Breathing

Take your safety personally
Breathing
under toughest
conditions
Powered & Supplied Air Respirators
by 3M
Providing clean breathing air is essential when working in areas
The Selection of Respiratory Protection Equipment
subjected to highest hazardous contaminants.
follows a basic 3M four-step method:
3M has developed a comprehensive and versatile range of
1 Identify the Hazards –
industry-proven powered and supplied air respirators especially
for these hazardous working environments. In addition to
providing respiratory protection these systems offer high levels of
comfort and ease of use which can enable improved productivity
in the workplace. Ideal air supply and valuable combinations of
different protective functions enable the wearer to have not only
respiratory protection, but also eye, face, head and sometimes
even shoulder protection.
3M has two ways you can buy P&SA respirators; one is the
Modular Range or you can buy individual systems. The Modular
Range option allows the user to tailor the system for particular
requirements in their workplace. The criteria for choosing the
optimal protection system include the level and type of hazard in
the work area, duration of exposure and work conditions such as
heat or strenuous work. Individual systems include everything
you will need, apart from a headtop.
dust, metal fume, gas, vapour etc.
2Assess the Risk – assess the hazard levels against safety
standards and consider other protection – skin, eye and body
3Select the right Respirator – disposable, reusable, half mask,
full face, powered, supplied-air
4Train in fitting and use – to optimise respiratory protection
3M™ Powered & Supplied Air
Respirators
Powered & Supplied Air Respirators
Mobility Around the Workplace
Advantages of these Systems:
Regardless of whether you choose a powered air delivery unit
Supplied air regulators are a good choice where limited mobility
3M is available to support the user in the correct selection,
system or supplied air system – both are safe, comfortable and
is required and there is a source of compressed air available.
training and proper use of these products.
industry proven.
+Combination of different protective functions, i.e. respiratory,
head, face, eye and hearing protection
– Comfortable respiratory protection
– Integrated head protection
– Reliable eye and face protection
No matter which system you choose, you will always be getting
Powered air delivery units are a good choice where high
a safe, comfortable and industry proven 3M™ Powered Air or
mobility is required; your workers can move around freely and
Supplied Air Respiratory solution.
be assigned to any particular area wherever they happen to be
– Optional glare protection filters for welders
needed.
– Optional hearing protection
+No breathing resistance for easier working
+Refreshing moving airflow
Powered Air
+High wearer comfort can lead to:
3M™ Jupiter™
Powered Air Turbo
– higher wearer acceptance;
– extended wearing period; and
obility
high m
– higher productivity
high m
+Unlimited wearing time – for increased productivity
3M™ Dustmaster™
Powered Air Turbo
obility
Air Delivery Units
3M™ Airstream™
PAPR Helmet AH4
3M™ Powerflow™
Turbo Unit with Full
Supplied Air
Powered Air Delivery Units:
Supplied Air Respirator (SAR) Systems:
+Purify the air coming in from the work environment
+Utilise air from an external compressed air source
+Consist of a headtop, breathing tube, battery-powered
turbo unit and one or more filters to remove particulate
and gaseous contaminants out of the incoming air
+Offer high mobility
3M™ Flowstream™
Air Regulator
that is independent of the hazardous environment
iring
k requ
Wor
+Consist of a headtop, breathing tube, belt-mounted
ility
d mob
limite
3M™ AirCare™
Filtration Unit
regulator and compressed air supply tube
+Offer adjustable airflow to the headtop
to suit personal preference
+Can be used against contaminants with low warning properties
In both these systems, a slight positive pressure in the headtop
36
makes breathing more comfortable and prevents contaminated air
3M™ Jupiter™ and
3M™ Dustmaster™ Powered Air Turbo
3M™ Flowstream™ and Vortex/Vortemp
and S-200 Supplied Air Systems
from entering the headtop.
Work requiring high mobility
Work requiring limited mobility
3M™ S-200™
Supplied Air System
3M™ Visionair™
Supplied Air Visor
37
3M™ Powered & Supplied Air
Respirators
3M™ Modular
Range
Four Steps to the Right Respirator
The new 3M™ S-Series Headcovers and Hoods
Modular 3M™ Powered and
Supplied Air Respirators
Ready-to-Use Packs
1 Identify the Hazards – dust, metal fume, gas, vapour etc.
2 Assess the Risk – assess the hazard levels against safety
easy application specific modular kit to get you going quickly.
standards and consider other protection – skin and eye
3
3M`s Ready-to-Use Packs are intented to provide a quick and
1 What is your application?
2 Select your headtop
3 Select your ready to use 3M™ Jupiter™/Dustmaster™ Pack
Introducing the lightweight, loose-fitting 3M S-Series Headcovers and
All 3M S-Series headtops:
Hoods for 3M™ Powered and Supplied Air Respirators. Developed
+ Meet the highest respiratory performance requirements
from a computer model of worldwide head sizes – and combined
when used with specific 3M air delivery units.
with new sizing and adjustment options – the 3M S-Series Headcovers
and Hoods can be comfortably worn by many more wearers.
excellent field of view. Visors also provide eye and face protection to
Wearers enter a world of excellent airflow distribution and lower
EN166 – liquid splash and low energy impact.
noise, excellent vision with soft face, neck or shroud respiratory
seals and minimised visor distortion. Choose from four ready-to-use
+Offer improved comfort, low air flow noise and reduced fogging.
+Connect via the new, strengthened BT-Series breathing tubes.
integrated suspension Headcovers and Hoods or three premium
Select the right Respirator – Powered, Supplied-Air
+Have reduced curvature visors for reduced reflections and glare and
reusable suspension Hoods for highly-cost effective replacement of
outer fabrics.
3.1
Choose your headtop
Choose among a wide selection of headtops to meet the
All new benefits
requirements of your workplace, from lightweight hoods to
industrial helmets, that provide not only respiratory protection,
but also eye and face protection, head protection, and optionally,
hearing protection.
3.2
Choose your powered air turbo
To handle the contaminant situation at your
particular workplace, you have the choice between two filtering
powered air turbo systems and three supplied air regulators.
Individual Systems
The respirator systems featured below can be used in a variety
Improved shape
+The new design of the headcovers and hoods
of workplace applications. They include the 3M™ Airstream™
more closely profiles the wearer’s head for improved
Powered Air Respirators with integrated head, eye, face and
appearance compared to other designs that tend
respiratory protection and the 3M™ S-200 Regulator, compatible
to “peak”.
with 3M™ Half and Full Face Masks.
3M™ Airstream™ Powered Air Respirators
Improved Visibility
+S-Series visors have excellent field of view with reduced
3.3
curvature for decreased reflections and glare.
Choose your breathing tube
You need a breathing tube connecting the air source with the
headtop to ensure that clean air reaches the headtop reliably
3M™ S-200 Supplied Air Respirator
and with unrestricted airflow. The breathing tubes offered are
Comfortably worn by more users
+Based on a computer modeling of a worldwide
compatible with all headtops and air sources.
sampling of head sizes, the new S-Series
suspensions, through their sizing and adjustment
3M™ Powerflow Plus™ Powered Air Respirators
3.4
NEW!
options, will comfortably fit more wearers than
previous models.
Choose accessories
3M offers a comprehensive range of accessories to make it easy
to install your individual supplied air system.
3M™ Visionair™ Supplied Air Visor
4Train in fitting and use – to optimise respiratory protection
38
Excellent Air Flow
+All S-Series wearers benefit from excellent airflow
distribution for improved comfort and lower noise.
39
3M™ Modular
Range
3M™ S-Series –
Integrated Suspension Headcovers and Hoods
3M™ S-Series – Premium Reusable Suspension Hoods
Integrated suspension models offer the advantages of being fully
for air whistling past the wearer’s ears, allowing for better worker
assembled and ready to use straight out of the box. They can be suitable
communication and improved comfort. A new exhalation panel vents the
for applications that require frequent replacement of the entire headtop
headtop without the traditional vent hole pattern or exhalation valve. The
assembly, such as pharmaceutical manufacturing, or in situations where
integrated suspension headtops are available in two adjustable sizes to
there is less soiling of the outer fabric. The integrated suspension models
comfortably fit more wearers: S/M and M/L. For disposal, the suspension
also feature a wide faceseal with soft elastic for improved comfort and
assembly and air inlet components can be quickly removed and
reduced noise. The new airflow distribution minimises the potential
separated for segregated waste streams, where facilities are available.
Features and Benefits:
+ Ready to use out of the box
+Available in two adjustable sizes
S/M and M/L to comfortably fit more
users than previous models
+ Exhalation panel vents the headtop
+Eye and face protection to EN166:2:F:3
(Optical class 2, low energy impact F
and liquid splash 3)
3M™ S-433 Hood
Head, face, neck and shoulder coverage,
as well as providing eye and face protection to
EN166 – liquid splash and low energy impact.
General purpose, cost-effective fabric.
NEW
Premium reusable suspension hoods can be a highly costeffective choice
With a simple turn of the external controller, wearers can shift the
for some high disposal rate environments: just the soiled hood fabric is
location of air flowing over the back of their head to over their temples,
replaced, while the suspension and air ducting can be reused. The new
face and visor. The suspension has independent adjustments for the
designs permit significantly faster user assembly of the entire headtop.
crown size and head circumference, allowing a comfortable, custom fit
The suspension’s new rigid ducting provides a consistent air path. It also
for a wide range of head sizes. An optional size-reducing comfort pad is
has an externally-adjustable airflow control that allows wearers to modify
provided to even further extend the range of compatible head sizes.
the airflow distribution to suit personal comfort needs.
Features and Benefits:
+Adjustable head circumference and crown
size straps to comfortably fit more users
than previous models.
+Optional size reducing comfort pad
for improved fit.
+ External airflow adjustment control
3M™ S-655 Hood
Head, face, neck and shoulder coverage, as well as
providing eye and face protection to EN166 – liquid
splash and low energy impact. Its respiratory seal is
a comfortable, knitted inner collar that is shorter and
thinner than previous models. General purpose,
cost-effective fabric.
NEW
Other 3M™ S-Series Reusable Hoods
3M S-Series
™
Headcovers and Hoods
eet the
tops m ance
d
a
e
h
eries
erform its)
All S-S espiratory Mp air delivery un
r
3
t
c
higheussed with specifi
Replacement Parts
eet the
tops m ance
d
a
e
h
eries
erform its)
All S-S espiratory Mp air delivery un
r
3
t
c
highes ith specifi
(when
(when
3M S-605
Replacement fabric for S-655
3M S-607
Replacement fabric for S-657
used w
3M S-707
Replacement fabric for S-757
Other 3M™ S-Series Headcovers and Hoods
3M™ S-133 Headcover
Head and face coverage, as
well as providing eye and face
protection to EN166 – liquid
splash and low energy impact.
General purpose, costeffective fabric.
3M™ S-333G Headcover
Similar to 3M S-133 headcover
but with a more durable,
soft, quiet, low-linting fabric.
3M™ S-533 Hood
Similar to 3M S-433 hood
but with a more durable,
soft, quiet, low-linting fabric
that more readily drapes
comfortably over the wearer.
40
3M™ S-757 Hood
Similar to 3M S-657 hood
but with a fabric specifically
intended to help capture paint
overspray, minimizing the
potential for paint to flake off
the wearer and onto the work
piece. The fabric also has an
internal film barrier to help
prevent paint contact with
skin or clothes.
3M S-805
Replacement fabric for S-855
Other Hoods: HT-152
All replacement hoods are
available in packs of 5.
3M™ S-657 Hood
Similar to 3M S-655 hood.
The 3M S-657 hood uses
a double shroud design for
its respiratory seal; wearers
can select between seal
designs based on their
personal preference. The
users wear the S-657 by
tucking its inner shroud into
a shirt or protective coverall,
which allows excess air to
be channeled over the body,
providing additional comfort.
3M™ HT-152 Hood
TH3 hood, clear transparent
polyurethane Protection class:
EN12941 TH3 (with 3M™
Jupiter™ Powered Air Turbo)
EN12941 TH1 (with 3M™
Dustmaster™ Powered Air
Turbo)
EN1835 LDH3 (with 3M™
Flowstream™, Vortemp and
Vortex Regulators)
NPF: 500 x TLV
3M™ S-855 Hood
The S-855 hood is
specifically developed for
liquid chemical splash
environments. The hood
has a long outer shroud for
increased coverage and
splash protection.
41
3M™ Modular
Range
3M™ S-Series Reusable Harnesses
Air-Flow Management System
Product Overview – 3M™ S-Series Headcovers and Hoods
The products can all be used in various areas. You can find the hood for your own particular needs in the table below.
For more information visit http://www.3m.eu/worldofcomfort
During development of the premium reusable suspension hoods, the
focus was on comfort. At the heart of this innovative hood is a special
head harness that allows airflow adjustment to suit individual needs.
Application
Air flow –
under total control
Integrated Suspension Headcovers and Hoods
S-133*
S-333 G*
S-433*
S-533*
Premium reusable suspension hoods
S-655*
S-657
S-757*
S-855
HT-152**
Healthcare, laboratories
Pharmaceuticals industry
Features and Benefits:
+ Innovative, light head harness
adjusts to all head sizes
+ Hood is simple to fix
+ Adjustable control for individual
air flow distribution
NEW
Agriculture
Food industry
Cellulose and paper industry
Painting, wallpapering
Renovation work – CFM
Chemical industry
Transportation
General use
Wood processing
* All 3M S-Series hoods can be combined with all 3M™ Powered Air and Supplied Air Delivery Units. When combined with the 3M™ Jupiter™ Powered Air Turbo,
3M S-Series hoods achieve protection class TH3 and can be used to provide protection up to 500 times the relevant TLV (Threshold Limit Value). When combined
with the 3M™ Dustmaster™ Powered Air Turbo, the S-Series hoods achieve protection class TH1 and can be used to provide up to 10 times the relevant TLV. When
combined with the 3M™ Flowstream™, Vortemp™ and Vortex Regulators, they achieve protection class 3A and can be used to provide protection up to 200 times
the relevant TLV.
Opened Valve
Note: The 3M S-Series Headcovers and Hoods meet the lower strength (A) requirements of EN14594. They are approved for use with a range of compressed air
supply tubes that meet both lower and higher strength (A and B) requirements.
**The 3M™ HT-152 can be combined the 3M™ Jupiter™ Powered Air Turbo to achieve protection class TH3 and can be used to provide protection up to 500 times
the relevant TLV. When combined with the 3M™ Dustmaster™ Powered Air Turbo, the system achieves protection class TH1 and can be used to provide up to 10
times the relevant TLV. When combined with the 3M™ Flowstream™, Vortemp™ and Vortex Regulators, they achieve protection class LDH3 and can be used to
provide protection up to 200 times the relevant TLV.
Closed Valve
42
43
3M™ Modular
Range
For a more comprehensive guide to 3M welding
please refer to the welding section
3M™ 400 Series Visors
3M 400 series visors offer the user respiratory protection, but also
3M™ 600 Series Welding Visors
Applications
+ Mixing Processes
+ Paintspraying
+ Chemical Industry
+ Food and Beverage Industry
The 3M 600 series welding visors not only offer respiratory protection
Thanks to the comfortable head harness and knitted
but also face, eye and impact protection in metal working and
faceseal, the welder can wear the welding visor for long
fabrication environments. The various flip-up visor & filter mechanisms
periods of time. The airflow through the visor ensures
allow you to inspect your work whilst the large coverage area gives
reduced sweat build up and can make the welder more
resistant Polycarbonate Visor is ideal for all applications requiring
protection from radiation and sparks. The range also offers choice of
comfortable and efficient.
physical face protection during machining and finishing work, such
lens shades including auto darkening and fixed shade.
EN166 approved eye and face protection, while weighing only 500g.
The 3M™ HT-401 Acetate Visor is an effective solution for painting
applications or working with chemicals. The 3M™ HT-402 scratch
as grinding, drilling and milling.
Features and Benefits:
+The acetate visor provides eye
and face protection to EN166,
liquid splash and low energy impact
+The innovative Quick Release Swivel
(QRS) coupling on the headtop makes
it easy to connect and disconnect
the breathing tube, and it swivels to
avoid loops and kinks in the tube
+ Face seal
3M™ HT-401
Acetate Visor
Weight: 500 g
Protection class:
EN12941 TH2
(with 3M™ Jupiter™ Air Delivery Unit)
prEN146 TH2
(with 3M™ Dustmaster™ Air Delivery Unit)
EN1835 LDH2
(with 3M™ Flowstream™,
Vortemp and Vortex Regulators)*
3M™ HT-402 Visor Headtop
Features and Benefits:
3M™ HT-622 Welding Visor*
3M™ HT-639 Welding Visor*
+ A well-balanced shield
+ Superb coverage
+Respiratory, eye, face and
impact protection
+Conventional or auto-darkening
filters can be fitted
+ Supplied with a 90 x110mm filter
holder able to hold fixed shade or
auto-darkening filters
+Approvals:
EN12941 TH2
(with 3M™ Jupiter™ Air Delivery Unit)
EN12941 TH1
(with 3M™ Dustmaster™ Air Delivery Unit)
EN1835 LDH2 (with 3M™ Flowstream™
Vortex and Vortemp Regulators)
+ Weight: 696g
A super-light shield for welders wanting to
maximise the benefits of the Euromaski™ system.
Wide range of filter shade combinations available.
Headtop weight: 595g
+Supplied with shade 1.7 UV filter, also
available in shades 3 & 5
+Supplied with shade 8 welding filter, also
available in shades 5 & 10
+Total shade range available from 6.7 to 15
Euromaski™ is used with permission of
Euromaski Oy, Finland.
3M™ HT-629 Welding Visor*
Scratch resistant polycarbonate visor providing
face protection approved to EN166, medium energy
impact resistance and molten metal protection
Weight: 500 g
Protection class:
EN12941 TH2
(with 3M™ Jupiter™ Powered Air Turbo)
prEN146 TH2
(with 3M™ Dustmaster™ Powered Air Turbo)
EN1835 LDH2
(with 3M™ Flowstream™,
Vortemp and Vortex Regulators)*
* All 3M 400 Series Headtops shown can be combined with all 3M™
Powered Air and Supplied Air systems. When combined with the 3M™
Dustmaster™ and 3M™ Jupiter™ Air Delivery Units, they achieve
protection class TH2 and can be used to provide protection up to 50
times the relevant TLV (Threshold Limit Value). When combined with
the 3M™ Flowstream™, Vortemp and Vortex Regulators, they achieve
protection class LDH2 and can be used to provide protection up to 50
times the relevant TLV.
44
+Easy-to-fit comfortable,
elasticated, knitted
faceseal
+New comfortable
easy-adjust harness
with double comfort
band
+Harness/airduct in
one robust assembly
+ Super Coverage
+Liftable welding lenses
to allow clear view,
while retaining
respiratory protection
+New airduct system
giving improved airflow
to the face area
The solution for those welders needing a welding
shield with a clear, wide view visor beneath. The
90 x 110mm filter holder hinges down for easy
access. Headtop weight: 794g.
+Supplied without a welding filter,
but with cover lenses
+Conventional or auto-darkening filters
can be fitted
* All 3M 600 series Headtops shown can be combined with all 3M™ Powered Air and Supplied Air systems. When combined with the 3M™
Jupiter™ Air Delivery Units, they achieve protection class TH2 and can be used to provide protection up to 50 times the relevant TLV. When
combined with the 3M™ Dustmaster™ Powered Air Turbo they achieve protection class TH1 and can be used to provide protection up to 10
times the relevant TLV. When combined with the 3M™ Flowstream™, Vortemp and Vortex Regulators, they achieve protection class LDH2 and
can be used to provide protection up to 20 times the relevant TLV.
45
3M™ Modular
Range
3M™ 700 Series Helmets
3M™ 800 Series Helmets
3M 700 series helmets offer the user not only respiratory protection,
The 3M™ HT-748 and 3M™ HT-749 Systems can be equipped with
3M 800 series helmets offer the user not only respiratory protection, but
Applications
but also EN166 approved eye and face protection as well as EN397
either a fixed shade filter or an Auto Darkening Filter in the standard
also EN166 approved eye and face protection as well, EN812 bumpcap
All industrial areas that require eye, face, head and hearing protection e.g:
head protection. The helmet shells are optionally available in different
format 90 x 110 mm / 3 " x 4 ".
protection (3M™ HT-820 Helmet) and EN397 helmet protection
+ Smelting
+ Construction
+ Foundries (grinding, polishing)
+ Welding
colours. For especially hot work areas, the 3M™ HT-707 Helmet
features a heat resistant shell and it is also available with an optional
heat resistant cover. The 3M™ HT-748 and HT-749 Systems offer an
additional glare protection filter is thus especially suitable as a
welding protection solution.
1/4
1/4
(HT-840/HT-880). The 3M™ HT-880 Helmet additionally offers chin
Applications
All industrial areas that require eye, face, head and hearing protection e.g:
shroud or more durable Cordura™ option.
+ Smelting
+ Construction
+ Foundries (grinding, polishing)
+ Welding
Features and Benefits:
+The polycarbonate visor
(optionally available in other materials)
offers eye and face protection to EN166
+Helmet shells provide head protection
to EN397
+Quick Release Swivel (QRS) Coupling
or ease of use
+ Head and face seals
+Positive pressure helps prevent ingress
of contaminant into the headtop
+ Light, well balanced
protection as well as neck and shoulder protection with a lightweight
3M™ HT-701*
Safety helmet, white
Weight: 715 g
EN12941 TH2
(with 3M™ Jupiter™ Air Delivery Unit)
prEN146 TH2
(with 3M™ Dustmaster™ Air Delivery Unit)
EN1835 LDH2
(with 3M™ Flowstream™,
Vortemp and Vortex Regulators)
Other 3M™ Series 700 Helmets
3M™ HT-702*
Safety helmet, blue
Weight: 715 g
Features and Benefits:
+The polycarbonate visor
(optionally available as acetate visor) offers
eye and face protection to EN166 and large
viewing area
+Helmet shells provide head
protection to EN397
+Quick Release Swivel (QRS) Coupling
for ease of use
+The shroud protects
neck and shoulders
+ Flip-up visor
+ Chin protection
+ Ease of maintenance
+ Ratchet adjustment mechanism
3M™ HT-880
Integral Hard Hat, green,
flip-up visor
Weight: 1075 g
EN12941 TH2
(with 3M™ Jupiter™ Air Delivery Unit)
prEN146 TH2
(with 3M™ Dustmaster™Air Delivery Unit )
EN1835 LDH2
(with 3M™ Flowstream™,
Vortemp and Vortex Regulators)*
Other 3M™ 800 Series Helmets
3M™ HT-820*
Bump cap, red
Weight: 845 g
3M™ HT-705*
Safety helmet, green
Weight: 715 g
3M™ HT-840*
Hard hat, green
Weight: 1000 g
3M™ HT-748 / HT-749*
Welding helmet, black,
eye protection filter for
welding work
Weight: 900 g
3M™ HT-707 Helmet*
With additional
radiant heat kit
Weight: 850 g
3M™ HT-707*
Safety helmet, white,
heat resistant shell
Weight: 715 g
As an alternative to the Athermal filter, the HT-748 / HT-749 can be equipped with
the optional Auto Darkening Filter in the standard format 90 x 110 mm.
* EN12941 TH2 (with 3M™ Jupiter™ Powered Air Turbo)
prEN146 TH2 (with 3M™ Dustmaster™ Powered Air Turbo)
EN1835 LDH2 (with 3M™ Flowstream™, Vortemp and Vortex Regulators)
46
All 3M 700 series Headtops shown can be combined with all 3M™ Powered Air and Supplied Air systems. When combined with the 3M™ Dustmaster™ and 3M™ Jupiter™ Powered Air Turbos, they achieve protection
class TH2 and can be used to provide protection up to 50 times the relevant TLV (Threshold Limit Value). When combined with the 3M™ Flowstream™, Vortemp and Vortex Regulators, they achieve protection class LDH2
and can be used to provide protection up to 50 times the relevant TLV.
* EN12941 TH2 (with 3M™ Jupiter™ Powered Air Turbo)
prEN146 TH2 (with 3M™ Dustmaster™ Powered Air Turbo)
EN1835 LDH2 (with 3M™ Flowstream™, Vortemp and Vortex Regulators)
All 3M 800 Series Headtops shown can be combined with all
3M™ Powered Air and Supplied Air systems. When combined with the
3M™ Dustmaster™ and 3M™ Jupiter™ Powered Air Turbos, they
achieve protection class TH2 and can be used to provide protection up to
50 times the relevant TLV (Threshold Limit Value). When combined with the
3M™ Flowstream™, Vortemp and Vortex Regulators, they achieve protection class LDH2 and can be used to provide protection up to 50
times the relevant TLV.
47
3M™ Modular
Range
3M™ Jupiter™ Powered Air Turbo
Once a suitable headtop has been selected, a suitable air source should
be selected for your application. The Jupiter powered air turbo is a
comfortable, easy-to-use powered air purifying turbo unit that provides
protection against solid particulates, gases or vapors, or against a
combination of these depending on the types of filter cartridges used.
An integrated acoustic and visual alarm indicates if airflow to the
Accessories for 3M™ Jupiter™ Powered Air Turbo
Applications
+ Metalworking
+ Automotive Industry
+ Demolition and Stripping
+ Painting
+ Chemical and Pharmaceutical Industry
+ Agriculture
+ Woodworking
A broad range of accessories is available to adapt the 3M™ Jupiter™
Powered Air Turbo to different work conditions – ranging from various
filters to different battery packs to an Intrinsically Safe (IS) cover.
headtop is reduced or battery charge runs low. The Jupiter powered air
turbo is also available with an optional Intrinsically Safe (IS) cover.
Features and Benefits:
+ ON/OFF switch with control module
+ Breathing tube connection
3M™ Jupiter™ Powered Air Turbo Unit
EN12941
Protecting class*
Weight815 g (with 4-hour battery,
without filter and belt)
Accessories
Filter types:
P
A2P
ABE1P
A2BEK1P
K1P
Prefilter
+Decontamination comfort
belt for a improved fit and easier cleaning
+ Filter connection
+ Five different filter types
+ Modern, ergonomic design
+Minimal maintenance
required
+Can be worn during shower
decontamination
+Can be used in potentially
explosive atmospheres
+ Optional braces available
+Also available as a
Ready-to-Use Pack
including Jupiter™ turbo unit,
A2P filters, pre-filters,
breathing tube, 8 hour battery (NiMH)
and battery charger
+Intelligent battery charger to
optimise battery life
Batteries:
4 or 8-hour battery,
4-hour IS battery
3M™ Jupiter™ Powered
Air Turbo with IS Cover
and battery
EN12941
Protection class*
II 2 GD
EEx ib IIB T3
(Ta = -20°C to +40°C)
T55°C.
Electronic
battery charger
10
7
9
2
6
3
1
4
8
Airflow tubes:
Airflow indicator
(white ball)
Calibration tube
(black ball)
5
1. 3M™ Jupiter™ 3. Belt clip
Turbo Unit
5. Pre-filters
7. IS cover
9. Battery charger
2. Belt
6. Battery
8. Breathing tube
10. Airflow tubes
4. Filters
* Please see the data of the headtop used with the unit for information
on respiratory protection class ratings.
48
49
3M™ Modular
Range
3M™ Dustmaster™ Powered Air Turbo
The Dustmaster powered air turbo is a robust industry-proven turbo unit.
The Dustmaster Turbo system provides respiratory protection against
airborne particulates, dust, nuisance odours and welding fumes.
3M™ Flowstream™ Regulator
Applications
+ Metalworking
+ Woodworking
+ Welding
This regulator can be combined with all 3M modular Headtops and
The various components of the 3M™ Supplied Air System are
ensures an individually adjustable, constantly controlled airflow. The
connected using plug and socket hose couplings (Rectus 25, CEJN ‘342’
Flowstream regulator requires a working pressure of 3-8 bar and
or Broomwade connectors available). An auxiliary port allows a spray
it is extremely quiet due to the integrated silencer (< 65 dBA). The
gun or other air tool to be connected to the Flowstream without causing
integrated activated charcoal filter odour from supplied air. Five different
variations in headtop airflow. An integrated warning whistle warns the
compressed air supply tubes are available to connect the Flowstream
user of low airflow into the headtop.
regulator to the compressed air supply. The 3M™ AirCare™ Filtration
Unit can be connected inline to clean the compressed air before it is fed
to the regulator.
Features and Benefits:
+ Breathing tube connection
+Battery charger connection –
No need to remove battery
for charging
+ Belt
+Durable housing
+ Minimal maintenance required
+ Dustproof ON/OFF switch
+ Easy to clean
+ Compact, lightweight construction
+ Robust, industry proven design
+ Integrated particulate filter
+ Replaceable filter cartridge
(optional prefilter)
+Excellent value product offering low cost
protection & productivity benefits
+Also available as 3M™ Dustmaster™ Ready
To Use Kit which includes as above with 2 x
pre-filters, breathing tube, battery charger
3M™ Dustmaster™ Powered Air Turbo Unit
prEN146
EN12941
Protection class*
Weight1.130 g (with battery,
filters and belt)
Features and Benefits:
+ Integrated low airlfow warning whistle
+ QRS Breathing tube
+ Integrated silencer
+ Lockable Airflow adjustment knob
+ Removable, Integrated activated charcoal filter
+ Belt swivel mechanism
+Auxiliary connection for air tools
(e.g. spray gun)
+ Compressed air connection
+ Easy to clean
+ Air flow 150-305 l/min
Applications
+ Chemical and pharmaceutical industry
+ Paintspraying
+ Metal finishing
3M™ Flowstream™ Air Regulator System
Approval EN 1835
Protection class*
Weight
550 g
Accessories
+ 8-hour NiMH battery
+ Electronic battery charger
+ P filter
+ P filter with nuisance odour filter
+ High efficiency P filter
+ Breathing tubes
3M™ Dustmaster™ Ready-to-Use Pack
* Please see the data of the headtop used with the unit for information
on protection class ratings.
50
* Please see the data of the headtop used with the unit for information
on protection class ratings.
51
3M™ Modular
Range
3M™ Vortex/Vortemp Air Cooling/Heating Regulator
3M Vortex and Vortemp – your personal air conditioning unit on your
belt. In many areas of industry, workers are sometimes exposed
to uncomfortably high or low temperatures in addition to high
concentrations of hazardous contaminants. These are the situations
Applications
+ Heavy Industry
+ Foundries (high radiant heat)
+ Construction Industry (cold outdoor temperatures)
+ Manufacturing
3M™ Breathing Tubes
A breathing tube connecting the air source with the headtop is
required to ensure that clean air reaches the headtop reliably and with
unrestricted airflow. The breathing tubes offered are compatible with all
modular headtops and air sources. You can choose either a lightweight
where the Vortex or Vortemp systems are ideal for use in the supplied
polyurethane breathing tube or a robust rubber breathing tube.
air respirator system to individually cool or heat the user’s incoming
A special flame-resistant sleeve lengthens the life of the breathing tube
supplied air by up to 25 °C.
and protects it from flying sparks.
Features and Benefits:
+ Heating/cooling effect
+ Breathing tube
+ Integrated low-airflow warning whistle
+ Compressed air connection
+ Belt mounting with an insulating pad
+ Working pressure 6-10 bar
+ Air volume 150-600 L/min
+Adjustable
temperature controller
3M™ Vortex Air Cooling Regulator
EN 1835
Protection class*
Weight585 g
incl. belt and pad
Headtops
Breathing Tubes
BT-20
(only for S-Series)
Vortemp Air Heating Regulator
Approval: EN 1835
Protection class*
Weight: 655 g
incl. belt and pad
BRT-23
(only for Headtop HT-152)
BT-922
Disposable
Breathing Tube Cover
Rubber
Breathing Tube
Art. No. 0080041P
PU Lightweight
Breathing Tube
Art. No. 0080042P
Flame Resistant
Sleeve
Art. No. 0080800P
Air Sources
* Please see the data of the headtop used with the unit for information
on protection class ratings.
52
53
3M™ Modular
Range
3M™ AirCare™ Filtration Unit
3M™ Compressed Air Supply Tubes and Couplings
The AirCare™ ACU01 / ACU02 filtration unit can be
Various compressed air supply tubes are available to connect the
combined with all 3M™ Supplied Air Respirator Systems.
3M™ Air Regulator to the facility’s compressed air system to meet
different requirements.
The tubes are available in different lengths and they guarantee high
quality connections to all components. The tubes have a 3/8" male
pipe thread BSP at each end to allow flexibility in the choice of coupling
systems.
Features and Benefits:
+Can be used for up to
three users (or two users
plus air tool)
+Differential
Pressure Indicator
+ Pressure regulator (lockable)
+ Pressure gauge
+ Pre-filter
+ Semi-Auto Drains
+ Coalescing filter
+Includes
3/8" to 1/2" BSP adapter
+Includes 2 adapters,
3/8" BSP to 3/8" male
pipe thread BSP
+Adsorber filter with
activated charcoal
3M™ AirCare™ Filtration Unit ACU02,
Freestanding (Art. No. 3000622P)
Input: 1/2" or 3/8" female pipe thread BSP
Output: 3/8" BSP
Features and Benefits:
+3/8" BSP
+Flexibility
+3/8" BSP
7.5 m
Coiled tube
Art. No. 3080040P
‘
Compressed Air Supply Tube and Couplings
5m
Light duty tube
Art. No. 3080035P
10 m
Standard duty tube
Art. No. 3080030P
3M™ AirCare™ Filtration Unit ACU01
Wall Mount
(Art. No. 3000621 P)
Input: 1/2" or 3/8"
female pipe thread BSP
Output: 3/8" BSP
+The three-stage filtration system supplies
highest quality air to the Supplied Air Respirator
System and compressed air tools by removing
water and oil aerosols, particles and odors from
the facility-supplied compressed air.
+The Filtration Unit is available as
either a portable freestanding unit or
wall-mounting unit.
+Output pressure can be adjusted with the
integrated pressure regulator.
The 3M™ AirCare™ Filtration Unit can be
used with input pressures up to 10 bar.
Coupling set for all CASTs 3/8" BSP
Adapter
3/8" BSP
2-Way Branch Set
3/8" female pipe
thread BSP,
incl. 3/8" BSP adapters
Art. No. 3120301P3
Wall mounted
54
10 m Standard tube
antistatic, high
temperature hose
Art. No. 3080072P
3-Way Branch Set
3/8" BSP,
incl. 3/8" BSP adapters
Art. No. 3120300P3
30 m
Standard duty tube
Art. No. 3080031P
Rectus 25
Art. No. 5301282P3
Broomwade
Art. No. 5301280P3
CEJN ‘342’
Art. No. 5301281P3
Connector
for compressed air
supply tube 3/8" BSP
Art. No. 5301285P
Coupling plugs for all regulators 1/4" BSP
Rectus 25
Art. No. 5301252P3
CEJN ‘342‘
Art. No. 5301253P3
Broomwade
Art. No. 741019-00P3
Connection Set
for spray gun
Art. No. 0230545P3
55
3M™ Individual
Systems
3M™ Airstream™ Powered Air Helmet
The Airstream™ Helmet is a Powered Air system headtop where
the turbo and filter components are integrated into the helmet. The
helmet is powered by a lightweight belt-mount battery. Airstream™
Helmets have been very popular in industry for many years. They offer
3M™ Powerflow™ Plus Powered Air Facepiece
Applications
+ Metalworking Industry
+ Foundries
+ Welding
+Construction Work
The Powerflow Plus powered air facepiece consists of a
3M™ Crusader Full Facepiece and facepiece-mounted turbo unit
Applications
+ Asbestos Stripping
with P3 filter.
Powerflow Plus system offers effective protection against potential
protection upto class THP2 and an NPF of 50 x TLV against particulate
health hazards when stripping or disposing of asbestos containing
aerosols.
products. The combination of full facepiece, turbo unit and particulate
filter complies with protection class TM 3 PSL (as per prEN 147) and
can be used to provide protection up to 2000 times the relevant TLV.
Features and Benefits:
+Polycarbonate visor
options offer eye and
face protection to EN166
+Lightweight, exceptionally
robust helmet shell
+Integrated turbo motor
including filter and prefilter
+Can be optionally equipped
with earmuffs
+ Head and face seals
+Well balanced system guarantees
high wearing comfort
+Lightweight belt-mounted
5 or 8-hour battery
+ Electronic battery charger
+Combines respiratory, head,
eye and face protection;
glare and hearing protection optional
3M™ Airstream™ Helmet AH4
Protection against solid and liquid particles
Features and Benefits:
+Lightweight full facepiece with
wide viewing area (panoramic vision)
+ Facepiece made of silicone rubber
+Equipped with one P3 filter for use
against solid and liquid aerosols
+Compact turbo unit with
DIN knuckle threads
+Belt-mounted
8-hour system battery
+ Electronic battery charger
+Smooth shape allows easy
decontamination
3M™ Powerflow™ Plus Powered Air Facepiece
Approval prEN 147 (rev.)
Protection class
TM3
APF
2000 x TLV (Turbo unit ON),
1000 x TLV (Turbo unit OFF)
Other 3M™ Airstream™ Helmets
3M™ AH1 Helmet
THP1
NPF 10 x TLV
Accessories
P3 Filter
8-hour battery
Electronic battery charger
3M™ AH7 Helmet
Protection against
solid particles plus heat
resistant shell.
Warning: Respirator systems with open headtops only provide respiratory
protection while the turbo motor is running. If the motor fails, you must
leave the contaminated area immediately.
56
57
3M™ Individual
Systems
3M™ S-200™ Supplied Air System
The S-200 supplied air system is the most comfortable and versatile
supplied air system for all 3M™ 6000 and 3M™ 7000 Series Half
3M™ Visionair™ Supplied Air Visor System
Applications
+ Painting
The Visionair supplied air visor system offers a stand alone solution for
paint-spraying applications. Paint-spraying guns and other hand-held
and Full Facepieces. The S-200 supplied air system can be used as a
air-tools can be attached and powered by the supplied air spray gun
standard airline respirator or in dual-mode with filter back-up when air
hose.
supply is disconnected.
Features and Benefits:
+Breathing tube to air regulator
+ Half Facepiece 7500 Series
+Bayonet connector for
breathing tube
+ S-200 Air Regulator
+ Pressure relief valve
+Safety:
High respiratory protection
+Comfort: Swirling air flows
in from the sides
+Lightweight:
Perfectly balanced system
+ Low maintenance
3M™ S-200™ Supplied Air System
Approval: EN139
NPF: Half facepiece: 50 x TLV
Full facepiece: 200 x TLV
Working pressure: 3-8 bar
Airflow to facepiece: 140-330 l/min
Features and Benefits:
+ Adjustable flip-up acetate visor
+Protective hood for neck and hair
(optional extra)
+Choice of left- or right- handed
mounting capabilities
+ Nuisance odour filter
+ Adjustable air flow
+High respiratory
protection class
3M™ Visionair™ System
Weight: 460g
Approval: EN270, EN1835 LDH3
NPF: 200 x TLV
Accessories
The 3M™ S-200™ System can be optionally
combined with all 2000, 5000 and 6000 Series
Filters by 3M.
3M™ 2000 Series
Particulate Filter
3M™ Visionair™
Supplied Air Visor System
3M™ S-200™ Supplied Air System
without additional filters
3M™ 5000
Particulate Filter
Inserts
3M™ 6000 Series
Gas/Vapor and
Combination
Warning: Respirator systems with open headtops only provide respiratory
protection while the turbo motor is running. If the motor fails, you must
leave the contaminated area immediately.
58
59