Lennox MPE-27 Installation instructions
Add to my manuals
2 Pages
Lennox MPE-27 electric fireplace offers customizable warmth and ambiance to any room. With its adjustable flame and ember intensity, you can create a fire presentation that suits your mood. The 5,000 BTU heater delivers comforting warmth, while the bronze-tinted glass door adds a touch of elegance and realism. Easy-to-use controls, including a remote control, make operation simple.
advertisement
32"
(833 mm)
22
¹⁄₂"
(572 mm)
25"
(635 mm)
51 ¹⁄₄"
(1302 mm)
Electrical
Junction
Box
MPE-27
Framing Specifications
25"
(635 mm)
Corner View
Note: Framing dimensions are calculated for an in front of the wall front face installation with finish dry wall in place.
Fireplace Specifications
Cat. No.: H3428
Model: MPE-27
Description:
Merit Plus Electric Fireplace - 27”
Shipping Weight: 78 lb.'s (35 KG)
Packaging:
34 1/2” x 14” x 34”
(876 mm x 356 mm x 864 mm)
14.1 cu. ft.
Power Requirements:
(120 Volt, 60 Hz.)
Rated Wattage - 1600 Watts
Amperage - 15 Amps
Blower CFM: 83 CFM
(120 V): 5,461 BTU/HR
32"
Front View
23 ¹⁄₂"
Fireplace Dimensions
4"
(102 mm)
11"
(280 mm)
Side View
⁵⁄₈"
1
¹⁄₈"
Top View
9
¹⁄₂"
28 ¹⁄₄"
31 ¹⁄₄"
(794 mm)
Electrical
Junction
Box
(On Right
Side)
2 x 4
31 ¹⁄₄"
(794 mm)
29
³⁄₈"
29
⁷⁄₈"
23
¹⁄₄"
Specifications and clearances are subject to change without notice. Refer to the Installation Instructions before installation of this appliance for updated dimensions instructions.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
27 ¹⁄₈"
Front View
10 ³⁄₄"
Right Side
775,534M Rev. A 02/07
MPE-27
Minimum Clearances to Combustibles
Sides:
Floor:
Top:
25.5 mm - 1 inch
25.5 mm - 1 inch
25.5 mm - 1 inch
Mantel Clearance: Combustible and Noncombustible mantels may be installed at any height above the top of the face of fireplace.
Hearth Protection: A hearth is not mandatory, but may be used for aesthetic purposes. Secure the hearth extension to the floor to prevent possible shifting.
Do no block the airflow beneath the appliance.
Fireplace Controls
This Merit Plus Electric Fireplace is provided with an Infrared light Remote Control. All functions of the fireplace can be controlled through the remote control.
Note: The effective range of the remote control is up to approximately 25 feet (8 meters).
Manual Controls are also provided on the appliance.
Flame Control
Button
ON/OFF Power
Button
FL TM
Remote Control
Remote Control
Receiver
Temperature
Control Button
Temperature
LED
Manual Controls
Fireplace Features
• Plug-In Ready With Standard Three
Pronged 110V Grounded Power Cord
Makes Installation Easy.
• On/Off Switch, Adjustable Flames/
Ember Beds And Easy-To-Use Heater
Temperature Settings Provides
Customized Control.
• Adjustable Flame And Ember
Intensity Provide Customizable Fire
Presentation.
• Remote Control Adds Convenience.
Standard 5,000 BTU Heater/
Blower With Three Built-in
Thermostatic Settings Delivers
Measured Warmth To Any
Room Environment
Bronze-Tinted Flush Panel
Glass Door Adds A Touch Of
Elegance And Realism
Charred Split Oak Log Set With
Glowing Ember Bed Featuring
Exclusive Lennox Glowing
Ember Crystals
Easy-Access Manual Controls
Mounted On The Unit Makes
Operation Simple
®
C US
CSA Report No. 46-M198
775,534M Rev. A 02/07
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement