NOTE:

Please read all instructions carefully before using this product

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

Model

JD-3.1

Retain This

Manual for

Reference

4-30-05

OWNER'S

MANUAL

APEX JD-3.1

HYPER EXTENSION

BENCH

Escalade International Limited

Pleasant Road, Penllergaer, Swansea. SA4 9GE

Tel: 00 44 1792 222 550 Fax 00 44 1792 895 781 www.escaladesports.co.uk

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICES..................................................................... 2

HARDWARE PACK……….....…....................................................................... 3

ASSEMBLY INSTRUCTIONS........................................................................... 4

EXPLODED DIAGRAM……………………………………………………………… 5

PARTS LIST...................................................................................................... 6

WARRANTY.................................................................................................…. 7

ORDERING PARTS.......................................................................................… 7

BEFORE YOU BEGIN

Thank you for selecting the MARCY APEX JD 3.1. For your safety and benefit, read this manual carefully before using the machine. As the distributor, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts or you require assistance assembling this product, we guarantee you complete satisfaction through direct assistance. To avoid unnecessary delays, please call our customer service department Monday to Friday 9am to 5pm.

Tel / Fax: 0044 (0) 1792 222 562

E mail: [email protected]

Supplied by

Escalade International Ltd

Pleasant Road

Penllergaer

Swansea

SA4 9GE

Tel: 00 44 1792 222550

Fax: 00 44 1792 895781 www.escaladesports.co.uk

E mail: [email protected]

1

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT

YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS

OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH

PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS

EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL

INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE

OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

2

HARDWARE PACK

3

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches

NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Exploded Diagram)

A.) Insert the Rear Base Frame (#2) into the rear of Main Base Frame (#1). Attach the Rear

Post (#3) to the Main Base Frame. Align the holes then secure them together with five

M10 x 5/8” Hex Bolts (#11) and Ø ¾” Washers (#22).

B.) Attach the Seat Post (#4) to the Main Base Frame (#1). Secure it with two M10 x 3” Hex

Bolts (#12), four Ø ¾” Washers (#22), and two M10 Aircraft Nuts (#15) from the side.

Secure it with two M10 x 5/8” Hex Bolts (#11), and Ø ¾” Washers (#22) from the top.

C.) Attach the Seat Pad (#10) to the Seat Bracket (#6). Secure it with four M8 x ¾” Hex Bolts

(#13) and Ø 5/8” Washers (#14).

D.) Attach the Seat Bracket (#6) to the Seat Post (#4). Then attached the Left and Right

Handlebars (#7) & (#8) to the Seat Post. Secure them with four M10 x 5/8” Allen Bolts

(#16) and Ø ¾” Washers (#22).

E.) Slide the Leg Support Frame (#5) onto the Rear Post. Use the Lock Knob (#9) to lock it at desired height.

F.) Push two Foam Rolls (#17) onto the tube on the Leg Support Frame from both ends. Plug a Foam Roll End Cap (#18) to each Foam Roll.

4

EXPLODED DIAGRAM

5

Parts list

22

23

11

12

13

14

15

16

1

2

KEY NO. DESCRIPTION

5

9

18

19

20

Q’ty

Main Base Frame

Rear Base Frame

Leg Support Frame

1

1

1

1

1

1

Adjustment Knob

M10 x 5/8” Hex Bolt

M10 x 3” Hex Bolt

M8 x ¾” Hex Bolt

Ø 5/8” Washer

M10 Aircraft Nut

M10 x 5/8” Allen Bolt

1

1

1

1

7

2

4

4

2

4

Foam Roll End Cap

3” x 2 3/8” Sleeve

2 3/8” End Cap

2

2

2

1

2

Ø ¾” Washer 15

2 3/8” Square End Cap 4

6

LIMITED WARRANTY

Escalade warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the frame and one year on all other parts and components from the date of purchase. This warranty extends only to the original purchaser. Escalade’s obligation under this

Warranty is limited to replacing damaged or faulty parts at Escalade’s option.

All returns must be pre-authorized by Escalade. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage, purchasers own repairs or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by Escalade.

Escalade is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.

Your statutory rights are not affected.

ORDERING REPLACEMENT PARTS

Replacement parts can be ordered by calling our Customer

Service Department Monday to Friday 9am to 5pm .

Tel / Fax: 00 44 1792 222562

E mail: [email protected]

When ordering replacement parts, please give the following information,

1. Model

2. Description of Parts

4. Date of Purchase

7

CARE AND MAINTENANCE

1. Inspect and tighten all parts before using the machine.

2. The machine can be cleaned using a damp cloth and mild nonabrasive detergent. DO NOT use solvents.

3. Failure to examine the BENCH regularly may affect the safety

level of the equipment.