Analytical balance KERN AES-C · AEJ-CM 03 Compact high-end analytical balance with useful pipette calibration program and alibi memory Features • only AEJ-CM: Automatic internal adjustment in the case of a change in temperature > 0,8 °C and time-controlled every 3 hours • Intuitive pipette calibration function to ensure data integrity and to minimise the risks in the daily work with your pipettes •Higher weighing speed by switching off the last digit •Modern all glass draught wind shield for ideal visibility of the weighing object •Dispensing mode: By pressing one key you can set all relevant parameters for dispensing •Alibi memory: Paperless archiving of up to 100,000 weighing results. Additional information on page 11. Accessories •Note: For weighings where verification is mandatory, and which are to be analysed and processed by a PC, the legislative body requires electronic archiving using a verifiable, non-manipulatable data memory •Internal memory for up to 999 weighing results, 1000 items or recipe ingredients, 100 container weights, 100 users Technical data •Large backlit LCD display, digit height 17 mm •Weighing plate dimensions, stainless steel, Ø 85 mm •Overall dimensions WxDxH 206x335x335 mm •Weighing space WxDxH 168x160x225 mm •Net weight approx. 5 kg •Permissible ambient temperature 18 °C / 30 °C STANDARD •Protective working cover, standard. Can be re-ordered, scope of delivery: 5 items, KERN ALS-A02S05 •Set for density determination of liquids and solids with density ≤/≥ 1, Step-by-step user guidance and calculated density shown immediately on the display. For interesting facts about density determination see page 214, KERN YDB-03 •only AEJ-CM: Alibi memory soware for viewing and saving data from the alibi memory onto a PC connected to the system, KERN PET-A16 •WLAN interface for wireless connection to networks and WLAN capable devices, such as tablets, laptops or smartphones, must be ordered at purchase, please ask for delivery time, KERN PLJ-A06 •Suitable printers see page 177 ff. OPTION ALIBI only AEJ-CM FACTORY MULTI only AEJ-CM Options Linearity ReproVerification Minimum Readout Weighing Verification DAkkS Calibr. Certificate ducibility load value range [Min] [d] [e] [Max] mg mg mg mg mg g KERN KERN KERN AES 100-4C 160 0,1 – – 0,2 ± 0,2 – – 963-101 220 0,1 – – 0,2 ± 0,2 – – 963-101 AES 200-4C Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible. Verification at the factory, we need to know the full address of the location of use. AEJ 200-5CM 82 | 220 0,01 | 0,1 1|1 1 0,04 | 0,1 ± 0,1 | 0,2 965-201 963-101 AEJ 100-4CM 160 0,1 1 10 0,2 ± 0,3 965-201 963-101 220 0,1 1 10 0,2 ± 0,3 965-201 963-101 AEJ 200-4CM Model 48  7433 For more information, please visit kern-sohn.com/en/AES-C_AEJ-CM Order Hotline: · OrderGo hotline to back +49 page of catalogue 9933 - 0 Analytical balances KERN & SOHN GmbH • Ziegelei 1 • 72336 Balingen • Deutschland • Tel. + 49-7433-9933-0 • Fax + 49-7433-9933-149 • www.kern-sohn.com• firstname.lastname@example.org KERN Pictograms: ALIBI Internal adjusting: Quick setting up of the balance‘s accuracy with internal adjusting weight (motordriven). Piece counting: Reference quantities selectable. Display can be switched from piece to weight. Suspended weighing: Load support with hook on the underside of the balance. Adjusting program CAL: For quick setting up of the balance‘s accuracy. External adjusting weight required. Recipe level A: Separate memory for the weight of the tare container and the recipe ingredients (net total). Battery operation: Ready for battery operation. The battery type is specified for each device. Memory: Balance memory capacity, e.g. for article data, weighing data, tare weights, PLU etc. Recipe level B: Internal memory for complete recipes with name and target value of the recipe ingredients. User guidance through display. Rechargeable battery pack: Rechargeable set. Alibi memory: Electronic archiving of weighing results, complying with the 2009/23/EC standard. Recipe level C: Internal memory for complete recipes with name and target value of the recipe ingredients. User guidance through display, adjustment of recipe when dosages are exceeded, multiplier function, barcode. Data interface RS-232: To connect the balance to a printer, PC or network. MULTI Universal mains adapter: with universal input and optional input socket adapters for A) EU, GB B) EU, GB, CH, USA C) EU, GB, CH, USA, AUS Mains adapter: 230V/50Hz in standard version for EU. On request GB, USA or AUS version available. RS-485 data interface: To connect the balance to a printer, PC or other peripherals. High toler ance against electromagnetic disturbance. Totalising level A: The weights of similar items can be added together and the total can be printed out. Power supply: Integrated in balance. 230V/50Hz standard EU. More standards e.g. GB, USA or AUS on request. USB data interface: To connect the balance to a printer, PC or other peripherals. Totalising level C: Internal memory for complete recipes with name and target value of the recipe ingredients. User guidance through display, adjustment of recipe when dosages are exceeded, multiplier function, barcode recognition. Weighing principle: Strain gauge Electrical resistor on an elastic deforming body. WLAN data interface: To transfer data from the balance to a printer, PC or other peripherals. Percentage determination: Determining the deviation in % from the target value (100 %). Weighing principle: Electromagnetic force compensation Coil inside a permanent magnet. For the most accurate weighings. Control outputs (optocoupler, digital I/O): To connect relays, signal lamps, valves, etc. Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Please refer to KERN‘s website for more details. Weighing principle: Single cell technology Advanced version of the force compensation principle with the highest level of precision. Interface for second balance: For direct connection of a second balance. Weighing with tolerance range: Upper and lower limiting values can be programmed individually for e.g. dosing, sorting and portioning. Verification possible: The time required for verification is specified in the pictogram. Network interface: For connecting the scale to an Ethernet network. With KERN products you can use a universal RS-232/LAN converter. Hold function: (Animal weighing program) When the weighing conditions are unstable, a stable weight is calculated as an average value. DAkkS calibration possible (DKD): The time required for DAkkS calibration is shown in days in the pictogram. Wireless data transfer: between the weighing unit and the evaluation unit using an integrated radio module. Protection against dust and water splashes IPxx: The type of protection is shown in the pictogram. Package shipment: The time required for internal shipping preparations is shown in days in the pictogram. GLP/ISO log: The balance displays the weight, date and time, regardless of a printer connection. ATEX explosion protection: Suitable for use in hazardous industrial environments, in which there is explosion danger. The ATEX marking is specified for each device. Pallet shipment: The time required for internal shipping preparations is shown in days in the pictogram. GLP/ISO log: With weight, date and time. Only with KERN printers. Stainless steel: The balance is protected against corrosion. Warranty: The warranty period is shown in the pictogram. Bluetooth* data interface: To transfer data from the balance to a printer, PC or other peripherals. Weighing principle: Tuning fork A resonating body is electromagnetically excited, causing it to oscillate. KERN – Precision is our business To ensure the high precision of your balance KERN offers you the the appropriate test weight in the international OIML error limit classes E1-M3 from 1 mg - 2000 kg. In combination with a DAkkS calibration certificate the best pre-requisite for proper balance calibration. The KERN DAkkS calibration laboratory today is one of the most modern and best-equipped DAkkS calibration laboratories for balances, test weights and forcemeasurement in Europe. Thanks to the high level of automation, we can carry out DAkkS calibration of balances, test weights and force-measuring devices 24 hours a day, 7 days a week. Range of services: • DAkkS calibration of balances with a maximum load of up to 50 t • DAkkS calibration of weights in the range of 1 mg – 2500 kg • Database supported management of checking equipment and reminder service • Calibration of force-measuring devices • DAkkS calibration certificates in the following languages D, GB, F, I, E, NL, PL Your KERN specialist dealer: *The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by KERN & SOHN GmbH is under license. Other trademarks and trade names are those of their respective owners.