advertisement
Quick Installation Guide
TEG-PCITXR
Español .....................................................................................................
1. Antes de iniciar ..................................................................................
2. Cómo se instala ................................................................................
1
1
2
Troubleshooting ........................................................................................
4
Version 08.08.2007
1. Antes de iniciar
Requisitos del sistema
Contenidos del paquete
TEG-PCITXR
Guía de instalación rápida
CD-ROM del controlador
Aplicación
Workstations with 10/100/1000Mbps
Gigabit PCI Adapter
(TEG-PCITXR)
5-Port 10/100/1000Mbps
Gigabit Switch
(TEG-S5)
Cable/DSL 4-Port
Firewall Router
(TW100-BRF114)
Internet
Cable/DSL
Modem
10/100Mbps
Multi-Port Print Server
(TE100-P21)
Printers
1
Español
2. Cómo se instala
1. Inserte el CD-ROM del
controlador en la unidad de CD de su ordenador, haga clic en
Instalar Controlador (Install
Driver).
2. Siga las instrucciones del
Asistente InstallShield
(InstallShield Wizard) y a continuación haga clic en
Terminar (Finish).
3. Apaque su PC y luego abra la caja de su PC.
4. Introduzca la tarjeta PCI de manera firme en la ranura para tarjeta PCI disponible, después
ENCIENDA el PC y espere hasta que aparezca el escritorio de
Windows.
2
Español
5. Conecte un cable de red RJ-45 del PC a un puerto Ethernet disponible en su enrutador o conmutador.
La instalación ha sido completada
Registre su producto
Para asegurar los más altos niveles de servicio y apoyo al cliente, registre su producto en línea en: www.trendnet.com/register
Gracias por elegir TRENDnet
3
Español
Troubleshooting
Q1: Windows is unable to recognize my hardware. What should I do?
A1: First, verify that your computer meets the system requirements as specified in
Section 1. Second, go to Start -> Control Panel -> System -> Hardware >
Device Manager. In the list of device types, double-click on Network Adapters.
If you see the device with a yellow question mark or exclamation point next to it, double-click on it, click on Drivers and click Update Drivers. Follow the
Hardware Update Wizard instructions as illustrated in Section 2. Third, if the device manager fails to recognize the presence of a new network adapter, verify that the network adapter is firmly seated in the PCI Slot.
Q2: Windows recognizes my new hardware, but I'm unable to connect to my network. What should I do?
A2: First, verify that the RJ-45 Ethernet Cable is securely connected from your switch or router to your network adapter. Second, verify that the LEDs on your network card are lit. Third, verify that the TCP/IP settings are set to Obtain an IP
address automatically.
Q3: How do I install the drivers on Windows 98 or ME?
A3: Please refer to the User's Guide included on the Driver CD-ROM.
Q4: Why am I only getting a network connection speed of 100Mbps instead of
1000Mbps?
A4: First, check the Ethernet Cable. Make sure you are using CAT-5e or CAT-6
Ethernet Cables. Some CAT-5 cables are not rated to run in Gigabit. Second, check the switch to make sure it is a 1000Mbps switch.
If you still encounter problems or have any questions regarding the TEG-PCITXR, please contact Trendnet's Technical Support Department.
4
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired operation.
Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.
TRENDnet Technical Support
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
Europe .
.
.
.
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2007. All Rights Reserved. TRENDnet.
advertisement
Related manuals
advertisement