D-Link DSL-2544N Quick Installation Manual

Add to my manuals
8 Pages

advertisement

D-Link DSL-2544N Quick Installation Manual | Manualzz

Dual BanD Wireless n600 GiGaBit aDsl2+ MoDeM router

Dsl-2544n

QUICK

INSTALLATION

GUIDE

2

CONTENTS OF

PACKAGING

Contents

INSTALLATION CD

INCLUDES SET-UP WIZARD & TECHNICAL MANUALS

DUAL BAND WIRELESS N600 GIGABIT ADSL2+ MODEM ROUTER

DSL-2544N

POWER ADAPTER

ADAPTER

ETHERNET CABLE (CAT5 UTP)

CONNECT THE ROUTER TO YOUR PC DURING SET-UP

RJ-11 PHONE CABLE

ADSL SPLITTER

If any of these items are missing from your packaging contact your reseller

Dsl-2544n

PRODUCT

SETUP

CD setuP WiZarD

SET-UP WIZARD CD

The CD contains all of the instructions required to set-up DSL-2544N

INSERT CD

Insert the CD into the CD drive of your computer. The set-up wizard should start automatically. Make sure that your internet connection is active. (Do not plug in DSL-2544N yet)

SET-UP WIZARD

Select your language from the list of options and follow the steps within the wizard to complete the set-up of DSL-2544N

aDVanCeD set-uP (aCCess Via iP aDDress)

To configure DSL-2544N manually (without the set-up CD) connect your computer to the DSL-2544N using the ethernet cable provided. Then connect the power cable on the DSL-2544N. The power light will display as solid green.

Then simply open a browser window and enter the IP address in the browser address field:

IP ADDRESS: http://192.168.1.1

USERNAME: admin

PASSWORD: admin

Dsl-2544n

3

4

TROUBLESHOOTING set-uP anD ConFiGuration ProBleMs

1. HOW DO I CONFIGURE MY DSL-2544N ROUTER WITHOUT THE CD, OR CHECK MY

WIRELESS NETWORK NAME (SSID) AND WIRELESS ENCRYPTION KEY?

- Connect your PC to the router using an Ethernet cable.

- Open a web browser and enter the address http://192.168.1.1

- The default username is ‘admin’. The default password is 'admin'.

- If you have changed the password and can not remember it, you will need to reset the router to set the password back to 'admin'.

2. HOW DO I RESET MY DSL-2544N ROUTER TO FACTORY DEFAULT SETTINGS?

- Ensure the router is powered on.

- Press and hold the WPS/Reset button on the side of the device for 10 seconds.

Note: Resetting the router to factory default will erase the current configuration settings. To reconfigure your settings, log into the router as outlined in question 1, then run the Setup Wizard.

3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY

WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?

- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the correct Wireless Network Name (SSID) and encryption key.

- Use the web based user interface (as described in question 1 above) to check or choose your wireless settings.

- Make sure you write down these settings so that you can enter them into each wirelessly connected PC. You will find a dedicated area on the back of this document to record this important information for future use.

4. WHY CAN I NOT GET AN INTERNET CONNECTION?

- Please contact your ISP to make sure the service has been enabled/connected by your ISP and that your ISP username and password is correct.

Dsl-2544n

NOTES

NOTES

NOTES

Wireless netWorK reMinDer

Wireless network name (ssiD)

Wireless network Password

Ver. 1.00(au) 2013/05/16 610000003390

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement