ACTi Standalone NVR

ACTi Standalone NVR
ENR-1000 / 1100 / 1200 / 2000
Release Notes
Version 3.02.00
2013/07/11
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
Legal Notice
Disclaimer
 The information contained in this document is intended for general information purposes.
ACTi Corporation shall not be liable for errors contained herein or for incidental or
consequential damages arising from the furnishing, performance, or use of this document.
 The information contained herein is subject to change without notice.
Copyright
Copyright © 2003-2013 ACTi Corporation All Rights Reserved.
2
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
Contents
1 Firmware Version
4
New Features ................................................................................. 4
Issue Solved .................................................................................. 5
Removed ........................................................................................ 5
Remark .......................................................................................... 5
Supported languages ..................................................................... 6
Supported camera models ............................................................. 6
2 Firmware Upgrade
7
3 Download and Documentation
9
4 Support
9
3
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
Firmware Version
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: ENR-010-V3.02.00-AC
Release Date: 2013.07.11
New Features
1. (v3.02.00) Compatible with Active Mobile Client (iOS) v1.0.
2. (v3.02.00) Added Video Adjustment settings (Brightness, Contrast,
Saturation, Hue and Line Frequency) if the camera supported these
attributes.
3. (v3.02.00) Supported third-party cameras.
4. (v3.02.00) Added new language – Norwegian
5. (v3.02.00) Supported HDD S.M.A.R.T.
6. (v3.01.01) Supported motion detection setting
7. (v3.01.01) Supported remote viewer app – Active Mobile Client (iOS
version)
8. (v3.01.01) Added new languages – Portuguese, Turkish, Polish and
Thai
9. (v3.01.01) Added PPPoE network connection
10. (v3.01.01) Supported Dynamic DNS function and provided three DDNS
service providers (DynDNS, No-IP and ZoneEdit)
11. (v3.01.01) Supported UPnP function
12. (v3.01.01) Added DHCP server function on LAN2.
(LAN1 port is DHCP server and LAN2 port is DHCP client by default)
13. (v3.00.00) Supported TCD series video encoders
14. (v2.01.00) Multiple languages supported.
Czech, English, French, Italian, Japanese, Russian, Spanish,
Simplified Chinese and Traditional Chinese.
15. (v2.01.00) Digital PTZ function supported
4
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
16. (v2.01.00) Added Camera list, Event list and PTZ controller in Live View
screen.
Enhancement
1.
(v3.00.00) User can add MPEG4/MJPEG camera manually. (Auto Add
camera function will accept H.264 only.)
Issue Solved
1. (v3.02.00) Detected 50 Hz & 60 Hz video output monitor automatically.
2. (v3.01.01) Fixed black screen in AVI reported from IE remote site for
higher resolution (2592 x 1944, 2048 x 1536).
3. (v3.01.01) Fail to export Russian language translation file from local
screen, hence user need to export the ru.json from IE remote site.
Removed
1. (v3.02.00) Removed ZoneEdit from DDNS service provider list
Remark
1. The new IP Utility v4.2 will be able to find the ENR models remotely.
2. ENR can assign DHCP IP address automatically for cameras within
LAN via LAN1 port. For this DHCP server feature, please power on
ENR completely first, then boot up cameras.
3. Please make sure IP cameras and ENR are connected to the same
network before performing Auto Add cameras operation.
4. Language file must be UTF-8 encoding type.
5. Motion detection setting is not available when camera is in ePTZ stream
mode or channel ID 2 in dual stream mode.
6. ENR will display I frame live view on local display unless the live layout
contents only 1-8 channels with 1280x720 or 640x480 video resolution.
7. Not support Video Loss events from the video servers
8. Not support "MD Preset” stream mode
9. Please connect monitor before you power on the ENR server.
5
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
Supported languages
Czech, English, French, Italian, Japanese, Norwegian, Polish, Portuguese,
Russian, Spanish, Thai, Turkish, Simplified Chinese and Traditional
Chinese.
Supported camera models
ACTi TCM/ TCD/ KCM/ D/ E/ B/ I series
For supported non-ACTi cameras list, please refer to
http://www.acti.com/3rdpartycamera
6
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
Firmware Upgrade
ENR standalone NVR can be upgraded firmware from local display screen or
remote IE browser.
The following steps are firmware upgrade procedure via local display on ENR.
You may check ACTi corporate website for latest ENR firmware package and
download it. Unzip the package and save the *.upg file to a USB disk and Insert
it into ENR USB port.
Please note that the USB disk carrying the firmware image should at least
have 200 MB free space.
Please follow the steps to upgrade the firmware image to V3.02.00 via local
display screen.
Step 1: Power on the ENR server.
Step 2: Unzip the “ENR-010-V3.02.00-AC.zip” and save the file.
“ENR-010-V3.02.00-AC.upg” in the root folder of USB disk and then
insert it into ENR USB port.
System Log is recorded the activities performed by logged-in Users.
ENR will not keep original System Log after firmware upgrade. If you
want to keep the log, please back up settings before firmware upgrade.
Step 4: Log in the ENR with Administrator account via local display.
On Live screen, click “Setup”  click “Maintenance” tab  select
“Firmware Upgrade”.
7
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
1
2
Step 4: The drop down list will show the detected image file
“ENR-010-V3.02.00-AC.upg”.
Step 5: After click “Upgrade” and confirm the system prompts, ENR will start
the upgrade process.
During upgrading, the system will
stop every other activity including
recording and event handling.
Please be noted that after upgrading has started, DO NOT cut off the
system power or eject the USB disk until ENR restarts.
Step 6: The device needs 5 minutes for firmware upgrading, and the system
will auto-restart and keep the previous ENR settings after the
upgrading completes.
You may check the current firmware version on “Setup”  click
“System” tab  select “Information”.
8
www.acti.com
Release Notes
Product: ENR-1000, ENR-1100, ENR-1200, ENR-2000
Firmware Version: v3.02.00
Release Date: 2013.07.11 Reviewed Date: 2013.07.17
Download and Documentation
You may check ENR products in “Standalone NVR” section on ACTi corporate
website for updates or release information about this firmware and documents.
For ENR related utilities, please check the “ACTi Utility”
http://www.acti.com/Utility
Support
If you have any question or need additional assistance, please feel free to
contact our engineers via our Customer Help Desk platform
http://www.acti.com/CHD
9
www.acti.com