1605-1S1512
Commercial Air Conditioners 2016
Split Commercial A/C
Commercial Air Conditioner Division
Midea Group
Add.: West Region of Midea Commercial Air Conditioner Department, Industry Avenue,
Beijiao, Shunde, Foshan, Guangdong, P. R. China
Midea CAC After-service Application
Midea CAC News Application
Postal code: 528311
Tel: +86-757-26338346 Fax: +86-757-22390205
cac.midea.com
global.midea.com
Note: The data in this book may be changed without notice for further improvement
iOS Version
Android Version
iOS Version
on quality and performance.
R410A 50Hz
Midea CAC
Midea CAC is a key division of the Midea Group, a leading producer of consumer appliances and provider of heating, ventilation
There are three production bases: Shunde, Chongqing and Hefei.
and air conditioning solutions. Midea CAC has continued with the tradition of innovation upon which it was founded, and
MCAC Shunde: 38 product lines focusing on VRF, Split Products, Heat Pump Water Heaters, and AHU/FCU.
emerged as a global leader in the HVAC industry. A strong drive for advancement has created a groundbreaking R&D
MCAC Chongqing: 14 product lines focusing on Water Cooled Centrifugal/Screw/Scroll Chillers, Air Cooled Screw/Scroll Chillers,
department that has placed Midea CAC at the forefront of a competitive field. Through these independent efforts and joint
and AHU/FCU.
cooperation with other global enterprises, Midea has supplied thousands of innovative solutions to customers worldwide.
MCAC Hefei: 11 product lines focusing on VRF, Chillers, and Heat Pump Water Heaters.
2015 JV with Carrier in China in chiller field, BOSCH in VRF production and Siix in smart control
2014 Launched the duct indoor unit with belt drive fan globally
2010 Built the 3rd manufacturing base in Hefei
2008 Launched the rooftop package ClimaMaster globally
2007 Won the first Midea centrifugal chiller project overseas
2006 Launched the first VSD centrifugal chiller
2004 Acquired MGRE entered the chiller industry
2001 Partnered with Copeland to develop the digital scroll VRF system
2000 Developed the first inverter VRF With Toshiba
1999 Entered the CAC field
Midea Company
Introduction
Midea CAC
Introduction
Midea CAC
Midea CAC is a key division of the Midea Group, a leading producer of consumer appliances and provider of heating, ventilation
There are three production bases: Shunde, Chongqing and Hefei.
and air conditioning solutions. Midea CAC has continued with the tradition of innovation upon which it was founded, and
MCAC Shunde: 38 product lines focusing on VRF, Split Products, Heat Pump Water Heaters, and AHU/FCU.
emerged as a global leader in the HVAC industry. A strong drive for advancement has created a groundbreaking R&D
MCAC Chongqing: 14 product lines focusing on Water Cooled Centrifugal/Screw/Scroll Chillers, Air Cooled Screw/Scroll Chillers,
department that has placed Midea CAC at the forefront of a competitive field. Through these independent efforts and joint
and AHU/FCU.
cooperation with other global enterprises, Midea has supplied thousands of innovative solutions to customers worldwide.
MCAC Hefei: 11 product lines focusing on VRF, Chillers, and Heat Pump Water Heaters.
2015 JV with Carrier in China in chiller field, BOSCH in VRF production and Siix in smart control
2014 Launched the duct indoor unit with belt drive fan globally
2010 Built the 3rd manufacturing base in Hefei
2008 Launched the rooftop package ClimaMaster globally
2007 Won the first Midea centrifugal chiller project overseas
2006 Launched the first VSD centrifugal chiller
2004 Acquired MGRE entered the chiller industry
2001 Partnered with Copeland to develop the digital scroll VRF system
2000 Developed the first inverter VRF With Toshiba
1999 Entered the CAC field
Midea Company
Introduction
Midea CAC
Introduction
Introduction
Contents
Introduction
04 Introduction
06 General Features
Convenient for unit selection
Outstanding reliability
Easy to installation
Flexible choise of accessories
Mechanical specification
Midea split type air conditioners are designed and manufactured to meet the requirements of the home, office, hotel and
others public occasion use. The units are completely assembled, internally wired, charged outdoor unit with refrigerant at
the factory.
DX AHU (Air Handler Unit) Series
Application
Nominal cooling capactity
Power supply
7.0 kW
10.4 kW
14.0 kW
17.0 kW
Indoor units
(DX AHU)
220~240V,
1Ph~, 50Hz
09 DX AHU Series
Outdoor units
R410A
DX AHU (Air Handler Unit)
100% Fresh Air, DX AHU
T3
Indoor units
(DX AHU)
380~415V,
3Ph~, 50Hz
18 Conventional split A/C series
Duct Indoor Unit
Floor-standing Indoor Unit
37 Controllers
Outdoor units
Application
Nominal cooling capactity
Power supply
53.0 kW
64.0 kW
98.0 kW
Indoor units
(100% fresh air,
DX AHU)
R410A
380~415V,
3Ph~, 50Hz
Outdoor units
Notes:
1. Product’s cooling capacity as per specification.
03
04
Introduction
Contents
Introduction
04 Introduction
06 General Features
Convenient for unit selection
Outstanding reliability
Easy to installation
Flexible choise of accessories
Mechanical specification
Midea split type air conditioners are designed and manufactured to meet the requirements of the home, office, hotel and
others public occasion use. The units are completely assembled, internally wired, charged outdoor unit with refrigerant at
the factory.
DX AHU (Air Handler Unit) Series
Application
Nominal cooling capactity
Power supply
7.0 kW
10.4 kW
14.0 kW
17.0 kW
Indoor units
(DX AHU)
220~240V,
1Ph~, 50Hz
09 DX AHU Series
Outdoor units
R410A
DX AHU (Air Handler Unit)
100% Fresh Air, DX AHU
T3
Indoor units
(DX AHU)
380~415V,
3Ph~, 50Hz
18 Conventional split A/C series
Duct Indoor Unit
Floor-standing Indoor Unit
37 Controllers
Outdoor units
Application
Nominal cooling capactity
Power supply
53.0 kW
64.0 kW
98.0 kW
Indoor units
(100% fresh air,
DX AHU)
R410A
380~415V,
3Ph~, 50Hz
Outdoor units
Notes:
1. Product’s cooling capacity as per specification.
03
04
Conventional Split A/C Series
Nominal cooling capactity
76 kBtu/h
96 kBtu/h
120 kBtu/h
150 kBtu/h
General Features
Indoor units
(Duct)
Indoor units
(Floor-standing)
Convenient for unit selection
Wide cooling capacity range
380~415V,
3Ph~, 50Hz
R410A
T1
192 kBtu/h
General Features
Power supply
General Features
Application
Wide cooling capacity range. The duct type split AC is from 76,000Btu/h to 192,000Btu/h.
Long piping length
Outdoor units
Max. equivalent piping length is 50m. The outdoor unit can be installed at any ventilation locations. (Unavailable for
AHU type)
Max. height drop
between indoor
and outdoor unit
Indoor units
(Duct)
Outdoor unit up
25 m
Outdoor unit down
30 m
Max. height drop
50 m
piping length: 50m
Max. Equivalent piping length
Max. equivalent
Permitted value
Outstanding reliability
R410A
Tropical (T3)
380~415V,
3Ph~, 50Hz
Durable construction
Pre-painted exterior cabinet panels pass 1000 hours Salt Spray Test for durability.
Weather-resistant construction with capped steams and sloped top panels.
G90 galvanized heavy gauge plate conforming to ASTM-A-653.
Indoor units
(Floor-standing)
×2
Outdoor units
Notes:
1. Product’s cooling capacity as per specification.
05
06
Conventional Split A/C Series
Nominal cooling capactity
76 kBtu/h
96 kBtu/h
120 kBtu/h
150 kBtu/h
General Features
Indoor units
(Duct)
Indoor units
(Floor-standing)
Convenient for unit selection
Wide cooling capacity range
380~415V,
3Ph~, 50Hz
R410A
T1
192 kBtu/h
General Features
Power supply
General Features
Application
Wide cooling capacity range. The duct type split AC is from 76,000Btu/h to 192,000Btu/h.
Long piping length
Outdoor units
Max. equivalent piping length is 50m. The outdoor unit can be installed at any ventilation locations. (Unavailable for
AHU type)
Max. height drop
between indoor
and outdoor unit
Indoor units
(Duct)
Outdoor unit up
25 m
Outdoor unit down
30 m
Max. height drop
50 m
piping length: 50m
Max. Equivalent piping length
Max. equivalent
Permitted value
Outstanding reliability
R410A
Tropical (T3)
380~415V,
3Ph~, 50Hz
Durable construction
Pre-painted exterior cabinet panels pass 1000 hours Salt Spray Test for durability.
Weather-resistant construction with capped steams and sloped top panels.
G90 galvanized heavy gauge plate conforming to ASTM-A-653.
Indoor units
(Floor-standing)
×2
Outdoor units
Notes:
1. Product’s cooling capacity as per specification.
05
06
Flexible choise of accessories
The large split air conditioners with special anti-corrosion treatment are suitable for seaside areas or the areas exposed
to acidic substances.
General Features
Special anti-corrosion treatment of heat exchanger
provides 5 to 6 times greater resistance against acid
rain and salt corrosion.
Controllers
Wireless remote controller is available for conventional split A/C series.
Wired controller can be directly connected with duct & floor-standing indoor unts.
General Features
Customized anti-corrosion treatment
All PCB parts in the unit are coated with double-side
moisture proof paint. The outer side of electric box
metal cover is spray-painted.
All screws are anti-rust.
R51/CE
Casings of the unit and motors are anti-rust.
KJR-29B
Centralized control function can be achieved through the centralized controller as optional. MD-NIM01 should be
connected between the indoor units and centralized controller. (Only available for conventional split A/C series)
Reliable scroll compressor
Famous brand compressor: Hitachi, Danfoss, etc.
More reliable.
No complex internal suction and discharge valves for
quieter operation and higher reliability.
Compact, light-weight design, and fewer moving parts
design.
Max.64
MD-NIM01
MD-NIM01
MD-NIM01
MD-NIM01
CCM30
Multi-protection design
Multi-measurement to ensure units operate normally
and reliably:
System current protection, High/low pressure switch
protection, Temperature sensor on/off protection, etc.
Three-phase protector can be customized.
Multi-accessories
100%, Fresh air, air handler unit
Description
HP/LP switch
Standard
Temperature sensor
Easy for installation
Units are completely assembled, internally wired, charged outdoor unit with refrigerant at the factory.
The site work only needs to connect refrigerant pipes and communication wires between outdoor unit and indoor unit.
Filter
√
Wired controller
√
Thermal EXV valve
√
Sight glass
√
Drier filter
√
T1, Duct
Description
Standard
Liquid pipe
Gas pipe
Connecting cable
Filter
Outlet drainage
Tropical (T3), Duct
Optional
Standard
√
√
T1 & Tropical (T3), Floor-standing
Optional
Standard
√
√
√
Optional
√
EHK (Electric Heater Kits)
√
√
√
Three-phase protector
√
√
√
Wireless controller
√
Wired controller
Centralized controller
07
Optional
√
√
√
√
√
√
√
√
08
Flexible choise of accessories
The large split air conditioners with special anti-corrosion treatment are suitable for seaside areas or the areas exposed
to acidic substances.
General Features
Special anti-corrosion treatment of heat exchanger
provides 5 to 6 times greater resistance against acid
rain and salt corrosion.
Controllers
Wireless remote controller is available for conventional split A/C series.
Wired controller can be directly connected with duct & floor-standing indoor unts.
General Features
Customized anti-corrosion treatment
All PCB parts in the unit are coated with double-side
moisture proof paint. The outer side of electric box
metal cover is spray-painted.
All screws are anti-rust.
R51/CE
Casings of the unit and motors are anti-rust.
KJR-29B
Centralized control function can be achieved through the centralized controller as optional. MD-NIM01 should be
connected between the indoor units and centralized controller. (Only available for conventional split A/C series)
Reliable scroll compressor
Famous brand compressor: Hitachi, Danfoss, etc.
