Enhanced
Connectivity
Ease of use
Configuration
SW Tool
ACR4™
technology
Smart focus
adjustment
IDENTIFICATION
DS4800
APPLICATIONS
ADVANTAGES
• Automated warehousing
• Reading on pallets
• Picking systems
• Automated shop floor
• Items and parts tracking
• Process control systems
• Outdoor application (Subzero models)
• Frozen industry (Subzero models)
• Cold Storage Environments
• Performance optimization and extended reading area through smart focus adjustment
• DIGITECH™ technology permits full software control over signal processing parameters. Scanner setup can therefore be optimized simply loading optimized software recipes, thus enabling excellent performance in all reading conditions
• Improved reading rate on low contrast barcodes and excellent performance at high skew angles
• ACR4™ reconstruction technology increases the maximum tilt angle and overall read rate on damaged barcodes
• Overall cost reduction and simple network wiring thanks to ID-NET™ high-speed connectivity
• Extended Fieldbus and Ethernet connectivity through a complete range of modular connection boxes and accessories
• Subzero versions extended operating temperature range -35 +50 °C
www.datalogic.com
DS4800
HIGHLIGHTS
GENERAL DESCRIPTION
• Smart Focus adjustment for flexible reading area selection
• DIGITECH™ technology allows
excellent reading performance
• ACR4™ reconstruction technology improves reading of damaged barcodes
• Linear and Oscillating Mirror versions
• X-PRESS™ interface for easy and intuitive scanner setup
• Easy setup through multilanguage Genius™ software tool
• ID-NET™ embedded interface for high-speed communication networks
• Multilanguage display improves scanner monitoring and diagnostics
• Total ambient light immunity thanks to high frequency laser modulation
• IP65 rugged industrial housing
• Subzero version for low temperature environments
DS4800 features excellent reading performance satisfying all main
identification needs of manufacturing plants, especially in automated
shop floor and automated warehousing applications.
Through smart focus adjustment, DS4800 allows to optimize
the reading performance based on reading distance. Thanks to
DIGITECH™ technology and optimized reading recipes, DS4800
provides excellent reading performance on low quality and low contrast
barcodes as well as at high skew angles.
DS4800 is equipped with the innovative X-PRESS™ Human Machine
Interface, granting easy scanner installation and maintenance. This
interface clearly presents status and diagnostic information by means
of a five LED bar graph, while the single multi-function key gives
immediate access to relevant functions such as Test Mode, Auto Setup,
Auto Learn and Focus Adjustment.
Thanks to subzero models, DS4800 can operate smoothly down to
-35°C. Internal heater and de-frost window heater assures correct
operation anywher in the allowed -35 + 50 °C range.
With its rugged construction, IP65 protection class, 0 to 50°C operating
temperature range temperature and total ambient light immunity,
DS4800 is the ideal product for industrial applications.
www.datalogic.com
DS4800
READING DIAGRAMS
DS4800-1000
Focus Distance 30 cm / 11.81 in (Near)
DS4800-1000
Focus Distance 40 cm / 15.75 in (Medium)
CONDITIONS
CONDITIONS
DS4800-1100
Focus Distance 40 cm / 15.75 in (Medium)
CONDITIONS
Code
=
Code 128
Code
=
Code 128
Code
=
Code 128
PCS
=
0.90
PCS
=
0.90
PCS
=
0.90
Pitch angle
=
0°
Pitch angle
=
0°
Pitch angle
=
0°
Skew angle
=
15°
Skew angle
=
15°
Skew angle
=
15°
Tilt angle
=
0° to 30°
Tilt angle
=
0° to 30°
Tilt angle
=
0° to 30°
* Scan Speed
=
800 scans/sec.
* Scan Speed
=
800 scans/sec.
* Scan Speed
=
800 scans/sec.
* Reading Condition
=
Standard
* Reading Condition
=
Standard
* Reading Condition
=
Standard
* Reading Mode
=
Linear
* Reading Mode
=
Linear
* Reading Mode
=
Linear
* Parameter selectable in Genius™
* Parameter selectable in Genius™
* Parameter selectable in Genius™
DS4800-1000
DS4800-1100
DS4800-1100
Focus Distance 60 cm / 23.62 in (Far)
CONDITIONS
Focus Distance 30 cm / 11.81 in (Near)
CONDITIONS
Focus Distance 60 cm / 23.62 in (Far)
CONDITIONS
Code
=
Code 128
Code
=
Code 128
Code
=
Code 128
PCS
=
0.90
PCS
=
0.90
PCS
=
0.90
Pitch angle
=
0°
Pitch angle
=
0°
Pitch angle
=
0°
Skew angle
=
15°
Skew angle
=
15°
Skew angle
=
15°
Tilt angle
=
0° to 30°
Tilt angle
=
0° to 30°
Tilt angle
=
0° to 30°
* Scan Speed
=
800 scans/sec.
* Scan Speed
=
800 scans/sec.
* Scan Speed
=
800 scans/sec.
* Reading Condition
=
Standard
* Reading Condition
=
Standard
* Reading Condition
=
Standard
* Reading Mode
=
Linear
* Reading Mode
=
Linear
* Reading Mode
=
Linear
* Parameter selectable in Genius™
* Parameter selectable in Genius™
* Parameter selectable in Genius™
www.datalogic.com
DS4800
DIMENSIONS
LINEAR MODELS
OSCILLATING MIRROR MODELS
mm / inch
www.datalogic.com
DS4800
ELECTRICAL CONNECTIONS
All DS4800 models are equipped with a cable terminated by a 25-pin male D-sub connector for connection to the power supply and input/
output signals.
25-pin Female D-sub Connector
25-PIN D-SUB MALE CONNECTOR PINOUT
Pin
Name
Function
13,9
VDC
Power supply input voltage +
25,7
GND
Power supply input voltage -
1
CHASSIS
Cable shield connected to chassis
18
I1A
External Trigger A (polarity insensitive)
19
I1B
External Trigger B (polarity insensitive)
6
I2A
Input 2 A (polarity insensitive)
10
I2B
Input 2 B (polarity insensitive)
8
O1+
Output 1 +
22
O1-
Output 1 -
11
O2+
Output 2 +
12
O2-
Output 2 -
20
RX
Auxiliary Interface RX
21
TX
Auxiliary Interface TX
23
ID+
ID-NET™ network +
24
ID-
ID-NET™ network -
14,15,16,17
Pin
NC
RS232
2
3
4
5
Main Interface Signals
(SW selectable)
Not Connected
RS232
RS485 Full-Duplex
RS485 Half-Duplex
TX
TX+
RTX+
RX
* RX+
RTS
TX-
CTS
* RX-
RTX-
* Do not leave floating, see DS4800 Reference Manual for connection details.
www.datalogic.com
DS4800
MODELS AND ACCESSORIES
MODELS
Order No.
Description
931061318
DS4800-1000 ADJ FOCUS, LINEAR
931061321
DS4800-1100 ADJ FOCUS, OSCILLATING MIRROR
931061322
DS4800-1005 ADJ FOCUS, LINEAR, SUBZERO
931061325
DS4800-1105 ADJ FOCUS, OSC. MIRROR, SUBZERO
ACCESSORIES
Order No.
Description
3ACC1837
BK-4000 L-SHAPE BRACKET (5 PCS)
3ACC1838
BK-4001 U-SHAPE BRACKET (5 PCS)
TECHNICAL DATA
MODELS
DS4800-100X
DS4800-110X
Dimensions
101 x 85 x 42 mm (3.97 x 3.33 x 1.65 in)
117 x 123 x 48 mm (4.60 x 4.84 x 1.89 in)
Weight
580 gr. (20.46 oz.)
780 gr. (27.9 oz.)
Case material
Aluminum
Operating temperature
0 to 50 °C (32 to 122 °F)
Storage temperature
-35 to 50 °C (-31 to 122 °F) for subzero models
Humidity
90% non condensing
Vibration resistance
IEC 68-2-6 test FC 1.5mm; 10 to 55 Hz; 2 hours on each axis
Shock resistance
IEC 68-2-27 test EA 30 G; 11 ms; 3 shocks on each axis
Protection class
IP65
Light source
Visible laser diode (630 to 680 nm)
Ambient light rejection
30000 LUX
Scanning speed
600 to 1000 scan/s
Resolution
Up to 0.20 mm (8 mils)
Reading distance
Up to 1000 mm on 0.50 mm (20 mils) barcodes
Depth of field
Up to 600 mm on 0.50 mm (20 mils) barcodes
Aperture angle
50 degrees
Readable codes
Code 2/5, Code39, Code93, Code128, EAN/UPC, EAN128, Codabar, Pharmacode, Plessey, ISBT128
Multilabel reading
Up to 10 different symbologies during the same reading phase
Main port RS232/RS422/RS485 up to 115.2 Kbit/s
Communication interfaces
Auxiliary port RS232 up to 115.2 kbps
Connectivity modes
Pass Through, Master/Slave, Multiplexer
ID-NET™ port up to 1 Mbps
Digital inputs
Two SW programmable, optocoupled, NPN/PNP
Digital outputs
Two SW programmable, event driven, optocoupled
Device programming
Windows™ based SW (Genius™) via serial link
Operating modes
‘On-line’, ‘Serial On-line’, ‘Automatic’, ‘Continuous’, ‘Test’, ‘Verifier’
X-PRESS™ Human Machine Interface
Serial Host Mode Programming sequences
X-PRESS™ Human Machine Interface
User interface
Programmable Push Button, LEDs (Status, Com, Trigger, Good, Ready, Power On)
Display
16 x 2 characters
Laser classification
IEC 825-1 Class2; CDRH Class II
Laser control
Safety system to turn laser off in cases of motor slowdown or failure
Motor control
Motor On/Off command string and Motor Speed SW programmable
DS4800-1000
DS4800-1005
DS4800-1100
DS4800-1105
Power supply
10 to 30 VDC
24 Vdc ± 10%
10 to 30 VDC
24 Vdc ± 10%
Power consumption
6W
28.8 W
7.5 W
32 W
www.datalogic.com
Open as PDF
Similar pages