window, select „FrequenARD
cy“ and use the - + key to change the
frequency value until the picture is as
clear as possible.
• Save the new setting by pressing the „OK“ key.
• Press the „TV“ key to close the menu.
8. Station logo
Call the menu
Each station which transmits VPS signals also
sends a station logo with up to eight characters,
which is automatically assigned to this station in
the station list. If this automatic function does not
work correctly, or if you want a different station
logo, you can overwrite the logo manually.
MENU
Setting the station logo
TV-Menü
• Select the desired programme position.
• Press the „MENU“ key.
OK
• Press the white key
to open the station table.
• Move the cursor to the subject card „Logo“.
• Press the „OK“ key to confirm your selection. In
the setting window, you can now enter
009 MDR
the desired logo with the aid of the
008 SW 3
numeric keys.
Decoder
Picture-Volume 007 N24
As long as the red cursor is selected,
Sound correction
006 PRO 7
AV devices
you can enter the desired letters and
Colour standard*
005 RTL
digits by pressing the numeric keys
Picture corrections*
Station table 004 SAT 1
Picture quality*
003 Bayern 3
(e.g. key : J-K-L-5). If you make a
Timer
Enter Logo
002 ZDF
mistake, you can delete the characters
Configuration 001 ARD
Frequency/channel
before the red cursor, one at a time,
: select,
. , ABC DEF
with the red key. To delete the entire
OK: go to
GHI JKL
MNO
ARD
settings.
logo, press the ll key.
! PQRS TUV " WXYZ
• When you are finished, press the
„OK“ key to save the new logo.
• Press the „TV“ key to close the menu.
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
21
Call the menu
9. Sorting stations
In the station table, you can shift or copy one or
more stations to other programme positions. You
can also delete any unwanted stations.
MENU
F1
OK
009 MDR
008 SW 3
Picture-Volume 007* N24
006 PRO 7
AV devices
005 RTL
Station table 004 SAT 1
003 Bayern 3
Timer
002 ZDF
Configuration 001 ARD
TV-Menü
F1: End
White: Clear all
marks
Copying, shifting and deleting stations
• Press the „MENU“ key to call the TV menu.
• Press the white key
to call the station table.
• Press the „F1“ key to enable editing of the station table.
• Use the cursor control key to select the programme position you want to copy, shift or
delete.
• Press the „OK“ key to mark this programme position: the text colour changes to orange and an asterisk is
Decoder
displayed after the last digit of the
Sound correction
Colour standard*
programme position number (in the
Picture corrections*
example on the left: position 007).
Picture quality*
Enter Logo
• To shift or copy this station, move the
Frequency/channel
F1
* The number of subjects and sections
displayed here depends on the operating scope setting.
22
cursor to the programme position
before or after which the selected station(s) is/are to be inserted. If these
stations originally had a lower position number than this position, it/they
will be inserted before this programme
position. Stations which originally had
a higher number will be inserted after
this programme position.
• Press the - + key to copy (+) or shift (-) the
selected station(s).
• To delete a station, press the ll key.
• Press the „F1“ key to save the new settings
Move, copy, delete: Select one or more stationswith OK.
Move cursor to new position
+ = copy, - = move, II = delete
10. Selecting stations
Call the menu
Station selection and programme position management
Your TV set can manage up to 999 programme
positions in the station table. You can select these
programme positions with the numeric keys, with
the oval „P+/P-“ rocker key or via the station
table.
When you enter a position number on the numeric keys, the first digit you enter is the „hundreds“
digit. If there are less than 100 programme positions defined, this digit automatically moves to the
„tens“ position. If less than 10 programme positions exist, it automatically moves to the
„ones“ position.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
After pressing any numeric key, you
have three seconds to enter further
digits.
Selecting programmes from the
station table
In normal TV mode, you can open the
station table with the white key
. In
the table which is then displayed, you
can select a station with the oval „P+/P-“ rocker
key. Then press the „OK“ key to switch to this station.
If more than 20 stations are stored in the station
table, you can display the next 10 stations by
pressing the oval cursor control key.
MDR
Nord 3
RTL
SAT 1
Nord 3
SuperRTL
Kabel 1
PRO 7
West 3
Hessen 3
SW-BW
Bayern 3
ZDF
ARD
OK
Return to previous station
With the red key
, you can switch back and
forth between the last two stations you selected.
23
Call the menu
MENU
11. Picture settings, general
☞ In a menu with two asterisks (**), the settings for certain menu items cannot be
changed.
You can adjust the picture settings (brightness,
contrast, chrominance, etc.) for all programme
positions and save these settings as the standard
values. These standard values can be recalled at
any time by pressing the „OK“ key.
OK
Picture-Volume
AV devices
Station table
TV-Menü
Timer
Configuration
: select,
OK: go to
settings.
Defining the picture settings:
• Press the „MENU“ key to open the TV menu.
• Press the „OK“ key to open the menu „Picture
and sound“.
Picture pos.,vertic*
• Use the cursor control key to select the
Film mode*
CTI*
individual picture settings.
Comb filter
• Press the „OK“ key and then use the
Noise reduction
- + key to change the setting in the setSound set.prog.po Picture sharpness
ting window.
Sound settings, gen. Colour intensity
Pict. set.,prog. posn.* Contrast
• Use the cursor control key to select the
Pict. settings, gen. Brightness
3rd line in the setting window "...
Brightness
61
accept as a standard value: OK".
Standard value
50
• Save the new setting as the standard
Accept 61 as the standard value:
value by pressing the „OK“ key.
2)
OK
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
24
• Press the „TV“ key to close the menu
If these standard settings are unsatisfactory
for some programme positions, you can
define special individual settings for these
positions as described on the next page.
2) Rotation
This function can be used to compensate for any
tilting of the picture caused by the earth’s magnetic field. The function should be executed when the
set is first installed and if the set is subsequently
moved to a different position.
3) Film mode – see glossary.
2) Available only on TV sets which are equipped
with this option.
☞
11. Picture settings, general
☞ In a menu with two asterisks (**), the set-
Call the menu
MENU
tings for certain menu items cannot be
changed.
Panorama function 2)
☞
This setting can be made only on 16:9 TV
sets.
OK
The panorama function can be used to expand
"normal" programmes in 4:3 format to the 16:9
format. This is done by increasing the width of the
picture to fill the complete width of the screen.
Setting Panorama2) mode:
Rotation2)*
Picture pos., vertica
Panorama2)*
Picture-Volume
CTI*
AV devices
Comb filter*
Station table Sound set.prog.po Noise reduction*
Sound settings, gen. Picture sharpness*
Timer
Pict. set.,prog. posn.* Colour intensity
Configuration Pict. settings, gen. Contrast
TV-Menü
• Press the "MENU" key to open the TV
menu.
• Press the "OK" key to open the menu
"Picture and sound".
• Use the cursor control key to select
"Panorama".
: select,
• Press the "OK" key and then, in the
OK: go to
settings.
setting window, use the - + key to
change the setting for "Panorama".
• Use the cursor control key to select the menu
item "Mode" and use the - + key to select either
"linear" or "non-linear".
• Press the "OK" key to save your changes.
The picture shows the factory setting.
• Press the "TV" key to close the TV menu.
☞
Panorama
On, zoom 1 Mode
Non-linear
OK
The functions "Panorama2)" and "Zoom"
can also be used together.
OK
2) Available only on TV sets which are equipped
with this option.
* The number of subjects and sections
displayed here depends on the operating scope setting.
25
Call the menu
MENU
OK
re settings for a specific programme position cannot be changed.
If the standard settings are not satisfactory for
certain programme positions, you can define different settings for these positions with the menu
item „Picture settings for Pr ...“. These settings
apply only to the selected programme position
and cannot be overwritten by the standard settings.
VCR
Colour standard
Colour offset
Picture-Volume
CTI
AV devices
Comb filter
Station table Sound set.prog.po Noice reduction
Sound settings, gen. Picture sharpness
Timer
Pict. set.,prog. posn.* Colour intensity
Configuration Pict. settings, gen. Contrast
TV-Menü
11.1 Picture settings for a specific
programme position ...
☞ In a menu with two asterisks (**), the pictu-
: select,
OK: go to
settings.
Defining different picture settings for Pr.
xy:
• Select the programme position for
which you want to define different picture settings.
• Press the „MENU“ key to open the TV
menu.
These settings apply to the currently selected programme
• Press the „OK“ key to open the menu
position.
„Picture and sound“.
• Use the cursor control key to select the
item „Picture settings for Pr. xy“.
OK
• Press the „OK“ key and then select the setting
you want to change.
• Press the „OK“ key to confirm your selection
and then, in the setting window, use the - + key
to change the setting.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
OK
26
☞
You can also define and recall the individual picture settings in the station table.
12. Sound settings, general
☞ In a menu with two asterisks (**), the set-
Call the menu
tings for certain menu items cannot be
changed.
MENU
You can adjust the sound settings (volume, treble,
bass, etc.) for all programme positions and save
these settings as the standard values. These standard values can be recalled at any time by pressing the „OK“ key.
OK
Defining the sound settings:
TV-Menü
• Press the „MENU“ key to open the TV
menu.
• Use the blue key
to select the menu
Picture-Volume
„Picture and sound“ and press the
AV devices
„OK“ key to open it.
Station table
• Use the cursor control key to select the
Timer
item „Sound settings, general“.
Configuration
• Press the „OK“ key and then select the
: select,
OK: go to
setting you want to change.
settings.
• Press the „OK“ key to confirm your
selection and then, in the setting window, use
the - + key to change the setting.
• Press the „OK“ key to save the new setting as
the standard value.
• Press the „TV“ key to close the menu.
☞
If these standard settings are unsatisfactory for some programme positions, you can
define special individual settings for these
positions as described on the next page.
Stereo wide*
Spatial sound*
Balance*
Tone settings
Volume headphones
Sound set.prog.po Bass
Sound settings, gen. Treble
Pict. set.,prog. posn.* Volume control
Pict. settings, gen. Volume
Volume
55
Satandard value
46
Accept 55 as the standard value: OK
OK
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
27
Call the menu
12. General sound settings
Automatic volume correction
Some stations transmit their commercials at a higher volume than the actual programme. In order to
avoid having to adjust the volume with the remote
control each time this happens, you can activate
the automatic volume correction function.
This function compensates, as far as possible, for
the differences in the sound volume.
The setting made here applies to all programme
positions.
MENU
OK
Activating automatic volume correction:
• Press the "MENU" key to open the TV
Stereo wide*
menu.
Spatial sound*
Balance*
Picture-Volume
Tone settings
AV devices
Volume headphones
Station table Sound set.prog.po Bass
Sound settings, gen. Treble
Timer
Pict. set.,prog. posn.* Volume control
Configuration Pict. settings, gen. Volume
TV-Menü
: select,
OK: go to
settings.
Volume control
on
• Press the "OK" key to open the menu
"Picture and sound".
• Use the cursor control key to select
"General sound settings".
• Press the "OK" key and then use the
cursor control key to select "Volume
correction".
• Press the "OK" key and then, in the setting window, use the - + key to change
the setting.
* Press the "OK" key to save your changes.
* Press the "TV" key to close the TV menu.
☞
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
28
The "Volume correction" function in the
menu "General sound settings" overrides
the "Volume correction" function in the
menu "Sound settings for Pr...".
12.1 Sound settings for a specific
programme position ..
☞ In a menu with two asterisks (**), the settings for certain menu items cannot be
changed.
If the standard settings are not satisfactory for certain programme positions, you can define different settings for these positions with the menu item
„Sound settings for Pr...“. These settings apply
only to the selected programme position and cannot be overwritten by the standard settings.
Call the menu
MENU
OK
TV-Menü
Defining different sound settings for Pr. xy:
• Select the programme position for
which you want to define different
sound settings.
Picture-Volume
• Press the „MENU“ key to open the TV
AV devices
menu.
Station table Sound set.prog.po
• Use the blue key
to select the menu
Sound settings, gen. Forced mono*
Timer
Pict. set.,prog. posn.* Tone settings*
„Picture and sound“ and press the
Configuration Pict. settings, gen. Volume correction
„OK“ key to open it.
: select,
These settings apply to the currently selected programme
• Use the cursor control key to select the
OK: go to
position.
settings.
item „Sound settings for Pr. xy“.
• Press the „OK“ key and then select the
setting you want to change.
• Press the „OK“ key to confirm your selection
OK
and then, in the setting window, use the - + key
to change the setting.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
☞
You can also define and recall the individual sound settings in the station table.
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
29
Call the menu
12.2 HiFi output
Audio sockets are provided on the back of the TV
set (see Page 76 of the Operating Instructions) and
can be used to connect the TV set to a HiFi system
If this is done, some changes must be made in the
menu "HiFi output".
If you wish to adjust the sound settings only on the
HiFi system, you must set the HiFi output to constant.
If you do this, it is no longer possible to adjust the
sound with the Metz remote control (except for the
mute function
.
MENU
OK
If you want to be able to adjust the sound with the
Metz remote control, you must set the
HiFi output to variable.
Operation
TV-Menü
Picture-Volume Function for AV*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
: select,
OK: go to
settings.
HiFi-Ausgang
Ausgangspegel
Scope of operation
EPG settings
Automatic zoom*
Sound settings*
HiFi output*
Init. prog. position*
Display configuration*
konstant
40
Setting the HiFi output
• Press the "TV" key to open the TV menu.
• Press the red key
figuration" menu.
to open the "Con-
• Use the cursor control key to select
"Operation" and then "HiFi output".
• Press the "OK" key and then, in the setting window, use the - + key to set the
desired parameter.
• Press the "OK" key to save your changes..
• Press the "TV" key to close the TV menu.
In normal TV mode, the setting "Sound via..." can
be changed with the yellow key
and the - + key.
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
30
12.3 Sound settings
Call the menu
In the menu "Sound settings" you can activate a
volume reduction (two-stage muting) function.
If this function is active, you can reduce the volume
in TV mode in two stages with the key "Mute"
.
MENU
Activating the volume reduction function
TV-Menü
• Press the "Menu" key to open the TV menu.
• Press the red key
to open the menu "Configuration".
• Use the cursor key to select "Operation" and
"Sound settings".
• Press the "OK" key and then, in the settings window, use the – + key to set "Mute (two-stage)" to
"On".
You can also select the desired sound out put with the function "Sound via", where
Picture-Volume
you can choose one of the following
AV devices
options with the – + key: loudspeakers,
Station table
HiFi or Surround.
Timer
• Press the "OK" key to save the new settings.
Configuration
• Press the "TV" key to close the TV
: select,
OK: go to
menu.
settings.
OK
Operation
Function for AV*
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Language*
Mute (two-stage) on
Scope of operation
EPG settings
Automatic zoom
Sound settings
HiFi output
Init. prog. position
Display configuration
Sound via Loudsp.
In normal TV mode,
• pressing the mute key
once reduces the volume by 12 points on the scale;
• pressing it again within the next five seconds
reduces the volume to "00".
• You can subsequently restore the volume to the
default value by pressing the mute
key
again.
OK
31
Call the menu
MENU
12.4 Centre loudspeaker
If you use a surround-sound system for playing
back the TV sound signal, the TV set acts as the
centre loudspeaker.
In normal TV mode, press the yellow key
and
use the P+/P- key to select "Sound via". Then use
the – + key to select the setting "Sound via surround".
Setting the centre loudspeaker volume
• Press the "Menu" key to open the TV menu.
• Press the "OK" key to open the menu "Picture
and sound".
• Use the cursor key to select "Sound settings,
general" and then "Centre loudspeaker".
* Press the "OK" key and then, in the settings window, use the – + key to set the
desired volume.
• Press the "OK" key to save the new setSound set.prog.po Factory settings
tings.
Sound settings, gen. Volume headphones
• Press the "TV" key to close the TV
Pict. set.,prog. posn.* Centre volume
menu.
Pict. settings, gen. HiFi output
In normal TV mode, you select the
Centre volume
55
"Sound via" options by pressing the yelSatandard value
46
Accept 55 as the standard value: OK
low key
and then using the – + key.
OK
Picture-Volume
AV devices
Station table
TV-Menü
Timer
Configuration
: select,
OK: go to
settings.
OK
32
13. Colour standard
☞
Call the menu
In a menu with two asterisks (**), the settings for the menu item "Colour standard"
cannot be changed.
MENU
Your TV set normally detects the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically. If this automatic function does not
work, you can select the colour standard manually.
The colour standard function is set in the factory
to „Automatic“.
OK
TV-Menü
Setting the colour standard:
• Select the programme position for
which you want to set the colour stan dard.
Picture-Volume
• Press the „MENU“ key to open the TV
AV devices
menu.
Station table
• Press the white key
to open the
Timer
„station table“.
Configuration
• Move the cursor to „Colour standard“.
: select,
• Press the „OK“ key to confirm your
OK: go to
settings.
selection and then, in the setting win+
dow, use the – key to select the
appropriate colour standard.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
009
008
007
006
005
004
003
002
001
MDR
SW 3
N24
PRO 7
RTL
SAT 1
Bayern 3
ZDF
ARD
Decoder
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Frequency/channel
Colour standard Automatic mode
OK
2) Available only on TV sets which are equipped
with this option.
* The number of subjects and sections
displayed here depends on the operating scope setting.
33
Call the menu
14. Display configuration
☞
MENU
In a menu with two asterisks (**), the settings for the menu items "Display configuration" and "Automatic zoom" cannot be
changed.
The green display2) can be programmed to show
the time, the station logo or the programme position number.
OK
Setting the display configuration:
• Press the „MENU“ key to open the TV
menu.
Operation
TV-Menü
Picture-Volume Function for AV*
Scope of operation
EPG settings
Automatic zoom*
HiFi output*
Init. prog. position*
Display configuration*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
: select,
OK: go to
settings.
Brightness of Display
3 Permanent display
Operation
Picture-Volume Function for AV*
Scope of operation
EPG settings
Automatic zoom*
HiFi output*
Init. prog. position*
Display configuration*
Function for F3*
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
TV-Menü
AV devices
: select,
OK: go to
settings.
Brightness of Display
OK
34
Time
3
• Press the red key
to open the menu
„Configuration“.
• Use the cursor control key to select
„Operation“ and then „Display configuration“.
• Press the „OK“ key.
• In the setting window, use the cursor
control key to select either „Display
brightness“ or „Permanent display“.
• Change the setting with the – + key.
• Press the „OK“ key to save the new
setting.
• Press the „TV“ key to close the menu.
Setting the automatic zoom
If the automatic zoom function is activated, pictures in "widescreen" format,
Permanent display Time
such as 16:9 programmes, will be
expanded automatically to fill the full
height of the TV screen.
If the automatic zoom function is deactivated, the
picture will not be expanded automatically.
2) Available only on TV sets which are equipped
with this option.
* The number of subjects and sections
displayed here depends on the operating scope setting.
15. Childlock
Call the menu
With this function, you can determine when the
TV set can be switched on and which programmes may be viewed at specific times. The childlock may be set:
MENU
a) for all programmes,
b) so that one to six programmes (Prog A ... Prog
F), called permitted programmes can still be
viewed,
c) so that all or all permitted programmes may be
viewed during a preset period (between the
specified start and end times).
OK
After setting, the childlock must be saved with a
4-digit „Code“
TV-Menü
Setting the childlock:
• Press the „MENU“ key to open the TV
Picture-Volume
menu.
AV devices
• Press the green key
to open the
Station table
menu „Timer“.
Timer
a) Setting the childlock for all programmes:
Configuration
Use the cursor control key to select
: select,
OK: go to
„Childlock“ and press the „OK“ key.
settings.
In the setting window, use the – + key
to set the childlock to „Active“.
• Press the „OK“ key to save the new setting.
End viewing time*
Start viewing time*
Code input
Permitted programmes*
Childlock
Time settings
Timer control
Reminder*
Childlock
Activation off
b) Permitted programmes
Activate the childlock as described in step a),
above.
Use the cursor control key to open the file card
„Permitted programmes“ and press the „OK“
key. In the setting window, use the numeric
keys to enter the numbers of the permitted programme positions or press the „AV“ key to permit use of the AV programme position.
• Press the „OK“ key to save the new setting.
✂
É
F
Co acto
de ry s
: 0 etti
00 ngs
0
OK
35
Call the menu
15. Childlock
c) Start and end times
Use the cursor control key to open the file card
„Start viewing time/End viewing time“„ and
press the „OK“ key. In the setting window, enter
the start and end times with the numeric keys.
OK
AV devices
Protecting the childlock settings with a code
• Use the cursor control key to open the
file card „Code input“ and press the
„OK“ key. In the setting window, enter
your personal code with the numeric
keys.
End viewing time*
Time settings
Timer control
Reminder*
Configuration Childlock
Start viewing time*
Code input
Permitted programmes*
Childlock
Picture-Volume
Station table
TV-Menü
Timer
: select,
OK: go to
settings.
Code * * * *
☞ Make a note of the code, since the
childlock can be switched off only
by entering it again!
• Press the „OK“ key to save the code.
• Press the „TV“ key to close the menu.
• Switch off the TV set with the
key.
☞ The childlock is activated only when the TV
set is switched off.
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
36
Deactivating the childlock
If the childlock is active, this is indicated by the
display of a message when you switch the TV set
on. If you then enter the correct code, the childlock is temporarily deactivated and the TV set can
be operated „normally“ as long as it remains
switched on. If you wish to permanently deactivate the childlock, proceed as follows:
• Press the „MENU“ key to open the TV menu.
• Press the green key
to open the menu
„Timer“.
• Use the cursor control key to select „Childlock“
and press the „OK“ key.
• In the setting window, use the – + key to set the
childlock to „Inactive“.
• Press the „OK“ key to save the new setting.
16. Reminder
☞
Call the menu
In a menu with two asterisks (**), the settings for the menu item "Reminder" cannot
be changed.
MENU
If you want to be reminded of something while
watching television, you can set a reminder time.
At this time, a box with the reminder appears on
the screen of the TV set.
TV-Menü
Setting the reminder time
• Press the „MENU“ key to open the TV menu.
• Press the green key
to open the
menu „Timer“.
• Use the cursor control key to select
Picture-Volume
„Reminder“.
AV devices
• Press the „OK“ key twice and then, in
Station table
the setting window, enter the desired
Timer
time (four digits) with the numeric
Configuration
keys.
: select,
• Press the „OK“ key to save the new
OK: go to
settings.
setting.
• Press the „TV“ key to close the menu.
OK
Time settings
Timer control
Reminder’
Childlock
Reminder time*
Time - - : - -
At the specified time, a box with the reminder
appears on the screen of the TV set. You can clear
this display by pressing any key.
☞ If you do not want the reminder to appear
each day, you must clear it in the menu by
pressing the ll key.
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
37
Call the menu
17. Timer control
☞
MENU
In a menu with two asterisks (**), the settings for the menu items "Switch-on time"
and "Switch-off time" cannot be changed
In the menu item „Timer control“, you can programme a switch-on time, a switch-off time and a
sleep timer (switch off after ...).
Switch-on time: the TV set is switched on at the
specified time.
Switch-off time: the TV set is switched off at the
specified time.
Switch off after ...: (Sleep Timer): the TV set is
switched off after the period you specify
(in increments of 15 minutes).
OK
Setting the times
Picture-Volume
AV devices
Time settings
Timer control
Timer
Reminder*
Configuration Childlock
TV-Menü
Station table
: select,
OK: go to
settings.
Time
OK
TV
• Press the „MENU“ key to open the TV
menu.
Switch off after ...
• Press the green key
to open the
Switch-off time
menu „Timer“.
Switch-on time
• Use the cursor control key to select
--:-"Timer control".
• Use the cursor control key to select
„Switch-on time“ or „Switch off time“.
• Press the „OK“ key twice and then, in the setting window, enter the desired time (four digits)
with the numeric keys.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
At the specified switch-on time, the TV set switches
from standby mode (red LED on) to normal TV
mode. If you do not press any key on the remote
control unit within 10 minutes, the TV set switches
back to standby mode. This ensures that the TV set
does not remain switched on if you are not at
home.
☞ If you do not want the TV set to switch itself
on or off each day, you must clear the times
in the menu by pressing the ll key.
38
18. Setting the time
Call the menu
When the TV set is switched on with the main
switch, it normally gets the date and time from the
data transmitted with the programme (if it is tuned
to a station which transmits Teletext).
If the data are not received correctly, or if the station you are watching does not send such data,
you can set the date and time manually.
Normally, this function is not needed: even the
changeover between summer and winter time is
executed automatically.
MENU
TV-Menü
OK
Setting the time and date
• Press the „MENU“ key to open the TV menu.
• Press the green key
to open the
menu „Timer“.
• Use the cursor control key to select the
Picture-Volume
file card „Set time“.
AV devices
• Press the „OK“ key twice.
Station table Time settings
• In the setting window, enter the current
Local time offset
Timer control
Timer
time with the numeric keys.
Reminder*
Current date
Configuration Childlock
• The clock starts running from this time
Current local time
when you press the „OK“ key.
: select,
You can set the date and time manually if they have not
been set automatically.
OK: go to
• Use the cursor control key to select the
settings.
file card „Current date“.
• Press the „OK“ key.
• In the setting window, enter the current date
with the numeric keys.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
The local time offset is the difference between
the local time and Greenwich Mean Time
(GMT). This time difference and any necessary
OK
switching between summer time and winter
i
time are normally detected automatically by the
TV set.
They need to be set manually only if the TV set
does not detect them automatically.
39
Call the menu
19. Function keys
The remote control has four functions keys: F1, F2
AV and F3. You can program function keys F1, AV
and F3 with any desired function.
F1
Special
Functions 1
PIP on
9-programme on
Picture format
Picture pos., vertical
Programming function key F1, AV or F3
with a desired
• Press the "MENU" key to open the TV menu.
• Press the red key
to open the "Configuration" menu.
• Use the cursor control key to select "Function for
F1, AV or F3".
• Press the "OK" key and use the cursor control
key to select one of the available functions.
• Press the "OK" key and then, in the setting window, use the - + key to set the selected function
to "On".
• Press the "OK" key to save your changes.
• Press the "TV" key to close the TV
menu.
MENU
OK
Operation
Picture-Volume Function for AV*
Function for F3*
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
TV-Menü
AV devices
: select
menu item
All F1 functions
Picture format
9-programme
PIP
The function key can be programmed with any desired
function.
* The number of subjects and sections
displayed here depends on the operating scope setting.
40
The function keys F1 and F3 are programmed in the factory with the setting
"All functions", which means that all
available special functions are displayed
when you press one of these keys.
20. Special functions
Picture-in-picture (PIP)
The remote control unit has three function keys: F1
and F3. These keys are pre-programmed in the
factory.
The PIP picture can be used to display a second
TV station or the picture from an AV device.
Call the menu
F1
1
Calling picture-in-picture (PIP) function:
• If "F1" is already programmed with
the function "Picture in picture", briefly
press the "F1" key; otherwise, hold the
"F1" key depressed until "Special functions 1" is displayed and then press
the # key to display the PIP picture.
• You can shift the PIP picture with the
cursor control keys . The current
position is saved.
• With the "OK" key, you can switch the
PIP frame to active (red) or inactive
(white).
• The contents of the PIP picture can be changed
only when the PIP frame is active (red).
If this is the case, you can use the numeric keys
or the "P+/P-" rocker key to select another programme position for display in the PIP picture.
To display the picture from an AV device connected to the TV set, press the "AV" key and
then select the AV device with the numeric keys.
• Pressing the red key
exchanges the two pictures.
• Pressing the green key
causes the PIP picture
to be displayed as the large picture and terminates the PIP function.
• To remove the PIP picture from the screen, press
the „TV“ key.
Special
Functions 1
PIP on
9-programme on
Picture format
OK
☞ If a recording has been programmed in the
timer menu, the program being recorded is
displayed in the PIP picture when the PIP
function is activated.
41
20. Special functions
9-programme overview
Call the menu
With this function, you can open an overview of
the current programme position and the next eight
positions. The nine small programme windows are
updated at intervals. Each shows a snapshot of
the current programme.
F1
Calling the 9 PRG. overview:
2
ARD
ZDF
RTL
SAT 1
!
PRO 7
MDR
• If "F1" is already programmed with the function
"9x multipicture", briefly press the "F1" key;
otherwise, hold the "F1" key depressed
until "Special functions 1" is displayed
and then press the key to display
the 9x multipicture.
BR 3
• You can use the "P+/P-" rocker key to
select the previous or following nine
programme positions.
DSF
• To switch to one of the programmes
displayed in this function, simply press
the corresponding numeric key # to
MTV
.
• To terminate the 9 Prg. overview, press the "TV"
key.
"
Not possible with an external satellite receiver!
42
20. Special functions
Picture format
Call the menu
Calling the picture format function:
• If "F1" is already programmed with the function
"Picture format ", briefly press the "F1" key;
otherwise, hold the "F1" key depressed until
"Special functions 1" is displayed and then press
the key and select the desired picture format.
• You can use the "P+/P-" rocker key to select the
various functions. You can also set the zoom
factor for the selected picture format within the
next five seconds.
• The settings made here (except for the automatic zoom in the TV menu) remain stored
until you switch to another programme
position or switch off the TV set.
Zoom
After selecting the "Zoom" function, you can
adjust the zoom factor with the – + key.
In addition to adjusting the zoom factor, you
can move the picture up or down on the
screen so that, for example, the station logo
or subtitles remain visible. To do this, press the F1 key
and then the $ key and move the picture with the
"P+/P-" rocker key.
F1
3
Special
Functions 1
PIP on
9-programme on
Picture format
Standard 4:3
This is the standard setting for all programmes
with the aspect ratio 4:3.
Panorama*
With the Panorama function, you can adjust the picture of
a programme in 4:3 aspect ratio to fill the 16:9 format of
the screen (only on sets with 16:9 screen). The picture is
expanded uniformly in the horizontal direction. You can
also zoom the picture. The Panorama function can be switched on and off in the menu "Picture and Sound" under the
heading "Picture settings, general".
16:9 full screen
This function is used to display the picture format
of external devices (such as 16:9 video recorders)
with the correct aspect ratio.
*The menu item "Panorama"
can be activated only on TV
sets which support the 16:9
aspect ratio.
43
Call the menu
21. Teletext
Teletext is a free information service provided
i by many TV stations. Within this „electronic
newspaper“, you can scroll through the pages
in various ways.
TEXT
Calling Teletext:
• Press the „TEXT“ key.
If the station you are watching transmits „TOP“ teletext, two file-card
boxes are displayed (see the picture
on the left). Otherwise, page 100
appears (see the lower picture).
• In the case of „TOP“ stations, you can
Impressum
Inhalt
select a file card with the cursor control key.
• After selecting a card, press „OK“ to
open it.
TV Guide 2
FS-Sendungen
ARD morgen
Themen
Subjects
ARD heute
Chapter
TV Guide
Sport 1
Pages
Wetter
Next BookMark
tagesschau
Set BookMark Übersicht
TV-Menü
: select Subjects / Section.
OK: display page
Controlling Teletext when the pages are displayed directly:
The blue key
is used to preselect the
subject selection function.
OK
The yellow key
is used to preselect
the section selection function.
Blue preselection key
Yellow preselection key
White preselection key
Topics Sections
100
100
Seiten
Pages
SAT.1
next
21.05.02
mark
15:30:23
OK
OK
00 01 02 03 04 05 06 07 08 09 Sub-pages
44
The white key
is used to preselect
the page selection function.
After pressing one of these preselection
keys, you can step through the subjects,
sections or pages with the rocker switch
„P+/P-“.
You can also move directly to a page
by entering its number with the numeric
keys. If multiple sub-pages exist for the
selected page, their numbers are
displayed in black. In the example on
the left, there are five sub-pages.
You can scroll through the sub-pages
with the cursor control key.
21. Teletext
Teletext: setting marks3)
You will probably have your favourite
When viewing Teletext pages, you can
Teletext pages, such as stock exchange
switch to a larger font with the F1 key.
reports, news, weather forecasts, which
The first time you press this key, the
upper third of the page is displayed with you visit frequently.
the large font. Pressing it again displays To permit rapid access to such pages,
the centre third of the page and presyou can set so-called „marks“ on these
sing it a third time displays the bottom
pages.
third of the page. Pressing the key a
To do this, first go to the page on which
fourth time returns to the full-page
you want to set the mark.
display with the normal font size.
• Then press the red key
for „Set
mark“ to set a mark on this page. A
Riddle solution key
„paper-clip“ symbol appears at the top
Function key F2 is programmed to
left corner of the page. If the page has
display hidden text on a Teletext page,
sub-pages, the mark is always set and
such as the solutions to riddles.
displayed on the currently displayed
sub-page.
Double font size
Return to last contents page
You can return directly to the last contents page at any time by pressing the
key.
Page stop
You can stop the automatic stepping
through a multiple page by pressing the
II key or the "OK" key. Pressing the same
key again restarts the automatic stepping.
Page selection with cursor
If your press the "OK" key, the page is
stopped and the cursor is displayed
at the top left corner of the screen. You
can then use the cursor keys to move the cursor within the currently
displayed page. This function is useful
for selecting pages from an index page
(such as page 100, 200, etc.). When
the cursor is positioned on the desired
page number, press the "OK" key to
display this page.
☞
Up to 10 marks can be set on each
programme position. The total
number of marks (on all programme positions) is restricted to 120.
Teletext: scrolling by marks3)
With Teletext active, you can scroll
sequentially through all marked pages by
repeatedly pressing the green key
You can even view your favourite pages
directly from the TV mode with the
„TEXT“ key. Pressing the „TEXT“ key
opens Teletext and selects the first marked
page. You can then scroll through the
marked pages with the „TEXT“ key.
Pressing the „TEXT“ key with the last marked page displayed switches back to the
TV programme.
3) Not possible with an external satellite receiver!
45
21. Teletext
Teletext: displaying active marks3)
If marks are set for a programme position, pressing
the F3 key displays a list of all marks, showing
where they are set. Pressing F3 again hides the list.
With the list displayed, you can select any desired mark with the numeric keys.
Teletext: deleting marks3)
Call the teletext page whose mark you want to
delete and press the red key
delete the mark.
„Clear mark“ to
Teletext: subtitles
Your TV set can display subtitles transmitted on
Teletext together with the programme. If such subtitles are available, the station normally displays a
message at the beginning of the programme, telling you where to find the subtitles.
• Press the „TEXT“ key to open Teletext.
• In the case of „TOP“ stations, press the „OK“
key to open any page.
• Use the numeric keys to enter the number of the
page containing the subtitles.
3) Not possible with an external satellite receiver!
46
22. AV devices
Call the menu
AV (Audio/Video) devices are devices which
i provide picture and/or sound signals for playback on your TV set (for example, video cassette recorders, DVD players, etc.).
In the menu „AV devices“, the setting window
displays a list of all common AV units.
☞
MENU
Always connect AV devices exactly as
shown in the connection diagram in the TV
menu of your TV set!
SVHS/Hi8 and Data Logic video recorders must
always be connected as „Video recorder 1“. A „normal“ VHS video recorder may be connected as
„Video recorder 1“ or „Video recorder 2“.
OK
TV-Menü
Connect as follows:
Connecting AV devices
Back of TV set
• Press the „MENU“ key to open the TV
menu.
Picture-Volume
Euro1
• Press the yellow key
to open the
devices
AV de
Euro2
RGB
menu „AV devices“. Some of the
Euro3
Station table
Data Logic
EURO sockets are pre-programmed in
FBAS
Timer
the factory (see the picture on the
Front of TV set *
Configuration
right). If you want to change these setSVHS/Hi8
tings, you can select one of the AV
Select device
Select a new device:
and
DVD/Videorec. 1 1 DVD
devices with the cursor control key and with
DVD/Videorec. 2 Decoder
call device atAV-Receiver / CD PC
tributes with OK
delete it by pressing the ll key.
• Use the cursor control key to select the
device you wish to connect to the TV set.
• Press the „OK“ key to confirm your selection
and, in the setting window, set the parameters
„Signal OUT“ and „Signal IN“ to match the AV
device (see the operating instructions for the AV
device for details).
• Press the „OK“ key. The newly connected device
OK
appears in the connection diagram.
☞
DVD player
DVD/Videorec. 1
Camcorder/Photo
Satellite / SetTop
Camcorder/Photo
Other device
Caution: connecting a new device may
cause an existing connection to be modified. If this happens, you will have to move
the cables for the affected AV device to the
correct positions.
47
Call the menu
☞
22. AV devices
In a menu with two asterisks (**), the settings for
this menu item cannot be
changed.
MENU
OK
Operation
Picture-Volume Function for AV*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
TV-Menü
: select Subjects / Section.
OK: display page
Data Logic video recorder
„Data Logic“ is a system which permits a dialogue
i between the TV set and a video recorder. This
„intelligent“ system provides such functions as:
- Automatic transfer of the settings for terrestrial
and cable stations to the video recorder.
- One-touch recording: the video recorder records
the programme you are currently watching.
- Automatic switching to the AV programme position.
- Direct control of recording from the timer menu
of the TV set.
- Automatically switching off the video recorder
when the TV set is switched to standby mode.
Under "Video recorder 1" in the menu "AV devices", set the field "Data Logic" to "On" and connect your video recorder to the EURO
socket as shown in the picture.
Other comparable dialogue systems:
Qlink (Panasonic), EasyLink (Philips),
Megalogic (Grundig, SMARTLINK (Sony).
