PowerChain Management solutions
12–60 kW
Eaton BladeUPS
™
High-density computing environments demand
more power
Reduce energy costs with high efficiency
Today, the management of a data center or network operations
center places you under the intense pressure to reduce costs while
dealing with inescapable operational realities:
In addition to dramatic cost savings, high system efficiency
extends battery runtimes and produces cooler operating conditions
within the UPS, extending the life of components and increasing
overall reliability and performance.
Increasing power costs. Utility rates have a common recurrence,
they always go up. Energy costs are emerging as the second
highest operating cost (behind labor) in 70% of data centers
worldwide. (Gartner, 2009). To this point, many organizations
are researching and developing plans to implement efficient and
affordable power solutions in their facilities.
Eaton BladeUPS—12 kW
• Protects mission-critical applications with innovative
backup power technology designed specifically for
high-density computing environments
• Supports the constant moves, adds and changes of
today’s dynamic data centers with a modular, scalable,
and flexible
backup power architecture
Introducing the BladeUPS uninterruptible
power system
• Accommodates growth by enabling building-block
upgrades from 12 kW to 60 kW in a single rack enclosure
The standard internal batteries provide needed ride-through power
until an auxiliary power source takes over or systems are gracefully
shut down. Extend runtime up to 34 minutes at full load (or 76
minutes at half load) with extended battery modules (EBMs).
Best-in-class UPS
Traditional UPS
80
70
20%
40%
60%
80%
100%
Even at very small loads, where you would expect efficiency to be
lower, the BladeUPS is still more efficient than other UPS products
at full load.
Features
If you manage, engineer, or plan the present and future of a data
center or network operations center, you are already aware of
these critical issues and their impact on operations. Your challenge
is to make decisions that provide efficient power protection and
distribution for growing loads, while managing the heat. Eaton is
ready to help you with these challenges.
Designed specifically for high-density computing environments,
the Eaton® BladeUPS® delivers 12 kW of efficient, reliable power
in only 6U of standard rack space, including batteries. Expand
capacity by combining 12 kW modules in a building block fashion
to deliver 60 kW of redundant backup power from a single rack
enclosure. This powerful configuration delivers higher power
density than competitive, modular solutions, while dissipating
only one-third of the heat.
Even small increases in efficiency can quickly translate into
thousands of dollars. The example below compares annual and
five-year energy costs for the BladeUPS and a competitor’s
solution. It’s easy to see that the BladeUPS pays for itself
through energy and cooling savings alone.
BladeUPS
90
The BladeUPS delivers an outstanding, industry-leading 98
percent efficiency in normal operation. Even at <50% load,
where efficiency is typically much lower, this UPS performs
more efficiently than competitors’ modular products at full load.
Expanding power demands. The blade servers that are satisfying
business demands can also raise the demands for power
consumption in the same footprint. Rack power requirements that
were once at 60 watts per U may now have to be delivered at
levels up to 600 watts per U with redundant power supplies.
Excessive heat. Blade servers generate a lot of heat that
translates into high demand for additional energy. A fully loaded
rack of blade servers can use close to 30 kW of power. This equals
over 100,000 BTU/hr in heat generation that requires cooling–
wasted heat, which is not utilized in any way. Since cooling adds
huge costs to data center operations, IT organizations are forced
to increase their power efficiency to counteract the inefficient heat
and cooling problems.
100
As utility rates continue to climb, energy efficiency becomes
a sticking point with data center managers.
• Conserves valuable rack space with 12 kW of power in
only 6U of rack height, including batteries
• Reduces energy costs and cooling needs through
best-in-class efficiency performance
• Delivers highest levels of reliability at the rack with
patented Powerware® Hot Sync® paralleling technology
and intelligent bypass design, field proven in thousands
of large data centers globally
Example
BladeUPS
Traditional UPS
UPS efficiency rating
>98%
91.5%
Rack power consumption
60 kW
60 kW
Cost per kWh
$0.10
$0.10
Cost to operate per hour
$6.18
$6.56
Monthly power savings
$273 saved each month with the BladeUPS
Heat dissipation (BTUs per hour)
6,300
*Monthly cooling savings
$246 saved each month with the BladeUPS
Annual savings with the BladeUPS
$6,238 saved each year
Five-year savings with the BladeUPS
$31,190 saved in five years
19,000
* Cooling savings based on industry calculation of cooling costs per kW of power costs.
• Simplifies installation and service with true plug-andpower connections and hot-swappable batteries and
electronics modules
• Increases battery life through ABM® technology, resulting
in more uptime and fewer battery replacements
Reduce cooling costs with lower heat dissipation
The high-efficiency BladeUPS reduces the power requirements
for the data center. In the example shown, the BladeUPS reduces
energy costs by an average of $273 per month. In addition, the
high efficiency of a BladeUPS reduces overall air conditioning
needs by more than one third; multiply that with a reduction in
cooling costs by one-third and utility bills are further decreased
by an additional $246 per month. The savings compound with the
data center size and the number of UPS products. The low heat
dissipation means this UPS can be located close to equipment
racks without a concern for creating hot spots in the data center.
Power protection for:
• Blade servers
The Eaton BladeUPS is made
in the U.S.A and is TAA Compliant.
• Small, medium and large data centers
• Network closets
• PBX and VoIP equipment
• Networking applications: IPTV, security
• Storage devices: RAID, SAN
• Database clusters
The BladeUPS remains cool even in a data center full of servers.
BladeUPS in a rack
(60 kW, N+1 redundant)
2
EATON CORPORATION
Eaton BladeUPS
www.eaton.com/bladeups 1.800.356.5794
3
Meet current and changing requirements with
modular architecture
Easy setup with simple parallel configuration
changes
The building block of the BladeUPS system is a 6U rackmount
module that provides 12 kW of backup power protection. The
system expands easily to provide maximum results. As your
data center grows, the system’s modularity plays a key role
in optimizing your capital planning and deployment. Using the
patented and field-proven Powerware Hot Sync paralleling
technology, up to six BladeUPS modules can be paralleled for extra
capacity or redundancy, providing 60 kW of redundant backup
power protection in one 19-inch rack.
Patented load-sharing control intelligently distributes the workload
among modules without requiring direct synchronization links
among them. Any module can provide backup support for any
other, with no interruption or downtime. For instance, in a
redundant system you could perform full maintenance on any
module without any interruption of conditioned power to the
protected IT equipment.
BladeUPS
Parallel Bar
YEAR 3:
YEAR 1:
YEAR 5:
EXPANSION
INITIAL INSTALL
FURTHER EXPANSION
Redundant N+1 configuration:
Six 12 kW UPS modules share
the load equally. If a UPS
module is removed from
service, the remaining
modules seamlessly support
the load without interruption.
BladeUPS
Parallel Bar for
paralleling UPS
modules
42U Eaton
enclosure
The BladeUPS is easy to install, configure, and deploy—and easy
to expand later, without help from Eaton. To link multiple BladeUPS
modules into a parallel configuration, all you need is a BladeUPS
Parallel Bar—a simple kit installed in the bottom of the rack and
on the back rail. IT personnel can then simply plug additional
modules into the parallel bus bar. The system is intelligent, so it
automatically detects paralleled modules and fully configures itself
for parallel operations.
Adding modules is a simple plug-and-power procedure for IT personnel
with safety-approved connectors.
Administrators can monitor and manage the BladeUPS using the
unit’s LCD panel or remote monitoring software. The UPS provides
data for the entire multi-module system, as well as the individual
module. In addition, a module working in a parallel configuration
can be separated at any time and re-deployed as a standalone
module to meet a data center's changing requirements.
Total rack
space: 24U
The BladeUPS Parallel Bar easily
connects up to six modules in parallel.
Three 12 kW UPS
modules = 36 kW
of backup power
The brightly backlit 2.6” LCD shows parameters of the system or a module.
12 kW BladeUPS
occupies 6U of
space
12 kW
6U electrical
wire-way
36 kW
60 kW, N+1
The BladeUPS is designed to be extraordinarily flexible—configured as a single
module or multi-module system (up to six modules) in a standard 19-inch rack
enclosure. The modular design enables you to deploy just the right amount of
backup protection at the right price for your current needs and expand later
whenever needed.
4
EATON CORPORATION
Eaton BladeUPS
Access parallel system information
Display output from multiple
modules on one screen
Display full system output from
any UPS
Review any UPS from any display
Display individual module
output voltage
Display individual module
output current
www.eaton.com/bladeups 1.800.356.5794
5
Expedite deployment with flexible
installation options
Save space with high power density UPS
The BladeUPS can be deployed in a variety of system architectures
to support the specific requirements of your computer room or
data center, and to support the desired level of redundancy (Tier I
through Tier IV, as defined by the Uptime Institute).
The BladeUPS offers the smallest footprint of any UPS in
its class, as well as double the power density of any other
UPS on the market. This compact design leaves more
space for IT equipment in the rack and data center.
42 "
44224""2 "
UPS
UPS
UPS
+
+
+
Battery
Battery
Battery
+
+
+
Bypass
Bypass
Bypass
Zone power protection for mid-sized computer rooms. Deploy
60 kW (N+1) in a 19-inch rack to protect a row of IT equipment
racks.
BladeUPS
UPS
60 kW N+1 modular
+
system with six-minute
Battery
BladeUPS
battery and automatic
BladeUPS
BladeUPS
60 kW
N+1 modular
+kW
60
kWwith
N+1six-minute
modular
60
N+1
modular
system
maintenance bypass
system
with
six-minute
system
six-minute
battery with
and automatic
Bypass
battery
and automatic
automatic
battery
and
maintenance
bypass
Hybrid power protection. Stronger redundancy of power
protection for equipment racks containing critical IT equipment.
.5".5"
5"
35
35.35
35 .5"
3 2.5
332.5
"" "
2.5
Battery
Battery
Battery
3 2.5 "
• For dual-corded loads with one source on a central UPS and
the other on utility power, you can back up selected loads
with a local BladeUPS, deployed in a distributed or zone
fashion.
• For dual- or single-corded loads on a central UPS, you can
back up selected loads with a local BladeUPS (distributed
or zone) in series with the central UPS. This configuration
provides maximum reliability close to critical loads, with
minimal heat dissipation and maximum efficiency.
72"
Total square feet = 17.8
Total square
square feet
feet =
= 17.8
17.8
Total
UPS
Bypass
Competitor
A: 60 kW N+1 modular
UPS
Bypass
UPS
Bypass
system with 128.8"
six-minute battery and
128.8"
128.8"
manual maintenance bypass
Competitor B: 60 kW N+1 system
Competitor
B: 60
60
kW N+1
N+1
system
Competitor
B:
kW
with
six-minute
battery
andsystem
internal
with
six-minute
battery and
and
internal
with
six-minute
battery
internal
manual
maintenance
bypass
manual
maintenance
bypass
manual
maintenance
bypass
UPS
UPS
UPS
UPS
+
+
UPS
UPS
+
+
Bypass
Bypass
+
+
Bypass
Bypass
Bypass
Bypass
Battery
UPS
Total
Competitor C: 60 kW N+1 system
Competitor
C: 60
60
kW N+1
N+1
system
Competitor
C:
kW
with
six-minute
battery
andsystem
internal
with
six-minute
battery and
and
internal
with
six-minute
battery
internal
manual
maintenance
bypass
manual maintenance
maintenance bypass
bypass
manual
UPS
UPS
UPS
UPS
+
+
UPS
UPS
+
+
Bypass
Bypass
+
+
Bypass
Bypass
Bypass
Bypass
Eaton also offers an assortment of plug-and-play power distribution
accessories with various input and output connections to distribute
power from the BladeUPS to rack power strips or directly to highpower servers. You can choose from distribution designs with
or without monitoring capability, for redundant or non-redundant
applications spanning from 0U to full rack height.
Total square
Total
square
Total
feet =square
29.1
feet =
= 29.1
29.1
feet
Bypass
Battery
Battery
Battery
footprints for 60 kW N+1 redundant application
footprints for
for 60
60 kW
kW N+1
N+1 redundant
redundant application
application
footprints
UPS
+
Bypass
Battery
Distributed power protection
Total square
Total
square
Total
feet =square
27.1
feet =
= 27.1
27.1
feet
Competitor B: 60 kW N+1 system
Battery
with six-minute
battery and internal
Battery
Battery
BladeUPS system footprint compared to
competitors’
manual
maintenance
bypass
BladeUPS system
system footprint
footprint compared
compared to
to competitors’
competitors’
BladeUPS
Battery
Battery
Battery
Zone power protection
With the flexibility to deploy and re-deploy a BladeUPS either in
single or parallel systems—data center managers can tailor power
protectionfeet
to adapt
to changing needs, often without the need for
square
= 17.8
an electrician or service technician.
128.8"
117.6"
117.6"
117.6"
3 3.4
333.4
"" "
3.4
Total square feet = 7.0
72"
72"
72"
Battery
Battery
Battery
Centralized power protection—dual power feeds
Distributed power protection. Distribute 12 kW modules to protect one to three racks—thereby achieving zero footprint power protection.
maintenance bypass
bypass
maintenance
Total square feet = 7.0
Total square
square feet
feet =
= 7.0
7.0
Total
Competitor A: 60 kW N+1 modular
Competitor
A:
60 kW
kW N+1
N+1
modular
Competitor
60
modular
system
with A:
six-minute
battery
and
system
with
six-minute battery
battery
and
system
with
six-minute
manual
maintenance
bypassand
manual maintenance
maintenance bypass
bypass
manual
Centralized power protection
Centralized power protection for small computer rooms.
Start with one 12 kW module and expand to 60 kW with N+1
redundancy in single 19-inch rack enclosure.
24"
24"
24"
24"
System architecture with the BladeUPS
UPS
+
Bypass
Total square
feet = 29.1
Hybrid power protection
Central large UPS
Battery
117.6"
3 3.4 "
Competitor C: 60 kW N+1 system
with six-minute battery and internal
manual maintenance bypass
Battery
UPS
+
Bypass
UPS
+
Bypass
Total square
feet = 27.1
Battery
BladeUPS system footprint compared to competitors’
footprints for 60 kW N+1 redundant application
Rack enclosure with
blade servers
6
EATON CORPORATION
Eaton BladeUPS
BladeUPS
www.eaton.com/bladeups 1.800.356.5794
7
Count on reliable system performance and uptime
Simplify UPS installation and maintenance
Recognizing the mission-critical nature of data center operations,
the BladeUPS has been designed for premium reliability and
continuous operation. The rackmount BladeUPS incorporates
leading technologies that Eaton developed for its largest UPSs,
such as:
The BladeUPS is easy to install, configure and deploy. All
BladeUPS modules (UPS and battery) come with rackmount kits for
easy installation in standard equipment racks. In-house IT staff can
install and service this UPS themselves. Adding parallel units for
future expansion is a simple, plug-and-play procedure.
Robust paralleling. With Eaton’s patented Powerware Hot Sync
technology, UPS modules work in peer-to-peer fashion when
configured in a parallel system. Most other paralleling systems
on the market use a single central main controller with a backup
controller. If the main controller fails, the system must recognize
this and transfer control to the backup control, or the entire system
fails. With Eaton’s patented approach, each UPS module operates
independently, yet is completely synchronized with the others.
There is no change in control, therefore no single point of failure.
The BladeUPS battery trays are user-replaceable so that one
person, working alone, can replace the battery without disrupting
data center operations or power to protected equipment.
Intelligent maintenance bypass switch. The internal switch
inside the UPS chassis automatically activates bypass mode
whenever a power module is removed. This feature ensures that
power to protected loads is not accidentally interrupted by human
error. (If the UPS is in a parallel environment with N+1 redundancy,
removing an electronics module only causes that particular UPS
module to go offline while the protected equipment is supported
by other modules in the configuration).
Eaton's ABM technology significantly increases battery service life.
Flexibly distribute power to racks
With Eaton’s rack power module (RPM)
Most IT teams are confident managing the BladeUPS without
outside help because of its simplicity. However, Eaton is ready
to provide support with its world-class service organization of
300 customer service technicians in North America and 1,200
internationally. These factory-certified and trained service
technicians deliver 7x24 support including on-site corrective
and preventive maintenance, battery solutions, service training,
integration services and spare parts.
IT staff can easily install electronics modules.
The BladeUPS is also compatible with Eaton’s eNotify Remote
Monitoring system, which features 7x24 real-time monitoring
of 100+ UPS and battery alarms, with Eaton’s staff of technical
experts able to respond immediately and resolve many issues
remotely. eNotify delivers monthly e-mail reports that detail UPS
performance and alarm history.
Static bypass switch. All BladeUPS modules have their own static
switch for normal operations and for internal bypass in case of a
high overload condition, output load fault or internal failure.
Partner the BladeUPS with an RPM to create a highly flexible,
adaptable power delivery architecture at the rack level. The RPM
delivers up to 36 kW of power in an organized manner to loads of
various voltages, power cords and layouts.
Flexible runtime options
Hot-swappable electronics and battery modules. Replacing
batteries or electronics modules can be done in minutes without
interrupting power to IT equipment. This hot-swap capability helps
reduce mean time to repair (MTTR) and dramatically improves the
availability of the protected IT equipment.
The 3U RPM can be deployed in the same rack with the UPS and
IT equipment; there’s no need for a dedicated infrastructure rack.
The resulting architecture has fewer cables to manage, fewer
distribution points to monitor and greater flexibility for IT personnel
to make changes without an electrician.
Each BladeUPS can be configured with its own external battery
backup. The BladeUPS design eliminates this single point of failure.
Competitive, modular systems use a centralized battery bank with
a shared connection point that presents a potential single point of
failure.
Eaton's advanced battery management technique. ABM
technology significantly extends battery service life with a unique
three-stage charging technique. The UPS automatically tests
battery health and provides advance notification when preventive
maintenance is needed, allowing ample time to hot-swap batteries
without ever having to shut down connected equipment.
Consider a Tier II data center with 42 racks at 5 kW per rack: the
BladeUPS with RPM can meet power requirements with half the
number of racks, 60 percent less rack space, 45 percent less
cabling and 41 percent less square footage than other vendors’
power distribution products that require dedicated racks. These
advantages make the BladeUPS with RPM ideal for distributed
protection in small to mid-sized data centers, or to add zone
protection in large data centers that have centralized UPSs.
BladeUPS extended battery module
BladeUPS Typical Battery Runtime Chart (in minutes)
Single Module
+ 1 EBM
+ 2 EBMs
+ 3 EBMs
+ 4 EBMs
4.7
9.5
17
27
34
5.4
10.9
20
30
38
83%
6.2
13
22
33
42
9
75%
7.3
15
24
38
48
8
67%
8.7
18
28
43
55
7
58%
10.7
23
32
50
64
6
50%
13.6
27
42
60
76
5
42%
18.5
33
51
73
94
4
33%
23
42
66
94
120
3
25%
30
56
89
128
165
2
17%
44
85
137
199
258
Load kW
Load %
12
100%
11
92%
10
Internal Battery
Eaton RPM
IT staff can easily replace battery modules.
BladeUPS Typical Battery Runtime Chart (Parallel UPS, in minutes)
Number of
Total
UPS Models Load kW
8
EATON CORPORATION
Eaton BladeUPS
Internal
Battery
+1 EBM
per UPS
+2 EBMs
per UPS
+3 EBMs
per UPS
+4 EBMs
per UPS
Min
EBMs
Min
EBMs
Min
EBMs
Min
6
60
6.2
13
6
22
12
33
18
42
24
N+1
83%
10
5
48
6.7
13
5
23
10
35
15
44
20
N+1
80%
9.6
4
36
7.3
15
4
24
8
38
12
48
16
N+1
75%
9
3
24
8.7
18
3
28
6
43
9
55
12
N+1
67%
8
2
12
14
27
2
42
4
60
6
76
8
N+1
50%
6
EBMs Configuration Load %
kW per
UPS
Modules
www.eaton.com/bladeups 1.800.356.5794
9
Technical specifications1
Monitor the power infrastructure from anywhere
You can monitor the BladeUPS over your LAN or the Internet to
stay informed of conditions in the power protection infrastructure.
General characteristics
Power rating
Efficiency
Heat dissipation
Cooling
With Intelligent Power® Manager supervisory software, you get
a global view across the network from any PC with an Internet
browser. Exceptionally versatile, the software is compatible with
power devices supporting a network interface, including other
manufacturers’ UPSs, environmental sensors, ePDUs, shutdown
applications and more.
Audible noise,
normal operation
Altitude before derating
Input characteristics
Input voltage
Voltage range
In the event of an extended power outage, Eaton's free NetWatch
software works in conjunction with the ConnectUPS X-Slot®
Web/SNMP card to allow you to gracefully and sequentially shut
down connected devices, including virtual machines. NetWatch is
compatible with ESXi and vSphere from VMware.
Eaton NetWatch Client 5.0 has tested compatible
with Cisco Unified Communications Manager 4.3
Intelligent Power Manager supervisory software is included at no
charge (up to 10 nodes) with the BladeUPS.
Frequency range
Input current distortion
Input power factor
Inrush current
Input requirements
Bypass source
Generator compatibility
Using Power Xpert® software, you can also monitor the status of
multiple UPSs and ancillary devices to accurately diagnose past
events and predict future conditions.
FORESEER® software analyzes thousands of data points to
proactively manage key equipment throughout an enterprisewide infrastructure. This system interfaces with an extensive
collection of devices from most major manufacturers of power and
environmental equipment, as well as subsystems for fire detection
and suppression, security, fuel handling and building controls.
Rated output voltage
Output configuration
Output frequency
(nominal)
Frequency regulation
Load power factor range
Gain a new level of confidence
Total output
voltage distortion
The innovative BladeUPS delivers reliable, energy-efficient backup
power protection for your organization’s critical IT systems today as
well as the flexibility to support your changing needs tomorrow.
Battery characteristics
Battery type
Battery runtime (internal)
Power Xpert software was designed to seamlessly handle Eaton’s
communicating equipment in a graphical manner without additional
serial interfaces, protocols or customization.
Battery string voltage
Battery test
50 or 60 Hz, ±5 Hz
<5% with IT loads
(PFC power supplies)
>0.99 with IT loads
(PFC power supplies)
Load dependent
Three-phase, four-wire + ground
Same as input (single feed)
Fast sync slew rate for generator
synchronization
208V model: 180 to 225 Vac, Ph to Ph
400V model: 180 to 240 Vac, Ph to N
Three-phase, four-wire + ground
50 or 60 Hz auto-detection on startup
0.1 Hz free running
Lagging: 0.7
Leading: 0.9
<3% with IT loads (PFC power supplies)
<5% non-linear or non-PFC power supplies
VRLA - AGM
13 minutes at 50% load
4.8 minutes at 100% load
240 Vdc
Automatic battery test standard
(remote scheduling capable);
manual battery test from front display
ABM three-stage charging technology
Variable from 1.67 VPC at <5 min runtime
to 1.75 VPC at >90 min runtime
Announced with alarm
Yes, add up to four additional 3U battery
enclosures (~34 min at 100% load,
>1 hour at 50% load)
Battery recharge profile
Battery cut-off voltage
• Versatile power distribution products and cable management
accessories make it easy to deliver power exactly where
needed, even as data centers adapt and evolve
Battery low condition
Extended battery
capability
• Attractive and functional enclosures and structured wiring
closets turn any location into a virtual, secure data center
Physical characteristics
Dimensions H x W x D,
in (mm)
1.800.356.5794
www.eaton.com/bladeups
UPS: 1
0.3 (6U) x 17.4 x 26.0
(267 x 442 x 660)
EBM: 5
.2 (3U) x 17.2 x 26
132 x 437 x 660)
Note:
Total chassis weight without batteries or electronics: 100 lb (46 kg)
Total chassis weight with batteries or electronics: 307 lb (140 kg)
Total UPS weight
without batteries
Total UPS weight
with batteries
EBM weight
X-Slot Bays
Optional X-Slot
communication cards
208 Vac and 400 Vac models
208V model: 180 to 265 Vac
400V model: 311 to 519 Vac
• Rackmount and freestanding power protection systems deliver
computer-grade power with battery backup throughout a data
center
Learn more about complete, integrated solutions for
protecting and organizing your IT equipment.
Software compatibility
1000 meters (3300 ft ASL)
Output characteristics
Software and connectivity options provide a unified window into
the state of IT and facilities systems. With this level of visibility,
you can transform the power system into a powerful strategic
asset.
Eaton offers a full line of technology solutions designed to address
the power crunch in IT infrastructures. In fact, Eaton offers
solutions for the entire power system, from the point where utility
power enters your facility all the way to the individual server.
Eaton’s solutions for the computer room include:
12 kW per UPS module
Up to 98%
371W/1266 BTU/hr at 100% rated load
Fan cooled, temperature microprocessor
monitored; front air entry, rear exhaust
<60 dBA at 1 meter
Communications and user interface
135 lb (61 kg)
307 lb (140 kg)
170 lb (77 kg)
A configurable user interface displays critical data center information
with FORESEER software.
Control panel LCD
Multi-language
Configuration changes
Dry contact inputs
Dry contact outputs
UPS ships with Software Suite CD
containing Intelligent Power Manager
supervisory software and NetWatch
protection software
Two available for the cards listed below
Application:
PowerXpert Gateway Series 2000 card
Web/SNMP: Connect UPS card
Modbus RTU: Modbus card
Modbus TCP/IP: PowerXpert Gateway
Series 2000 card
IBM eServer™ (i5™, iSeries™, or AS/400®):
Relay interface card
N/O, N/C (dry contacts): Industrial
relay card
Parallel: Powerware Hot Sync
CAN Bridge card
Two lines by 20 characters
Four menu-driven interface buttons
Four status-at-a-glance LEDs
English standard; 20 languages available
User capable, firmware auto configures
Two, user-configurable
One, user-configurable
Service
Installation
Preventive maintenance
Corrective maintenance
Serviceability features
User capable, located in the IT racks
User capable, optional factory
service available
User capable, optional factory
service available
Hot-swappable batteries
Hot-swappable electronics module
Automated internal maintenance bypass
Auto-configure firmware
Flash firmware upgradeable
Certifications
Safety
208V model: UL1778, cUL
400V model: CE
EMI
208V model: FCC Part 15 Class A
400V model: EN 62040-2 Class A
ANSI C62.41, Cat B-3
EU Directive 2002/95/EC
Category 3 (4 of 5)
Surge protection
Hazardous materials
(RoHS)
Warranty
Standard
Warranty repair
18 months from date of shipment
Factory depot repair or replace
Service Support Agreements2
Depot
On-site 5x8
On-site 7x24
PowerTrust Express
PowerTrust Value
PowerTrust eight-, six- or two-hour
response
Options and accessories
Detachable input cord
Detachable input/output cord assembly
Detachable paralleling cord assembly
EBMs
3U output sub-distribution module
0U to 3U rack power strips
60 kW BladeUPS Parallel Bar, Top Entry, Bottom Entry &
4-high versions
Four-post rail kit
Environmental Monitoring Probe (EMP) for temperature and humidity
monitoring
X-Slot communication cards (see Communications and user interface
section)
3U Maintenance Bypass Module
External Battery Interconnect for use with 400V models
1. D
ue to continuing product improvement programs, specifications are subject
to change without notice.
2. eNotify Remote Monitoring and 7x24 technical support included.
10
EATON CORPORATION
Eaton BladeUPS
www.eaton.com/bladeups 1.800.356.5794
11
UNITED STATES
8609 Six Forks Road
Raleigh, NC 27615 U.S.A.
Toll Free: 1.800.356.5794
www.eaton.com/bladeups
CANADA
Ontario: 416.798.0112
Toll free: 1.800.461.9166
LATIN AMERICA
South Cone: 54.11.4124.4000
Brazil: 55.11.3616.8500
Andean & Caribbean:
1.949.452.9610
Mexico & Central America:
52.55.9000.5252
EUROPE/MIDDLE EAST/AFRICA
Denmark: 45.3686.7910
Finland: 358.94.52.661
France: 33.1.6012.7400
Germany: 49.0.7841.604.0
Italy: 39.02.66.04.05.40
Norway: 47.23.03.65.50
Portugal: 55.11.3616.8500
Sweden: 46.8.598.940.00
United Kingdom: 44.1753.608.700
ASIA PACIFIC
Australia: 61.2.9693.9366
New Zealand: 64.0.3.343.3314
China: 86.21.6361.5599
HK/Korea/Taiwan: 852.2745.6682
India: 91.11.4223.2300
Singapore/SEA: 65.6825.1668
Eaton, Powerware, BladeUPS,
ABM, Intelligent Power, PowerChain
Management, Power Xpert, FORESEER,
Powerware Hot Sync and X-Slot are trade
names, trademarks, and/or service marks
of Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are property
of their respective owners.
©2010 Eaton Corporation
All Rights Reserved
Printed in USA
BLADEUPS02FXA
April 2010
Open as PDF
Similar pages