advertisement
Ericsson RX8200
Advanced Modular Receiver
Broadcasters' requirements for differing equipment configurations and the many and varied ways in which receivers are used is driving the need for a flexible receiver platform. The Ericsson RX8200 Advanced
Modular Receiver has been designed to precisely meet these requirements.
By allowing each individual RX8200 to be configured and tailored to the user’s precise needs the perfect balance of functionality and cost can be achieved, resulting in a unit having only the required features without the additional expense of superfluous connectivity or functionality.
The RX8200 offers a vast and sophisticated array of configuration possibilities allowing it to cover a broad range of applications. The RX8200 can be tailored to standard definition or high definition uses with
MPEG-2 or MPEG-4 decode technology in both 4:2:0 and 4:2:2 modes while connectivity into the receiver is achieved with DVB-S2 satellite, IP, ATM and ASI options.
The high powered processing capabilities of the RX8200 enable the unit to be simply and easily upgraded in the field with additional software options to increment the functionality at any point after initial installation.
PRODUCT OVERVIEW
A New Receiver With an Unrivalled Pedigree
The RX8200 Advanced Modular Receiver is Ericsson’s fourth generation receiver that builds on the success and knowledge of previous generations of products to ensure an unrivalled level of quality and reliability.
Increased Distribution Capacity and Efficiency
The RX8200 Advanced Modular Receiver, in combination with
Ericsson’s MPEG-4 AVC Encoders and DVB-S2 PREKOR™ Satellite
Modulators achieves a level of bandwidth efficiency that is unrivalled allowing more HD services per transponder compared with any competing solution.
Wide Choice of Inputs and Outputs for Enhanced Connectivity
The RX8200 can be integrated into a variety of system architectures, including ASI, IP and satellite delivery systems through a choice of input and output modules. The receiver offers a multitude of IP, audio and video outputs for high quality delivery to all major onward networks.
Simplified Control and Lower Cost of Operations
Organizations with large populations of RX8200 Advanced Modular
Receivers or other Ericsson receivers can simplify control by integrating with the Director by Ericsson control system. Director provides remote, over-air, single-view control from a central location, reducing the need for on-site local operators.
BASE UNIT FEATURES
RX8200 – Advanced Modular Receiver
(RX8200/BAS, FAZ 101 0113/1)
The following features are available as standard:
1x ASI input transport stream input
Front panel control
Web browser and SNMP remote control
Alarm relay and SCTE 35 controlled contact closures for ad-insertion signaling
Many sophisticated, additional hardware and software based modules available as options
RX8200 – Advanced Modular Receiver
(RX8200/BAS/2, FAZ 101 0113/2)
Functionality as above with the addition of:
Base unit includes MPEG-2 and MPEG-4 4:2:2 decoder card
(functionality enabled via additional license keys)
03-2011-v3
Ericsson RX8200 Advanced Modular Receiver
CONFIGURATION PHILOSOPHY
The RX8200 Advanced Modular Receiver offers ultimate configurability at the point of order allowing the unit to be tailored to your precise needs incorporating just the functionality you require thus allowing an individual and optimal balance of price against functionality.
To configure your individual receiver follow this simple configuration philosophy to allow easy selection of all the features that you require.
INPUT OPTIONS
The RX8200 Advanced Modular Receiver has a single ASI input as standard and can be configured with one additional choice of inputs type.
Satellite Input options
The RX8200 satellite input modules come with DVB-S QPSK support as standard. The unit can optionally be licensed to support the new highly efficient DVB-S2 satellite transmission standard.
DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2, FAZ 101 0113/5)
4x L-band inputs
DVB-S QPSK demodulation
DVB-S2 QPSK, 8PSK demodulation with license keys
Second Generation DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2/2, FAZ 101 0113/6)*
4x L-band inputs
DVB-S QPSK demodulation
DVB-S2 QPSK, 8PSK, 16APSK demodulation with license keys
DVB-S2 multi-transport stream capability with license key
DVB-S2 QPSK License
(RX82XX/SWO/DVBS2/QPSK, FAZ 101 0113/32)
Adds DVB-S2 QPSK capability to DVB-S2 input option card
DVB-S2 8PSK License
(RX82XX/SWO/DVBS2/8PSK, FAZ 101 0113/30)
Adds DVB-S2 QPSK, 8PSK capability to DVB-S2 input option card
DVB-S2 16APSK License
(RX82XX/SWO/DVBS2/16APSK, FAZ 101 0113/29)
Adds DVB-S2 QPSK, 8PSK and 16APSK capability to DVB-S2 input option card
Second generation DVB-S2 card (RX8200/HWO/DVBS2/2, FAZ 101
0113/6) only
DVB-S2 VCM License (RX82XX/SWO/DVBS2/VCM, FAZ 101 0113/56)
Provides DVB-S2 Multi-transport stream input capability
Single transport stream output from receiver
Second generation DVB-S2 card (RX8200/HWO/DVBS2/2, FAZ 101
0113/6) only
DVB-S2 Low Symbol Rate License
(RX82XX/SWO/DVBS2/LSYM, FAZ 101 0113/31)
Enables DVB-S2 symbol rate of 1 Msym/s to 5 Msym/s
IP Transport Stream Input Options
The RX8200 may be configured with IP transport stream input connectivity via the following options.
100/1000BaseT Input (RX8200/HWO/IP/GIGE, FAZ 101 0113/12)
MPEG transport stream over IP
2x 100/1000BaseT input
Very low latency
SMPTE 2022 Pro-MPEG FEC License
(RX8200/SWO/IP/PROMPEG, FAZ 101 0113/37)
Enables SMPTE 2022 Pro-MPEG FEC capability for the IP input card
Requires IP input card
G.703 ATM Input Option
The RX8200 may be configured with G.703 ATM connectivity.
G703 ATM Input (RX8200/HWO/G703, FAZ 101 0113/8)
E3 or DS-3 inputs
34 Mbps or 45 Mbps rates
Input Redundancy
The RX8200 Advanced Modular Receiver offers as standard automatic redundancy switching between ASI input and the additional input option.
This redundancy switching capability may be further enhanced with the following option.
Null Packet Detection Redundancy Switching
(RX82XX/SWO/NULL, FAZ 101 0113/48)
Redundancy switching from primary to secondary input triggered by presence of null packets in the incoming stream
User definable percent of null packets to trigger redundancy switch
03-2011-v3
VIDEO AND TRANSPORT STREAM OUTPUT
OPTIONS
The RX8200 Advanced Modular Receiver offers the option of an SD only or HD and SD capable video output card. Both video output card options also provide ASI transport stream output connectivity. IP transport stream output capability may additionally be specified.
SD Video and ASI Output (RX8200/HWO/SD, FAZ 101 0113/18)
2x composite video outputs
2x switchable ASI/SDI outputs
3 Gbps HD and SD Video and ASI Output
(RX8200/HWO/HD/3G, FAZ 101 0113/10)
1x composite video output
1x RGB/YPrPb analog video output
3x switchable ASI/SDI/HD-SDI outputs
3 Gbps HD-SDI output compatible with MPEG-4 4:2:2 1080p50/60 capability
IP Transport Stream Output (RX8200/HWO/IP/OUT, FAZ 101 0113/14)
Encapsulation of transport stream output into IP multicast
MPTS or single SPTS output stream with licence key
2x Gigabit Ethernet RJ-45 interfaces capability
CONDITIONAL ACCESS OPTIONS
The RX8200 Advanced Modular Receiver supports many types of widely used conditional access systems to allow for secure transmission of content. By default the RX8200 is fitted with the capability to accept a
Conditional Access Module. Alternatively the RX8200 may be ordered with the capability to directly accept NDS BSkyB CA smart cards.
Director by Ericsson (RX8200/SWO/DIR, FAZ 101 0113/27)
Director CA
Director over-air control
Director over-air software downloads
Director by Ericsson Multi-service Decryption
(RX8200/SWO/DIR5/MSD, FAZ 101 0113/28)
Multi-service decryption for Director by Ericsson
DVB Common Interface (RX8200/SWO/CI, FAZ 101 0113/25)
Enables support for Conditional Access modules
DVB Common Interface Multi-service Decryption
(RX8200/SWO/MSD, FAZ 101 0113/46)
Multi-service decryption DVB Common Interface
BISS CA (RX8200/SWO/BISS, FAZ 101 0113/23)
BISS Mode 1 and BISS Mode E descrambling
BISS Multi-service CA (RX8200/SWO/BISS/MSD, FAZ 101 0113/24)
Multi-service decryption for BISS
NDS BSkyB CA (RX8200/HWO/BSKYB, FAZ 101 0113/4)
Single service decryption for BSkyB services
Mutually exclusive with other CA types
Ericsson RAS CA (RX8200/SWO/RAS, FAZ 101 0113/52)
Ericsson RAS 1
Ericsson Signal Protection CA (RX8200/SWO/SP, FAZ 101 0113/58)
Ericsson Signal Protection CA
Ericsson RX8200 Advanced Modular Receiver
SECURITY OPTIONS
Password Protection of Web Browser
(RX8200/SWO/PW, FAZ 101 0113/51)
Protects Web browser from malicious or accidental changes
STREAM PROCESSING OPTIONS
The RX8200 Advanced Modular Receiver offers as sophisticated choice of transport stream processing capability allowing the unit to operate as a cost effective network interface into a headend or transport stream turn-around system
Single Service Filtering
(RX8200/SWO/SING/SERVFILT, FAZ 101 0113/53)
Filter multiple services to output a single service
Re-map PIDs for the outgoing service
Multi-Service Filtering
(RX8200/SWO/MULT/SERVFILT, FAZ 101 0113/47)
Filter N multiple incoming services to M outgoing services
Re-map PIDs for a single service
CBR MPTS transport stream output
Service splitting for multiple IP SPTS output
VIDEO DECODING OPTIONS
The RX8200 Advanced Modular Receiver provides capability to decode every video compression standard in use today including support for the highest quality MPEG-4 AVC 4:2:2 standard.
In order to offer ultimate cost effectiveness and flexibility 4:2:2 and 4:2:0 video standards are ordered separately.
4:2:0 Decode Options
MPEG-2 SD 4:2:0 Decoding
(RX8200/SWO/MPEG2/SD, FAZ 101 0113/45)
Enables MPEG-2 SD 4:2:0 decoding
MPEG-2 HD 4:2:0 Decoding
(RX8200/SWO/MPEG2/HD, FAZ 101 0113/44)
Enables MPEG-2 SD and HD 4:2:0 decoding
MPEG-4 AVC SD 4:2:0 Decoding
(RX8200/SWO/MP2/MP4/SD, FAZ 101 0113/40)
Enables MPEG-2 and MPEG-4 AVC SD 4:2:0 video decoding
MPEG-4 AVC HD 4:2:0 Decoding
(RX8200/SWO/MP2/MP4/SD/HD, FAZ 101 0113/41)
Enables MPEG-2 SD and HD, MPEG-4 AVC SD and HD 4:2:0 decoding
03-2011-v3
4:2:2 Decode Options
MPEG-2 4:2:2 Decoding Hardware
(RX8200/HWO/MP2/422, FAZ 101 0113/15)
Dormant hardware for MPEG-2 4:2:2 decoding
Enable MPEG-2 4:2:2 decoding with additional options
MPEG-2 SD 4:2:2 Decoding
(RX8200/SWO/MP2/422/SD, FAZ 101 0113/59)
Enables MPEG-2 SD 4:2:2 decoding
Requires MPEG-2 4:2:2 only hardware or MPEG-2 & 4 4:2:2 hardware
(RX8200/BAS/2, FAZ 101 0113/2)
MPEG-2 HD 4:2:2 Decoding
(RX8200/SWO/MP2/HD/422, FAZ 101 0113/39)
Enables MPEG-2 HD 4:2:2 decoding
Requires MPEG-2 SD 4:2:2 decoding option
MPEG-2 and MPEG-4 AVC SD 4:2:2 Decoding
(RX8200/SWO/MP4/422/SD, FAZ 101 0113/43)
Enables MPEG-4 AVC SD 4:2:2 decoding
Enables MPEG-2 SD 4:2:2 decoding
Requires RX8200/BAS/2, FAZ 101 0113/2 unit
MPEG-2 and MPEG-4 AVC HD 4:2:2 Decoding
(RX8200/SWO/MP4/422/HD, FAZ 101 0113/42)
Enables MPEG-4 AVC HD 4:2:2 decoding
Enables MPEG-2 HD 4:2:2 decoding
Requires MPEG-2 and MPEG-4 AVC SD 4:2:2 option
MPEG-4 AVC HD 4:2:2 1080p 50/60 Decoding
(RX8200/SWO/HDSDI/3G, FAZ 101 0113/34)*
Enables MPEG-4 AVC HD 4:2:2 1080p50/60 decoding
Enables 3Gig HD-SDI output
Requires MPEG-2 and MPEG-4 AVC HD 4:2:2 decoding option
Requires 3Gig HD-SDI output card option
VIDEO PROCESSING OPTIONS
The RX8200 offers a wide range of video processing options to allow the decoded video to easily interface to HD and SD infrastructures.
High Quality Down-conversion
(RX8200/HWO/HQDCONV, FAZ 101 0113/60)
Grade 1 quality Down-conversion of HD to SD
Provides broadcast quality down-conversion allowing one HD transmission to address both HD and SD distribution needs
Simultaneous presentation of HD and SD on video output interfaces
Down-conversion (RX8200/SWO/DCONV, FAZ 101 0113/26)
Grade 2 quality Down-conversion of HD to SD
Simultaneous presentation of HD and SD on video output interfaces
Up-conversion (RX8200/SWO/UPCONV, FAZ 101 0113/54)
Up-conversion of SD to HD resolution
Non-simultaneous up-conversion to 720p or 1080i resolution
Cross-conversion (RX8200/SWO/XCONV, FAZ 101 0113/55)
Conversion of HD video from 720p to 1080i or from 1080i to 720p
Low Latency Decode (RX8200/SWO/LDELAY, FAZ 101 0113/38)
Low latency video decode (4:2:0 and 4:2:2 modes)
Compatible with MPEG-1 Layer-II, Dolby ® Digital or AAC audio options
Frame Sync Input (RX8200/SWO/FSYNC, FAZ 101 0113/33)
Synchronizes the IRD to the house black and burst reference
Frame Sync functionality often partners 4:2:2 decoding applications
Ericsson RX8200 Advanced Modular Receiver
DATA AND CONTROL OPTIONS
The RX8200 Advanced Modular Receiver can be further enhanced by a range of data pass-through and remote control capabilities.
RS232 Remote Control and Data
(RX8200/HWO/RS232, FAZ 101 0113/17)
RS232 remote control - Alteia protocol
RS232 data output
High speed IP data output (RX8200/SWO/IP/DATA, FAZ 101 0113/35)
MPE based data de-encapsulation of IP data
Requires IP TS output option (RX8200/HWO/IP/OUT, FAZ 101 0113/14)
AUDIO OPTIONS
The RX8200 Advanced Modular Receiver provides many different audio capabilities to allow optimal connectivity for many wide-ranging and varied applications.
Capability for MPEG-1 Layer II audio is provided with any video decode license. Decoded audio will be embedded in (HD)SDI outputs and output via physical audio interfaces if ordered.
