Nike IMARA RUN Owner Manual
Add to my manuals
5 Pages
Nike IMARA RUN is a versatile sports watch designed to help you track your fitness progress and achieve your goals. With its advanced features, you can monitor your time, set alarms, and even track your interval training.
Here's a quick overview of what Nike IMARA RUN can do for you:
-
Timekeeping: Set the time and calendar in two different time zones, and choose between a 12 or 24-hour clock. The watch also has a power-saving mode to conserve battery life.
-
Chronograph: Use the chronograph to capture lap data and total time with an accuracy of up to 1/100th of a second. You can save your data to the watch's memory for later review.
advertisement
IMARA RUN
In TIME mode you can set time and calendar information within two time zones.
BEGIN
Adjust
Function
2 sec
CHRONOGRAPH mode can be used to capture lap data, total time data down to
1/ 100th of a second.
In INTERVAL mode you can set 2 repeating segments for customized interval training
In DATA mode you can review lap and total time data saved from CHRONOGRAPH mode.
In ALARM mode you can set one time alarm. The time alarm will sound for 20 seconds.
In TIME mode you can set time and calendar information within two time zones.
Continue to
Next Setting
+/- to change value
Electrolite ON
Turn Button Chime
ON / OFF
2 sec
Switch Time
Zones
EXIT
Adjust
Function
Select 12 or
24 Hour Clock
Power Save: Display shuts off to conserve batter y life.
Press any button to turn watch ON
CHRONOGRAPH mode can be used to capture lap data, total time data down to 1/ 100th of a second.
Switch display between
Total Time and Lap Time
START Run
Mark LAP 1
The chronograph will pause for 7 seconds upon each marked lap then continue timing the next lap
Mark LAP 2
STOP Run
4 sec
CLEAR Run without saving to DATA mode
4 sec SAVE Run Run saved to
DATA mode
In INTERVAL mode you can set 2 repeating segments for customized interval training
2 sec
Set segment 1 seconds...
Set a segment to 00:00'00" to deactivate it
NOTE: Deactivating a segment will cause one segment to repeat until timer is stopped.
Select segment to begin workout
Minutes...
Hours Select segment 2 Set segment 2 seconds...
Minutes...
Hours
START Timer
STOP Timer
The watch will beep when the first segment reaches zero.
The next segment will begin immediately at the end of the first.
NOTE: All segments will repeat until timer is stopped or completes 50 segment loops
RESET ALL Segments
2 sec
In DATA mode you can review lap and total time data saved from CHRONOGRAPH mode.
CLEAR ALL Runs
2 sec 2 sec
CLEAR Selected Run
4 sec
The information in DATA mode will auto-scroll after 3 seconds
DATA mode can display up to 43 laps
Select RUN
Alarm ON / OFF
In ALARM mode you can set one time alarm.
The time alarm will sound for 20 seconds.
2 sec
Adjusted Alarms turn ON upon EXIT
BATTERY TYPE SR927W 1.5V silver oxide
REMOVE
INSULATOR
REMOVE
INSULATOR
Warning! Keep watch batteries away from children. If swallowed, contact a doctor immediately
Warning! Batteries contain chemical substances. They should be disposed of properly according to local regulations
REMOVE
INSULATOR
Center the insulator sticker onto a new battery. Place the new battery and insulator into the battery compartment under the metal tab.
REMOVE
INSULATOR
Water Resistance
H20 RESIST
50 m
ATTENTION: Water damage may occur if buttons are pressed while under water.
Material Specifications
CRYSTAL
Mineral Glass
STRAP
Polyurethane
CASE
Polycarbonate
BEZEL
Stainless Steel
BUTTONS
Polycarbonate
BUCKLE
Stainless Steel
BATTERY HATCH
Stainless Steel
Mode Limits
CHRONOGRAPH
23:59' 59"
43 lap memory
TIMER
23:59' 59"
50 loops maximum
OPERATING TEMPERATURE
0 to 40˚ Celsius
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement