EZ Solo EZ Touch EZ Pro

Catalog Number:
Date:
Project:
OVERVIEW
EasylTM is a DMX512 controller featuring an LCD touchscreen. Easyl’s powerfully simple interface
enables intuitive control of an entire universe (512 channels) of color changing luminaires.
Preprogrammed shows with static and color changing effects simplify initial setup and provide a
great starting point for customization. EasylTM provides design, edit, store and recall functions for a
maximum of 12 shows and features quick adjust intensity and speed sliders. EasylTM controls LED
luminaires that are DMX512-A compliant , including those with RDM functionality.
EasylTM Solo Is a standalone entry-level controller enabling show creation and playback
directly at the LCD touchscreen.
EasylTM Touch features an astronomic time clock for automating shows and expands the controller’s features by accepting inputs from remote button stations, and
button station contact closure inputs.
EasylTM Pro
is further enhanced by using Easyl StudioTM computer software to create
multi-zone shows, and Easyl Pro features a 20 hour DMX512 capture from a
theatrical console.
EZ Solo
EZ Touch
EZ Pro
DMX 512 Show Controller
FEATURES
• Modern aesthetic that installs in a single gang box
• Full color LCD touchscreen
• User defined programs and naming
• Customizable settings for screen brightness, access control passcodes, and screensaver image
• Master intensity and playback speed adjustment.
• Power failure memory
• Integrated help screens
Warranty
Two-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
ORDERING INFORMATION
EZ
Example: EZSOLO WH 120/277
Series
EZSOLO
EZTOUCH
EZPRO
Finish
Entry level, stand alone DMX controller
Mid level, functions with EZ RB button stations, features
timeclock
Pro Level, functions with EZ RB and EZ RB PRO RTS stations,
features timeclock and configuration software
Supply Voltage
WH
White
BK
Black
120/277
120 or 277 VAC
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 03/07/16
Part No. EZ-PRO-01 rev A
1 of 6
EasylTM Power Supply
Each EasylTM controller is provided with a 24VDC power supply (EZ PS). The power supply is remotely installed on a standard electrical enclosure. When
ordering an EasylTM, the voltage selected determines which power supply is provided with the controller.
SPECIFICATIONS
FUNCTIONAL
EasylTM Controller (EasylTM Solo | Touch | Pro)
EasylTM Power Supply (EZ PS)
• DMX Controller
• 3.5” Color LCD touchscreen
• Resistive touchscreen technology works well with gloves and prosthetics.
• Internally stores 12 shows
• 64,000 available colors on LCD
• Adjustable backlight control
• Adjustable timeout period
• Screen lockout passcode
• Programming lockout passcode
• Colors: Black, White
• Supports up to 3 remote stations (Touch & Pro only)
• Show naming on screen
• Class 2 power supply
• Installs on standard electrical enclosures
• Color: Black
ELECTRICAL
• Input Voltage: 24VDC (Class 2)
• Input Power: 1.0W nominal
• Current: 40mA max
ENVIRONMENTAL
• Operating Temp: 14 to 105F (-10 to 40C)
• Storage Temp: -14 to 160F (-26 to 71C)
• Relative Humidity: 90% non-condensing
MECHANICAL
• Mounts to single gang backbox
ELECTRICAL
• Input - EZ PS 120/277: 120 or 277VAC
• Input - EZ PS 347: 347VAC
• Power Draw: 2.0W nominal
• Output: 24VDC Class 2
ENVIRONMENTAL
• Operating Temp: 14 to 105F (-10 to 40C)
• Storage Temp: -14 to 160F (-26 to 71C)
• Relative Humidity: 90% non-condensing
MECHANICAL
• Mounts in a 1/2” knockout in a standard enclosure, remote from the
• Easyl station.
DIMENSIONS
• All dimensions are inches (millimeters)
• Size: 3.0” H X 2.25” W X 1.88“ D (76.2 x 57.5 x 47.7)
• Weight: 6 oz (0.17Kg)
• STANDARDS (EZ PS)
• UL/CUL
• Plenum Rated
DIMENSIONS
• All dimensions are inches (millimeters)
• Size: 5.06” H X 3.5” W X 0.69“ D
• (128.5 x 88.9 x 17.5 )
• Weight: 6 oz (0.17Kg)
OTHER
• Compatible with DMX512-A ANSI E1.11-2008
• Compatible with DMX512 RDM ANSI E1.20-2006
• DMX Channels: 512
• Standalone Memory: 20 hours of shows (Pro only)
• Made in the USA
• 2 Year Limited Warranty
EASYL
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 03/07/16
Part No. EZ-PRO-01 rev A
2 of 6
WIRING DIAGRAMS
Always read product installation instructions prior to installation
EasylTM Solo 120/277
The DMX 512 Daisy Chained Network Requires:
BLACK (120V)
ORANGE (277V)
H
N
RED
BLA
CK
WHITE
EZ PS
120/277
MIDDLE OF
NETWORK NO
TERMINATION
+ 24VDC
RED
DMX COMMON
TO DMX 512
CONTROLLED
FIXTURES
N
O
BLACK
DMX DATA +
END OF
NETWORK
TERMINATION
APPLIED
(DEFAULT)
N
O
WHITE +
DMX DATA -
YELLOW -
DMX SHIELD
DMX 512 NETWORK:
APPROVED SHIELDED
and TWISTED PAIR, PLUS
COMMON WIRE
NETWORK
TERMINATION
SWITCH
TO EARTH
GROUND ONLY
IN STATION
BACKBOX
N
O
DMX PIGTAIL
HARNESS
SOCKET
DETACHABLE
POWER AND
DATA PIGTAIL
HARNESS
EASYL
POWER
SUPPLY
Line Voltage
EasylTM Solo Typical
Network
1
2
If a DMX device contains a termiunless it is at either end of the DMX
network.
If a DMX device is at either end of
the DMX network and does not have
a termination switch, then install a
120 ohm 2W resistor across data +
and -, or add a DMX terminator to the
end device.
EZ SOLO
+24VDC
NO TERMINATION
ON MIDDLE
FIXTURES
EASYL DMX
CONTROLLER
DMX
LUMINAIRE
APPLY
TERMINATION
HERE
DMX
LUMINAIRE
DMX
LUMINAIRE
DMX 512
NETWORK
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 03/07/16
Part No. EZ-PRO-01 rev A
APPLY
TERMINATION
HERE
3 of 6
The DMX 512 Daisy Chained netw
Easyl T ouch | Pro 120/277
ork requires:
Without Auxillary Button Stations or Easyl RTS
BLACK (120V)
ORANGE (277V)
H
N
RED
BLA
CK
WHITE
EZ PS
120/277
+24VDC
COMMON
N
O
BLACK
CAP OFF
WHITE AND
YELLOW WIRES
N
O
RED
WHITE
YELLOW
NETWORK
TERMINATION SWITCH
N
O
NETWORK SWITCH
N
O
DETACHABLE
POWER AND DATA
PIGTAIL HARNESS
Easyl Touch/Pro Typical Network
DMX 512 NETWORK:
APPROVED SHIELDED and TWISTED PAIR,
PLUS COMMON WIRE
DMX COMMON
BLACK
BLACK/WHITE STRIPE
EZ TOUCH/
EZ PRO
(BACK VIEW)
DMX DATA +
DMX DATA DMX SHIELD
YELLOW/
BLACK STRIPE
TO EARTH
GROUND ONLY
IN STATION
SNAP ON FERRITE CORE FILTER
(2 PROVIDED) ON "DMX DATA +"
AND "DMX DATA -"
EASYL
POWER
SUPPLY
Line Voltage
+24VDC
NO TERMINATION
ON MIDDLE
FIXTURES
EASYL DMX
CONTROLLER
DMX
LUMINAIRE
APPLY
TERMINATION
HERE
DMX 512
NETWORK
DMX
LUMINAIRE
DMX
LUMINAIRE
APPLY
TERMINATION
HERE
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 03/07/16
Part No. EZ-PRO-01 rev A
4 of 6
Easyl T ouch | Pro 120/277
The DMX 512 Daisy Chained network requires:
With Button Stations
Black (120V)
Orange (277V)
H
N
EZ PS
120/277
MIDDLE OF
NETWORK NO
TERMINATION
RED
BLA
CK
White
+24VDC
+24VDC
RED
COMMON
TO
WALL
STATIONS
N
O
BLACK
WALLSTATION DATA+
WALLSTATION DATA -
END OF NETWORK
TERMINATION APPLIED
(DEFAULT)
N
O
WHITE +
YELLOW -
WALLSTATION SHIELD
TO EARTH GROUND
ONLY IN STATION
BACKBOX
WALLSTATION NETWORK
N
O
The wallstation network requires:
N
O
NETWORK
TERMINATION SWITCH
DMX 512 NETWORK:
NETWORK SWITCH APPROVED SHIELDED and TWISTED PAIR,
PLUS COMMON WIRE
DETACHABLE
POWER AND DATA
PIGTAIL HARNESS
DMX COMMON
BLACK
EZ TOUCH/
EZ PRO
(BACK VIEW)
BLACK/WHITE STRIPE
DMX DATA +
YELLOW/
BLACK STRIPE
SNAP ON FERRITE CORE FILTER
(2 PROVIDED) ON "DMX DATA +"
AND "DMX DATA -"
DMX DATA DMX SHIELD
TO EARTH
GROUND ONLY
IN STATION
EASYL
POWER
SUPPLY
Line Voltage
Easyl Touch/Pro with Remote Stations
Typical Network
+24VDC
EASYL
RB
APPLY
TERMINATION
HERE
EASYL
RB
EASYL
WORKSTATION
NETWORK
NO TERMINATION
ON MIDDLE
FIXTURES
EASYL DMX
CONTROLLER
DMX
LUMINAIRE
APPLY
TERMINATION
HERE
APPLY
TERMINATION
HERE
DMX
LUMINAIRE
DMX
LUMINAIRE
DMX 512
NETWORK
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 03/07/16
Part No. EZ-PRO-01 rev A
APPLY
TERMINATION
HERE
5 of 6
EASYL FEATURE COMPARISON
Easyl Features
SOLO
SOLO TOUCH
PRO
Preprogrammed shows, rainbow feature, chase feature
Yes
Yes
Yes
On-screen manual color select with favorites store & recall
Yes
Yes
Yes
On-screen master intensity slider
Yes
Yes
Yes
On-screen master speed control slider
Yes
Yes
Yes
Compatible with DMX512 and RDM fixtures
Yes
Yes
Yes
Configure on-screen logo and screen saver
Yes
Yes
Yes
Edit all shows through LCD Interface
Yes
Yes
Basic show editing through LCD (complex features accessible in software through internal USB port)
Standalone only, no remote stations
Yes
Yes
Operates with EZ RB 1-9 Button wallstations
Yes
Astronomic time clock (play show, set color, turn off, last command takes precedence)
Yes
Yes
Astronomic time clock with advanced control (play show, set color, remote touchscreen or wallstation disable)
Yes
Computer based software for multi area show creation (Easyl Studio)
Yes
Allow temporary “overide” and returns to previously playing show
Yes
TM
EASYL
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 03/07/16
Part No. EZ-PRO-01 rev A
6 of 6
Open as PDF
Similar pages