AB GETTinG STARTED (Quick Guide) PHONE CLIP C 1

Getting started (Quick Guide)
PHONE CLIP
Before you can use your
NOTE! Check with your hearPhone Clip it is necessary to: ing healthcare professional
to determine if your instruA. Charge your Phone Clip
ments have been pre-paired.
Instruments that have been
B. Pair with your hearing
prepaired do not need to be
instrument
paired again.
C. Pair with your mobile
phone
D. Connect to your mobile
phone
A
CHARGE YOUR PHONE CLIP
1. Plug one end of the
charging cable into the
Phone Clip.
1.
2. Plug the other end of the
charging cable into an electric wall outlet.
2.
3. Generally, charging is
complete when the red LED
indicator turns green. However, when charging for the
first time allow it to charge
for at least 3 hours, even if
the LED turns green before 3 hours have elapsed.
B
PAIR WITH YOUR HEARING INSTRUMENT
1. Turn on your Phone Clip
by pressing and holding the
multifunctional button for 3
seconds. A solid blue light
will display for 3 seconds
and then go dark once the
phone clip is turned on.
2. Open the battery doors
on both hearing instruments.
3.
1.
Multifunctional
button
2.
3. Remove the cover from
the Phone Clip.
3.
4. Press the pairing button
to put the Phone Clip in pairing mode for 20 seconds.
5. While in pairing mode
close the battery doors on
both hearing instruments.
6. Successful pairing will
be indicated by an audible
melody played in both hearing instruments. Replace
the cover on the Phone Clip
once pairing is complete.
4.
C
3. Press and hold the
Multi-function button on the
Phone Clip until the LED light
turns on, off and then on
again. Now the phone clip
will be in Bluetooth pairing
mode for two minutes.
PAIR WITH YOUR MOBILE PHONE
1. Turn off your Phone Clip
by pressing and holding the
multifunctional button for
about 3 seconds until the
LED indicator flashes quickly
4 times and then goes dark.
NOTE: If you should release
the button before pairing
mode has been activated,
turn the Phone Clip off and
start again.
2. Turn on your mobile
phone and place it next
to the phone clip.
5.
Multifunctional
button
Multifunctional
button
4. Locate the “Bluetooth”
option in the mobil phone
menu, and search for Bluetooth™ devices.
TIP: Ensure that the Bluetooth feature is activated on
your mobile phone.
4.
Search for a device or Listen
for a device to find me?
Search
5.
NOTE: Select “Headset” if
asked which Bluetooth
service you wish to enable.
BT device XXXXXXX
BT device XXXXXXX
Hearing Aid Phone
5. From a list of discovered
Bluetooth devices,
select “Hearing Aid Phone.”
6. Enter a passcode of
“0000” (four zeros) if
prompted.
Add Device
BT device XXXXXXX
6.
Enter numeric passkey
for Bluetooth Device:
D
CONNECT WITH YOUR MOBILE PHONE
1. In most instances,
the phone will ask you to
confirm your intention to
connect with the Phone Clip
after successfully pairing.
2. If you have to manually
connect: Locate a list of
“Paired Devices” in your
phone’s Bluetooth” menu.
From that list, highlight
“Hearing Aid Phone”
and select “Connect.”
3. You are now ready to use
your Phone Clip.
1.
?
Pairing complete
Connect to Bluetooth
Device?
Yes
•Typically, pairing is a procedure that only needs to be
conducted as part of the initial setup procedure and does
not need to be repeated.
No
TIP: In most instances,a
headset symbol on the main
screen of your mobile phone
will confirm that you have
successfully connected.
Worldwide headquarters
GN ReSound A/S
Lautrupbjerg 7
DK-2750 Ballerup, Denmark
Tel.: +45 45 75 11 11
Fax: +45 45 75 11 19
www.resound.com
HELPFUL TIPS:
•You may need to repeat the connection procedure if the
devices are turned off or moved out of range.
•On some phones you can configure “Automatic Reconnection.” Refer to the user guide of your mobile phone for
instructions on how to do this.
Tips and Support
For more details on the ReSound Unite Phone
Clip, refer to the user guide. For further support,
tips and videos, go to the ReSound Unite website
on www.resound.com/products/unite
United Kingdom
GN ReSound Ltd.
Kirtlington Business Centre
Portway
Kirtlington
Oxon OX5 3JA
Tel.: +44 1869 352 800
Fax: +44 1869 343 466
www.gnresound.co.uk
NOTE: Step-by-step instructions for pairing your
Phone Clip with various mobile phones can be accessed at: http://jabra.pairx.co.uk/?l=28&pp=1067
17427200-GB-10.12 Rev. C
C. PAIR WITH YOUR MOBILE PHONE .....continued
Australia
GN ReSound Pty. Ltd.
Unit R1 Regents Park Estate
391 Park Road
Regents Park NSW 2143
Tel.: (free) 1800 658 955
Fax: +61 2 9743 7472
www.gnresound.com.au
New Zealand
GN ReSound (NZ) Ltd.
12 Parkway Drive
Mairangi Bay
Auckland
Tel.: (free) 0800 900 126
Fax: (free) 0800 007 695
www.gnresound.co.nz
Canada
GN ReSound Canada
303 Supertest Road
Toronto, Ontario
CANADA M3J 2M4
Tel.: +1 888 737 6863
Fax: +1 800 666 4089
canada@gnresound.com
www.gnresound.ca
Getting started (Quick Guide)
Open as PDF
Similar pages