Heavy duty Codelock
PVD, weather resistant, low maintenance finish
Full size lever handles
Outside
lever has a slipping clutch to avoid
damage to the mechanism if forced
Easy code change as often as required
Code Free option available
Mortice lock and mortice latch functions
Codelock CL500 Range
This is a heavy duty range with full size lever
handles, allowing use as the primary lock on
most doors, particularly in high traffic situations.
The functions available allow for various ways
of managing entry by code, by key and by
Code Free operation of the lever handle on
the CL505, CL515 and CL525 models.
Throwing the deadbolt of the CL520/525 models will
lock out the code users when appropriate. A safety
feature ensures that the inside lever handle will retract
the deadbolt so avoiding accidentally locking a person
in the room.
The key can be used to retract the latchbolt and so
may be issued for cleaning and security staff use.
• Ball shape knob available for all versions
38
Available in two PVD finishes
Stainless Steel, Polished Brass
CL500
The front plate is
common to all functions
CL520 Mortice Lock
With safety feature
CL510 Mortice Latch
CL515 Mortice Latch
with Code Free entry option
CL510BB Mortice Latch
May be specified as Back to Back
(BB) to provide coded access in
both directions
Stainless Steel finish only
CL525 Mortice Lock
With safety feature and Code Free
entry option
CL500 Plates Only
Utilising existing door lock or latch
CL500BB C L500 Back to Back Plates
For use with existing door lock or latch
Stainless Steel finish only
CL505 Plates Only
As CL500 with Code Free entry option
CL500 NB: For CL500 & CL505 existing
lock must have either a fixing hole
(22mm 7/8”) below follower (spindle)
or two horizontal holes either side
of the follower (38mm 11/2”).
anic Kit
P
Coded front plate only with extra
long spindle to work with most
single point panic pads or bars
(not supplied)
www.codelocks.com
39
Door thickness 35mm - 65mm (13/8”-21/2”)
Spindle type 2 part 8mm (5/16”) spring loaded spindle
Body material Zinc alloy
Non handed Lock will fit doors hung on the left or right
Mortice Latch (CL510 & CL515)
Medium duty, stainless steel latchbolt head with
“anti” shim deadlocking plunger, 8mm (5/16”) follower.
Codelock CL500 Range
Technical S pecifications
40
60mm (23/8”) backset, requires 25mm (1”) hole,
82mm (31/4”) deep.
70mm (23/4”) backset, requires 25mm (1”) hole,
92mm (35/16”) deep.
Mortice Lock (CL520 & CL525)
Euro profile mortice sash lock with deadbolt and
latchbolt. Complete with double cylinder to control
deadbolt and to retract latchbolt. With the deadbolt
locked it denies access to a code user. The key can be
used to open doors for management functions such
as security and cleaning. The split follower enables the
inside lever to retract the deadbolt and latch to prevent
accidental lock in when the deadbolt is thrown.
Cylinders
Double euro profile cylinders with 3 keys.
May be ordered keyed alike.
Finishes available
PVD (Physical Vapour Deposition) hardwearing low
maintenance finishes SS (stainless steel) and PB
(polished brass).
Code Free access option via keypad on models CL505,
CL515 & CL525.
Neoprene seals are included on both sides to provide
friction against the face of the door and to prevent damage
from over tightening of the fixing bolts. The outside lever
handle has a slipping clutch to prevent damage to the lock
if the handle is forced.
Suitable for internal and external use.
CL520
CL525
60mm (23/8”)
Dimensions including Neoprene
seal are 189x60mm (77/16” x 23/8”)
CL510 Mortice Latch
Outside lever handle will retract the
latch after a correct code is entered.
The spring loaded latchbolt will lock
automatically when the door is closed.
CL515 Mortice Latch
As CL510 with Code Free access
option on keypad. In Code Free
mode the outside lever will retract the
latchbolt without using a code.
CL500 & CL505 Front & backplates
only NOT ILLUSTRATED
For use with an existing lock or latch.
NB: For CL500 & CL505
existing lock must have either
a fixing hole (22mm 7/8”) below
follower (spindle) or two
horizontal holes either side
of the follower (38mm 1 1/2”
centres)
CL500PK Panic Device Access Kit
NOT ILLUSTRATED
Keypad plate only, supplied with an
extra long spindle to work with most
exit devices with 8mm (5/16”)
square followers.
Stainless Steel finish only.
235mm (95/8”)
57mm (21/4”)
30mm (13/16”)
177mm (7”)
25mm (1”)
48mm (17/8”)
177mm (7”)
48mm (17/8”)
CL510
CL515
72mm
(27/8”)
155mm (61/8”)
55mm (2 /16”)
84mm (35/16”)
3
Dimensions
including
Neoprene seal
are 189x60mm
(77/16” x 23/8”)
CL520 Full Mortice Lock with
Safety Feature
Outside lever handle will retract the
latch after a correct code is entered.
The spring loaded latchbolt will
lock automatically when the door is
closed. Key retracts latchbolt for entry
without using a code. Key controls
deadbolt position. When deadbolt is
projected it denies access by code.
When deadbolt is projected the
safety feature allows the inside lever
handle to retract the deadbolt and
the latchbolt, preventing people being
accidentally locked in.
Codes: All our
mechanical locks are
supplied with a random
code commencing with
the `C` clear button. To
change the code after
fitting, the lock must
first be removed from
the door.
The code is non
sequential, that is the
code can be entered
in any order e.g. 1234
can be 4321 or 1342 or
whatever is the most
convenient sequence.
With the 11 buttons a
total of 2,047 different
codes are available,
any of which may be
entered in any order.
CL525 Full Mortice Lock with
Safety Feature
As CL520 with Code Free access
function on the keypad. In Code
Free mode the outside lever will retract
the latchbolt without using a code.
Back to Back NOT ILLUSTRATED
The CL500 and the CL510/CL515
(Mortice Latch) may be ordered with
two keypad plates for installation
on both sides of the door to provide
coded access in both directions.
Stainless Steel finish only.
www.codelocks.com
41
Open as PDF
Similar pages