2001 Catalog - Pages 241-280

SECTION 7 SURVEILLANCE PRODUCTS
1. Video cameras
1-1. Color video cameras
SSC-CX34 ....................................................242
SSC-DC50A/DC54A .....................................243
SSC-DC330/DC334 ......................................244
SSC-DC10/DC14 ..........................................245
SSC-C104.....................................................246
SSC-C370/C374 ...........................................247
1-2. Monochrome video cameras
SSC-MX34 ....................................................248
SSC-M370/M374 ..........................................249
SSC-M320/M324 ..........................................250
SPT-M124.....................................................251
1-3. Camera accessories .....................................252
1-4. Lenses ..........................................................254
2. Monitors
2-1. Color monitors
SSM-20N5U..................................................255
SSM-14N5U..................................................256
SSM-8040 .....................................................257
2-2. Monochrome monitors
SSM-Q177 ....................................................258
SSM-175A.....................................................259
SSM-125 .......................................................260
SSM-930 .......................................................261
4. Quad Switcher
YS-Q440 .......................................................263
5. Multiplexers
YS-DX516/DX416 .........................................264
6. Time lapse video recorders
6-1. Time lapse video recorders
SVT-S3100 ...................................................265
SVT-5050......................................................266
SVT-168........................................................267
SVT-LC300 ...................................................268
SVT-124........................................................269
SVT-168E .....................................................270
SVT-40E .......................................................271
SVT-DL224 ...................................................272
6-2. Time lapse video recorder accessories ........273
7. Digital surveillance recorder
7-1. Digital surveillance recorder
HSR-1/HSR-2 ...............................................274
7-2. Digital surveillance recorder accessories .....275
8. Video transmitter
8-1. Video transmitter
RSE-500/400 ................................................276
8-2. Video transmitter accessory .........................277
9. Automotive camera/monitor
9-1. Automotive monochrome video camera
SSC-530AM ..................................................278
9-2. Automotive monochrome video monitor
SSM-721AMR ...............................................279
–241–
SURVEILLANCE
PRODUCTS
3. Switchers
YS-S6............................................................262
1-1 Color video cameras
SSC-CX34
Built-in Zoom Lens Color Video Camera
•Especially designed for surveillance applications •Built-in
12x switchable motorized/auto iris zoom lens with
zoom/focus preset capabilities •The lens zoom, focus and
iris functions can be remotely controlled from an external
controller/receiver (Lens control voltage, ±6 V or ±12 V is
selectable) •Digitally-controlled Smart Control function
provides intelligent and flexible automatic backlight
compensation •High density 1/3-inch IT Hyper HAD CCD
offers a high resolution of 470 TV lines and high sensitivity
with a minimum illumination of 4.5 lx (F1.8) •Excellent
signal-to-noise ratio of 50 dB •Extra gain with Turbo AGC
function, providing 6 dB more gain than conventional AGC
•Aperture/Sharp mode makes object outlines sharper in the
reproduced picture •Three alternative automatic white
balance control modes : AWB (Auto White Balance) by one
push/ATW (Auto Tracing White Balance)/ATWpro
•New ATWpro mode ensures reliable white balance control
based on the absolute color temperature of the object (The
effective operational color range is 2500 K to 6000 K)
•External synchronization with AC Line Lock
Supplied Accessories:
Tripod adaptor (1)
Lens control cable (1)
Operation manual (1)
Front panel
Image device:
Picture elements:
Sensing area:
Scanning system:
Sync system:
Phase control:
Horizontal resolution:
Lens mount:
Minimum illumination:
1/3-inch Interline Transfer Hyper HAD CCD
768 (H) × 494 (V)
4.4 × 3.3 mm
525 lines, 2:1 interlace
Internal or external with AC line lock
V phase adjustment (±90 ˚)
470 TV lines
Built-in 12x zoom lens
AGC ON (TURBO mode)
2.4 lx at F1.8 (30 IRE) *
4.5 lx at F1.8 (50 IRE)
15 lx at F1.8 (100 IRE)
Aperture control:
SHARP/NORMAL switchable
Enhancer:
3H
Automatic gain control (AGC):
TURBO/NORMAL/OFF switchable
White balance:
ATWpro/ATW/AWB (one-push) switchable
Backlight compensation:Smart control (BLC ON/OFF switchable)
Signal-to-noise ratio:
50 dB (Weight ON, AGC OFF)
Video out:
BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 ˚C to 50 ˚C (14 ˚F to 122 ˚F)
Storage temperature: -40 ˚C to 60 ˚C (-40 ˚F to 140 ˚F)
Power requirements:
AC 24 V, 60 Hz
Power consumption:
4.8 W
Mass:
520 g (1 lb 2 oz)
Connectors:
AC 24 V terminals, LENS CONTROL (Mini DIN 8pin), VIDEO OUT (BNC), GND
Dimensions
60(23/8)
72(27/8)
129.5(51/8)
72(27/8)
9(3/8)
COLOR VIDEO CAMERA
60(23/8)
60(23/8)
SURVEILLANCE
PRODUCTS
Specifications
140.2(55/8)
Unit: mm (inch)
* Equivalent with 1.1 lx at F1.2 fixed lens (30 IRE)
–242–
Rear panel
1-1 Color video cameras
SSC-DC50A/DC54A
CCD Color Video Camera
•Especially designed for surveillance applications •High
density 1/2 type IT CCD •Exwave HAD™ technology offers
excellent sensitivity with a minimum illumination of 0.8 lx
(F1.2), very low smear, and high resolution of 470 TV lines
•Digitally-controlled Smart Control function provides
intelligent and flexible automatic backlight compensation
•For faster backlight compensation, the detection area can
be preset •Excellent signal-to-noise ratio of 50 dB •Y/C
output capability •Extra gain with Turbo AGC function,
providing 6 dB more gain than conventional AGC
•Aperture/Sharp Mode makes object outlines sharper in the
reproduced picture •Four alternative white balance control
modes : AWB (Auto White Balance) by one push / ATW
(Auto Tracing White Balance) / ATWpro / 5600 K •New
ATWpro mode ensures reliable white balance control based
on the absolute color temperature of the object (The
effective operational color range is 2500 K to 6000 K)
•Variable speed electronic shutter •Accepts 2 types of auto
iris lenses (DC servo type/Video servo type) •Accepts
C/CS-mount lenses
Lens is optional
Exclusive features for SSC-DC50A
•External synchronization with VBS or VS •Single cable
operation (video/sync/power triple multiplex transmission) for
easy installation with the optional YS-W150/W250 Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)
SSC-DC50A
SSC-DC54A
•External synchronization with VBS, VS or AC line lock •AC
24 V power operation
Specifications
Image device:
Picture elements:
Sensing area:
Scanning system:
Sync system:
BNC: 1.0 Vp-p, 75 Ω, sync negative
Y/C: Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Operating temperature: -10 to 50°C (14 to 122°F)
Storage temperature: -40 to 60°C (-40 to 140°F)
Power requirements:
DC50A: 1) Multiplexing with YS-W150/W250
2) DC 12 V from DC 12 V power supply
DC54A: AC 24 V, 50 Hz
Power consumption:
DC50A: 1) 5.5 W supplied from YS-W150/W250
2) 4.5 W at DC 12 V
DC54A: 6.0 W
Mass:
600g (1 lb 5 oz)
Auto iris type:
DC/VIDEO servo type
Connectors:
DC50A: DC 12 V terminals, LENS (4-pin), Mode A
(Triple multiplexing operation): DC IN/VS IN/VIDEO
OUT (BNC), MONITOR OUT (BNC), S-VIDEO OUT
(Mini DIN 4-pin)
Mode B (DC 12 V operation):VIDEO OUT (BNC),
VBS/VS IN (BNC), S-VIDEO OUT (Mini DIN 4-pin)
DC54A: AC 24 V terminals, LENS (4-pin), VBS/VS IN
(BNC),VIDEO OUT (BNC), S-VIDEO OUT (Mini DIN
4-pin), GND
Video out:
YS-W150, YS-W250
(for SSC-DC50A only)
Aspherical auto iris lens VCL-3ADXEA (3.8 mm, F0.8)
Auto iris lens
VCL-S03XEA (3.6 mm, F1.6)
VCL-S06XEA (6.0 mm, F1.2)
VCL-S12XEA (12 mm, F1.2)
Manual iris lens
VCL-S03XM (3.6 mm, F1.6)
VCL-S06XM (6.0 mm, F1.2)
1/2-inch Interline Transfer Exwave HAD CCD
752 (H) × 582 (V)
6.3 × 4.7 mm
625 lines, 2:1 interlace
DC50A : Internal or external with VBS/VS or MPX-VS
DC54A : Internal or external with VBS/VS or AC line
lock
Phase control:
H/SC phase adjustment
(H phase: ±0.12H, SC phase: 360° with 0/180°
switch)
V phase adjustment (±90°) for AC line lock
(SSC-DC54A only)
Horizontal resolution:
470 TV lines
Lens mount:
C/CS-mount adjustable
Minimum illumination: AGC ON (TURBO mode)
0.4 lx at F1.2 (30 IRE)
0.8 lx at F1.2 (50 IRE)
3.0 lx at F1.2 (100 IRE)
Aperture control:
SHARP/NORMAL switchable
Automatic gain control (AGC):
TURBO/NORMAL/OFF switchable
Electronic shutter:
1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 (seconds)
CCD IRIS control:
ON/OFF switchable, 1/50 to 1/100000 (seconds)
White balance:
ATWpro/ATW/AWB (one-push)/5600 K switchable
Backlight compensation:Smart Control (BLC ON/OFF switchable, eight AE
spot is selectable)
Signal-to-noise ratio:
50 dB (Weight ON, AGC OFF)
Dimensions
49 (1 15/16)
9 (3/8)
Optional accessories:
Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Camera adaptor
64 (2 5/8)
C
Digital
CS
–243–
10.2 (13/32)
137 (5 1/2)
CS
57 (2 1/4)
Supplied Accessories:
C
SURVEILLANCE
PRODUCTS
Exclusive features for SSC-DC54A
1-1 Color video cameras
SSC-DC330/DC334
CCD color video camera
•Especially designed for surveillance applications •1/3 type IT
HAD CCD •Exwave HAD technology offers extremely high
sensitivity with a minimum illumination of 0.8 lx (F1.2) and
high horizontal resolution of 480 TV lines •Excellent signal-tonoise ratio of more than 50 dB •Digital control Smart Control
function executes the intelligent and flexible automatic
backlight compensation •Turbo AGC raises sensitivity by
automatically controlling video gain in a range that is 6 dB
wider than the normal AGC range •Aperture/Sharp Mode
makes object outlines sharper in the reproduced picture
•CCD IRIS function allows use of inexpensive manual iris
lenses •Two alternative automatic white balance control
modes: ATW (Auto Tracing White Balance)/ATW pro
•Accepts 2 types of auto iris lenses (DC servo type/Video
servo type) •Accepts both CS and C-mount lenses
SSC-DC330
SSC-DC334
Exclusive features for SSC-DC330
•External synchronization with VBS or VS oSingle cable
operation (video/sync/power triple multiplex transmission) for
easy installation with the optional YS-W150/W250 Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)
Exclusive features for SSC-DC334
•External synchronization with AC line lock o AC 24 V power
operation
Lens connector
Lens mount cap
Operating instruction manual
SSC-DC330
SSC-DC334
Specifications
Image device:
Picture elements:
Sensing area:
Video signal system:
Scanning system:
Sync system:
1/3-type Interline Transfer HAD CCD
768 (H) × 494 (V)
3.3 mm × 4.4 mm
NTSC standard
525 lines, 2:1 interlace
SSC-DC330: Internal or external with VS/VBS*
SSC-DC334: Internal or external with AC line lock
Horizontal resolution:
480 TV lines
Lens mount:
C/CS-mount (Back focus adjustable)
Minimum illumination: AGC ON (TURBO mode)
0.4 lx at F1.2 (30 IRE)
0.8 lx at F1.2 (50 IRE)
6.5 lx at F1.2 (100 IRE)
Aperture:
SHARP/NORMAL switchable
Automatic Gain Control: TURBO/NORMAL/OFF switchable
Phase control:
SSC-DC330: H phase adjustment (+/-0.25H)
SSC-DC334: V-phase adjustment (±90°)
CCD IRIS control:
ON/OFF switchable, 1/60 to 1/100000 s
White balance:
ATW pro/ATW switchable
Backlight compensation:Smart Control
Signal-to-noise ratio:
More than 50 dB (Weight ON, AGC OFF)
Video out:
1.0 Vp-p, 75Ω, sync negative
Operating temperature: –10 to 50°C (14 to 122°F)
Storage temperature: –40 to 60°C (–40 to 140°F)
Power requirements:
Power consumption:
Mass:
Auto iris lens:
Connectors:
9 (3/8)
9 (3/8)
SSC-DC334
49 (1 15/16)
CS
57 (2 1/4)
C
CS
DC330: 1) Multiplexing with YS-W150/W250
2) 12 V DC V from DC 12 V power supply
DC334: AC 24 V, 60 Hz
DC330: 5.0 W supplied from YS-W150/W250
3.0 W at 12 V
DC334: 4.5 W
DC330: 430 g (15 oz)
DC334: 550 g (1 lb 3 oz)
DC/VIDEO servo type
DC330: DC 12 V terminals
LENS (4-pin)
Mode A (Triple multiplexing operation): DC
IN/VS IN/VIDEO OUT (BNC), MONITOR
OUT (BNC)
Mode B (DC 12 V operation): VS IN/VIDEO
OUT (BNC)
DC334: VIDEO OUT (BNC), LENS (4-pin), AC 24 V
terminal, GND
* The burst signal is not locked
Dimensions:
SSC-DC330
57 (2 1/4)
SURVEILLANCE
PRODUCTS
Supplied accessories:
C
CS
C
70 (2 7/8)
54.5 (2 1/4)
110 (4 3/8)
121.2
CS
C
70 (2 7/8)
130 (5 1/8)
141 (5 5/8)
(4 7/8)
–244–
1-1 Color video cameras
SSC-DC10/DC14
CCD Color Video Camera
•Especially designed for surveillance applications •Digitallycontrolled Smart Control function provides intelligent and
flexible automatic backlight compensation •High density
1/3-inch IT Hyper HAD CCD offers a high resolution of 470
TV lines and high sensitivity with a minimum illumination of
1.7 lx (F1.2)* •Excellent signal-to-noise ratio of 50 dB •Extra
gain with Turbo AGC function, providing 6 dB more gain
than conventional AGC •Aperture/Sharp mode makes object
outlines sharper in the reproduced picture •Two alternative
automatic white balance control modes : AWB (Auto White
Balance)/ATWpro •New ATWpro mode ensures reliable
white balance control based on the absolute color
temperature of the object (The effective operational color
range is 2500 K to 6000 K) •Accepts 2 types of auto iris
lenses (DC servo type/Video servo type) •Accepts
C/CS-mount lenses
SSC-DC10
SSC-DC14
Lenses are optional
Exclusive features for SSC-DC10
•External synchronization with VS •Single cable operation
(video/sync/power triple multiplex transmission) for easy
installation with the optional YS-W150/W250 Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)
Auto iris type:
Connectors:
Exclusive features for SSC-DC14
DC/VIDEO servo type
DC10 : DC 12 V terminals, LENS (4-pin)
Mode A (Triple multiplexing operation):DC IN/VS
IN/VIDEO OUT (BNC), MONITOR OUT (BNC)
Mode B (DC 12 V operation):VIDEO OUT (BNC), VS
IN (BNC)
DC14 : AC 24 V terminals, LENS (4-pin), VIDEO
OUT (BNC), GND
•External synchronization with AC line lock •AC power
operation: AC 24 V, 60 Hz
Optional Accessories:
Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Camera adaptor (for SSC-DC10 only) YS-W150,
YS-W250
Auto iris lens: VCL-4V8WEA (3.5 to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.3)
VCL-3ADXEA (3.8 mm, F0.8)
Dimensions
1/4" UNC (20 pitch)
SSC-DC10
Specifications
9 (3⁄8)
SSC-DC10/DC14
1/3-inch Interline Transfer Hyper HAD CCD
768 (H) × 494 (V)
4.4 × 3.3 mm
525 lines, 2:1 interlace
DC10: Internal or external with VS/VBS* or MPX-VS
DC14: Internal or external with AC line lock
Phase control:
DC10: H phase adjustment (±0.25H)
DC14: V phase adjustment (±90 ˚)
Horizontal resolution:
470 TV lines
Lens mount:
C/CS-mount adjustable
Minimum illumination: AGC ON (TURBO mode)
1.1 lx at F1.2 (30 IRE)**
1.7 lx at F1.2 (50 IRE)
10 lx at F1.2 (100 IRE)
Aperture control:
SHARP/NORMAL switchable
Enhancer:
3H
Automatic gain control (AGC):
TURBO/NORMAL/OFF switchable
CCD IRIS control:
ON/OFF switchable, 1/60 to 1/100000 (seconds)
White balance:
ATWpro/ATW switchable
Backlight compensation:Smart Control (BLC ON/OFF switchable)
Signal-to-noise ratio:
50 dB (Weight ON, AGC OFF)
Video out:
BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 ˚C to 50 ˚C (14 ˚F to 122 ˚F)
Storage temperature: -40 ˚C to 60 ˚C (-40 ˚F to 140 ˚F)
Power requirements:
DC10: 1) Multiplexing with YS-W150/W250
2) DC 12 V from DC 12 V power supply
DC14: AC 24 V, 60 Hz
Power consumption:
DC10: 1) 4.0 W supplied from YS-W150/W250
2) 3.0 W at DC 12 V
DC14 : 4.5 W
Mass:
DC10 : 430 g (15 oz)
DC14 : 550 g (1 lb 3 oz)
32 (15⁄16)
49
M2x4
(115⁄16)
Digital
57 (21⁄4)
Image device:
Picture elements:
Sensing area:
Scanning system:
Sync system:
SURVEILLANCE
PRODUCTS
Supplied Accessories:
110 (43⁄8)
70 (27⁄8)
121.2 (47⁄8)
1/4" UNC (20 pitch)
SSC-DC14
32 (15⁄16)
M2x4
53 (21⁄8)
Digital
130 (51⁄8)
141 (55⁄8)
Unit: mm (inch)
* The burst signal is not locked.
** These specifications apply to all SSC-DC10 units and to SSC-DC14 units from serial number 104,011 onwards.
The SSC-DC14 units with serial numbers lower than those have the following minimum illumination performance.
1.2 lx at F1.2 (30 IRE, Turbo ACG ON)
1.9 lx at F1.2 (50 IRE, Turbo ACG ON)
13 lx at F1.2 (100 IRE, Turbo ACG ON)
–245–
1-1 Color video cameras
SSC-C104
CCD color video camera
•Especially designed for surveillance applications •1/3-inch
IT Hyper HAD CCD offers extremely high sensitivity with a
minimum illumination of 1.0 lx (F1.2) •Excellent signal-tonoise ratio of 52 dB •Automatic backlight compensation
•Turbo AGC function provides extra gain for low light
conditions •CCD IRIS function allows use of inexpensive
manual iris lenses •ATW (Auto Tracing White Balance)
control for white balance adjustment •Accepts 2 types of
auto iris lenses (DC servo type/Video servo type) •Accepts
C/CS-mount lenses •External synchronization with AC line
lock •AC power operation: AC 24 V, 60 Hz
Supplied accessories:
Optional accessories:
Lens is optional
Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Auto iris lens VCL-4V8WEA (3.5 to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.3)
VCL-3ADXEA (3.8 mm, F0.8)
1/3-inch Interline Transfer Hyper HAD CCD
510 (H) × 492 (V)
4.4 × 3.3 mm
525 lines, 2:1 interlace
External with AC line lock
V phase adjustment (±90˚)
330 TV lines
C/CS-mount ajustable
AGC ON (TURBO mode) 0.9 lx at F1.2
3H
TURBO/NORMAL/OFF switchable
ON/OFF switchable, 1/60 to 1/100000 (seconds)
ATW
BLC ON/OFF switchable
52 dB (Weight ON, AGC OFF)
BNC 1.0 Vp-p, 75 Ω, sync negative
–10 to 50˚C (14 to 122˚F )
–40 to 60˚C (–40 to 140˚ F )
AC 24 V, 60 Hz
3.5 W
550 g (1 lb 2 oz)
DC/VIDEO servo type
AC 24 V terminals, LENS (4-pin), VIDEO OUT
(BNC), GND
Dimensions
1/4" UNC (20pitch)
32 (15⁄16)
9 (3⁄8)
Image device:
Picture elements:
Sensing area:
Scanning system:
Sync system:
Phase control:
Horizontal resolution:
Lens mount:
Minimum illumination:
Enhancer:
Automatic Gain Control:
CCD IRIS control:
White balance:
Backlight compensation:
Signal-to-noise ratio:
Video out:
Operating temperature:
Storage temperature:
Power requirements:
Power consumption:
Mass:
Auto iris lens:
Connectors:
M2x4
53 (21⁄8)
57 (21⁄4)
SURVEILLANCE
PRODUCTS
Specifications
70 (27⁄8)
130 (51⁄8)
141 (55⁄8)
Unit: mm (inch)
–246–
1-1 Color video cameras
SSC-C370/C374
CCD Color Video Camera
•Especially designed for surveillance applications •High
density 1/2-inch IT Hyper HAD CCD offers a high resolution
of 470 TV lines and high sensitivity with a minimum
illumination of 2.5 lx (F1.2) •Excellent signal-to-noise ratio of
48 dB •CCD IRIS function allows use of inexpensive manual
iris lenses •Two alternative automatic white balance control
modes: AWB (Auto White Balance)/ATW (Auto Tracing
White Balance) •Variable speed electronic shutter •Accepts
C-mount lenses
Lens is optional
Exclusive features for SSC-C370
•External synchronization with VS •Single cable operation
(video/sync/power triple multiplex transmission) for easy
installation with the optional YS-W150/W250 Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)
Exclusive features for SSC-C374
•External synchronization with VS or AC line lock •AC power
operation: AC 24 V, 60 Hz
Optional Accessories:
Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Camera adaptor (for SSC-C370 only) YS-W150,
YS-W250
Manual iris lens VCL-S03XM (3.6 mm, F1.6)
VCL-S06XM (6.0 mm, F1.2)
VCL-S12XM (12 mm, F1.2)
Auto iris lens
VCL-S03XEA (3.6 mm, F1.6)
VCL-S06XEA (6.0 mm, F1.2)
VCL-S12XEA (12 mm, F1.2)
SSC-C370
SSC-C374
SURVEILLANCE
PRODUCTS
Supplied Accessories:
Specifications
Image device:
Picture elements:
Sensing area:
Scanning system:
Sync system:
* The burst signal is not locked
** Flickerless mode
–247–
64 (25⁄8)
Dimensions
40.5 (15⁄8)
155 (61⁄8)
164.9 (61⁄2)
57 (21⁄4)
1/2-inch Interline Transfer Hyper HAD CCD
768 (H) × 494 (V)
6.3 × 4.7 mm
525 lines, 2:1 interlace
C370 : Internal or external with VS/VBS* or MPX-VS
C374 : Internal or external with AC line lock
Phase control:
C370 : H phase adjustment
C374 : V phase adjustment (6-position)
Horizontal resolution:
470 TV lines
Lens mount:
C-mount
Minimum illumination: AGC ON
2.5 lx at F1.2
Enhancer:
3H
Automatic gain control (AGC):
ON/OFF switchable
Electronic shutter:
1/60, 1/100**, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 (seconds)
CCD IRIS control:
ON/OFF switchable, 1/60 to 1/100000 (seconds)
White balance:
ATW/AWB switchable
Signal-to-noise ratio:
48 dB (AGC OFF)
Video out:
BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 ˚C to 50 ˚C (14 ˚F to 122 ˚F)
Storage temperature: -40 ˚C to 60 ˚C (-40 ˚F to 140 ˚F)
Power requirements:
C370: 1) Multiplexing with YS-W150/W250
2) DC 12 V from DC 12 V power supply
C374: AC 24 V, 60 Hz
Power consumption:
C370: 1) 4.0 W supplied from YS-W150/W250
2) 2.8 W at DC 12 V
C374 : 4.9 W at AC 24 V
Mass:
660 g (1 lb 7 oz)
Auto iris type:
VIDEO servo type
Connectors:
C370: DC 12 V terminals, LENS (4-pin)
Mode A (Triple multiplexing operation): DC IN/VS
IN/VIDEO OUT (BNC), MONITOR OUT (BNC)
Mode B (DC 12V operation): VIDEO OUT (BNC), VS
IN (BNC)
C374: AC 24 V terminals, LENS (4-pin), VIDEO OUT
(BNC), GND
Unit: mm (inch)
1-2 Monochrome video cameras
SSC-MX34
Built-in Zoom Lens B/W Video Camera
•Especially designed for surveillance applications •Built-in
12x switchable motorized/auto iris zoom lens with
zoom/focus preset capabilities •The lens zoom, focus and
iris function can be remotely controlled from an external
controller/receiver (Lens control voltage, ±6 V or ±12 V is
selectable) •Digitally-controlled Smart Control function
provides intelligent and flexible automatic backlight
compensation •High density 1/3-inch IT Hyper HAD CCD
offers a high resolution of 570 TV lines and high sensitivity
with a minimum illumination of 0.4 lx at F1.8 (50 IRE) •One
push Focus Lock •Excellent signal-to-noise ratio of 50 dB
•Extra gain with Turbo AGC function, providing 6 dB more
gain than conventional AGC •Aperture/Sharp Mode makes
object outlines sharper in the reproduced picture •Three
alternative automatic white balance control modes : AWB
(Auto White Balance) by one push/ ATW (Auto Tracing
White Balance) / ATWpro •New ATWpro mode ensures
reliable white balance control based on the absolute color
temperature of the object (The effective operational color
range is 2500 K to 6000 K)
Supplied accessories:
Tripod adaptor (1)
Lens control cable (1)
Operation manual (1)
Image device:
Picture elements:
Sensing area:
Signal system:
Scanning system:
Sync system:
Phase control:
Horizontal resolution:
Minimum illumination:
1/3-inch Interline Transfer Hyper HAD CCD
768 (H) × 494 (V)
4.4 × 3.3 mm
EIA standard
525 lines, 2:1 interlace
Internal or external with AC line lock
V phase adjustment (±90°)
570 TV lines
AGC ON (TURBO mode)
0.2 lx at F1.8 (30 IRE)
0.4 lx at F1.8 (50 IRE), equivilant to 0.18 lx at F1.2
2.0 lx at F1.8 (100 IRE)
Aperture control:
SHARP/NORMAL switchable
Automatic Gain Control: TURBO/NORMAL/OFF switchable
Backlight compensation:FULL/SPOT/OFF switchable
Signal-to-noise ratio:
50 dB (Weight ON, AGC OFF)
Video out:
1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 to 50°C (14 to 122°F)
Storage temperature: -40 to 60°C (-40 to 140°F)
Power requirements:
AC 24 V, 60 Hz
Power consumption:
5.1 W
Mass:
520 g (1 lb 2 oz)
Connectors:
AC 24 V terminals, LENS CONTROL
(Mini DIN 8-pin), VIDEO OUT (BNC), GND
Dimensions
129.5 (5 1/8)
60 (2 3/8)
72 (2 7/8)
OPTICAL
ZOOM
12X
9 (3/8)
60 (2 3/8)
72 (2 7/8)
60 (2 3/8)
SURVEILLANCE
PRODUCTS
Specifications
Digital
140.2 (5 5/8)
–248–
1-2 Monochrome video cameras
SSC-M370/M374
CCD B/W Video Camera
•Especially designed for surveillance applications •High
density 1/2-inch IT Hyper HAD CCD offers extremely high
resolution of 570 TV lines and high sensitivity with a
minimum illumination of 0.3 lx (F1.2) •Excellent signal-tonoise ratio of 50 dB •CCD IRIS function allows use of
inexpensive manual iris lenses •Variable speed electronic
shutter •Accepts C-mount lenses
Exclusive features for SSC-M370
•External synchronization with VS •Single cable operation
(video/sync/power triple multiplex transmission) for easy
installation with the optional YS-W150/W250 Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)
Lens is optional
Exclusive features for SSC-M374
•External synchronization with AC line lock •AC power
operation : AC 24 V, 60Hz
Supplied Accessories
Optional Accessories
Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Camera adaptor (for SSC-M370 only) YS-W150,
YS-W250
Manual iris lens VCL-S03XM (3.6 mm, F1.6)
VCL-S06XM (6.0 mm, F1.2)
VCL-S12XM (12 mm, F1.2)
Auto iris lens
VCL-S03XEA (3.6 mm, F1.6)
VCL-S06XEA (6.0 mm, F1.2)
VCL-S12XEA (12 mm, F1.2)
SSC-M370
SSC-M374
Specifications
* The burst signal is not locked
** Flickerless mode
–249–
64 (25⁄8)
Dimensions
40.5 (15⁄8)
155 (61⁄8)
164.9 (61⁄2)
57 (21⁄4)
1/2-inch Interline Transfer Hyper HAD CCD
768 (H) × 494 (V)
6.3 × 4.7 mm
525 lines, 2:1 interlace
M370: Internal or external with VS/VBS* or MPX-VS
M374: Internal or external with AC line lock
Phase control:
M370: H phase adjustment
M374: V phase adjustment (6-position)
Horizontal resolution:
570 TV lines
Lens mount:
C-mount
Minimum illumination: AGC ON
0.3 lx at F1.2
Automatic gain control (AGC):
ON/OFF switchable
Electronic shutter:
1/60, 1/100**, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 (seconds)
CCD IRIS control:
ON/OFF switchable
White balance:
ATW/AWB switchable
Signal-to-noise ratio:
50 dB (AGC OFF)
Video out:
BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 ˚C to 50 ˚C (14 ˚F to 122 ˚F)
Storage temperature: -40 ˚C to 60 ˚C (-40 ˚F to 140 ˚F)
Power requirements:
M370: 1) Multiplexing with YS-W150/W250
2) DC 12 V from DC 12 V power supply
M374: AC 24 V, 60 Hz
Power consumption:
M370: 1) 4.0 W supplied from YS-W150/W250
2) 2.8 W at DC 12 V
M374 : 3.9 W at AC 24 V
Mass:
660 g (1 lb 7 oz)
Auto iris type:
VIDEO servo type
Connectors:
M370 : DC 12 V terminals, LENS (4-pin)
Mode A (Triple multiplexing operation): DC IN/VS
IN/VIDEO OUT (BNC), MONITOR OUT (BNC)
Mode B (DC 12V operation): VIDEO OUT (BNC), VS
IN (BNC)
M374: AC 24 V terminals, LENS (4-pin), VIDEO OUT
(BNC), GND
SURVEILLANCE
PRODUCTS
Image device:
Picture elements:
Sensing area:
Scanning system:
Sync system:
Unit: mm (inch)
1-2 Monochrome video cameras
SPT-M320/M324
CCD monochrome video cameras
•Especially designed for surveillance applications •1/3 type
HAD CCD •Exwave HAD technology offers extremely high
sensitivity with a minimum illumination of 0.07 lx (F1.2)
•Outstanding horizontal resolution of 570 TV lines •CCD
IRIS function allows use of inexpensive manual iris lenses
•Backlight compensation is possible with the LEVEL and
BLC volume controls (only when using auto iris lenses or the
CCD IRIS function) •DC servo circuit drives auto iris facility
•Accepts C or CS-mount lenses
SPT-M320
Exclusive features of SPT-M320
•External synchronization with VS •Single cable operation
(video/sync/power triple multiplex transmission) for easy
installation with the optional YS-W150/W250 camera
adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode B) •12 V DC power supply can
also be used (Mode B)
SPT-M324
Exclusive features of SPT-M324
•External synchronization with VS or AC Line Lock
•AC 24 V power operation
Supplied accessories:
Lens connector
Lens mount cap
Operating instruction manual
SPT-M320
SPT-M324
Image device:
Picture elements:
Sensing area:
Video signal system:
Scanning system:
Sync system:
1/3-type Interline Transfer HAD CCD
768 (H) × 494 (V)
3.3 mm × 4.4 mm
EIA standard
525 lines, 2:1 interlace
SPT-M320: Internal or external with VS or MPX-VS
SPT-M324: External with AC line lock
Horizontal resolution:
570 TV lines
Lens mount:
C/CS-mount (Back focus adjustable)
Minimum illumination: AGC ON 0.04 lx at F1.2 (30 IRE)
AGC ON 0.07 lx at F1.2 (50 IRE)
AGC ON 0.3 lx at F1.2 (100 IRE)
Automatic Gain Control: Turbo AGC permanently ON
Phase control:
V-phase adjustment (±90°)
CCD IRIS:
1/60 to 1/100000 (seconds)
CCD IRIS control:
ON/OFF switchable
Backlight compensation:Adjustable
Signal-to-noise ratio:
More than 50 dB (AGC OFF)
Video out:
BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: –10 to 50°C (14 to 122°F)
Storage temperature: –40 to 60°C (–40 to 140°F)
Power requirements:
M320: 1) Multiplexing with YS-W150/W250
2) 12 V DC V from DC 12 V power supply
M324:
AC 24 V, 60 Hz
Power consumption:
M320: 2.8 W supplied from YS-W150/W250
2.4 W at 12 V
M324:
2.6 W
Mass:
M320: 410 g (14 oz)
M324: 340 g (12 oz)
Auto iris lens:
DC/VIDEO servo type
Connectors:
M320: DC 12 V terminals
LENS (4-pin)
Mode A: DC IN/VS IN/VIDEO OUT (BNC),
MONITOR OUT (BNC)
Mode B: VS IN/VIDEO OUT (BNC)
M324: VIDEO OUT (BNC), LENS (4-pin), AC 24 V
terminal, GND
SPT-M324
7.5 (5/16)
7.5 (5/16)
Dimensions:
SPT-M320
54 (2 1/4)
CS
CS
C
54 (2 1/4)
C
CS
CS
C
50 (2 )
C
50 (2 )
SURVEILLANCE
PRODUCTS
Specifications
57 (2 1/4)
140 (5 5/8)
10.5
(7/16)
–250–
57 (2 1/4)
115 (4 5/8)
10.5
(7/16)
1-2 Monochrome video cameras
SPT-M124
CCD monochrome video camera
•Especially designed for surveillance applications •1/3-inch
IT Hyper HAD CCD •High horizontal resolution of 380 TV
lines •High sensitivity with a minimum illumination of 0.1 lx at
F1.2 (50 IRE) •Excellent signal-to-noise ratio of 45 dB •CCD
IRIS allows the use of inexpensive manual iris lens
•Backlight compensation is possible with the Level and BLC
(Back Light Control) volume controls (when using auto iris
lenses or the CCD IRIS function) •AGC (Automatic Gain
Control) •Accepts both DC servo and VIDEO servo auto iris
lenses •Accepts both CS and C-mount lenses •4-pin auto iris
connector •External synchronization with AC line lock
Supplied accessories:
Optional accessories:
Lens is optional
Lens connector
Lens mount cap
Operating instruction manual
Auto iris lens VCL-4V8WEA (3.5 to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.3)
VCL-3ADXEA (3.8 mm, F0.8)
Specifications
1/3-inch Interline Transfer Hyper HAD CCD
510 (H) × 492 (V)
4.4 × 3.3 mm
EIA standard
525 lines, 2:1 interlace
External with AC line lock
380 TV lines
C/CS-mount (Back focus adjustable)
0.06 lx at F1.2 (30 IRE)
0.1 lx at F1.2 (50 IRE)
0.4 lx at F1.2 (100 IRE)
Automatic Gain Control: Always ON
Phase control:
V-phase control
CCD IRIS control:
ON/OFF switchable, 1/60 to 1/100000 (seconds)
Signal-to-noise ratio:
More than 45 dB (AGC ON)
Video out:
1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 to 50°C (14 to 122°F)
Storage temperature: -40 to 60°C (-40 to 140°F)
Power requirements:
AC 24 V
Power consumption:
2.5 W
Mass:
Approx. 320 g (11 oz)
Auto iris lens:
DC/Video servo type
Connectors:
LENS (4-pin), VIDEO OUT (BNC), AC 24 V
terminals, GND
SURVEILLANCE
PRODUCTS
Image device:
Picture elements:
Sensing area:
Video signal system:
Scanning system:
Sync system:
Horizontal resolution:
Lens mount:
Minimum illumination:
Dimensions
–251–
1-3 Camera accessories
YS-W150
AC adaptor for SSC-DC50A/DC330/DC10/C370/
M370, SPT-M320, DXC-107A
•Power supply and video/sync signal transmission by
connecting to the camera with a single coaxial cable
•Internal or external synchronization with VS or AC line lock
•Extends the cable length up to 600 meters by using
RG-11A/U (7C-2V) coaxial cable
CAMERA IN, BNC (1)
VIDEO OUT, BNC (2)
SYNC IN/OUT (BNC, loop-through, 75 Ω ON/OFF)
Power requirements:
AC 120 V, 60 Hz
Power consumption:
15 W
Operating temperature: –10°C to 50°C (14°F to 122°F)
Maximum cable length: 300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Dimensions:
218 (W) × 52 (H) × 330 (D) mm
(8 3/8 × 2 1/8 × 13 inches)
Mass:
2.8 kg (6 lb 3 oz)
SURVEILLANCE
PRODUCTS
Connectors:
YS-W250
AC adaptor for SSC-DC50A/DC330/DC10/C370/
M370, SPT-M320, DXC-107A
•Power supply and video/sync signal transmission by
connecting to the camera with a single coaxial cable •Up to
four cameras can be connected •Internal or external
synchronization with VS or AC line lock •Extends the cable
length up to 600 meters by using RG-11A/U (7C-2V) coaxial
cable (SSC series camera) or 300 meters with RG-6A/U
(5C-2V) coaxial cable (DXC-107A)
Connectors:
CAMERA IN 1 to 4, BNC (4)
VIDEO OUT A: 1 to 4, BNC (4)
VIDEO OUT B: 1 to 4, BNC (4)
SYNC IN/OUT (BNC, loop-through, 75 Ω ON/OFF)
Power requirements:
AC 120 V, 60 Hz
Power consumption:
48 W
Operating temperature: –10°C to 50°C (14°F to 122°F)
Maximum cable length: 300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Dimensions:
424 (W) × 52 (H) × 330 (D) mm
(16 3/4 × 2 1/8 × 13 inches)
Mass:
3.6 kg (7 lb 15 oz)
–252–
1-3 Camera accessories
Dimensions:
YT-B21
Mounting bracket
ø130 (51/8)
•For indoor use
5.2 (7/32)
(13/16)
30 (turning point)
Maximum load:
Mass:
Mounting screw (×4)
Operating instruction manual
2 kg
200 g
136.6 (51/2)
Supplied accessories:
ø34 (13/8)
Unit: mm (inch)
T-301/305/307
Mounting bracket
•T-301 - Suitable for mounting housed or
unhoused cameras, T-305/307 - Only accept
unhoused cameras for installation
260 mm + 150 mm
Min.275 mm/Max.405 mm
160 mm
0.7 kg
0.6 kg
T-301
T-305
T-307
SURVEILLANCE
PRODUCTS
Maximum load:10 kg
Length:
T-301:
T-305:
T-307:
Mass:
T-301/305:
T-307:
–253–
1-4 Lenses
Lenses for 1/2-inch C-mount cameras
1) Auto-iris Type (Video servo type/EE amplifier type/ALC type)
Models
Mount
Focal length
Iris control
Maximum aperture ratio
Filter size
Mass
Dimensions
Supply voltage
VCL-S03XEA
C
3.6 mm
Auto
1 : 1.6
—
88 g (3.1 oz)
ø45(dia.) × 32.9(L) mm
(113/16 × 15/16 inches)
DC 8 to 16V
VCL-S06XEA
C
6.0 mm
Auto
1 : 1.2
M43 × 0.75 mm
128 g (4.5 oz)
ø45.5(dia.) × 48.5(L) mm
(113/16 × 115/16 inches)
DC 8 to 16V
VCL-S12XEA
C
12 mm
Auto
1 : 1.2
M43 × 0.75 mm
126 g (4.4 oz)
ø45.5(dia.) × 48.5(L) mm
(113/16 × 115/16 inches)
DC 8 to 16V
VCL-S03XM
C
3.6 mm
Manual
1 : 1.6
M35.5 × 0.5 mm
66 g (2.3 oz)
ø38(dia.) × 28.6(L) mm
(11/2 × 13/16 inches)
VCL-S06XM
C
6.0 mm
Manual
1 : 1.2
M35.5 × 0.5 mm
74 g (2.6 oz)
ø38(dia.) × 36.4(L) mm
(11/2 × 17/16 inches)
VCL-S12XM
C
12 mm
Manual
1 : 1.2
M35.5 × 0.5 mm
60 g (2.1 oz)
ø38(dia.) × 30.8(L) mm
(11/2 × 11/4 inches)
2) Manual-iris Type
Models
Mount
Focal length
Iris control
Maximum aperture ratio
Filter size
Mass
SURVEILLANCE
PRODUCTS
Dimensions
Aspherical auto-iris lens for 1/2-inch CS-mount cameras
(DC servo type/ Non-EE amplifier type/ Non-ALC type)
Model
VCL-3ADXEA
Mount
CS
Focal length
3.8 mm
Iris control
Auto
Maximum aperture ratio
1 : 0.8
Minimum object distance
0.15 m
Filter size
M43 × 0.75 mm
Mass
150 g (5.3 oz)
Dimensions
ø45.0 × 56.8 × 52.5 mm
13
(dia. × H × L)
(1 /16 × 21/4 × 21/8 inches)
Cable length
90 mm (3 5/8 inch)
Lenses for 1/3-inch CS-mount camera
1) Auto-iris Type (DC servo type/ Non-EE amplifier type/ Non-ALC type)
Models
VCL-4V8WEA
VCL-S02WEAP
Mount
CS
CS
Focal length
3.5 to 8.0 mm
2.8 mm
Iris control
Auto
Auto
Maximum aperture ratio
1 : 1.4
1 : 1.3
Minimum object distance
0.3 m
0.2 m
Filter size
—
M30.5 × 0.5 mm
Mass
72 g (3 oz)
41 g (1.4 oz)
Dimensions
ø35.0 × 54.0 × 46.0 mm ø32.0 × 39.8 × 33.0 mm
(dia. × H × L)
(17⁄16 × 21⁄4 × 13⁄16 inches) (15⁄16 × 15⁄8 × 15⁄16 inches)
Cable length
100 mm (4 inch)
310 mm (121⁄4 inch)
–254–
2-1 Color monitors
SSM-20N5U (NTSC/PAL/SECAM/NTSC
4.43)
Color monitor
•Trinitron color monitor especially designed for
surveillance applications •High resolution of 500 TV lines
•Adoption of beam current feedback circuit for stability in the
color balance •Accepts composite video and Y/C signals
•Automatic 75 Ω termination facility •On-screen menu for
adjustment/operation •Built-in speaker •EIA standard rack
mountable (with the optional SLR-103A) •Metal cabinet for
high immunity to external electrical and magnetic
interference
Optional accessory:
Slide Rail Kit SLR-103A
Specifications
Color system:
Picture tube:
Horizontal resolution:
Audio power output:
Power requirements:
Power consumption:
Dimensions:
Mass:
VIDEO
LINE*2:
AUDIO
LINE:
EIA 525 lines, 60 fields/CCIR 625 lines, 50 fields
(switching of EIA to CCIR or vice versa is
automatically done)
NTSC/PAL/SECAM/NTSC4.43*1
53 cm (20-inch), HR Trinitron tube, visible picture
size 48.0 cm (min.) (19-inch) measured diagonally,
90° deflection, P-22 phosphors
500 TV lines at center
Monaural, 0.8 W with built-in speaker
AC 100 to 240 V, 50/60 Hz
100 W
449 (W) × 441 (H) × 502 (D) mm
(1711/16 × 173/8 × 193/4 inches)
28 kg (61 lb 11 oz)
Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*3
Loop-through Mini DIN 4-pin
Y (luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*3
C (chrominance):
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*3
PAL: 0.3 Vp-p, Automatic 75 Ω termination*3
Loop-through Phono
–5 dBu, high impedance
*1 The NTSC4.43 system refers to an NTSC color system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
–255–
SURVEILLANCE
PRODUCTS
Video signal system:
2-1 Color monitors
SSM-14N5U (NTSC/PAL/SECAM/NTSC
4.43)
Color monitor
•Trinitron color monitor especially designed for surveillance
applications •High resolution of 500 TV lines •Adoption of
beam current feedback circuit for stability in the color
balance •Accepts composite video and Y/C signals
•Automatic 75 Ω termination facility •On-screen menu for
adjustment/operation •Built-in speaker •EIA standard rack
mountable (with the optional MB-502B and SLR-102) •Metal
cabinet for high immunity to external electrical and magnetic
interference
Optional accessories:
Mounting Bracket MB-502B
Slide Rail Kit (used with the MB-502B) SLR-102
Specifications
Video signal system:
Color system:
Picture tube:
Horizontal resolution:
Audio power output:
Power requirements:
Power consumption:
Dimensions:
SURVEILLANCE
PRODUCTS
Mass:
VIDEO
LINE*2:
AUDIO
LINE:
EIA 525 lines, 60 fields/CCIR 625 lines, 50 fields
(switching of EIA to CCIR or vice versa is
automatically done)
NTSC/PAL/SECAM/NTSC4.43*1
37.1 cm (14-inch), HR Trinitron tube, visible
picture size 33.2 cm (min.) (13-inch) measured
diagonally, 90° deflection, P-22 phosphors
500 TV lines at center
Monaural, 0.8 W with built-in speaker
AC 100 to 240 V, 50/60 Hz
80 W
346 (W) × 340 (H) × 414 (D) mm
(135/8 × 133/8 × 165/16 inches)
15 kg (33 lb 1oz)
Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*3
Loop-through Mini DIN 4-pin
Y (luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*3
C (chrominance):
NTSC: 0.286 Vp-p, Automatic 75 Ω terrmination*3
PAL: 0.3 Vp-p, Automatic 75 Ω termination*3
Loop-through Phono
–5 dBu, high impedance
*1 The NTSC4.43 system refers to an NTSC color system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
–256–
2-1 Color monitors
SSM-8040
Color monitor
•NTSC standard •Trinitron color monitor especially designed
for surveillance applications •Adoption of beam current
feedback circuit for high black level stability •Automatic 75 Ω
termination facility •Front controls: Power, Brightness,
Chroma, Contrast •EIA standard 19-inch rack mountable
(with the optional MB-520 mounting bracket) •Metal cabinet
for high immunity to external electrical and magnetic
interference
Supplied accessory:
Optional accessories:
Operating Instruction Manual
Mounting Panel MB-509
Mounting Bracket MB-520
Specifications
EIA 525 lines, 60 fields
NTSC
22 cm (9-inch) Trinitron tube, visible picture size
19.7 cm (8-inch) measured diagonally, 70° deflection
(AG pitch 0.5 mm)
Resolution:
250 TV lines at center
Frequency response:
6.0 MHz (+1.5dB
–3.0dB)
Aperture correction:
–4.0 dB to +6.0 dB (at 3.0 MHz)
Sync system:
AFC time constant 1.0 ms
Normal scan:
6% overscan
H-linearity:
Less than 7% (Typical)
V-linearity:
Less than 7% (Typical)
Convergence:
Central: 0.4 mm (Typical)
Peripheral: 0.5 mm (Typical)
Raster size stability:
H: 1.0%
V: 1.5%
HV-regulation:
3% (Cut off to High light)
color temperature:
6500 K
Operating temperature: 0 to 35 °C (32 to 95 °F )
Storage temperature:
–10 to 40 °C (14 to 104 °F )
Humidity:
0 to 90%
Power requirements:
AC 120 V, 50/60 Hz
Power consumption:
39 W
Video input:
BNC, 1.0 Vp-p, sync negative
Video output:
Loop-through BNC, automatic 75 Ω termination*
Dimensions:
217 (W) × 217 (H) × 352.5 (D) mm
(85/8 × 85/8 × 14 inches)
Mass:
Approx. 7.8 kg (17 lb 3 oz)
* 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
–257–
SURVEILLANCE
PRODUCTS
Video signal system:
Color system:
CRT Type:
2-2 Monochrome monitors
SSM-Q177
Monochrome quad monitor
•EIA standard •Quad Screen Display permits up to four
compressed, split pictures to be displayed simultaneously
and recorded on a single VCR •High quality compressed
images with 8-bit signal processing for clearer pictures
•Sequential Switcher Function provides automatic switching
between up to four cameras, with a selectable dwell time;
SKIP channel also selectable •Newly developed flyback
transformer provides the high voltage stability required to
minimize picture zooming •Freeze Picture Function can
freeze each picture in quad mode, as well as freeze a VCR
playback picture •Alarm IN/OUT with audible alarm and
flashing LED •Video Loss Detection with on-screen
notification •On-screen menus display Date, Time and
Camera ID •19-inch EIA standard rack mountable
Supplied accessory:
Optional accessory:
Operating Instructions
Mounting Bracket RMM-171
Specifications:
SURVEILLANCE
PRODUCTS
Video signal system:
Picture tube:
EIA standard
17-inch CRT (16-inch viewable area, measured
diagonally), 90° deflection
Resolution:
More than 850 lines (full screen)
Camera input/VCR input:
Composite: 1.0 Vp-p, sync negative, 75 Ω
Video output/VCR output:
Composite: 1.0 Vp-p, sync negative, 75 Ω
Power requirements:
AC 120 V, 50/60 Hz
Power consumption:
Approx. 45 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Storage temperature: -10 to 40 °C (14 to 104 °F)
Operating humidity:
0 to 90% (no condensation)
Storage humidity:
0 to 90% (no condensation)
Dimensions:
424 (W) × 409 (H) × 380 (D) mm
(16 6⁄8 × 16 1⁄8 × 15 inches)
Mass:
18.8 kg (41 lb 6 oz)
Regulation compliance: UL 6500, CSA (cUL), FCC Class A, IC Class A,
DHHS, DNHW
–258–
2-2 Monochrome monitors
SSM-175A
Monochrome monitor
•EIA standard •17-inch CRT size •Excellent picture quality
with more than 850 TV lines horizontal resolution •Dual
loop-through video inputs with switchable 75 Ω termination
•DC clamp switch provides a stable reference for the black
level •19-inch EIA standard rack mountable •Front controls:
Power, INPUT select, H-hold, V-hold, contrast and brightness
•High immunity to external electrical and magnetic
interference •Suitable for many monitoring applications
Supplied accessory:
Optional accessory:
Operating Instruction Manual
Mounting Bracket RMM-171
Specifications
EIA standard
17-inch B/W measured diagonally, 90° deflection
Impedance 75 Ω/high switchable
Level 0.5 to 2.0 Vp-p, sync negative,
BNC-type (2)
Video output:
Impedance more than 10 kΩ, loop-through,
BNC-type (2)
Horizontal resolution:
More than 850 TV lines (at center)
Power requirements:
AC 120 V, 50/60 Hz
Power consumption:
35 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Storage temperature: ≈10 to 40 °C (14 to 104 °F)
Dimensions:
424 (W) ç 409 (H) ç 380 (D) mm
(163/4 ç 161/8 ç 15 inches)
Mass:
17.5 kg (38 lb 9 oz)
SURVEILLANCE
PRODUCTS
Video signal system:
Picture tube:
Video input:
–259–
2-2 Monochrome monitors
SSM-125
Monochrome monitor
•EIA standard •12-inch CRT size •Excellent picture quality
with more than 750 TV lines horizontal resolution •Dual loopthrough video inputs, with switchable 75 Ω termination •DC
clamp switch provides a stable reference for the black level
•Front controls: Power, INPUT select, H-hold, V-hold,
contrast and brightness •High immunity to external electrical
and magnetic interference •Suitable for many monitoring
applications
Supplied accessory:
Operating Instruction Manual
Specifications
EIA standard
12-inch B/W measured diagonally, 90° deflection
Impedance 75 Ω/high switchable
Level 0.5 to 2.0 Vp-p, sync negative,
BNC-type (2)
Video output:
Impedance more than 10 kΩ, loop-through,
BNC-type (2)
Horizontal resolution:
More than 750 TV lines (at center)
Power requirements:
AC 120 V, 50/60 Hz
Power consumption:
30 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Storage temperature: -10 to 40 °C (14 to 104 °F)
Dimensions:
296 (W) × 303 (H) × 300.5 (D) mm
(113/4 × 12 × 117/8 inches)
Mass:
9.2 kg (20 lb 5 oz)
SURVEILLANCE
PRODUCTS
Video signal system:
Picture tube:
Video input:
–260–
2-2 Monochrome monitors
SSM-930
Monochrome monitor
•EIA standard •9-inch CRT size •Excellent picture quality with
more than 750 TV lines horizontal resolution •Loop-through
video input with switchable 75 Ω termination •DC clamp
switch provides a stable reference for the black level •19-inch
EIA standard rack mountable for dual monitor configuration
•Front controls: Power, H-hold, V-hold, contrast and
brightness •High immunity to external electrical and magnetic
interference •Suitable for many monitoring applications
Supplied accessory:
Operating Instruction Manual
Specifications
EIA standard
9-inch B/W measured diagonally, 90° deflection
Impedance 75 Ω/high switchable
Level 0.5 to 2.0 Vp-p, sync negative, BNC-type
Video output:
Impedance more than 10 kΩ, loop-through,
BNC-type
Horizontal resolution:
More than 750 TV lines (at center)
Power requirements:
AC 120 V, 50/60 Hz
Power consumption:
27 W
Operating temperature: 0 to 40 °C (32 to 104 °F)
Storage temperature: ≈10 to 65 °C (14 to 149 °F)
Dimensions:
220 (W) ç 219 (H) ç 252.8 (D) mm
(83/4 ç 85/8 ç 10 inches)
Mass:
5.8 kg (13 lb)
SURVEILLANCE
PRODUCTS
Video signal system:
Picture tube:
Video input:
–261–
3 Switchers
YS-S6
Six-channel sequential switcher
•Compact-size sequential switcher for small surveillance
systems •Six VIDEO INPUTs with loop-through capability
•Accepts also CCIR/PAL signal •Pictures from connected
cameras which don’t have to be monitored can be skipped
by the use of SKIP buttons 1 through 6 •Dwell time is
selectable anywhere from 1 to 30 seconds per camera input
•Both Auto/Manual switching modes are available
Supplied accessory:
Operation manual (1)
Note: AC Adapter is optional
Specifications
General
Power requirements:
Power consumption:
Operating temperature:
Storage temperature:
Dimensions
Mass:
Input signals
VIDEO INPUT 1 to 6:
SURVEILLANCE
PRODUCTS
DC IN:
DC 9 V
Approx. 1.0 W
0 to 40°C (32 to 104°F)
≈20 to 60°C (≈4 to 140°F)
220 (W) ç 96 (H) ç 265.5 (D) mm
(83/4 ç 37/8 ç 101/2 inches)
Approx. 2.1 kg (4 lb 10 oz)
BNC type, 1.0 Vp-p, 75 Ω, unbalanced,
sync negative
DC jack type, DC 9 V
(DC 7 V to 15 V is allowed)
Output signals
VIDEO OUTPUT 1 to 6: BNC type, loop-through output of VIDEO INPUT,
75 Ω termination ON/OFF switchable
SELECT VIDEO OUT: BNC type, 1.0 Vp-p, 75 Ω, unbalanced,
sync negative
–262–
4 Quad Switcher
YS-Q440
Quad switcher
•High performance Quad Image Splitter with an auto
sequential switcher •Up to four compressed, split pictures
can be simultaneously displayed on a single monitor and
recorded on a single VCR •Automatic switching between up
to four cameras can also be performed on a monitor and the
switching interval can be selected in one-second increments
from 1 to 30 seconds •Either asynchronous or synchronous,
color or black & white cameras can be connected •8-bit
signal processing and four field memories provide high
picture quality compressed images •Up to eight characters
can be superimposed onto each of the four compressed
pictures •The built-in date and time generator allows time
and date information to be displayed •Freeze picture
function (Quad mode only) •Alarm function •Video loss
detection •RS-232 remote control port
Supplied accessories:
Rack mounting bracket (for EIA standard rack)
AC power cord
Operating instruction manual
Specifications
Video input/output
Video input:
Video output:
Sync
External SYNC IN
External SYNC OUT
Control
Remote connector:
Alarm input:
Alarm output:
NTSC/EIA standard
AC 100 to 120 V, 60 Hz
Less than 10 W
0 to 40°C (32 to 104°F)
-20 to 60°C (-4 to 140°F)
Approx. 3.8 kg (8 lb 4 oz)
VIDEO INPUT CH1 to CH4, 1.0 Vp-p, 75 Ω
automatic termination
Input (BNC type) (4)
Loop through output (BNC type) (4)
VIDEO OUT (BNC type) (1)
Quad-picture image signal
1.0 Vp-p, 75 Ω
VIDEO OUT (BNC type) (1)
Quad, Sequential, Full screen signal (selectable)
1.0 Vp-p, 75 Ω
SURVEILLANCE
PRODUCTS
General
Video signal system:
Power requirements:
Power consumption:
Operating temperature:
Storage temperature:
Mass:
1.0 Vp-p, 75 Ω VBS or VS signal
1.0 Vp-p, 75 Ω VBS or VS signal
REMOTE (D-sub 9 pin RS-232C port)
ALARM IN terminal (4)
CMOS "L" level or MAKE
ALARM OUT terminal (1)
Relay Out, switching DC 30 V at up to 2 A
RESET OUT terminal (1)
Open Collector Output up to 12 V 20 mA
Dimensions
Other
Alarm hold duration:
350 (12 7/8)
1 to 30 s (one second increments)
30 to 180 s (ten second increments)
Manual
Auto sequential duration:
1 to 30 s (one second increments)
Picture tone:
8-bit video (256 gradations)
44 (1 3/4)
430 (17)
–263–
5 Multiplexers
YS-DX516/DX416
Multiplexer
•Full duplex video multiplexer with up to 16 camera inputs
•Either asynchronous or synchronous cameras can be
connected •Multiplex recording to one VCR while switching
between each camera by a field for precise surveillance of
multiple points •Live pictures can be displayed in full screen,
sequence, quad and multi-screen (4/7/9/13/16) while
simultaneously recording •Playback can be reviewed in full
screen, sequence, and multi-screen (4/7/9/13/16) •1-Field
switching •Individual sequence dual time •Individual alarm
duration/output •Activity detection •Monitor masking •Post
alarm •RS-232C/RS-485 compatible •Menu:
English/French/Spanish
YS-DX516
Specifications
SURVEILLANCE
PRODUCTS
General
Video Signal System:
Power requirements:
Power consumption:
DX516: NTSC standard, DX416: EIA standard
AC 120 V, 60 Hz
DX516: 20 W
DX416: 18 W
Operating temperature: 5 to 40°C (40 to 105°F)
Mass:
4.1 kg (9 lb 1 oz)
Dimensions:
86(H) × 420(W) × 325(D) mm
(3 1⁄2 × 16 5⁄8 × 12 7⁄8) inches
Video inputs
Camera input 1 to 16: DX516: BNC type, VS or VBS, 1.0 Vp-p, 75 W
DX416: BNC type, VS, 1.0 Vp-p, 75 W
VCR input:
DX516: BNC type, VS or VBS, 1.0 Vp-p, 75 W, Auto
termination type
DX416: BNC type, VS, 1.0 Vp-p, 75 W
S-VHS Y/C inputs:
DX516 only: Din Connector, Y: 1.0 Vp-p, 75 W
C: 0.286 Vp-p, 75 W
Video outputs
Camera output 1 to 16: DX516: BNC type, VS or VBS, 1.0 Vp-p, 75 W
DX416: BNC type, VS, 1.0 Vp-p, 75 W
Monitor 1 output:
DX516: BNC type (1), VS or VBS
DX416: BNC type (1), VS
Monitor 2 output:
DX516: BNC type (1), VS or VBS
DX416: BNC type (1), VS
VCR output:
DX516: BNC type, VS or VBS, 1.0 Vp-p, 75 W
DX416: BNC type, VS, 1.0 Vp-p, 75 W
S-VHS Y/C output:
DX516 only: Din Connector, Y: 1.0 Vp-p, 75 W
C: 0.286 Vp-p, 75 W
Other
Synchronization:
Asynchronous individual inputs
Alarm output:
DC 5 V 5.7 kW
Alarm duration:
10, 20, 30, 40, 50, 60, CC* s
Switch input from VCR: Low active 100 kW pull-up
Control terminal:
RS-232C (D-sub 9 pin), RS-485 (RJ-11)
Alarm input: contact close (16)
Remote control input: Alarm output, Sensor alarm
output, Switch in
Sequence time:
1.0 to 30 s (1.0 s increments)
On-screen display:
10 character title, date/time
Buzzer:
ON/OFF
* Stays in alarm mode for as long as alarm input remains active
–264–
YS-DX416
YS-DX516
YS-DX416
6-1 Time lapse video recorders
SVT-S3100
S-VHS time lapse videocassette recorder
•High horizontal resolution of 400 TV lines using S-VHS
format •Excellent signal-to-noise ratio of 45 dB •Seven
different time lapse recording/playback modes are available
in addition to the standard mode (2-hour time mode) with a
normal 120-minute tape
TIME MODE (h)
2
12
24
48
72
96
120
168
INTERVAL (s)
1/60
0.12
0.22
0.42
0.62
0.82
1.02
1.42
Note: In time lapse modes, it is possible to additionally record two hours
longer than the original modes.
Supplied accessories:
Optional accessories:
SURVEILLANCE
PRODUCTS
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •A tape recorded in the 2-hour
mode can be played back by any S-VHS or VHS VTR •Audio
recording and playback are possible in 2, 12 and 24-hour
modes •Built-in time and date generator allows time and date
information to be displayed along with the Alarm Count and
Recording/Playback speed •Various recording modes such
as Auto Repeat Recording, Timer Recording and Alarm
Recording for versatile situations •By using alarm recall and
scan functions, pictures recorded during alarm mode can be
easily checked •Field-by-field picture playback capability
(Forward only) •On-screen display permits easy-to-follow
operation •Auto head cleaning function •Tape before-end
signal output capability •Warning signal output capability
•Power-failure protection for up to 30 days •Security lock
function for avoiding accidental operation errors •External
control capability via an optional RS-232C interface •Remote
control capability of basic operational functions through
ø3.5 mm mini jack
AC power cord (1)
Operation manual (1)
RS-232C interface board SVT-RS1A
Remote control unit SVT-RM10
TLV parts kit TPK-S881
Specifications
General
Tape format:
Power requirements:
Power consumption:
Operating temperature:
Operating humidity:
Dimensions:
S-VHS or VHS
AC 120 V, 60 Hz
22 W
5 to 40°C (41 to 104°F)
Less than 80 %
420 (W) × 100 (H) × 340 (D) mm
(16 5/8 × 4 × 13 1/2 inches)
Mass:
Approx. 5.8 kg (12 lb 13 oz)
Tape speed:
33.35 mm/sec (2-hour mode)
Recording/playback time:2, 12, 24, 48, 72, 96, 120 and 168 hours (with a
T-120 tape)
Alarm recording speed: 2, 12-hour mode, NC*
Alarm recording duration:20 s, 1 m, CC**
Fast forward/rewind time:Approx. 4 minutes (with a T-120 tape)
Video
Recording system:
Input:
Output:
Horizontal resolution:
Signal-to-noise ratio:
Audio
Audio recording mode:
Input:
Output:
Microphone input:
Others
Alarm input:
Alarm output:
Tape end output:
Switch output:
Warning output:
Timer output:
Control terminals:
Rotary four-head helical scanning
system
Luminance signal: FM recording
Color signal: Low-pass band-pass
transformation direct recording
BNC: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
Y/C: (Mini DIN 4-pin)
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.286 Vp-p, at burst level, 75 Ω
BNC: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
Y/C: (Mini DIN 4-pin)
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.286 Vp-p, at burst level, 75 Ω
Color mode: More than 400 TV lines
Black & White mode: More than 430 TV lines
45 dB
* No change of recording speed
** Stays in alarm mode for as long as the alarm input remains active.
0 dBu = 0.775 Vrms
–265–
2, 12 and 24-hour mode
–7.8 dBu, 100 kΩ, unbalanced
(phono jack)
–7.8 dBu, 600 Ω, unbalanced
(phono jack)
–60 dBu, high impedance (ø3.5 mm minijack)
No voltage contract closure activated
+5 V, 5.7 kΩ
+5 V, 5.7 kΩ
+5 V, 5.7 kΩ
+5 V, 5.7 kΩ
+12 V, 5.7 kΩ
ø3.5mm mini jack
Optional RS-232C interface (D-sub 9-pin)
6-1 Time lapse video recorders
SVT-5050
Time lapse videocassette recorder
•Twelve different time lapse recording/playback modes are
available in addition to the standard mode (2-hour time
mode) with a normal 120-minute tape
TIME MODE (h) 2
INTERVAL (s)
12
24
48
72
96 120 168 240 360 480 720 960
1/60 0.12 0.22 0.42 0.62 0.82 1.02 1.42 2.02 3.02 4.02 6.02 8.02
SURVEILLANCE
PRODUCTS
Note: In time lapse modes, it is possible to additionally record two hours
longer than the original modes.
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •A tape recorded in the 2-hour
mode can be played back by any VHS VTR •Audio recording
and playback are possible in 2,12 and 24-hour modes •Builtin time and date generator allows a required scene to be
easily searched by presetting the desired time and date
•Multiple recording modes such as Auto Repeat Recording,
Timer Recording, Alarm Recording, One-shot Recording and
Series Recording for versatile situations •Holiday setting
function •Daylight Saving Time setting function •Quick
recording check function •By using alarm recall/scan/search
functions, pictures recorded during alarm mode can also be
easily checked •Field-by-field picture playback capability
•External timer input capability •Automatic clock setting is
possible when several VTRs are connected •On-screen
display permits easy-to-follow operation •Auto head cleaning
function •Tape before-end signal output capability •Warning
signal output capability •Buzzer function •Power-failure
protection for up to 30 days •Security lock function for
avoiding accidental operation errors •External control
capability via an optional RS-232C interface •Remote control
capability of basic operational functions through ø3.5 mm
mini jack
Supplied accessories:
Optional accessories:
AC power cord (1)
Operation manual (1)
RS-232C interface board SVT-RS1A
Remote control unit SVT-RM10
TLV parts kit TPK-883
Specifications
General
Weight:
Dimensions:
Approx. 4.3 kg (9 lb 6 oz)
420 (W) × 100 (H) × 300 (D) mm
(16 5⁄8 × 4 × 11 7⁄8 inches)
Power requirements:
120 V, 60 Hz
Power consumption:
17 W
Operating temperature: 5 to 40 °C (41 to 104 °F)
Operating humidity:
80 % or less
Fast forward/rewind time:Approx. 100 seconds (when using T-120 tape)
System
Color system:
NTSC color
Video Recording System:Dual-head rotating helical scanning system
Tape speed:
33.35 mm/sec (2-hour mode)
Recording & Playback time:
T-120 2, 12, 24, 48, 72, 96, 120 and 168 hours
Horizontal resolution:
B/W 350 TV lines or more
Color 300 TV lines or more
Video Input/Output
Input:
BNC (1), 1 Vp-p, 75 Ω, unbalanced
Output:
BNC (1), 1 Vp-p, 75 Ω, unbalanced
S/N ratio:
44 dB
Audio Input/Output
Audio recording system: Monaural
Input:
Phono (1), -8 dBs, 47 kΩ, unbalanced
Output:
Phono (1), -8 dBs, 600 Ω, unbalanced
Microphone Input:
3.5 mm minijack (1), -60 dBs, 600 Ω
Distortion:
Less than 4 %
Audio S/N ratio:
42 dB
Others
Alarm input:
Alarm output:
Switch output:
Tape end output:
Warning output:
External timer input:
Clock set output:
Clock set input:
Series output:
Series input:
Remote control input:
Control terminals:
–266–
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
+5 V, 5.7 kΩ, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
+5 V, 5.7 kΩ (low active), terminal
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
Low level
3.5 mm minijack (1)
RS-232C, RS-485
trip (1)
trip (1)
trip (1)
trip (1)
trip (1)
6-1 Time lapse video recorders
SVT-168
Time lapse videocassette recorder
•Reality Regenerator provides clearer, more accurate
pictures during playback •Six different time lapse
recording/playback modes are available in addition to the
standard mode (2-hour time mode) with a normal 120minute tape
TIME MODE (h)
INTERVAL (s)
2
12
24
48
72
96
120
168
1/60
0.12
0.22
0.42
0.62
0.82
1.02
1.42
Note: In time lapse modes, it is possible to additionally record two hours
longer than the original modes.
Supplied accessories:
Optional accessories:
SURVEILLANCE
PRODUCTS
•Fast forward and rewind: 100 seconds with an entire T-120
tape •Quick start mechanism for smooth operation •Adaptive
Picture Control (APC) delivers optimum picture quality to the
recording image •A tape recorded in the 2-hour mode can be
played back by any VHS VTR •Audio recording and playback
are possible in 2,12 and 24-hour modes •Built-in time and
date generator allows time and date information to be
displayed along with the alarm count and recording/playback
speed •Various recording modes such as auto repeat
recording, timer recording and alarm recording for versatile
situations •Holiday setting function •Daylight saving Time
setting function •Quick recording check function •By using
alarm recall and scan functions, pictures recorded during
alarm mode can also be easily checked •Field-by-field picture
playback capability •External timer input capability •Automatic
clock setting is possible when several VTRs are connected
•Real time display indicates real operating times in recording
or stop modes •On-screen display permits easy-to-follow
operation •Auto head cleaning function •Thread check •Clog
detection •Tape end out •Warning signal output capability
•Records the number of the time tape used on the beginning
of the tape for checking •Buzzer function •Power saving
mode •Power-failure protection for up to 30 days •Security
lock function for avoiding accidental operation errors
•External control capability via supplied RS-232C/485
interface •Loop-through capability •Remote control capability
of basic operational functions through ø3.5 mm mini jack
AC power cord (1)
Operation manual (1)
Remote control unit SVT-RM10
Specifications
General
Mass:
Dimensions:
Approx. 4.3 kg (9 lb 6 oz)
420 (W) × 100 (H) × 300 (D) mm
(165/8 × 4 × 117/8 inches)
Power requirements:
120 V, 60 Hz
Power consumption:
17 W
Operating temperature: 5 °C to 40°C (41 °F to 104°F)
Operating humidity:
80% or less
Fast forward/rewind time:Approx. 100 seconds (when using T-120 tape)
System
Video signal:
EIA standard (monochrome)/NTSC (color)
Recording/Playback system:
Rotary four-head helical scanning system
Tape speed:
33.35 mm/sec (2-hour mode)
Recording/Playback time T-120:
2, 12, 24, 48, 72, 96, 120 and 168 hours
Horizontal resolution:
B/W
350 TV lines or more
Color 300 TV lines or more
Video Input/Output
Input:
BNC (1), 1.0 Vp-p, 75 Ω, unbalanced
Output:
BNC (1), 1.0 Vp-p, 75 Ω, unbalanced
S/N ratio:
44 dB
Audio Input/Output
Audio recording system:
Input:
Output:
Microphone input:
Distortion:
Audio S/N ratio:
Others
Alarm input:
Alarm output:
Switch output:
Tape end output:
Warning output:
External timer input:
Clock set output:
Clock set input:
Series output:
Series input:
Remote control input:
Control terminals:
0 dBu = 0.775 Vrms
–267–
Monaural
Phono (1), –8 dBs, 47 kΩ unbalanced
Phono (1), –8 dBs, 600 Ω unbalanced
ø3.5 mm minijack (1) –60 dBs, 600 Ω
Less than 4%
42 dB
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
+5 V, 5.7 kΩ, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
+5 V, 5.7 kΩ (low active), terminal
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
Low level
ø3.5 mm mini jack (1)
RS-232C, RS-485
trip (1)
trip (1)
trip (1)
trip (1)
trip (1)
6-1 Time lapse video recorders
SVT-LC300
Time lapse videocassette recorder
•Sony’s ‘RealAction’ technology allows high density
recording of 20 fields per second •Maximum 96-hour time
lapse recording mode is available with a normal 120-minute
tape
TIME MODE (h)
SURVEILLANCE
PRODUCTS
INTERVAL (s)
6
18
30
48
72
96
1/60
1/20
1/12
0.15
0.22
0.28
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •Audio recording and
playback are possible in 6, 18, 30-hour modes •Built-in time
and date generator allows time and date information to be
displayed along with the Alarm count and
Recording/Playback speed •Various recording modes such
as Auto Repeat Recording, Timer Recording, Alarm
Recording and Series Recording for versatile situations
•Daylight Saving Time setting function •Holiday setting
function •Camera switcher interface •Quick recording check
function •By using alarm recall, scan and search functions,
pictures recorded during alarm mode can be easily checked
•Field-by-field picture playback capability •External timer
input capability •Automatic clock adjusting is possible when
several VCRs are used •On-screen display permits easy-tofollow operation •Auto head cleaning function •Tape beforeend/Tape-end signal output capabilities •Warning signal
output capability •Buzzer function •Power-failure protection
for up to 30 days •Security lock function for avoiding
accidental operation errors •Loop-through capability enables
video and audio to be output through to the monitor
automatically •Clog detection function •Remote control
capability of basic operational functions through ø3.5 mm
mini jack
Supplied Accessories
AC power cable
Operation manual
Optional Accessories
Remote control unit SVT-RM10
TLV parts kit TPK-952
Specifications
General
Mass:
Dimensions:
3.8 kg (8 lb 6 oz)
240(W) × 96.5 (H) × 333 (D) mm
(9 1⁄2 × 3 7⁄8 × 13 1⁄8 inches)
Power requirements:
AC 120V, 60 Hz
Power consumption:
18 W
Operating temperature: 5˚C to 40˚C (41˚F to 104˚F)
Operating humidity:
Less than 80%
System
Video signal:
EIA standard (monochrome)/NTSC (color)
Recording system:
Rotary four-head helical scanning system
Tape speed:
11.11 mm/second (6 or 8-hour mode)
Recording/Playback mode:
6, 18, 30, 48, 72, 96 hours (with a T-120 tape)
8, 24, 40, 64, 96, 126 hours (with a T-160 tape)
Fast forward/Rewind time:
Approx. 2.5 minutes (with a T-120 tape)
Video
Input:
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Output:
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Horizontal resolution:
Color mode: More than 300 TV lines
Black & white mode: More than 350 TV lines
Signal-to-noise ratio:
43 dB
Audio
Audio recording system: Monaural
Input:
-7.8 dBu, 47 kΩ (Phono jack)
Output:
-7.8 dBu, 600 Ω (Phono jack)
Microphone input:
-60 dBu, 600 Ω (3.5 mm mini jack)
Distortion:
Less than 4%
Audio signal-to-noise ratio:
40 dB
Others
Alarm input:
Alarm output:
Switch output:
Tape end output:
Warning output:
Timer output:
External timer input:
Clock set output:
Clock set input:
Series output:
Remote control input:
* Stays in alarm mode for as long as the alarm input remains active.
0 dBu = 0.775 Vrms
–268–
Low level
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (High active)
Low level
+5 V, 5.7 kΩ (Low active)
Low level,
+5 V, 5.7 kΩ (Low active)
Stereo mini pin (1)
6-1 Time lapse video recorders
SVT-124
Time lapse videocassette recorder
•Two different time lapse recording/playback modes are
available in addition to the standard mode (2-hour time
mode) with a normal 120-minute tape
TIME MODE (h)
INTERVAL (s)
2
12
24
1/60
0.12
0.22
•Compact and lightweight •Adaptive Picture Control (APC)
delivers optimum picture quality to the recording image
•Audio recording and playback are possible in 2, 12 and
24-hour modes •Built-in time and date generator allows time
and date information to be displayed along with the Alarm
Count and Recording/Playback speed •Various recording
modes such as Auto Repeat Recording, Timer Recording
and Alarm Recording for versatile situations •Holiday setting
function •Daylight Saving Time setting function •Camera
switcher interface •Quick recording check function •By using
alarm recall and scan functions, pictures recorded during
alarm mode can be easily checked •External timer input
capability •On-screen display permits easy-to-follow
operation •Auto head cleaning function •Tape before-end
signal output / Tape-end signal output capabilities •Warning
signal output capability •Buzzer function •Power-failure
protection for up to 30 days •Security lock function for
avoiding accidental operation errors •Clog detection function
•Remote control capability of basic operational functions
through ø3.5 mm mini jack
Optional accessory:
AC power cord (1)
Operation manual (1)
Remote control unit SVT-RM10
TVL parts kit TPK-951
SURVEILLANCE
PRODUCTS
Supplied accessories:
Specifications
General
Power requirements:
Power consumption:
Operating temperature:
Operating humidity:
Dimensions:
AC 120 V, 60 Hz
18 W
5 to 40˚C (41 to 104˚F)
Less than 80 %
240 (W) × 96.5 (H) × 333 (D) mm
(91/2 × 37/8 × 131/8 inches)
Mass:
Approx. 3.8 kg (8 lb 6 oz)
Tape speed:
33.33 mm/sec (SP mode)
Recording/playback time: 2, 12 and 24 hours (with a T-120 tape)
Alarm recording speed: 2-hour mode
Alarm recording duration: 20 s, 40 s, 1 m, 2 m, 3 m, 5 m, CC*, TRIG
Fast forward/rewind time: Approx. 2.5 minutes (with a T-120 tape)
Video
Recording system:
Rotary four-head helical scanning system
Luminance signal: FM recording
Color signal: Low-pass band-pass transformation
direct recording
Input:
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Output:
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Horizontal resolution:
Color mode : More than 300 TV lines
Black & White mode : More than 350 TV lines
Signal-to-noise:
44 dB
Audio
Audio recording system: Monaural
Audio recording mode: 2, 12 and 24-hour modes
Input:
-7.8 dBu, 47 kΩ (phono jack)
Output:
-7.8 dBu, 600 Ω (phono jack)
Microphone input:
-60 dBu, 600 Ω (ø3.5 mm mini jack)
Distortion:
Less than 4 %
Audio signal-to-noise: 42 dB
Others
Alarm input:
Low level
Alarm output:
+5 V, 5.7 kΩ (Low active)
Switch output:
+5 V, 5.7 kΩ (Low active)
Tape end output:
+5 V, 5.7 kΩ (Low active)
Warning output:
+5 V, 5.7 kΩ (Low active)
External timer input:
Low level
Remote/Tally:
Stereo mini pin
AC input:
3-pin inlet
* Stays in alarm mode for as long as the alarm input remains active.
0dBu = 0.775Vrms
–269–
6-1 Time lapse video recorders
SVT-168E
Time lapse videocassette recorder
SURVEILLANCE
PRODUCTS
•Sony’s ‘RealAction’ technology allows high density
recording of 20 fields per second (24-hour mode) •Reality
Regenerator provides clearer, more accurate pictures during
playback •Maximum 168-hour time lapse recording mode is
available with a normal 120-minute tape
TIME MODE (h)
6
18
30
48
72
96
120
168
INTERVAL (s)
1/60
1/20
1/12
0.15
0.22
0.28
0.35
0.48
•Fast forward and rewind: 100 seconds with an entire T-120
tape •Quick start mechanism for smooth operation •Adaptive
Picture Control (APC) delivers optimum picture quality to the
recording image •Audio recording and playback are possible
in 6, 18 and 30-hour modes •Built-in time and date generator
allows time and date information to be displayed along with
the alarm count and recording/playback speed •Various
recording modes such as auto repeat recording, timer
recording, alarm recording and series recording for versatile
situations •Daylight saving time setting function •Holiday
setting function •Camera switcher interface •Quick recording
check function •By using alarm recall and scan functions,
pictures recorded during alarm mode can be easily checked
•Field-by-field picture playback capability •External timer
input capability •Automatic clock adjusting is possible when
several VTRs are used •Real time display indicates real
operating times in recording or stop modes •On-screen
display permits easy-to-follow operation •Auto head cleaning
function •Thread check •Clog detection •Tape end out
•Warning signal output capability •Records the number of the
time tape used on the beginning of the tape for checking
•Buzzer function •Power saving mode •Power-failure
protection for up to 30 days •Security lock function for
avoiding accidental operation errors •External control
capability via supplied RS-232C/485 interface •Loop-through
capability •Loop-through capability enables video and audio
to be output through to the monitor automatically •Clog
detection function •Remote control capability of basic
operational functions through ø3.5 mm mini jack
Supplied accessories:
Optional accessories:
AC power cord (1)
Operation manual (1)
Remote control unit SVT-RM10
Specifications
General
Mass:
Dimensions:
Approx. 4.3 kg (9 lb 6 oz)
420 (W) × 100 (H) × 300 (D) mm
(16 5⁄8 × 4 × 11 7⁄8 inches)
Power requirements:
120 V, 60 Hz
Power consumption:
17 W
Operating temperature: 5 to 40 °C (41 to 104 °F)
Operating humidity:
80 % or less
Fast forward/rewind time:
Approx. 100 seconds (when using T-120 tape)
System
Video signal:
EIA standard (monochrome)/NTSC (color)
Recording/Playback system:
Rotaty four-head helical scanning system
Tape speed:
11.12 mm/sec (6 or 8-hour mode)
Recording/Playback time:
T-120 6, 18, 30, 48, 72, 96, 120, 168 hours
T-160 8, 24, 40, 64, 96, 128, 160, 224 hours
Horizontal resolution:
B/W
350 TV lines or more
Color
300 TV lines or more
Video Input/Output
Input:
BNC (1), 1 Vp-p, 75 Ω, unbalanced
Output:
BNC (1), 1 Vp-p, 75 Ω, unbalanced
S/N ratio:
44 dB
Audio Input/Output
Audio recording system: Monaural
Input:
Phono (1), -8 dBs, 47 kΩ, unbalanced
Output:
Phono (1), -8 dBs, 600 Ω, unbalanced
Microphone Input:
ø3.5 mm minijack (1), -60 dBs, 600 Ω
Distortion:
Less than 4 %
Audio S/N ratio:
42 dB
Others
Alarm input:
Low level, terminal trip (1)
Alarm output:
+5 V, 5.7 kΩ (low active), terminal trip (1)
Switch output:
+5 V, 5.7 kΩ, terminal trip (1)
Tape end output:
+5 V, 5.7 kΩ (low active), terminal trip (1)
Warning output:
+5 V, 5.7 kΩ (low active), terminal trip (1)
External timer input:
Low level, terminal trip (1)
Clock set output:
+5 V, 5.7 kΩ (low active), terminal trip (1)
Clock set input:
Low level, terminal trip (1)
Series output:
+5 V, 5.7 kΩ (low active), terminal trip (1)
Series input:
Low level
Remote control input: ø3.5 mm minijack (1)
Control terminals:
RS-232C, RS-485
0dBu = 0.775Vrms
–270–
6-1 Time lapse video recorders
SVT-40E
Time lapse videocassette recorder
•Sony’s ‘RealAction’ technology allows high density
recording of 20 fields per second (24-hour mode) •Reality
Regenerator provides clearer, more accurate pictures during
playback •2 different time lapse recording/playback modes
are available in addition to the standard mode (8-hour time
mode) with a normal 160-minute tape
TIME MODE (h)
INTERVAL (s)
8
24
40
1/60
1/20
1/12
Supplied accessories:
Optional accessories:
SURVEILLANCE
PRODUCTS
•Fast forward and rewind: 100 seconds with an entire T-120
tape •Quick start mechanism for smooth operation •Adaptive
Picture Control (APC) delivers optimum picture quality to the
recording image •Audio recording and playback are possible
in 8, 24 and 40-hour modes •Built-in time and date generator
allows time and date information to be displayed along with
the alarm count and recording/playback speed •Multiple
recording modes such as auto repeat recording, timer
recording, alarm recording and series recording for versatile
situations •Holiday setting function •Daylight saving time
setting function •Quick recording check function •By using
alarm recall and scan functions, pictures recorded during
alarm mode can also be easily checked •Field-by-field
picture playback capability •External timer input capability
•Automatic clock setting is possible when several VTRs are
used •Real time display indicates real operating times in
recording or stop modes •On-screen display permits easy-tofollow operation •Auto head cleaning function •Thread check
•Clog detection •Tape end out •Warning signal output
capability •Records the number of the time tape used on the
beginning of the tape for checking •Buzzer function •Power
saving mode •Power-failure protection for up to 30 days
•Security lock function for avoiding accidental operation
errors •External control capability via supplied RS-232C/485
interface •Loop-through capability •Remote control capability
of basic operational functions through ø3.5 mm mini jack
AC power cord (1)
Operation manual (1)
Remote control unit SVT-RM10
Specifications
General
Mass:
Dimensions:
Approx. 4.3 kg (9 lb 6 oz)
420 (W) × 100 (H) × 300 (D) mm
(16 5⁄8 × 4 × 11 7⁄8 inches)
Power requirements:
120 V, 60 Hz
Power consumption:
17 W
Operating temperature: 5 to 40 °C (41 to 104 °F)
Operating humidity:
80 % or less
Fast forward/rewind time:Approx. 100 seconds (when using T-120 tape)
System
Video signal:
EIA standard (monochrome)/NTSC (color)
Recording/Playback system:
Rotaty four-head helical scanning system
Tape speed:
11.12 mm/sec (6 or 8-hour mode)
Recording/Playback time:
T-120 6, 18, 30 hours
T-160 8, 24, 40 hours
Horizontal resolution:
B/W
350 TV lines or more
Color 300 TV lines or more
Video Input/Output
Input:
BNC (1), 1 Vp-p, 75 Ω, unbalanced
Output:
BNC (1), 1 Vp-p, 75 Ω, unbalanced
S/N ratio:
44 dB
Audio Input/Output
Audio recording system:
Input:
Output:
Microphone Input:
Distortion:
Audio S/N ratio:
Others
Alarm input:
Alarm output:
Switch output:
Tape end output:
Warning output:
External timer input:
Clock set output:
Clock set input:
Series output:
Series input:
Remote control input:
Control terminals:
0 dBu = 0.775 Vrms
–271–
Monaural
Phono (1), -8 dBs, 47 kΩ, unbalanced
Phono (1), -8 dBs, 600 Ω, unbalanced
ø3.5 mm minijack (1), -60 dBs, 600 Ω
Less than 4 %
42 dB
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
+5 V, 5.7 kΩ, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
+5 V, 5.7 kΩ (low active), terminal
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
Low level, terminal trip (1)
+5 V, 5.7 kΩ (low active), terminal
Low level
ø3.5 mm minijack (1)
RS-232C, RS-485
trip (1)
trip (1)
trip (1)
trip (1)
trip (1)
6-1 Time lapse video recorders
SVT-DL224
Time lapse videocassette recorder
•Sony’s ‘RealAction’ technology allows high density
recording of 20 fields per second (24-hour mode) •Two
alternative recording/playback modes are available with a
normal 160-minute tape
TIME MODE (h)
SURVEILLANCE
PRODUCTS
INTERVAL (s)
8
24
1/60
1/20
•Compact and lightweight •DC 12 V power operation
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •Audio recording and
playback are possible in 8 and 24-hour modes •Built-in time
and date generator allows time and date information to be
displayed along with the Alarm Count and Recording/
Playback speed •Various recording modes such as Auto
Repeat Recording, Timer Recording and Alarm Recording
for versatile situations •Daylight Saving Time setting function
•Camera switcher interface •Quick recording check function
•By using alarm recall and scan functions, pictures recorded
during alarm mode can be easily checked •Field-by-field
picture playback capability (Forward only) •External timer
input capability •On-screen display permits easy-to-follow
operation •Auto head cleaning function •Tape-end signal
output capability •Warning signal output capability •Clog
detection function •Power-failure protection for up to 30 days
•Security lock function for avoiding accidental operation
errors •Overwrite inhibit function •Clog detection function
•Remote control capability of basic operational functions
through ø3.5 mm mini jack
Supplied accessory:
Optional accessory:
Operation manual (1)
Remote control unit SVT-RM10
TVL parts kit TPK-952
Specifications
General
Power requirements:
Power consumption:
Operating temperature:
Operating humidity:
Dimensions:
DC 10 V to 16 V
18 W
5 to 40˚C (41 to 104˚F)
Less than 80 %
240 (W) × 96.5 (H) × 333 (D) mm
(91/2 × 37/8 × 131/8 inches)
Mass:
Approx. 3.8 kg (8 lb 6 oz)
Tape speed:
11.11 mm/sec (EP mode)
Recording time:
8 and 24 hours (with a T-160 tape)
Playback time:
8 and 24 hours, and 2 hours 40 minutes* (with a
T-160 tape)
Alarm recording speed: 8-hour mode, NC**
Alarm recording duration: 20 s, 40 s, 1 m, 2 m, 3 m, 5 m, CC***, TRIG
Fast forward/rewind time: Approx. 3 minutes (with a T-160 tape)
Video
Recording system:
Input:
Output:
Horizontal resolution:
Signal-to-noise:
Others
Alarm input:
Alarm output:
Switch output:
Tape end output:
Warning output:
External timer input:
DC input:
Control terminals:
Rotary four-head helical scanning system
Luminance signal : FM recording
Color signal : Low-pass band-pass transformation
direct recording
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
1.0 Vp-p, 75Ω, unbalanced (BNC type)
Color mode : More than 300 TV lines
Black & White mode : More than 350 TV lines
43 dB
Audio
Audio recording system: Monaural
Audio recording mode: 8 and 24-hour modes
Input:
-7.8 dBu, 47 kΩ (phono jack)
Output:
-7.8 dBu, 600 Ω (phono jack)
Microphone input:
-60 dBu, 600 Ω (ø3.5 mm mini jack)
Distortion:
Less than 4 %
Audio signal-to-noise: 40 dB
* This applies in the event that a tape recorded in SP mode is played back in EP mode.
* No change of recording speed
* Stays in alarm mode for as long as the alarm input remains active.
0 dBu = 0.775Vrms
–272–
Low level
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
Low level
DC 12 V terminals
ø3.5 mm mini jack
6-2 Time lapse video recorders accessories
SVT-RM10
Remote Control Unit
•Works with all Sony SVT series time lapse
VTRs
•Provides wired remote control operation
for REC/PLAY/STOP/REW/FF/REV
PLAY/PAUSE
•MENU button and REC/PLAY SPEED
button are also available
•Cable Length: 2.4 m
SVT-RS1A
RS-232C Interface Board
SURVEILLANCE
PRODUCTS
•When installed in the SVT-S3100 and
SVT-5050, this board allows these
recorders to be remotely controlled from
computers
•Connectable with standard RS-232C cable
(male type)
•REC CHECK function is available
TLV parts kit
•Parts kit for all SVT-series time lapse
VCRs
•A total of 19 parts including VCR cylinder
and brake assembly
–273–
7-1 Digital surveillance recorder
HSR-1/HSR-2
Digital Surveillance Recorder
SURVEILLANCE
PRODUCTS
•Hybrid configuration of HDD and DV tape drive •Four
alternative quality modes: Super, High ,Middle and Low
modes •Excellent picture quality provided by super mode
with a horizontal resolution of more than 500 TV lines •Large
storage capacity(more than 60 GB) and long recording time
by using DV cassette tape(270-minute tape) as a storage
medium •High refresh rate for recording of each camera
•High reliability on tape transport mechanism and heads
offered by the hybrid configuration of HDD and DV tape
drive. •Compact body which matches that of a 14-inch
monitor •Compact storage medium which requires less
space •Up to 16 camera inputs provided by installing
optional HSRA-11 •Built-in multiplexing capability which
allows recording and monitoring of up to 16 camera inputs
independently. •A variety of monitoring patterns •Two
monitoring outputs for simultaneous playback on the first
monitor and monitoring on the second monitor •Five preset
recording modes to be flexibly combined with picture quality
mode, tape length, recording time, number of camera inputs
and the recording cycle of each camera. •Flexible camera
assignment •RS-232C interface for PC control •Freely
configurable 37-pin parallel port •Flexibility in alarm mode
•Continuous recording function without breaks even while
changing or rewinding the tape •Sophisticated security
functions •Water mark •Intelligent search functions:
time/date search, alarm search, specific user data search
and noiseless picture search •Pre Alarm recording capability
for event recording •Power On recording capability •Frame
recording in hyper mode
Exclusive features for HSR-2
•Built-in triple multiplexing capability which allows
simultaneous playback, recording and monitoring of up to 16
camera inputs •Large HDD capacity
Supplied Accessories:
Optional Accessories:
AC power cord (1)
Operation manual (1)
HSRA-11 (Input Board)
SVRM-100A (Remote Control Unit)
Specifications
Video
Input:
Horizontal resolution:
Signal-to-noise ratio:
VBS, VS (BNC type):
1.0 Vp-p, 75 Ω, unbalanced
VBS (BNC type):
1.0 Vp-p, 75 Ω, unbalanced
S-VIDEO (DIN 4-pin):
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.286 Vp-p, 75 Ω, at burst level
SUPER, HIGH, MIDDLE and LOW mode (selectable)
(Field-by-field recording)
HYPER mode
(Frame-by-frame recording with a trigger signal)
More than 500 TV lines (HYPER and SUPER mode)
More than 48 dB
Built-in Multiplexer
Input:
Output:
Split screen display:
4 inputs (up to 16 inputs with optional boards)
2 outputs
9 patterns
Output:
General
Mass:
Dimensions:
10 kg (22 lb 1 oz)
355 (W) x 125 (H) x 410 (D) mm
(14 × 5 × 16 1/4 inches)
Power requirements:
AC 100 V ~ 120 V, 50/60 Hz
Power consumption:
58 W (without options)
78 W (with full options)
Operating temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating humidity:
Less than 80 %
Usable tape:
DV*1 or DVCAM*2 cassette tape
(standard size, mini size)
HDD capacity:
More than 4 GB (HSR-1)
More than 20 GB (HSR-2)
System
Video signal:
Recording system:
EIA standard, NTSC color
Rotary two-head helical scanning system
Digital components
Quantization:
8-bit
Sampling frequency:
13.5 MHz (4:1:1 components)
Recording/Playback time:
Maximum 9999 hours (Approx. 400 days)
Fast forward/Rewind time:
Less than 3 min. (with a DV270 tape)
Quality mode:
Connectors
Parallel input/output:
Control S:
D-SUB 37-pin (1)
Input: 24 terminals to be freely assigned
(Alarm, Clock set, Series rec, Alarm cancel, etc.)
Output: 8 terminals to be freely assigned
(Auto off, Tape end, Series rec, Rec tally, ect.)
Power output: +12 V (max 100 mA)
Stereo mini (1)
*1 The recorded tape by the HSR-1/HSR-2 cannot be played back on DV equipment.
*2 A DVCAM 184-minute tape can be used with the HSR-1/HSR-2. It has the same storage capacity as that of a DV 270-minute tape.
–274–
7-2 Digital surveillance recorder accessories
HSRA-11
Input Board for HSR-1/HSR-2
When installed in the HSR-1/HSR-2, this
board enables signals from camera to be
input to the unit.
Connector:
Input : BNC (4)
SVRM-100A
Remote Control Unit for the HSR-1/HSR-2
•Provides wired remote control operation for
STOP/REC/PAUSE/REW/PLAY/FFWD
•JOG/SHUTTLE operation
Specifications
Mass:
DC 5 V(supplied from the HSR-1)
40 mW
Stereo mini plug
Control S
90 (W) × 39 (H) × 182 (D) mm
(3 5⁄8 × 1 9⁄16 × 7 1⁄4 inches)
250 g (8.8 lb)
SURVEILLANCE
PRODUCTS
Power requirements:
Power consumption:
Remote control:
Control signal:
Dimensions:
–275–
8-1 Video transmitter
RSE-500/400
RSE-500 and RSE-400 comparison
RSE-500
RSE-400
Video
Send
Receive
YES
YES
YES
NO
Send
YES
YES
Voice
Receive
YES
YES
Control
Send
YES
YES
Data
Receive
YES
YES
(Features of both RSE-500 and RSE-400)
•Transmission of smooth and clear video at a maximum of
30 frames per second via ISDN line •Selectable picture
transmission mode (Fast/Normal/Fine) •Accept eight camera
inputs which are selectable from a control center or local
terminals •I/O port to control camera pan/tilt and zoom lens
•Relay output port to control external devices (i.e. door
locks, lights) •Transmission and receiving capability of audio
which allows conversation between two sites •When an
alarm signal is input to a terminal, it automatically activates
the control center to switch the monitor to watch that
terminal •Compatible with a wide range of cameras,
monitors, and TLV equipment •Password protection •An
RS-232C serial interface for PC control •Remote diagnostics
Supplied Accessories:
RM-R500 Remote Control Unit (for RSE-500 only)
Size AA (LR6) alkaline batteries (2) (for RSE-500
only)
Operation manual
Menu sheet
AC power cord
SURVEILLANCE
PRODUCTS
RSE-400
Tablet input
Interface:
Baud rate:
Specifications
Video
Coding:
Operating bandwidth:
Frame rate:
Picture elements:
RSE-500
H.261/H.236 (ITU-T recommendation)
56 kbps/64 kbps/112 kbps/128 kbps/384 kbps
Max. 30 frames per second
352 pixels x 288 lines
Color difference (B-Y, R-Y) 176 pixels x 144 lines
NTSC (mutually connectable with PAL)
RSE-500 only
Color system:
PinP:
Input
Video In/Ext. Video In: 1 Vp-p, 75 Ω, sync negative (BNC type)
Video Out/Through Out: 1 Vp-p, 75 Ω, sync negative (BNC type)
Monitor Out:
1 Vp-p, 75 Ω, sync negative (BNC type)
Input connectors
Video In:
RSE-500: 8
RSE-400: 8
Ext. Video In:
RSE-500: 1
RSE-400: 1
Video Out:
RSE-500: 1
RSE-400: Monitor Out:
RSE-500: 1
RSE-400: 1
Audio
Coding:
G.728 (ITU-T recommendation)
Transfer rate:
16 kbps
Bandwidth:
3.4 kHz
Input
Headphone Mic In:
–60 dBu/4.7 kΩ, unbalanced (mini-jack)
Line Out:
Variable, 4.7 kΩ (phono)
Headphone SP Out:
Variable, 72 Ω (mini-jack)
Input connectors
Mic In:
RSE-500: 1
RSE-400: 1
Headphone Mic In:
RSE-500: 1
RSE-400: 1
Line Out:
RSE-500: 1
RSE-400: 1
Headphone SP Out:
RSE-500: 1
RSE-400: 1
Communications interface
Network
Multiplexing:
Video, audio, data
Transmission rate:
ISDN interface, 1B/2B
V 35 with RS-366 (56 k to 384 k)
Network connectors
ISDN BRI (S/T):
RJ45
V 35 with RS-366:
36-pin half-pitch connector (2)
Computer control port
Interface:
RS-232C
Baud rate:
1200/4800/9600/19200/34000 bps
User data I/O
I/O parallel
Alarm input:
Relay control:
Camera control:
Remote control input:
I/O serial
Baud rate:
Interface:
RS-232C or RS-422
9600 bps
D-sub 9-pin
TTL input, pull-up resistance 10 kΩ
D-sub 9 pin
Output mode: Open collector (40 V, 40 mA)
Input mode: TTL input, pull-up resistance 10 kΩ
Output mode: Open collector (40 V, 40 mA)
Input mode: TTL input, pull-up resistance 10 kΩ
Mini-jack, SIRCS format
Operation keys:
1200/4800/9600/19200/34000 bps
RS-232C or RS-422 (1)
RS-232C or RS-485 (1)
RS-232C (1)
RSE-500: 3 (switchable with RS-422/485)
RSE-400: 3 (switchable with RS-422/485)
RSE-500: 8
RSE-400: 8
RSE-500: 8
RSE-400: 8
RSE-500: 12
RSE-400: 12
RSE-500: 1
RSE-400: 1
RSE-500: (1)
RSE-400: (1)
Main unit keys, remote control, tablet (option)
General
Power requirements:
Power consumption:
Operating temperature:
Operating humidity:
Storage temperature:
Storage humidity:
Mass:
AC 120 V, 50/60 Hz
0.55 A
5 to 35°C (41 to 94°F)
20% to 80% (no condensation)
- 20 to 60°C (- 4 to 140°F)
20% to 80% (no condensation)
7.0 kg (15 lb 7 oz)
RS-232C:
Alarm input:
Relay output:
Camera P I/O:
SIRCS input:
RS-485:
Dimensions
–276–
8-2 Video transmitter accessory
RM-R500
Remote Control Unit (for RSE-500
only)
SURVEILLANCE
PRODUCTS
•Remotely controls the RSE-500
•Choice of wired or wireless
•Control buttons include camera switching,
tilt and lens control
–277–
9-1 Automotive monochrome video camera
SSC-530AM
CCD monochrome video camera
•Compact, lightweight and rugged construction •1/2-inch IT
Hyper HAD CCD provides extremely high sensitivity with a
minimum illumination of 0.3 lx •Wide angle view–a full 100
degrees horizontally, 80 degrees vertically •Built-in electret
condenser microphone •Only single 4-pin Multiple Cable
required between the SSC-530AM and the SSM-721AMR to
transmit video and audio signals, together with DC power
Supplied accessories:
Optional accessories:
Camera bracket
Rubber cap
Adhesive
Self-fusing tape (2)
Angle adjusting screw (4)
3mm allen key
4mm washer (4)
5mm hexagon head bolt (5)
5mm washer (5)
Rubber nut (5)
Operating instruction manual
Camera cable VK-110A/120A (10 m/20 m)
Water-resistant extension cable VK-305 (5 m)
Water-resistant camera cable VK-310A/318A/320A
(10/18/20 m)
Image device:
Picture elements:
Sensing area:
Lens:
Signal system:
Scanning system:
Syncronization:
Horizontal resolution:
Minimum illumination:
Signal-to-noise ratio:
Video/audio output:
1/2-inch Interline Transfer Hyper HAD CCD
510 (H) ç 492 (V)
6.3 mm ç 4.7 mm
f=3.0 mm, F1.6 with auto-iris
EIA standard
525 lines, 2:1 interlace
Internal
380TV lines
0.3 lx
50 dB (AGC OFF)
4-pin Multi-connector
1 DC input
2 Video output: 1.0 Vp-p, 75 Ω, sync negative
3 Ground
4 Audio output: ≈5 dBu (436 mVrms),
less than 10 kΩ, unbalanced
1
2
4
3
Power requirements:
Power consumption:
Operating temperature:
Storage temperature:
Mass:
DC 12 V
1.2 W (at DC 12 V)
≈20 to 70°C (≈4 to 158°F)
≈30 to 85°C (≈22 to 185°F)
550 g (1 lb 3 oz)
Dimensions:
Approx. 5 (7⁄32)
76.5 (31⁄8)
48 (115⁄16)
55 (21⁄4)
105.6 (41⁄4)
94 (33⁄4)
20.5 (13⁄16)
10 (13⁄32)
21.5 (7⁄8)
46 (113⁄16)
9
27 (11⁄8)
Hole 6.5 ( ⁄32) dia.
46 (113⁄16)
SURVEILLANCE
PRODUCTS
Specifications
Unit: mm (inch)
66 (25⁄8)
–278–
9-2 Automotive monochrome video monitor
SSM-721AMR*
7-inch monochrome monitor
•Offers bright, clear and high-contrast pictures •Compact,
lightweight and rugged construction •Built-in speaker
•Day/Night switch adjusts picture brightness for normal or
low-light conditions •Automatic back-up operation •Only a
single 4-pin Multiple Cable required between the
SSC-530AM and the SSM-721AMR to transmit video and
audio signals, together with DC power •Semi-flat
square/non-glare CRT •Audio output connection for an
optional external speaker •Dual camera inputs •Alternative
power supply mode (DC 12/24 V)
Supplied accessories:
Optional accessory:
Mounting Bracket
Screw (4)
Bolt (4)
Washer (12)
Spring Washer (8)
Nut (4)
Power Supply Cable
Bracket Holder
Monitor Scale
Operating Instruction Manual
Monitor Hood WU-700AM
Specifications
1
2
4
3
EIA standard
7-inch B/W measured diagonally 90° deflection
ø50 mm (2-inch) impedance 8 Ω, 0.5 W output (max.)
4-pin Multi-connector (2)
1 12 V DC output
2 Video input: 1.0 Vp-p, 75 Ω, sync negative
3 Ground
4 Audio input: ≈5 dBu (436 mVrms)
more than 30 kΩ, unbalanced
SURVEILLANCE
PRODUCTS
Video signal system:
Picture tube:
Speaker:
Video/audio output:
Output:
External speaker jack (mini jack)
impedance 8 Ω
Power requirements:
DC 12 or 24 V
Power consumption:
23 W (max.)
Operating temperature: –15 to 60 °C (5 to 140 °F)
Storage temperature: –25 to 80 °C (–13 to 185 °F)
Mass:
Approx. 3.2 kg (7 lb)
Dimensions
234 (91⁄4)
205 (81⁄8)
203 (8)
25°
73.5 (3)
23 (9⁄32)
220 (83⁄4)
50 (2) 53 (21⁄8)
235 (93⁄8)
120 (43⁄4)
25 (1)
56 (21⁄4)
5°
75.5 (3)
174 (67⁄8)
151 (6)
56 (21⁄4) 73.5 (3)
Hole 6.5ç14
(9⁄32ç9⁄16)
Hole ¶ 7 (9⁄32)
Unit: mm (inch)
* Not available in some areas. For details, please contact your nearest Sony office.
–279–
–280–
SURVEILLANCE
PRODUCTS