Poulan 530088051 Cultivator User Manual

Add to my manuals
7 Pages

advertisement

Poulan 530088051 Cultivator User Manual | Manualzz
ENGLISH
R
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
PP2000T
ESPAÑOL
Electrolux Home Products, Inc.
250 Bobby Jones Expressway
Augusta, GA 30907
Copyright E2002 Electrolux Home Products, Inc.
530088051
5/1/02
FRANÇAIS
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en lesiones graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertissements et toutes les instructions de sécurité. Tout défaut de le
faire pourrait entraîner des blessures graves.
SAFETY RULES
Always wear safety
S Dress properly.
glasses or similar eye protection when operating, or performing maintenance on your
unit (safety glasses are available). Eye
protection should be marked Z87.
S Always wear face or dust mask if operation
is dusty.
S Always wear heavy, long pants, long
sleeves, boots, and gloves.
S Always wear foot protection. Do not go
barefoot or wear sandals.
.
SeS Secure hair above shoulder length
cure or remove loose clothing or clothing
with loosely hanging ties, straps, tassels,
etc. They can be caught in moving parts.
S Being fully covered also helps protect you
from debris and pieces of toxic plants
thrown by spinning tines.
S Stay alert. Do not operate when you are
tired, ill, upset, or under the influence of alcohol, drugs, or medication. Watch what
you are doing; use common sense.
S Wear hearing protection.
S Never start or run inside a closed room or
building. Breathing exhaust fumes can kill.
S Keep handles free of oil and fuel.
S Never operate the cultivator without the tine
cover in place and properly secured.
WARNING: When using gardening
appliances, basic safety precautions must always be followed to reduce the risk of fire and
serious injury. Read and follow all instructions. Failure to so so can result in serious injury.
This power unit can be dangerous! This unit
can cause serious injury including amputation or blindness to the operator and others.
Operator is responsible for following instructions and warnings on unit and in manual.
Read entire instruction manual before using
unit! Be thoroughly familiar with the controls
and the proper use of the unit. Restrict the
use of this unit to persons who have read, understand and will follow the instructions and
warnings on the unit and in the manual. Never
allow children to operate this unit.
INSTRUCTION
MANUAL
SAFETY INFORMATION
ON THE UNIT
OPERATOR SAFETY
DANGER: RISK OF CUT. KEEP
HANDS AND FEET AWAY FROM TINES
AND CUTTING AREA. Rotating tines can
cause serious injury. Do not attempt to clear
away cut material or hold material to be cut
when the engine/motor is running. Make sure
powerhead is stopped and spark plug wire is
disconnected (or powerhead is disconnected
from power source) when removing jammed
material from the tines. Do not grab or hold attachment by the tines.
FUEL SAFETY (for gas powerheads)
S
S
S
S
S
S
S
S
S
Mix and pour fuel outdoors.
Keep away from sparks or flames.
Use a container approved for fuel.
Do not smoke or allow smoking near fuel or
the powerhead.
Avoid spilling fuel or oil. Wipe up all fuel
spills before starting the powerhead.
Move at least 10 feet (3 meters) away from
fueling site before starting powerhead engine.
Stop engine and allow to cool before removing fuel cap.
Remove fuel cap slowly.
Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames
from water heaters, electric motors or
switches, furnaces, etc.
ELECTRICAL SAFETY (for electric
powerheads)
WARNING: Keep away from rotating
tines. You and others can be blinded/injured.
Wear eye and leg protection.
WARNING: Avoid a dangerous environment. To reduce the risk of electrical
shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs,
etc. Do not expose to snow, rain, or water to
avoid the possibility of electrical shock. Do
not handle extension cord plug or unit with wet
hands.
S Use only a voltage supply as shown on the
nameplate of the unit.
S Avoid dangerous situations. Do not use in
presence of flammable liquids or gases to
avoid creating a fire or explosion and/or
causing damage to unit.
Hazard Zone
30 ft.
(10 m)
Keep children, bystanders, and animals 30 feet
(10 meters) away. Stop unit immediately if approached.
2
DOUBLE INSULATION
CONSTRUCTION
S Avoid dangerous environments. Do not
use in unventilated areas or where dust or
explosive vapors can build up.
S To reduce the risk of electrical shock, use
extension cords specifically marked as
suitable for outdoor appliances. The electrical rating of the cord must not be less than
the rating of the unit. The cord must be
marked with the suffix “W-A” (in Canada,
“W”). Make sure your extension cord is in
good condition. Inspect extension cord before use and replace if damaged. An undersized extension cord will cause a drop in
line voltage resulting in loss of power and
overheating. If in doubt, use the next heavier gauge. The smaller the gauge number,
the heavier the cord.
S Do not use multiple cords.
S The powerhead may have a polarized plug
(one blade is wider than the other); if so, it
will require the use of a polarized extension
cord. The appliance plug will fit into a polarized extension cord only one way. If the
plug does not fit fully into the extension
cord, reverse the plug. If the plug still does
not fit, obtain a correct polarized extension
cord. A polarized extension cord will require the use of a polarized wall outlet. This
plug will fit into the polarized wall outlet only
one way. If plug does not fit fully into the wall
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper wall outlet. Do not change the equipment plug, extension cord receptacle, or
extension cord plug in any way.
S Do not attempt to repair unit. Inspect the insulation and connectors on the powerhead
and extension cord before each use. If
there is any damage, do not use until damage is repaired by your authorized service
center.
S Do not pull or carry by cord; do not use cord
as a handle, close a door on cord, or pull
cord around sharp edges or corners. Keep
cord away from heated surfaces. Do not
unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
S Do not use the powerhead if the switch
does not turn the unit on and off properly.
Have the unit repaired by your authorized
service center.
S Keep the extension cord clear of operator
and obstacles at all times. Do not expose
cords to heat, oil, water, or sharp edges.
S Avoid any body contact with any grounded
conductor, such as metal fences, or pipes,
to avoid the possibility of electric shock.
Don’t handle plug or unit with wet hands.
S Do not use with damaged cord or plug. If
powerhead is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, return it to your authorized service center for repair.
S Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the circuit
or outlet to be used for the powerhead. Receptacles are available having built-in
GFCI protection and may be used for this
measure of safety.
Your powerhead should be double insulated to
help protect against electric shock. Double insulation construction consists of two separate
“layers” of electrical insulation instead of
grounding. Tools and appliances built with a
double insulation system are not intended to be
grounded. Safety precautions must be observed when operating any electrical tool. The
double insulation system only provides added
protection against injury resulting from an internal electrical insulation failure.
WARNING: All repairs to an electric
powerhead, including housing, switch, motor,
etc., must be diagnosed and repaired by qualified service personnel. Replacement parts for a
double insulated appliance must be identical to
the parts they replace. A double insulated
appliance is marked with the words “double insulation” or “double insulated”. The symbol
(square within a square) may also be marked on
the appliance. Failure to have the unit repaired
by your authorized service dealer can cause the
double insulation construction to become ineffective and result in serious injury.
UNIT/MAINTENANCE SAFETY
WARNING: Disconnect powerhead
spark plug (or disconnect powerhead from
power source) before performing maintenance.
S Inspect entire unit before each use. Replace damaged parts. Check for fuel leaks.
Make sure all fasteners are in place and securely fastened.
S Maintain unit according to recommended
procedures.
S Have all maintenance and service not explained in this manual performed by an authorized service center.
S Throw away tines that are bent, warped,
cracked, broken, or damaged in any other
way. Replace parts that are cracked,
chipped, or damaged before using the unit.
S Use only recommended Poulan PRO!
parts and accessories. Never use wire,
wire rope, string, flailing devices, etc.
S Be sure tines stop turning when engine
idles (see CARBURETOR ADJUSTMENTS section of powerhead manual).
S Remove the tines before making carburetor
adjustments. Hold the unit by hand.
S Keep others away when making carburetor
adjustments.
S Never start the unit with the clutch housing
removed. The clutch can fly off and cause
serious injury.
S Avoid heavy contact with solid objects that
might stop the tines. If heavy contact occurs, stop the unit and inspect for damage.
S If tines strike a foreign object, follow these
steps: stop unit and disconnect spark plug
wire (or disconnect from power source), inspect for damage, and repair any damage
before resuming operation of the unit.
3
S Never douse or squirt the attachment with
water or any other liquid. Clean unit and decals with a damp sponge (see STORAGE).
If situations occur which are not covered in
this manual, use care and good judgment. If
you need assistance, call 1-800-554-6723.
SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or
nerve damage in the fingers, hands, and
joints of people prone to circulation disorders
or abnormal swellings. Prolonged use in cold
weather has been linked to blood vessel damage in otherwise healthy people. If symptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool and seek medical attention. An anti-vibration system does
not guarantee the avoidance of these problems. Users who operate power tools on a
continual and regular basis must monitor
closely their physical condition and the condition of this unit.
CULTIVATING SAFETY
WARNING: Inspect the area to be cultivated before each use. Remove objects
(rocks, vines, branches, broken glass, nails,
wire, string, etc.) which can be thrown by the
tines or can wrap around the shaft.
S Hold the unit firmly with both hands.
S Keep firm footing and balance. Do not overreach or stand on unstable surfaces.
S Look behind and use care when backing
up.
S Keep all parts of your body away from the
tines and muffler.
S Do not force the unit. Use only for jobs explained in this manual. Use only for cultivating. Do not abuse unit. Do not use in rain or
wet locations.
S Use only in daylight or good artificial light.
SAVE THESE INSTRUCTIONS
TRANSPORTING AND STORAGE
S Stop powerhead before leaving work area.
S Allow powerhead and gearbox to cool before storing or transporting it in a vehicle.
S Store unit and fuel in area where fuel vapors
cannot reach sparks or open flames from
water heaters, electric motors or switches,
furnaces, etc.
S Store attachment so tines cannot accidentally cause injury.
S Store attachment indoors, out of reach of
children.
ASSEMBLY
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance or find parts
missing or damaged, call 1-800-554-6723.
ASSEMBLY
Your attachment is fully assembled; no assembly is necessary.
OPERATION
KNOW YOUR CULTIVATOR ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CULTIVATOR ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself
with the location of the various controls and adjustments. Save this manual for future reference.
Hanger
Tube
Tine Cover
Cutting Tines
CUTTING TINES
The CUTTING TINES are designed to loosen
soil.
TINE COVER
4
The TINE COVER provides partial protection
from the rotating tines.
OPERATING THE COUPLER
INSTALLING ATTACHMENT
HANGER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Edger . . . . . . . . . . . . . . . . . . . . . . .PP1000E
Blower . . . . . . . . . . . . . . . . . . . . . .PP3000B
Brushcutter . . . . . . . . . . . . . . . . . PP4000C
An attachment hanger is provided for storage
when attachment is not in use.
To install hanger on attachment:
1. Remove the tube cap from the attachment
(if present) and discard.
2. Press and hold the locking/release button.
3. Push hanger onto the attachment until the
locking/release button snaps into the hole.
WARNING: Always disconnect powerhead spark plug (or disconnect powerhead
from power source) before removing or installing attachments.
OPERATING POSITION
ALWAYS WEAR:
REMOVING ATTACHMENT
Eye Protection
CAUTION: When removing or installing attachments, place the powerhead and attachment on a flat surface for stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Long Pants
Upper Tube
Heavy Shoes
Coupler
LOOSEN
Lower
Attachment
WARNING: To avoid personal injury,
never carry the cultivator while the unit is running.
TIGHTEN
Knob
WARNING: The gearbox gets very
hot after extended periods of use. To avoid
burns, do not touch the gearbox until it has
been allowed to cool.
2. Press and hold the locking/release button.
Locking/Release
Button
Coupler
Lower Attachment
CULTIVATING
1. Move the cultivator to the work area prior to
starting the engine/motor.
2. With the engine/motor running and the
tines off the ground, press the throttle trigger to increase the engine speed.
3. Hold trigger handle and assist handle firmly. Slowly lower the cultivator until the
tines make contact with the ground.
Upper Tube
3. While securely holding the upper tube, pull
the attachment straight out of the coupler.
INSTALLING ATTACHMENT
1. Remove the tube cap from the attachment
(if present) and discard.
2. Position locking/release button of attachment into guide recess of upper tube coupler.
Coupler Primary Hole
Guide Recess
Upper
Tube
Locking/
Release
Button
Attachment
3. Push the attachment into the coupler until
the locking/release button snaps into the
primary hole.
4. Before using the unit, tighten the knob securely by turning clockwise.
5
4. As unit begins cultivating, pull back on the
unit so that the tines can penetrate the
ground.
5. Once the ground has been broken, continue at a moderate pace until you are familiar
with the controls and the handling of the
cultivator.
6. Pull the cultivator backwards to improve
the depth of cultivation and reduce your effort.
7. To cultivate in confined areas or narrow
rows, remove the left and right outer tines
(see TINE REPLACEMENT).
