WRT-805A/807A/808A WRR-802A/805A MB-806A

U
Freedom™ Series UHF Synthesized Wireless Microphone System
WRT-805A/807A/808A
WRR-802A/805A
MB-806A, WRU-806A
Performance
you’ve always wanted at
a price you never expected.
They’re used in broadcasting for everything
from network news, to talk shows to soap
operas. They’re used when rock and roll
headliners hit the stadium circuit, and for
Broadway musicals. Sony’s 800 Series UHF
Wireless Microphone Systems are the stuff of
pro audio legend. But until now, this high
performance has only been available to
musicians and producers with deep pockets.
Now Sony changes all that with the latest
additions to the 800 MHz UHF Wireless
Microphone family. Now you’re free from the
interference, distortion and assorted hash of
the crowded VHF band. You’re free to mix
and match mics, body packs and receivers
with the rest of Sony’s 800 Series. And you’re
free to step up to the UHF world, even if your
budget is firmly rooted in the real world.
Sony Offers...
Freedom To UHF Performance At VHF Prices
Up to 19-channel
Simultaneous Operation
Special combinations of
intermodulation-free wireless
channels are conveniently stored in
the CPU of each tuner. This makes
it easy to choose the correct
operating frequencies for
simultaneous multi-channel
operation. This UHF synthesized
wireless system employs six
channel groups. Each group allows
for different variations on the
number and combination of various
UHF TV channels. By using
channel number designations of
(64), (66) and (68), up to 19
channels can be operated
simultaneously, over all channels
from 64 to 69.
Channel Allocation
TV Channel
Group No.
11
TV Channel
Group No.
A1
(64)
64,65
(66)
66,67
(68)
68,69
(64)
65
(66)
67
(68)
69
(64)
64
(66)
66
(68)
68
64-05
66-05
68-05
64-14
66-14
68-14
65-01
67-01
69-01
65-05
67-05
69-05
64-03
66-03
68-03
64-13
66-13
64-25
66-25
68-25
65-11
67-11
68-13
69-11
64-18
66-18
64-41
66-41
68-41
65-25
68-18
67-25
69-25
64-26
66-26
64-47
66-47
68-47
68-26
65-28
67-28
69-28
64-37
66-37
65-12
67-12
68-37
69-12
65-36
67-36
69-36
64-40
66-40
65-16
68-40
67-16
69-16
65-41
67-41
69-41
64-44
66-44
68-44
65-30
67-30
69-30
65-43
67-43
69-43
64-46
66-46
68-46
65-37
67-37
69-37
65-40
67-40
69-40
65-42
67-42
69-42
(64)
64,65
(66)
66,67
(68)
68,69
(64)
65
(66)
67
(68)
69
(64)
64
(66)
66
(68)
68
64-05
66-02
68-06
65-02
67-07
69-11
64-01
66-06
68-10
64-12
66-24
68-20
65-19
67-33
69-22
64-18
66-22
68-21
64-15
66-29
68-24
65-43
67-45
69-30
64-42
66-44
68-29
65-24
67-16
68-40
69-36
68-35
65-33
67-18
69-04
69-40
68-39
67-39
69-17
69-43
68-42
69-23
69-45
68-44
69-47
TV Channel
Group No.
12
TV Channel
Group No.
A2
TV Channel
Group No.
13
TV Channel
Group No.
A3
800 MHz UHF Transmission
Quality
If you want to escape the walkietalkies, CB radios and hash of the
VHF band, step up to 800 MHz UHF.
As with previous Sony 800 MHz
wireless products, these new 800
Series components bring you all the
benefits of Sony engineering, offering
a choice of 282 wireless channels, in
the range from 770 to 806 MHz.*
* Frequencies and TV bands differ in versions
shipped to other countries.
WRR-805A with Sony DCR-VX1000 camcorder
Frequency-Agile Frequency-Synthesis Tuning
Space Diversity Reception for Added Protection
Because RF interference can change from venue to venue -and from night to night -- Sony’s wireless systems can also
change. You get your choice of 282 wireless channels, available to switch at a moment's notice. This ability, made
possible by Sony Frequency Synthesis Tuning, is your first line
of defense against all those other potential sources of i
nterference.
If you’ve ever listened to a car radio in a traffic jam, you know
that small changes in location can make a big difference in
radio reception. The same is true when “talent” moves about
the stage with a wireless mic. Sony’s defense against the threat
of multipath distortion is by equipping our receivers with Space
Diversity Reception. The system uses two receiving antennas,
some distance apart. The tuner constantly compares the signal
from both antennas -- and chooses the best one!
MB-806A and WRU-806A
Freedom Of Operational Convenience
Remote Battery Alarm on Receiver
For added assurance of continued operation,
you can now monitor the battery reserves of
handheld, body pack and plug-on
transmitters; the battery indicator on LCD
starts flashing on the handheld and body
pack transmitter, and the battery indicator on
LED turns red on the plug-on transmitter,
both indicating approx. one hour before the
batteries go dead. On the receiver, the
battery indicator on the LCD and LED
displays also flash, helping to avoid the
chance of battery failure at a critical moment.
Long Operating Time with A Single AA-size (LR6) Alkaline Battery
Comprehensive LCD
The handheld mic offers up to 5 hours of continuous operation, and 6 hours for the
body pack transmitter are guaranteed with only one single AA-size (LR6) alkaline battery.
For operational convenience, an easyto-read LCD (Liquid Crystal Display) is
built into the handheld mic, body pack
transmitter, and receivers to provide
various information such as battery
status indication, accumulated
operating hours, operating channel,
and attenuation.
* Battery life depends on environmental and usage conditions.
Modular Design for 6/11/19 Simultaneous Operation
The MB-806A Tuner Base Unit features slots for six WRU-806A diversity receiver
modules, with an internal antenna divider for six channels of diversity operation in a
single rack space. Using the optional WD-820A Antenna Divider, you can go even
further, with up to 19 wireless mics operating simultaneously on a single pair of
AN-820A active antennas!
Auto Channel Assignment
The MB-806A also features a convenient auto channel assignment
function. Once an operating group is set on one of the installed
WRU-806A receiver, channels within the same group are automatically
assigned, and unusable channels for the additional receivers will be
automatically detected and skipped. This enables instant and
automatic multi-channel setting of the entire rack of receivers.*
* Auto channel assignment function is available only when the tuner base unit holds the
receiver modules in the same TV channels.
Compatible with Sony’s Existing
800 Series
You can mix and match these new wireless
components with previous Sony 800 Series
components as you please! Use the new body pack
transmitters and mics with your existing receivers -or use existing transmitters with the new receivers.
Main Features
WRT-807A
WRT-807A
UHF Synthesized Dynamic Wireless Microphone
• High sound quality for vocals - powerful, crisp and clean sound
as well as presence in the low and mid frequency range
• Dynamic microphone capsule which is employed in the Sony
F-780 professional vocal microphone
• LCD for display of channels, attenuator and accumulated
operating hours
• Up to 5 hours of continuous operation with a single AA-size
(LR6) battery
• 10 mW RF power output
• Battery alarm transmitted to compatible receivers
• Newly-developed lockable power switch
to prevent accidental operation
WRT-805A
WRT-805A
UHF Synthesized Body Pack Transmitter
• Smoothly tapered body pack with compact, lightweight design
• Battery alarm transmitted to compatible receivers
• LCD for display of channel, attenuator and accumulated operating hours
• Up to 6 hours of continuous operation with a single AA-size (LR6) alkaline battery
•10 mW RF power output
• 3-pole mini jack with a lock mechanism for secure lavalier cable clamping
• Switchable -40 dB/-60 dB input level and PHASE switches for guitar and lavalier microphone
• Microphone options:
GC-0.7MP Guitar Cable, ECM-44BMP/ECM-77BMP/ECM-121BMP/ECM-122BMP/ECM166BMP Electret Condenser Microphone and ECM-310BMP Electret Condenser Headset
Microphone
WRT-808A
UHF Synthesized Transmitter
• Plug-on transmitter – converts a microphone to a wireless microphone
• Fitted with an XLR connector
• Compact and lightweight body, providing balanced handling
• Durable connecting mechanism for dependable operation
• Switchable RF power output, 50 mW for a longer working distance
or 10 mW for multi-channel operation
• Variable input attenuation, 0 dB to 50 dB
• Battery alarm transmitted to compatible receivers
• LED for AF/Peak, battery indication
• Up to 4 hours continuous operation with two AA-sized (LR6) alkaline batteries
WRT-808A
WRR-802A
UHF Synthesized Diversity Tuner
• Single-channel Space Diversity Tuner
• Half 19-inch rack width and 1U height
• AF, RF, and battery alarm indication by both LED and LCD to
double check operating condition (channel indication by
LCD only)
• Output volume control
• Supplied portable front-mounted passive antennas
WRR-802A
Two types of output connectors
Rear Panel
- TRS Phone Balanced connector (6.3 mm
dia.), -20 dBm for LINE
- XLR connector, -58 dBm for MIC or –20
dBm for LINE
MB-806A
*The six optional WRU-806A are installed.
MB-806A
Rear Panel
Tuner Base Unit
• Modular design, 1U height 19-inch rack
• Accommodates up to six WRU-806A for up to six simultaneous channels of operation
• Up to 11 simultaneous channels on a single pair of AN-820A Active Antennas with the optional WD-820A
Antenna Divider
• Up to 19 simultaneous channels on a single pair of AN-820A Active Antennas with the optional WD-820A
Antenna Divider
• XLR output connectors for each tuner and mix output
• Selectable output level, -58 dBm for MIC or –20 dBm for LINE
• Space Diversity Reception for dependable RF reception
• AF, RF, and battery alarm indication by both LED and LCD to double check operating condition (channel
indication by LCD only)
• Auto channel assignment of additional receiver modules for instant programming of interference-free
multichannel operation
• RF input attenuator (10 dB/0 dB) switch
• Supplied passive antennas for rear mounting (with provision for front mounting)
WRR-805A
WRU-806A
WRR-805A
UHF Synthesized Tuner Unit
UHF Synthesized Portable Tuner
• Dedicated plug-in diversity receiver module for
MB-806A
• Space Diversity Reception for dependable RF
reception
• Compact, lightweight portable tuner for a wide variety of
camcorders that have a stereo mini jack
• Flexible mounting position and direction for secure operation
• RF, battery alarm indication by both LED and LCD to double check
operating condition (AF and channel indication by LCD only)
• LCD for display of operating channel, AF, RF, accumulated
operating hours, the tuner’s battery status
• LED for RF condition, the transmitter’s battery alarm indication
• Convenient headphone monitoring with volume control
• 3-pole mini jack with a lock mechanism for secure camera cable
clamping
• Up to 6 hours of continuous operation with two AA-size (LR6)
alkaline batteries
•RF Muting function
WRU-806A
System Configuration
Single-Channel System
Example 1
Example 3
ANTENNA A
+
+
WRR-802A
WRT-807A
WRT-808A
OR
Example 2
MB-806A w/one WRU-806A installed
WRT-805A
6-Channel System
AN-820A x 2
(Option)
WRT-807A or WRT-805A
or WRT-808A x 6
MB-806A w/six WRU-806A installed
11-Channel System
AN-820A (Option) AN-820A (Option)
WD-820A
(Option)
WRT-807A or WRT-805A or
WRT-808A x 11
MB-806A w/six WRU-806A installed x2
19-Channel System
AN-820A (Option) AN-820A (Option)
WD-820A
(Option)
WRT-807A or WRT-805A or
WRT-808A x 19
MB-806A w/six WRU-806A installed x3
ANTENNA A
+
+
WRR-802A
Options for WRT-805A Transmitter
Electret Condenser
Microphone
Electret Condenser
Microphone
Electret Condenser
Microphone
Electret Condenser
Microphone
Electret Condenser
Microphone
ECM-310BMP
ECM-44BMP
ECM-77BMP
ECM-121BMP
122BMP
ECM-166BMP
Guitar Cable
GC-0.7MP
Specifications
WRT-807A (68),(66),(64)
794 MHz to 806 MHz (68)
782 MHz to 794 MHz (66)
770 MHz to 782 MHz (64)
Oscillator:
Crystal controlled PLL synthesizer
Type of emission:
110KF3E
RF power output:
10 mW (50 Ω load)
Antenna:
1/4 wave length wire antenna
Reference deviation:
±5 kHz (94 dB SPL*1, 1 kHz)
50 Hz to 15,000 Hz
Frequency response:
More than 60 dB (A-weighted)
Signal-to-noise ratio:
Attenuator adjustment range (pad): 21 dB, variable in 3 dB steps
151 dB SPL*1 (1 kHz)
Max. sound pressure level:
Max. input level:
—
Input level:
—
WRT-805A (68),(66),(64)
794 MHz to 806 MHz (68)
782 MHz to 794 MHz (66)
770 MHz to 782 MHz (64)
Crystal controlled PLL synthesizer
110KF3E
10 mW (50 Ω load)
1/4 wave length wire antenna
±5 kHz (-60 dBV*2, 1 kHz input)*3
70 Hz to 15,000 Hz
57 dB (A-weighted)
21 dB, variable in 3 dB steps
—
+17 dBV (-40 dBV position, attenuator 21 dB)
-40 dBV (±16 kHz deviation at 1 kHz modulation)*3
-60 dBV (±5 kHz deviation at 1 kHz modulation)*3
—
—
3.5 mm (5/32 inch) dia.
