Philips 32PT81S 32" TV

QUICK USE AND INSTALLATION GUIDE
TABLE OF CONTENTS
11
12
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
Basic TV and Remote Control Operation .................2
How to Use the Install Controls ...........................3–4
Using the Language Control......................................3
Setting the Tuner Mode .............................................3
Setting the TV to Auto Program Channels ................3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the AutoChron™ control........................4
3
7
Model 32PT81S1
Color Television and Remote Control
ANT(ENNA) A & B INPUTS
Y
our TV has two separate ANT(enna)/cable
inputs on the rear of the
set. These two signal inputs
offer convenient hookup
options for both normal TV
program viewing and
Picture-In-Picture (PIP)
features.
The ANT(enna) A input is
intended for use and viewing on the TV’s main
screen. Your home’s primary antenna or cable TV
signal should be connected
to this input for normal TV
setup, use, and feature
operation.
6
5
Connect your Antenna or
Cable TV signal to the single,
75-ohm input plug on the twoway signal splitter (optional).
A typical ANT(enna)
A and PIP ANT B connection
(using a common signal source
and an optional signal splitter):
If your antenna or cable TV
signal has a round cable connector (75 ohm) on the end,
then you're ready to connect it
to the 75-ohm signal splitter.
If your antenna has flat, twinlead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300- to 75ohm adapter before connecting
to the 75-ohm signal splitter.
Then connect two lengths of RF
coaxial cable to the two output
plugs on the two-way signal
splitter (F-type connector on
both ends).
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
may not apply to your TV.
Connect the twin output
plugs on the signal splitter to
the ANT A and PIP ANT B
inputs on the rear of the TV.
Push the round connector end of
the RF coaxial cable onto the
ANT(enna) plug and screw it
down tightly (if using threaded
cables).
Combination VHF/UHF Antenna
Back of TV
300Ω (Ohm) to
75Ω (Ohm) Adapter
Twin–lead
Wire
OR
- Outdoor or Indoor Antenna Receives normal broadcast channels
2–13 (VHF) and 14–69 (UHF).
Round Cable
75Ω (Ohm)
The PIP ANT(enna) B
input is a second, or auxiliary, signal source
designed to supply your
TV’s Picture-In-Picture
(PIP) feature. For many
homes, the use of a single,
existing antenna or cable
TV source for both ANT A
and PIP ANT B will be the
preferred method of connection. This type of connection (optional signal
splitter required) will work
properly for the TV’s main
onscreen features, as well
as retain all the features
designed for PIP. For more
details, refer to the PictureIn-Picture section in your
other owner’s manual.
8
M-Link
+ R –
– L +
SURROUND SOUND
AV1 in
Monitor out
ANT "A"
75Ω
AV2 in
VIDEO
Y
L/Mono
S-VIDEO
Pb
AUDIO
R
2
1
Pr
PIP ANT(enna)
B Input
8
M-Link
– L +
SURROUND SOUND
OR
AV1 in
ANT "A"
75Ω
VIDEO
Y
L/Mono
Pb
OPTIONAL TWO-WAY
SIGNAL SPLITTER
(single, 75-ohm input to twin,
75-ohm outputs – optional RF
coaxial connecting cables
also required)
AUDIO
R
Connect to ANT A Input
OUT
IN
S-VIDEO
NOTE: Although the PIP ANT B input can be used and
swapped as the source for the TV’s main picture, certain
setup features (such as AutoChron™) are based only on a signal being detected at the ANT A input. To ensure that all features are operating properly, you may not want to rely solely on
the PIP ANT B input as your TV’s main screen signal source.
• The signal routed to the TV’s ANT A
input will allow for premium/movie
channels to be viewable on the TV.
• Channel selection will be at the converter.
• The ANT A input channel on the TV
should be set to the same output channel
as the converter box (usually CH 3 or 4).
F
3
Pr
NOTE: Proper operation of your TV is not dependent
upon connection of the PIP ANT B input. The main purpose
of the input is to provide an easily connected, dedicated picture
source for use of the PIP feature. The PIP ANT B input can,
however, be used to connect and display other signal source
options such as a satellite dish system, an additional external
antenna, a VCR, or a video game, for example.
Cable TV Company
2
CABLE CONVERTER BOXES
• Combination
VHF/UHF antenna.
AV2 in
ANT(enna) A
Input
Cable TV Signal
Round Cable
75Ω (Ohm)
Your TV can set itself
to select only the channel numbers on your
cable system (see
“Auto Program" on
page 3). If you use a
cable converter box, set
the TV to the same
channel as the converter's CH 3/4 switch (on
the back of the converter).
• 300Ω (ohm) to
75Ω (ohm) adapter
8
+ R –
Remember, be
sure to set the TV for
the type signal to
which you've connected. (See the “Tuner
Mode A/B” section on
page 3.)
• Two-way signal
splitter
PIP ANT "B"
75Ω
Monitor out
SMART
HELP
Contact your dealer,
or call our Parts
Information Center at
1-800-851-8885 to
order the following
accessories:
8
PIP ANT "B"
75Ω
CABLE BOX
or homes with cable
TV converter descrambler boxes (with premium/movie channels scrambled), follow the steps to
the right for an alternative
ANT A and PIP ANT B
feature hookup. Note that
the Cable TV signal will be
split before connection to
the converter box (an
optional two-way, 75-ohm
signal splitter will be
required).
For details on product registration, warranty,
and service, refer to the other literature included
with your TV information packet.
2
4
8
ANTENNA OR
CABLE TV
•
Getting Started
1
10
9
Connect to PIP ANT B Input
3
• The signal routed to
the TV’s PIP ANT B
input will allow for the
selection and viewing of
cable channels at the TV
(except for the scrambled
premium/movie channels).
4
Cable TV Company
OPTIONAL TWO-WAY
SIGNAL SPLITTER
1
Connect your cable
TV signal to the single, 75-ohm
input plug on a two-way signal
splitter (optional).
Cable TV Converter
Box Connection
Connect one end of the
RF coaxial cable to each of
the output plugs on the 75-ohm
signal splitter. The two lengths
of RF coaxial cable need Ftype connectors (screw-on or
push type) for both ends.
1
Connect one of the signal
splitter outputs to the input
terminal on the Cable TV converter box. Then route another
connection from the cable converter output terminal to the
ANT A input on the rear of the
TV.
Connect the remaining
signal splitter output from
the splitter to the PIP ANT B
input on the rear of the TV.
3135 015 21371
TV AND REMOTE CONTROL OPERATION
TELEVISION
Press the VOL (+) button
to increase the sound level or
the VOL (–) button to lower
the sound level.
Press the POWER
button to turn the TV ON.
Pressing both VOL (+) and (–)
buttons at the same time will
display the onscreen menu.
After you are in the menu, use
these buttons to make adjustments or selections.
Point the remote control
toward the remote sensor window on the TV when operating the TV with the remote.
Press the CH (➐) down or
(☞) up button to select TV channels. Use these buttons to make
adjustments or selections in the
onscreen menu.
NOTE: Press three number
buttons on the remote control
for channels 100 or above. For
example: Press 1 then 2 then 5
for channel 125.
2
REMOTE SENSOR WINDOW
–
–
POWER
REMOTE
MENU
CH
1
BATTERY INSTALLATION
ER
POW
3
ZE
PIPSITION
P
SLEE
T
+
+
VOL
FF
CH
PIP
UP
ON/O
o load the supplied batteries into the remote:
FREE
PO
CR
TV/V A/CH
DN
URCE
SO
SWAP
URE
PICT
INK
1. Remove the battery compartment lid on the back of the remote.
M-L
D
SOUN
U
4
2. Place the batteries (2- AA) in the
remote. Be sure the (+) and (–) ends
of the batteries line up correctly (the
inside of the case is marked).
MEN
CH
E
MUT
CK
CLO
VOL
IT
CC
AL
SON
S/EX
URCE
U
STAT
E
PER
HOM
E
SO
HOM
/REC
ITR
VIES
MO
EO
VID
F
SUR
ER
RR.
SU
CR.
IN
3. Reattach the battery lid.
GRAM
PRO
LIST
LOSE
N/C
OPE
TUN
A/B
Power Button
Press to turn the TV ON and OFF.
PIP Buttons
Press to operate Picture-In-Picture features. See the PIP
section in the Instructions for Use manual for details.
Sleep Button
Press to set the TV to automatically turn itself OFF after a
period of time. Choose 15, 30, 45, 60, 90, 120, 180, or 240
minute before the TV will automatically turn off.
Light Button
Press to back-light the buttons on the remote control.
TV/VCR (A/CH) Button
TV/VCR – Press while in the VCR mode (the VCR indicator
on the front of the VCR will light) to view the playback of a
tape. Press again to place in the TV position (the VCR indicator light will go off) to view one program while recording
another program.
A/CH – Press to toggle between the currently viewed channel and the previously viewed channel.
Sound Button
Number Buttons
POWER
SLEEP
PIP
TV/VCR
ON/OFF
POSITION
FREEZE
A/CH
SWAP
PIP CH
SOURCE
DN
UP
Press to select an AutoSound™ control. Choose from three
factory-set controls (VOICE, MUSIC, and THEATRE) and a
PERSONAL control that you set according to your own preferences through the onscreen Sound menu. The three factoryset controls will tailor the TV sound so as to enhance the particular type of program you are watching.
Menu Button
Press for the onscreen menu to appear. Pressing the menu
button after menu selections are made will eliminate the
menu from the display.
SOUND
PICTURE
MENU
M-LINK
Picture Button
Press to select an AutoPicture™ control. Choose from four
factory-set controls (MOVIES, SPORTS, WEAK SIGNAL,
and MULTI MEDIA) and a PERSONAL control that you
set according to your own prefernces through the onscreen
PICTURE menu. The four factory-set controls will tailor
the TV picture so as to enhance the particular type of program you are watiching, or improve the picture of a program that has a weak signal.
M-Link Button
Press to access the onscreen menu for the M-Link feature.
(See the M-Link Instructions for Use that came with your
TV for details and instructions.)
Cursor Buttons (Left, Right, Up, Down)
Press these buttons to highlight, select, and adjust items on
the TV's onscreen menu.
Volume (+) or (–) Buttons
Press the number buttons to select TV channels. When
selecting single-digit channels, press the number of the
desired channel. The TV will pause for a few seconds and
then tune to the selected channel. (Note: You can press 0,
then the number also.) For channels 100 and above, first
press 1 then the next two numbers of the desired channel.
Channel (+) or (–) Buttons
Press to adjust the TV sound level.
Press to change the tuned channel.
Mute Button
CC Button
Press to turn the TV sound OFF. Press again to return the
sound to its previous level.
Press to select Closed Captioning options within the menu.
(See the Instructions for Use manual for details.)
Status/Exit Button
Clock Button
Press to see the current channel number on the TV screen.
Also press to clear the TV screen after control adjustments.
Source Button
ITR/REC Button
After you’ve followed the easy steps for setting up your
VCR to work with the M-Link feature, you can press this
button to record TV programs with your VCR. (See the
M-Link Instructions for Use that came with your TV for
details and instructions.)
Personal Button
MUTE
SOURCE STATUS/EXIT
ITR/REC
HOME
CC
CLOCK
HOME
PERSONAL
After you’ve followed the easy steps for recording a macro
(a set of up to eight actions) within the M-Link feature, press
this button to have M-Link run the macro. (See the M-Link
Instructions for Use that came with your TV for details and
instructions.)
Home Movies Button
Home Video Button
After you’ve followed the easy steps for setting up your
VCR to work with the M-Link feature, you can press this
button to play videotapes on your VCR. (See the M-Link
Instructions for Use that came with your TV for details and
instructions.)
CH
VOL
Press repeatedly to select the different signal sources connected to the A/V inputs on the TV.
Press the CLOCK button to access the onscreen Clock
menu.
VIDEO
After you’ve followed the easy steps for setting up your
DVD to work with the M-Link feature, you can press this
button to play your DVD discs. (See the M-Link Instructions
for Use that came with your TV for details and instructions.)
MOVIES
INCR. SURR.
SURF
Surf Button
Press to set various factory Surround Sound listening modes.
Press to select previously viewed channels. You can place up
to 10 channels in memory. Then by pressing the SURF button
you can quickly view the select channels. (See the “Using the
Channel Surf Control” section in your Instructions for Use
manual to see how to select a series of channels using the Surf
button.)
Program List/OK Button
Tuner A/B Button
Press to display a list of channel numbers and their names
(see the “Tuner,” “Auto Program,” “Channel Edit,” and
“Name” sections on pages 3 and 4 for proper setup). Each
channel will appear as a selectable menu item. The current
channel will be highlighted by default. Only five channels
will be shown onscreen at one time; press the CURSOR UP
or CURSOR DOWN button to scroll the list and highlight a
channel. Press the CURSOR RIGHT button to tune to the
highlighted channel. Channels marked “Skipped” in the
“Channel Edit” control will not appear in the list. Each
channel that is being blocked by AutoLock™ will appear
with a padlock icon to indicate that the channel is not viewable. PROGRAM LIST/OK also works as a
confirmation/select button for VCR use.
Press to select the signal coming from the ANT IN A or ANT
IN B connection.
VCR §§, ■, ©, ©©, II Buttons
Press to rewind, stop, play, fastforward, or pause a
videotape.
PROGRAM LIST
OPEN/CLOSE
TUNER A/B
OK
Incr. Surr. Button
Open/Close Button
SMART HELP
Remember, you can press
any button on the front of
the TV to turn the TV ON.
2
Press to open or close the DVD drawer for easy loading
and unloading of DVD discs.
The tuned channel number will
always briefly appear on the screen
when the TV is first turned ON
(and when the channel is changed).
You also can press the
STATUS/EXIT button (on the
remote control) to see what channel the TV is on.
HOW TO USE THE INSTALLATION FEATURES
LANGUAGE
Press the MENU button on the remote control to
show the onscreen menu.
or or Spanish- and
French-speaking TV
owners, an onscreen LANGUAGE option is present.
The LANGUAGE control
enables you to set the TVÕs
onscreen menu to be shown
in either English, Spanish, or
French.
F
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
PICTURE
SOUND
FEATURES
INSTALL
SLEE
P
TV/V
1
PIC
TUR
TE
STAT
U
CH
S/EX
IT
CLO
CK
HOM
E
PER
SON
AL
MO
VIE
S
SUR
Remember, the LANGUAGE control
makes only the TVÕs onscreen MENU items
appear in English, Spanish, or French text. It does
not change the other onscreen text features, such as
Closed Captioning (CC), with TV shows.
4
CC
HOM
E
VID
EO
3
MU
RCE
C
R.
PRO
GRA
Press the
STATUS/EXIT button to
clear the menu from the
screen.
SMART HELP
INK
SOU
/RE
DN
Press the CURSOR UP
or CURSOR DOWN button
to select ENGLISH,
ESPANOL (Spanish), or
FRANCAIS (French).
E
VOL
ITR
CH
Press the CURSOR
RIGHT button to highlight
the LANGUAGE control
options.
3
M-L
6
ENGLISH
FRANCAIS
˜
ESPANOL
EZE
9
0
MEN
U
FRE
6
8
ND
PIP
UP
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
ER
PIP
TIO
N
5
5
SOU
2
POSI
2
4
INC
R.
FF
RCE
1
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
POW
ON/O
SOU
7
5
CR
SW
AP
Press the CURSOR
RIGHT button to shift the
menu to the left and highlight
LANGUAGE.
Pressing the STATUS/EXIT button on your remote
control after making adjustments to the TV will
remove the menu from the screen. You also can
back out of the menu by repeatedly pushing the
MENU button on your remote control.
M LI
ST
OPEN
OK
SUR
/CLO
SE
F
TUN
E
TUNER MODE A/B
Press the MENU button on the remote control to
show the onscreen menu.
Y
our TV is equipped with
two tuners. This allows for
easy Picture-In-Picture usage
or a dual-signal source such
as cable and satellite. The
TUNER MODE A and
TUNER MODE B feature will
let you set each tuner for a
CABLE or an ANTENNA signal, or they can be set to
AUTO. The AUTO setting will
choose the type of signal
detected when the Auto
Program feature is activated.
(See “Auto Program” below.)
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
RIGHT button to shift the
menu to the left.
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
P
1
CR
SW
AP
2
7
EZE
3
6
8
9
0
PIC
TUR
AUTO
CABLE
ANTENNA
E
VOL
EC
TE
CH
IT
HOM
2
CLO
E
EO
CK
HOM
E
MO
VIE
PER
S
SON
AL
R.
4
GRA
M LI
ST
SUR
F
When CABLE is
selected, channels 1–125
are available.
6
TUN
ER
SMART HELP
5
CC
VID
SUR
3
MU
STAT
U
S/EX
ITR
/R
OPEN
/CLO
SE
FRE
CH
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INK
RCE
PRO
N
If, however, you want to set
the TUNER MODE to
CABLE or ANTENNA, press
the CURSOR UP or CURSOR DOWN button until
either CABLE or ANTENNA
is highlighted.
M-L
SOU
INC
R.
PIP
POSI
TIO
ER
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
DN
5
7
ND
PIP
RCE
4
SOU
FF
UP
SOU
1
MEN
U
POW
ON/O
Press the CURSOR
RIGHT button to highlight the
tuner options.
With the TUNER
MODE control set to AUTO,
Auto Program (see below)
will detect whether or not
cable input is present.
Press the
STATUS/EXIT button to
clear the menu from the
screen.
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
SLEE
TV/V
Press the CURSOR
DOWN button until either
TUNER MODE A or TUNER
MODE B is highlighted.
A/B
When ANTENNA is selected,
channels 2–69 are available.
AUTO PROGRAM
Press the MENU button on the remote control to
show the onscreen menu.
our TV can automatically
set itself for local area
(or cable TV) channels. This
makes it easy for you to
select only the TV stations in
your area by pressing the
CHANNEL (+) or (Ð) button.
Y
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
RIGHT button to shift the
menu to the left. LANGUAGE
will be highlighted.
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
P
1
CR
SW
AP
2
4
ND
MEN
U
6
RCE
C
PIC
HOM
E
VID
EO
MO
VIE
S
SUR
R.
RAM
LIST
/CLO
SE
SUR
F
3
TE
CH
CLO
PER
SON
AL
CK
ER
PIP
TIO
N
FRE
EZE
CH
SMART HELP
TUR
E
CC
HOM
CHANNEL 12
9
0
MU
STAT
U
S/EX
IT
/RE
E
OPEN
POSI
INK
SOU
ROG
PIP
M-L
ITR
CABLE TUN-A
PLEASE WAIT
DN
VOL
INC
R.
FF
6
8
SOU
ON/O
UP
3
5
7
SEARCH
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
POW
SOU
RCE
1
Press the
STATUS/EXIT button to
clear the menu from the
screen.
Press the CURSOR
RIGHT button to start the
Auto Program scanning of
channels.
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
SLEE
TV/V
Press the CURSOR
DOWN button repeatedly
until the AUTO PROGRAM
control is highlighted.
2
4
5
After youÕve run Auto
Program, check out the
results. Press the CHANNEL
(+) or (Ð) button and see which
channels you can select.
3
Remember, an antenna or cable
TV signal must first be connected to your TV (see instructions for making connections
on page 1 of this guide).
If you want to delete any
unwanted channels from the
TVÕs memory, see the ÒCHANNEL EDITÓ section on page 4.
HOW TO USE THE INSTALLATION FEATURES
CHANNEL EDIT
C
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
PICTURE
SOUND
FEATURES
INSTALL
SLEE
P
TV/V
CR
1
ON/O
SOU
6
5
7
D
N
PIP
UP
FREE
ZE
CH
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
DN
3
9
0
PIC
INSTALL
LANGUAGE
TUNER A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
TUR
E
M-L
INK
VOL
RCE
3
MU
SOU
TE
STAT
US
CH
/EXI
ITR/
REC
T
HOM
E
EO
2
CLO
CK
E
VID
PERS
ONAL
MO
VIES
4
SUR
F
A/B
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
66
67
68
69
AV1
NOTE: When you want to
add a channel that has been
marked SKIPPED, press the
CURSOR UP or CURSOR
DOWN button to highlight
the channel; then press the
CURSOR RIGHT button to
remove the word SKIPPED.
SKIPPED
SKIPPED
SKIPPED
SKIPPED
SMART HELP
7
The channels available for you to edit are the ones that the AUTO PROGRAM feature found through a search of your
TV antenna or cable TV signals. Channels not found during the search are marked SKIPPED.
6
TUN
ER
5
CC
HOM
With the channel you
want to edit selected, press the
CURSOR RIGHT button to
mark the channel as SKIPPED.
The channel youÕve marked
SKIPPED will not appear when
you are changing from channel
to channel while watching TV.
Press the CURSOR
RIGHT button to access the
CHANNEL EDIT menu.
Press the CURSOR UP
or CURSOR DOWN button to
scroll through the list of available channels. Or press the
number buttons on your remote
control to select a specific channel (for example, press 0 and
then 2 to select channel 2).
Press the CURSOR
DOWN button repeatedly
until the CHANNEL EDIT
control is highlighted.
6
8
SOU
N
MEN
U
POSI
TIO
RCE
2
POW
ER
PIP
FF
SW
AP
1
4
Press the CURSOR
RIGHT button to shift the
menu to the left. LANGUAGE
will be highlighted.
Press the MENU button on the remote control to
show the onscreen menu.
HANNEL EDIT makes it
easy for you to add or
delete channels from the list
of channels stored in the TVÕs
memory.
NAME
he channel NAME feature
allows you to list the
ÒcallÓ letters of your favorite
stations beside their channel
numbers when they appear
on the screen. The TV has in
memory a list of the 50 most
popular channel names (for
example, ABC, NBC, FOX,
etc.). You also can enter a
custom name (up to five
characters).
T
7
Press the MENU button on the remote control to
show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until
the NAME control is highlighted.
Press the CURSOR
DOWN button repeatedly
until INSTALL in highlighted.
Press the CURSOR
RIGHT button to highlight the
NAME options area.
Press the CURSOR
RIGHT button to shift the
menu to the left. LANGUAGE
will be highlighted.
SLEE
P
TV/V
CR
1
SOU
1
MEN
U
PIP
UP
FREE
ZE
CH
DN
3
5
6
8
D
POSI
TIO
N
RCE
2
4
7
PIP
FF
SW
AP
SOU
N
POW
ER
ON/O
PICTURE
SOUND
FEATURES
INSTALL
9
0
PIC
TUR
LANGUAGE
TUNER MODE A
TUNER
MODE B
INSTALL
AUTO PROGRAM
LANGUAGE
CHANNEL EDIT
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
E
M-L
INK
VOL
RCE
ITR/
REC
TE
STAT
US/E
XIT
HOM
CH
CLO
CK
HOM
E
VID
EO
MO
VIES
SUR
R.
SUR
PEN/
CL
OSE
F
TUN
ER
PERS
ONAL
8
2
4
A/B
WXWXYZ-
5
CC
E
W-
Press the
STATUS/EXIT button to
clear the menu from the
screen.
WXY-
3
MU
SOU
INSTALL
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
After you have selected a
name for the channel, press
the MENU button to save the
name in the TVÕs memory.
Press the CURSOR
RIGHT button again; then
press the CURSOR UP or
CURSOR DOWN button to
scroll through a list of options for
the first character (A through Z, 0
through 9). Press the CURSOR
RIGHT button and repeat for
the second, third, fourth, and fifth
characters.
WXYZ3
SMART HELP
6
The five characters that the channel NAME feature allows you to
input can be letters, a dash character, or the numbers 0 through 9.
Up to 5 characters
AutoChron™
utoChronTM can automatically set the TVÕs
onscreen clock. Because the
time is received from a
broadcast signal, you must be
sure that a cable TV or
antenna signal is present
before you attempt to use the
AutoChronTM feature.
A
Follow these
onscreen
instructions
to set
AutoChron™
automatically.
Follow these
onscreen
instructions
to set
AutoChron™
manually.
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
Press the MENU button on the remote to show the
onscreen menu.
Press the CURSOR DOWN
button until the AutoChron control
is highlighted.
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
Press the CURSOR
RIGHT button to start the
AutoChron™ feature. Then just
follow the onscreen instructions
to set the clock.
Press the CURSOR
RIGHT button to shift the
menu to the left. LANGUAGE
will be highlighted.
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
STORE
SET TIME
AUTO
MANUAL
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
LANGUAGE
LANGUAGE
TUNER MODE ATUNER MODE A
TUNER MODE BTUNER MODE B
AUTO PROGRAMAUTO PROGRAM
CHANNEL EDIT CHANNEL EDIT
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
ENTER TIME
11:00 AM
Press the CURSOR
RIGHT button to select AUTO.
Within a few seconds, a menu
for choosing your time zone will
appear.
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
Press the CURSOR UP
or CURSOR DOWN button
to highlight your correct time
zone.
With your correct time
zone highlighted, press the
CURSOR RIGHT button.
Within a few seconds, you will
be given the option to choose
whether you want to select
Daylight Savings Time.
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
NOTE: When setting the
clock manually, press the
number buttons on the remote
control to enter the time.
Don’t forget to set AM or PM
with the CURSOR UP or
CURSOR DOWN button.
4
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SET TIME
AUTO
MANUAL
SEARCH FOR
TIME . . .
(Please wait)
12 PBS
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
Press the CURSOR UP
or CUSOR DOWN button to
navigate through the YES and
NO selection list; then with the
item you want to select highlighted, press the CURSOR
RIGHT button. Follow the
onscreen instructions (shown
below) to set the AutoChronª
time either automatically or
manually.
TIME ZONE?
CENTRAL
MOUNTAIN
PACIFIC
SEARCH FOR
TIME . . .
Time Found
PRESS TO END
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
DAYLIGHT
SAVING TIME?
YES
NO
SEARCH FOR
TIME . . .
Time Found
11:00 AM