Communications Systems | PLE‑2MAxx0‑EU Plena Mixer Amplifier

PLE‑2MAxx0‑EU Plena Mixer Amplifier

www.boschsecurity.com

u

6 microphone/line inputs plus 3 music source inputs u

100 V, telephone and a call station input with priority & VOX u

2 zones and announcement only output u

Voice activated emergency override u

High output power 120 and 240 Watts

These Plena mixer amplifiers are high performance, professional public address units with modern state of the art features. They are easy to use, taking the complexity away from the user and putting it where it belongs, inside the equipment. Providing a crisp call or clear music is as easy as turning on the radio.

The amplifier is also surprisingly affordable, without sacrificing features such as ducking, priority and flexibility.

Functions

Microphone and line inputs

All Mic/line inputs can be switched between microphone level and line level sensitivity. The inputs are balanced but can be used unbalanced. Phantom power can be switched on to provide power to condenser microphones.

Input channels 1 and 2 can take priority over all other microphone and music inputs:

• Input 1 can be activated by contact closure on the

PTT (push to talk). A 2-tone chime can be configured to precede an announcement.

• Input 2 can be switched automatically if a signal is fed to the input i.e. if someone speaks into the microphone (VOX activation).

When one or both inputs are configured to have priority, the amount of attenuation (reduction) of the cinch inputs, can be set between ‑2 dB (little attenuation) or -∞ dB (mute). This provides a talk-over or voice-over function. Input channels 1 and 2 also feature selectable speech filters to enhance the clarity of announcements.

Music inputs

Separate music inputs are available with their own input selector and volume control. The user can choose a music source like a CD player or radio (like the PLN-DVDT), and set the level of music.

You can set the desired sound for the music source separate from the mic/line inputs. So if the music needs boosted low frequencies, this does not lead to muddy sounding voices from the microphones. A truly unique feature in its class.

Personalized settings

More unique features are available such as detachable labels where the user can write the names for inputs, music sources and zones. These labels can then be mounted on the front, protected by the clear window.

Another useful feature is to indicate preferred settings on the front panel by inserting colored pins at the preset levels of all knobs. You can then instruct a user to set all the controls to the silver pins to configure the system for their particular use. A second user can set all controls to the red pins for their configuration.

2 | PLE‑2MAxx0‑EU Plena Mixer Amplifier

Tone controls

The unique tone controls provide separate control for mic/line inputs and music inputs so that the voice on the microphones can be specifically optimized for excellent speech or singing. Correspondingly, the tone controls for background music provide the most appropriate music reproduction.

In addition, the tone controls are not standard bass and treble controls. Our experience has led us to develop a tone control that can be used as a traditional tone control with high and low control, but has a powerful contour that addresses the problems found in real situations.

The tone control for the microphone and line inputs boosts warmth in voices without boosting rumble and cuts rumble without loosing warmth in the low frequencies. In the high frequencies, the tone control boosts sparkle without adding sharpness, but when cutting is first, cuts harshness and sharpness without reducing clarity.

The tone control for the music inputs boosts deep bass first without making the sound boomy, and cuts rumble without loosing warmth in the low frequencies.

In the high frequencies the tone control is similar to the microphone inputs, with slightly different frequencies to suit music reproduction.

For easy integration with another PA system or a telephone paging system, a telephone / 100 V emergency input with VOX activation is provided. It has its own preset volume control and overrides all other inputs, including call station and inputs 1 and 2.

The unit also has a line output to add amplifiers for larger systems, with more output power, this output can be switched to music only so that for instance music on hold can be provided for the telephone system. Insert (loop through) input and output connections enable external sound processing equipment, such as an equalizer or the Plena feedback suppressor, to be connected between the preamplifier and the power amplifier stages.

Power

These Plena mixer amplifiers come in 120 and

240 Watts output power. This power is directly available on 100 V constant voltage connections and on a low impedance connection for an 8 ohm load.

Moreover, the amplifiers have a separate 100 V callonly output channel for addressing areas where only priority announcements are required. The call-only output can also be used for 3-wire remote, volume control override.

Zones

The mixer amplifier has two zone outputs. The music can be switched on and off in the zones via the front panel and optional wall panel. Announcements from the PLE-2CS two-zone call station can be routed to zone 1 or zone 2, or both. Announcements from the tel/100 V input or inputs 1 & 2 are routed to both zones. Input 1 can be used for a PLE-1CS all-call call station or any other microphone or call station with a

PTT contact.

Output status

An LED VU meter monitors the master output. A headphone socket, below the VU meter, provides the mixer output before zone selection so that it is possible to listen to the output before the signal is sent to the zone. For total reliability and ease of use, a limiter is integrated into the output stage to restrict output if the user applies too much signal.

Controls and indicators

Front

• On/off switch

• Power on LED

• LED VU meter for master output (LEDs for -18, -12 -6,

-3, 0 dB)

• Master volume knob

• Six volume knobs for microphone inputs

• Knob for treble level

• Knob for bass level

• Headphone socket

• Two zone selector buttons

• Background music button

Back

• Dip switches

• Chime level

• Ducking level

• Tel/100 V volume control

Interconnections

See Technical Specifications.

Certifications and approvals

Safety

EMC emission

EMC immunity

Installation/configuration notes acc. to EN 60065 acc. to EN 55103-1 acc. to EN 55103-2

Rear view

3 | PLE‑2MAxx0‑EU Plena Mixer Amplifier

Parts included

1

1

1

1

Quantity

1

Components

PLE-2MA120-EU / PLE-2MA240-EU Plena Mixer Amplifier

Power cord

Manual

Set of 19”mounting brackets

Plena Easy Line CD

Technical specifications

Electrical

Mains power supply

Voltage

Inrush Current PLE-2MA120-EU

Inrush Current PLE-2MA240-EU

115 - 230 VAC ±10%,

50/60 Hz

8/16 A (230/115 VAC)

9/19 A (230/115 VAC)

Battery power supply

Voltage

Current PLE-2MA120-EU

Current PLE-2MA240-EU

Charge current

Charge float voltage

Power consumption

PLE-2MA120-EU (mains)

PLE-2MA240-EU (mains)

Performance

Frequency response

Distortion

Low Control

Hi Control

RJ-45 input

Call station input

Wall panel input

24 VDC, +10% / -15%

6 A

12 A

0.5 ADC

27.3 VDC

400 VA

800 VA

50 Hz to 20 kHz (+1/‑3 dB @

‑10 dB ref. rated output)

<1% @ rated output power,

1 kHz

Max -12/+12 dB (frequency is setting dependent)

Max -12/+12 dB (frequency is setting dependent)

2 x

For PLE-2CS(MM)

For PLE-WP3S2Z

Mic/line input

Input 1 (Push-to-talk contact with ducking functionality)

Input 2-6 (VOX with ducking functionality on input 2)

Sensitivity

Impedance

S/N (flat at max volume)

S/N (flat at min volume/muted)

Dynamic range

S/N (flat at max volume)

S/N (flat at min volume/muted)

CMRR (mic)

Headroom

Speech filter

Phantom power supply

Speech filter

VOX (input 1 & 2)

Music inputs

Connector

Sensitivity

Impedance

S/N (flat at max volume)

S/N (flat at min volume/muted)

Headroom

Emergency / telephone

Connector

Sensitivity tel

Sensitivity 100V

Impedance

S/N (flat at max volume)

VOX

6 x

5-pin Euro style, balanced, phantom

3-pin XLR, balanced, phantom

3-pin XLR, balanced, phantom

1 mV (mic); 1 V (line)

>1 kohm (mic);

>5 kohm (line)

63 dB

>5 dB

93 dB

>63 dB (mic); >70 dB (line)

>75 dB

>40 dB (50 Hz to 20 kHz)

>17 dB

-3 dB @ 315 Hz, high-pass,

6 dB/oct

16 V via 1.2 kohm (mic)

-3 dB @ 315 Hz, high-pass,

6 dB/oct attack time 150 ms; release time 2 s

3x

Cinch, stereo converted to mono

300 mV

22 kohm

>70 dB

>75 dB

>25 dB

1 x

7-pin, Euro style pluggable screw terminal

1 V maximum

100 V maximum

>10 kohm

>65 dB threshold 50 mV; attack time

150 ms; release time 2 s

4 | PLE‑2MAxx0‑EU Plena Mixer Amplifier

Insert

Connector

Nominal level

Impedance

1 x

Cinch

1 V

>10 kohm

Master/music output

Connector

Nominal level

Impedance

Loudspeaker outputs 100 V*

Connector

Max / rated PLE-2MA120-EU

Max / rated PLE-2MA240-EU

1 x

3-pin XLR, balanced

1 V

<100 ohm

Screw, floating

180 W / 120 W

360 W / 240 W

Loudspeaker output 8 ohm*

Connector Euro style pluggable screw terminal, floating

31 V (120 W) PLE-2MA120-EU

PLE-2MA240-EU 44 V (240 W)

* Subtract 1 dB for 24 V battery operation.

Mechanical

Dimensions (H x W x D)

Mounting

Color

Weight (PLE-2MA120-EU)

Weight (PLE-2MA240-EU)

100 x 430 x 270 mm

(19" wide, 2U high)

Stand-alone, 19" rack

Charcoal

Approx. 10.5 kg

Approx. 12.5 kg

Environmental

Operating temperature

Storage temperature

Relative humidity

Acoustic noise level of fan

-10 ºC to +45 ºC

-40 ºC to +70 ºC

<95%

<33 dB SPL @ 1 m temperature controlled

Ordering information

PLE‑2MA120‑EU Plena Mixer Amplifier

Mixer amplifier, 120 W, 10-inputs.

Order number PLE-2MA120-EU

PLE‑2MA240‑EU Plena Mixer Amplifier

Mixer amplifier, 240 W, 10-inputs.

Order number PLE-2MA240-EU

5 | PLE‑2MAxx0‑EU Plena Mixer Amplifier

Represented by:

Americas:

Bosch Security Systems, Inc.

12000 Portland Avenue South

Burnsville MN 55337, USA

Phone: +1-800-392-3497

Fax: +1-800-955-6831 [email protected]

www.boschsecurity.com

Europe, Middle East, Africa:

Bosch Security Systems B.V.

P.O. Box 80002

5617 BA Eindhoven, The Netherlands

Phone: + 31 40 2577 284

Fax: +31 40 2577 330 [email protected]

www.boschsecurity.com

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security

Systems

11 Bishan Street 21

Singapore 573943

Phone: +65 6571 2808

Fax: +65 6571 2699 [email protected]

www.boschsecurity.asia

© Bosch Security Systems 2015 | Data subject to change without notice

1880904971 | en, V5, 01. Jul 2015

China:

Bosch (Shanghai) Security Systems Ltd.

201 Building, No. 333 Fuquan Road

North IBP

Changning District, Shanghai

200335 China

Phone +86 21 22181111

Fax: +86 21 22182398 www.boschsecurity.com.cn

America Latina:

Robert Bosch Ltda Security Systems Division

Via Anhanguera, Km 98

CEP 13065-900

Campinas, Sao Paulo, Brazil

Phone: +55 19 2103 2860

Fax: +55 19 2103 2862 [email protected]

www.boschsecurity.com