More reliable.
No complex internal suction and discharge valves for
quieter operation and higher reliability.
Compact, light-weight design, and fewer moving parts
design.
Max.64
MD-NIM01
MD-NIM01
MD-NIM01
MD-NIM01
CCM30
Multi-protection design
Multi-measurement to ensure units operate normally
and reliably:
System current protection, High/low pressure switch
protection, Temperature sensor on/off protection, etc.
Three-phase protector can be customized.
Multi-accessories
100%, Fresh air, air handler unit
Description
HP/LP switch
Standard
Temperature sensor
Easy for installation
Units are completely assembled, internally wired, charged outdoor unit with refrigerant at the factory.
The site work only needs to connect refrigerant pipes and communication wires between outdoor unit and indoor unit.
Filter
√
Wired controller
√
Thermal EXV valve
√
Sight glass
√
Drier filter
√
T1, Duct
Description
Standard
Liquid pipe
Gas pipe
Connecting cable
Filter
Outlet drainage
Tropical (T3), Duct
Optional
Standard
√
√
T1 & Tropical (T3), Floor-standing
Optional
Standard
√
√
√
Optional
√
EHK (Electric Heater Kits)
√
√
√
Three-phase protector
√
√
√
Wireless controller
√
Wired controller
Centralized controller
07
Optional
√
√
√
√
√
√
√
√
08
Casing
Unit casing is constructed of heavy gauge galvanized steel plate. Both side of the casing is waterproof and anti-corrosion coated.
Unit panel structure is allowed to maintain on one side of the unit. Service panels are removed easily and reinstalled by removing
bolts. The inside of indoor unit panels will be covered with 10mm insulation to prevent heat and noise coming out. Units are
available for forklift transportation.
Compressor
All units are equipped with direct-drive, hermetic, scroll type compressor, and it’s built-in motor is cooled with suction gas. The
voltage utilization range is ±10% of unit nameplate voltage. The compressors, incorporating a built-in muffler, are mounted on
springs within a steel housing to reduce noise. An electric heater around the compressor crankcase to ensure stability starting.
DX AHU Series
T1 Applications
T1 Applications
Mechanical specification
DX AHU (Air Handler Unit)
Heat-exchange coils
Inner-threaded copper tubes mechanically bonded to a configured hydrophilic aluminum fin is standard for the outdoor
heat-exchanger. The one which is equipped in indoor unit is standard configurated with copper tubes. All the coils are leak tested
at 4.4MPa at the factory to ensure the pressure integrity. All the indoor units are standard configurated a condensate drain pan.
Outdoor fan
The outdoor fan is multi-blade vane-axial type, made of aluminum alloy for quiet operation and durability. It is directly driven by
waterproof motor to ensure reliable continuous operations. Statically and dynamically balanced drive motor design with
maintenance-free bearing for outdoor installation.
Indoor fan
The indoor fan is forward-curved blade centrifugal fan. Impeller and casing are made of galvanized steel sheet. The high quality
ball bearings are air-sealed with preset lubricating oil. They are coated after assembly in order to provide corrosion resistance. The
fan is directly driven by a waterproof motor. The fan and motor assembly is tested and dynamic balance is implemented in the
factory.
Three-phase protector
The unit with three-phase power supply is equipped with phase sequence protector as optional. These devices protect motors
and compressors against problems caused by phase lack, phase imbalance and phase reversal indication. When the voltage is
above or below the normal range, it works and prevents unit from suffering voltage fluctuations.
DX AHU
Wired controller
KJR-23B (Optional)
Outdoor unit
Flexible installation
Flange of air flow is standard.
Dual drainage spouts for versatile installation.
Multiple airflow design: Vertical up-flow, Vertical down-flow, Horizontal left-flow and horizontal right-flow.
Air intake
Air delivery
Refrigerant
pipes
Controls
Units are completely factory-wired with necessary controls and wiring terminals for power wiring. Microprocessor controls the
cooling, heating and ventilating modes in response to signals from sensors measuring indoor and outdoor temperatures. It will
keep accurate temperature control, minimum drift from the set point and provide better building comfort.
Drainage spouts
Horizontal installation
Washable filter as optional
09
10
Casing
Unit casing is constructed of heavy gauge galvanized steel plate. Both side of the casing is waterproof and anti-corrosion coated.
Unit panel structure is allowed to maintain on one side of the unit. Service panels are removed easily and reinstalled by removing
bolts. The inside of indoor unit panels will be covered with 10mm insulation to prevent heat and noise coming out. Units are
available for forklift transportation.
Compressor
All units are equipped with direct-drive, hermetic, scroll type compressor, and it’s built-in motor is cooled with suction gas. The
voltage utilization range is ±10% of unit nameplate voltage. The compressors, incorporating a built-in muffler, are mounted on
springs within a steel housing to reduce noise. An electric heater around the compressor crankcase to ensure stability starting.
DX AHU Series
T1 Applications
T1 Applications
Mechanical specification
DX AHU (Air Handler Unit)
Heat-exchange coils
Inner-threaded copper tubes mechanically bonded to a configured hydrophilic aluminum fin is standard for the outdoor
heat-exchanger. The one which is equipped in indoor unit is standard configurated with copper tubes. All the coils are leak tested
at 4.4MPa at the factory to ensure the pressure integrity. All the indoor units are standard configurated a condensate drain pan.
Outdoor fan
The outdoor fan is multi-blade vane-axial type, made of aluminum alloy for quiet operation and durability. It is directly driven by
waterproof motor to ensure reliable continuous operations. Statically and dynamically balanced drive motor design with
maintenance-free bearing for outdoor installation.
Indoor fan
The indoor fan is forward-curved blade centrifugal fan. Impeller and casing are made of galvanized steel sheet. The high quality
ball bearings are air-sealed with preset lubricating oil. They are coated after assembly in order to provide corrosion resistance. The
fan is directly driven by a waterproof motor. The fan and motor assembly is tested and dynamic balance is implemented in the
factory.
Three-phase protector
The unit with three-phase power supply is equipped with phase sequence protector as optional. These devices protect motors
and compressors against problems caused by phase lack, phase imbalance and phase reversal indication. When the voltage is
above or below the normal range, it works and prevents unit from suffering voltage fluctuations.
DX AHU
Wired controller
KJR-23B (Optional)
Outdoor unit
Flexible installation
Flange of air flow is standard.
Dual drainage spouts for versatile installation.
Multiple airflow design: Vertical up-flow, Vertical down-flow, Horizontal left-flow and horizontal right-flow.
Air intake
Air delivery
Refrigerant
pipes
Controls
Units are completely factory-wired with necessary controls and wiring terminals for power wiring. Microprocessor controls the
cooling, heating and ventilating modes in response to signals from sensors measuring indoor and outdoor temperatures. It will
keep accurate temperature control, minimum drift from the set point and provide better building comfort.
Drainage spouts
Horizontal installation
Washable filter as optional
09
10
Specifications
Dimensions
Tropical (T3) application, DX AHU - Indoor unit
T3 application, DX AHU - Indoor unit
MVA-24CWN1-13
MVA-36CWN1-13
MVA-48CWN1-13
MVA-60CWN1-13
MOVTA-24CN1-13C
MOVTA-36CN1-(R)13C
MOVTA-48CN1-R13C
MOVTA-60CN1-R13C
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
24,000 / 20,400
36,000 / 30,400
48,000 / 40,500
58,000 / 49,000
kW
7.0
10.4
14.0
17.0
13
13
13
13
CFM
920
1,470
1,900
2,010
T1 Applications
Outdoor unit model
Indoor unit power supply
Capacity (T1/T3)
Capacity (T1)
Cooling
SEER (T1)
Air flow (Hi)
Pa
45
60
70
75
Max. external static pressure (Hi)
Pa
150
150
150
150
dB(A)
49
55
57
59
Centrifugal / Direct
Centrifugal / Direct
Centrifugal / Direct
Centrifugal / Direct
Fan type / Drive type
Coil
262mm
W
A
Standard external static pressure (Hi)
Noise level (Hi)
Flanges are provided
for field installation
High voltage connection
Breaker switch
(For electric heater only)
Copper tube and aluminum fin
Controller
mm
406×262
457×262
495×262
495×262
mm
460×1,050×520
500×1,180×550
560×1,385×610
560×1,385×610
Packing (W×H×D)
mm
534×1,104×580
573×1,234×610
634×1,438×670
634×1,438×670
kg
50 / 56
64 / 70
78 / 85
78 / 85
Net / Gross weight
H
KJR-23B (Optional)
Net (W×H×D)
Supply duct dimension (W×D)
Dimension
KJR-23B (Optional)
KJR-23B (Optional)
KJR-23B (Optional)
(Unit: mm)
Vapor line connection copper
Liquid line connection copper
Auxiliary drain connection
Tropical (T3) application, DX AHU - Outdoor unit
Outdoor unit model
MOVTA-24CN1-13C
Outdoor unit power supply
Max. power input (Outdoor unit)
Noise level
Compressor
MOVTA-60CN1-R13C
380~415V, 3Ph~, 50Hz
W
2,650
3,950
4,050
5,950
62
64
64
68
68
Scroll
Scroll
Scroll
Scroll
Scroll
Quantity
Air flow
MOVTA-48CN1-R13C
dB(A)
Type
Charged
MOVTA-36CN1-R13C
220~240V, 1Ph~, 50Hz
Type
Refrigerant
MOVTA-36CN1-13C
kg
CFM
Fan type / Drive type
6,800
1
1
1
1
1
R410A
R410A
R410A
R410A
R410A
2.52
3.57
3.62
3.92
4.32
1,766
3,000
3,000
3,396
4,031
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
Coil
Auxiliary drain connection
mm
Φ9.52 / Φ19
Φ9.52 / Φ19
Φ9.52 / Φ19
Φ9.52 / Φ22
Ambient temperature
°C
17~52
17~52
17~52
17~52
17~52
Body (W×H×D)
mm
600×633×600
710×759×710
710×759×710
710×843×710
740×843×740
Packing (W×H×D)
W
D
A
MVA-24CWN1-13
1,050
460
520
406
MVA-36CWN1-13
1,180
500
550
456
MVA-48CWN1-13
1,385
560
610
496
MVA-60CWN1-13
1,385
560
610
496
T3 application, DX AHU - Outdoor unit
768×877×768
Φ9.52 / Φ22
mm
628×667×628
738×793×738
738×793×738
738×877×738
Net
kg
59
86
81
89
98
Gross
kg
62
90
85
93
102
L
Air inlets
Louvered panels
Notes:
1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. The standard external static pressure and air flow is based on cooling performance without filter in place.
H
W
Refrigerant piping size
Weight
D
Primary drain connection
Copper tube and aluminum fin
Dimension
Tropical (T3) Application
Indoor unit model
Service access
H
(Unit: mm)
L
W
H
MOVTA-24CN1-13C
600
600
633
MOVTA-36CN1-13C
710
710
759
MOVTA-36CN1-R13C
710
710
759
MOVTA-48CN1-R13C
710
710
843
MOVTA-60CN1-R13C
740
740
843
4. Specifications are subject to change without prior notice for product improvement.
11
12
Specifications
Dimensions
Tropical (T3) application, DX AHU - Indoor unit
T3 application, DX AHU - Indoor unit
MVA-24CWN1-13
MVA-36CWN1-13
MVA-48CWN1-13
MVA-60CWN1-13
MOVTA-24CN1-13C
MOVTA-36CN1-(R)13C
MOVTA-48CN1-R13C
MOVTA-60CN1-R13C
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
24,000 / 20,400
36,000 / 30,400
48,000 / 40,500
58,000 / 49,000
kW
7.0
10.4
14.0
17.0
13
13
13
13
CFM
920
1,470
1,900
2,010
T1 Applications
Outdoor unit model
Indoor unit power supply
Capacity (T1/T3)
Capacity (T1)
Cooling
SEER (T1)
Air flow (Hi)
Pa
45
60
70
75
Max. external static pressure (Hi)
Pa
150
150
150
150
dB(A)
49
55
57
59
Centrifugal / Direct
Centrifugal / Direct
Centrifugal / Direct
Centrifugal / Direct
Fan type / Drive type
Coil
262mm
W
A
Standard external static pressure (Hi)
Noise level (Hi)
Flanges are provided
for field installation
High voltage connection
Breaker switch
(For electric heater only)
Copper tube and aluminum fin
Controller
mm
406×262
457×262
495×262
495×262
mm
460×1,050×520
500×1,180×550
560×1,385×610
560×1,385×610
Packing (W×H×D)
mm
534×1,104×580
573×1,234×610
634×1,438×670
634×1,438×670
kg
50 / 56
64 / 70
78 / 85
78 / 85
Net / Gross weight
H
KJR-23B (Optional)
Net (W×H×D)
Supply duct dimension (W×D)
Dimension
KJR-23B (Optional)
KJR-23B (Optional)
KJR-23B (Optional)
(Unit: mm)
Vapor line connection copper
Liquid line connection copper
Auxiliary drain connection
Tropical (T3) application, DX AHU - Outdoor unit
Outdoor unit model
MOVTA-24CN1-13C
Outdoor unit power supply
Max. power input (Outdoor unit)
Noise level
Compressor
MOVTA-60CN1-R13C
380~415V, 3Ph~, 50Hz
W
2,650
3,950
4,050
5,950
62
64
64
68
68
Scroll
Scroll
Scroll
Scroll
Scroll
Quantity
Air flow
MOVTA-48CN1-R13C
dB(A)
Type
Charged
MOVTA-36CN1-R13C
220~240V, 1Ph~, 50Hz
Type
Refrigerant
MOVTA-36CN1-13C
kg
CFM
Fan type / Drive type
6,800
1
1
1
1
1
R410A
R410A
R410A
R410A
R410A
2.52
3.57
3.62
3.92
4.32
1,766
3,000
3,000
3,396
4,031
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
Coil
Auxiliary drain connection
mm
Φ9.52 / Φ19
Φ9.52 / Φ19
Φ9.52 / Φ19
Φ9.52 / Φ22
Ambient temperature
°C
17~52
17~52
17~52
17~52
17~52
Body (W×H×D)
mm
600×633×600
710×759×710
710×759×710
710×843×710
740×843×740
Packing (W×H×D)
W
D
A
MVA-24CWN1-13
1,050
460
520
406
MVA-36CWN1-13
1,180
500
550
456
MVA-48CWN1-13
1,385
560
610
496
MVA-60CWN1-13
1,385
560
610
496
T3 application, DX AHU - Outdoor unit
768×877×768
Φ9.52 / Φ22
mm
628×667×628
738×793×738
738×793×738
738×877×738
Net
kg
59
86
81
89
98
Gross
kg
62
90
85
93
102
L
Air inlets
Louvered panels
Notes:
1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. The standard external static pressure and air flow is based on cooling performance without filter in place.
H
W
Refrigerant piping size
Weight
D
Primary drain connection
Copper tube and aluminum fin
Dimension
Tropical (T3) Application
Indoor unit model
Service access
H
(Unit: mm)
L
W
H
MOVTA-24CN1-13C
600
600
633
MOVTA-36CN1-13C
710
710
759
MOVTA-36CN1-R13C
710
710
759
MOVTA-48CN1-R13C
710
710
843
MOVTA-60CN1-R13C
740
740
843
4. Specifications are subject to change without prior notice for product improvement.
11
12
100% Fresh Air, DX AHU
Specifications
Tropical (T3) application, 100% fresh air, DX AHU - Indoor unit
Outdoor unit model
Installation kits (Optional)
Tropical (T3) Application
Outdoor unit
Wired controller
KJR-10C/MC-E (Standard)
MKXT105D/RN1
MKXT53D/RN1(C)
MKXT70D/RN1(C)
58,000
MKXT105D/RN1(C)
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
49.82
60.16
92.12
Capacity (T3)
kW
53.00
64.00
98.00
Input (T3)
kW
23.70
29.00
37.00
2.24
2.21
2.65
Indoor air flow
m3/h
5,000 (@100Pa)
6,000 (@100Pa)
9,000 (@100Pa)
Indoor air flow range
m3/h
3,900~5,100
5,300~6,800
8,500~10,700
Pa
50~220
50~150
0~150
Centrifugal / Belt
Centrifugal / Belt
External static pressure range
Centrifugal / Belt
Coil
Copper tube and aluminum fin
KJR-10C/MC-E
Wired controller
Fresh air delivery
Dimension
KJR-10C/MC-E
KJR-10C/MC-E
mm
Φ48
Φ48
Φ48
Net (W×H×D)
mm
2,460×1,030×1,080
2,560×1,030×1,380
2,560×1,030×1,980
Packing (W×H×D)
mm
2,560×1,260×1,280
2,740×1,280×1,650
2,700×1,100×2,000
kg
300 / 500
380 / 600
500 / 740
Drainage pipe size (OD)
Fresh air intake
MKZX0918AWY/RN1
380~415V, 3Ph~, 50Hz
Fan type / Drive type
Tropical (T3) 100% fresh air & DX AHU
MKXT70D/RN1
kW
EER (T3)
100% fresh air, air handle unit
MKZX0912AWY/RN1
MKXT53D/RN1
Capacity (T1)
Indoor unit power supply
Cooling
MKZX0909AWY/RN1
Net / Gross weight
Tropical (T3) application, 100% fresh air, DX AHU - Outdoor unit
Outdoor unit model
MKXT53D/RN1
MKXT70D/RN1
MKXT105D/RN1
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
380V, 3Ph~, 60Hz
kW
28.0
33.0
45.55
A
50.7
60.0
84.3
Scroll / 2
Scroll / 2
Scroll / 2
Outdoor unit power supply
Max. power input (Whole units)
Built-in filters as standard
Built-in two filters, standard for grade G2 and G3.
Other grade filter can be customized.
The section of bag filter can be customized.
Max. current (Whole units)
Compressor (Type / Quantity)
Refrigerant
Type
Charged
Fan type / Drive type
Change the speed of a rotating shaft member, so it will increase or decrease the revolutions per minute of that particular
shaft to adjust air flow as required.
Double skin panel structure
Double skin panel is filled with injected polyurethane foam insulation. The outer skin is anti-corrosion color-coated steel
sheet with a layer of film. The inner skin is galvaized steel sheet.
25mm panel thickness as standard, 35mm and 50mm are optional.
R410A
R410A
8.5kg+8.5kg
9.0kg+9.0kg
Axial / Direct
Axial / Direct
Axial / Direct
Coil
Copper tube and aluminum fin
Refrigerant piping size (×Quantity)
Ambient temperature
Variable speed pulley design
R410A
5.5kg+5.5kg
Dimension
mm
Φ12.7 / Φ25 (×2)
Φ12.7 / Φ25 (×2)
Φ12.7 / Φ25 (×2)
°C
15~52
15~52
15~52
Body (W×H×D)
mm
1,825×1,245×899
2,158×1,260×1,082
2,158×1,670×1,082
Packing (W×H×D)
mm
1,844×1,272×924
2,168×1,275×1,105
2,168×1,686×1,105
kg
403 / 415
508 / 523
570 / 582
MKXT105D/RN1(C)
Net / Gross weight
Tropical (T3) application, 100% fresh air, DX AHU - Installation kits (Optional)
Installation kits (Optional)
MKXT53D/RN1(C)
MKXT70D/RN1(C)
Drier filter (×Quantity)
DML 305 FS (×2)
DML 305 FS (×2)
DML 305 FS (×2)
TGEL9 067N3176 (×2)
TGEL13 067N3177 (×2)
TGEL15 067N3159 (×2)
SGP 12sN (×2)
SGP 12sN (×2)
SGP 12sN (×2)
mm
300×230×260
300×230×260
300×230×260
kg
4.9/5.4
4.9/5.4
4.9/5.4
Thermal EXP valve (×Quantity)
Sight glass (×Quantity)
Packing dimension (W×H×D)
Net / Gross weight
Notes:
1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C DB, 20°C WB, indoor temperature 35°C DB / 20°C WB;
2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C DB, 26°C WB, indoor temperature 46°C DB / 26°C WB;
3. Specifications are subject to change without prior notice for product improvement.
13
14
Tropical (T3) Application
Indoor unit model
100% Fresh Air, DX AHU
Specifications
Tropical (T3) application, 100% fresh air, DX AHU - Indoor unit
Outdoor unit model
Installation kits (Optional)
Tropical (T3) Application
Outdoor unit
Wired controller
KJR-10C/MC-E (Standard)
MKXT105D/RN1
MKXT53D/RN1(C)
MKXT70D/RN1(C)
58,000
MKXT105D/RN1(C)
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
49.82
60.16
92.12
Capacity (T3)
kW
53.00
64.00
98.00
Input (T3)
kW
23.70
29.00
37.00
2.24
2.21
2.65
Indoor air flow
m3/h
5,000 (@100Pa)
6,000 (@100Pa)
9,000 (@100Pa)
Indoor air flow range
m3/h
3,900~5,100
5,300~6,800
8,500~10,700
Pa
50~220
50~150
0~150
Centrifugal / Belt
Centrifugal / Belt
External static pressure range
Centrifugal / Belt
Coil
Copper tube and aluminum fin
KJR-10C/MC-E
Wired controller
Fresh air delivery
Dimension
KJR-10C/MC-E
KJR-10C/MC-E
mm
Φ48
Φ48
Φ48
Net (W×H×D)
mm
2,460×1,030×1,080
2,560×1,030×1,380
2,560×1,030×1,980
Packing (W×H×D)
mm
2,560×1,260×1,280
2,740×1,280×1,650
2,700×1,100×2,000
kg
300 / 500
380 / 600
500 / 740
Drainage pipe size (OD)
Fresh air intake
MKZX0918AWY/RN1
380~415V, 3Ph~, 50Hz
Fan type / Drive type
Tropical (T3) 100% fresh air & DX AHU
MKXT70D/RN1
kW
EER (T3)
100% fresh air, air handle unit
MKZX0912AWY/RN1
MKXT53D/RN1
Capacity (T1)
Indoor unit power supply
Cooling
MKZX0909AWY/RN1
Net / Gross weight
Tropical (T3) application, 100% fresh air, DX AHU - Outdoor unit
Outdoor unit model
MKXT53D/RN1
MKXT70D/RN1
MKXT105D/RN1
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
380V, 3Ph~, 60Hz
kW
28.0
33.0
45.55
A
50.7
60.0
84.3
Scroll / 2
Scroll / 2
Scroll / 2
Outdoor unit power supply
Max. power input (Whole units)
Built-in filters as standard
Built-in two filters, standard for grade G2 and G3.
Other grade filter can be customized.
The section of bag filter can be customized.
Max. current (Whole units)
Compressor (Type / Quantity)
Refrigerant
Type
Charged
Fan type / Drive type
Change the speed of a rotating shaft member, so it will increase or decrease the revolutions per minute of that particular
shaft to adjust air flow as required.
Double skin panel structure
Double skin panel is filled with injected polyurethane foam insulation. The outer skin is anti-corrosion color-coated steel
sheet with a layer of film. The inner skin is galvaized steel sheet.
25mm panel thickness as standard, 35mm and 50mm are optional.
R410A
R410A
8.5kg+8.5kg
9.0kg+9.0kg
Axial / Direct
Axial / Direct
Axial / Direct
Coil
Copper tube and aluminum fin
Refrigerant piping size (×Quantity)
Ambient temperature
Variable speed pulley design
R410A
5.5kg+5.5kg
Dimension
mm
Φ12.7 / Φ25 (×2)
Φ12.7 / Φ25 (×2)
Φ12.7 / Φ25 (×2)
°C
15~52
15~52
15~52
Body (W×H×D)
mm
1,825×1,245×899
2,158×1,260×1,082
2,158×1,670×1,082
Packing (W×H×D)
mm
1,844×1,272×924
2,168×1,275×1,105
2,168×1,686×1,105
kg
403 / 415
508 / 523
570 / 582
MKXT105D/RN1(C)
Net / Gross weight
Tropical (T3) application, 100% fresh air, DX AHU - Installation kits (Optional)
Installation kits (Optional)
MKXT53D/RN1(C)
MKXT70D/RN1(C)
Drier filter (×Quantity)
DML 305 FS (×2)
DML 305 FS (×2)
DML 305 FS (×2)
TGEL9 067N3176 (×2)
TGEL13 067N3177 (×2)
TGEL15 067N3159 (×2)
SGP 12sN (×2)
SGP 12sN (×2)
SGP 12sN (×2)
mm
300×230×260
300×230×260
300×230×260
kg
4.9/5.4
4.9/5.4
4.9/5.4
Thermal EXP valve (×Quantity)
Sight glass (×Quantity)
Packing dimension (W×H×D)
Net / Gross weight
Notes:
1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C DB, 20°C WB, indoor temperature 35°C DB / 20°C WB;
2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C DB, 26°C WB, indoor temperature 46°C DB / 26°C WB;
3. Specifications are subject to change without prior notice for product improvement.
13
14
Tropical (T3) Application
Indoor unit model
Dimensions
T3 application, 100% fresh air, AHU
Indoor unit: MKZX0909AWY/RN1
(Units: mm)
T3 application, 100% fresh air, AHU
Indoor unit: MKZX0912AWY/RN1
(Units: mm)
2,200
2,300
530(W)*530(H)
830(W)*530(H)
84.5
404
474
1,030
950
80
54.5
142.5
406.5
406.5
431
159
2,460
474
170
868
826
404
Part A
147.5
141.5 406.5
53
146.5
406.5
950
Part A
361
361
1,030
Tropical (T3) Application
84
Tropical (T3) Application
431
2,560
3,160
3,060
1,380
1,080
950
1,250
880
830
Air intake side without part A
Air intake side with part A
T3 application, 100% fresh air, AHU
Outdoor unit: MKXT53D/RN1
(Units: mm)
530
580
530
580
580
529
Air intake side without part A
Air intake side with part A
T3 application, 100% fresh air, AHU
Outdoor unit: MKXT70D/RN1
(Units: mm)
1,825
82
1,0
2,1
58
899
1,260
1,245
15
16
Dimensions
T3 application, 100% fresh air, AHU
Indoor unit: MKZX0909AWY/RN1
(Units: mm)
T3 application, 100% fresh air, AHU
Indoor unit: MKZX0912AWY/RN1
(Units: mm)
2,200
2,300
530(W)*530(H)
830(W)*530(H)
84.5
404
474
1,030
950
80
54.5
142.5
406.5
406.5
431
159
2,460
474
170
868
826
404
Part A
147.5
141.5 406.5
53
146.5
406.5
950
Part A
361
361
1,030
Tropical (T3) Application
84
Tropical (T3) Application
431
2,560
3,160
3,060
1,380
1,080
950
1,250
880
830
Air intake side without part A
Air intake side with part A
T3 application, 100% fresh air, AHU
Outdoor unit: MKXT53D/RN1
(Units: mm)
530
580
530
580
580
529
Air intake side without part A
Air intake side with part A
T3 application, 100% fresh air, AHU
Outdoor unit: MKXT70D/RN1
(Units: mm)
1,825
82
1,0
2,1
58
899
1,260
1,245
15
16
T3 application, 100% fresh air, AHU
Indoor unit: MKZX0918AWY/RN1
(Units: mm)
523
453
2,300
1630(W)*830(H)
Conventional split A/C series
Tropical (T3) Application
453
1,030
950
64
154 406
163 406
Tropical (T3) Application
523
84
Part A
Duct Indoor Unit
159
841
2,560
3,160
1,980
1,850
1,680
1,630
Compact design. Concealed installation without floor space requirement.
Hidden in the ceiling, unit installation is not hindered by the location of lighting
fixtures or room structure.
Air inlet & outlet flange are standard for easy duct connection.
Easy maintenance through the inspection port.
830
880
Convenient installation
Air intake side without part A
Air intake side with part A
Free air duct design
T3 application, 100% fresh air, AHU
Outdoor unit: MKXT105D/RN1
(Units: mm)
2
2,1
58
1,670
1,08
Multi diffusers from one indoor unit, air-conditioned multi rooms at the same time.
Three speeds of air supply can be chosen via controller.
The indoor unit is suitable for various applications where there are many rooms or halls, such as restaurant, concert halls and
hotels.
Flexible duct design for different room styles.
17
Auto Restart
Function
Auto
Defrosting
Independent
Dehumidification
PTC Heater
Anti-Cold
Air Function
Wired
Controller
Timer
18
T3 application, 100% fresh air, AHU
Indoor unit: MKZX0918AWY/RN1
(Units: mm)
523
453
2,300
1630(W)*830(H)
Conventional split A/C series
Tropical (T3) Application
453
1,030
950
64
154 406
163 406
Tropical (T3) Application
523
84
Part A
Duct Indoor Unit
159
841
2,560
3,160
1,980
1,850
1,680
1,630
Compact design. Concealed installation without floor space requirement.
Hidden in the ceiling, unit installation is not hindered by the location of lighting
fixtures or room structure.
Air inlet & outlet flange are standard for easy duct connection.
Easy maintenance through the inspection port.
830
880
Convenient installation
Air intake side without part A
Air intake side with part A
Free air duct design
T3 application, 100% fresh air, AHU
Outdoor unit: MKXT105D/RN1
(Units: mm)
2
2,1
58
1,670
1,08
Multi diffusers from one indoor unit, air-conditioned multi rooms at the same time.
Three speeds of air supply can be chosen via controller.
The indoor unit is suitable for various applications where there are many rooms or halls, such as restaurant, concert halls and
hotels.
Flexible duct design for different room styles.
17
Auto Restart
Function
Auto
Defrosting
Independent
Dehumidification
PTC Heater
Anti-Cold
Air Function
Wired
Controller
Timer
18
Specifications - T1 Application
Heat pump, medium static pressure duct
MOV-76HN1-R
MOV-96HN1-R
Indoor unit model
Outdoor unit model / Quantity
MTB-76HWN1
MTB-96HWN1
MTB-120HWN1
MOV-76HN1-R / 1
MOV-96HN1-R / 1
MOV-120HN1-R / 1
Indoor unit power supply
Capacity
Cooling
Input
EER
Capacity
220~240V, 1Ph~, 50Hz
Outdoor unit model
Outdoor unit power supply
Max. power input
kW
Max. current
A
19.3
23.7
28.6
dB(A)
68
68
69
14.4
17.3
kW
22.3
28.1
35.0
kW
7.5
9.6
11.9
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.97
2.93
2.94
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 5.5kg
R410A / 7.5kg
Btu/h
85,300
106,000
129,700
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
31.1
38.0
Coil
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Φ12.7 (Liquid), Φ28.6 (Gas)
Noise level
8.3
10.3
12.7
Refrigerant piping size
COP
W/W
3.01
3.02
2.99
Ambient temperature
Max. power input
W
1,300
1,400
2,000
Max. current
A
5.2
5.8
9.0
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
6,375 (3,750CFM)
Pa
100
100
100
dB(A)
56
56
63
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Dimension
mm
°C
17~46
17~46
17~46
Body (W×H×D)
mm
1,260×908×700
1,260×908×700
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
187 / 204
201 / 217
Net / Gross weight
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
Wired controller (KJR-29B1/BK-E)
Net (W×H×D)
mm
1,452×462×797
1,452×462×797
1,452×462×797
Packing (W×H×D)
mm
1,555×500×875
1,555×500×875
1,555×500×875
kg
94 / 106
96 / 108
97 / 109
Net / Gross weight
11.7
120,000
kW
Dimension
MOV-120HN1-R
380~415V, 3Ph~, 50Hz
96,000
kW
Noise level (Hi)
MOV-96HN1-R
380~415V, 3Ph~, 50Hz
76,000
Input
Standard external static pressure
MOV-76HN1-R
380~415V, 3Ph~, 50Hz
Btu/h
25.0
Heating
MOV-120HN1-R
3. Specifications are subject to change without prior notice for product improvement.
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
19
20
Tropical (T3) Application
Tropical (T3) Application
MTB-76HWN1
MTB-96HWN1
MTB-120HWN1
Specifications - T1 Application
Heat pump, medium static pressure duct
MOV-76HN1-R
MOV-96HN1-R
Indoor unit model
Outdoor unit model / Quantity
MTB-76HWN1
MTB-96HWN1
MTB-120HWN1
MOV-76HN1-R / 1
MOV-96HN1-R / 1
MOV-120HN1-R / 1
Indoor unit power supply
Capacity
Cooling
Input
EER
Capacity
220~240V, 1Ph~, 50Hz
Outdoor unit model
Outdoor unit power supply
Max. power input
kW
Max. current
A
19.3
23.7
28.6
dB(A)
68
68
69
14.4
17.3
kW
22.3
28.1
35.0
kW
7.5
9.6
11.9
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.97
2.93
2.94
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 5.5kg
R410A / 7.5kg
Btu/h
85,300
106,000
129,700
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
31.1
38.0
Coil
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Φ12.7 (Liquid), Φ28.6 (Gas)
Noise level
8.3
10.3
12.7
Refrigerant piping size
COP
W/W
3.01
3.02
2.99
Ambient temperature
Max. power input
W
1,300
1,400
2,000
Max. current
A
5.2
5.8
9.0
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
6,375 (3,750CFM)
Pa
100
100
100
dB(A)
56
56
63
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Dimension
mm
°C
17~46
17~46
17~46
Body (W×H×D)
mm
1,260×908×700
1,260×908×700
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
187 / 204
201 / 217
Net / Gross weight
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
Wired controller (KJR-29B1/BK-E)
Net (W×H×D)
mm
1,452×462×797
1,452×462×797
1,452×462×797
Packing (W×H×D)
mm
1,555×500×875
1,555×500×875
1,555×500×875
kg
94 / 106
96 / 108
97 / 109
Net / Gross weight
11.7
120,000
kW
Dimension
MOV-120HN1-R
380~415V, 3Ph~, 50Hz
96,000
kW
Noise level (Hi)
MOV-96HN1-R
380~415V, 3Ph~, 50Hz
76,000
Input
Standard external static pressure
MOV-76HN1-R
380~415V, 3Ph~, 50Hz
Btu/h
25.0
Heating
MOV-120HN1-R
3. Specifications are subject to change without prior notice for product improvement.
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
19
20
Tropical (T3) Application
Tropical (T3) Application
MTB-76HWN1
MTB-96HWN1
MTB-120HWN1
Specifications - T1 Application
MHB-76HWN1
MHB-96HWN1
Indoor unit model
Outdoor unit model / Quantity
MHA-150HWN1
MHA-192HWN1
MHB-76HWN1
MHB-96HWN1
MHA-150HWN1
MHA-192HWN1
MOV-76HN1-R / 1
MOV-96HN1-R / 1
MOV-150HN1-R / 1
MOV-192HN1-R / 1
Indoor unit power supply
Capacity
Cooling
Input
EER
Capacity
MOV-76HN1-R
MOV-96HN1-R
220~240V, 1Ph~, 50Hz
Outdoor unit model
Max. power input
kW
11.7
14.4
26.9
32.2
A
19.3
23.7
47.9
53.8
dB(A)
68
68
70
73
150,100
192,000
kW
22.3
28.1
44.0
56.3
kW
7.5
9.6
16.3
22.0
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 3
Scroll / 3
W/W
2.97
2.93
2.70
2.56
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 5.5kg
R410A / 10.0kg
R410A / 11.8kg
Btu/h
85,300
106,000
160,300
200,000
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
31.0
47.0
58.6
Coil
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Max. current
Noise level
8.3
10.3
15.7
19.3
Refrigerant piping size
COP
W/W
3.01
3.02
2.99
3.04
Ambient temperature
Max. power input
W
1,300
1,400
2,730
4,690
Max. current
A
5.2
5.8
12.1
20.9
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
8,500 (5,000CFM)
10,800 (6,350CFM)
Pa
196
196
196
196
dB(A)
56
56
63
65
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Dimension
Copper tube and aluminum fin
mm
Φ16 (Liquid), Φ32 (Gas)
Φ16 (Liquid), Φ32 (Gas)
°C
17~46
17~46
17~46
17~46
Body (W×H×D)
mm
1,260×908×700
1,260×908×700
1,250×1,615×765
1,390×1,615×765
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,305×1,790×820
1,455×1,790×830
kg
174 / 193
187 / 204
288 / 308
320 / 336
Net / Gross weight
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
Wired controller (KJR-29B1/BK-E)
Net (W×H×D)
mm
1,452×462×797
1,452×462×797
1,988×669×906
1,988×669×906
Packing (W×H×D)
mm
1,555×500×875
1,555×500×875
2,095×800×964
2,095×800×964
kg
94 / 106
96 / 108
208 / 220
215 / 230
Net / Gross weight
MOV-192HN1-R
96,000
kW
Dimension
MOV-150HN1-R
380~415V, 3Ph~, 50Hz
76,000
kW
Noise level (Hi)
MOV-96HN1-R
Btu/h
Input
Standard external static pressure
MOV-76HN1-R
MOV-192HN1-R
Outdoor unit power supply
25.0
Heating
MOV-150HN1-R
3. Specifications are subject to change without prior notice for product improvement.
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
21
22
Tropical (T3) Application
Tropical (T3) Application
Heat pump, high static pressure duct
Specifications - T1 Application
MHB-76HWN1
MHB-96HWN1
Indoor unit model
Outdoor unit model / Quantity
MHA-150HWN1
MHA-192HWN1
MHB-76HWN1
MHB-96HWN1
MHA-150HWN1
MHA-192HWN1
MOV-76HN1-R / 1
MOV-96HN1-R / 1
MOV-150HN1-R / 1
MOV-192HN1-R / 1
Indoor unit power supply
Capacity
Cooling
Input
EER
Capacity
MOV-76HN1-R
MOV-96HN1-R
220~240V, 1Ph~, 50Hz
Outdoor unit model
Max. power input
kW
11.7
14.4
26.9
32.2
A
19.3
23.7
47.9
53.8
dB(A)
68
68
70
73
150,100
192,000
kW
22.3
28.1
44.0
56.3
kW
7.5
9.6
16.3
22.0
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 3
Scroll / 3
W/W
2.97
2.93
2.70
2.56
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 5.5kg
R410A / 10.0kg
R410A / 11.8kg
Btu/h
85,300
106,000
160,300
200,000
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
31.0
47.0
58.6
Coil
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Max. current
Noise level
8.3
10.3
15.7
19.3
Refrigerant piping size
COP
W/W
3.01
3.02
2.99
3.04
Ambient temperature
Max. power input
W
1,300
1,400
2,730
4,690
Max. current
A
5.2
5.8
12.1
20.9
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
8,500 (5,000CFM)
10,800 (6,350CFM)
Pa
196
196
196
196
dB(A)
56
56
63
65
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Dimension
Copper tube and aluminum fin
mm
Φ16 (Liquid), Φ32 (Gas)
Φ16 (Liquid), Φ32 (Gas)
°C
17~46
17~46
17~46
17~46
Body (W×H×D)
mm
1,260×908×700
1,260×908×700
1,250×1,615×765
1,390×1,615×765
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,305×1,790×820
1,455×1,790×830
kg
174 / 193
187 / 204
288 / 308
320 / 336
Net / Gross weight
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
Wired controller (KJR-29B1/BK-E)
Net (W×H×D)
mm
1,452×462×797
1,452×462×797
1,988×669×906
1,988×669×906
Packing (W×H×D)
mm
1,555×500×875
1,555×500×875
2,095×800×964
2,095×800×964
kg
94 / 106
96 / 108
208 / 220
215 / 230
Net / Gross weight
MOV-192HN1-R
96,000
kW
Dimension
MOV-150HN1-R
380~415V, 3Ph~, 50Hz
76,000
kW
Noise level (Hi)
MOV-96HN1-R
Btu/h
Input
Standard external static pressure
MOV-76HN1-R
MOV-192HN1-R
Outdoor unit power supply
25.0
Heating
MOV-150HN1-R
3. Specifications are subject to change without prior notice for product improvement.
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
21
22
Tropical (T3) Application
Tropical (T3) Application
Heat pump, high static pressure duct
Specifications - Tropical (T3) Application
Heat pump, medium static pressure duct
MTB1T-96HWN1
Indoor unit model
Outdoor unit model / Quantity
MTA-76HRN1
MTB1T-96HWN1
MTA-120HRN1
MOV-76HN1-C / 1
MOVTA-96HN1-R / 1
MOV-120HN1-C / 1
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
Controllers
EER (T1)
Capacity
MOV-76HN1-C
MOVTA-96HN1-R
MTA-120HRN1
220~240V, 1Ph~, 50Hz
Outdoor unit model
Outdoor unit power supply
Max. power input
kW
11.7 (Whole units)
14.4 (ODU)
17.3 (Whole units)
Max. current
A
19.3 (Whole units)
23.7 (ODU)
28.6 (Whole units)
dB(A)
65
68
69
119,400 / 102,400
kW
22.0 / 18.8
28.1 / 25.75
35.0 / 30.0
kW
7.5 / 8.85
9.6 / 15.00
12.0 / 13.25
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.93
2.93
2.92
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 7.2kg
Btu/h
85,000
106,000
130,000
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
31.1
38.0
Coil
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Φ12.7 (Liquid), Φ28.6 (Gas)
Noise level
kW
8.3
10.3
12.6
Refrigerant piping size
COP
W/W
3.01
3.02
3.02
Ambient temperature
Max. power input
W
11,700 (Whole units)
1,400 (IDU)
17,300 (Whole units)
Max. current
A
19.3 (Whole units)
5.8 (IDU)
28.6 (Whole units)
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
6,375 (3,750CFM)
Pa
100
100
150
dB(A)
58
56
63
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Wireless controller (R51/E)
Wired controller (KJR-29B)
°C
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
177 / 192
201 / 217
Net / Gross weight
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
Wireless controller (R51/E)
Net (W×H×D)
mm
1,443×450×846
1452×462×797
1,988×669×906
Packing (W×H×D)
mm
1,549×476×917
1,555×500×875
2,095×800×964
kg
105 / 120
97 / 109
188 / 220
Net / Gross weight
Dimension
mm
unit is 7.5m.
Copper tube and aluminum fin
Dimension
MOV-120HN1-C
380~415V, 3Ph~, 50Hz
96,000 / 87,860
kW
Noise level (Hi)
MOVTA-96HN1-R
380~415V, 3Ph~, 50Hz
75,100 / 64,100
Input
Standard external static pressure
MOV-76HN1-C
380~415V, 3Ph~, 50Hz
Btu/h
25.0
Heating
MOV-120HN1-C
unit is 7.5m.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
4. Specifications are subject to change without prior notice for product improvement.
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
4. Specifications are subject to change without prior notice for product improvement.
23
24
Controllers
MTA-76HRN1
Specifications - Tropical (T3) Application
Heat pump, medium static pressure duct
MTB1T-96HWN1
Indoor unit model
Outdoor unit model / Quantity
MTA-76HRN1
MTB1T-96HWN1
MTA-120HRN1
MOV-76HN1-C / 1
MOVTA-96HN1-R / 1
MOV-120HN1-C / 1
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
Controllers
EER (T1)
Capacity
MOV-76HN1-C
MOVTA-96HN1-R
MTA-120HRN1
220~240V, 1Ph~, 50Hz
Outdoor unit model
Outdoor unit power supply
Max. power input
kW
11.7 (Whole units)
14.4 (ODU)
17.3 (Whole units)
Max. current
A
19.3 (Whole units)
23.7 (ODU)
28.6 (Whole units)
dB(A)
65
68
69
119,400 / 102,400
kW
22.0 / 18.8
28.1 / 25.75
35.0 / 30.0
kW
7.5 / 8.85
9.6 / 15.00
12.0 / 13.25
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.93
2.93
2.92
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 7.2kg
Btu/h
85,000
106,000
130,000
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
31.1
38.0
Coil
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Φ12.7 (Liquid), Φ28.6 (Gas)
Noise level
kW
8.3
10.3
12.6
Refrigerant piping size
COP
W/W
3.01
3.02
3.02
Ambient temperature
Max. power input
W
11,700 (Whole units)
1,400 (IDU)
17,300 (Whole units)
Max. current
A
19.3 (Whole units)
5.8 (IDU)
28.6 (Whole units)
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
6,375 (3,750CFM)
Pa
100
100
150
dB(A)
58
56
63
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Wireless controller (R51/E)
Wired controller (KJR-29B)
°C
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
177 / 192
201 / 217
Net / Gross weight
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
Wireless controller (R51/E)
Net (W×H×D)
mm
1,443×450×846
1452×462×797
1,988×669×906
Packing (W×H×D)
mm
1,549×476×917
1,555×500×875
2,095×800×964
kg
105 / 120
97 / 109
188 / 220
Net / Gross weight
Dimension
mm
unit is 7.5m.
Copper tube and aluminum fin
Dimension
MOV-120HN1-C
380~415V, 3Ph~, 50Hz
96,000 / 87,860
kW
Noise level (Hi)
MOVTA-96HN1-R
380~415V, 3Ph~, 50Hz
75,100 / 64,100
Input
Standard external static pressure
MOV-76HN1-C
380~415V, 3Ph~, 50Hz
Btu/h
25.0
Heating
MOV-120HN1-C
unit is 7.5m.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
4. Specifications are subject to change without prior notice for product improvement.
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
4. Specifications are subject to change without prior notice for product improvement.
23
24
Controllers
MTA-76HRN1
Specifications - Tropical (T3) Application
MTA-76CRN1
MTB1T-96CWN1
Indoor unit model
Outdoor unit model / Quantity
MTA-120CRN1
Cooling
Input (T1/T3)
EER (T1)
Capacity
MTA-150CRN1
MTA-76CRN1
MTB1T-96CWN1
MTA-120CRN1
MTA-150CRN1
MOV-76CN1-C / 1
MOVTA-96CN1-R / 1
MOV-120CN1-C / 1
MOV-76CN1-C / 2
Indoor unit power supply
Capacity (T1/T3)
MOV-76CN1-C
MOVTA-96CN1-R
220~240V, 1Ph~, 50Hz
Outdoor unit model
17.3 (Whole units)
23.7 (ODU)
28.6 (Whole units)
dB(A)
65
68
69
kW
22.0 / 18.8
28.1 / 25.75
35.0 / 30.0
44.0 / 38.2
kW
7.5 / 8.85
9.6 / 15.0
12.0 / 13.25
15.1 / 18.00
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.93
2.93
2.92
2.91
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 7.2kg
Btu/h
-
-
-
-
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
-
-
-
Coil
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Φ12.7 (Liquid), Φ28.6 (Gas)
Max. current
Noise level
-
-
-
Refrigerant piping size
COP
W/W
-
-
-
-
Ambient temperature
kW
11.7 (Whole units)
1.4 (IDU)
17.3 (Whole units)
21.2 (Whole units)
Max. current
A
19.3 (Whole units)
5.8 (IDU)
28.6 (Whole units)
35.0 (Whole units)
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
6,375 (3,750CFM)
7,650 (4,500CFM)
Pa
100
100
150
150
dB(A)
58
56
63
79
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Wireless controller (R51/CE)
Wired controller (KJR-29B)
Dimension
Net / Gross weight
mm
°C
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
171 / 190
168 / 183
199 / 215
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
Net / Gross weight
14.4 (ODU)
19.3 (Whole units)
150,100 / 130,300
-
Dimension
11.7 (Whole units)
A
119,400 / 102,400
kW
Noise level (Hi)
kW
96,000 / 87,860
kW
Standard external static pressure
MOV-120CN1-C
380~415V, 3Ph~, 50Hz
75,100 / 64,100
Input
Max. power input
MOVTA-96CN1-R
380~415V, 3Ph~, 50Hz
Btu/h
-
Heating
MOV-76CN1-C
380~415V, 3Ph~, 50Hz
Outdoor unit power supply
Max. power input
MOV-120CN1-C
Wireless controller (R51/CE)
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
Wireless controller (R51/CE)
Net (W×H×D)
mm
1,443×450×846
1,452×462×797
1,988×669×906
1,988×669×906
Packing (W×H×D)
mm
1,549×476×917
1,555×500×875
2,095×800×964
2,095×800×964
kg
105 / 120
97 / 109
188 / 220
188 / 200
unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
25
26
Tropical (T3) Application
Tropical (T3) Application
Medium static pressure duct, cooling only
Specifications - Tropical (T3) Application
MTA-76CRN1
MTB1T-96CWN1
Indoor unit model
Outdoor unit model / Quantity
MTA-120CRN1
Cooling
Input (T1/T3)
EER (T1)
Capacity
MTA-150CRN1
MTA-76CRN1
MTB1T-96CWN1
MTA-120CRN1
MTA-150CRN1
MOV-76CN1-C / 1
MOVTA-96CN1-R / 1
MOV-120CN1-C / 1
MOV-76CN1-C / 2
Indoor unit power supply
Capacity (T1/T3)
MOV-76CN1-C
MOVTA-96CN1-R
220~240V, 1Ph~, 50Hz
Outdoor unit model
17.3 (Whole units)
23.7 (ODU)
28.6 (Whole units)
dB(A)
65
68
69
kW
22.0 / 18.8
28.1 / 25.75
35.0 / 30.0
44.0 / 38.2
kW
7.5 / 8.85
9.6 / 15.0
12.0 / 13.25
15.1 / 18.00
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.93
2.93
2.92
2.91
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 7.2kg
Btu/h
-
-
-
-
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
-
-
-
Coil
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Φ12.7 (Liquid), Φ28.6 (Gas)
Max. current
Noise level
-
-
-
Refrigerant piping size
COP
W/W
-
-
-
-
Ambient temperature
kW
11.7 (Whole units)
1.4 (IDU)
17.3 (Whole units)
21.2 (Whole units)
Max. current
A
19.3 (Whole units)
5.8 (IDU)
28.6 (Whole units)
35.0 (Whole units)
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
6,375 (3,750CFM)
7,650 (4,500CFM)
Pa
100
100
150
150
dB(A)
58
56
63
79
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Wireless controller (R51/CE)
Wired controller (KJR-29B)
Dimension
Net / Gross weight
mm
°C
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
171 / 190
168 / 183
199 / 215
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
Net / Gross weight
14.4 (ODU)
19.3 (Whole units)
150,100 / 130,300
-
Dimension
11.7 (Whole units)
A
119,400 / 102,400
kW
Noise level (Hi)
kW
96,000 / 87,860
kW
Standard external static pressure
MOV-120CN1-C
380~415V, 3Ph~, 50Hz
75,100 / 64,100
Input
Max. power input
MOVTA-96CN1-R
380~415V, 3Ph~, 50Hz
Btu/h
-
Heating
MOV-76CN1-C
380~415V, 3Ph~, 50Hz
Outdoor unit power supply
Max. power input
MOV-120CN1-C
Wireless controller (R51/CE)
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
Wireless controller (R51/CE)
Net (W×H×D)
mm
1,443×450×846
1,452×462×797
1,988×669×906
1,988×669×906
Packing (W×H×D)
mm
1,549×476×917
1,555×500×875
2,095×800×964
2,095×800×964
kg
105 / 120
97 / 109
188 / 220
188 / 200
unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
25
26
Tropical (T3) Application
Tropical (T3) Application
Medium static pressure duct, cooling only
Specifications - Tropical (T3) Application
Heat pump:
MHB-76HRN1
Cooling only:
MHB-76CRN1
Heat pump:
MHB1T-96HWN1
Cooling only:
MHB1T-96CWN1
Indoor unit model
Outdoor unit model / Quantity
MHB-76HRN1
MHB1T-96HWN1
MHB-76CRN1
MHB1T-96CWN1
MOV-76HN1-C / 1
MOVTA-96HN1-R / 1
MOV-76CN1-C / 1
MOVTA-96CN1-R / 1
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
EER (T1)
Capacity
Heating
Heat pump:
MOV-76HN1-C MOVTA-96HN1-R
Cooling only:
MOV-76CN1-C MOVTA-96CN1-R
220~240V, 1Ph~, 50Hz
Outdoor unit model
Max. power input
11.7 (Whole units)
14.4 (ODU)
11.7 (Whole units)
14.4 (ODU)
A
19.3 (Whole units)
23.7 (ODU)
19.3 (Whole units)
23.7 (ODU)
dB(A)
65
68
65
68
96,000 / 87,860
kW
22.0 / 18.8
28.1 / 25.75
22.0 / 18.8
28.1 / 25.75
kW
7.5 / 8.85
9.6 / 15.00
7.5 / 8.85
9.6 / 15.00
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.93
2.93
2.93
2.93
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 5.4kg
R410A / 6.0kg
Btu/h
85,000
106,000
-
-
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
kW
25.0
31.1
-
-
Coil
Max. current
Noise level
Copper tube and aluminum fin
8.3
10.3
-
-
Refrigerant piping size
3.01
3.02
-
-
Ambient temperature
kW
11.7 (Whole units)
1.4 (Whole units)
11.7 (Whole units)
1.4 (Whole units)
Max. current
A
19.3 (Whole units)
5.8 (Whole units)
19.3 (Whole units)
5.8 (Whole units)
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
4,250 (2,500CFM)
5,100 (3,000CFM)
Pa
196
196
196
196
dB(A)
58
56
58
56
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Wireless controller (R51/E)
Wired controller (KJR-29B)
Dimension
mm
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25.4 (Gas)
°C
17~52
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
1,312×919×658
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
177 / 192
171 / 190
168 / 183
Net / Gross weight
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
Net / Gross weight
kW
75,100 / 64,100
kW
Dimension
MOVTA-96CN1-R
380~415V, 3Ph~, 50Hz
96,000 / 87,860
W/W
Noise level (Hi)
MOV-76CN1-C
380~415V, 3Ph~, 50Hz
75,100 / 64,100
COP
Standard external static pressure
MOVTA-96HN1-R
380~415V, 3Ph~, 50Hz
Btu/h
Input
Max. power input
MOV-76HN1-C
380~415V, 3Ph~, 50Hz
Outdoor unit power supply
Wireless controller (R51/CE)
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
Wired controller (KJR-29B)
Net (W×H×D)
mm
1,443×450×846
1,452×462×797
1,443×450×846
1,452×462×797
Packing (W×H×D)
mm
1,549×476×917
1,555×500×875
1,549×476×917
1,555×500×875
kg
105 / 120
97 / 109
105 / 120
97 / 109
unit is 7.5m.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
4. Specifications are subject to change without prior notice for product improvement.
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
27
28
Tropical (T3) Application
Tropical (T3) Application
High static pressure duct, heat pump & cooling only
Specifications - Tropical (T3) Application
Heat pump:
MHB-76HRN1
Cooling only:
MHB-76CRN1
Heat pump:
MHB1T-96HWN1
Cooling only:
MHB1T-96CWN1
Indoor unit model
Outdoor unit model / Quantity
MHB-76HRN1
MHB1T-96HWN1
MHB-76CRN1
MHB1T-96CWN1
MOV-76HN1-C / 1
MOVTA-96HN1-R / 1
MOV-76CN1-C / 1
MOVTA-96CN1-R / 1
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
EER (T1)
Capacity
Heating
Heat pump:
MOV-76HN1-C MOVTA-96HN1-R
Cooling only:
MOV-76CN1-C MOVTA-96CN1-R
220~240V, 1Ph~, 50Hz
Outdoor unit model
Max. power input
11.7 (Whole units)
14.4 (ODU)
11.7 (Whole units)
14.4 (ODU)
A
19.3 (Whole units)
23.7 (ODU)
19.3 (Whole units)
23.7 (ODU)
dB(A)
65
68
65
68
96,000 / 87,860
kW
22.0 / 18.8
28.1 / 25.75
22.0 / 18.8
28.1 / 25.75
kW
7.5 / 8.85
9.6 / 15.00
7.5 / 8.85
9.6 / 15.00
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
Scroll / 1
W/W
2.93
2.93
2.93
2.93
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 5.4kg
R410A / 6.0kg
Btu/h
85,000
106,000
-
-
Fan type / Drive type
Axial / Direct
Axial / Direct
Axial / Direct
Axial / Direct
kW
25.0
31.1
-
-
Coil
Max. current
Noise level
Copper tube and aluminum fin
8.3
10.3
-
-
Refrigerant piping size
3.01
3.02
-
-
Ambient temperature
kW
11.7 (Whole units)
1.4 (Whole units)
11.7 (Whole units)
1.4 (Whole units)
Max. current
A
19.3 (Whole units)
5.8 (Whole units)
19.3 (Whole units)
5.8 (Whole units)
Air flow (Hi)
3
m /h
4,250 (2,500CFM)
5,100 (3,000CFM)
4,250 (2,500CFM)
5,100 (3,000CFM)
Pa
196
196
196
196
dB(A)
58
56
58
56
Fan type / Drive type
Centrifugal / Direct
Coil
Controller
Wireless controller (R51/E)
Wired controller (KJR-29B)
Dimension
mm
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25.4 (Gas)
°C
17~52
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
1,312×919×658
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
177 / 192
171 / 190
168 / 183
Net / Gross weight
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
Copper tube and aluminum fin
Net / Gross weight
kW
75,100 / 64,100
kW
Dimension
MOVTA-96CN1-R
380~415V, 3Ph~, 50Hz
96,000 / 87,860
W/W
Noise level (Hi)
MOV-76CN1-C
380~415V, 3Ph~, 50Hz
75,100 / 64,100
COP
Standard external static pressure
MOVTA-96HN1-R
380~415V, 3Ph~, 50Hz
Btu/h
Input
Max. power input
MOV-76HN1-C
380~415V, 3Ph~, 50Hz
Outdoor unit power supply
Wireless controller (R51/CE)
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
Wired controller (KJR-29B)
Net (W×H×D)
mm
1,443×450×846
1,452×462×797
1,443×450×846
1,452×462×797
Packing (W×H×D)
mm
1,549×476×917
1,555×500×875
1,549×476×917
1,555×500×875
kg
105 / 120
97 / 109
105 / 120
97 / 109
unit is 7.5m.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
4. Specifications are subject to change without prior notice for product improvement.
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
27
28
Tropical (T3) Application
Tropical (T3) Application
High static pressure duct, heat pump & cooling only
Floor-standing Indoor Unit
Specifications - T1 Application
Indoor unit model
MFA2-76HRN1
MFA2-96HRN1
MOV-76HN1-R / 1
MOV-96HN1-R / 1
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
76,000
96,000
kW
22.3
28.1
kW
7.5
9.6
Outdoor unit model / Quantity
Tropical (T3) Application
Indoor unit power supply
Capacity
Cooling
Input
EER
R51/CE
R51/E
Capacity
Heating
Strong wind, long distance air supply
W/W
2.97
2.93
Btu/h
85,300
106,000
kW
25.0
31.0
Input
kW
8.3
10.3
COP
W/W
3.01
3.02
W
700
700
Max. power input
Max. current
A
3.0
3.0
Air flow (Hi)
m3/h
4,300 (2,530CFM)
4,800 (2,825CFM)
Noise level
dB(A)
56
56
Fan type / Drive type
Coil
Controller
Dimension
Touch screen control
1,200×1,860×518
1,200×1,860×518
mm
1,362×2,050×582
1,362×2,050×582
kg
130 / 145
140 / 154
Max. power input
Max. current
Noise level
MOV-76HN1-R
MOV-96HN1-R
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
kW
11.7
14.4
A
19.3
23.7
68
68
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 5.5kg
dB(A)
Fan type / Drive type
Coil
Refrigerant piping size
Air intake panel
Ambient temperature
Electrical box,
Air filter
Dimension
Auto Restart
Auto
Air Function
Function
Defrosting
Independent
Dehumidification
Axial / Direct
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
°C
17~46
17~46
mm
1,260×908×700
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
187 / 204
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
Features:
29
PTC Heater
Timer
mm
Axial / Direct
Copper tube and aluminum fin
Body (W×H×D)
Net / Gross weight
Anti-Cold
Remote controller (R51/E)
mm
Outdoor unit power supply
Screw
Remote controller (R51/E)
Packing (W×H×D)
Outdoor unit model
Screw cap
Centrifugal / Direct
Copper tube and aluminum fin
Net (W×H×D)
Net / Gross weight
Washable inlet air filter
Centrifugal / Direct
Copper tube and aluminum fin
Tropical (T3) Application
Floor-standing, heat pump
Standard
Optional
30
Floor-standing Indoor Unit
Specifications - T1 Application
Indoor unit model
MFA2-76HRN1
MFA2-96HRN1
MOV-76HN1-R / 1
MOV-96HN1-R / 1
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
76,000
96,000
kW
22.3
28.1
kW
7.5
9.6
Outdoor unit model / Quantity
Tropical (T3) Application
Indoor unit power supply
Capacity
Cooling
Input
EER
R51/CE
R51/E
Capacity
Heating
Strong wind, long distance air supply
W/W
2.97
2.93
Btu/h
85,300
106,000
kW
25.0
31.0
Input
kW
8.3
10.3
COP
W/W
3.01
3.02
W
700
700
Max. power input
Max. current
A
3.0
3.0
Air flow (Hi)
m3/h
4,300 (2,530CFM)
4,800 (2,825CFM)
Noise level
dB(A)
56
56
Fan type / Drive type
Coil
Controller
Dimension
Touch screen control
1,200×1,860×518
1,200×1,860×518
mm
1,362×2,050×582
1,362×2,050×582
kg
130 / 145
140 / 154
Max. power input
Max. current
Noise level
MOV-76HN1-R
MOV-96HN1-R
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
kW
11.7
14.4
A
19.3
23.7
68
68
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 5.5kg
dB(A)
Fan type / Drive type
Coil
Refrigerant piping size
Air intake panel
Ambient temperature
Electrical box,
Air filter
Dimension
Auto Restart
Auto
Air Function
Function
Defrosting
Independent
Dehumidification
Axial / Direct
Copper tube and aluminum fin
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
°C
17~46
17~46
mm
1,260×908×700
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
187 / 204
Notes:
1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor
unit is 7.5m.
2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and
outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
Features:
29
PTC Heater
Timer
mm
Axial / Direct
Copper tube and aluminum fin
Body (W×H×D)
Net / Gross weight
Anti-Cold
Remote controller (R51/E)
mm
Outdoor unit power supply
Screw
Remote controller (R51/E)
Packing (W×H×D)
Outdoor unit model
Screw cap
Centrifugal / Direct
Copper tube and aluminum fin
Net (W×H×D)
Net / Gross weight
Washable inlet air filter
Centrifugal / Direct
Copper tube and aluminum fin
Tropical (T3) Application
Floor-standing, heat pump
Standard
Optional
30
Specifications - T3 Application
Floor-standing, heat pump
Floor-standing, cooling only
Indoor unit model
Outdoor unit model / Quantity
Tropical (T3) Application
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
EER (T1)
Capacity
Heating
MFA-76HRN1
MFA3T-96HRN1
MOV-76HN1-C / 1
MOVTA-96HN1-R / 1
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
75,100 / 64,800
96,000 / 87,860
kW
22.0 / 19.0
28.1 / 25.75
kW
7.5 / 8.98
9.6 / 15.00
W/W
2.93
2.93
Btu/h
85,000
106,000
kW
25.0
31.1
Input
kW
8.3
10.3
COP
W/W
3.01
3.02
Max. power input
Indoor unit model
Outdoor unit model / Quantity
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
EER (T1)
Capacity
Heating
MFA-76CRN1
MFA3T-96CRN1
MFA-120CRN1
MOV-76CN1-C / 1
MOVTA-96CN1-R / 1
MOV-120CN1-C / 1
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
75,100 / 64,800
96,000 / 87,860
121,000 / 110,900
kW
22.0 / 19.0
28.1 / 25.75
35.0 / 32.5
kW
7.5 / 8.98
9.6 / 15.00
13.0 / 15.50
W/W
2.93
2.93
2.69
Btu/h
-
-
-
kW
-
-
-
Input
kW
-
-
-
COP
W/W
-
-
-
kW
11.7 (Whole units)
0.7 (IDU)
Max. power input
kW
11.7 (Whole units)
0.7 (IDU)
17.3 (Whole units)
Max. current
A
19.3 (Whole units)
3.0 (IDU)
Max. current
A
19.3 (Whole units)
3.0 (IDU)
28.6 (Whole units)
Air flow (Hi)
m3/h
4,250 (2,500CFM)
4,800 (2,825CFM)
Air flow (Hi)
m3/h
4,250 (2,500CFM)
4,800 (2,825CFM)
6,060 (3,560CFM)
Noise level
dB(A)
Noise level
dB(A)
58
56
Centrifugal / Direct
Centrifugal / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
Fan type / Drive type
Coil
Controller
Dimension
Fan type / Drive type
Coil
Controller
Remote controller (R51/E)
Remote controller (R51/E)
Net (W×H×D)
mm
1,200×1,860×518
1,200×1,860×518
Packing (W×H×D)
mm
1,362×2,050×582
1,362×2,050×582
kg
158 / 174
140 / 154
Net / Gross weight
Outdoor unit model
Net / Gross weight
Outdoor unit model
MOV-76HN1-C
MOVTA-96HN1-R
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
kW
11.7 (Whole units)
14.4 (ODU)
Max. power input
A
19.3 (Whole units)
23.7 (ODU)
Max. current
Outdoor unit power supply
Max. power input
Max. current
Noise level
Dimension
58
56
65
Centrifugal / Direct
Centrifugal / Direct
Centrifugal / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Remote controller (R51/CE)
Remote controller (R51/CE)
Remote controller (R51/CE)
Net (W×H×D)
mm
1,200×1,860×518
1,200×1,860×518
1,200×1,860×518
Packing (W×H×D)
mm
1,362×2,050×582
1,362×2,050×582
1,362×2,050×582
kg
158 / 174
140 / 154
148 / 174
MOV-76CN1-C
MOVTA-96CN1-R
MOV-120CN1-C
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
kW
11.7 (Whole units)
14.4 (ODU)
17.3 (Whole units)
A
19.3 (Whole units)
23.7 (ODU)
28.6 (Whole units)
Outdoor unit power supply
Noise level
65
68
65
68
69
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 7.2kg
Fan type / Drive type
dB(A)
Fan type / Drive type
Coil
Axial / Direct
Axial / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
dB(A)
Coil
Axial / Direct
Axial / Direct
Axial / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ12.7 (Liquid), Φ28.6 (Gas)
Refrigerant piping size
mm
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Refrigerant piping size
mm
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Ambient temperature
°C
17~52
17~52
Ambient temperature
°C
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
177 / 192
kg
171 / 190
168 / 183
199 / 215
Dimension
Net / Gross weight
Dimension
Net / Gross weight
Notes:
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.
1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.
2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB.
3. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.
4. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
5. Specifications are subject to change without prior notice for product improvement.
31
32
Tropical (T3) Application
Specifications - T3 Application
Specifications - T3 Application
Floor-standing, heat pump
Floor-standing, cooling only
Indoor unit model
Outdoor unit model / Quantity
Tropical (T3) Application
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
EER (T1)
Capacity
Heating
MFA-76HRN1
MFA3T-96HRN1
MOV-76HN1-C / 1
MOVTA-96HN1-R / 1
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
75,100 / 64,800
96,000 / 87,860
kW
22.0 / 19.0
28.1 / 25.75
kW
7.5 / 8.98
9.6 / 15.00
W/W
2.93
2.93
Btu/h
85,000
106,000
kW
25.0
31.1
Input
kW
8.3
10.3
COP
W/W
3.01
3.02
Max. power input
Indoor unit model
Outdoor unit model / Quantity
Indoor unit power supply
Capacity (T1/T3)
Cooling
Input (T1/T3)
EER (T1)
Capacity
Heating
MFA-76CRN1
MFA3T-96CRN1
MFA-120CRN1
MOV-76CN1-C / 1
MOVTA-96CN1-R / 1
MOV-120CN1-C / 1
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
220~240V, 1Ph~, 50Hz
Btu/h
75,100 / 64,800
96,000 / 87,860
121,000 / 110,900
kW
22.0 / 19.0
28.1 / 25.75
35.0 / 32.5
kW
7.5 / 8.98
9.6 / 15.00
13.0 / 15.50
W/W
2.93
2.93
2.69
Btu/h
-
-
-
kW
-
-
-
Input
kW
-
-
-
COP
W/W
-
-
-
kW
11.7 (Whole units)
0.7 (IDU)
Max. power input
kW
11.7 (Whole units)
0.7 (IDU)
17.3 (Whole units)
Max. current
A
19.3 (Whole units)
3.0 (IDU)
Max. current
A
19.3 (Whole units)
3.0 (IDU)
28.6 (Whole units)
Air flow (Hi)
m3/h
4,250 (2,500CFM)
4,800 (2,825CFM)
Air flow (Hi)
m3/h
4,250 (2,500CFM)
4,800 (2,825CFM)
6,060 (3,560CFM)
Noise level
dB(A)
Noise level
dB(A)
58
56
Centrifugal / Direct
Centrifugal / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
Fan type / Drive type
Coil
Controller
Dimension
Fan type / Drive type
Coil
Controller
Remote controller (R51/E)
Remote controller (R51/E)
Net (W×H×D)
mm
1,200×1,860×518
1,200×1,860×518
Packing (W×H×D)
mm
1,362×2,050×582
1,362×2,050×582
kg
158 / 174
140 / 154
Net / Gross weight
Outdoor unit model
Net / Gross weight
Outdoor unit model
MOV-76HN1-C
MOVTA-96HN1-R
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
kW
11.7 (Whole units)
14.4 (ODU)
Max. power input
A
19.3 (Whole units)
23.7 (ODU)
Max. current
Outdoor unit power supply
Max. power input
Max. current
Noise level
Dimension
58
56
65
Centrifugal / Direct
Centrifugal / Direct
Centrifugal / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Remote controller (R51/CE)
Remote controller (R51/CE)
Remote controller (R51/CE)
Net (W×H×D)
mm
1,200×1,860×518
1,200×1,860×518
1,200×1,860×518
Packing (W×H×D)
mm
1,362×2,050×582
1,362×2,050×582
1,362×2,050×582
kg
158 / 174
140 / 154
148 / 174
MOV-76CN1-C
MOVTA-96CN1-R
MOV-120CN1-C
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
380~415V, 3Ph~, 50Hz
kW
11.7 (Whole units)
14.4 (ODU)
17.3 (Whole units)
A
19.3 (Whole units)
23.7 (ODU)
28.6 (Whole units)
Outdoor unit power supply
Noise level
65
68
65
68
69
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Compressor (Type / Quantity)
Scroll / 1
Scroll / 1
Scroll / 1
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
Refrigerant (Type / Charged)
R410A / 5.4kg
R410A / 6.0kg
R410A / 7.2kg
Fan type / Drive type
dB(A)
Fan type / Drive type
Coil
Axial / Direct
Axial / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
dB(A)
Coil
Axial / Direct
Axial / Direct
Axial / Direct
Copper tube and aluminum fin
Copper tube and aluminum fin
Copper tube and aluminum fin
Φ12.7 (Liquid), Φ28.6 (Gas)
Refrigerant piping size
mm
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Refrigerant piping size
mm
Φ9.52 (Liquid), Φ22 (Gas)
Φ9.52 (Liquid), Φ25 (Gas)
Ambient temperature
°C
17~52
17~52
Ambient temperature
°C
17~52
17~52
17~52
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
Body (W×H×D)
mm
1,260×908×700
1,312×919×658
1,260×908×700
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
Packing (W×H×D)
mm
1,320×1,060×730
1,320×1,060×730
1,320×1,060×730
kg
174 / 193
177 / 192
kg
171 / 190
168 / 183
199 / 215
Dimension
Net / Gross weight
Dimension
Net / Gross weight
Notes:
Notes:
1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.
1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.
2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.
2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.
3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB.
3. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.
4. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.
3. Specifications are subject to change without prior notice for product improvement.
5. Specifications are subject to change without prior notice for product improvement.
31
32
Tropical (T3) Application
Specifications - T3 Application
Dimensions
Tropical (T3) Application
1,372
Tropical (T3) application
Duct indoor unit: MTB1T-96HWN1, MTB1T-96CWN1
MHB1T-96HWN1, MHB1T-96CWN1
797
758
704
1,372
224
462
462
30
196
112
153
462
30
47
24
1,231
24
196
1,231
106
858.5
123
47
645
180
24
56.5
180
1,895
1,834
106
858.5
123
47
645
180
24
15
56.5
180
1,895
15
749.5
749.5
Tropical (T3) application
Duct indoor unit: MTA-76HRN1, MTA-76CRN1
MHB-76HRN1, MHB-76CRN1
(Units: mm)
1,350
112
Tropical (T3) application
Duct indoor unit: MTA-120HRN1, MTA-120CRN1
(Units: mm)
T1 application
Duct indoor unit: MHA-150HWN1, MHA-192HWN1
(Units: mm)
1,834
224
153
462
47
797
758
704
Tropical (T3) Application
T1 application
Duct indoor unit: MTB-76HWN1, MTB-96HWN1, MTB-120HWN1
MHB-76HWN1, MHB-96HWN1
(Units: mm)
Tropical (T3) application
Duct indoor unit: MTA-150CRN1
(Units: mm)
656
469
760
1,834
106
858.5
123
47
45
168
450
645
231
132
180
26
507
1,205
800
840
33
180
259.5
1,895
24
56.5
108
15
749.5
34
Dimensions
Tropical (T3) Application
1,372
Tropical (T3) application
Duct indoor unit: MTB1T-96HWN1, MTB1T-96CWN1
MHB1T-96HWN1, MHB1T-96CWN1
797
758
704
1,372
224
462
462
30
196
112
153
462
30
47
24
1,231
24
196
1,231
106
858.5
123
47
645
180
24
56.5
180
1,895
1,834
106
858.5
123
47
645
180
24
15
56.5
180
1,895
15
749.5
749.5
Tropical (T3) application
Duct indoor unit: MTA-76HRN1, MTA-76CRN1
MHB-76HRN1, MHB-76CRN1
(Units: mm)
1,350
112
Tropical (T3) application
Duct indoor unit: MTA-120HRN1, MTA-120CRN1
(Units: mm)
T1 application
Duct indoor unit: MHA-150HWN1, MHA-192HWN1
(Units: mm)
1,834
224
153
462
47
797
758
704
Tropical (T3) Application
T1 application
Duct indoor unit: MTB-76HWN1, MTB-96HWN1, MTB-120HWN1
MHB-76HWN1, MHB-96HWN1
(Units: mm)
Tropical (T3) application
Duct indoor unit: MTA-150CRN1
(Units: mm)
656
469
760
1,834
106
858.5
123
47
45
168
450
645
231
132
180
26
507
1,205
800
840
33
180
259.5
1,895
24
56.5
108
15
749.5
34
T1 & Tropical (T3) application
Outdoor unit: MOV-120HN1-R
MOV-120HN1-C
MOV-120CN1-C
(Units: mm)
T1 & Tropical (T3) application
Floor-standing indoor unit: MFA2-76HRN1, MFA2-96HRN1,
MFA-76HRN1, MFA-76CRN1, MFA3T-96HRN1, MFA3T-96CRN1, MFAT-120CRN1
(Units: mm)
420
1,200
1,260
960
762
118
908
1,860
676
700
460
519
93
737
140
T1 application
Outdoor unit: MOV-150HN1-R
(Units: mm)
T1 & Tropical (T3) application
Outdoor unit: MOV-76HN1-R, MOV-96HN1-R, MOV-76HN1-C, MOV-76CN1-C
(Units: mm)
654
1,260
762
Controllers
1,196
Controllers
654
765
1,250
1,250
908
676
700
765
1,615
57
179
1,200
736
T1 application
Outdoor unit: MOV-192HN1-R
(Units: mm)
T1 & Tropical (T3) application
Outdoor unit: MOVTA-96HN1-R, MOVTA-96CN1-R
(Units: mm)
658
1,260
1,312
1,390
1,288
105
435
765
91
87
69
35
1,615
919
206
1,2
60
6
73
36
T1 & Tropical (T3) application
Outdoor unit: MOV-120HN1-R
MOV-120HN1-C
MOV-120CN1-C
(Units: mm)
T1 & Tropical (T3) application
Floor-standing indoor unit: MFA2-76HRN1, MFA2-96HRN1,
MFA-76HRN1, MFA-76CRN1, MFA3T-96HRN1, MFA3T-96CRN1, MFAT-120CRN1
(Units: mm)
420
1,200
1,260
960
762
118
908
1,860
676
700
460
519
93
737
140
T1 application
Outdoor unit: MOV-150HN1-R
(Units: mm)
T1 & Tropical (T3) application
Outdoor unit: MOV-76HN1-R, MOV-96HN1-R, MOV-76HN1-C, MOV-76CN1-C
(Units: mm)
654
1,260
762
Controllers
1,196
Controllers
654
765
1,250
1,250
908
676
700
765
1,615
57
179
1,200
736
T1 application
Outdoor unit: MOV-192HN1-R
(Units: mm)
T1 & Tropical (T3) application
Outdoor unit: MOVTA-96HN1-R, MOVTA-96CN1-R
(Units: mm)
658
1,260
1,312
1,390
1,288
105
435
765
91
87
69
35
1,615
919
206
1,2
60
6
73
36
Silent mode
During the operating, when operate the silent mode, the units can reduce the running noise through setting the fan speed
to low automatically. It will help you bring a quieter environment.
Controllers
Centralized Controller - CCM30
Parameter
Model: CCM30 + MD-NIM01
Dimension (mm): 180×122×78 (CCM30BKE-B)
180×122×68 (CCM30BKE-A)
81.8×46.8×15.5 (MD-NIM01)
CCM30
Parameter
Power: 198~242V, 50/60Hz (MD-CCM30)
DC+5V (MD-NIM01)
Centralized control
Model: R51/CE (Cooling only type)
MD-CCM30, centralized controller, is a multifunctional device that can control up to 64 indoor units within a maximum
connection length of 1200m.
User can group control or individual control and the set temperature of each units can also different.
The indoor units working status and error codes can be displayed in the screen of CCM30. Via checking the error codes
table in the user manual, user can easily find out the malfunction and call the service engineer.
R51/E (Heat pump type)
Dimension (mm): 140×60×15
Controllers
MD-NIM01
Power: 1.5V (LR03/AAA)×2
Standard features
It provides a convenient way for users to control the air conditioners everywhere within a range up to 11m.
Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to
the set time.
Wired Controller - KJR-29B
Three lock modes
Centralized controller provides a superior way to manage the indoor units. Users can be able to make their own choice
from three locking mode: locking the wireless controller, locking the running mode or locking centralized controller
keyboard as they wish.
Access to network monitoring
MD-CCM30 is able to bridge up to 64 indoor units to network monitoring system and building management system.
Parameter
Max.64
Model: KJR-29B (Touch-style key)
MD-NIM01
MD-NIM01
MD-NIM01
CCM30
MD-NIM01
Dimension (mm): 120×120×20
Power: From the display panel, extra power is unnecessary.
Standard features
Keyboard locking function as standard, it can be used to prevent other people from using the controller.
Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to
the set time.
Easy installation
Two structures design, easy installation. Structure A (Model No. CCM30/BKE-A) should be embedded into the wall and
structure B (Model No. CCM30/BKE-B) doesn’t need.
Upper side outlet
Remote signal receiving function
KJR-29B provides a signal receiver to receive the signal from
remote controller.
The received signal can be directly sent to the indoor unit by
wired controller. It is convenient to control the air conditioner.
Remote signal
receiver
Rear side outlet
Silent Key
Structure A
37
Structure B
Under side outlet
Structure B leading-out mode sketch
38
Controllers
Remote Controller - R51
Silent mode
During the operating, when operate the silent mode, the units can reduce the running noise through setting the fan speed
to low automatically. It will help you bring a quieter environment.
Controllers
Centralized Controller - CCM30
Parameter
Model: CCM30 + MD-NIM01
Dimension (mm): 180×122×78 (CCM30BKE-B)
180×122×68 (CCM30BKE-A)
81.8×46.8×15.5 (MD-NIM01)
CCM30
Parameter
Power: 198~242V, 50/60Hz (MD-CCM30)
DC+5V (MD-NIM01)
Centralized control
Model: R51/CE (Cooling only type)
MD-CCM30, centralized controller, is a multifunctional device that can control up to 64 indoor units within a maximum
connection length of 1200m.
User can group control or individual control and the set temperature of each units can also different.
The indoor units working status and error codes can be displayed in the screen of CCM30. Via checking the error codes
table in the user manual, user can easily find out the malfunction and call the service engineer.
R51/E (Heat pump type)
Dimension (mm): 140×60×15
Controllers
MD-NIM01
Power: 1.5V (LR03/AAA)×2
Standard features
It provides a convenient way for users to control the air conditioners everywhere within a range up to 11m.
Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to
the set time.
Wired Controller - KJR-29B
Three lock modes
Centralized controller provides a superior way to manage the indoor units. Users can be able to make their own choice
from three locking mode: locking the wireless controller, locking the running mode or locking centralized controller
keyboard as they wish.
Access to network monitoring
MD-CCM30 is able to bridge up to 64 indoor units to network monitoring system and building management system.
Parameter
Max.64
Model: KJR-29B (Touch-style key)
MD-NIM01
MD-NIM01
MD-NIM01
CCM30
MD-NIM01
Dimension (mm): 120×120×20
Power: From the display panel, extra power is unnecessary.
Standard features
Keyboard locking function as standard, it can be used to prevent other people from using the controller.
Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to
the set time.
Easy installation
Two structures design, easy installation. Structure A (Model No. CCM30/BKE-A) should be embedded into the wall and
structure B (Model No. CCM30/BKE-B) doesn’t need.
Upper side outlet
Remote signal receiving function
KJR-29B provides a signal receiver to receive the signal from
remote controller.
The received signal can be directly sent to the indoor unit by
wired controller. It is convenient to control the air conditioner.
Remote signal
receiver
Rear side outlet
Silent Key
Structure A
37
Structure B
Under side outlet
Structure B leading-out mode sketch
38
Controllers
Remote Controller - R51
1605-1S1512
Commercial Air Conditioners 2016
Split Commercial A/C
Commercial Air Conditioner Division
Midea Group
Add.: West Region of Midea Commercial Air Conditioner Department, Industry Avenue,
Beijiao, Shunde, Foshan, Guangdong, P. R. China
Midea CAC After-service Application
Midea CAC News Application
Postal code: 528311
Tel: +86-757-26338346 Fax: +86-757-22390205
cac.midea.com
global.midea.com
Note: The data in this book may be changed without notice for further improvement
iOS Version
Android Version
iOS Version
on quality and performance.
R410A 50Hz
Open as PDF
Similar pages