Before using your washing machine, please read this manual carefully and keep it for future reference.

Washing Machine

OWNER’S MANUAL

MODEL:TL6Kg

Read This Manual

Inside you will find many helpful hints on how to use and maintain your washing machine properly.

Just a little preventative care on your part can save you a great deal of time and money over the life of your washing machine. You'll find many answers to common problems in the chart of troubleshooting tips. If you review the chart of

Troubleshooting Tips first, you may not need to call for service.

Notes

Contents

Safety and precautions........................................................................

2

Installation of the washer......................................................................

5

Preparation before washing..................................................................

7

Parts identification of the washer...........................................................

8

Instruction of the washer operation panel...............................................

9

Quick start..........................................................................................

11

The main wash....................................................................................

12

Special features..................................................................................

13

About the procedure of full automatic wash program.................................. 15

Cleaning and Maintenance of the washing machine..............................................

16

Identify usual trouble of washer..............................................................................

17

Malfunction display and solutions..........................................................

18

Technical specifications................................................................................

18

1

Safety and precautions

Observe the following items in order to prevent from injuring yourself, others and the damage of property:

Warning

Caution

This indicates serious injury or death to human

being may be caused.

This will remind you that injury to people and damage to property may occur.

Please observe following contents of graphics.

This graphics represents(cause attention),and detailed cautions will be displayed inside the graphics.

This graphics represents (operation prohibited), and detailed prohibitive items will be displayed inside the graphics.

This graphic represents (forcible execution), and detailed

forcible execution items will be displayed inside the graphics.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Warning

Please do not disassembly and assembly the machine without authorization.

Please do not insert your hand and take out clothes inside the spin barrel before it is fully stopped.

No dismantling

Please do not install the machine in damp and raining environment to avoid electric shocking, catching fire, faults and distortion accidents.

小天鹅

No dampness

No touching

Please do not directly rinse the machine with water when cleaning.

小天鹅

No rinsing

2

Please do not let children climb the machine or peer into the rotating spin barrel to avoid accidents.

Warning

It is prohibited to wash the clothes touching with kerosene, gasoline, alcohol and other flammable materials.

Prohibited

Prohibited

Please do not damage power flexible cord and power plug to avoid electric shocking, short circuit and catching fire.

Prohibited

Regularly clean the power plug to remove dust and dirt to avoid contact failure.

!

Please pull out plug from the socket if the machine is not in use.

Please well connect the earth line of socket to avoid electric shocking by accidental leakage.

（earthing）

Pull out the plug Earthing

Please insert the power plug tightly.

!

3

Please do not place on the washer burning candle, mosquito-repellent incense, cigarette and other flammable things, as well as electric stove, air heating fan and other

heating

小天鹅

sources.

Smoke and fire prohibited

Please use correct power source.

Please do not pull out or insert the plug with wet hands to avoid electric shocking.

!

Wet hands are prohibited

Caution

Please ensure that the water inlet pipe is connected and the tap is opened before washing clothes.

+

!

The water temperature shall not exceed

50℃ when washing with warm water.

>50

C

小天鹅

Prohibited

Customers are not allowed to change the power line without permission.

It is strictly prohibited to place children or lay weights on the washer.

小天鹅

Prohibited Prohibited

Please do not pull the electric cord when pulling out the plug.

!

Please do not wash down jacket, raincoat, fishing coat and similar clothes in the washer.

Prohibited

4

Installation of the washer

Remove package

Remove package and take out the bottom board of

the cabinet on the foam cover.

Open the lid of washer's door and take out accessories.

A trial operation or washing on the foamed cushion is

strictly forbidden.

Base foamed cushion

Installation of drain hose

Completely sleeve the drain

hose over the sewer.

Fix and tighten it with a hoop.

( As shown in the figure )

Placement of water drain hose

Under3m

If the water drain hose shall be extended, its length shall not exceed 3 meters, otherwise it will affect the water discharging time.

Under 15cm

The placed height of water drain hose shall not exceed

15cm.

Do not bend the water drain hose and place it under the washer.

FOR LOWER DRAIN SYSTEM ONLY

Placement of upper water drain hose

The height of drain hose (“a”)should between 86-100 cm.

Diameter of “b”shuld not less than 3 cm, and flow capacity not less than 40 L/Min.

Before washing machine starts, user should hang up the drain pipe 86-100cm height from the floor.

86~100 cm

FOR UPPER DRAIN SYSTEM ONLY

Installation of water inlet pipe

Put the water inlet pipe(which has metallic filtering bag) screw on to the tap.

Tightly screw another end of water inlet hose on water inlet valve .

(with rubber seal ring inside).

Note: When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid breaking of water inlet valve joint.

Clamping nut

Water inlet hose

Only for model with double

screw thread water inlet pipe

Installation of the washer

Installation of water inlet pipe

+

1

+

+

2

Small ball

3

Push down the slide jacket to expose the small balls and enable separation of connector socket from speedy connector.

Unscrew four screws of part A

A

B

+

5mm

4

Junk ring

over the mouth at the end of

water tap (the mouth at the end

of water tap must be flat and

+

smooth. Flatten it by filing if it is not flat) and push it upward with force making the rubber washer firmly press the plane center of water tap mouth.

Then tighten the screw sequentially. After that, tightly screw on part B.

The connection socket consists of A and B two parts. Before installation,

A and B two parts must

Connect: Push down the slide jacket

of speedy connector (4 small balls

must be exposed ),insert it into the

connection socket and then push be unscrewed about

5mm, or directly disconnected. If the bore of water tap is larger, remove the plastic junk ring of

+

upward Release the connection

of water tap with speedy connector

water, simply open the water tap.

Separate: Close the water tap, push

down the slide jacket of speedy part A.

+

7

Separate

connector and pull out the speedy connector.

Tightly screw another end of water inlet hose on water inlet valve . (with rubber seal ring inside).

Note: When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid breaking of water inlet valve joint.

Clamping nut

Water inlet hose

Only for model with single screw thread water inlet pipe

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The instructions for appliances connected to the water mains by detachable hose-sets shall state that the new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.The

openings must not be obstructed by a carpet.This appliance is for indoor use only.

Preparation before washing

1

Adjust the adjustable foot to make the washer be placed stable.

2

Install the water inlet hose.

For one inlet hose

Adjustable foot (extend when

clockwise rotating and shorten

when counterclockwise rotating)

(Slightly incline the washer first and loosen the adjustable foot knob. Adjust the adjustable foot so as to ensure four corners of washer be steadily contacted with the ground. Then tighten the adjustable foot knob and lock it. If the ground is obviously not flat, correction should be made on the ground surface, otherwise the washer barrel will incline and knock the cabinet)

For two inlet hoses

3

Connect with to power source.

5

Put down the drain house.

Gravity drain

6

Put in clothes and suitable amount of washing powder.

Upper drain

4

Turn on the water supply.

+

Note:

The water will overflow when the height of the drain hose under

860mm.

NOTICE

Before washing, please do take out coins, keys and other hard goods, and zip up clothes

！

7

Parts identification of the washer

Power line

Control panel

Upper drain hose

(For upper drain only)

Top lid

frame

Handle

Cabinet

Drain hose

(For lower drain only)

Adjustable foot knob

Fixing ring (1) is used for the fixing in time of the installation of the lower drain hose.

Accessories

Universal connector

Self-tapping screw

Only for lower drain hose

Water inlet hose assembly

Only for model with single screw thread water inlet pipe

Water inlet hose assembly

Only for model with double screw thread water inlet pipe

Please refer to the real material as the attachment

Base cover

Only for models including base cover

8

Instruction of the washer operation panel

9

Wash

Rinse

Spin

5

3

1

6

4

2

Heavy Quick

Jeans

Normal

Anti-wrinkle

Air dry

Hot

Warm

Cold

Heavy

Normal

10

Quick start

1 Install the washing

machine

2 Load the laundry

3 measure out the

detergent

9 Press the

[start/pause] key

8 Select the desired

programme

7 Plug the power supply

4 Close the

machine door

6 Turn on water supply

5 Put down (hang up)

the drain pipe

Programme selection

1

Press the POWER button.

2

Select the proper water level and other attached functions .

3 press the start/pause key.

The wash stops

When the wash stops, the buzzer will buzz continuously for 6 times and then the power will be automatically cut off.

Turn off the water tap .

Although the power can be cut off automatically, the power plug must be pull out for the safety.

11

The main wash

Instruction of the Heavy program

1.[Heavy] wash program is the easiest, most convenient and most common washing

program. When the user press the power switch and then press [Start/Pause] button,

the heavy washing program will start to work.

2.When the washer start to work, the digital tube show the remain time.

Steps in details

1.Press the power switch.

2.According to the washing amount choose the proper water level.

3.Press START/PAUSE button.

Instruction to single wash procedure

1.User may freely select any single procedure, or any combination of procedures

among WASH, RINSE and SPIN according to the actual requirements. It is only

required to turn off any one or two of these three indicators that not needed by the

user. And keep the indicator be on showing the process needed by the user.

2.Single wash -- after switching on the power, turn off RINSE and SPIN two indicators

by pressing these two keys. The operation for single rinse and single spin is similar.

3.Single wash-spin – after switching on the power, turn off RINSE indicator by pressing

that key. The operation for single rinse-spin and single wash-rinse is similar.

Use the cleaning solution for twice

1. Put the laundry in the first batch and wash powder and press “Function” button to set

single “wash” to run.

2. Take out the laundry in the first batch after hearing the buzzing sound.

3. put in the laundry in the second batch, and run “ Wash”, “Rinse”, “Spin”.

4. Take out the laundry in the second batch after hearing the buzzing sound.

5. Put in the laundry in the first batch and press “ Function” button to run “Rinse” and “Spin”.

！

NOTICE

! .Close the lid of the door when machine is running, otherwise, it will automatically

stop working during spin process and send out abnormal warning.

! .The washer will not work when the filled water does not reach the set water level.

12

Special features

Delay time program

Delay time means the preset beginning time of washing.

1.Switch on the power .

2.Open the tap and lay the drain hose.

3.Put in the laundry and detergent.

4.Select the propre water level according

to the quantity of clothes.

5.Select the functions and programs.

6.Press “DELAY” button to select the

beginning time of washing.

7.close the lid and press “START/PAUSE”

button

Press t he “ D ELAY” b utton e ach t ime, the n umber o n the d igital i ndication adds b y “1” ; After the n umber reaches “ 24”,press t he “ D ELAY”button each t ime , t he n umber a dds b y “6” ;

After t he n umber reaches 4 8, t he l ight of d elay t ime i s turned o ff , a nd t he delay p rogram return to original status.

Confirmation of the delay and inspection

1. After the delay function is started, the corresponding delay light will flash, and other lights

are turned off.

2. After the delay function is started , press “ Delay” button continuously , you may inspect

the preset program and function . Loose the button , the program return to delay status.

Cancel the delay time, or alternate the delay time

1. Press “ Power” button to cancel the delay time.

2. To change the delay time , cancel the delay time first ,

and then press “Delay” button to reset.

Quick

Wash time is short. Suitable to wash light stained clothes and clothes in summer.

Heavy

Delicate wash, especially for heavy fabrics.

Jeans

High wash ability, suitable to wash heavy or serious stained clothes.

Air dry

As for not easily fading,deforming , and non-waterproof clothes , can use the function to dry clothes without heating, and to reach the result of being dried in a room.

Anti-wrinkle

The wash time is short,rinses many time with high water level,thoroughly wash away the garment.

13

Special features

Child lock

Press the “Function” and “water level”at the same time to lock buttons on control panel.Press the

“Function” and “water level”at the same time again to unlock buttons.

Function of automatic power shut off

1. If the machine do not start to work within 10 minutes after powered on, it will power off automatically.

2. After end of operation and the buzzer sounding 6 times, it will power off automatically.

Function of adjusting for imbalance

1. If the laundry is placed uneven before spinning, it is likely to cause vibration during spinning. The washing machine has a function of adjusting imbalance. When working,the washing machine always inspects operation state automatically. If the spinning vibration is too great, the washing machine automatically starts the adjusting program to balance.

2. When the machine adjusts imbalance, rinse light will flash, and the machine will start to inject water to set water level. The machine adjusts imbalance automatically for about 1 minute, then drains water, returns to original spinning state. If the washing machine can adjust the imbalance twice. If the adjustment has no function, it will alarm.

Fuzzy control function

Standard procedures default implementation fuzzy control function. After startup, such as water level before starting the keys will be cancelled automatically according to the fuzzy control functions;

In addition, the fuzzy measure before, if there is no water, tub fuzzy measurement, the water level directly as the default file namely 6 gear levels.

Fuzzy control function is at boot automatically after the determination of cloth is measured, decide the water level. In fuzzy testing process, water circulation flashing lights display, digital pipe display "--".

Power failure memory function

If t he power supply becomes off suddenly during operation, the machine remembers the current operation state.When power is on,the machine returns to former operation state automatically.

14

About the procedure of full automatic wash program

Heavy

44 minutes

48 minutes one time 14 minutes

87 minutes

15

Cleaning and Maintenance of the washing machine

End of program

The washing machine will send off the sound to remind you to take out the laundry or operate it again.

After the sound ,the washing machine returns

to its power-off state with no display and all lights off.

Please shut off the tap, pull out the plug when not in use to avoid water leakage or the fire accidents.

Maintenance

Use gentle clothing to wipe off the water and dirt on the surface each time after using the washing machine.

Detergent , propellant and other chemicals are not allowed to use so as to avoid any damage to the plastic accessories.

Clean the water inlet Clean Of the filter

wash in

(only for magic filter)

After using the washing machine for a period, clean it according to the following steps:

1. Take off the lint filter.

2. Turn over the mesh bag and wash it clean in the water.

3. Restore and fix it.

(only for normal filter)

Clean the lint filter in the drain pump (only for having drain filter)

1. Drain the water out of the

pump,under which use a

container to collect.

2. Loosen the pump cover anticlockwise.

3. Take out the lint filter.

4. Clean the filter.

5. Restore it and adjust the

convex place to align at

the pump hole.

6. Tighten the pump cover

clockwise.

Notes:

If the drain filter is not cleaned at proper time (every 10 times of use),Drain problem could be caused.

16

Identify usual trouble of washer

When the washer is in trouble, please contact local service office or the sales service department of our company and the customer should not dismantle the machine without permission.

If the washer can not work normally, or appear abnormity or alarms, please check and correct as follows.

List of faults and inspection

Faults

Inspection Items

No water flows in

If the power is off or the fuse is burned out.

If the water supply is cut off or the water pressure is too low.

If the inlet hose is properly connected and the water tap is opened.

If the filtering screen of inlet valve is blocked by dirt.

If the coil of inlet valve is damaged. (The slight electromagnetic

sound is normal phenomenon when the inlet valve is switched on)

If the "Start / Pause" button is pressed after the power

switch is pressed.

No washing

If the power is off or the fuse is burned out.

If the power supply voltage is too low.

If the water amount reaches to the required water level.

(The washer will not work if the water amount does not reach the

required water level)

If it is set to "Delay" washing mode. (It will only start to work

until the reservation time reached)

Abnormal draining

If the water drain hose is placed very high.

If the end of water drain hose is sealed in pond.

If the internal rubber ring of drain valve is blocked by dirt.

Abnormal

spin

If the door lid is closed.

If all clothing piled largely at one side of barrel or the clothing

is excessively placed.

If the washer is not placed in stable condition or it is placed in

inclination state. (The ground is not flat).

If the motor belt is loosened.

Note: During the de spin process, if washing are piled at one side of the spin barrel,

it will cause unbalance of spin barrel resulting in striking. At this moment, the

computer inside the washer will feel this unbalance phenomenon and will automatically

correct it ( fill in water Washing ). However, if unbalance situation is not removed after

continuous three corrections, which means the computer auto-correction can not

resolve the problem. Then the user has to manually and evenly place the clothing

inside the barrel to solve the problem.

17

Malfunction display and solutions

When the washer is in trouble, please contact local service office or the sales service department of our company and the customer should not dismantle the machine without permission.

If the washer can not work normally, and the abnormal indication is shown in the nixie tube window or the machine alarms, please check and correct them as follows.

Alarm for water drain time out.

Technical specifications

Size

Rated input

power

Rated voltage

Rated frequency

545x560x940(mm)

560W

240V~

50Hz

Weight of the product

Rated capacity of wash and spinning

Maximum water pressure permitted in the water inlet

Minimum water pressure permitted in the water inlet

18

36Kg

6.0kg

(dry clothes)

0.6Mpa

0.1Mpa