- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Battery chargers
- User manual
advertisement
AUTOMATIC OPERATION
Just connect the unit, choose your battery voltage and type, and the maintainer does the rest!
PL2140 - 6/12 VOLT, 4.0 AMP
BATTERY CHARGER/MAINTAINER
SEALED CASE
Keeps dust and debris out of the maintainer for durability and long life.
SMART CLAMP TECHNOLOGY
Provides reverse polarity protection, eliminates sparking and protects against many forms of operator error.
The SOLAR PRO-LOGIX PL2140 automatic battery charger / maintainer utilizes an advanced multi-phase charging process to deliver an optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a leadacid battery installed in a vehicle, it can be charged and charged right with PRO-LOGIX.
Two tools in one, the PL2140 functions as an advanced automatic battery charger to immediately bring depleted batteries to full charge, plus it functions as an advanced automatic battery maintainer, conditioning and maintaining batteries in long term storage.
V
14
4
2
0
12
10
8
6
MULTI-PHASE CHARGING PROCESS
CONSTANT CURRENT
CONSTANT
VOLTAGE
STATUS
INDICATORS
CHARGING
COMPLETE
PHASE 1
ENERGIZING
ON
OFF
PHASE 2
FAST CHARGE
ON
OFF
PHASE 3
ABSORPTION
ON
OFF
PHASE 4
COMPLETION
FLASHING
ON
PHASE 5
RESTING
OFF
SLOWLY FLASHING
VOLTAGE CURRENT
PHASE 6
EXERCISING
ALTERNATING
FLASHING
PHASE 7
RESTORING
SEE PHASE 2-4
FOR INDICATION
2.0
1.5
1.0
0.0
-1.0
4.0
3.5
3.0
2.5
BENEFICIAL CHARGING /
SUPERIOR LONG TERM CHARGING
The multi-phase PRO-LOGIX charging process ensures optimal energy delivery to each battery charged. Its maintenance mode routine is less stressful than alternative approaches, ensuring that batteries on extended seasonal charge are kept fresh and ready for service.
The PRO-LOGIX routine even exercises the battery to properly prepare it for the maintenance charge.
UL-approved
Clore Automotive | 800.328.2921 | www.solaronline.com
ETL-approved
PL2140 - 6/12 VOLT, 4.0 AMP
BATTERY CHARGER/MAINTAINER
Recovery Mode
The PL2140 can be programmed to recover automatically from power outages, eliminating the need to reset the charger. It can also operate in Standard Mode, which would require resetting the charger after a power interruption. This puts you in control – allowing you to configure the charger exactly as you prefer.
Charges Mulitple Battery Types
Compatible with a wide variety of battery types, including
Conventional, AGM, Gel Cell, Spiral Wound, Deep Cycle and Marine batteries. If it is a 6 or 12 Volt lead acid battery installed in a vehicle, boat or implement, the
PL2140 can charge and maintain it properly to ensure that it is ready when you need it next.
Versatile Charging
With a convenient quick attach cord on the output side, the maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps, ring terminals and 12V male adapter.
Battery Repair Mode
The PL2140 features Battery Repair and Soft Start modes, which automatically commence when needed, to effectively manage sulfated or deeply discharged batteries. When attempting to charge a severely discharged battery, where the battery’s charge is too low for the charger to activate, the operator can force the charger to start charging, avoiding the “dead battery dilemma.”
BA
TTERY
BR
REPAIR
Clore Automotive | 800.328.2921 | www.solaronline.com
L00514
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement