ST 1800-A22
Deutsch
English
Français
Italiano
Español
Português
Nederlands
Dansk
Svenska
Norsk
Suomi
Ελληνικά
Magyar
Polski
Русский
Česky
Slovenčina
Hrvatski
Slovenščina
Български
Română
Türkçe
‫ﻋﺮﺑﻲ‬
日本語
한국어
繁體中文
中文
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
de
en
fr
it
es
pt
nl
da
sv
no
fi
el
hu
pl
ru
cs
sk
hr
sl
bg
ro
tr
ar
ja
ko
zh
cn
1
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
2
3
4
5
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
6
7
8
9
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
10
11
12
13
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
ST 1800-A22
de
Original-Bedienungsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
en
Original operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
it
Istruzioni originali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
pt
Manual de instruções original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
56
fr
es
nl
da
sv
no
fi
Mode d'emploi original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual de instrucciones original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Originele handleiding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
22
44
67
Original brugsanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
Original bruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98
Originalbruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
88
Alkuperäiset ohjeet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
el
Πρωτότυπες οδηγίες χρήσης . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
pl
Oryginalna instrukcja obsługi
hu
ru
Eredeti használati utasítás
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Оригинальное руководство по эксплуатации . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
cs
Originální návod k obsluze
hr
Originalne upute za uporabu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
sk
sl
bg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Originálny návod na obsluhu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Originalna navodila za uporabo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Оригинално Ръководство за експлоатация
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
ro
Manual de utilizare original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
ar
‫ ﺩﻟﻴﻞ ﺍﻻﺳﺘﻌﻤﺎﻝ ﺍﻷﺻﻠﻲ‬. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
tr
ja
ko
zh
cn
Orijinal kullanım kılavuzu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
オリジナル取扱説明書 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
오리지널 사용설명서 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
原始操作說明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
原版操作说明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
1 Information about the documentation
1.1 Explanation of signs used
1.1.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to slight personal
injury or damage to the equipment or other property.
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
Instructions for use and other useful information
Forward / reverse
Rated speed under no load
Revolutions per minute
Revolutions per minute
1.1.3 Illustrations
The illustrations in these operating instructions are intended to convey a basic understanding and may differ
from the actual version of the product:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions.
The numbering in the illustrations reflects the order of the work steps in the illustration and may
deviate from the numbering of work steps in the text.
Item reference numbers are used in the overview illustration. In the product overview section, the
numbers shown in the legend relate to these item reference numbers.
1.2 Information about the documentation
▶
▶
▶
Read these operating instructions before the product is used or operated for the first time. This is a is a
prerequisite for safe, trouble-free handling and use of the product.
Observe the safety instructions and warnings printed in this documentation and on the tool.
Always keep the operating instructions with the tool and make sure that the operating instructions are
with the tool when it is given to other persons.
We reserve the right to make changes. Errors excepted.
1.3 Product information
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product and its ancillary equipment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
•
▶
Make a note of the designation and serial number printed on the identification plate in the following table.
Always quote this information when you contact a Hilti representative or Hilti Service to make en enquiry:
12
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
Product information
Cordless metal screwdriver ST 1800­A22
Generation
Serial no.
01
2 Safety
2.1 Safety instructions
The safety rules given in the following section contain all general safety rules for electric tools which, in
accordance with the applicable standards, require to be listed in the operating instructions. Accordingly,
some of the rules listed may not be relevant to this electric tool.
2.1.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
▶ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
▶ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
▶ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
▶ Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
▶ Prevent unintentional starting. Ensure the switch is in the off‐position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on invites accidents.
▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
13
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
▶
If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
▶ Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
▶ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
▶ Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
▶ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
▶ Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
▶ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
▶ Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
Battery tool use and care
▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
▶ Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
▶ When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
▶ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
2.1.2 Drill/driver safety warnings
▶
Hold power tool by insulated gripping surfaces, when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
2.1.3 Additional safety instructions
Personal safety
▶ Tampering with or modification of the power tool is not permitted.
▶ Wear ear protectors. Exposure to noise can cause hearing loss.
▶ Keep the grips dry, clean and free from oil and grease.
▶ Activate the safety lock (forward/reverse switch in the middle position) before making adjustments
to the tool, before fitting accessory tools, the side handle or depth gauge and when storing and
transporting the tool.
▶ Do not lift or carry the tool by the accessories attached to it.
▶ To reduce the risk of injury, use only genuine Hilti accessories and accessory tools.
▶ Observe the national health and safety requirements.
▶ Improve the blood circulation in your fingers by relaxing your hands and exercising your fingers
during breaks between working.
▶ The power tool is not intended for use by inexperienced persons who have received no special
training.
▶ Keep the power tool out of reach of children.
14
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
▶
▶
Avoid touching rotating parts. Switch the power tool on only after bringing it into position at the
workpiece. Touching rotating parts, especially rotating tools or other accessories, may lead to injury.
Dust from material such as paint containing lead, some wood species, minerals and metal may
be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory
diseases among operators or bystanders. Certain kinds of dust such as oak and beech wood dust
are classified as carcinogenic, especially in conjunction with additives for wood conditioning (chromate,
wood preservative). Material containing asbestos may be worked on only by specialists. Use a dust
removal system that is as effective as possible. To achieve a high level of dust collection, use a
suitable vacuum cleaner of the type recommended by Hilti for wood dust and/or mineral dust and
which is designed for use with this tool. Ensure that the workplace is well ventilated. Observe
national regulations applicable to the materials you intend to work with.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present. External metal parts of the power tool
may become live, for example, when an electric cable is damaged accidentally. This presents a serious
risk of electric shock.
Work area
▶ If the work involves breaking right through, take the appropriate safety measures at the opposite
side. Parts breaking away could fall out and / or fall down and injure other persons.
Use and care of battery-powered tools
▶ Do not expose batteries to high temperatures, the direct heat of the sun, and keep them away
from fire. There is a risk of explosion.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over
80°C (176°F). This presents a risk of fire, explosion or injury through contact with caustic substances.
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Never continue to use or attempt to charge damaged batteries, e.g. batteries with cracks, broken
parts, bent or pushed-in / pulled-out contacts).
▶ Do not use the battery as a power source for other unspecified power tools or appliances.
▶ If the battery is too hot to touch it may be defective. Allow the battery to cool in a place where there
is no risk of fire. Check that there are no flammable materials nearby. Contact Hilti Service.
3 Description
3.1 Overview of the product 1
@
;
=
%
&
(
Chuck
Protective cap
Torque adjustment
Power tool / accessory interface (snap-on
connection)
Pressure transfer surface
Grip
)
+
§
/
:
∙
Lockbutton
Release button with additional function
(charge status display activation)
Control switch
Forward / reverse switch
Depth gauge
Depth gauge adjustment
3.2 Intended use
The product described is a hand-held cordless screwdriver for fastening profile metal sheets, metal sheets
and sandwich panels in metal construction. The product is designed for driving and removing self-drilling
and self-tapping screws in appropriate materials and material thicknesses.
It is possible to use a stand-up tool for driving collated screws.
▶
▶
Use only Hilti Li­ion batteries of the B 22 series with this product.
Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Metal construction screwdriver, ST­DG 19 depth gauge, ST­DC protective cap, S­NSD 8 screwdriving bit,
operating instructions.
Note
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Center or online at: www.hilti.com
15
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
3.4 Li­ion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
Meaning
3 LEDs light.
•
4 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is ready for use.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
•
Charge status: 75 % to 100 %
•
Charge status: 25 % to 50 %
Charge status: 50 % to 75 %
•
Charge status: 10 % to 25 %
•
Charge status: < 10 %
•
The battery has overheated.
•
The power tool is overloaded or has overheated.
Note
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
4 Technical data
4.1 Cordless metal screwdriver
Rated voltage
21.6 VDC
Rated speed under no load
2,000 rpm
Socket/bit drive
1
Weight in accordance with EPTA procedure
01/2003
Torque
2.5 kg
12 Nm
/4″ hex. socket with locking ring
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure. The data given represents the main applications of the electric tool.
However, if the electric tool is used for different applications, with different accessories or is poorly maintained,
the data may vary. This may significantly increase exposure over the total working period. An accurate
estimation of exposure should also take into account the times when the tool is switched off, or when it is
running but not actually being used for a job. This may significantly reduce exposure over the total working
period. Prescribe additional safety measures to protect the operator from the effects of noise and/or vibration,
such as: maintaining the tool and accessories, keeping the hands warm, reorganization of work patterns.
Noise emission values determined in accordance with EN 60745
Sound (power) level (LWA)
81 dB(A)
Emission sound pressure level (LpA)
70 dB(A)
Uncertainty for the sound power level (KWA)
Uncertainty for the sound pressure level (KpA)
3 dB(A)
3 dB(A)
Total vibration (vector sum of three directions), measured in accordance with EN 60745
Screwdriving (an)
Uncertainty for screwdriving (K)
16
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
0.5 m/s²
1.5 m/s²
5 Operation
Inserting the battery
WARNING
Risk of injury! Inadvertent starting of the impact screwdriver.
▶
2
Before fitting the battery, check that the cordless impact screwdriver is switched off
and that the forward/reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Electrical hazards! Risk of short circuiting.
▶
Before inserting the battery, check to ensure that the battery terminals and the contacts
in the impact screwdriver are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶
A falling battery may present a risk of injury to yourself and others. Check that the
battery is securely seated in the power tool.
Note
Make sure that the outer surfaces of the battery are clean and dry before inserting the
battery in an approved battery charger.
Fitting / removing the depth gauge (optional)
3
Setting the depth gage (accessory)
4
Note
When driving screws with a sealing washer, use a depth gauge suitable for the diameter
of the sealing washer (accessory). When the depth gauge is correctly adjusted the screw
seal will be correctly compressed.
The depth gauge is attached to the metal construction screwdriver by way of a snap-on
connection and can be simply pulled off or pushed on.
Using the protective cap
Note
When the depth gauge is not fitted, the guard protects the depth gauge holder from dirt
and damage.
Fitting / removing the accessory tool
CAUTION
Risk of injury. The accessory tool may be hot or have sharp edges.
▶
5
6
Wear protective gloves when using the power tool and when changing accessory tools.
Note
After fitting the drill bit, grip it and pull it in order to check that it is securely engaged.
Fitting / removing the screw guide (optional)
7
Setting forward or reverse rotation
8
Note
Use of the Hilti ST-SG 5.5/6.5 screw guide is recommended for sandwich panel screws.
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the middle position
(safety lock).
Setting the torque
Safe operation
WARNING
Electric shock A fastener coming into contact with a concealed electric cable may result
in electric shock.
▶
9
10
Never use the depth gauge or chuck as a gripping area.
Note
Always hold the tool by the grip and/or with the hands on plastic parts of the casing (inline grip).
17
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
Switching on
Note
The metal construction screwdriver must be pressed lightly against the working surface
as it will otherwise not start (for safety reasons). The running speed can be controlled
smoothly right up to maximum speed by varying how far the control switch is pressed in.
Switching on in sustained operating mode
11
Switching off after sustained operation
12
Note
The lockbutton can be pressed in while the control switch is pressed. The metal construction screwdriver then runs in sustained operating mode. The lockbutton makes the tool
less tiring to use as the control switch does not have to be constantly pressed.
Note
In order to be able to switch off from sustained operating mode quickly at any time, keep
your hand close to the control switch. Pressing the control switch again causes the lockbutton to jump back into its original position.
Removing screws
Note
Remove the depth gauge or screw guide, if fitted. Set the forward / reverse switch to the
“Reverse” position.
Removing the battery
13
6 Care of the metal construction screwdriver
WARNING
Electrical hazards! Improper repairs to electrical parts may lead to serious injuries.
▶
▶
▶
▶
▶
Electrical parts may be repaired only by trained electrical specialists.
Keep the product, especially its grip surfaces, clean and free from oil and grease. Do not use
cleaning agents containing silicone.
Never operate the product when the air vents are blocked. Clean the air vents carefully using a dry brush.
Do not allow foreign objects to enter the interior of the product.
Clean the outside of the product at regular intervals with a slightly damp cloth. Do not use a spray, steam
pressure cleaning equipment or running water for cleaning.
Clean the connection end and the chuck at regular intervals.
6.1 Care of the lithium­ion batteries
Note
Keep the battery clean and free from oil and grease.
Clean the outer surfaces with a slightly damp cloth at regular intervals. Do not use cleaning agents
containing silicone.
To achieve maximum battery life, stop drawing power from the battery as soon as a significant drop
in the performance of the power tool is noticed.
Battery discharge is stopped automatically before the battery cells suffer damage.
6.2 Transport and storage
Transport
CAUTION
Inadvertent starting during transport. Uncontrolled starting during transport may occur if the battery
is fitted, thereby resulting in damage to the tool.
▶
•
•
Always remove the battery before transporting the tool.
Remove the battery.
Transport the tool and battery individually packaged.
18
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
•
•
Never transport batteries in bulk form (loose, unprotected).
Check tools and batteries for damage before use after long periods of transport.
Storage
CAUTION
Inadvertent damage caused by defective battery. A leaking battery may damage the tool.
▶
•
•
•
•
Always remove the battery before storing the tool.
Store the tool and battery in a place that is as cool and dry as possible.
Never store batteries in direct sunlight, on heating units or behind a window pane.
Store the tool and batteries in a place where they cannot be accessed by children or unauthorized
persons.
Check the tool and batteries for damage before use after long periods of storage.
7 Troubleshooting
▶
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
7.1 The metal construction screwdriver is not operational.
Trouble or fault
The metal construction
screwdriver doesn’t start.
The control switch can’t be
pressed, i.e. the switch is
locked.
The battery is not heard to
engage.
LED 1 blinks.
The screwdriver doesn’t work
and all four LEDs blink.
Possible cause
The battery is not fully inserted.
The battery is discharged.
Action to be taken
▶
▶
Push the battery in until it
engages with an audible click.
Charge the battery.
Electrical fault.
▶
The forward / reverse switch is in
the middle position.
▶
Push the forward / reverse
switch to the left or right.
The retaining lugs on the battery
are dirty.
▶
The battery is discharged.
Clean the retaining lugs and
push the battery in until it
engages. Contact Hilti Service
if the problem persists.
▶
The battery is too hot.
▶
The battery is too cold.
▶
The product is overloaded (application limits exceeded).
▶
Switch the metal construction
screwdriver off immediately,
remove the battery, keep it
under observation, allow it
to cool down and contact
HiltiService.
Charge the battery.
Bring the battery to the recommended operating temperature.
Bring the battery to the recommended operating temperature.
Release the control switch and
then press it again. Reduce the
load on the tool.
7.2 The metal construction screwdriver is operational.
Trouble or fault
Speed of rotation drops considerably.
The metal construction
screwdriver or battery gets
very hot.
Possible cause
The battery is discharged.
Electrical fault.
Action to be taken
▶
Charge the battery.
▶
Switch the metal construction
screwdriver off immediately,
remove the battery, keep it
under observation, allow it
to cool down and contact
HiltiService.
19
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
Trouble or fault
The screw is pressed too
tightly against the surface.
The screw is not pressed
tightly enough against the
surface.
The screwdriver runs but the
screw can’t be driven.
Possible cause
The depth gauge is set incorrectly.
Action to be taken
▶
Turn the depth gauge to the
right.
The depth gauge is set incorrectly.
▶
Turn the depth gauge to the left.
The wrong direction of rotation is
set.
▶
Set the forward/reverse switch
to the desired direction of
rotation.
8 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implementation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶
Disposal of electric tools or appliances together with household waste is not permissible.
8.1 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶
▶
▶
Improper disposal of the equipment may have the following consequences: The burning of plastic
components generates toxic fumes which may present a health hazard. Batteries may explode
if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution. Careless disposal may permit unauthorized and improper use of the
equipment. This may result in serious personal injury, injury to third parties and pollution of the
environment.
Dispose of defective batteries right away. Keep them out of reach of children. Do not disassemble
or incinerate the batteries.
Batteries that have reached the end of their life must be disposed of in accordance with national
regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implementation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶
Disposal of electric tools or appliances together with household waste is not permissible.
9 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
20
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
10 EC declaration of conformity
Manufacturer
Hilti Aktiengesellschaft
Feldkircherstrasse 100
9494 Schaan
Liechtenstein
We declare, on our sole responsibility, that this product complies with the following directives and standards.
Designation
Type designation
Cordless metal screwdriver
ST 1800­A22
Generation
01
Applicable directives:
•
•
•
•
•
2004/108/EC (up to April 19, 2016)
2014/30/EU (as of April 20, 2016)
2006/42/EC
2006/66/EC
2011/65/EU
Applicable standards:
•
•
EN 60745-1, EN 60745-2-2
EN ISO 12100
Technical documentation filed at:
•
Year of design
2010
Electric Tools Approval Department
Hilti Entwicklungsgesellschaft mbH
Hiltistraße 6
86916 Kaufering
Germany
Schaan, 12/2015
Gunnar Wald
Lars Taenzer
(Head of Quality, Business Unit Installation Systems) (Head of BU Direct Fastening)
21
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
Printed: 23.12.2015 | Doc-Nr: PUB / 5070713 / 000 / 04
439718
*439718*
Hilti = registered trademark of Hilti Corp., Schaan
Pos. 1 | 20151130
Open as PDF
Similar pages