—
3-pole mini phone jack with lock mechanism
—
Dynamic
—
Uni-directional
DC 1.5 V, AA-size (LR6) alkaline battery(1) DC 1.5 V, AA-size (LR6) alkaline battery(1)
Approx. 5 hours w/(LR6)
Approx. 6 hours w/ (LR6)
AA-size alkaline battery (1)
AA-size alkaline battery (1)
51 x 238 mm (2 1/8 x 9 3/8 inches)
58 (W) x 93 (H) x 21 (D) mm
(Max. dia. x length)
(2 3/8 x 3 3/4 x 27/32 inches)
440 g (15.5 oz) w/ battery
100 g (3.5 oz) w/ battery
Operating instructions (1)
Operating instructions (1)
Microphone holder (1)
Metal screw adaptor (1)
WRT-808A (68),(66),(64)
794 MHz to 806 MHz (68)
782 MHz to 794 MHz (66)
770 Mhz to 782 MHz (64)
Crystal controlled PLL synthesizer
110KF3E
50 mW or 10 mW selectable (50 Ω load)
Internal antenna
±5 kHz (-60 dBV*2, 1 kHz input)
70 Hz to 15,000 Hz
More than 57 dB (A-weighted)
0 to 50 dB, continuous
—
26 dBV*2
—
Frequency stability:
Input connector:
Within ±0.005 %
XLR-3-11 type
Carrier frequency:
Microphone capsule:
Directivity:
Operating voltage:
Battery life:
Dimensions:
Mass:
Supplied accessories:
*1 0 dB SPL = 2 x 10-5 Pa.
*2 0 dBV = 1 Vr.m.s.
Receiving frequency:
Oscillator:
Type of reception:
Reference deviation:
Selectivity:
Spurious rejection:
Frequency range:
Signal-to-noise ratio:
Harmonic distortion:
RF muting level:
Audio output level:
Audio output connector:
Antenna connector:
Headphone output connector:
Power consumption:
Operating voltage:
Current consumption:
Battery life:
Dimensions (W x H x D):
Mass:
Supplied accessories:
—
—
DC 3.0 V, AA-size (LR6) alkaline battery (2)
Approx. 4 hours w/(LR6)
AA-size alkaline battery (2)
40 x 40 x 108 mm
(1 5/8 x 1 5/8 x 4 3/8 inches)
175 g (6.18 oz) w/ batteries
Operating instructions (1)
*3 INPUT switch at -60 dBV position
WRR-802A (68),(66),(64) MB-806A
770 MHz to 806 MHz
794 MHz to 806 MHz (68),
782 MHz to 794 MHz (66),
770 MHz to 782 MHz (64)
Crystal controlled PLL synthesizer
—
110KF3E
—
±5 kHz
—
More than 60 dB
—
More than 70 dB
—
100 Hz to 15,000 Hz
—
More than 60 dB (A-weighted)
—
Less than 1.0 %
30 dBµ
-20 dBm (±5 kHz deviation at
1 kHz modulation)
XLR and TRS phone, 6.3 mm
(1/4 inch) dia., balanced
BNC-R type
—
—
DC 9 V
600 mA
—
218 x 44 x 210 mm
(8 5/8 x 1 3/4 x 8 3/8 inches)
1.6 kg (3 lb 8 oz)
Operating instructions (1)
AC power adaptor (1)
Antenna (2)
WRR-805A (68),(66),(64)
794 MHz to 806 MHz (68),
782 MHz to 794 MHz (66),
770 MHz to 782 MHz (64)
Crystal controlled PLL synthesizer
110KF3E
±5 kHz
More than 60 dB
More than 70 dB
100 Hz to 15,000 Kz
More than 30 dB
(A-weighted RF input: 10 dBµ)
More than 60 dB
(A-weighted RF input: 60 dBµ)
—
Less than 1.0 %
Less than 1.0 %
—
30 dBµ
15 dBµ ±5 dBµ
-20 dBm/-58dBm (±5 kHz
—
-58 dBm (±5 kHz deviation at
deviation at 1 kHz modulation)
1 kHz modulation)
—
XLR type
3.5 mm (5/32 inch) dia. 3-pole
mini phone jack with look
mechanism, balanced
—
BNC-R type
—
—
—
3.5 mm dia. (5/32 inch) 3-pole
mini phone jack
—
30 W
—
DC 3 V, AA-size (LR6) alkaline battery (2)
DC 9 V
AC 120 V, 60 Hz
170 mA
225 mA
—
Approx. 6 hours w/(LR6)
—
—
AA-size alkaline battery (2)
44 x 121 x 24 mm
57 x 26 x 122 mm
482 x 44 x 300 mm
(2 1/4 x 1 1/16 x 4 7/8 inches) (1 3/4 x 4 7/8 x 31/32 inches)
(19 x 1 3/4 x 11 7/8 inches)
140 g (4.9 oz) w/batteries
160 g (5.7 oz)
3.6 kg (7 lb 15 oz)
Operating instructions (1)
Operating instructions (1)
Operating instructions (1)
Attachment case with a belt clip (1)
AC power cord (1)
Output cable (1)
Antenna (2)
* 0 dBm = 0.775 Vr.m.s., 600 Ω load, 0 dBµ = 1 µV, 0 dBu = 0.775 Vr.m.s. open
WRU-806A (68),(66),(64)
794 MHz to 806 MHz (68),
782 MHz to 794 MHz (66),
770 MHz to 782 MHz (64)
Crystal controlled PLL synthesizer
110KF3E
±5 kHz
More than 60 dB
More than 70 dB
100 Hz to 15,000 Hz
More than 60 dB
(A-weighted)
Capsule type:
Frequency range:
Directivity:
Sensitivity
(0 dB = 1 V/1 Pa. at 1 kHz):
Output impedance:
Microphone cable:
Output connector:
Dimensions Microphone head:
Mass
Microphone head:
Total:
Finish:
Supplied accessories:
Capsule type:
Frequency range:
Directivity:
Sensitivity
(0 dB = 1 V/1 Pa. at 1 kHz):
Output impedance:
Microphone cable:
Output connector:
Dimensions Microphone head:
Mass
Microphone head:
Finish:
Supplied accessories:
Input impedance:
Connectors:
Cable:
Mass:
ECM-310BMP
Electret condenser
70 to 12,000 Hz
Wide-cardioid
-44 dB (6.3 mV) ±3 dB
ECM-44BMP
Electret condenser
40 to 15,000 Hz
Omni-directional
-40 dB (10 mV) ±3 dB
ECM-77BMP
Electret condenser
40 to 20,000 Hz
Omni-directional
-39 dB (11 mV) ±2 dB
800 Ω ±30 % at 1 kHz, unbalanced 2.5 kΩ ±30 % at 1 kHz, unbalanced 2.5 kΩ ±30 % at 1 kHz, unbalanced
1.2 m (3.9 feet)
1.2 m (3.9 feet)
1.2 m (3.9 feet)
3.5 mm (5/32 inch) dia. 3-pole mini phone plug with lock mechanism
8.5 mm dia. x 14.5 mm
5.6 mm dia. x 12.5 mm
10 mm (13/32 inch) dia.
(11/32 inch dia. x 19/32 inch)
(1/4 inch dia. x 1/2 inch)
Approx. 2 g (0.07 oz)
Approx. 1.5 g (0.05 oz)
—
Approx. 46 g (1.62 oz),
without connector
Mat black finish
Mat black finish
Mat black finish
Operating instructions (1)
Operating instructions (1)
Operating instructions (1)
Holder clip (1)
Holder clip (1)
Wind screen (1)
Wind screen (1)
Wind screen (1)
ECM-121BMP/122BMP
Electret condenser
100 to 10,000 Hz
Omni-directional
-41 dB (8.9 mV)
ECM-166BMP
Electret condenser
100 to 10,000 Hz
Uni-directional
-44 dB (6.3 mV) ±3 dB
2.5 kΩ ±30 % at 1 kHz, unbalanced
2.5 kΩ ±30 % at 1 kHz, unbalanced
0.2 m (7 7/8 inches) /1.2 m (3.9 feet)
1.2 m (3.9 feet)
3.5 mm (5/32 inch) dia. 3-pole mini phone plug with lock mechanism
8.5 mm dia. x 17 mm
12.5 mm dia. x 23.5 mm
(11/32 inch dia. x 11/16 inch)
(1/2 inch dia. x 15/16 inch)
Approx. 3 g (0.11 oz)
Approx. 3.5 g (0.12 oz)
Mat black finish
Mat black finish
Operating instructions (1)
Operating instructions (1)
Holder clip (1)
Holder clip (1)
Wind screen (1)
Wind screen (1)
GC-0.7MP
More than 1 MΩ
3.5 mm (5/32 inch) dia. 3-pole mini phone plug with lock mechanism (for transmitter)
6.5 mm (1/4 inch) dia. phone plug (for guitar)
0.7 mm (2.3 feet)
Approx. 70 g (2.47 oz)
Optional Accessories
ECM-310BMP Electret Condenser Microphone
WD-820A UHF Antenna Divider
• Headset-style microphone
• Wide cardioid capsule
• Lightweight, with flexible
microphone positioning for
optimum voice pick-up
• 3-pole mini plug with a lock
mechanism for secure cable
clamping
ECM-44BMP Electret Condenser Microphone
• Up to four diversity distribution
outputs
• Connection of up to four
antennas
• DC 9 V power supply for the
AN-820A UHF Antenna
• Cascade connection
AN-820A UHF Antenna
• Omni-directional
• High sound quality
• 3-pole mini plug with a lock
mechanism for secure cable
clamping
• Mic head: 8.5 mm (11/32 inch)
dia. x 14.5 mm (19/32 inch)
ECM-77BMP Electret Condenser Microphone
• Built-in amplifier for signal compensation. 10 dB gain to compensate
for cable loss.
• External powering from the WRRMB-806A or WD-820A via coaxial
cable
• Used in pairs for diversity reception
• LED for power indication
• Easy installation on a wall or in a
microphone stand with the supplied
adaptor
GC-0.7MP Guitar Cable
• Omni-directional
• Superior sound quality – leader
in the Sony ECM lavalier
microphone series
• 3-pole mini plug with a lock
mechanism for secure cable
clamping
• Mic head: 5.6 mm (1/4 inch)
dia. X 12.5 mm (1/2 inch)
ECM-121BMP/122BMP Electret Condenser Microphone
• Use with WRT-805A Body Pack
Transmitter
• Special active guitar cable for
high quality reproduction of
guitar sound
• 3-pole mini plug with a lock
mechanism for secure cable
clamping
• Cable 5.5 mm (7/32 inches) dia.
x 0.7 m (2.3 feet) long
LCS-T805 Soft Case
• Omni-directional
• 3-pole mini plug with a lock
mechanism for secure cable
clamping
• Mic head: 8.5 mm (11/32 inch)
dia. x 17 mm (11/16 inch)
• Mic cable length: ECM-121BMP
= 0.2 m (7 7/8 inches),
ECM-122BMP = 1.2 m (3.9
feet)
ECM-166BMP Electret Condenser Microphone
• Uni-directional
• 3-pole mini plug with a lock
mechanism for secure cable
clamping
• Mic head: 12.5 (1/2 inch) dia. X
23.5 mm (15/16 inch)
• Holding WRT-805A UHF
Synthesized Body Pack
Transmitter to be attached to a
guitar strap
• Guitar strap width: 15 mm
(19/32 inch) to 70 mm (2 7/8
inches)
SC-M800 Carrying Case
• Compact and lightweight
polypropylene case
• Capacity to hold: WRT-805A,
WRT-807A, WRR-802A, lavalier
microphones and accessories
• Dimensions: 460 (W) x 390 (H) x
90 (D) mm (18 1/8 x 15 3/8 x 3
5/8 inches)
• Mass: 1.4 kg (3 lb 1.38 oz)
Note: Use of Sony wireless devices is regulated by the Federal Communications.
Commission as described in Part 15 and 74 of the FCC regulation and users authorized thereby are required to obtain an appropriate license.
© 1999 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony is a registered trademark of Sony Corporation.
Freedom is a trademark of Sony Corporation.
Distributed by
MK7315V1OHB99MAR
Printed in Japan