DataLogic
Terr. station search
Data transfer start Yes
•
•
•
•
OK
•
* The number of subjects and sections
displayed here depends on the operating scope setting.
48
•
Data Logic: transferring the station
table
• Press the „MENU“ key to open the TV
menu.
Press the red key
to open the menu
„Configuration“.
Use the cursor control key to select „Automatic
station search“.
Press the „OK“ key and then use the cursor control key to select „Data Logic“.
Press the „OK“ key and then, in the setting window, select „Start data transfer: yes“ with the
– + key.
Press the „OK“ key to transfer the stations table
from the TV set to the video recorder
Press the „TV“ key to close the TV menu.
22.1 AV playback
Call the menu
AV playback
(Devices with switching voltage)
AV playback is the term for playing back videocassettes, DVDs, etc. from an AV device for viewing them on a TV set.
In order to view the pictures, you must programme your TV set so that it automatically switches to
the AV programme position when a signal is
received at the EURO socket to which the AV
device is connected.
Programming automatic switching
In a menu with two asterisks (**),
the settings for this menu item cannot be changed.
• Press the „MENU“ key to open the TV
menu.
TV-Menü
Programme switching is set to
"On" in the factory for both EURO
sockets.
OK
Operation
Picture-Volume Function for AV*
Function for F3*
AV devices
Function for F1*
Station table EURO sockets*
Station search
Timer
Country*
Configuration Language*
☞
☞
MENU
: select Subjects / Section.
OK: display page
• Press the red key
to open the menu
„Configuration“.
• Use the cursor control key to select „EURO
socket“.
• Use the cursor control key to select "EURO 1"
"EURO 2" or "EURO 3".
• Press the „OK“ key and then, in the setting window, set „Programme switching“ to „ON“ with
the – + key.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the TV menu.
When you subsequently start a playback operation on the connected AV device, the TV set switches to playback mode, regardless of the currently selected programme position.
EURO 3
EURO 2
EURO 1
Change station on
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
49
Call the menu
22.1 AV playback
This mode remains active until the TV set is switched to another programme position.
AV
AV playback
(Devices without switching voltage)
In order to view the pictures, you must manually
switch your TV set to playback mode.
AV-menu Playback
• Select any programme position.
Videorecorder 1
Euro1
• Press the „AV“ key.
Videorecorder 3
%
• Press the numeric key for the desired AV
Euro3
device.
DVD
• The TV set now switches from the curEuro2
rent programme to playback mode.
Camcorder
Front of TV set
• Start the playback operation on the
Pr1 ARD
AV device. Playback mode remains
record?
active until you switch to another programme position.
Picture quality when playing back from
tape machines
☞
50
In a menu with two asterisks (**), the settings for
the menu item "VCR" cannot be changed.
The VCR function provides the best possible picture
quality when playing back recordings from a tape
machine, such as a camcorder or video recorder.
Setting the VCR function
• Select the appropriate programme position.
• Press the „MENU“ key to open the TV menu.
• Press the „OK“ key to open the menu „Picture
and sound“.
• Use the cursor control key to select „Picture settings for Pr xy“.
• Press the „OK“ key and then use the cursor
control key to select „VCR“.
• Press the „OK“ key for confirmation and use the
– + key to select „Opt. 1“. If this setting does
not produce a satisfactory picture quality,
switch to „Opt. 2“.
• Press the „OK“ key to save the new setting.
22.2 Copying between AV
devices
• Select any programme position.
• Press the „AV“ key to display the „AV menu
Playback“.
• Select the AV playback device with the numeric
keys.
• The TV set switches from the current programme
to the selected playback device.
• Press the „AV“ key again.
• Then press the red key
to select the recor-
ding device.
• Press the green key to lock the selected signal
connection. If a Data Logic video recorder is
connected, it will immediately start to record,
providing there is a cassette with a protection
tag inserted.
• Start recording with the recording AV device.
• Play back with the playback AV device.
51
23. EPG - NexTView
NexTView is an Electronic Program Guide (EPG)
for all important programme providers. This EPG is
transmitted by various stations and also contains
the programme data for the other stations.
The TV set needs about 20 minutes to collect the
large amount of data for the first time.
• On TV sets with two tuners (standard configuration) the data are collected by the second tuner
(see the next page) during normal operation of
the TV set. When the data have been collected,
the TV set stores the EPG in a special memory.
The EPG is updated regularly in this memory as
long as the TV set is not switched off with the
main switch.
• On TV sets with only one tuner (e.g. if your set
has been converted and has only one satellite
tuner):
- the set must be left tuned to the NeexTView programme position for at least 20 minutes, or
- the data are collected during the night (between
02:30 - 03:00) while the set is in standby mode.
Not possible with an external satellite receiver!
52
23.1 Activating the EPG NexTView
Call the menu
The EPG function can be switched on and off as
desired. It is set to "On" in the factory.
On all programme positions where NexTView is
received, the TV set displays the following message
after a short delay:
EPG
MENU
This station is sending NexTView (EPG). Save it as
the EPG programme position?
• Yes
• No
TV-Menü
The TV set is asking you whether you want to use
this programme position for collecting the data for
the EPG NexTView.
Press the red key for "No" - this programme position is not used for receiving
the NexTView data. The message is still
displayed for all other programme posiPicture-Volume
tions where NexTView data are received.
AV devices
Press the green key for "Yes" - this proStation table
gramme position will be used for receiTimer
ving the NexTView data. The message is
Configuration
then not displayed for other programme
positions where NexTView data are
: select menü
item
received.
If you know the programme position for a
NexTView station, you can also enter its number
directly on the numeric keys.
You can overwrite any existing programme position number or delete the number by pressing the II
key.
OK
Operation
Function for AV*
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Language*
EPG
EPG prog. position
Now showing
Scope of operation
EPG settings*
Automatic zoom*
HiFi output*
Init. prog. position*
Display configuration
on
6
on
RTL 2
OK
* The number of subjects and sections
displayed here depends on the operating scope setting.
Not possible with an external satellite receiver!
53
23.2 Collecting NexTView data
The EPG NexTView is transmitted by
various stations and the information provided by each station may differ. You
thus have a choice between several different NexTView programme guides.
• On TV sets with only one tuner (e.g. if
your set has been converted and has
only one satellite tuner):
Switch to the NexTView programme
position.
Leave it on this programme position
for at least 20 minutes.
• TV sets with two tuners:
The TV set collects the NexTView data
with the aid of its second tuner.
- the Teletext function "Subtitles" is active.
If the TV set is switched to standby mode
during data collection, the text
"NexTView" appears on the green
display to remind you that the data-collection operation is still running.
Special notes:
Stations which are listed in the TV station
list of the TV set with an automatic logo
(set automatically by the TV set) are also
shown in the EPG. Stations which carry
two different programmes (such as a
children’s programme in the daytime
and another programme in the evening)
must be stored in two different programme positions.
The collection operation is interrupted or
cancelled if:
- you switch the programme position
from terrestrial to SAT or vice versa;
- you call the "Picture in Picture" function;
- you open the Teletext function;
- a recording is programmed in the
menu "AV recording";
- a "timer recording" is running or will
begin within the next hour;
Not possible with an external satellite receiver!
54
23.3 Using NexTView
Call the menu
NexTView
Once all of the data have been collected, pressing the "EPG" key displays the NexTView programme guide, showing the programme currently running on this programme position.
The left column of the EPG shows the keys with
special functions in this mode:
P+/P- Select a programme
OK
Watch the selected programme or set a
reminder for it
Cursor control key Scroll forward
or back through the programme times
0-9
Enter a time for which programAll
programmes
mes are to be displayed
Selection
TV
Return to the TV picture
Interest
blue Display all programme types
Users
yellow Display only programme types
Record
which match the current user
and their preferences
0..9: enter time
:select
white Set user preferences
OK: view
green Select a user (father, mother,
teenager, child)
red
Selected programme is ready for recording (see Page 55)
EPG
Heute
20:07
- Mo Di Mi Do Fr Sa So + 13.08
20:00 RTL 2
RTL II News
20:00 ARD
Tagesschau
20:00 Nord 3
Tagesschau
20:00 West 3
Tagesschau
20:00 3 SAT
Tagesschau
-20:15
-20:15
-20:15
-20:15
-20:15
News
Selecting and viewing a programme, setting a
reminder
In the EPG, you can select a programme with the
"P+/P-" rocker key.
• By pressing the "OK" key, you can
- watch the programme if it is already running or
- set a reminder for it if it starts later. In this case,
a green check mark appears after the start
time.
Not possible with an external satellite receiver!
55
23.3 Using NexTView
Setting the user
By repeatedly pressing the green key, you can set
the current user (father, mother, teenager, child)
for the NexTView programme guide.
NexTView
Setting preferences
Music
Education
All programmes Children/School
Sport
Selection
Leisure
Shows
Interest
Current affairs
Users
Feature film
Record
Station selection
✓ MDR
✓ PRO 7
✓ RTL 2
✓ RTL
✓ SAT 1
✓ Bayern 3
✓ ZDF
✓ ARD
✓ Display all stations
Up to eight stations
can be selected
Each user can set the NexTView programme guide to reflect the personal
preferences.
• Press the white key
.
• Use the "P+/P-" rocker key to select
one of the blue cards.
• Use the cursor control key to switch to
the yellow page.
• Use the "P+/P-" rocker key to select
the appropriate yellow cards and
mark each one by pressing the "OK"
key.
☞
Music
Education
All programmes Children/School
Sport
Selection
Leisure
Shows
Interest
Current affairs
Users
Feature film
Record
Station selection
NexTView
Select subjects
with
and OK
✓motor sports
✓team sports
✓tennis/squash
✓football/soccer
Up to eight preferences can be selected for
each user.
• You can remove the red check marks again by
pressing the "OK" key.
• Save the selected preferences by pres✓ water sports
sing the red key
.
✓ motor sports
✓ athletics
✓ team sports
✓ tennis/squash
✓ football/soccer
✓ sport magazine
✓ special events
✓ sport (general)
✓sport magazine
✓special events
✓winter sports
✓local sports
Not possible with an external satellite receiver!
56
23.3 Using NexTView
Recording a programme
NexTView
If you have a Metz video recorder with dialogue
system, the NexTView programme guide permits
you to start a recording by pressing a single key.
• Open the NexTView programme guide.
• Use the "P+/P-" rocker key to select the programme you want to record.
If a video recorder with dialogue system is connected:
- Switch on the video recorder.
- Insert a cassette.
- Press the red key
on the remote control of
the TV set.
If a normal video recorder is connected:
All programmes
- Switch on the video recorder.
Selection
- Insert a cassette.
Interest
- Press the red key
on the remote
Users
control of the TV set - the TV timer is
programmed.
Record
- On the video recorder programme
0..9: Zeit wählen
:auswählen
a timer with the date and time on
OK: ansehen
the AV programme position so that
the programme provided by the TV
timer will be recorded.
☞
Call the menu
EPG
OK
Heute
20:07
- Mo Di Mi Do Fr Sa So + 13.08
20:00 RTL 2
RTL II News
20:00 ARD
Tagesschau
20:00 Nord 3
Tagesschau
20:00 West 3
Tagesschau
20:00 3 SAT
Tagesschau
-20:15
-20:15
-20:15
-20:15
-20:15
Nachrichten - News
If you want to record a programme from a
terrestrial station (received via antenna or
cable), you must programme the video
recorder itself.
Not possible with an external satellite receiver!
57
Call the menu
24. Sat system
MENU
i You must use the menu „SAT system“ to inform
the TV set of the settings for the SAT system.
These settings should always be made in the
order indicated by the yellow file cards, i.e. LNB
supply, DiSEqC control, etc.
OK
Operation
Function for AV*
Picture-Volume Function for F3*
Function for F1*
AV devices
EURO sockets*
Station table Station search
Sat system
Timer
Country*
Configuration Language*
TV-Menü
: select,
OK: go to
settings.
LNB voltage H 18V+
LNB supply voltage
LNB supply voltage
The LNB supply voltages for selecting the polarisation (horizontal H = 18 V, vertical V = 12 V) are
fixed and do not normally need to be changed.
If it should be necessary to change these
voltages, note the following setting
sequence.
LNB freq., sat. A
22kHz signal
DiSEqC system
LNB supply voltage
Changing the settings
• Press the „MENU“ key to open the TV
menu.
• Press the red key
to open the menu
„Configuration“.
LNB voltage V 14VEin
• Use the cursor control key to select
„SAT system“.
• Use the cursor control key to select „LNB supply“ and press „OK“ to confirm your selection.
The cursor is now located before the entry „LNB
voltage H“ in the setting window.
• You can now adjust the voltage slightly up (+)
or down (-) with the – + key.
• Press the „OK“ key to save the new setting.
☞
If your TV set is connected to a community
satellite system, the LNB supply voltage
must always be set to „Off“.
Possible only if a satellite upgrade kit is installed!
58
24. Sat system
Call the menu
DiSEqC system
The DiSEqC system permits your TV set to control the SAT system via the existing antenna
cable. It is a prerequisite for reception from
more than two satellites (e.g. reception from
Astra, Eutelsat and Hotbird).
i It is not yet necessary to upgrade SAT systems
which are used only for reception from Astra.
Control of the SAT system for reception from
three or more satellites (e.g. Astra on 19.2°
Eutelsat on 16° and Hotbird on 13°) is no longer possible without DiSEqC.
Switching the DiSEqC system on and off
• Press the „MENU“ key to open the TV
menu.
OK
Operation
Function for AV*
Picture-Volume Function for F3*
Function for F1*
AV devices
EURO sockets*
Station table Station search
Sat system
Timer
Country*
Configuration Language*
TV-Menü
• Press the red key
to open the menu
„Configuration“.
• Use the cursor control key to select
„SAT system“.
Change value with
• Use the cursor control key to select
+ and Confirm with OK
„DiSEqC system „ and press „OK“ to
confirm your selection. The cursor is
now located before the entry „DiSEqC system“
in the setting window.
• Use the – + key to select „Yes“ or „No“.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the TV menu.
LNB freq., sat. B
LNB freq., sat. A
22kHz signal
DiSEqC system
LNB supply voltage
DiSEqC system Yes
Possible only if a satellite upgrade kit is installed!
59
Call the menu
24. Sat system
22 kHz signal/toneburst signal
MENU
Operation
Function for AV*
Picture-Volume Function for F3*
Function for F1*
AV devices
EURO sockets*
Station table Station search
Sat system
Timer
Country*
Configuration Language*
TV-Menü
: select,
OK: go to
settings.
22 kHz signal
22 kHz sign. for
OK
These two signals are needed only for Sat systems
equipped with a multiswitch.
The 22 kHz signal should be used for switching beti ween the upper and lower frequency bands (called
the high band and the low band). The toneburst signal should be used for switching between satellites
(e.g. Astra and Eutelsat) in different positions.
The settings depend on the components
used in the Sat system and it may be
necessary to reverse the signal assignments.
LNB freq., sat. B
LNB freq., sat. A
22kHz signal
DiSEqC system
LNB supply voltage
Switching the 22 kHz and toneburst
signals on and off
• Use the cursor control key to select
„22 kHz signal“ and press „OK“ to
On Tone burst signal On
Freq.band
confirm your selection. The cursor is
now located before the entry „22 kHz
signal“ in the setting window.
• Use the – + key to switch this signal „On“ or
„Off“.
• If you select „On“, you must specify, in the
second line, whether the 22 kHz signal is to be
used for the „Frequency band“ or the „Position“.
• You can then programme the toneburst signal in
a similar manner, selecting the other function.
• Press the „OK“ key to save the new settings.
Possible only if a satellite upgrade kit is installed!
60
Call the menu
24. Sat system
LNB frequencies for Sat A, Sat B, etc.
The LNB frequencies are used for switching between the high band and the low band. In the factory, these frequencies are set to the standard
values of 9.75 GHz for the low band and
10.60 GHz for the high band.
The settings depend on the components used in
the Sat system. Please consult the data sheets or
the label attached to the LNB(s) for details of the
correct settings.
TV-Menü
Setting the LNB frequencies
• Use the cursor control key to select
Picture-Volume
„LNB freq. Sat A“ and press the „OK“
AV devices
key to confirm your selection. The curStation table
sor is now located before the entry
Timer
„Low band“ in the setting window.
+
Configuration
• Use the – key to set the frequency to
: select,
the correct value.
OK: go to
settings.
• Use the cursor control key to switch to
„High band“ and use the – + key to
set the frequency to the correct value.
• Press the „OK“ key to save the new settings.
OK
Operation
Function for AV*
Function for F3*
Function for F1*
EURO sockets*
Station search
Sat system
Country*
Language*
LNB freq., sat. B
LNB freq., sat. A
22kHz signal
DiSEqC system
LNB supply voltage
Low band 9,75 GHz
High band 10,60 GHz
Possible only if a satellite upgrade kit is installed!
61
Call the menu
Most of the common Sat programmes are already
stored in the TV set. These programmes are divided into groups as shown in the right-hand
column of the picture on the left. Each of these
groups can be read in only in its entirety
MENU
OK
Operation
Function for AV*
Picture-Volume Function for F3*
Function for F1*
AV devices
EURO sockets*
Station table Station search
Sat system
Timer
Country*
Configuration Language*
TV-Menü
: select,
OK: go to
settings.
OK
25. Automatic Sat station search
Starting the station search
• Use the cursor control key to select the desired Sat
station card (in the example on the left: Astra) and
press the „OK“ key to confirm your selection.
• Press the „OK“ key again to load the selected
Sat stations.
• After all stations have been loaded,
they are displayed in a station list.
• If desired, you can then select indiviDataLogic
Hotbird radio
dual stations and delete them by presHotbird TV
sing the ll key.
ADR
• Press the „OK“ key to confirm that you
Astra radio
want to save the remaining stations.
Astra TV
Terr. station search
• Use the numeric keys to enter the
number of the programme position in
Sation search (START)
which the first station in this list is to
be saved. The other stations in the list
will be saved in the programme positions following the selected position.
CAUTION! This will overwrite any stations currently in the specified and following positions!
• If you are not sure whether you want to save
the stations, you can cancel the operation by
pressing the „TV“ key.
• If you want to save the stations in the list, press
the „OK“ key.
If you are not satisfied with the order in which the
Sat stations are saved, see the section „Sorting
stations“.
Possible only if a satellite upgrade kit is installed!
62
26. Specific Sat station search
Call the menu
In the menu „Station table“, you can search for
individual Sat stations or enter their parameters
manually.
MENU
Direct frequency input or starting the station
search
• Press the „MENU“ key to open the TV menu.
TV-Menü
• Press the white key
to open the station table.
• Use the cursor control key to select an empty
programme position or a programme position
which you want to change.
• Press the „OK“ key twice and then use
the – + key to set the reception type to
„TV Sat“.
Picture-Volume
• Press the „OK“ key. The cursor is now
AV devices
located before „Reception type“.
Station table
• Use the cursor control key to select
Timer
„Frequency“.
Configuration
• Press the „OK“ key, use the cursor
Change value with
control key to select „search“ and start
+ and +
the station search with the – key. Or: Confirm with OK
select the various menu items with the
cursor control key and then use the – + key or
the numeric keys to set the individual parameters.
• Press the „OK“ to save the new station.
• Press the „TV“ key to close the TV menu.
OK
Polarisation
Freq. Band
Satellit
V
Low
A
AFC
Ein
Frequency
11.348 GHz
Scan operation
3 Sat
OK
Possible only if a satellite upgrade kit is installed!
63
Call the menu
27. One-touch Sat recording
Most video recorders do not have a satellite receiver, which means that they cannot directly record
a programme from a satellite station.
However, you can record such a programme with
the aid of the OTR (one-touch recording) function
of your TV set.
AV
AV menu Playback
Videorecorder 1
EURO1
DVD / CD
EURO2
Pr 23 ARD
record ?
• Press the red key
to make this Sat
station available for recording.
• The last signal connection you made is
now displayed. If this is not the one
you want, use the numeric keys to
select the correct connection.
• Press the green key
to save the connection.
save the connection?
If you have a Data Logic video recorder, recording starts automatically (providing there is a cassette in the recorder).
If you have a standard video recorder,
switch to the AV programme position
and start a one-touch recording (OTR).
change the recording device?
• Press the „TV“ key to close the menu.
AV menu Record
The signal connection is protectedand remains active even in
standby mode. You cannot
select all of the available devices. Wuold you like to ...
ARD
Pr 23
Videorecorder
• Select the programme position for the
Sat station whose programme you
want to record.
• Press the „AV“ key to open the menu
„AV playback“.
☞
Do not switch your TV set to a different programme position while
recording, since this will cause the
wrong programme to be recorded.
Possible only if a satellite upgrade kit is installed!
64
28. Sat timer recording
Call the menu
key to select the recording device.
• Press the „OK“ key to save the settings.
• Press the „TV“ key to close the menu.
TV-Menü
If your TV set is equipped with a satellite receiver,
you can use the“Sat timer recording“ menu in the
TV to.record satellite programmes on your video
recorder.
• Press the „MENU“ key to open the TV menu.
• Press the green key
to open the menu
„Timer“.
• Use the cursor control key to select „Sat timer
recording“.
• Press the „OK“ key and then use the cursor
control key to select one of the timers.
• Press the „OK“ key and then, in the
setting window, use the numeric keys
to enter the programme position and
Picture-Volume
the start and end times*. Use the – +
MENU
OK
Timer 8
Timer 7
Timer 6
AV devices
Timer 5
Time settings
Timer 4
Station table Timer control
Timer 3
Reminder
Timer
Childlock
Timer 2
Configuration Sat timer recording Timer 1
Change device
If you have a Data Logic video recorder,
with + and the TV set will automatically start the
recording on the video recorder at the
specified time. If you have a standard video
recorder, you must also programme the recording
on the video recorder. In this case, specify as the
source the AV programme position (e.g. AV1) to
which your TV set is connected.
For VPS recordings, the TV set switches to the
recording state one hour before the specified start
time, so that it can react if the programme you
want to record starts earlier than planned. If you
have programmed a timer recording, do not
switch off the video recorder with its main switch.
Program
25
VOX
Date
30.01.
Time of day
Device
20:15-21:00 Videorecorder
VPS
OK
* Please note, for VPS recordings, that you must enter the
VPS start time as the start
time for the recording.
Possible only if a satellite upgrade kit is installed!
65
Call the menu
29. Initial programme position
You can define a so-called initial programme
position in this TV set. This is intended primarily
to enable you to switch to the AV programme
position when you are using an external Sat
receiver.
MENU
Setting the initial programme position
☞
TV-Menü
OK
Operation
Function for AV*
Picture-Volume Function for F3*
Function for F1*
AV devices
EURO sockets*
Station table Station search
Sat system
Timer
Country*
Configuration Language*
Scope of operation
EPG settings
Automatic zoom
HiFi output
Init. prog. position
Display configuration
: select menu
item
In a menu with two asterisks (**), the settings for this menu item cannot be changed.
Switch on with this station? Yes
In the menu „AV devices“ (see also section 22, „AV devices“), select and connect a Sat receiver (Sat/SetTop).
• Press the „AV“ key.
• In the „AV playback menu“, use the
numeric keys to select the position
„Sat/SetTop“.
• Press the „MENU“ key to open the TV
menu.
• Press the red key
to open the menu
„Configuration“.
• Use the cursor control key to select „Operation“
and then „Initial programme position“.
• Press the „OK“ key and then, in the setting window, use the – + key to select „Yes“.
• Press the „OK“ key to save the new setting.
OK
66
☞
After this, the AV programme position will
be selected automatically if you switch
your TV set on with the main switch and
then press the
key on the remote control unit.
30. Operation without the
remote control unit
The following procedures are intended only for
cases where the batteries of the remote control
unit are exhausted or the remote control unit is
not available.
The TV controls are at the front of the set. Depending on the TV model, they are located underneath a cover which can be opened by pressing at
the marked position.
F
-
+
Switching on
Press the main switch on the TV set to switch the
set to standby mode. To switch the set on with programme position 1 selected, press and hold the F
key until the green display lights up.
You can also execute the following functions with
the controls on the front of the TV set. The preselected function remains active for 10 seconds.
Changing programme positions:
Press the – + keys.
Volume:
Press the preselection key F until the bar display
for volume appears on the screen. Then press the
- or + key to adjust the volume.
Contrast:
Press the preselection key F until the bar display
for contrast appears on the screen. Then press the
- or + key to adjust the contrast.
67
31. Technical data
Mains voltage:
230 V ˜ 50 / 60 Hz
240 V ˜ (Australia only)
Antenna input::
75 Ohms unbalanced
DIN 45325
Reception bands:
Standard channels 2 - 12,
21 - 69
Special channels S1 - S20,
S21 - S41,
S42 .. S46 (Belgium OIR channels)
Power consumption
(to CENELEC/TC
59 X)
Music output power
to DIN 45324
into 4Ω( at 1 kHz
(sinusoidal power)
Power
consumption:
Spectral-72
Corum-72
ca. 140 W
2 x 20 + 40 W
(2x12 + 24 W)
Astral-72
ca. 140 W
2 x 20 + 40 W
(2x12 + 24 W)
Spectral-82
ca. 135 W
2 x 20 + 40 W
(2x12 + 24 W)
Spectral-84
ca. 170 W
2 x 20 + 40 W
(2x12 + 24 W)
Artos-82
ca. 135 W
2 x 20 + 40 W
(2x12 + 24 W)
Power consumption per hour:
See power consumption in Wh.
