QuickSpecs
HP 3PAR StoreServ 10000 Storage
Overview
With the introduction of the HP 3PAR StoreServ 10000 Storage with Thin Built In™, HP 3PAR remains the first storage vendor to
incorporate thin capabilities into array hardware. The two new HP 3PAR® Gen4 ASIC in each HP 3PAR StoreServ 10000 Controller Node
provides hyper-efficient, silicon-based engines that drive simple, on-the-fly storage optimizations to maximize capacity utilization
while delivering high service levels. The revolutionary innovations of HP 3PAR StoreServ 10000 Storage make it the heir to HP 3PAR TClass Storage.
HP 3PAR StoreServ 10000 Storage
What's New
HP 3PAR StoreServ 10400 Storage with maximum 384GB of total cache
Increase in maximum raw capacity supported in the HP 3PAR StoreServ 10000 Storage:
1.6PB on HP 3PAR StoreServ 10400
3.2PB on HP 3PAR StoreServ 10800
New 480GB and 920GB SSD drives and 4TB NL SAS drives in HP 3PAR StoreServ 10000 Storage
FIPS 140-2 certified Data-At-Rest encryption with self-encrypting drives on HP 3PAR StoreServ 10000 Storage
New Premier Flex OM4 optic cables and Direct Attach Copper cables on HP 3PAR StoreServ 10000 Storage
DA - 14103 North America — Version 19 — January 17, 2014
Page 1
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Overview
Summary
Block Storage
10400 (Old)
File Storage
10400 (New)
10800
HP StoreServ File
Controller13
Number of Controller
2 or 4
2 or 4
2, 4, 6, or 8
Upto 8
Nodes
HP 3PAR Gen4 ASICs
4 or 8
4 or 8
4, 8, 12 or 16
Not Applicable
Management Processors 4 - 8 Quad-Core 2.83 GHz 4 - 8 Quad-Core 2.83 GHz 4 - 16 Quad-Core 2.83 GHz 1 - 16 four-core 2.4 GHz
Total Cache
96 - 192 GB
192 - 384 GB
192 - 768 GB
None
Control Cache
32 - 64 GB
64 - 128 GB
64 - 256 GB
None
Data Cache
64 - 128 GB
128 - 256 GB
128 - 512 GB
None
Maximum Host Ports
96 ports
96 ports
192 ports
4 - 128
Fibre Channel Host
0 - 96 ports
0 - 96 ports
0 - 192 ports
Not Applicable
Ports1
10Gb/s iSCSI Host
0 - 16 ports
0 - 16 ports
0 - 32 ports
Not Applicable
Ports10
10Gb/s FCoE Host
0 - 48 ports
0 - 48 ports
0 - 96 ports
Not Applicable
Ports11
1GbE/10GbE Network
Not Applicable
Not Applicable
Not Applicable
4 - 128
Ports
Built-in Remote Copy
2 - 4 ports
2 - 4 ports
2 - 8 ports
None
(RCIP) Ports14
Number of Drives
162 - 960 drives
162 - 960 drives
162 - 1,920 drives
2
Raw Capacity (approx.)3
4.84 - 1600 TB4
4.84 - 1600 TB4
4.84 - 3200 TB4
2x450GB for O/S mirror
Capacity Details
RAID Levels
RAID 5 Data to Parity
Ratios
RAID 6 Data to Parity
Ratios
Drive Capacities
(approximate GB4)
(RAID levels, parity ratios,
and drive capacities all
mixable within the same
Storage System)
Number of Drive Chassis
(Each Drive Chassis holds
up to 40 drives in 4U)
RAID 0, 1, 5, MP5
2:1 - 8:1
RAID 0, 1, 5, 612
2:1 - 8:112
4:2, 6:2, 8:2, 10:2, 12:2, 14:2
4:2, 6:2, 8:2, 10:2, 12:2,
14:212
Not Applicable
400 SSD6, 480 SSD6, 920 SSD6,
300 15K FC, 600 15K FC, 300 15K SAS7, 450 10K SAS7, 900 10K SAS7,
2000 7.2K SAS NL7, 4000 7.2K SAS NL8
29 - 24 chassis
29 - 48 chassis
Not Applicable
NOTE: Support for SAS drives on HP 3PAR StoreServ 10000 Storage is currently available with HP 3PAR OS version 3.1.2 and later
versions.
NOTE: Native FCoE support is available only for limited host configurations. Please check with your regional manager for more details
NOTE: A dedicated CNA is required for FCoE host connectivity
DA - 14103 North America — Version 19 — January 17, 2014
Page 2
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Overview
NOTE: The 1600TB and 3200 TB maximum raw capacity limits for the HP 3PAR StoreServ 10400 and 10800 Storage respectively are
applicable only to systems running HP 3PAR OS version 3.1.3 or later
1 Each port is full bandwidth 8 Gbit/s Fibre Channel capable
2 Recommended minimum is 32 drives which results in a 9.6 TB minimum raw capacity.
3 Maximum raw capacity currently supported with any and all drive types
4 For storage capacity, 1 GB = 1,024,000,000 bytes and 1 TB = 1,000 GB
5 RAID MP is HP 3PAR Fast RAID 6 Technology
6 SSDs are Solid State Drives
7 SAS drives are Serial Access SCSI Drives
8 NL drives are Nearline (7.2k) disks
9 Recommended minimum is 4 drive chassis per pair of controller nodes
10 Each port is full bandwidth 10 Gbit/s iSCSI capable
11 Two built-in 1-GbE RCIP ports per node pair; maximum of 8 usable; RCFC works out of the FC Host ports
12 Applies to the array storage assigned to 3PAR StoreServ File Controller for file services
13 For details, please refer to the 3PAR StoreServ File Controller section in this document
14 Each port is full bandwidth 10 Gbit/s FCoE capable
NOTE: Specifications are subject to change without notice
Host OS Support
Citrix® XenServer® | HP-UX® | IBM® AIX®
Microsoft® Windows® Server, including Microsoft® Hyper-V™
OpenVMS* | Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris
Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization
SUSE® Linux® Enterprise | VMware vSphere™
* Registered Release
For latest information on supported operating systems refer to Single Point of Connectivity Knowledge for HP Storage Products
(SPOCK): http://www.hp.com/storage/spock
DA - 14103 North America — Version 19 — January 17, 2014
Page 3
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Features
Get Thin and Stay Thin
The revolutionary, zero-detect capable HP 3PAR Gen4 ASIC is a hyper-efficient storage optimization
engine designed to power "fat-to-thin" volume conversions in silicon while preserving superior
performance levels. Fat-to-thin volume conversions boost capacity utilization by removing allocated but
unused space from traditional, "fat" storage volumes.
With the HP 3PAR Gen4 ASIC's built-in, hardware-based zero-detection capabilities, migration of "fat"
volumes from other storage platforms to new "thin" volumes on HP 3PAR Storage is achieved with the
greatest speed possible and without the application disruption of software-based implementations. The
HP 3PAR Gen4 ASIC's enables the automatic migration of data from sparsely used pages to enable 128MB
regions to be reclaimed for re-use by other volumes. With conversions taking place at the hardware level,
more parallel memory transactions are possible and system performance is not impacted like it is with
software-based approaches to volume optimization. Thin Built In capabilities within HP 3PAR StoreServ
10000 Storage also power the ongoing, automated optimization of thin provisioned volumes on HP 3PAR
Storage, so thin volumes stay thin.
Building Block for Cloud
Computing
Building a converged infrastructure to support cloud and self-service computing models requires a high
degree of virtualization that places new demands on storage. With their distinct architectural advantages,
thin hardware capabilities, and superior performance, HP 3PAR P10000 Storage is purpose-built to meet
the demands of highly virtualized environments. HP 3PAR P10000 Storage gives enterprises and service
providers the agility to respond quickly to changing business needs while maintaining the resiliency that
"always-on" businesses demand.
DA - 14103 North America — Version 19 — January 17, 2014
Page 4
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Software
Start Thin. HP 3PAR Thin HP 3PAR Thin Provisioning Software improves storage system efficiency and optimizes capacity utilization
system-wide. It does this by addressing the problem of capacity over-allocation through eliminating the
Provisioning Software
need to dedicate storage capacity on a per-application basis. Since its introduction, HP 3PAR Thin
Provisioning Software has given HP 3PAR Storage clients the ability to meet Green IT targets and reduce
capacity purchases. Thin Provisioning makes this possible by cutting SAN costs, floor space requirements,
and energy expenses by up to 75% and decreasing administration time by up to 90%. It does this by
allowing organizations to purchase only the disk capacity they actually need, only as they actually need it
through eliminating the need for up-front capacity allocation and dedicating resources to individual
applications. This prevents clients from paying to power, house, and cool disks that they may not need for
months or years to come, or may never actually need.
Get Thin. HP 3PAR Thin
Conversion Software
With HP 3PAR Thin Conversion Software, a technology refresh no longer requires a terabyte-for-terabyte
replacement, but instead offers the opportunity to eliminate 70-80% of the legacy capacity in a client's
storage environment, simply and rapidly. Leveraging the zero-detection capability built into the HP 3PAR
ASIC, the new Gen4 ASIC combined with HP 3PAR Thin Conversion Software, still effectively and rapidly
"thin" a heterogeneous data center to one-quarter of its original size or less while preserving service
levels, and without impacting production workloads. The new ASIC enables the automatic migration of
data from sparsely used pages to enable 128MB regions to be reclaimed for re-use by other volumes,
driving efficient use of space beyond what was available with the Gen3 ASIC. This solution not only makes
a technology refresh more affordable, but it reduces up-front capital costs as well as ongoing operational
and environmental costs associated with powering, cooling, and housing storage equipment. It also
provides space and power consumption relief for data centers approaching maximum density.
In an ideal world, all storage volumes would start thin using HP 3PAR Thin Provisioning Software. But in
some cases, starting thin has not been an option, particularly when it comes to data stored on legacy
arrays from traditional storage vendors. HP 3PAR Thin Conversion Software uses a virtualization mapping
engine for space reclamation called the HP 3PAR Thin Engine, together with the unique hardware
capabilities of the HP 3PAR Gen4 ASIC to extend the benefits of thin provisioning to existing storage
volumes. In tandem with the HP 3PAR Gen4 ASIC, Thin Conversion enables inline, wire speed "fat-to-thin"
conversions compatible with any host volume. HP 3PAR Utility Storage is the only storage platform to
offer this built-in, hardware-accelerated, fat-to-thin conversion capability. With HP 3PAR Thin Conversion
Software, clients can rapidly and non-disruptively shrink storage footprint, reduce storage TCO, and meet
Green IT targets.
Stay Thin. HP 3PAR Thin To realize the ultimate efficiency and cost-saving benefits of starting thin or getting thin, storage also
Persistence Software and needs to stay thin. An industry first, HP 3PAR Thin Persistence Software ensures that thin volumes on the
array stay as lean and efficient as possible. Thin Persistence Software accomplishes this by using the HP
Thin Copy Reclamation
3PAR Thin Engine with the system's built-in zero-detect capability to reclaim unused space associated
with deleted data. With Thin Persistence, space reclamation on HP 3PAR arrays takes place simply, quickly,
and without disruption to production workloads.
Thin Copy Reclamation is an HP 3PAR Operating System Software feature that performs a similar function
to HP 3PAR Thin Persistence Software, but uses the HP 3PAR Thin Engine to reclaim unused space from
thin copies (virtual copy snapshots and remote copies) rather than thin volumes.
On average, HP 3PAR Storage clients already purchase 60% less capacity than with traditional storage
arrays. With HP 3PAR Thin Persistence and Thin Copy Reclamation, customers can improve this average
capacity savings by another 10% for a total savings of up to 70%. Volumes and snapshots can now stay
thin to help sustain Green IT targets, defer the cost of purchasing raw capacity to handle new data growth,
DA - 14103 North America — Version 19 — January 17, 2014
Page 5
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Software
and keep costs down without the need to purchase special host-based software or retaining professional
services.
HP 3PAR Peer Motion
Software
HP 3PAR Peer Motion Software is a non-disruptive, do-it-yourself data migration tool for enterprise
Storage Area Networks. With Peer Motion, HP 3PAR Storage customers can load balance I/O workloads
across systems at will, perform technology refresh seamlessly, cost-optimize asset lifecycle
management, and lower technology refresh capital expenditure. Unlike traditional block migration
approaches, Peer Motion enables customers to migrate storage volumes between any HP 3PAR Storage
online, non-disruptively, and without complex planning or dependency on extra tools. Peer Motion
leverages HP 3PAR Thin Built In™ technology to power the simple and rapid conversion of inefficient, "fat"
volumes on source arrays to more efficient, higher-utilization "thin" volumes on the destination HP 3PAR
Storage.. Peer Motion Manager is an add-on application that orchestrates all stages of the data migration
lifecycle to ensure data migration is simple and fool-proof.
HP 3PAR StoreServ Data
Encryption
The HP 3PAR StoreServ Data Encryption enables the encryption for all the data that is stored on the
internal drives of the 3PAR StoreServ Storage. The 3PAR StoreServ Data Encryption solution encrypts and
decrypts all data written to and read from the media automatically. The 3PAR StoreServ Data Encryption
solution encrypts the data so that data cannot be read off a drive that is removed from the 3PAR Storage.
In the event of a failure of the drive or the theft of a drive, the proper authentication key is required to be
entered to gain access to the data stored within the drive. This method of encryption allows the user the
comfort knowing all data contained on the drive is protected against internal and external risks
HP Storage Management The HP Management Pack for Systems Center Operations Manager provides seamless integration with
Microsoft Systems Center Operations Manager and now System Center Essentials by integrating
Pack for Microsoft
predefined discovery and state monitoring policies, event processing rules and tasks, and diagram and
System Center
topology views for the storage system.
For more information:
http://h18000.www1.hp.com/products/quickspecs/14249_na/14249_na.html
HP Storage Management Pack can be downloaded free from the following website:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=SCOM
DA - 14103 North America — Version 19 — January 17, 2014
Page 6
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Service and Support, HP Care Pack, and Warranty Information
Warranty
3 Year, On-site Warranty Service. 7x24 4-hour remote response with next business day on-site response
HP warrants only that the Software media will be free of physical defects for a period of ninety (90) days
from delivery.
For more information about HP's Global Limited Warranty and Technical Support, visit:
http://www.hp.com/products/storageworks/warranty
Service and Support
Technology Services for increased uptime, productivity and ROI
TRUST HP storage technology experts for every level of service and support. Our integrated portfolio of
Services for storage help customers reduce costs, optimize data, streamline storage management, and
improve backup and recovery. Capitalizing on HP Storage Systems' capabilities requires a service partner
who understands your increasingly complex environment. Team with the people who know HP
infrastructure hardware and software best-the experienced professionals at HP Services.
Protect your business beyond warranty
Warranty protects against manufacturer defects, however warranty uplifts, such as HP Care Pack Services
protect the business-by reducing downtime risks and providing operational consistency for missioncritical and standard business computing.
NOTE: SSDs have a limited number of writes that can occur before reaching the SSD's write endurance
limit. This limit is generally high enough so wear out will not occur during the expected service life of an HP
3PAR StoreServ under the great majority of configurations, IO patterns, and workloads. HP 3PAR
StoreServ tracks all writes to SSDs and can report the percent of the total write endurance limit that has
been used. This allows any SSD approaching the write endurance limit to be proactively replaced before
they are automatically spared out. An SSD has reached the maximum usage limit once it exceeds its write
endurance limit. Following the SSD warranty period, SSDs that have exceeded the maximum usage limit
will not be repaired or replaced under HP support contracts.
What HP Storage Technology Services can do for you
HP Storage Technology Services can help you design, deploy, test, integrate, support, and manage IT and
infrastructure solutions. HP storage lifecycle support services offers a full spectrum of customer carefrom technology support to complex migrations to complete managed services.
Choose the right level of support, deployment and integration services
HP support recommendations are designed to help you enhance technology operations and lower risk-and
make it easier for you to seek the right balance between affordability and service-level commitments.
Depending on your individual support needs, choose from three levels of care that cover the entire
lifecycle to better address your needs-Optimized Care, Standard Care, and Basic Care. If none of our
support recommendations meet your needs, we can tailor a service solution for your unique support
requirements. Only HP brings together deep expertise, proactive and business critical support and a strong
partner network-plus, a full set of infrastructure services designed to power a Converged Infrastructure.
Optimized Care - delivers
best performance and
stability through
deployment and proactive
management practices
HP Critical Service-Designed for environments where downtime cannot be tolerated, HP monitors your
environment around-the-clock, 365 days a year. We implement improvement projects to mitigate risks
and reduce incidents. If outages do occur, they are addressed immediately with access to our dedicated
critical support escalation resources.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1613ENW.pdf
DA - 14103 North America — Version 19 — January 17, 2014
Page 7
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Service and Support, HP Care Pack, and Warranty Information
Standard Care - maintains
high level of uptime, along
with expert help to cut the
cost and complexity of
implementation and
support
HP Proactive 24 Service-This is the right choice for environments where some downtime is acceptable. HP
helps manage your IT environment for improved performance, stability, and availability. Your incidents are
addressed 24x7, with a maximum 4-hour onsite response 365 days a year.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9842EN.pdf
Basic Care - Minimum
recommended support
3-Year HP Support Plus 24-This service provides support for environments where some downtime is
expected. HP provides around-the-clock hardware and software support onsite, including third-party
support. We also provide cost-saving software updates and monitor ongoing operations through the
latest remote tools. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6638EN.pdf
Implement right from the Whichever level of care you select, it includes:
start
HP 3PAR Storage Installation and Startup Service - HP installs and tests your hardware and software
onsite, including configuration. We deliver a custom tailored storage deployment, properly integrated into
your environment. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-2345ENW.pdf
3PAR Remote
Support Tools
Support Recommendations include fully integrated remote supported - core design and fabric of 3PAR
industry benchmark remote support systems. Site-specific data used both proactively and reactively with
real-time monitoring and information extraction tools.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-4141ENW.pdf
Additional services to
meet your needs
HP Storage Data Migration - Proven expertise and tools help you migrate data across your data center or
around the globe. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-4107EN.pdf
HP Enhanced Implementation Service for SANs - HP delivers complete design and implementation
services for Fibre Channel, FCoE, FCIP, SAS, and iSCSI SAN connectivity components.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-8527EN.pdf
HP 3PAR Storage Assessment Service - We offer customized technical and operational guidance for an HP
3PAR Storage infrastructure, along with recommendations to help improve availability levels and ongoing
environment management. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-2346ENW.pdf
HP QuickStart Service for HP 3PAR Storage - Choose the most effective, appropriate methods for
configuring and migrating to a HP 3PAR platform. http://www8.hp.com/us/en/services/servicesdetail.html?compURI=tcm:245-826727&pageTitle=Consulting-Services&contentView=business
For more information
www.hp.com/services/storage
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order
configuration tools.
DA - 14103 North America — Version 19 — January 17, 2014
Page 8
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Service and Support, HP Care Pack, and Warranty Information
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
www.hp.com/go/lookuptool
DA - 14103 North America — Version 19 — January 17, 2014
Page 9
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
HP 3PAR StoreServ 10000 Base Configurations
HP 3PAR StoreServ 10400 16GB Control/32GB Data Cache Rack Configuration Base
HP 3PAR StoreServ 10400 32GB Control/64GB Data Cache Rack Configuration Base
HP 3PAR StoreServ 10400 16GB Control/32GB Data Cache Rackmount Config Base
HP 3PAR StoreServ 10400 32GB Control/64GB Data Cache Rackmount Config Base
HP 3PAR StoreServ 10800 32GB Control/64GB Data Cache Rack Configuration Base
A minimum of one (1) configuration base must be ordered
The base configuration includes two Controller Nodes, one 2-meter Cabinet, service
processor
The Rackmount Configuration Base (QR633C) includes two Controller Nodes,
rackmount kit (for backplane, controllers and service processor), service processor. A
rackmount kit must be ordered separately for each drive chassis (see Drive section
below). These rackmount kits are strictly for new installations into non-HP 3PAR
racks.
There are two 10400 base configurations available - one that includes total cache:
32GB control / 64GB data and another that includes total cache: 64GB control / 128GB
data
The 10800 base configuration includes total cache: 64GB control / 128GB data
The base configuration and node configurations, shown in the section below, have
built-in Gigabit Ethernet ports for management and Remote Copy over IP
The base configurations do not include adapters (beyond embedded ports), drive
chassis, drives, cables or expansion cabinets. These are to be ordered separately
The base configuration and expansion rack PDUs are selected based on the Country
and three phase selection option.
PDUs can be NEMA which stands for the National Electrical Manufacturers Association
or IEC which stands for the International Electrotechnical Commission
NEMA and IEC PDUs differ from each other based on Ampere ratings and the
plug types used. Generally, NEMA based PDUs are used in North America and
IEC based PDUs are used everywhere else. There are exceptions, e.g., NEMA
based PDUs are used in Japan, Taiwan and Philippines.
The NEMA PDU SKUs used are 252663-D74 for single phase and AF511A for
three phase
The IEC PDU SKUs used are 252663-B33 for single phase and AF518A for three
phase
Refer to
http://h18006.www1.hp.com/products/quickspecs/11041_na/11041_na.html
for detailed specifications regarding these PDUs
QW978A
E7W33A
QR633C
E7W48A
QW979A
HP 3PAR StoreServ 10000 Controller Node Configurations
HP 3PAR StoreServ 10400 2.8-GHz 16GB Control/32GB Data Cache Controller Node
HP 3PAR StoreServ 10400 2.8GHz 32GB Control/64GB Data Cache Controller Node
HP 3PAR StoreServ 10800 2.8-GHz 32GB Control/64GB Data Cache Controller Node
HP 3PAR StoreServ 10400 2.8-GHz 16GB Control/32GB Data Cache Upg Controller Node
HP 3PAR StoreServ 10400 2.8GHz 32GB Control/64GB Data Cache Upgr Controller Node
HP 3PAR StoreServ 10800 2.8-GHz 32GB Control/64GB Data Upg Controller Node
One (1) pair of Controller Nodes beyond the base configuration is supported on the
DA - 14103 North America — Version 19 — January 17, 2014
QR586C
E7W34A
QR638C
QR603C
E7W35A
QR640C
Page 10
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
10400
One (1), two (2) and three (3) pairs of Controller Nodes beyond the base configuration
is supported on the 10800
There are two 10400 Controller Nodes available - one that includes total cache: 32GB
control / 64GB data and another that includes total cache: 64GB control / 128GB data.
The 10800 Controller Nodes includes total cache: 64GB control / 128GB data
The node configurations and base configuration, shown in the section above, have
built-in Gigabit Ethernet ports for management and Remote Copy over IP
NOTE: The two different controller nodes cannot be mixed within a 10400 system. Care
must be taken to ensure the appropriate upgrade node is purchased while performing a
node field upgrade for an existing 10400 system. The following table indicates the 10400
base configuration SKUs that correspond to each of the controller nodes available:
10400 Base Configuration SKU
Upgrade Controller Node
QR584A, QR632A, QR633A, QR632C, QR584C,
QR633C, QW978A
E7W33A, E7W48A
QR603C
E7W35A
HP 3PAR StoreServ 10000 Disk Adapters
HP 3PAR 10000 4-port 8Gb Fibre Channel Adapter
HP 3PAR 10000 4-port 8Gb Fibre Channel Upgrade Adapter
Two (2) required per node or four (4) per node pair
Disk Adapters must be ordered in addition to the base configurations and controller
node configurations
QR591A
QR608A
HP 3PAR StoreServ 10000 Host Adapters
HP 3PAR 10000 4-port 8Gb Fibre Channel Adapter
HP 3PAR 10000 4-port 8Gb Fibre Channel Upgrade Adapter
HP P10000 3PAR 2-port 10Gb Converged Network Adapter Card
HP P10000 3PAR 2-port 10Gb Upgrade Converged Network Adapter Card
QR630A and QR610A enable 10Gb/s iSCSI through a CNA
QR591A
QR608A
QR630A
QR610A
HP 3PAR StoreServ 10000 Drive Chassis
HP 3PAR StoreServ 10000 40-disk Drive Chassis
HP 3PAR StoreServ 10000 40-disk Upgrade Drive Chassis
HP 3PAR 10000 40-disk Drive Chassis Rack-mount Kit
When ordering QR633C, one QR598A must be ordered for each QR592C ordered
When adding Drive Chassis to a system with QR633C, one QR598A must be ordered
for each QR609C ordered
QR592C
QR609C
QR598A
HP 3PAR StoreServ 10000 Drives
HP 3PAR SAS HDDs
HP 3PAR StoreServ 10000 4x300GB 6G 15K SFF SAS Drive Magazine
HP 3PAR StoreServ 10000 4x450GB 6G 10K SFF SAS Drive Magazine
DA - 14103 North America — Version 19 — January 17, 2014
QW902A
QW903A
Page 11
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
HP 3PAR StoreServ 10000 4x900GB 6G 10K SFF SAS Drive Magazine
HP 3PAR StoreServ 10000 4x2TB 6G 7.2K SAS Drive Magazine
HP 3PAR StoreServ 10000 4x300GB 6G 15K SFF SAS Drive Upgrade Magazine
HP 3PAR StoreServ 10000 4x450GB 6G 10K SFF SAS Drive Upgrade Magazine
HP 3PAR StoreServ 10000 4x900GB 6G 10K SFF SAS Drive Upgrade Magazine
HP 3PAR StoreServ 10000 4x2TB 6G 7.2K LFF SAS Drive Upgrade Magazine
QW905A
QW907A
QW908A
QW909A
QW911A
QW913A
HP 3PAR SSDs
HP 3PAR StoreServ 10000 4x400GB 6Gb SAS SFF(2.5-inch) Solid State Drive Magazine
HP 3PAR StoreServ 10000 4x480GB 6G SAS MLC Solid State Drive Magazine
HP 3PAR StoreServ 10000 4x920GB 6G SAS MLC Solid State Drive Magazine
HP 3PAR StoreServ 10000 4x400GB 6Gb SAS SFF(2.5-inch) SSD Upgrade Magazine
HP 3PAR StoreServ 10000 4x480GB 6G SAS MLC SSD Upgrade Magazine
HP 3PAR StoreServ 10000 4x920GB 6G SAS MLC SSD Upgrade Magazine
C8R67A
E7W56A
E7W26A
C8R68A
E7W57A
E7W27A
HP 3PAR FC HDDs
HP 3PAR StoreServ 10000 4x300GB 4Gb FC 15K Drive Magazine
HP 3PAR StoreServ 10000 4x600GB 4Gb FC 15K Drive Magazine
HP 3PAR StoreServ 10000 4x300GB 4Gb FC 15K Drive Upgrade Magazine
HP 3PAR StoreServ 10000 4x600GB 4Gb FC 15K Drive Upgrade Magazine
QR621C
QR622C
QR626C
QR627C
HP 3PAR NL HDDs
HP 3PAR StoreServ 10000 4x2TB 4Gb SATA 7.2K Drive Magazine
HP 3PAR StoreServ 10000 4x4TB 6G SAS 7.2K Nearline Drive Magazine
HP 3PAR StoreServ 10000 4x2TB 4Gb SATA 7.2K Drive Upgrade Magazine
HP 3PAR StoreServ 10000 4x4TB 6G SAS 7.2K Nearline Drive Upgrade Magazine
QR623C
E7W12A
QR628C
E7W13A
HP 3PAR Encryption
HDDs
HP 3PAR StoreServ 10000 4x400GB 6Gb SAS SFF(2.5-inch) SSD Encryption Magazine
HP 3PAR StoreServ 10000 4x450GB 6Gb SAS 10K SFF(2.5-inch) Encryption Magazine
HP 3PAR StoreServ 10000 4x900GB 6Gb SAS 10K SFF(2.5-inch) Encryption Magazine
HP 3PAR StoreServ 10000 4x400GB 6Gb SAS SFF(2.5-in) SSD Encryption Upg Magazine
HP 3PAR StoreServ 10000 4x450GB 6Gb SAS 10K SFF(2.5-inch) Encrypt Upg Magazine
HP 3PAR StoreServ 10000 4x900GB 6Gb SAS 10K SFF(2.5-inch) Encrypt Upg Magazine
C8R61A
C8R62A
C8R63A
C8R64A
C8R65A
C8R66A
HP 3PAR FIPS 140-2
Encryption HDDs
HP 3PAR StoreServ 10000 4x450GB 6G SAS 10K FIPS Encryption Drive Magazine
HP 3PAR StoreServ 10000 4x900GB 6G SAS 10K FIPS Encryption Drive Magazine
HP 3PAR StoreServ 10000 4x2TB 6G SAS 7.2K Nearline FIPS Encryption Magazine
HP 3PAR StoreServ 10000 4x4TB 6G SAS 7.2K Nearline FIPS Encryption Magazine
HP 3PAR StoreServ 10000 4x450GB 6G SAS 10K FIPS Encryption Drive Upgr Magazine
HP 3PAR StoreServ 10000 4x900GB 6G SAS 10K FIPS Encryption Drive Upgr Magazine
HP 3PAR StoreServ 10000 4x2TB 6G SAS 7.2K Nearline FIPS Encryption Upgr Magazine
HP 3PAR StoreServ 10000 4x4TB 6G SAS 7.2K Nearline FIPS Encryption Upgr Magazine
C8R62B
C8R63B
E7V81A
E7W14A
C8R65B
C8R66B
E7V82A
E7W15A
HP 3PAR Encryption
HP 3PAR StoreServ 10400 Data at Rest Encryption LTU
BC981A
DA - 14103 North America — Version 19 — January 17, 2014
Page 12
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
License
HP 3PAR StoreServ 10400 Data at Rest Encryption E-LTU
HP 3PAR StoreServ 10800 Data at Rest Encryption LTU
HP 3PAR StoreServ 10800 Data at Rest Encryption E-LTU
Notes:
BC981AAE
BC982A
BC982AAE
All drives within a HP 3PAR StoreServ encrypted array must be self-encrypted
devices. There cannot be a mixture of encrypted drives and non-encrypted drives
within the same array.
Self-encrypted drives are only supported on new HP 3PAR StoreServ 10000 Storage
systems. Encryption is not supported on existing HP 3PAR StoreServ 10000 systems
that are already deployed in customer use.
" FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been certified by the U.S.
National Institute of Standards and Technology (NIST) and Canadian Communications
Security Establishment (CSE) as meeting the Level 2 security requirements for
cryptographic modules as defined in the Federal Information Processing Standards
(FIPS) 140-2 Publication
Strengthen the DAR solution in the future with software upgrade to FIPS validated
local key manager, or optional FIPS validated external key manager.
A data encryption license (LTU) is required to enable encryption on the array. One
encryption license is required for each encrypted array.
Once encryption is enabled on the 3PAR StoreServ Storage, it cannot be disabled.
The local key manager is included in the 3PAR OS. There is not a separately orderable
partnumber for the local key manager.
HP 3PAR Cables
OM3 Cables
HP 3PAR 4m 50/125 (LC-LC) Fiber Cable
HP 3PAR 6m 50/125 (LC-LC) Fiber Cable
HP 3PAR 10m 50/125 (LC-LC) Fiber Cable
HP 3PAR 25m 50/125 (LC-LC) Fiber Cable
HP 3PAR 50m 50/125 (LC-LC) Fiber Cable
HP 3PAR 100m 50/125 (LC-LC) Fiber Cable
QL281B
QR631A
QL266B
QR593A
QL267B
QL268B
OM4 Cables
HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 4M Cable
HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 6M Cable
HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 10M Cable
HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 25M Cable
HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 50M Cable
HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 100M Cable
H6Z34A
H6Z35A
H6Z36A
H6Z38A
H6Z40A
H6Z41A
Direct Attach Copper
Cables*
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
NOTE: HP 3PAR StoreServ 10000 Storage supports Direct Attach Copper Cables only with HP
ProCurve and HP 3COM switches. The Direct Attach Support is also available only for the
iSCSI protocol.
JD097C
J9283B
JG081C
DA - 14103 North America — Version 19 — January 17, 2014
Page 13
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
HP 3PAR StoreServ 10000 optional Cabinets
HP 3PAR StoreServ 10000 2-Meter Expansion Rack
HP 3PAR 10400 Standalone Rackmount kit
* NOTES:
QW982A
QR678A
QR678A can only be ordered as an upgrade part to a system containing QW978A only
The strict use of QR678A is for relocating either QW978A to a non-HP 3PAR rack.
When ordering QR678A, one QR598A must be ordered for each QR592C ordered
When adding Drive Chassis to a system with QR678A, one QR598A must be ordered
for each QR609C ordered
HP 3PAR StoreServ File Controller (For detailed specifications, please refer to File Controller section)
HP 3PAR StoreServ File Controller
C8S69A
SPECIFICATIONS:
Operating System
Processor
Memory
Storage Controller
Internal Storage
Expansion Slots
Network Ports
Form Factor
Microsoft Windows Storage Server 2012, Standard
Intel® Xeon® E5-2609 (2.40GHz/4-core/10MB/80W) Processor
16 GB (4 x 4GB)
Smart Array P420i with 1 GB FBWC Controller with internal SAS port for O/S drives)
2 x 450GB 6G SAS 10K 2.5" ENT hot-plug LFF HDDs (O/S mirror)
3 x PCIe (6 with option PCIe Riser)
4 x 1GbE
2U Rack
Additional Processor & HP DL380p Gen8 Intel® Xeon® E5-2609 (2.40GHz/4-core/10MB/80W) Processor Kit
Memory
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage
Memory Kit
NOTE: HP recommends that you add the same type memory to the product that is shipped
standard with the product.
NOTE: HP memory from previous generation servers are not fully compatible with Smart
Memory features in Gen8 Servers.
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
See the HP ProLiant Gen 8 QuickSpecs for information on memory configurations.
http://h18004.www1.hp.com/products/quickspecs/14212_na/14212_na.html
HP Networking
662252-B21
647893-B21
Gigabit Ethernet adapters
HP NC112T PCI Express Gigabit Server Adapter
HP NC365T 4-port Ethernet Server Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
DA - 14103 North America — Version 19 — January 17, 2014
503746-B21
593722-B21
647594-B21
652497-B21
Page 14
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
HP Ethernet 1Gb 2-port 332T Adapter
10 Gigabit Ethernet Adapters
615732-B21
HP NC523SFP 10Gb 2-port Server Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables
for fiber-optic environments must be purchased separately.
NOTE: Multifunction Server Adapters support the installed Microsoft Windows Server
Scalable Networking Pack, which enables TCP Chimney offload, Receive-side Scaling (RSS),
and Network Direct Memory Access (NetDMA) features.
593717-B21
652503-B21
665249-B21
614203-B21
HP Optical Drives
HP 12.7mm Slim SATA DVD-ROM JackBlack Optical Drive
HP 12.7mm Slim SATA DVD-RW JackBlack Optical Drive
652232-B21
652235-B21
HP I/O Expansion
Options
HP DL380p/560 Gen8 3 Slot PCI-E Riser Kit
NOTE: When populating the second optional riser slot, the second processor must be
installed.
653206-B21
HP Security
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store
artifacts used to authenticate the server platform. These artifacts can include passwords,
certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a
data protection feature available in Windows Server® 2008. BitLocker leverages the
enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM
works with BitLocker to help protect user data and to ensure that a server running Windows
Server 2008 has not been tampered with while the system was offline. For more
information about TPM, including a white paper, go to: www.hp.com/go/TPM.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
Storage Fibre Channel Brocade Fibre Channel HBAs
HBA
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Emulex Fibre Channel HBAs
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP SN1000E 16Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
AP770B
AJ763B
QR559A
QW972A
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Converged Network Adapter
AJ764A
HP CN1100E Dual Port Converged Network Adapter
HP CN1000Q Dual Port Converged Network Adapter
BK835A
BS668A
DA - 14103 North America — Version 19 — January 17, 2014
Page 15
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
NOTE: HBAs are not included standard. HBA selection is left as your choice based on existing
SAN infrastructure.
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000,
Windows Server 2003 and Linux, please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Power Cord
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
AF556A
AF557A
AF558A
AF559A
AF560A
AF561A
AF562A
AF569A
AF565A
AF566A
AF568A
AF564A
AF571A
AF572A
AF570A
AF567A
AF591A
Storage Networking Options
Fibre Channel
Host Bus Adapters
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP 41B 4Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 42B 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
Emulex Fibre Channel HBAs
AP769B
AP770B
AP767B
AP768B
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP FC2142SR 4Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP FC2242SR 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
AJ762B
AJ763B
A8002B
A8003B
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP FC1142SR 4Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP FC1242SR 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
AK344A
AJ764A
AE311A
AE312A
DA - 14103 North America — Version 19 — January 17, 2014
Page 16
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
Fibre Channel Switches HP B-series
8 Gb Fibre Channel Switches
HP 8/8 Base (0) e-port SAN Switch
HP 8/8 (8) Full Fabric Ports Enabled SAN Switch
HP 8/24 Base (16) Full Fabric Ports Enabled SAN Switch
HP 8/80 Base (48) Full Fabric Ports Enabled SAN Switch
HP 8/80 Power Pack+ (48) Full Fabric Ports Enabled SAN Switch
16 Gb Fibre Channel Switches
AM866B
AM867B
AM868B
AM871B
AM872B
HP SN3000B 16Gb 24-port/12-port Active Fibre Channel Switch
HP SN3000B 16Gb 24-port/24-port Active Fibre Channel Switch
QW937A
QW938A
HP SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch
HP SN6000B 16Gb 48-port/48-port Active Fibre Channel Switch
HP SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch
HP SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch
HP StoreFabric SN6500B 16Gb 96/96 Power Pack+ FC Switch
HP StoreFabric SN6500B 16Gb 96/96 FC Switch
HP StoreFabric SN6500B 16Gb 96/48 Power Pack+ FC Switch
HP StoreFabric SN6500B 16Gb 96/48 FC Switch
8 Gb and 16 Gb Director Switches
QK753B
QR480B
QK754B
QR481B
C8R42A
C8R43A
C8R44A
C8R45A
HP SN8000B 8-Slot Power Pack+ SAN Backbone Director Switch
HP SN8000B 4-Slot Power Pack+ SAN Director Switch
HP SN8000B 4-Slot SAN Director Switch
HP DC SAN Backbone Director Switch
HP DC04 SAN Director Switch
HP DC04 Power Pack+ SAN Director Switch
Extension and Embedded Switches
QK710B
QK711B
QK712B
AK857C
AR478B
AR479B
HP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Full Switch
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Power Pack+ Switch
Brocade 8/12c SAN Switch for BladeSystem c-Class
Brocade 8/24c SAN Switch for BladeSystem c-Class
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
Brocade 16Gb/28 SAN Switch for BladeSystem c-Class
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
HP H-series
AP862B
AP863B
AP864B
AJ820B
AJ821B
AJ822B
C8S45A
C8S46A
C8S47A
HP 8/20q Fibre Channel 8-ports Active Switch
NOTE: 8 device ports active, upgradeable to 20 device ports active
AQ233B
HP 8Gb Simple SAN Connection Kit
NOTE: 8 device ports active, upgradeable to 20 device ports active
AK241B
DA - 14103 North America — Version 19 — January 17, 2014
Page 17
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Configuration
HP 8/20q Fibre Channel Switch
NOTE: 16 switch ports active, upgradeable to 20 device ports active
AK242B
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW575B
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW576B
HP SN6000 Stackable 12-port Single Power FC Switch
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device ports active
BK780B
HP C-series
HP SN8000C 13-Slot Supervisor 2A Fabric 3 Director Switch
HP SN8000C 6-Slot Supervisor 2A Director Switch
HP SN8000C 9-Slot Supervisor 2A Director Switch
HP SN6000C 8Gb 16-port Fibre Channel Switch
HP SN6000C 8Gb 32-port Fibre Channel Switch
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 9124 8-ports Active Fabric Switch
Cisco MDS 9124 16-ports Active Fabric Switch
Cisco MDS 9222i Multiservice with 0 SFP Transceiver Modular Fabric Switch
For additional details on SAN infrastructure components and options and storage compatibility information, please visit:
http://hp.com/go/san or select from the part numbers below.
DA - 14103 North America — Version 19 — January 17, 2014
QW927A
AE388C
AE389C
AW585A
AW586A
AW563A
AW564A
AG646A
AG647A
AG851B
Page 18
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications
Physical Specifications
2-Meter Cabinet
Dimensions (width x height x depth)
Service Clearance (front and back)
Weight (not populated)
Maximum Weight (fully populated)
Maximum Weight per Leveling Foot
Maximum Load per Leveling Foot
23.6 x 76.5 x 36 in
Front/Rear: 36 in / 30 in
472.1 lb
1,919.8 lb
480 lb
200 lb/sq in
60 x 194.3 x 91.3 cm
Front/Rear: 91.4 cm / 76.2 cm
214.1 kg
870.8 kg
217.7 kg
14 kg/sq cm
10400 Base Configuration1
10800 Base Configuration1
693.9 lb
786.9 lb
314.7 kg
356.9 kg
2 Controller Nodes (fully populated)
Drive Chassis (fully populated)
Service Processor
133 lb
180 lb
20.8 lb
60.4 kg
81.6 kg
9.4 kg
Component Weights
Supported Host FC Connections
FC Connector Type from Storage System to Host Port
FC Cable Core Diameter
Connector Boot Length
LC to LC
OM3 / OM4
standard
Power and Heat
Single Phase Power Supply Requirements
Input Voltage (VAC)
Frequency (Hz)
Circuit Breaker Maximum
Power Connectors for 2-Meter Cabinet
Power Receptacles
Three Phase Power Supply Requirements
220 (200 - 240)
50 - 60
30 A per PDU6 (de-rated to 24 A)
(4) L6-30P with 1+1 redundant or (4) IEC 60309-32A (332P6S) with 1+1
redundant
(4) L6-30R with 1+1 redundant or (4) IEC 60309 with 1+1 redundant
NEMA (North America, Taiwan, Philippines & Japan)
Input Voltage (VAC)
Frequency (Hz)
Circuit Breaker Maximum
Power Connectors for 2-Meter Cabinet
Power Receptacles
200 - 240 p-p
50 - 60
48 A per PDU (de-rated to 27.71 A per phase)
(2) IEC 309, 3-pole, 4-wire, BLUE, gnd clocked to 3:00 with 1+1 redundant
(2) Hubbell HBL460C9W or equivalent
IEC (International)
Input Voltage (VAC)
200 - 240 p-n; 380 - 415p-p
DA - 14103 North America — Version 19 — January 17, 2014
Page 19
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications
Frequency (Hz)
Circuit Breaker Maximum
Power Connectors for 2-Meter Cabinet
Power Receptacles
50 - 60
32 A per phase per PDU
(2) IEC 309, 4-pole, 5-wire, RED, gnd clocked to 6:00 with 1+1 redundant
(2) Hubbell C532C6S or equivalent
Maximum Potential Power Draw per 2-Meter Cabinet
Watts per Cabinet
9,984 watts / 34,075 BTU/h
Actual Power Draw / Heat Dissipation
Service Processor
Drive Chassis (without Drive Magazines)
4 x 400-GB SSD / Encryption Drive Magazine
4 x 480-GB SSD Drive Magazine
4 x 920-GB SSD Drive Magazine
4 x 300-GB SFF SAS Drive Magazine
4 x 450-GB SFF SAS / Encryption Drive Magazine
4 x 900-GB SFF SAS / Encryption Drive Magazine
4 x 2-TB LFF SAS / Encryption Drive Magazine
4 x 4-TB LFF SAS / Encryption Drive Magazine
4 x 300-GB FC Drive Magazine
4 x 600-GB FC Drive Magazine
4 x 2-TB NL Drive Magazine
Controller Node Pair
Example Full Cabinet Configuration (4-Node 10400; 4 Drive
Chassis, 160 600-GB drives,1 service processor)
350 watts / 1,193 BTU/h
200 watts / 683 BTU/h
3
Transactional
Idle
(watts / BTU/h)
(watts / BTU/h)
14.8 / 50.5
8.8 / 30
39 / 132
27.2 / 92.8
29.2 / 99.6
47 / 160
35.2 / 120
75 / 256
76 / 258
62 / 211
1,315 / 4,487
6,787 / 23,184
34 / 117
22 /75.1
22.4 / 76.4
35 / 119
48.4 / 165.1
57 / 195
65 / 222
38 / 131
990 / 3,378
5,697 / 20,400
DA - 14103 North America — Version 19 — January 17, 2014
Page 20
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications
Environmental Specifications
Temperature (°F/°C), 0 - 3,000 ft / 0 - 914.4 m
Temperature (°F/°C), 3,000 - 10,000 ft / 914.4 m - 3,048 m
Altitude (ft/m) max.
Humidity (%), Non-condensing
Raised Floor
Emissions / RFI / EMI
Safety
Energy Consumption Efficiency5 (Japan Green Law)
50 - 104°F / 10 - 40°C
50 - 95°F / 10 - 35°C
10,000 ft / 3,048 m
20 - 80%
Recommended
FCC Class A, EN55022 Class A,EN55024: 1998, VCCI Class A
CE Mark, C-TUVus Mark, TUV GS Mark, CB Scheme with all country
deviations
0.011
1 Includes 2-meter rack and two controller nodes (fully populated)
2 Maximum, Up to 10 drive magazines (40 drives) of any combination of SAS, FC or NL and up to 8 SSD magazines (32 SSD drives) per
Drive Chassis
3 Under maximum load
4 Includes power and heat dissipation specifications for the Service Processor as follows: 317 Watts, 1082 BTU/hr,
100 - 240 VAC Input Voltage, 50 - 60 Hz Frequency, and (1) IEC-320 Power Receptacle
5 Japan Green Law statement of compliance: The energy consumption efficiency value has been calculated per requirements for
Category-N Magnetic Disk Drive Units by dividing the power consumption, measured according to the definition in the Law Concerning
the Rational Use of Energy, by the storage capacity defined in the Energy Conservation Law. The efficiency value is based on a hostmaximized 10800 configuration using 600GB drives.
6 Power Distribution Unit
NOTE: Specifications are subject to change without notice.
DA - 14103 North America — Version 19 — January 17, 2014
Page 21
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Overview - HP 3PAR StoreServ File Controller
HP 3PAR StoreServ File Controller is a new converged storage capability on the HP 3PAR StoreServ Storage platform. It adds support
for file services to the 3PAR StoreServ. The HP 3PAR StoreServ File Controller is designed to deliver efficient, secure, and highly
available file capaility that supports hundreds to thousands of concurrent users.
What's New
3PAR File Services capability for HP 3PAR StoreServ Storage.
Wizard-based easy clustering for ease of deployment.
HP 3Par StoreServ File Controller
The HP 3PAR StoreServ File Controller sets the standard for performance and expandability for file services for the 3PAR StoreServ
platform. It leverages the 3PAR StoreServ Storage data services and extends the benefits to file workloads. Please refer to the
respective sections for details on the data services.
Models
HP 3PAR StoreServ File Controller
C8S69A
Front View:
1.
Quick removal access panel
2.
Second Intel Processor
3.
First Intel Processor
4.
24 DIMM slots: DDR3 Registered (RDIMM), Load Reduced
(LRDIMM), or Unbuffered (UDIMM) memory
5.
Air Baffle
Rear View:
1.
PCIe 3.0 Slots 1, 2, 3-PCIe 2.0 top to bottom
2.
N/A
3.
Power supply 1
4.
Power supply 1 Power LED
6.
Hot-plug fans, full N+1 redundancy
6.
7.
8.
9.
Health LED
Power On /Standby button and system power LED button
USB connector
7.
8.
9.
5.
Power supply 1 Power connection (with Intelligent PDU
communication)
Power supply 2 Power connection (with Intelligent PDU
communication)
Power supply 2 Power LED
Power supply 2
Unit ID LED/Button
DA - 14103 North America — Version 19 — January 17, 2014
Page 22
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Overview - HP 3PAR StoreServ File Controller
10.
11.
12.
13.
14.
Unit ID LED
Systems Insight Display
Asset Tag
USB connector
Drive Bays
10.
11.
12.
13.
14.
15.
16.
Optional Slim Optical Bay (SATA DVD-RW /ROM Optical Drive)
Video connector
USB connectors (4)
Video connector
iLO connector
Serial connector
FlexibleLOM ports (Shown: 4 ports 1Gb each /Optional: 2
ports 10Gb each)
DA - 14103 North America — Version 19 — January 17, 2014
Page 23
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Features and Benefits - HP 3PAR StoreServ File Controller
Efficient: Save money and The HP 3PAR StoreServ File Controller supports thousands users concurrently accessing their files.
time
Non intrusive variable chunk de-duplication delivers an average 50-60% space savings, and included
evaluation tool facilitates capacity planning.
Consolidate multiple diverse file protocols (NFS: v2, v3, v4.1 | SMB: 2.0, 2.1, 3.0 | WebDAV | FTP/FTPS |
HTTP/HTTPS) as well as IT services (e.g. print, DNS, DHCP) in a single platform.
Hosted BranchCache reduces your branch office WAN usage by automatically caching frequently accessed
headquarter datacenter files.
Straightforward and consistent management experience that provides storage management for both file
and block based workloads.
Secure: Protect your data Built in file system encryption and optional BitLocker Drive Encryption secures data at rest while SMB
and organization always Encryption protects data in flight.
File Classification Infrastructure facilitates sophisticated access controls and support for Active Directory
Rights Management Services protects files no matter where they go.
Online snapshots enable users to directly recover files and prior file versions.
Broad support for onboard endpoint protection (antivirus) software eliminates the need to purchase
additional external infrastructure.
Broad support for agent-based data protection enhances the ability to meet backup and recovery SLAs.
Highly Available: Prevent Turnkey clustered controller configurations with transparent failover for SMB and NFS provide continuous
availability.
User and Organization
disruption
Cluster aware updates enable online maintenance.
File system online self healing, online verification, and precise and rapid repair massively reduce downtime
from file corruption.
HP Active Health System, mirrored OS disks, RAID for data disks, redundant fans and power, and advanced
memory protection maximize uptime.
Three year onsite parts and labor warranty for the system, and one year of software telephone support.
DA - 14103 North America — Version 19 — January 17, 2014
Page 24
QuickSpecs
HP 3PAR StoreServ 10000 Storage
SAN / Array Compatibility - HP 3PAR StoreServ File Controller
Operating System
Microsoft Windows Storage Server 2012, Standard Edition
Windows Storage Server 2012 (WSS2012) includes a robust range of file serving and storage
capabilities. It addresses heterogeneous file workload environments and enables more efficient
storage utilization. It allows for a flexible mix of configurations and includes advanced data
management tools. WSS2012 leverages your Windows Server management skill sets and tools
including Active Directory, PowerShell and System Center.
Extensive protocol support: SMB ( 2.0, 2.1, 3.0), NFS (v2, v3, v4.1), WebDAV, HTTP/HTTPS,
FTP/FTPS, ISCSI
SMB 3.0: Leverage high performance continually available file shares to deliver feature-rich storage
for continuously available file services, business-critical applications and virtual servers using
advanced new functionality.
New VHDX Standard: Deploy larger capacity virtual storage that can grow to 16 terabytes, is more
resilient against corruption, and provides more efficient usage of new 4 KB sector hard disks with
the new VHDX virtual storage standard.
Live Storage Migration: Maintain maximized service-level availability even while moving virtual
machine storage between host servers independent of the actual virtual machine.
SMB Multi-channel: Enable aggregation of network bandwidth and network fault tolerance when
multiple paths are available between SMB clients and file servers.
NFS v4.1: For Windows Storage Server 2012, Server for NFS has been updated to support
continuous availability. These improvements make it possible to reliably store and run VMware ESX
on a virtual machine that is running Windows Server 2012 by using the NFS protocol to share files.
Additional improvements in failover clustering take advantage of better resilience to hardware and
software outages that may afflict individual cluster nodes. At the same time, failover clustering
isolates VMware ESX hypervisor hosts from intermittent glitches during failovers.
Data Deduplication: Data deduplication enables Windows Storage Server 2012 to store more data in
less physical space and achieve storage efficiency that is significantly higher than was possible in
previous releases of Windows Storage Server that used Single Instance Storage (SIS) or NTFS file
system compression. Data deduplication uses variable size chunking and compression, which
deliver optimization ratios of 2:1 for general file servers and up to 20:1 for virtualization data.
Evaluate your savings with the Deduplication Evaluation Tool.
Volume Shadow Copy Service: Creates point-in-time copies (snapshots) of files and folders at
predetermined time intervals that can then be accessed from client computers.
VSS for Remote SMB File Shares: Leverage proven Volume Shadow Copy Service (VSS) to offload
snapshot and backup operations to remote storage from VSS hardware providers within Hyper-V
virtual machines.
Hosted Branch Cache: Using client/server architecture, Windows 7 and above client computers can
cache content on the local network via the Hosted Cache running on the 3PAR StoreServ File
Controller. Other clients who need the same content retrieve it directly from the Hosted Cache.
DFS Namespaces: Enables you to group shared folders that are located on different servers into one
or more logically structured namespaces. Each namespace appears to users as a single shared
folder with a series of subfolders. However, the underlying structure of the namespace can consist
of numerous file shares that are located on different servers and in multiple sites.
Distributed File System Replication (DFS-R): Enables you to efficiently replicate folders (including
those referred to by a DFS namespace path) across multiple servers and sites. DFS Replication uses
a compression algorithm known as remote differential compression (RDC). RDC detects changes to
the data in a file, and it enables DFS Replication to replicate only the changed file blocks instead of
the entire file.
File Server Resource Manager (FSRM): File Server Resource Manager is a set of features that allow
you to manage and classify data that is stored on file servers. File Server Resource Manager
DA - 14103 North America — Version 19 — January 17, 2014
Page 25
QuickSpecs
HP 3PAR StoreServ 10000 Storage
SAN / Array Compatibility - HP 3PAR StoreServ File Controller
includes the following features:
Storage reports: Storage reports are used to help you identify trends in disk usage and how
your data is classified. You can also monitor a selected group of users for attempts to save
unauthorized files.
File Classification Infrastructure: File Classification Infrastructure provides insight into your
data by automating classification processes so that you can manage your data more
effectively. You can classify files and apply policies based on this classification. Example
policies include dynamic access control for restricting access to files, file encryption, and file
expiration. Files can be classified automatically by using file classification rules or manually
by modifying the properties of a selected file or folder.
File Management Tasks: File Management Tasks enables you to apply a conditional policy or
action to files based on their classification. The conditions of a file management task include
the file location, the classification properties, the date the file was created, the last modified
date of the file, or the last time the file was accessed. The actions that a file management
task can take include the ability to expire files, encrypt files, or run a custom command.
Quota management: Quotas allow you to limit the space that is allowed for a volume or
folder, and they can be automatically applied to new folders that are created on a volume.
You can also define quota templates that can be applied to new volumes or folders.
File screening management: File screens help you control the types of files that user can
store on a file server. You can limit the extension that can be stored on your shared files. For
example, you can create a file screen that does not allow files with an MP3 extension to be
stored in personal shared folders on a file server.
Initial Configuration Tasks Wizard: Simplifies and accelerates new device deployment by presenting
basic system settings on your first boot.
Server Manager
Print Management Console: Manage multiple printers (license for unlimited printer support) from a
single console, whether locally or over the WAN
Unlimited Client Access Licenses (CALs) included
Processor / Cache Memory Intel® Xeon® E5-2609 (2.40GHz/4-core/10MB/80W) Processor
Memory
Type
Standard
DIMM Sockets
DDR3 Registered (RDIMM) standard
16GB (4 x 4GB)
24
Network Controller
NIC Ports
Controller
4
HP Ethernet 1Gb 4-port 331FLR Adapter
DA - 14103 North America — Version 19 — January 17, 2014
Page 26
QuickSpecs
HP 3PAR StoreServ 10000 Storage
SAN / Array Compatibility - HP 3PAR StoreServ File Controller
HP 3PAR StoreServ File Controller
Expansion Slots
Primary Riser
(Standard)
Expansion
Slots #
Technology
Bus
Width**
Connector
Width
1
PCIe 3.0
X16
X16
Expansion
Slots #
Technology
Bus
Width**
Connector
Width
4
PCIe 3.0
X16
X16
Bus Number* Form Factor
Notes
Full Length,
Proc 1
Full Height
Slot
2
PCIe 3.0
X8
X8
10
Half Length,
Proc 1
Full Height
Slot
3
PCIe 2.0
X4
X8
13
Half Length,
Chipset
Full Height
Slot
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment
number
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support up to 150w PCIe cards, but an additional Power Cord Option is required (PN
669777-B21). See Option Section below for offering.
PCIe Riser
(Optional 3-slot)
7
Bus Number* Form Factor
Notes
Full Length,
Proc 2
Full Height
Slot
5
PCIe 3.0
X8
X8
20
Half Length,
Proc 2
Full Height
Slot
6
PCIe 3.0
X4
X8
23
Half Length,
Proc 2
Full Height
Slot
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment
number
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support up to 150w PCIe cards, but an additional Power Cord Option is required (669777B21). See Option Section below for offering
Storage Controller
16
NOTE: HP 3PAR StoreServ File Controller includes a storage controller designed for internal drives housing
the O/S mirror only; an HBA is required to address connectivity to the 3PAR StoreServ Storage array.
Controller(s)
HP Smart Array P420i/1GB with FBWC
RAID
Needed for internal drive mirror only
DA - 14103 North America — Version 19 — January 17, 2014
Page 27
QuickSpecs
HP 3PAR StoreServ 10000 Storage
SAN / Array Compatibility - HP 3PAR StoreServ File Controller
Storage
Hard Drives
Internal
Eight 2.5" (Small Form Factor) hot-plug bays
External
2 x 450GB 6G SAS 15K SFF HDDs for O/S mirror
3PAR StoreServ Storage using Fibre Channel
Power Supply
2 x 460 Watts Platinum
Power Cords
NOTE: The HP 3PAR StoreServ File Controller is primarily connected to PDU's in data center racks so they
now ship standard with only a PDU 6-foot C-14 to C13 power cord (142258-001). If a user wishes to power
a system using a110V receptacle see Power Cord option section for more options.
System Fans
(4) (N+1 redundancy standard)
Form Factor
2U Rack form factor
Host Bus Adapter (HBA)
Support
HP 3PAR StoreServ File Controller is designed to be connected to a HP 3PAR SToreServ Storage array by
adding a recommended Fibre Channel HBA.
DA - 14103 North America — Version 19 — January 17, 2014
Page 28
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Warranty
3 Year, On-site Warranty Service. 7x24 4-hour remote response with next business day on-site response
HP warrants only that the Software media will be free of physical defects for a period of ninety (90) days from delivery.
For more information about HP's Global Limited Warranty and Technical Support, visit:
http://www.hp.com/products/storageworks/warranty
Services Included with the One year of HP Software Support, standard 9x5 business hours (software advisory and remedial
Product
software telephone support, new version license rights, and media and documentation distribution
service).
Service and Support
Services to accelerate time to results
HP Storage Services bring you a rich portfolio of consulting and support services designed to add
value to our core storage products and solutions. We have the know-how and experience to put
storage technology to work for you. We work closely with you as your strategic partner, leveraging
our full services portfolio to make sure that everything works to optimize your enterprise.
Choose from services aligned to our storage product offerings and lifecycle. From mission-critical
onsite services to innovative web-based remote support, you choose the precise level of attention
and support your business demands.
Discover, plan, and design Choose from a rich portfolio of services to make the most of 3PAR StoreServ 10000 Storage (Titan
Plus / Saturn - PL 4F), so you can efficiently and affordably consolidate, manage, and extract value
from unstructured data.
Start here to understand your data protection options. Next, develop a methodical plan and design
the optimal 3PAR StoreServ 10000 Storage (Titan Plus / Saturn - PL 4F)that addresses your unique
technology requirements.
HP Storage Efficiency Analysis - HP Storage Efficiency Analysis (SEA) combine tool-based fact
gathering and HP's expertise for a quick path to identify immediate issues and their resolution, and
helps customer realize the benefits of HP Storage Technology
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-6727ENW.pdf
HP Storage Impact Analysis - This service provides assessment service to analyze your current
storage and evaluate the impact of change to the infrastructure. It is ideal for customers looking to
achieving top utilization of your storage technology and assessing the likely impact of data growth
and future projects that require storage. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA41174ENW.pdf
HP Storage Modernization service Storage Modernization helps customers seamlessly position
themselves to integrate the latest technological advancements in storage effectively. It helps clients
modernize, reduce costs, and improve quality of service through the execution of process and
technology changes to achieve demand management.
DA - 14103 North America — Version 19 — January 17, 2014
Page 29
QuickSpecs
HP 3PAR StoreServ 10000 Storage
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-4620ENW.pdf
Deploy and integrate
Implement 3PAR Application Software Suite for vSphere (Vishnu - PL 43)correctly-right from the
start-so you can count on reduced risk and accelerated deployment, while implementing a bestpractice configuration from day one.
HP 3PAR StoreServ Storage Installation and Startup Service - Onsite installation and testing installs
and tests HP 3PAR StoreServ Storage, including configuration and deployment, properly integrated
into your environment
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2568ENW.pdf
HP 3PAR Software Installation and Startup Service - Support for deployment of licensed HP 3PAR
software products into operation
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2569ENN.pdf
HP Storage Data Migration Service - End-to-end data migration service providing seamless discovery,
assessment, planning, and design, completely customizable to your organization's storage area
network (SAN) or network attached storage (NAS) environment and using innovative software to help
you migrate to HP storage quickly and efficiently
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-0774ENW.pdf
HP EVA to HP 3PAR StoreServ Acceleration Service - An alternative to do-it-yourself data migration
options with guidance from our storage migration specialists, designed to help you execute an HP EVA
to HP 3PAR StoreServ Storage data migration at your own pace and with lowered cost
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HP Data Replication Solution Service - Configuration of real-time data mirroring or snapshot
capabilities of 3PAR Remote Copy and 3PAR Virtual Copy to safeguard your critical business
information
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-9431ENW.pdf
HP Enhanced Implementation Service for SANs - Complete design and implementation service for
Fibre Channel, FCoE, FCIP, SAS, and iSCSI SAN connectivity components
HP 3PAR Adaptive Optimization Policy Implementation Service - Analysis, recommendations, and
implementation of HP 3PAR Adaptive Optimization policies to enable storage tiering using data
collected from your HP 3PAR storage over time
HP Storage Virtual Volume Design and Implementation Service - Activities your organization needs to
design and implement a new LUN, virtual volume, or virtual disk (Vdisk) configuration
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-0774ENW.pdf
HP Proactive Select - A flexible way to purchase services to fit your environment with an extensive
menu of HP Proactive Select event and technical services, such as onsite firmware upgrades, health
checks, assessments, and education
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HP Thin Volume Conversion Service - Evaluation and execution of conversion from standard to thin
DA - 14103 North America — Version 19 — January 17, 2014
Page 30
QuickSpecs
HP 3PAR StoreServ 10000 Storage
provisioned volumes for HP 3PAR StoreServ Storage for when you are looking to optimize the
utilization of HP 3PAR StoreServ Storage by improving capacity utilization and performance
http://h20195.www2.hp.com/V2/GetPDF.aspx/c01658303.pdf
HP 3PAR StoreServ Health Check - Assessment of the overall health and supportability of your HP
3PAR StoreServ Storage
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA4-3404ENW.pdf
HP Performance Analysis Service - Data collection, detailed input/output (I/O) analysis, and
enhancement recommendations to improve HP 3PAR StoreServ Storage disk array performance,
stability, and availability by identifying potential problems and understanding the possible solutions
that will help avoid them
HP 3PAR Rebalance Service - Planning and coordinating activities led by HP Storage Services
professionals to deliver a successful disk array rebalance, including creation and implementation of a
rebalance service plan, verification tests to confirm product functionality, and an orientation session
to review changes made to the system
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA4-0280ENW.pdf
HP 3PAR Storage Assessment Service - Assessment check based on a point-in-time
snapshot of system configuration, capacity, supportability, and interoperability for a single HP 3PAR
Storage, ideal when you are experiencing rapid growth or need to establish a baseline understanding
of your current HP 3PAR StoreServ environment
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA4-0280ENW.pdf
Operate and support
Choose the right support to maximize uptime, free up your resources, and achieve improved value-as
you get the most out of the existing IT assets while accelerating time-to-revenue.
HP Critical Service - Proactive activities and 24x7 monitoring of your environment-ideal for when
uninterrupted uptime is essential
HP Proactive Care 24x7 - Hardware and software support services designed specifically for your
technology with rapid access to Advanced Solution Center Specialists plus firmware and software
management and best practice advice http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA38855ENW.pdf
HP Proactive Care Personalized Support - An option-if you have HP Proactive Care- to bring increased
personalization of the Proactive Care support experience through the assignment of an Account
Service Manager (ASM) who provides IT best practice advice to help address IT issues and projects.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-3446ENW.pdf
HP Education Services - Comprehensive training for new, as well as experienced, storage
administrators designed to expand your skills and keep you up to speed with the latest storage and
virtualization technology from HP Storage. http://education.hp.com/curr-storsan.htm
Optimized Care- delivers Choose from three levels of operate and support care
best performance and
DA - 14103 North America — Version 19 — January 17, 2014
Page 31
QuickSpecs
HP 3PAR StoreServ 10000 Storage
stability through
deployment and
proactive management
practices
HP Critical Service
Standard Care-maintains
high level of uptime,
along with expert help to
cut the cost and
complexity of
implementation and
support
HP Proactive Care 24x7-Plus, 20 credits per year per array
Basic Care-Minimum
recommended support
HP Proactive Care 24x7, plus 10 HP Proactive Select credits per year, per array
Additional options - 10 HP Proactive Select credits per year, per array
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select
credits per year, per array
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select
credits per year, per array
Remote
Support Automation
HP Automation provides 24x7 coverage, proactive problem prevention, accurate problem diagnosis
and faster problem resolution, as well as interactive support portals and tools. This is an integral,
and cost-free, part of your HP support relationship and we are continually investing in additional
cutting-edge capabilities to make it better.
For more information
www.hp.com/services/storage
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order
configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
www.hp.com/go/lookuptool
DA - 14103 North America — Version 19 — January 17, 2014
Page 32
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Storage - HP 3PAR StoreServ File Controller
1-8
Eight 3.5" (LFF) hot plug hard drive
bays (File Controller ships with only
two SAS drives for OS)
DA - 14103 North America — Version 19 — January 17, 2014
Page 33
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications - HP 3PAR StoreServ File Controller
3PAR StoreServ File Controller
Dimensions (H x W x D)
(with bezel)
Weight (approximate)
Input Requirements
(per power supply)
SFF Drives: 3.44 x 17.54 x 27.50 in (8.73 x 44.55 x 69.85 cm)
Maximum
61.00 lb (27.66 kg)
(all hard drives, power
supply, and processor
installed)
Minimum
41.0 lb (18.59 kg)
(one SFF hard drive, power
supply, and processor
installed, ODD not
installed)
Rated Line Voltage
100 to 120 VAC
200 to 240 VAC
Rated Input Current
For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)
8.9 A (at 100 VAC),
4.3 A (at 200 VAC)
5.5 A (at 100 VAC),
2.6 A (at 200 VAC)
For 750 W Power Supply:
For 460 W Power Supply:
Rated Input Frequency
Rated Input Power
50 to 60 Hz
For 1200 W Power Supply:
For 750 W Power Supply:
For 460 W Power Supply:
BTU Rating
Maximum
For 1200 W Power Supply:
For 750 W Power Supply:
For 460 W Power Supply:
Power Supply Output
(per power supply)
Rated Steady-State Power For 1200 W Power Supply:
For 750 W Power Supply:
For 460 W Power Supply:
Maximum Peak Power
For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)
857 W (at 100 VAC),
824 W (at 200 VAC)
526 W (at 100 VAC),
505 W (at 200 VAC)
3530 BTU/hr (at 100 VAC),
4600 BTU/hr (at 200 VAC)
2925 BTU/hr (at 100 VAC),
2812 BTU/hr (at 200 VAC)
1794 BTU/hr (at 100 VAC),
1725 BTU/hr (at 200 VAC)
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
800 W (at 100 VAC),
DA - 14103 North America — Version 19 — January 17, 2014
Page 34
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications - HP 3PAR StoreServ File Controller
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per
every 304.8 m (1.8°F per every 1000 ft) above sea level to a maximum of 3048
m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Operating
10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb
temperature, non-condensing.
Non-operating
5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing.
Operating
3048 m (10,000 ft). This value may be limited by the type and number of
options installed. Maximum allowable altitude change rate is 457 m/min
(1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min
(1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position AWeighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with
ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping configurations. Additional options
may result in increased sound levels.
NOTE: The Listed sound levels apply to standard shipping configurations. Additional options may result in
increased sound levels.
Idle
LWAd
LpAm
Operating
Emissions Classification
(EMC)
4.1 B
25 dBA
LWAd
LpAm
FCC Rating
Normative Standards
4.3 B
27 dBA
Class A
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438;
GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation,
or assessment. This product or family of products is eligible to bear the appropriate compliance logos and
statements.
NOTE: The Listed sound levels apply to standard shipping configurations. Additional options may result in
increased sound levels.
DA - 14103 North America — Version 19 — January 17, 2014
Page 35
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications - HP 3PAR StoreServ File Controller
HP iLO 4 On System
Management
Architecture
PCI Express based health and remote management ASIC
Processor
Embedded ARM processor core operating at 400MHz
Upgradeability
Firmware upgradeable via Flash ROM
Video Support
1920 x 1200 (16 bpp) DVR max resolution
Interfaces
HP iLO Dedicated* Network connection (10/100/1000 Mb/s) on rack, tower and
SL systems
*Optional Module on some servers
HP iLO Shared Network connection (10/100/1000 Mb/s) on rack, tower and SL
systems
HP iLO network connection to blades (100 Mb/s) to Onboard Administrator
(with 10/100/1000 Mb/s uplink) on blade systems
Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
For information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your
server including how to purchase from HP, please visit our OS Support Site at:
http://www.hp.com/go/ossupport
For information on Client System Support, please visit the HP iLO Feature
Comparison Site at: www.hp.com/go/compareilo
Microsoft Internet Explorer 9
NOTE: For customers using Protected Mode, please use the Java based version
of Integrated Remote Console.
Microsoft Internet Explorer 8
NOTE: For customers using Protected Mode, please use the Java based version
of Integrated Remote Console.
Microsoft Internet Explorer 7
Firefox Extended Support Release (ESR) 10 (on supported Windows and Linux
systems
Firefox 3.6 (on supported Windows and Linux systems)
Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Active Directory v1.0 (Windows 2003)
Operating System
Support
Client System Support
Client Browser Support
Command Line Support
Security
Directory Support
Services
Driver Support
HP ProLiant iLO 4 Management Controller Driver Package
Management protocols
supported
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
DA - 14103 North America — Version 19 — January 17, 2014
Page 36
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications - HP 3PAR StoreServ File Controller
HP Smart Array P420i
Controller
Dimensions
Embedded
Disk Drive and Enclosure 6Gb/s SAS (Serial Attached SCSI)
Interface - Transfer Rate 3Gb/s SATA (Serial ATA)
SAS Connectors
2 internal 4X connectors
Cache Memory Speed
Server Interface
512MB FBWC - DDR3-1333MHz with 40-bit wide bus, 1GB or 2GB FBWC DDR31333MHz with 72-bit wide bus
x8 PCIe 3.0 provides 8GB/s maximum bandwidth
SAS Speed
(8) 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Cache Memory
Zero Memory RAID has no cache memory
40-bit 256MB ECC protected cache (battery upgrade available)
72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC
Logical Drives Supported Zero Memory, Up to 2 logical volumes (8SFF or 4LFF physical drives)
Up to 64 logical drives with cache
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
HP Ethernet 1Gb 4-port
331FLR Adapter
HP Flexible Network
Technology
HP Flexible Network Technology consists of replaceable network solutions to
meet the customers require now or in the future.
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
Data Transfer Method
EEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ad 1000Base-TX
IEEE 802.1p 100Base-TX
IEEE 802.1q 100Base-TX
PCI Express, four lanes (x4)
Chipset
BCM5719
Network Transfer Rate
10 Mb/s
20 Mb/s
100 Mb/s
200 Mb/s
2000 Mb/s
Connector
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
100Base-TX (Half-Duplex)
100Base-TX (Full-Duplex)
1000Base-TX (Half and
Full-Duplex)
Two RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
Category 5 or higher UTP;
up to 328 ft (100 m)
10/100/1000Base-TX
DA - 14103 North America — Version 19 — January 17, 2014
Page 37
QuickSpecs
HP 3PAR StoreServ 10000 Storage
Technical Specifications - HP 3PAR StoreServ File Controller
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For drives, 1 TB = 1 trillion bytes. Actual formatted capacity is less.
DA - 14103 North America — Version 19 — January 17, 2014
Page 38
Open as PDF
Similar pages