PT-572 HDMI Over Twisted Pair Receiver The PT-572 is a twisted pair receiver for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted pair signal back to an HDMI signal. PT-572 FEATURES Max Data Rate - 1.65Gbps. HDTV Compatible. HDCP & HDMI 1.3 Compliant. System Range - Up to 90m (295ft) at 1080i/SXGA, or up to 30m (98ft) at 1080p/UXGA on shielded BC-DGKat524 cable; 90m (295ft) at 1080i, or up to 60m (197ft) at 1080p/UXGA on shielded BCDGKat623 cable. Cable - For optimum range and performance, use Kramer's BC-DGKat524 and BCDGKat623. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5 and CAT 6 cables may not reach these ranges. Passes EDID (Extended Display Identification Data). Status LEDs - ON (red), Transmit (green). Power Connect™ System -A single connection to the transmitter powers the receiver. Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter. TECHNICAL SPECIFICATIONS INPUTS: 1 CAT 5 OUT on an RJ-45 connector. OUTPUTS: 1 HDMI connector. BANDWIDTH: Supports up to 1.65Gbps bandwidth per graphic channel. COMPLIANCE WITH HDMI STANDARD: Supports HDMI 1.3 and HDCP. POWER SOURCE: 12V DC, 250mA (transmitter and receiver together). DIMENSIONS: 6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H. WEIGHT: 0.14kg (0.3lbs). ACCESSORIES: Power supply. OPTIONS: RK-4PT 19” rack adapter.