Standby mode: approx. 1.7 W
68
32. Options
• Satellite upgrade kit 081 NH 1017
for reception of satellite stations without the need
for a separate Sat receiver.
• Satellite upgrade kit 083 NH 1014
similar to the above, but also capable of receiving unencrypted ADR (Astra Digital Radio) stations.
• DVB-S upgrade kit 025 NK 1014 (CI)
or 025 NL 1138
for reception of analogue and digital satellite stations broadcasting TV and radio programmes
without the need for a separate Sat receiver.
• DVB-T upgrade kit 057 NH 1118 (CI)
for the reception of digitally transmitted terrestrial
TV and radio stations which can be received with
a rod antenna or a terrestrial house antenna
without the need for an separate receiver.
• TV-HDR upgrade kit 010 NK 1014
This kit is for installation of a hard disk on which
programmes can be recorded and managed. The
hard disk feature also permits time-shift operation
and the remote programming (at extra charge) of
your TV set.
For other upgrade kits, please consult your local
dealer.
Important note for users of the TV set:
Unauthorised modification of this TV set, in particular changing the high voltage or using a CRT of
a different type, can result in the emission of high
levels of X-ray radiation. TV sets modified in this
manner no longer conform to the official approval for operation and may not be used.
69
33. Connecting headphones
The headphone socket is located on the front of
the TV set. On many models, you must first open
a cover by pressing at the marked location in
order to expose the socket.
We recommend using headphones with an impedance of at least 32 Ω. The use of headphones
with a lower impedance (about 8 Ω) will reduce
the dynamic range.
The headphone volume can be saved as one of
the standard settings. In the case of dual-language programmes, you can listen to either sound
channel 1 or 2 on the headphones, regardless of
the channel selected for the loudspeakers.
34. Cleaning the TV set
☞
Always switch off the TV set with the main
switch before cleaning it!
Clean the case of the TV set only with a soft, dry
(or slightly moistened) cloth. Do not use aggressive detergents or scouring powders, since these
could damage the paintwork and/or remove the
inscriptions. Clean the screen with a moist window leather.
70
35. Glossary
AV programme position
AV devices have one or more sockets, depending
on the model. These sockets are labelled on the
device, for example with AV1.
These sockets can be selected on the AV device
and the selected socket is shown on the display of
the AV device, for example A1 for socket AV1.
Bandwidth (optional)
The bandwidth needs to be set for sound sub-carriers. For ASTRA stations, the bandwidth should
normally be set to 130 kHz.
Stereo wide
When receiving programmes with stereo sound,
the physical distance between the loudspeakers
can be increased artificially to improve the stereo
effect.
Code
The settings for the childlock are protected by a 4digit numerical code which you can set a desired.
Write down or remember the code you define. If
you forget the code, ask your local dealer for assistance
CTI
The CTI (Colour Transient Improvement) circuit is
an electronic circuit which ensures precise transitions between differently coloured parts of the picture, preventing the colour smearing which could
otherwise occur. The CTI function is active for programmes received via the antenna input and for
picture signals from AV devices.
De-emphasis (optional)
This is a method for reducing noise on the sound
channel of stations received via satellite. The
appropriate settings can be found in specialist
magazines.
For ASTRA stations, always select „Panda“.
71
35. Glossary
Tone settings
You can switch the tone settings between „Normal“ and „Speech“.
Volume correction
The sound signals from different stations may vary
considerably in their volume. You can correct the
volume of a particularly loud or soft station so that
it is similar to that of the other stations. The volume
correction remains active even when the standard
values are recalled.
Standard settings
Standard settings are all values (such as brightness, volume, chrominance, etc.) which are the
same for all programme positions.
Spatial sound
An artificial stereo effect can be generated for
mono transmissions.
Noise reduction
This setting can be used to improve the quality of
pictures with „snow“ or other noise resulting from
poor reception conditions. Depending on the
amount of interference, various correction facilities
are available and the noise reduction can be set
individually for each programme position.
VCR
The VCR function ensures optimum picture quality
when playing back recordings from tape devices
such as camcorders and video recorders.
Video level (optional)
The video level adjustment can be used to achieve
a uniform contrast for Sat stations with varying
modulation levels. However, this adjustment affects
only the signal at the EURO sockets and the correct setting must be determined by trial and error
(by making test recordings).
72
35. Glossary
Forced mono
In some cases, your TV set may switch from mono
to stereo during a programme, although the station is not transmitting a stereo signal. This is normally due to the local reception conditions. If you
activate „forced mono“ for the selected programme positions, all programmes will be reproduced
in mono, regardless of the received signal.
Film mode
The function "Film mode" improves the picture
quality when viewing black-and-white programmes and cinema films. Moving objects are
displayed more smoothly and the picture looks
more plastic. This function is set in the factory to
"Automatic". For normal TV programmes, the
automatic setting switches the film mode off. We
also recommend setting film mode to "Off" when
playing back "noisy" films from a video recorder.
Progressive Scan
This function improves the sharpness and contrast
of the picture, particularly when playing back
films from a DVD player which is connected via
YUV (see page 75). For watching normal TV programmes, the progressive scan function should be
set to "Automatic".
73
Problem
Possible cause
The TV set does not • There is no visual contact betreact to commands
ween the remote control unit
from the remote conand the TV set.
trol unit.
• Sunlight is falling directly on
the infrared of the TV set.
• The batteries in the remote
control unit are exhausted.
• The TV set has been switched
off with the mains switch.
• The microprocessor is faulty.
Remedy
• Ensure that there are no
obstacles.
• Avoid direct exposure
to sunlight.
• Replace the batteries.
• Switch on the TV set
with the mains switch.
• Switch the TV set off
with the mains switch
and then switch it on
again.
Unnatural colours,
coloured spots on
the screen
• Strong magnetic fields in the
vicinity of the TV set (from
loudspeakers or other devices)
• Move the loudspeakers
away from the TV set.
• If the coloured spots persist, switch the TV set off
with the mains switch, wait
a few seconds and then
switch it on again.
After the TV set has
been switched on,
the message „Please
enter code“ is
displayed.
• The childlock function has
been programmed to prevent
selection of any station.
• Enter the code number
with which the childlock
function was programmed.
The TV set does not
switch to the selected
programme position.
Instead, a list of stations is displayed with
a teddy-bear symbol.
• The childlock function has
been programmed to permit
selection of only the stations
shown in the list.
• Enter the code number
with which the childlock
function was programmed.
You are playing back a • The picture format for the AV
film from an AV device
programme position (e.g.
in the aspect ratio
AV2) has not been set correct16:9, but the picture is
ly in the TV menu.
displayed in the 4:3
format.
74
• Select the AV programme position and set the
picture format to 16:9
or "Automatic" (see
Section 11.1).
Problem
Possible cause
Remedy
Immediate recording • The Data Logic video recorder
of a terrestrial stais not connected to the house
tion (received via
antenna or cable outlet.
your house antenna
or cable) with Data
Logic does not work.
• Connect the Data Logic
video recorder to the
house antenna or cable
outlet with the aid of an
antenna cable.
General problems
with an external AV
device connected to
the TV set.
• The AV device has not been
set up correctly in the TV set.
• In the menu „AV devices“, select the appropriate device with the
cursor, set the „Signal
OUT/IN“ accordingly
and press the „OK“ key.
Connect the AV device
only as shown in the
connection diagram.
Data Logic does not
work.
• The Data Logic video recorder
with data interchange has not
been set up correctly in the TV
set.
• In the menu „AV devices“, define the Data
Logic video recorder as
video recorder 1 with
„Datalogic ON“.
• The Data Logic video recorder
is not connected to the EURO
socket (see av Menu)
• The Euro-AV (Scart) cable
being used does not have all
21 pins connected.
• Connect the Data Logic
video recorder to the
EURO socket with a
Scart cable.
• Use a Euro-AV (Scart)
cable with all 21 pins
connected.
75
Connecting facilities at back-panal of TV-sets
HiFi out –
to connect an
HiFi-amplifier
Service-socket –
for service-technician
76
Center in –
external Surround-set
Video in –
component-signal
(f.e. DVD-player)
Audio in –
if cinch sockets are in use,
scart-socket 1 is switched of
Speaker-sockets –
for external speakers,
impedance 4Ohm
(f.e. Metz 10LH10)
Index
16:9 full sreen . . . . . . . . . . . . . . . . . . . . . .43
22 kHz signal . . . . . . . . . . . . . . . . . . . . . .60
9 PRG. overview . . . . . . . . . . . . . . . . . . . .42
Automatic Sat station search . . . . . . . . . . . .62
Automatic station search . . . . . . . . . . . . . . .18
AV devices, connecting . . . . . . . . . . . . . . . .47
AV programme position . . . . . . . .48,64,66,71
AV playback, devices with switching voltage .49
AV playback, devices without switching voltage .50
Bandwidth . . . . . . . . . . . . . . . . . . . . . . . .71
Batteries for remote control unit . . . . . . . . . . .5
Camcorder, connecting . . . . . . . . . . . . . . . .47
Centre loudspeaker . . . . . . . . . . . . . . . . . .32
Childlock . . . . . . . . . . . . . . . . . . . . . . . . .35
Cleaning the TV set . . . . . . . . . . . . . . . . . .72
Code for childlock . . . . . . . . . . . . . . . . . . .36
Colour standard . . . . . . . . . . . . . . . . . . . .33
Connecting external devices . . . . . . . . . . . .47
Copying recordings . . . . . . . . . . . . . . . . . .51
Country . . . . . . . . . . . . . . . . . . . . . . . . . .17
CTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Cursor . . . . . . . . . . . . . . . . . . . . . . . . .12,13
Data Logic video recorder . . . . . .47,48,57,65
Decoder, connecting . . . . . . . . . . . . . . . . . .47
Decoders (see AV devices) . . . . . . . . . . . . .47
De-emphasis . . . . . . . . . . . . . . . . . . . . . . .72
DiSEqC system . . . . . . . . . . . . . . . . . . . . .59
Display configuration . . . . . . . . . . . . . . . . .34
DVD player, connecting . . . . . . . . . . . . . . .47
EPG (NexTView) . . . . . . . . . . . . . . . . . . . .52
EPG activating . . . . . . . . . . . . . . . . . . . . . .53
EURO sockets . . . . . . . . . . . . . . . . . . . . . .49
External devices (playback) . . . . . . . . . . . . .49
External devices, connecting . . . . . . . . . . . .47
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . .20
Font, double size . . . . . . . . . . . . . . . . . . . .45
Forced mono . . . . . . . . . . . . . . . . . . . . . . .73
Freeze frame . . . . . . . . . . . . . . . . . . . . . . .5
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .71
Funktion keys . . . . . . . . . . . . . . . . . . . . . .40
Headphones . . . . . . . . . . . . . . . . . . . . . . .71
Help function . . . . . . . . . . . . . . . . . . . . . . .70
HiFi output . . . . . . . . . . . . . . . . . . . . . . . .30
77
Index
Initial programme position . . . . . . . . . . . . .66
Language for TV menu . . . . . . . . . . . . . . . .17
Large font . . . . . . . . . . . . . . . . . . . . . . . . .45
LNB frequencies . . . . . . . . . . . . . . . . . . . . .61
LNB supply voltage . . . . . . . . . . . . . . . . . .58
Low band . . . . . . . . . . . . . . . . . . . . . . . . .61
Marks in Teletext . . . . . . . . . . . . . . . . . . . .45
Marks, index . . . . . . . . . . . . . . . . . . . . . . .46
Marks, setting and deleting . . . . . . . . . .45,46
Menu language . . . . . . . . . . . . . . . . . . . . .17
Menus, menu control . . . . . . . . . . . . . . . . .13
Multiple pages, sub-pages . . . . . . . . . . . . .44
Mute function . . . . . . . . . . . . . . . . . . . . . .31
NexTView . . . . . . . . . . . . . . . . . . . . . . . . .52
NexTView activating . . . . . . . . . . . . . . . . .53
NexTView data collecting . . . . . . . . . . . . . .54
NexTView using . . . . . . . . . . . . . . . . . . . .55
NexTView, recording a programm . . . . . . . .57
Noise reduction . . . . . . . . . . . . . . . . . . . . .72
Numeric page selection . . . . . . . . . . . . . . .44
Operating scope . . . . . . . . . . . . . . . . . . . .15
Panorama . . . . . . . . . . . . . . . . . . . . . . . .43
Peripheral devices (see external devices) . . . .47
Picture format . . . . . . . . . . . . . . . . . . . . . .43
Picture in Picture (PIP) . . . . . . . . . . . . . . . . .41
Picture quality for video recorder . . . . . . . . .50
Picture settings . . . . . . . . . . . . . . . . .14,24,25
Picture sharpness . . . . . . . . . . . . . . . . .24,25
Programming Sat stations . . . . . . . . . . . .62,63
Recording Sat programmes . . . . . . . . . .64,65
Recording a programme with NexTView . . . .57
Reminder . . . . . . . . . . . . . . . . . . . . . . . . .37
Playing back from external devices . . . . .49,50
Riddle solution key . . . . . . . . . . . . . . . . . . .45
Sat programmes, recording . . . . . . . . . .64,65
Sat stations, programming . . . . . . . . . . .62,63
Sat system . . . . . . . . . . . . . . . . . . . . . . . .58
Scrolling by marks . . . . . . . . . . . . . . . . . . .46
Setting window . . . . . . . . . . . . . . . . . . . . .13
Signal type (EURO sockets) . . . . . . . . . . . . .49
Sleep timer . . . . . . . . . . . . . . . . . . . . . . . .38
Sound 1, sound 2 . . . . . . . . . . . . . . . . . . .14
Sound effects (see base width or spatial sound) . .71
Sound settings . . . . . . . . . . . . . . . . . . .27,28
78
Index
Spatial sound . . . . . . . . . . . . . . . . . . . . . .72
Standard picture settings . . . . . . . . . . . . . . .24
Standard sound values . . . . . . . . . . . . . . . .26
Standard time . . . . . . . . . . . . . . . . . . . . . .40
Standard values . . . . . . . . . . . . . . . . . .24,26
Station logos . . . . . . . . . . . . . . . . . . . . . . .21
Station search . . . . . . . . . . . . . . . . . . . .18,19
Station search, automatic . . . . . . . . . . . . . .18
Stations, deleting . . . . . . . . . . . . . . . . . . . .22
Stations, selecting . . . . . . . . . . . . . . . . . . .19
Stations, shifting . . . . . . . . . . . . . . . . . . . .22
Stations: shifting, copying and deleting . . . . .22
Stereo wide . . . . . . . . . . . . . . . . . . . . . . . .71
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .46
Summer time . . . . . . . . . . . . . . . . . . . . . . .40
Switching voltage, devices with . . . . . . . . . .49
Switching voltage, devices without . . . . . . . .50
Switch-off time . . . . . . . . . . . . . . . . . . . . .38
Switch-on time . . . . . . . . . . . . . . . . . . . . . .38
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Teletext, font size . . . . . . . . . . . . . . . . . . . .45
Thunderstorm . . . . . . . . . . . . . . . . . . . . . . .5
Timer control . . . . . . . . . . . . . . . . . . . . . . .38
Timer menu . . . . . . . . . . . . . . . . . . . . . . . .65
Timer recording . . . . . . . . . . . . . . . . . . . . .65
Toneburst . . . . . . . . . . . . . . . . . . . . . . . . .50
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . .13
Two-stage muting . . . . . . . . . . . . . . . . . . . .31
Variable zoom . . . . . . . . . . . . . . . . . . . . .43
VCR function . . . . . . . . . . . . . . . . . . . . . . .50
Video level . . . . . . . . . . . . . . . . . . . . . . . .72
Video recorder programme position,
automatic selection . . . . . . . . . . . . . . . . . . .48
Video recorder, connecting . . . . . . . . . . .47,48
Videocassettes, playing back . . . . . . . . .49,50
Volume correction . . . . . . . . . . . . . . . . . . .28
Volume reduction function . . . . . . . . . . . . . .31
Winter time . . . . . . . . . . . . . . . . . . . . . . . .39
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Zoomautomatic . . . . . . . . . . . . . . . . . . . . .34
79
Codetabel
BLACK PANTHER
BLAUPUNKT
616
491
508
607
614
BONDSTEC
466
BONDSTECBRANDT
505
BRANDT ELECTRONIQUE 503
574
BRAUN
570
BRIONVEGA
450
BROKSONIC
481
BRUNS
466
BUSH
588
Codes Video
Metz VG61
532
VF21, VF44, VF46
VF61, VE21, VE43
VE44, VE45, VD21
VD43, VD44, VD45
VC21, VC43, VC44
VC62, 21VB11
42VB12, 21VA12
21VA13, 42VA11
64VA14, 9836,9837
9847, 9874, 9875
9876, 9877
Metz VF22, VF47
CALIN
568
VF48, 9843, 9844
9849
Metz VH22, VH47
573
VH48
ACTION
ADMIRAL
ADVANTZ
ADVENTURA
ADYSON
AGHA
AIWA
AKAI
AKIBA
AKURA
ALBA
ALLORGAN
ALLSTAR
AMWAY
ANITECH
ART TECH
ASA
ASBERG
ASTRA
ASUKA
ASUKA
ASWO
AUDIO DYNAMICS
AUDIOSONIC
AUDIOTON
AUDIOVOX
AVIS
BAIRD
BANG & OLUFSEN
BASIC LINE
BAUR
BEAUMARK
BELL & HOWELL
BESTAR
80
468
481
481
468
487
547
481
477
481
505
575
487
487
466
547
529
529
487
575
478
575
481
481
527
528
505
575
466
481
487
505
503
487
513
607
547
468
466
481
487
547
481
547
505
562
572
482
508
609
483
546
612
484
554
505
588
593
490
529
481
528
CALIX
CANDLE
CARRERA
CARVER
CGE
CIE
CIMLINE
CLARIVOX
CLASSIC
CLATRONIC
COLORTYME
COLT
CONDOR
CONTINENTAL EDISON
CRAIG
CROSLEY
CROWN
CROWN
CRYSTAL
CTC
CURTIS MATHES
CYBEREX
DAEWOO
DANSAI
DAWA
DAYTRON
DE GRAAF
DECCA
DECCAVIDEO
DENON
DIGITAL
DORIC
DTS
DUAL
547
487
616
DUEL
DUMONT
DYNATECH
547
ECONOMIC
583
547
609
616
565
612
599
EDISON
ELBE
ELCATECH
ELECTROHOME
ELECTROPHONIC
ELIN
ELTA
EMERSON
481
481
481
547
527
505
487
487
606
481
466
547
487
466
503
481
481
487
490
575
466
505
547
466
487
575
466
529
528
528
527
477
601
547
503
530
505
468
487
510
487
616
487
481
481
547
487
481
496
527
609
621
487
502
530
610
507
532
612
504
505
524
575
487
590
490
593
481
487
547
616
504
487
507
505
547
527
547
575
616
547
468
553
481
505
504
505
527
481
487
527
547
616
616
Codetabel
EPC
ESC
ETZUKO
EUROPHON
EXPERT
505
466
487
586
604
586
510
FERGUSON
501
555
487
468
477
468
481
505
574
523
595
524
596
477
481
473
487
478
487
528
575
601
603
FIDELITY
FINLUX
FIRST LINE
FISHER
FUNAI
GAB
GBC
GE
GEC
GELOSO
GITEM
GOLDHAND
GOLDSTAR
GOODMANS
GRAETZ
GRANADA
GRANDIN
GRUNDIG
GRUNDIG
GUTTRONIC
HANSEATIC
HANTAREX
HARLEY DAVIDSON
HARVARD
HCM
HEADQUARTER
HINARI
HINARIHITACHI
HITACHI
HYPSON
IMPERIAL
INGERSOL
INNO HIT
INNO HIT
INTERBUY
INTERDISCOUNT
INTERFUNK
INTERVIDEO
INTERVISION
IRRADIO
ITT
ITV
487
466
547
528
466
575
487
468
556
466
617
468
468
542
601
481
451
457
461
491
496
530
585
610
602
481
575
481
481
466
468
487
475
481
530
604
487
510
509
510
616
481
575
468
600
466
487
481
450
466
598
616
JENSEN
JETPOINT
JVC
JVC_LCD
571
604
KAISER
KAISUI
KAPSCH
KARCHER
KENDO
KENWOOD
KLH
KLIT
KODAK
KORPEL
KUBA
LEYCO
490
481
575
487
621
505
474
557
605
487
452
458
462
492
497
531
600
611
547
610
530
600
477
565
606
604
453
459
463
493
507
563
606
612
552
616
603
532
575
616
454
460
464
495
527
584
609
613
575
487
487
490
509
476
485
535
477
503
601
478
505
603
LG
LIESENKOTTER
LLOYD
LLOYD’S
LOEWE
LOEWE OPTA
LOGIK
LUXOR
LXI
MAGNADYNE
M ELECTRONICS
MAGNASONIC
MAGNAVOX
MAGNIN
MAGNUM
MANESTH
MARANTZ
MARQUANT
MARTA
MATRIX
MATSUI
MATSUSHITA
MEDIATOR
MEMOREX
MEMPHIS
MGA
MGN
MINERVA
MINOLTA
MITSUBISHI
575
547
575
MULTITECH
MURPHY
487
527
601
565
603
575
604
487
468
481
575
483
606
505
NAD
NATIONAL
NEC
NECKERMANN
505
575
503
520
515
575
487
600
575
483
468
481
487
481
487
473
487
578
575
481
601
481
481
487
468
518
468
575
547
470
481
481
581
487
491
487
481
481
486
562
527
527
468
487
547
547
606
477
477
542
487
481
466
601
547
507
504
450
491
509
519
504
545
521
505
601
603
519
505
487
504
565
487
606
491
491
509
478
601
477
505
510
547
575
527
547
483
517
481
481
507
547
582
487
527
547
547
528
490
565
566
509
586
560
601
561
610
481
547
609
610
612
505
609
547
519
612
468
527
481
487
575
505
469
493
510
528
576
470
496
512
541
477
505
513
565
477
81
Codetabel
NEI
NESCO
NIKKAI
NIKKO
NOBLIKO
NOKIA
NOVATRONIC
OCEANIC
OKANO
OLYMPIC
OLYMPUS
ORION
OTTO VERSAND
PAEL
PALLADIUM
PANASONIC
PATHE MARCONI
PAXSONIX
PENNEY
PENTAX
PERSHIN
PHILCO
PHILIPS
PHILIPS
PHILIPS
PHILIPS
PHILIPS
PHILIPS (F)
PHONOLA
PILOT
PIONEER
PRIMA
PROFEX
PROFILE
PROSCAN
PROTEC
PULSAR
PULSER
PYE
QTY1
QUARTER
QUARTZ
QUASAR
QUELLE
82
575
575
487
466
481
606
450
488
505
518
554
601
500
515
602
575
483
487
466
507
481
537
560
527
508
544
609
616
606
481
507
533
623
503
547
477
477
606
481
481
529
550
568
624
491
527
481
477
505
487
547
477
487
481
468
565
592
468
481
507
450
470
610
611
616
QUELLE
468
489
510
547
557
603
503
521
470
503
516
551
567
604
504
524
483
504
517
553
600
QUESTAR
489
601
604
509
538
561
474
512
565
610
620
531
558
589
493
513
575
611
621
536
559
591
496
541
599
612
487
508
549
491
527
600
505
532
601
505
574
505
481
507
491
530
563
575
625
565
527
527
507
547
564
620
547
528
548
565
621
RADIOLA
RADIONETTE
RADIX
RANDEX
RANDIU
RANK/BUSH/MURPHY
RCA
REALISTIC
REDIFFUSION
REX
RICOH
ROADSTAR
ROYAL
SABA
SABA
SABA
SAISHO
SALORA
SALORA
SAMBERS
SAMEX
SAMSUNG
SANKY
SANSUI
SANWA
SANYO
SBR
SCHAUB LORENZ
SCHNEIDER
575
527
547
490
539
481
483
547
481
575
547
547
527
459
471
547
RADIALVA
575
529
461
474
547
464
477
SCOTT
SEARS
SEG
SEI-SINUDYNE
SELECO
SENTRA
SETRON
SHARP
SHINTOM
SHIVAKI
SHOGUN
SHORAI
SICE
SIEMENS
478
496
505
512
529
599
610
616
466
484
497
508
513
541
604
611
621
487
503
509
519
565
606
612
481
527
601
497
481
481
601
477
468
601
503
481
481
466
487
575
604
527
481
481
483
547
547
487
487
547
617
503
521
601
509
468
517
504
524
603
575
470
505
540
483
547
575
575
505
575
469
577
470
586
471
468
478
527
564
575
604
483
481
529
569
578
505
487
530
571
581
477
490
528
504
481
510
547
505
545
462
470
481
493
464
472
486
494
499
515
574
486
467
516
606
547
510
597
487
487
509
468
551
527
450
477
510
563
573
582
481
468
487
509
503
466
466
468
487
481
547
509
609
459
468
479
491
491
504
510
528
575
609
614
505
487
544
575
612
461
469
480
492
Codetabel
SILMA
SILVA
SINGER
SINUDYNE
SOLAVOX
SONOKO
SONOLOR
SONTEC
SONY
SR1000
STS
SUNWOOD
SYLVANIA
SYMPHONIC
TAISHO
TALENT
TANDBERG
TANDY
TASHIKO
TATUNG
TEAC
TEC
TECHLINE
TECHNICS
TECHNILAND
TECHNISAT
TEKNANT
TEKNIKA
TELEAVIA
TELEAVIA
TELEFUNKEN
TELEORDER
TELERENT
TELESERVICE
TELETECH
TENOSAL
TENSAI
THOMAS
THOMSON
THORN
THORN-FERGUSON
TOKAI
TOSHIBA
TOTEVISION
TOWADA
TOWIKA
495
511
607
612
575
481
487
509
599
466
575
601
481
506
541
547
477
487
527
481
509
609
623
468
528
505
505
466
487
527
575
563
575
481
503
505
500
515
579
547
505
609
487
487
481
575
547
499
505
60
474
505
586
612
501
575
609
481
474
547
481
487
487
496
525
609
614
497
530
610
547
513
575
527
498
584
611
616
575
604
512
599
487
513
623
514
TRIAD
TRIX
TVA
575
481
466
UHER
466
505
450
565
606
547
560
481
530
606
604
ULTRAVOX
UMA
UMA
UNITECH
UNITED
UNIVERSUM
UNIVOX
VICTOR
505
466
554
547
481
481
VIDEOMASTER
VIDEOPLUS
VIDEOSONIC
VIEWMARK
VIEWMAX
527
487
593
490
509
500
524
6226
482
542
604
503
574
504
594
501
565
606
503
575
609
503
601
612
487
481
504
604
505
606
505
527
547
490
483
547
609
491
571
612
527
575
621
545
547
487
547
YOKAN
YOKO
487
487
466
510
481
547
ZENITH
481
XR1000
YAMISHI
612
604
614
487
532
505
574
601
612
477
575
481
450
575
528
575
529
527
504
524
503
589
WEGAVOX
WELTBLICK
WHITE WESTINGHOUSE
WINSTON
WIZJA
WORLDVIEW
503
521
594
481
543
562
WARDS
612
477
510
616
575
609
565
487
490
Codes DVD-Player
METZ
AKAI
CYBER HOME
DENON
GRUNDIG
HARMAN/KARDON
HITACHI
JVC
KENWOOD
LABWAVE
LINN
LOEWE
MARANTZ
MEDION
NAD
NONAME
ONKYO
PANASONIC
PHILIPS
PHILIPS
PIONEER
SAMSUNG
SEG
204
214
223
216
222
206
205
212
208
200
215
219
218
221
207
228
209
216
219
234
203
210
201
239
230
232
238
210
231
201
219
236
225
226
220
235
204
227
236
233
237
83
Codetabel
SHERWOOD
SONY
TECHNICS
THOMSON
TOSHIBA
YAMAHA
224
211
216
213
202
216
229
217
Codes HIFI - CD
AIWA
AKAI
AKKAI
AMSTARD
AMSTRAD
ARCAM
ASWO
815
856
856
957
929
908
909
BANG & OLUFSEN
BRAUN
BUSH
808
975
888
CAMBRIDGE
945
945
908
DAEWOO
DIORA
DUAL
876
801
853
961
949
822
FISCHER
830
GOLDSTAR
885
872
888
908
CAMBRIDGE AUDIO
CARVER
DENON
GOODMANNS
GOODMANS
GRUNDIG
816
857
817
872
884
921
940
942
956
812
899
962
845
900
846
901
832
859
994
831
920
953
911
912
913
931
934
935
INTERSOUND
960
937
JVC
844
903
848
904
849
992
902
KENWOOD
847
878
963
858
879
859
925
KRELL
820
877
948
908
LINN
LUXMAN
908
924
964
946
METZ HE11
882
833
908
955
908
908
908
MARANTZ
MATSUI
MEDION
MERIDIAN
MAGNAVOX
MICROMEGA
84
NAD
NAIM
NAKAMICHI
NOKIA
NONAME
NSM
947
908
930
938
888
802
806
803
807
OKANO
869
819
PALLADIUM
PANASONIC
PHILIPS
PMG
PROTON
810
834
833
965
824
862
923
906
908
QUAD
908
965
RADIOTONE
958
911
829
910
818
908
ONKYO
PIONEER
905
853
ITT
972
908
955
976
HARMAN KARDON
HITACHI
MINOWA
MISSION
MTC
967
RADMOR
REVOX
REVOX/STUDER
ROTEL
909
804
805
871
827
861
881
851
915
908
866
918
909
870
911
825
863
826
864
850
922
951
966
968
860
840
870
892
929
972
979
983
987
919
841
873
911
955
973
980
984
988
868
885
927
959
977
981
985
989
SABA
SAE
SAMSUNG
SANSUI
SANYO
SCHNEIDER
926
908
939
908
852
821
869
888
928
960
978
982
986
SHARP
SHERWOOD
SIEMENS
800
943
867
873
880
887
969
813
944
868
874
883
889
970
869
875
885
890
971
843
897
991
945
893
898
895
932
SUPERTECH
SYLVANIA
799
936
833
872
876
886
891
892
892
842
896
990
888
908
T+A
882
974
SINOTEC
SINOTEC (PEPSI-DOSE)
SONY
908
847
Codetabel
T+A ELECTROAKUSTIK 882
TECHNICS
809
950
TENSAI
954
THOMSON
823
UHER
814
869
966
995
UNIVERSUM
UNKNOWN
YAMAHA
828
941
916
993
917
918
AMSTRAD
ASWO
842
963
845
934
916
976
BANG & OLUFSEN
BRAUN
BUSH
836
870
835
DAEWOO
DENON
907
834
891
972
899
837
936
AKAI
DIORA
DUAL
908
952
854
855
933
901
982
980
855
941
999
912
942
885
886
896
937
867
873
919
986
868
874
947
869
878
964
864
908
923
993
909
910
880
947
953
964
865
967
992
881
950
954
976
925
968
882
951
955
946
952
956
965
969
966
991
T+A
T+A ELEKTROAKUSTIK
TECHNICS
THOMSON
871
961
838
852
961
898
981
983
UNIVERSUM
868
947
875
950
886
895
YAMAHA
857
924
858
932
859
914
377
737
455
745
993
464
468
739
372
471
423
991
944
928
921
853
938
943
PANASONIC
PHILIPS
PIONEER
RADMOR
978
860
977
SAMSUNG
883
897
985
930
866
872
918
976
839
890
911
REVOX
REVOX/STUDER
843
844
962
849
945
913
951
933
987
SANY
SANYO
SCHNEIDER
SHARP
SHERWOOD
840
892
841
970
879
971
900
850
851
935
894
985
998
893
GOLDSTAR
964
833
867
976
979
HARMAN KARDON
HITACHI
926
915
984
931
ITT
918
919
JVC
862
994
863
995
974
996
975
997
KENWOOD
848
957
917
958
935
990
936
993
LINN
LUXMAN
888
876
889
877
884
989
METZ HE11
MARANTZ
961
887
922
999
NAD
NAKAMICHI
NOKIA
903
927
920
904
905
980
906
949
847
856
PALLADIUM
872
979
FISCHER
GOODMANNS
GOODMANS
GRUNDIG
948
846
902
959
ONKYO
ONKYO
Codes HIFI - Tape
AIWA
OKANO
SIEMENS
SONY
960
929
976
854
939
988
861
Codes HIFI - Tuner
AIWA
AKAI
AMSTRAD
ASH
ASWO
376
734
452
469
744
427
BANG & OLUFSEN
BUSH
369
748
DAEWOO
458
371
445
461
DENON
DIORA
424
85
Codetabel
DUAL
370
381
FISCHER
434
449
GOLDSTAR
GOODMANNS
GOODMANS
GRUNDIG
746
737
748
427
429
HARMAN KARDON
HITACHI
418
453
730
991
ITT
412
JVC
414
448
425
KENWOOD
417
741
439
994
LINN
LUXMAN
472
438
474
METZ HE11
743
450
409
426
MARANTZ
MINOWA
MISSION
NOKIA
NAD
NAKAMICHI
NONAME
736
440
PALLADIUM
731
371
427
383
996
735
432
450
384
997
386
427
428
378
SAMSUNG
411
475
433
374
391
395
399
403
409
443
733
749
373
413
426
479
REVOX/STUDER
RADMOR
ROTEL
SANYO
SCHNEIDER
SHARP
SHERWOOD
SIEMENS
86
450
444
447
446
740
738
739
746
416
420
421
405
743
387
406
382
430
431
462
UHER
375
403
737
467
473
733
YAMAHA
385
992
415
435
454
986
766
829
831
789
988
790
791
981
995
743
Codes HIFI - Amp
410
459
419
748
REVOX
T+A
T+A ELEKTROAKUSTIK
TECHNICS
TENSAI
THOMSON
SINOTEC
SINOTEC (PEPSI-DOSE)
SONY
AIWA
AKAI
AMSTRAD
733
379
PANASONIC
PHILIPS
PIONEER
SUPERTECH
737
747
749
749
389
422
466
UNIVERSUM
OKANO
ONKYO
994
460
742
451
436
998
437
999
463
476
990
380
392
396
400
404
412
469
735
465
473
995
388
393
397
401
407
441
470
746
390
394
398
402
408
442
732
748
446
456
427
480
457
477
732
478
733
ASH
ASWO
777
753
785
840
776
793
BANG & OLUFSEN
BRAUN
BUSH
996
960
748
DAEWOO
DENON
DIORA
DUAL
770
751
817
835
952
FISCHER
750
820
839
GRUNDIG
GOODMANNS
GOLDSTAR
794
749
779
795
766
804
782
HARMAN KARDON
760
751
823
HITACHI
ITT
827
JBL
JVC
821
792
975
816
819
KENWOOD
755
771
818
LINN
LUXMAN
794
810
795
845
954
METZ HE11
774
794
785
795
795
798
MARANTZ
MEDION
MERIDIAN
985
754
813
782
955
Codetabel
MINOWA
MISSION
978
799
NOKIA
NAD
NAKAMICHI
NIAM
NONAME
826
834
822
795
782
OKANO
763
772
765
982
PALLADIUM
783
991
PIONEER
PRO-LOGIC
761
764
805
793
797
757
957
808
794
798
758
994
795
803
795
QUAD
795
RADIOTONE
841
801
843
796
983
802
977
797
984
803
837
756
764
783
794
815
951
962
966
970
978
990
832
763
769
780
794
950
844
846
768
784
812
827
953
963
967
971
779
785
813
840
956
964
968
972
833
766
770
781
800
767
775
784
947
974
991
806
836
976
766
838
844
ONKYO
PALLADIUM/OKANO
PANASONIC
PHILIPS
RADMOR
REVOX
REVOX/STUDER
ROTEL
SABA
SAMSUNG
SANYO
SCHNEIDER
SHARP
SHERWOOD
SIEMENS
SINOTEC
SINOTEC (PEPSI-DOSE)
SONY
SUPERTECH
811
828
750
763
782
786
814
842
961
965
969
973
818
825
762
768
779
785
948
786
786
787
782
T+A
774
T+A ELEKTROAKUSTIK 774
TECHNICS
805
993
TENSAI
958
THOMSON
980
UHER
UNIVERSUM
987
763
963
YAMAHA
788
752
809
979
824
830
796
992
798
959
87
Service Centre
Training Centre
Administration and development
Storage/Dispatch
Mecablitz production
TV production
! Plastics technology
!
Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg
Core competence in the areas of electronics and plastics
technology to form the basis of the excellent reputation of the
Metz Werke that has been built up throughout the world over
a period of many decades.
Metz offers quality made in Germany:
Consumer electronics, mecablitz flash units,
plastics technology and industrial electronics.
Metz-Werke GmbH & Co. KG
Postfach 1267, D-90506 Zirndorf
Fon: +49 911 - 97060
Fax: +49 911 - 9706340
www.metz.de
[email protected]
Errors excepted. Subject to changes.
ķ
Printed in Germany
Metz - allways first class.