Balanced Audio Output (RX8200/HWO/BAL/AUD, FAZ 101 0113/3)
2x stereo pairs of balanced analog and digital outputs
Order QTY two for 4x stereo pair capability
Unbalanced Audio Output
(RX8200/HWO/UNBAL/AUD, FAZ 101 0113/19)*
2x stereo pairs of unbalanced digital outputs
Order QTY two for 4x stereo pair capability
Dolby ® Digital Decode (RX8200/SWO/AC3, FAZ 101 0113/22)
Enables decoding or pass-through of Dolby Digital Audio
2x 5.1 decode and down-mix to 2.0 (stereo)
2x 2.0/5.1 pass-through -compressed and embedded in (HD)SDI
AAC Audio decode (RX8200/SWO/AAC, FAZ 101 0113/21)
2x AAC-LC and HE-AAC decoding
Phase Aligned Audio (RX8200/SWO/PAA, FAZ 101 0113/49)
Phase aligned MPEG-1 Layer II audio - 4x stereo pairs
Requires 4x Audio license (RX8200/SWO/4AUD, FAZ 101 0113/20)
4x Audio Capability (RX8200/SWO/4AUD, FAZ 101 0113/20)
Enables up to six decodes
Enables pass-through of audio services three and four
Compatible with MPEG-1 Layer II, Dolby Digital, AAC, Dolby ® linear audio
E and
Embeds up to six channels of audio into the (HD) SDI video output
Requires QTY two audio output cards if four stereo pairs of physical audio interfaces are desired
XLR Terminal Audio Break-Out Cable
(RX8XXX/CABLE/XLR , FAZ 101 0108/24)
Provides XLR terminal connections for analogue and digital audio output
1x stereo pair per breakout cable via 2x XLR connectors
Screw Terminal Audio Break-Out Cable
(RX8XXX/CABLE/SCRTRM, FAZ 101 0108/23)
Provides screw terminal connections for analog and digital audio output
1x stereo pair per breakout cable via 2x Screw terminal connectors
*Check availability
03-2011-v3
Ericsson RX8200 Advanced Modular Receiver
SAMPLE CONFIGURATION
Sample configuration with: Satellite input, frame sync, HD video output, IP transport stream output and 2x Audio output modules installed
SPECIFICATIONS
Standard Features
Input Interfaces
ASI Transport Stream Input
Connector: 1x BNC (F) 75 Ohm
Max. input rate: 160 Mbps
Packet length: 188/204 byte packets
Standard: EN50083-9
Features
Program selection for ATSC, DVB and
MPEG-only streams
One alarm relay, two relays under SCTE 35 control
Service cycling through all decodable services
Control
Front panel keypad and LCD
SNMP control, traps and alarms
Web browser
Input Options
Satellite Input Options
Satellite Input (FAZ 101 0113/5) and (FAZ
101 0113/6)
Connector: 4x F-Type (F), 75 Ohm
Modulation: DVB-S QPSK
Standard: EN300 421
Frequency range: 950 MHz to 2150 MHz
Input level: -25 dBm to -65 dBm
Symbol rate: 1 Msyms to 45 Msyms (DVB-S),
1(5) Msyms to 31 Msyms
Bit rate: 81Mbps
FEC, DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
LNB Power: 13V, 18V or off, 22 kHz on/off
Satellite Input (FAZ 101 0113/6)
Provides the following additional functionality:
DVB-S2 FEC frame: Short & Normal frames
Physical layer scrambling
Symbol rate: 1 y inputs 1, 2
(5) Msyms to 60Msyms on
Bit rate: 170Mbps Max
FEC DVB-S2 QPSK: 1/4, 1/3, 2/5
16APSK via additional licence
DVB-S2 multi-transport stream via additional licence
DVB-S2 QPSK
(FAZ 101 0113/32)
Modulation: DVB-S2 QPSK
Standard: EN302 307
Symbol rate: 5 to 31 (60) Msyms
FEC DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9, 9/10
DVB-S2 8PSK
(FAZ 101 0113/30)
Includes DVB-S2 QPSK functionality
Modulation: DVB-S2 8PSK
FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
DVB-S2 16APSK
(FAZ 101 0113/29)
Includes DVB-S2 QPSK and 8PSK functionality
Modulation: DVB-S2 16APSK
FEC, DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9,
9/10
Requires FAZ 101 0113/6 option
DVB-S2 Low Symbol Rate
(FAZ 101 0113/31)
Symbol rate - extended to 1 to 31 (60)
Msym/s
Applies to DVB-S2 modes only
IP Input Options
MPEG over Gigabit Ethernet IP input
(FAZ 101 0113/12)
Connector: 2 x RJ 45
Format: 100/1000BaseT
Max. input rate: 208Mbps
SMPTE 2022 Pro-MPEG FEC
(FAZ 101 0113/37)
SMPTE 2022 (Pro-MPEG) FEC
G703 Input Options
Ericsson G.703 (FAZ 101 0113/8)
Connector: BNC (F)
Network: G.703 compliant PDH
Input: E3 or DS-3 (selectable)
Bit-rates: 34 Mbps or 45 Mbps versions
Video and TS Output Options
Video Output Options
SD Video Output (FAZ 101 0113/18)
Composite Video
Connector: 2x BNC (F) 75 Ohm
Format: PAL / NTSC
SDI/DVB ASI-C (Switchable)
Connector: 2x BNC 75 ohms
SD-SDI standard: SMPTE 259M
Embedded Audio: SMPTE 272M (SD)
Embedded Audio Channels: two, four or six stereo pairs
ASI standard: EN50083-9
HD and SD Video Output
(FAZ 101 0113/10)
Composite Video
Connector: 1x BNC (F) 75 Ohm
Format: PAL / NTSC
Video RGB-HD (SVGA)
Connector: 1x 15-pin D-type
Format: RGB H&V/YPrPb (switchable)
SDI/HD-SDI/DVB ASI-C (switchable)
Connector: 3x BNC 75 ohms
3 Gbps HD-SDI standard: SMPTE 424M
HD-SDI standard: SMPTE 292M
SD-SDI standard: SMPTE 259M
Embedded Audio: SMPTE 299M (HD)
SMPTE 272M (SD)
Embedded Audio Channels: two, four or six stereo pairs
ASI standard: EN50083-9
TS Output Options
For ASI Output See HD and SD video output options
IP Output (FAZ 101 0113/14)
Transport encapsulation into IP
MPTS/IP/UDP
SPTS/IP/UDP with single service filtering -
CBR mode
IP output VBR mode - Null packets dropped
2x Gigabit Ethernet outputs, 100/1000 autosensing
03-2011-v3
SPECIFICATIONS
Conditional Access Options
Director by Ericsson
(FAZ 101 0113/27)
Director single service decryption
Director over-air remote control
Director by Ericsson Multi-service decryption (FAZ 101 0113/28)
Director multi-service decryption
Decryption of up to 24 services
DVB Common Interface
(FAZ 101 0113/25)
Enables support for all major CAM modules
Single service decryption
Service pre-filtering
DVB Common Interface Multi-Service
Decryption (FAZ 101 0113/46)
Single CAM, up to 10 services or 24 PIDs
BISS Decryption (FAZ 101 0113/23)
Decryption of BISS Mode 1 and E
BISS Multi-Service Decryption
(FAZ 101 0113/24)
Decryption of up to 24 services
Multiple BISS keys*
NDS BSkyB CA (FAZ 101 0113/4)
Accepts BSkyB smart card
Single service descrambling
Mutually exclusive with other CA types
RAS Decryption (FAZ 101 0113/52)
Decryption of Ericsson RAS 1
Signal Protection Decryption (FAZ 101
0113/58)
Decryption of Ericsson Signal Protection
Stream Processing Options
Single Service filtering (FAZ 101 0113/53)
Filter multiple services to 1 outgoing service
Remap PIDs for the filtered service
Output: CBR on ASI and IP SPTS
Multi-Service filtering (FAZ 101 0113/47)
Filter N incoming services to M outgoing services
Number of services: 24 max.
Remap PIDs on a single service
Output: CBR on ASI and IP MPTS
Stream splitting - up to eight services as IP
SPTS
*Check availability
Video Decoding Options
4:2:0 Decoding
MPEG-2 SD Decode
(FAZ 101 0113/45)
Profiles: MP@ML
Max video rate: 15 Mbps (MP@ML)
Video format: 480i and 576i 29.97, 25 fps
MPEG-2 HD Decode
(FAZ 101 0113/44)
Includes MPEG-2 SD 4:2:0
Profiles: MP@HL
Max. video rate: 80 Mbps (MP@HL)
Video format: 1080i at 29.97, 30 and 25 fps
720p at 59.94, 60 and 50 fps
MPEG-4 AVC SD Decode
(FAZ 101 0113/40)
Includes MPEG-2 SD 4:2:0
Profiles: MP@L3
Max. video rate: 12 Mbps
Video format: 480i and 576i 29.97, 25 fps
MPEG-4 AVC HD Decode
(FAZ 101 0113/41)
Includes MPEG-2 SD and HD 4:2:0
Includes MPEG-4 AVC SD
Profiles: MP@L4, HP@L4
Max. video rate: 25 Mbps
Video format: 1080i at 29.97, 30 and 25 fps
720p at 59.94, 60 and 50 fps
VBI with 4:2:0 decoding modes
Closed captions, DVB Subtitle burn-in
WST, Inverted Teletext, EBU Teletext subtitles and non-subtitles, WSS, VITC, VITC in PES, VPS, Video Index, AFD Passthrough, VANC data-piping, Service name in
VANC, monochrome samples
VITS, NABTS, AMOL 48, AMOL 96, TV
Guide
4:2:2 decoding
Ericsson RX8200 Advanced Modular Receiver
MPEG-4 AVC SD 4:2:2
(FAZ 101 0113/43)
Includes MPEG-2 SD 4:2:2
MPEG-4 Profile: 422HP@L3
Max. video rate: 50 Mbps
Video format: 480i and 576i 29.97, 25 fps
MPEG-4 AVC HD 4:2:2 Decode
(FAZ 101 0113/42)
Requires RX8200/BAS/2 unit
Includes MPEG-2 HD 4:2:2
MPEG-4 Profiles: HIGH / HIGH10 /
Sampling: 8-bit and 10-bit
Max. video rate: 50 Mbps CABAC, 85 Mbps
CAVLC
Video format: 1080i at 29.97 and 25 fps 720p at 59.94 and 50 fps
MPEG-4 AVC HD 4:2:2 1080p 50/60 decode
(FAZ 101 0113/34)*
Profiles: [email protected]
Max video rate: 85 Mbps CAVLC
Video format: 1080p at 59.94 and 50fps
VBI with 4:2:2 decoding modes
Closed Captions, VITC, VBI in PIX
Video Processing Options
MPEG-2 SD 4:2:2
(FAZ 101 0113/59)
Profile: 422@ML
Max. video rate: 50 Mbps
Video format: 480i and 576i 29.97, 25 fps
MPEG-2 HD 4:2:2
(FAZ 101 0113/39)
Profiles: 422P@HL
Max. video rate: 90 Mbps
Video format: 1080i at 29.97, 30 and 25 fps,
720p at 59.94, 60 and 50 fps
High Quality Down-conversion (FAZ 101
0113/60)
Grade 1 quality down-conversion
Simultaneous Down-conversion (HD to SD): center cut out, manual/AFD controlled
Down-conversion (FAZ 101 0113/26)
Grade 2 quality down-conversion
Simultaneous Down-conversion (HD to SD): full frame, center cut out, letter box, anamorphic - manual/AFD controlled
Up-Conversion (FAZ 101 0113/54)
Non-simultaneous up-conversion (SD to HD):
To 720p or 1080i (4:2:0 modes only)
Cross-Conversion (FAZ 101 0113/55)
Non-simultaneous cross-conversion 720p to
1080i or 1080 to 720p
No frame rate conversion
Aspect ratio conversion
16:9 to 4:3 center cut ARC in SD modes
Frame Synchronization
(FAZ 101 0113/33)
Enables Frame Sync
Connector: 1x BNC (F) 75 Ohm
Input signal: Analog SD Hsync (black & burst)
03-2011-v3
Ericsson RX8200 Advanced Modular Receiver
SPECIFICATIONS
Data and Control Options
RS232 remote control and data (FAZ 101
0113/17)
Remote control connector: 1x 9-pin D-type
RS232 remote control
Ericsson Alteia protocol
RS232 data connector: 1x 9-pin D-type
RS232 asynchronous data
RS232 data rate: Max. 38.4 kbps
IP high speed data
(FAZ 101 0113/35)
MPE based data de-encapsulation
Max. bit-rate: 100 Mbps
Requires IP TS output card
Audio Options
Balanced Audio Output (FAZ 101 0113/3)
Connector: 2x 9-Pin D-type
Analog audio: two balanced stereo pairs
Digital audio: two balanced stereo pairs
Order QTY 0, 1 or (2 - requires RX8200/
SWO/4AUD)
Unbalanced Audio Output (FAZ 101
0113/19)*
Connector: 2x BNC (F) 75 Ohm
Digital audio: two balanced stereo pairs
Order QTY 0, 1 or (2 - requires RX8200/
SWO/4AUD)
Standard with any video decode option:
2x MPEG-1 Layer-II audio decode
2x Dolby ® Digital Plus Pass-through
2x Dolby ® E pass-through
2x Linear PCM decode
Audio sampling rate: 48 kHz
Decoded audio gain adjustment
Dolby ® Digital (FAZ 101 0113/22)
2x Dolby Digital 5.1 decode and down-mix to
2.0
2 x Dolby ® Digital 2.0/5.1 pass-through compressed and embedded in (HD)SDI
Dolby ® Digital Plus*
2 x Dolby Digital Plus 2.0/5.1 pass-through compressed and embedded in (HD)SDI
AAC Audio (FAZ 101 0113/21)
2x 5.1 down-mix to 2.0
2x 2.0 decode
1x 5.1 decode
Phase Aligned Audio (FAZ 101 0113/49)
MPEG-1 Layer II audio
4x stereo pairs, Phase aligned to enable 5.1 carriage
2x stereo pairs, non phase aligned audio
Requires 4x audio licence FAZ 101 0113/20
4x Audio Capability
(FAZ 101 0113/20)
Extends licensed audio decodes to more channels
6x MPEG-1 Layer II audio decode
6x Dolby ® Digital 2.0 decode, 5.1 to 2.0 downmix
4x Dolby ® Digital 2.0/5.1 pass-through - compressed and embedded in (HD)SDI
4x Dolby ® Digital Plus 2.0/5/1 pass-through - compressed and embedded in (HD)SDI
6x 5.1 AAC down-mix to 2.0
6x 2.0 AAC decode
4x Dolby ® E pass-through
4x Linear PCM pass-through
Physical and Power
Dimensions (W x D x H)
442.5 x 545 x 44mm (17.5“ x 20.7“ x 1.75“ approx.)
Input Voltage
110 VAC / 240 VAC
Power Consumption
120W Max. (depending on options fitted)
Cooling
Integrated fan
Environmental Conditions
Operating Temperature
0°C to +50°C (32° to 122°F)
Storage Temperature
-20°C to +60°C (4° to 140°F)
Relative Humidity
5% to 95%
Compliance
CE marked in accordance with EU Low
Voltage and EMC Directives
EMC Compliance
EN55022, EN61000-3-2 10 , EN61000-3-3 10 ,
EN55024, CISPR22, FCC CFR47 Part 15B
Class A
Safety Compliance
EN60950-1, IEC60950-1, UL60950-1
*Check availability
Americas
Ericsson Television Inc.
Tel: +1 (678) 812 6300
Email: [email protected]
Asia Pacific
Ericsson Television Limited
Tel: +852 2590 2388
Email: [email protected]
Australasia
Ericsson Television Pty Limited
Tel: +61 2 9111 4999
Email: [email protected]
© Ericsson AB. All rights reserved.
Ericsson maintains a policy of product improvement and reserves the right to modify the specifications without prior notice.
EMEA
Ericsson Television Limited
Tel: +44 (0)23 8048 4000
Email: [email protected] www.ericsson.com/television 03-2011-v3
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement