Cisco SPA 525G Telephone Bluetooth Headset User Guide

Hosted IP Phone System
Cisco SPA 525G Telephone Bluetooth Headset User Guide
Enable Bluetooth feature in Cisco SPA 525G telephone
 Press the [Menu] button
 Scroll down to [User Preferences] and press [Select]
 Scroll down to [Bluetooth Configuration] and press [Select]
 With [Bluetooth] selected, press the right arrow key until the blue check mark appears indicating that the feature is
enabled
 Press [Set]
 The telephone display will go blank and a pop up screen will appear with a message stating, “Refreshing Voice
Component.” The softkey functions on the telephone display will blink a few times. Once this process has finished, the
telephone will be available to pair with your Bluetooth headset.
Pair Bluetooth Headset to Cisco SPA 525G telephone
 Press the [Menu] button
 Scroll down to [User Preferences] and press [Select]
 Scroll down to [Bluetooth Configuration] and press [Select]
 Scroll down to [Bluetooth Mode], press the right arrow key, and select [Both]
Note: The Bluetooth Mode must be set to “Both”, or the telephone will not be able to see the Bluetooth headset.
 Scroll down to [Bluetooth Profiles] and press the right arrow key to enter the [Select Bluetooth Profile] screen
 Prepare your Bluetooth headset to start scanning. Refer to your Bluetooth headset documentation for instructions.
 Once you have prepared your Bluetooth headset to start scanning, press [Scan] on the Cisco SPA 525G telephone in
order to scan for the Bluetooth headset. This process may take up to one minute.
 Once the Cisco SPA525G telephone has found the Bluetooth headset, make sure the Bluetooth headset is highlighted
on the telephone display and press [Connect]
 Scroll down to [PIN] and enter the PIN for your Bluetooth headset. Refer to your Bluetooth headset documentation for
this PIN number.
 Once the PIN has been entered, scroll down to [Connect Automatically], press the right arrow key, and select [On]
 Press [Connect] to pair the Cisco SPA525G telephone to your Bluetooth headset
For Additional Training and Support
• Visit www.popp.com ”Support””Hosted IP Phone System Resources”
• Call POPP Communications at 763-797-7900
© POPP.com, Inc. All rights reserved.
Service 24x7 @ 763-797-7900 or 1-800-234-POPP
Page 1 of 1
5/21/15
Open as PDF
Similar pages