MAINTENANCE
TINE MAINTENANCE
WARNING: Always stop unit and dis-
WARNING: The tines will continue to
spin after the engine stops or after the throttle
trigger has been released. To avoid serious
injury, make sure the tines have stopped
coasting and disconnect the spark plug (or
disconnect powerhead from power source)
before performing work on the tines.
connect spark plug wire (or disconnect powerhead from power source) before performing
maintenance.
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service center for replacement of damaged or worn parts.
S Tine Cover -- Discontinue use of cultivator if
tine cover is damaged.
WARNING: Always replace tines
that are bent, warped, cracked, broken, or
damaged in any other way. Never attempt to
straighten and reuse a damaged tine. Use
only specified replacement tines. Wear protective gloves when handling or performing
maintenance on the tines to help avoid injury.
CHECK FOR LOOSE
FASTENERS AND PARTS
S Clevis pins
S Hitch pin clips
INSPECT AND CLEAN UNIT AND
DECALS
S After each use, inspect complete unit for
loose or damaged parts. Clean the unit and
decals using a damp cloth with a mild detergent.
S Wipe off unit with a clean dry cloth.
SERVICE AND ADJUSTMENTS
TINE REPLACEMENT
WARNING: The tines will continue to
spin after the engine stops or after the throttle
trigger has been released. To avoid serious
injury, make sure the tines have stopped
coasting and disconnect the spark plug (or
disconnect powerhead from power source)
before performing work on the tines.
Clevis Pin
Hitch Pin Clip
WARNING: Wear protective gloves
when handling or performing maintenance on
the tines to avoid
injury. The tines become very sharp from use.
1. Remove the hitch pin clips and clevis pins.
2. Remove the tines and felt cushions from
the shaft.
3. Clean and oil the shaft.
4. Replace the tines and the felt cushions.
6
5. Repeat previous steps on opposite side.
6. Reinstall clevis pins and hitch pin clips.
NOTE: When installed correctly, the hubs
on the tines will face each other. The letters
“R” stamped on the tines will be on the right
side of the cultivator and the letters “L” will be
on the left side.
STORAGE
S Clean the entire attachment.
S Inspect the tine cover area and clean any
dirt or debris that has collected. Inspect the
tines; replace tines that are bent, warped,
cracked, broken or damaged in any other
way.
S Lightly oil external metal surfaces.
S Check entire attachment for loose screws
or nuts. Replace any damaged, worn or
broken parts.
S At the beginning of the next season, use
only fresh fuel having the proper gasoline to
oil ratio.
WARNING: Perform the following
steps after each use:
S Allow attachment and gearbox to cool before storing or transporting.
S Position attachment so that any sharp object cannot accidentally cause injury.
S Store the attachment in a dry, well ventilated area out of the reach of children.
SEASONAL STORAGE
Prepare attachment for storage at end of season or if it will not be used for 30 days or more.
If your cultivator attachment is to be stored for
a period of time:
LIMITED WARRANTY
ELECTROLUX HOME PRODUCTS, INC.,
warrants to the original purchaser that each
new Poulan PRO!
! brand gasoline tool or attachment is free from defects in material and
workmanship and agrees to repair or replace
under this warranty any defective gasoline
product or attachment as follows from the
original date of purchase.
2 YEARS-- Parts and Labor, when used for
household purposes.
90 DAYS -- Parts and Labor, when used for
commercial, professional, or income producing purposes.
30 DAYS -- Parts and Labor, if used for rental
purposes.
This warranty is not transferable and does not
cover damage or liability caused by improper
handling, improper maintenance, or the use
of accessories and/or attachments not specifically recommended by ELECTROLUX
HOME PRODUCTS, INC., for this tool. Additionally, this warranty does not cover tuneups, spark plugs, filters, cutting line, or rotating head parts that will wear and require
replacement with reasonable use during the
warranty period. This warranty does not cover predelivery setup or normal adjustments
explained in the instruction manual.
THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY HAVE
OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
NO CLAIMS FOR CONSEQUENTIAL OR
OTHER DAMAGES WILL BE ALLOWED,
AND THERE ARE NO OTHER EXPRESS
WARRANTIES EXCEPT THOSE EXPRESSLY STIPULATED HEREIN.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS OR EXCLUSION MAY NOT
APPLY TO YOU.
The policy of ELECTROLUX HOME PRODUCTS, INC., is to continuously improve its
products. Therefore, ELECTROLUX HOME
PRODUCTS, INC., reserves the right to
change, modify, or discontinue models, designs, specifications, and accessories of all
products at any time without notice or obligation to any purchaser.
7

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement