QuickSpecs HP ProLiant DL165 Generation 7 (G7) Overview

QuickSpecs

Overview

HP ProLiant DL165 Generation 7 (G7)

Introducing the HP ProLiant DL165G7, now available with the latest high performance Opteron Eight, Twelve and Sixteen core processors, 24 DDR3 memory DIMMs, 2 PCIe Gen2 slots, four NIC ports and an Easy Setup CD.

Hot Plug SAS/SATA or Non-Hot Plug SATA Models

Front View: Rear View:

1.

2.

3.

4.

5.

Access panel

System fans

Front-panel USB 2.0 ports

Power switch/system status LEDs

Standard 1st , 2nd , 3rd and 4th 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays

6.

Optical drive bay

7.

Twenty Four DIMM Slots

8.

Slot 1:Full-length/Full height x16 PCI-Express Gen2 slot, or

Slot 1: Half-length/Full height x16 PCI-Express Gen2 slot and

Slot 2: Low Profile x4 PCI-Express Gen2 slot (accepts x8 cards, internal only)

9.

Two (2) AMD Opteron 6100 or 6200 series processors

1.

Power supply

2.

Optional SD Card Reader

3.

Unit Identification LED (UID)

4.

Two USB ports

5.

Optional Lights-Out 100 10/100Mbps port

6.

Serial port

7.

(2) RJ45 GbE LAN ports (3rd & 4th port)

8.

VGA port

9.

(2) RJ45 GbE LAN ports (1st & 2nd port)

10.

Slot 1:Full-length/Full height x16 PCI-Express Gen2 slot, or

Slot 1: Half-length/Full height x16 PCI-Express Gen2 slot and

Slot 2: Low Profile x4 PCI-Express Gen2 slot (accepts x8 cards, internal only)

What's New

Support for 6200 series processors

Support for PC3-12800R (DDR3-1600) Registered CAS-11 Memory DIMMs

DA - 13602 Worldwide — Version 34 — September 24, 2012 Page 1

QuickSpecs

Standard Features


NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Integrated Models" section.

Processor

One of the following depending on Model

Sixteen-Core Processors

AMD Opteron™ 6276 (2.30GHz/16-core/16MB/115W) Processor



AMD Opteron™ 6262HE (1.60GHz/16-core/16MB/85W) Processor

Twelve-Core Processors





NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.



Eight-Core Processors






NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.




Four-Core Processors


NOTE: Up to two AMD Opteron™ 6000 series Eight, Twelve and Sixteen Core processors supported.

NOTE: Processor wattage references reflect Thermal Design Power (TDP). For more information on TDP and Average CPU Power (ACP) visit: http://www.amd.com/acp

NOTE: Up to 3.0GHz clock speed.

NOTE: Supports DirectConnect Architecture.

NOTE: Supports Power Now.

Cache Memory

Chipset

Upgradeability

16MB shared L3 (Model Series 6000)

AMD Chipset SR5670/SP5100

Upgradeable to two processors


QuickSpecs

Standard Features

Memory Protection Advanced ECC


Memory

One of the following depending on Model

Type

DIMM Slots Available

Standard

PC3-10600R DDR3 Registered (RDIMM) or Unbuffered (UDIMM)

24 DIMM slots

Entry Model

Base Model

4 GB (2 x 2 GB) RDIMMs


Maximum (RDIMM)

Performance Model

384 GB


(24 x 16 GB)

Maximum (UDIMM) 64 GB (16 x 4 GB)

NOTE: Depending on the memory configuration and processor model, the memory speed may run at

1333MHz, 1066MHz, or 800MHz. DDR3-1600MHz memory speed is only supported by 6200 series

Opteron™ Processors.

(2) HP NC362i Integrated Dual Port Gigabit Server Adapter Network Controller

Expansion Slots #

1

2 ***

Technology Bus

Width **

Connector

Width

Bus Number * Device No.

** Form

Factor

Notes

PCI-Express

2.0

x16 x16 5 0 Full

Height/Full

Length

3.3 volts

PCI-Express

2.0

x4 x8 2 0 Half

Height/Low

Profile,

Internal Only

3.3 volts

* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.

** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).

***In order to access expansion slot #2, the low profile internal only slot, expansion slot #1 may only be populated with a half length, full height form factor card.


QuickSpecs

Standard Features

Storage Controller


Non-Hot Plug SATA

Cold Plug SATA Models

HP Smart Array B110i SATA RAID Controller

NOTE: To enable RAID for embedded SATA controller, use EZ set-up CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup

CD. For more information on Smart Array B110i, go to: www.hp.com/go/sataraid


NOTE: Supported on LFF models only.

Hot Plug SATA/SAS HP Smart Array P410 Controller (RAID 0/1/1+0)

HP Smart Array P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)

NOTE: Transfer rate: up to 3 Gb/s SATA, up to 6 Gb/s SAS.


NOTE: Hot plug functionality requires the addition of a Smart Array Advanced

Pack License Key upgrade (P/N TC421A)

NOTE: To enable RAID for embedded SATA controller, use EZ set-up CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup

CD. For more information on Smart Array, go to: www.hp.com/go/sataraid

NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD.

NOTE: Addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive extension, RAID migration, and stripe size migration.

NOTE: RAID 6 functionality requires the addition of Smart Array Advanced Pack (P/N: 516471-B21).

NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.

Internal Storage Devices

Drives

Maximum Internal

Storage

Diskette Drives

Optical Drives

Hard Drives

Via USB only

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

Up to 4 Non-hot plug SATA 3.5" drives

Up to 4 Hot plug SAS/SATA 3.5" drives

Up to 8 Hot plug SAS 2.5" drives

Non-Hot Plug LFF SATA 12.0TB

Hot Plug LFF SATA

Hot Plug SFF SATA

12.0TB

8.0TB

Hot Plug SFF SATA SSD

Hot Plug LFF SATA SSD

Hot Plug LFF SAS

Hot Plug SFF SAS

Hot Plug SFF SAS SSD

3.2TB

1.6TB

12.0TB

8.0TB

6.4TB

4 x 3TB

4 x 3TB

8x1TB

8 x 400GB

4 x 400GB

4 x 3TB

8 x 1TB

8 x 800GB


QuickSpecs

Standard Features

Interfaces


Parallel None

Network RJ-45(Ethernet) 4 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP ProLiant

Lights Out 100i Remote Management)

Serial 1

Pointing Device (Mouse) 0 (via USB only)

Graphics 1

Keyboard

USB

0 (via USB only)

6 (two front, two internal, two rear)

NOTE: One optional internal USB connector is reserved for connection to the rear SD Card Reader (592710-B21)

NOTE: In order to connect a USB device internally, the internal USB Cable G6

Kit must be used (536769-B21)

Industry Standard

Compliance

Server Power Cords

Power Supply

System Fans

ACPI V2.0 Compliant

PCI 2.2 Compliant

PXE Support

WOL Support

Microsoft® Logo certifications

IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

One 6' Highline (IEC-IEC) power cord ships standard

NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to

PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord must be ordered separately.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord.

Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix .

500 Watts, auto-switching, high efficiency, PFC (Power Factor Correcting).

NOTE: Factory upgradeable to high-efficiency 750W pluggable power supply.

750W Common Slot high efficiency, hot-pluggable power supply, FIO (Optional)

4 non-hot plug system fans ship standard with 1P models, optional upgrade to N+1 redundant.

7 non-hot plug system fans ship standard with 2P models, N+1 Redundant Standard


QuickSpecs


Standard Features

Operating Systems and

Virtualization Software

Support for ProLiant

Servers

Microsoft Windows Server

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

VMware

Citrix Essentials for XenServer (Retail)

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization

Software and latest listing of software drivers available for your server, including how to purchase from

HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/DL165G7 .

Graphics 32MB shared supporting all display resolutions up to 1600x1200 16bpp@75Hz

NOTE: 8MB is dedicated to video memory.

Form Factor Rack (1U), (1.75 in/4.45 cm)

NOTE: Fixed mounting rails included with all models.

Embedded Manageability HP LO100 Advanced HP Lights-Out 100 with Optional LO100 Advanced Licenses for Virtual KVM and

Virtual Media.

Standard Features:

Embedded IPMI standard reporting

System event log access

Remote Serial console (serial redirection)

Browser, Telnet access

SMASH-CLP compliant

IPMI 2.0 compliant

Secure Socket Layer (SSL) Encryption

Secure Shell (SSH) Encryption

Licensed Features:

Virtual media (Floppy, CD, USB 2.0)

Virtual KVM

NOTE: Flexible and volume quantity (AKA) license kits are available for the

Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-

LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products. QuickSpecs at this link for more information: www.hp.com/go/lo100


QuickSpecs

Standard Features

Security Power-on password

Setup password

Diskette boot control

Secure Sockets Layer (SSL)

Secure Shell (SSH)

Warranty


This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support.

Warranty terms may vary by region. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

.


QuickSpecs

Optional Features

HP Insight Control management software

HP Insight Control for

Linux


Insight Control server deployment

HP Insight Control for Linux, as a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. The Insight Control for Linux installs and license software modules that are integrated into HP System

Insight Manager.

The HP Insight Control for Linux (IC-Linux) serves environments requiring a

Linux-based management consoles. See: www.hp.com/go/ic-linux

HP Insight Control include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight .

HP Insight Control server deployment is a deployment solution for HP ProLiant and Integrity servers hosted on a Windows CMS. It automates the process of deploying and provisioning server software, enabling companies to quickly and easily adapt to changing business demands. Insight Control server deployment includes software optimizations for HP servers, including the HP scripting toolkits, configuration jobs for leading industry-standard operating systems, sample unattended files, and HP server support packs that include software drivers, management agents, and important documentation.

Deploying servers can be accomplished either through imaging or through scripting.

Insight Control server deployment is hosted on a Windows server and is intended for heterogeneous environments deploying Windows, Linux, VMware

ESX and Microsoft Hyper-V systems.

Insight Control server deployment includes one year of 24 x 7 HP Software

Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight .


QuickSpecs

Optional Features

High Performance

Clusters


HP Cluster Platforms

HP HPC Interconnects

HP Insight Cluster

Management Utility

HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux

Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster

Platform Configurator simplifies ordering. http://www.hp.com/go/clusters

High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio. These high-speed

InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools.

http://www.hp.com/techservers/clusters/ucp/index.html

HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective.

http://www.hp.com/go/cmu

HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported option to HP Insight CMU, for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform LSF workload scheduler and Platform Application Center, as well as the HP-MPI parallelization library. HP HPC Linux Value Pack

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express .

HP Simple Configurator HP Simple Configurator SCE is a guided self service tool to help sales and non technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an

Authorized Partner for assistance. http://www.hp.com/products/configurator


QuickSpecs

Service and Support

Service and Support


HP Technology Services for Industry Standard Servers and BladeSystem

Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.

What HP ProLiant and BladeSystem Services can do for you

HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage

IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift of base warranty. You can get the support you need by choosing from one of a number of service packaged solutions we have designed to address wider set of customer support needs.

HP Technology Services meets business challenges with services offered in three packages:

Optimized Care Package, Standard Care Package, and Basic Care Package

Available for each product group. Such packaged solutions enable customers to optimize technology operations, minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support packages for servers, storage, networking and software.

Optimized Care Package Supports maintaining servers at optimum performance availability

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service

Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the system to help return the hardware to operating condition within 6 hours of the initial service request to the HP Global Solution Center.


Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) Installation and Start Up and Software

Support) plus Microsoft or Linux education courses +30 Proactive Select Credits, Factory Express.


QuickSpecs


Service and Support

Standard Care Package Package that maintains high level of server availability


Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.


3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service

Provides you with rapid remote support and if required an HP authorized representative who will arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of the service request being logged.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf


Support); +10 Proactive Select Credits, Factory Express.

Basic Care Package Delivers minimum recommended support service level


Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

3-Year HP 13x5 4 hour Response, Hardware Support Onsite Service

Delivers increased equipment availability and productivity with rapid remote support and onsite response for your HP server and storage hardware http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf


Support), Factory Express.

Insight Remote Support The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable

24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers.

For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant


QuickSpecs

Pre-configured Models


NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Integrated Models" section.

NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.

NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.

NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this

QuickSpecs.

NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.

Cold Plug/Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

Performance Model Processor(s)

HP ProLiant DL165 G7

6274 2P 16GB-R P410/256

Hot Plug 8 SFF 750W PS

Server

663809-xx1

Cache Memory

Memory

Network Controller


Hard Drive

Internal Storage

Optical Drive

Power Supply

(2) AMD Opteron™ 6274 (2.2GHz/16-core/16MB/115W) Processors

16 MB shared L3 cache

16GB (8 x 2GB) PC3-10600R (RDIMM)

2x HP NC362i Integrated Dual Port Gigabit Server Adapter

HP Smart Array P410/256MB BBWC

None ship standard

8.0TB (8 x 1TB Hot Plug 2.5" SATA Hard Drives), Maximum

8.0TB (8 x 1TB Hot Plug 2.5" SAS Hard Drives), Maximum

None ship standard

750W Common Slot Gold Power Supply

Form Factor

Warranty

1U

Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,

0-Years Onsite support. Warranty terms may vary by region.

Base Model


6272 1P 8GB-R P410 Hot

Plug SAS/SATA 4 LFF

500W PS Server

663808-xx1

Processor(s)

Cache Memory

Memory



Hard Drive


Optical Drive

Power Supply

Form Factor

Warranty

Entry Model


Processor(s)

Cache Memory



8GB (4 x 2GB) PC3-10600R (RDIMM)


HP Smart Array P410 SAS/SATA RAID

None ship standard



None ship standard

500W Power Supply

1U






QuickSpecs

Pre-configured Models


6234 1P 4GB-R Hot Plug

SATA 4 LFF 500W PS

Server

663807-xx1

Memory



Hard Drive


Optical Drive

Power Supply

Form Factor

Warranty

Country Code Key xx=00 xx=29 xx=37 xx=42 xx=AA


4GB (2 x 2GB) PC3-10600R (RDIMM)

NOTE: Total 24 DIMM slots.


HP Smart Array B110i

None ship standard



None ship standard

500W Power Supply

1U



U.S.

Japan

APJ

Euro

PRC


QuickSpecs

Configuration Information - Factory Integrated Models


NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE: Factory Integrated Models must start with a CTO Server.

NOTE: FIO indicates that this option is only available as a Factory Installable Option.

Step 1: Base Configuration

Non-Hot Plug SATA Model (choose one of the following configurable models)

HP ProLiant DL165 G7 Non-hot Plug Configure-to-order Server

Factory Integrated Model ships with:

Two HP NC362i Integrated Dual Port Gigabit Server Adapters

Slot 1: FL /FH PCI-Express x16 Gen 2 slot or

Slot 1 : HL/FH x16 PCI-Express Gen2 slot and

Slot 2 : HL/LP x8 PCI-Express Gen2 slot (internal only)


One Highline IEC Power Cord

4 Fixed, Non-Redundant Fans (standard); 6 Fixed, N+1 Redundant Fans (standard with addition of second processor)

Rack (1U), (1.75 in / 4.45 cm)

Tool-less Fixed Rails

Hot Plug/Cold Plug Models

HP ProLiant DL165 G7 LFF Configure-to-order Server








Rack (1U), (1.75 in / 4.45 cm)


HP ProLiant DL165 G7 SFF Configure-to-order Server








591660-B21

592226-B21

592227-B21


QuickSpecs



Rack (1U), (1.75 in / 4.45 cm)


NOTE: SFF CTO Chassis (P/N: 592227-B21) requires the use of the HP 750W CS HE

Power Supply (P/N: 535683-B21)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

HP Processors NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.

Sixteen-Core Processors

HP DL165 G7 AMD Opteron™ 6276 (2.30GHz/16-core/16MB/115W) FIO Processor Kit



HP DL165 G7 AMD Opteron™ 6262HE (1.60GHz/16-core/16MB/85W) FIO Processor Kit


663371-L21

663373-L21

663375-L21

663385-L21








663377-L21

663379-L21

663381-L21

663383-L21

672323-L21

HP Memory Registered DIMMs (RDIMMs)

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit

HP 4GB (1x4GB) Single Rank x4 PC3-12800 (DDR3-1600) Registered CAS-11 Memory Kit


HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power

Memory Kit



HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power

Memory Kit

HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit

HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP

Memory Kit

HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory

Kit

Unbuffered with ECC DIMMs (UDIMMs)

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit


NOTE: All DDR3 memory option kits consist of one DIMM per kit. DDR3-1600MHz

593921-B21

593923-B21

593907-B21

676331-B21

593911-B21

604500-B21

676333-B21

593913-B21

604502-B21

593915-B21

627808-B21

684066-B21


QuickSpecs


Configuration Information - Factory Integrated Models memory speed is only supported by 6200 series Opteron™ Processors.

NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant

Energy Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient

NOTE: There is a maximum support limitation of 8 ranks per memory channel

(maximum of 2 quad rank DIMMs per channel)

NOTE: PC3L is a low voltage memory.

HP Hard Drives NOTE: A minimum of one SATA Non-Hot Plug hard drive is required ONLY when purchasing Non-Hot Plug CTO Chassis Model (P/N 591660-B21) in Step 1.

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.


Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)

SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive


HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard

Drive

HP Storage Controllers NOTE: A minimum of one primary HP Storage Controller is required ONLY when purchasing SFF CTO Chassis Model (P/N 592227-B21) in Step 1.

NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive extension,

RAID migration, and stripe size migration. In order to upgrade to RAID 6, at least 256MB

Cache and a Battery is required in addition to the Smart Array Advanced Pack license

(P/N 516471-B21).

NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO Chassis, a

HP Smart Array P410 controller must be selected. When selecting the HP Smart Array

P212/256 BBWC 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller (P/N 491191-B21), the controller will be installed in the x16 slot since it has both an internal and external port. This prevents the use of the internal slot and no PCI-E slots will be available.

HP Smart Array P812/1G FBWC 2-ports Int/4-ports Ext PCIe x8 SAS Controller

HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller

HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller

HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller

HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller

HP Smart Array P411/256 BBWC 2-ports Ext PCIe x8 FIO SAS Controller

HP Smart Array P410/256 BBWC 2-ports Int PCIe x8 FIO SAS Controller

HP Smart Array P410/512 BBWC 2-ports Int PCIe x8 SAS Controller

571232-B21

507774-B21

507772-B21

458941-B21

487204-B21

572532-B21

578230-B21

462860-B21

462862-B21

491193-B21

491195-B21

462864-B21


QuickSpecs



HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP

Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: http://www.hp.com/go/hppoweradvisor

HP 500W Factory Integrated Power Supply Kit

HP 750W Common Slot Gold Hot Plug Factory Integrated Power Supply Kit with

Backplane

Step 3: Choose Additional Factory Integratable Options

HP Storage Controllers NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive extension,


Cache and a Battery is required in addition to the Smart Array Advanced Pack license

(P/N 516471-B21).

NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO Chassis, a

HP Smart Array P410 controller must be selected. When selecting the HP Smart Array

P212/256 BBWC 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller (P/N 491191-B21), the controller will be installed in the x16 slot since it has both an internal and external port. This prevents the use of the internal slot and no PCI-E slots will be available.

HP Smart Array P212/256 BBWC 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller

NOTE: P212 may be used as external controller only in SFF models.

HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller

HP Smart Array P410/256 BBWC 2-ports Int PCIe x8 FIO SAS Controller

Step 4: Choose Additional Options for Factory Integration

NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.

515915-B21

535683-B21

491191-B21

462860-B21

491195-B21


QuickSpecs

Core Options


NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Unique Options HP Dedicated Management Port Kit 516006-B21

HP Processors Sixteen-Core Processors

HP DL165 G7 AMD Opteron™ 6276 (2.30GHz/16-core/16MB/115W) Processor Kit



HP DL165 G7 AMD Opteron™ 6262HE (1.60GHz/16-core/16MB/85W) Processor Kit



















NOTE: Supports up to two AMD Opteron™ 6000 series Eight Twelve and Sixteen Core processors.

NOTE: Processor wattage references reflect Thermal Design Power (TDP). For more information on TDP and Average CPU Power (ACP) visit: http://www.amd.com/acp

NOTE: Supports DirectConnect Architecture.

NOTE: Supports Power Now.

663371-B21

663373-B21

663375-B21

663385-B21

663377-B21

663379-B21

635812-B21

601118-B21

601113-B21

601116-B21

663381-B21

663383-B21

635818-B21

601112-B21

601115-B21

635891-B21

601111-B21

601110-B21

672323-B21


QuickSpecs

Core Options

HP Memory


Registered DIMMs (RDIMMs)





Memory Kit




Memory Kit



Memory Kit


Kit





593907-B21

676331-B21

593911-B21

604500-B21

676333-B21

593913-B21

604502-B21

593915-B21

627808-B21

684066-B21

593921-B21

593923-B21

HP Optical Drives

HP Hard Drives

HP 9.5mm SATA DVD-ROM Optical Drive

HP 9.5mm SATA DVD-RW Optical Drive




SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive

HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive

SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive



HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive


HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive



481045-B21

481047-B21

625609-B21

507750-B21

628059-B21

507632-B21

454146-B21

458928-B21

628063-B21

507774-B21

507772-B21


QuickSpecs

Core Options


HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard

Drive

SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive


HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive

NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html

(Worldwide)

SATA Hot Plug 2.5" Enterprise Mainstream Solid State Drives

HP 400GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State

Drive


Drive


Drive


HP 400GB 3G SATA MLC LFF (3.5-inch) Enterprise Mainstream 3yr Warranty Solid State

Drive


Drive


Drive

NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html

(Worldwide)

SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives

HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive



HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard Drive



SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive



SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive

HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

458941-B21

571230-B21

571232-B21

636597-B21

636595-B21

636593-B21

636611-B21

636609-B21

636607-B21

619291-B21

581286-B21

581284-B21

627117-B21

507127-B21

512547-B21

516828-B21

516816-B21

516814-B21

605835-B21

507610-B21


QuickSpecs

Core Options


HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive

HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive

HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive

NOTE: The purchase of SAS HBA or array controller is required.


(Worldwide)

6G SAS Hot Plug Enterprise Performance Solid State Drives

HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State

Drive

HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State

Drive

6G SAS Hot Plug Enterprise Mainstream Solid State Drives

HP 800GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State

Drive


Drive


Drive


(Worldwide)

625031-B21

507616-B21

507614-B21

632494-B21

632492-B21

632506-B21

632504-B21

632502-B21

HP Networking Gigabit Ethernet Adapters

HP NC112T PCI Express Gigabit Server Adapter

HP Ethernet 1Gb 4-port 331T Adapter

HP NC360T PCI-E Dual Port Gigabit Server Adapter

HP NC375T PCI Express Quad Port Gigabit Server Adapter

HP NC365T 4-port Ethernet Server Adapter

HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter

HP NC373T PCI-E Multifunction Gigabit Server Adapter

HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter

10 Gigabit Ethernet Adapters

NOTE: No more than two10GbE I/O devices are supported in a single ProLiant server.

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.

NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

HP NC522SFP Dual Port 10GbE Gigabit Server Adapter

HP NC523SFP 10Gb 2-port Server Adapter

HP NC550SFP Dual Port 10GbE Server Adapter

503746-B21

647594-B21

412648-B21

538696-B21

593722-B21

394793-B21

394791-B21

458492-B21

468332-B21

593717-B21

581201-B21


QuickSpecs

Core Options


HP NC552SFP 10Gb 2-port Ethernet Server Adapter

HP Ethernet 10Gb 2-port 560SFP+ Adapter

NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs

614203-B21

665249-B21

HP Cooling Options HP DL165 G7 Redundant Fan Option Kit

NOTE: Redundant Fan Option Kit ONLY required for fan redundancy in single processor configurations. Two processor configurations offer N+1 fan redundancy as standard.

593114-B21


QuickSpecs

Additional Options


NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Entry-Level Server

Management

HP Lights-Out 100i (LO100i) Advanced including 1yr 24x7 Support Single Server License

NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at: www.hp.com/go/lo100 .

530521-B21

HP Insight Software HP Insight Control for Linux

HP Insight Control for Linux including 1yr 24x7 Support Electronic License

HP Insight Control for Linux including 1yr 24x7 Support Single Server License

HP Insight Control for Linux Media Kit

NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click on

Download button).

NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.

NOTE: For additional License Kits, including electronic licensing options, please see the

QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html

(Worldwide)

HP Insight Control server deployment

HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License

HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License

NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .

NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.

NOTE: For additional license kits please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html

(Worldwide)

HP Insight Management Media Kit

NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP

Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and

Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates.

NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single activation key.

NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.

NOTE: Licenses ship without media. The HP Insight Management Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .

NOTE: For additional license options please see the Insight Control QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html

TC213AAE

TC209A

TC208A

T9082AAE

452151-B21

436222-B21


QuickSpecs

Additional Options

High Performance

Clusters


HP Insight Cluster Management Utility

HP Insight Cluster Management Utility Flexible License

NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.

NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html

(Worldwide)

HP Insight Cluster Management Utility Flexible License with 3 years of 24x7 updates and technical support

NOTE: These part numbers can be used to purchase one certificate for multiple licenses and support with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. Customer also will receive a support agreement.

HP Insight Cluster Management Utility Media

NOTE: Order a minimum of one license per cluster to purchase media including software and documentation, which will be delivered to the customer, and also licenses

Insight Cluster Management Utility Management. No license key is delivered or required.


(Worldwide)

HP HPC Linux Value Pack

HP High Performance Computing Linux Value Pack 1 Processor Flexible License

NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one socket (a.k.a. processor). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.


(Worldwide)

HP High Performance Computing Linux Value Pack Media Kit

NOTE: This part number can be used to purchase media including software and documentation, which will be delivered to the customer.


(Worldwide)

QL803B

BD476A

BD477A

TC293B

TC294A


QuickSpecs

Additional Options

HP Security


HP Trusted Platform Module Option

NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption

(BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline.

NOTE: For more information about TPM, including a white paper, go to: http://www.hp.com/go/TPM

NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.

NOTE: The TPM key is unique to every TPM deployed server and must be retained.

Misplacing or losing the key could result in data loss.

488069-B21

HP Storage Controllers SAS Controllers

NOTE: To utilize the internal only slot, the HP Smart Array P410 Controller must be selected. The selection of the HP Smart Array P212 Controller for internal and external connectivity, will require the use of the Full Length Full Height PCI-E x16 slot.

NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive extension,


Cache and a Battery is required in addition to the HP Smart Array Advanced Pack license

(P/N 516471-B21).

Smart Array P212 Controller

HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller

HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller


HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller

HP Smart Array P410/512 BBWC 2-ports Int PCIe x8 SAS Controller

HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller

HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller


NOTE: Controllers for use with external storage only.

HP Smart Array P411/256 2-ports Ext PCIe x8 SAS Controller

HP Smart Array P411/512 BBWC 2-ports Ext PCIe x8 SAS Controller

HP Smart Array P411/512 FBWC 2-ports Ext PCIe x8 SAS Controller

HP Smart Array P411/1G FBWC 2-ports Ext PCIe x8 SAS Controller


HP Smart Array P812/1G FBWC 2-ports Int/4-ports Ext PCIe x8 SAS Controller

Optional upgrades

HP 1GB Flash Backed Cache

HP 512MB Flash Backed Write Cache

462828-B21

462834-B21

462862-B21

462864-B21

578230-B21

572532-B21

462830-B21

462832-B21

578229-B21

572531-B21

487204-B21

534562-B21

534916-B21


QuickSpecs

Additional Options


HP 256MB P-series Cache Upgrade

NOTE: Supported on HP Smart Array P212 Controller only.

HP 512MB P-Series Battery Backed Write Cache Upgrade

NOTE: Supported on HP Smart Array P411 Controller only.

HP 650 mAh P-Series Battery

HP Smart Array Hot Plug Advance Pack for B110i w/1y 24x7 Supp Physical 1 Svr LTU

SAS HBA

HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS Host Bus Adapter

NOTE: This is a 2 x4 External Port HBA.

NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html

(Smart Array P212 Controller) http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html




(Smart Array Advanced Pack) http://h18004.www1.hp.com/products/quickspecs/13082_div/13082_div.html

(SC08Ge HBA)

462968-B21

462967-B21

462969-B21

TC421A

614988-B21

516937-B21

483513-B21

HP InfiniBand Options HP 10 GbE PCI-e G2 Dual Port Network Interface Card

HP InfiniBand 4X DDR PCI-E 0 Memory Dual Port HCA

NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html

(Worldwide)

HP Backup & Recovery

Software

Data Protector Express

HP Data Protector Express V5.0 for 1 Server E-LTU

HP Data Protector Express V5.0 for 3 Servers E-LTU

HP Data Protector Express V5.0 for 10 Servers E-LTU

HP Basic Upgrade to Data Protector Express V5 for 1 Server E-LTU

NOTE: Only one of these Data Protector Express base products is required. To see available options: http://www.hp.com/go/dataprotectorexpress

TC330AAE

TC331AAE

TC332AAE

TC333AAE


QuickSpecs

Additional Options

HP Tape Backup


NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK .

NOTE: Connection using the HP P212 SAS Smart Array Controller (462828-B21) recommended.

HP DAT160 SAS Internal Tape Drive

NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount Kit

(AG576B). No peripheral bay available for installation into the server.

HP Ultrium 448 SAS Internal Tape Drive



HP Ultrium 920 SAS Internal Tape Drive



HP 1/8 G2 Ultrium 920 SAS Autoloader

NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation.

HP MSL2024 Ultrium 920 SAS Tape Library

Q1587B

DW085B

EH847B

AH558A

AH559A

HP Disk Backup NOTE: For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP disk backup products see: http://www.hp.com/storage/SPOCK .

HP D2D Backup Systems with Backup Data Deduplication

HP D2D2502i Backup System

NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

HP D2D2504i Backup System

NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

USB Removable Media RDX Disk Backup Systems

HP RDX1000 Internal Removable Disk Backup System


NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 320GB of disk capacity per data cartridge.


NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 500GB of disk capacity per data cartridge.

EJ001C

EJ002C

BV847A

AJ767A

AJ934A


QuickSpecs

Additional Options

HP Storage Options


Fibre Channel HBA

NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and

Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html

Brocade Fibre Channel HBAs

HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter




Emulex Fibre Channel HBAs

HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter

HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter

HP FC2142SR 4Gb 1-port PCIe Fibre Channel Host Bus Adapter


HP SN1000E 16Gb 2-port PCIe Fibre Channel Host Bus Adapter

HP SN1000E 16Gb 1-port PCIe Fibre Channel Host Bus Adapter

QLogic Fibre Channel HBAs

HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter

HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter



SCSI HBA

HP U320e SCSI Dual Channel Host Bus Adapter

NOTE: Recommended for MSL SCSI Tape Library connect.

NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive

MSL tape libraries to ProLiant servers.

Converged Network Adapters

HP CN1100E Dual Port Converged Network Adapter

HP CN1000Q Dual Port Converged Network Adapter

HP CN1000E Dual Port Converged Network Adapter

NOTE: The iSCSI protocol and iSCSI BFS are not supported on this server.

NOTE: No more than two 10GbE I/O or CNA Stand-up cards are supported in a single HP

ProLiant server.

AH627A

BK835A

BS668A

AW520B

AP769B

AP770A

AP767B

AP768B

AJ762B

AJ763B

A8002B

A8003B

QR559A

QR558A

AK344A

AJ764A

AE311A

AE312A


QuickSpecs


Additional Options

HP Uninterruptible Power

Systems

HP Rack-mountable UPS

HP R/T3000 G2 Uninterruptible Power System (UPS)

HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System

HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System

HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System

NOTE: Please see the QuickSpecs for Technical Specifications and additional information:


(Worldwide)

HP R1500 G3 Uninterruptible Power Supply (UPS)

HP R1.5kVA G3 1U NA Uninterruptible Power System

HP R1.5kVA G3 1U JP/TW Uninterruptible Power System

HP R1.5kVA G3 1U INTL Uninterruptible Power System


(Worldwide)

HP T1000 G3 UPS

HP T1000 G3 1000VA NA Tower Uninterruptible Power System

HP T1000 G3 1000VA INTL Tower Uninterruptible Power System


(Worldwide)

HP T1500 G3 UPS

HP T1500 G3 1400VA NA Tower Uninterruptible Power System

HP T1500 G3 1400VA INTL Tower Uninterruptible Power System


(Worldwide)

NOTE: For additional information on all HP Uninterruptible Power Systems and accessories please go to: www.hp.com/products/ups (Worldwide)

NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com

NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and

Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.

Please see the following link: www.hp.com/products/powercords .

AF466A

AF467A

AF468A

AF469A

AF470A

AF471A

AF448A

AF449A

AF450A

AF451A


QuickSpecs


Additional Options

HP Intelligent Power

Distribution Units (iPDU) iPDU Core Units

HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit

HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit

HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution

Unit

HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution

Unit

HP 22kVA 32A 400V Three Phase 12 Outlet Core INTL Intelligent Power Distribution Unit

HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution Unit

HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution Unit

HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution Unit

HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit

HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit


(Worldwide)

AF520A

AF522A

AF535A

AF537A

AF538A

AF900A

AF902A

AF901A

AF525A

AF526A

HP Rack Series HP Rack 10000 G2 Series (Carbon/Graphite Metallic)

HP 10642 G2 1200mm deep Shock Rack

HP 10647 G2 1200mm deep Shock Rack

NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed.

NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels).


(Worldwide)

NOTE: For additional information regarding Rack Cabinets, please see the following

URL: http://www.hp.com/go/rackandpower .

NOTE: The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).

Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

AF092A

AF094A


QuickSpecs

Additional Options


CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE: HP ProLiant DL rack models have fixed rails which provide support for racks with round mounting holes and tool-free support for racks with square mounting holes

(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of

26" - 36".

NOTE: Support for all 2 and 4 post Telco racks and threaded hole racks requires an additional option kit from Rack Solutions. The Rack Solutions brackets can be purchased at: www.hp.com/go/rackandpower .

HP Rack Options Keyboards and Monitors

HP USB BFR with PVC Free INDIA Keyboard/Mouse Kit

HP USB BFR with PVC Free AP-INTL Keyboard/Mouse Kit

HP USB BFR with PVC Free INTL Keyboard/Mouse Kit

HP USB BFR with PVC Free PORT Keyboard/Mouse Kit

HP USB BFR with PVC Free TURK Keyboard/Mouse Kit

HP USB BFR with PVC Free CZ Keyboard/Mouse Kit

HP USB BFR with PVC Free FIN Keyboard/Mouse Kit

HP USB BFR with PVC Free SWE Keyboard/Mouse Kit

HP USB BFR with PVC Free SWIS Keyboard/Mouse Kit

HP USB BFR with PVC Free KOR Keyboard/Mouse Kit

HP USB BFR with PVC Free US Keyboard/Mouse Kit

HP USB BFR with PVC Free UK Keyboard/Mouse Kit

HP USB BFR with PVC Free FR Keyboard/Mouse Kit

HP USB BFR with PVC Free ES Keyboard/Mouse Kit

HP USB BFR with PVC Free DE Keyboard/Mouse Kit

HP USB BFR with PVC Free JP Keyboard/Mouse Kit

HP USB BFR with PVC Free IT Keyboard/Mouse Kit

HP USB BFR with PVC Free CN Keyboard/Mouse Kit

HP USB BFR with PVC Free AE Keyboard/Mouse Kit

HP USB BFR with PVC Free RU Keyboard/Mouse Kit


(Worldwide)

HP KVM Switch Options

HP Server Console 0x2x8 Port Analog Switch

HP Server Console 0x2x16 Port Analog Switch

HP 1x4 Console Switch

HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software

HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software

HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software

672097-D63

672097-373

672097-B33

672097-133

672097-143

672097-223

672097-353

672097-103

672097-113

672097-KD3

631341-B21

631344-B21

631346-B21

631348-B21

631358-B21

631360-B21

631362-B21

631364-B21

638212-B21

638214-B21

AF616A

AF617A

AF618A

AF619A

AF620A


QuickSpecs

Additional Options




NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm .

AF621A

AF622A

HP USB and SD Options HP USB-P/S2 Mouse

HP USB 04 Standard Keyboard

HP DL165 G7 Secure Card Reader Module Option Kit

HP Internal USB Cable G6 Kit

HP Care Pack Services HP 3y 4h 24x7 DL16x ProCare Service

HP 3y 4h 24x7 DL16x Collab Support

HP 3y 4h 24x7 ProLiant DL14x/16x HW Supp

HP 3y Nbd DL16x ProCare Service

HP 3y Nbd DL16x Collab Support

HP 3y Nbd ProLiant DL14x/16x HW Supp

NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack .

DC369A

DT528A#ABA

592710-B21

536769-B21

U3A18E

U1J98E

U9510E

U3A12E

U1J92E

U9508E


QuickSpecs

Memory


HP ProLiant DL165 G7 (all models)

NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

NOTE: DDR3-1600MHz memory speed is only supported by 6200 series Opteron™ Processors.

Standard Memory

4 GB (2 x 2 GB) PC3-8500R DDR3 RDIMM memory, with Advanced ECC Capabilities memory installed.

Maximum Memory

Up to 384GB memory is available with the optional installation of PC3-12800-11 Registered DIMM memory kits.

Memory should be installed in pairs and matched for optimum performance.

Up to 256GB, using 2x8GB Dual-Rank and 1x16GB Quad-Rank PC3-8500R-7 DDR3 Registered (RDIMM) memory per memory channel, operating at 800MHz in 24 slots. (See memory section for population rules).

Up to 192GB, using 8GB PC3-10600R or PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when populated at 3

DIMMs per Channel in 24 slots.

Up to 64GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when populated at 2 DIMMs per Channel in

16 slots

DDR3 memory population guidelines

Some DIMM installation guidelines are summarized below:

For servers with twenty-four (24) memory slots:

There are four (4) channels per processor; eight (8) channels per server

There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots

Memory channel 1 consists of the three (3) DIMMs that are furthest from the processor

Memory channel 4 consists of the three (3) DIMMs that are closest to the processor

Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)

Do not install DIMMs if the corresponding processor is not installed

If only one processor is installed in a 2CPU system, only half of the DIMM slots are available

To maximize performance, balance the total memory capacity between all installed processors

It is not required, but it is recommended to load the channels similarly if possible

You can only have up to eight (8) ranks installed per channel

Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities

If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor

If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz

If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz

If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz

References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc

You can only install one quad-rank DIMMs per channel and it must be in the center socket

You can only install two UDIMMs per channel; if available, the second (or middle) slot in the channel must remain empty

Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel

Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset


QuickSpecs


Memory

DIMM Type Registered DIMMS (RDIMMs)

Unbuffered with

ECC DIMMs

(UDIMMs)

Quad

Rank

(4R) Dual Rank (2R) DIMM Rank

DIMM Capacity

DIMM Native Speed (MHz)

Voltage

SLOTS THAT CAN BE POPULATED

24 slot servers

MAXIMUM CAPACITY (GB)

24 slot servers

4GB

1333

LV/Std

24

96

Single Rank

4GB

1600

Std

24

96

8GB

1600

Std

24

192

2GB

1333

Std

24

48

Dual Rank (2R)

8GB

1333

LV/Std

24

192

16GB

1333

LV/Std

24

384

16GB

1600

Std

24

384

16GB

1066

Std

8

256 *

2GB

1333

Std

16

32

4GB

1333

Std

16

64

POPULATED DIMM SPEED (MHz)

1 DIMM Per Channel

2 DIMM Per Channel

3 DIMM Per Channel

1066/

1333 **

1066/

1333 **

1066/

1333 **

1600 1600 1333 1066/

1333 **

1333 1333 1333 1066/

1333 **

1333

1333

1066 1066 1066 1066 800/

1066 **

1600

1333

1066

* This capacity is achieved by loading 1 16GB in center socket and remaining sockets with 8GB DIMMs.

** 3DPC: LV runs at 800/Std voltage runs at 1066

1066 n/a n/a

1333

1333 n/a

1333

1333 n/a

DIMM slot and configuration diagrams

Basic memory slot & population diagram

Chnl 1

Chnl 2

Chnl 3

Population order; start with "A" first, "B" second, "C" third, etc.

slot #

3

1

2

4

5

6

7

8

9

24 DIMM SLOTS (12 per CPU node)

CPU1 population order

E

I

A

F

B

J

G

C

K

9

7

8

6

4

5 slot #

3

1

2

CPU2 population order

Chnl 1

G

C

K

E

I

A

Chnl 2

Chnl 3

F

B

J


QuickSpecs


Memory

Chnl 4 10

11

12

D

L

H

NOTE: Capacity references are rounded to the common Gigabyte values.

2GB = 2048MB

4GB = 4096MB

8GB = 8192MB

16GB = 16384MB

10

11

12

DDR3 memory options part number decoder

D

L

H

Chnl 4

Following are memory options available from HP:

HP Memory Registered DIMMs (RDIMMs)





Memory Kit




Memory Kit



Memory Kit


Kit



593907-B21

676331-B21

593911-B21

604500-B21

676333-B21

593913-B21

604502-B21

593915-B21

627808-B21

684066-B21

593921-B21


QuickSpecs

Memory




593923-B21


QuickSpecs

Storage


1-4 Hot plug 3.5" SATA or Hot-plug SAS/SATA hard drive bays

A Optional DVD-ROM, or DVD/CD RW

1-8 Eight Hot-plug SAS hard drive bays

A Optional DVD-ROM, or DVD RW

Drive Support

Removable Media

DVD-ROM

DVD RW

Quantity

Supported

Up to 1

Up to 1

Position

Supported Controller

A

A

Integrated IDE (ATAPI) (optional)

Integrated IDE (ATAPI) (optional)

Hard Drives



SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives

Quantity

Supported

Position


1TB 3G SATA 7.2K

500GB SATA 7.2K

Up to 4 1-4 HP Smart Array P212 Controller

HP Smart Array P410 Controller



Quantity

Supported

Position


3TB 3G SATA 7.2K

2TB 3G SATA 7.2K

1TB 3G SATA 7.2K

500GB 3GSATA 7.2K




SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

Quantity

Supported

Up to 4 3TB 3G SATA 7.2K

2TB 3G SATA 7.2K

1TB 3G SATA 7.2K

500GB 3G SATA 7.2K

Position


1-4 HP Smart Array P212 Controller




QuickSpecs

Storage


SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives

Quantity

Supported

Position


250GB 3G SATA 7.2K





Quantity

Supported

Position


250GB 3G SATA 7.2K





Quantity

Supported

Up to 8 400GB 3G SATA MLC SFF

SSD

200GB 3G SATA MLC SFF

SSD

100GB 3G SATA MLC SFF

SSD

Position





SATA Hot Plug 3.5" Midline (MDL) Solid State Drives

Quantity

Supported

Up to 4 400GB 3G SATA MLC LFF

SSD

200GB 3G SATA MLC LFF

SSD

100GB 3G SATA MLC LFF

SSD

Position





SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

Quantity

Supported

Position


1.0TB 6G SAS 7.2K

500GB 6G SAS 7.2K




SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives


QuickSpecs

Storage

3TB 6G SAS 7.2K

2TB 6G SAS 7.2K

1TB 6G SAS 7.2K

Quantity

Supported

Up to 4


Position





SAS Hot Plug SFF(2.5-inch) Enterprise (ENT) Drives

Quantity

Supported

Up to 8 900GB 6G SAS 10K

600GB 6G SAS 10K

450GB 6G SAS 10K

300GB 6G SAS 15K

300GB 6G SAS 10K

146GB 6G SAS 15K

Position





SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

Quantity

Supported

Up to 4 600GB 6G SAS 15K

450GB 6G SAS 15K

300GB 6G SAS 15K

Position





6G SAS Hot Plug Enterprise Performance Solid State Drives

Quantity

Supported

Position


400GB 6G SAS SLC

200GB 6G SAS SLC




6G SAS Hot Plug Enterprise Mainstream Solid State Drives

Quantity

Supported

Position


800GB 6G SAS MLC

400GB 6G SAS MLC 200GB

6G SAS MLC




Tape and Disk Backup

NOTE: For the complete range of tape drives, autoloaders, libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape . For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP disk and tape backup products see: http://www.hp.com/storage/SPOCK .

Position Recommended Controller Part Number


QuickSpecs

Storage

HP SCSI Tape Drives

LTO-1 Ultrium 232

LTO-2 Ultrium 448

LTO-3 Ultrium 920

LTO-3 Ultrium 960

LTO4 Ultrium 1760

LTO-4 Ultrium 1840

DAT 40

DAT 72

DAT 160

1U Rack-Mount Kit

3U Rack-Mount Kit

HP USB Tape Drives

DAT 40

DAT 72

DAT 160

DAT 320

1U USB Rack-Mount Kit

HP SAS Tape Drives

DAT 160

DAT 320

LTO-2 Ultrium 448

LTO-3 Ultrium 920

LTO-4 Ultrium 1760

LTO-4 Ultrium 1840

LTO-5 Ultrium 3000

LTO-5 Ultrium 3280

1U Rack-Mount Kit

3U Rack-Mount Kit

HP SCSI Tape Autoloaders

DAT 72x10 Autoloader

1/8 G2 Autoloader

HP SCSI Tape Libraries

MSL2024

MSL4048

MSL8096

MSL6000

HP SAS Tape Autoloaders and Libraries

1/8 G2 Autoloader

MSL2024

MSL4048

MSL8096

External

External

External

External

External

External


HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter

USB 2.0 Port

HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS

Controller

HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter

HP U320e SCSI Dual Channel Host Bus Adapter

HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS

Controller

412911-B21

N/A

462828-B21

412911-B21

AH627A

462828-B21


QuickSpecs

Storage

HP Fibre Channel Tape

Libraries

MSL2024

MSL4048

MSL8096

MSL6000

HP USB RDX Removable

Disk Backup System

RDX160

RDX320

RDX500

RDX750

HP D2D Backup Systems, iSCSI

D2D2500i

D2D4000i

HP D2D Backup Systems,

Fibre Channel

D2D4000fc

External

External

External

External

USB 2.0 port


Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for connectivity information and the supported Fibre Channel HBAs shown in this QuickSpecs.

Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

Direct server attach is not supported, requires connection via SAN fabric. See: http://www.hp.com/storage/SPOCK

N/A


QuickSpecs

Power Specifications


HP 500W Factory Integrated Power Supply Kit

Part Number

Input Voltage Range (Vrms)

Frequency Range (Nominal) (Hz)

Nominal Input Voltage (Vrms)

Maximum Rated Output Wattage

Nominal Input Current (A rms)

Max Rated Input Wattage Rating (Watts)

Max. Rated VA (Volt-Amp)

Efficiency (%) at Max. Rated Output Wattage

Power Factor

Leakage Current (mA)

Max. Inrush Current (A peak)

Max. Inrush Current duration (mS)

Maximum British Thermal Unit Rating (BTU-Hr)

515915-B21

100 to 240

47/63

100

500

5.74

568

574

88

0.99

0.42

30

20

120

500

4.99

568

574

88

0.99

0.50

30

20

HP 750W Common Slot Gold Hot Plug Factory Integrated Power Supply Kit with Backplane

Part Number

Input Voltage Range (Vrms)

535683-B21

100 to 240

Frequency Range (Nominal) (Hz) 50/60

Nominal Input Voltage (Vrms)

Maximum Rated Output Wattage Rating

Nominal Input Current (A rms)

Maximum Rated Input Wattage Rating (Watts)

Maximum Rated VA (Volt-Amp)

Efficiency (%)

Power Factor

Leakage Current (mA)

Maximum Inrush Current (A peak)

Maximum Inrush Current duration (mS)

Maximum British Thermal Unit Rating (BTU-Hr)

100

750

8.9

857

894

87.5

0.42

2925

120

750

7.4

847

884

88.5

0.50

2892

200

750

4.3

824

859

91

0.83

2812

208

750

4.1

825

854

91

0.97

0.87

30

20

2812

200

500

2.86

562

573

89

0.98

0.81

30

20

220

500

2.58

556

567

90

0.98

0.91

30

20

220

750

3.9

820

854

91.5

0.92

230

500

2.46

556

567

90

0.98

0.95

30

20

230

750

3.7

820

854

91.5

0.96

240

750

3.6

820

854

91.5

1.00

2797 2797 2797

NOTE:

To review typical system power ratings use the Active Answers Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor

240

500

2.36

556

567

90

0.98

1.00

30

20


QuickSpecs

System Specifications


Power

ProLiant DL165 G7 Fully Configured

Fully Loaded System Input Wattage (W)

Fully Loaded System Input Current (A rms)

Fully Loaded System Thermal (BTU- Hr)

115V/60Hz

568

4.99

1939.15

220V/50Hz

556

2.58

1898.18

Fully Loaded System VA (Volt-Amp) 574

System Inrush Current with all power supplies loaded (A) 30

Power cord requirements Nema 5-15P to IEC320-C13 IEC320-C13 to IEC320-C14

NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI cards.

Power Cord AF556A

567

30

Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard

NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord

(416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord must be ordered separately.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix .


QuickSpecs

Technical Specifications

System Unit


Dimensions

(H x W x D)

(with bezel)

Weight

(approximate)

Input Requirements

(per 500W power supply)

BTU Rating

Power Specifications

1.70 x 17.64 x 27.59 in (4.32 x 44.80 x 69.95 cm)

Maximum

(all hard drives, power supplies, and processors installed)

Minimum

(one hard drive, power supply, and processor installed)

Rated Line Voltage

32.08 lb (14.55 kg)

27.4 lb (12.43 kg)

Rated Input Current

Rated Input Frequency

Rated Input Power

100 to 127 VAC

200 to 240 VAC

4.99A (at 115 VAC), 2.46A (at 230 VAC)

47 to 63 Hz

574W (at 100 VAC)

573W (at 200 VAC)

Maximum 500W 1700 BTU / hr (at 100

VAC)

1700 BTU/hr (at 200

VAC)

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/hppoweradvisor

Power Supply Output

(per power supply)

- Click on the system of interest. Example: DL165 G7

- Follow the instructions of the next screens.

Rated Steady-State Power 500 Watts (at 100 VAC),

500 Watts (at 200 VAC)

Maximum Peak Power 500 Watts (at 100 VAC),

500 Watts (at 200 VAC)

Optional High Efficiency Power Supply Specifications

Input Requirements

(per power supply)

Rated Line Voltage 90-110 VAC,

108-132 VAC

180-264VAC

Rated Input Current

BTU Rating

Rated Input Frequency

Rated Input Power

Maximum

7.4 A (at 115 VAC),

3.6 A (at 230 VAC)

47 to 63 Hz

846 W (at 115 VAC),

822W (at 230 VAC)

750 W 2550 BTU/hr (at 100

VAC),

2550 BTU/hr (at 200

VAC)


QuickSpecs


Power Specifications


To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energyefficient

Power Supply Output

(per power supply)

System Inlet

Temperature

Relative Humidity

(non-condensing)

Altitude

Acoustic Noise

Emissions Classification

(EMC)

- Click on the system of interest. Example: DL165 G7

- Follow the instructions of the next screens.

Rated Steady-State Power 750 W (at 100 VAC),

750W (at 200 VAC)

Maximum Peak Power 750 W (at 100 VAC),

750 W (at 200 VAC)

Operating

Non-operating

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr

(18°F/hr). The upper limit may be limited by the type and number of options installed.

System performance may be reduced if operating with a fan fault or above 30°C (86°F).

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

Operating

Non-operating

Operating

Non-operating

10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, noncondensing.

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, noncondensing.

3050 m (10,000 ft). This value may be limited by the type and number of options installed.

Maximum allowable altitude change rate is 609 m/min (2000 ft/min).

9144 m (30,000 ft). Maximum allowable altitude change rate is 609 m/min (2000 ft/min).

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

Idle

LWAd

LpAm

Operating

LWAd

LpAm

FCC Rating

6.03 B

46.1 dBA

6.08 B

46.4 dBA

Class A


QuickSpecs


(EMC)


Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;

ICES-003; CNS13438; GB9254; K22;K24; EN

61000-3-2; EN 61000-3-3; EN 60950-1; IEC

60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

HP B110i Smart Array

Controller

Drives Supported

Channels

Storage Capacity

Data Transfer Method

Up to 4 SATA devices

4 1.5Gb SATA

3.0TB internal storage

Maximum SATA Channel

Transfer Rate

Maximum Transfer Rate

per PCI Bus (peak)

32-bit/33-MHz PCI bus-master

1.5Gb/s per channel

266 MB/s per channel

Protocols SATA

PIO Mode[0-4]

SATA Cable

Internal ATA Connectors Four SATA connectors

NOTE: Raid support requires optional slot based raid controller.

Smart Array P410/410i

Controller

Disk Drive and Enclosure

Interface

SAS Connectors

Cache Memory Speed

Server Interface

6Gb/s SAS (Serial Attached SCSI)

3Gb/s SATA (Serial ATA)

2 internal (Mini-SAS) x8 wide port connectors

DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth.

x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth

SAS Speed

Cache Memory x8 6Gb/s SAS provides 4.8GB/s maximum bandwidth

40-bit 256MB ECC protected cache (72-bit 512MB BBWC module upgrades available); transportable with battery-backed upgrade

Logical Drives Supported Up to 64 logical drives

Host Memory Addressing 64-bit, supporting greater than 4GB server memory space

RAID Support RAID 6, 6+0 (Advanced Data Guarding)

NOTE: The minimum of 256 MB cache, battery kit, and Smart Array Advanced

Pack License Key upgrade is required to enable RAID 6, 6+0

RAID 5, 5+0 (Distributed Data Guarding)

NOTE: The 256 MB is required to enable RAID 5, 5+0 support of the Smart

Array P410i

RAID 1+0 (Striping & Mirroring)

RAID 0 (Striping)


QuickSpecs



(2x) NC362i Integrated

Dual Port Gigabit Server

Adapter

Network Interface

Data Transfer Method

Controller

Integrated 10/100/1000BASE-T Transceiver

Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller

(MAC) with a triple-speed Ethernet transceiver.

Compliant to x1 PCIe Specification

Intel® 82576

Network Transfer Rate 10Base-T (Half-Duplex)

10Base-T (Full-Duplex)

100Base-TX (Half-Duplex)

100Base-TX (Full-Duplex)

Connector

1000Base-TX (Half and Full-Duplex)

RJ-45 connector

Cable Support Performs all the physical layer functions for 10BASE-T, 100BASE-T, and

1000BASE-T Ethemet on standard Category 5 UTP

Environment-friendly

Products and Approach

End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.

Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities.

This information (product disassembly instructions) is posted on the Hewlett

Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2012 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. AMD, Opteron, and Hyper-Transport are trademarks of AMD Corporation in the United States and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.


QuickSpecs HP ProLiant DL165 Generation 7 (G7) Overview

What's New

Cold Plug/Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

Step 1: Base Configuration

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Step 3: Choose Additional Factory Integratable Options

Step 4: Choose Additional Options for Factory Integration

Drive Support

Related manuals

Table of contents

QuickSpecs HP ProLiant DL165 Generation 7 (G7) Overview

What's New

Cold Plug/Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

Step 1: Base Configuration

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Step 3: Choose Additional Factory Integratable Options

Step 4: Choose Additional Options for Factory Integration

Drive Support

Related manuals

HP

590259-421

Hewlett Packard Enterprise

663807-001

HP

464208-421

Hewlett Packard Enterprise

663807-421

Table of contents