LANtest Pro
The LANtest Pro is a small hand held tester that enables the user to
quickly read the status of Ethernet twisted pair cables. It tests for faults
such as open circuit, shorts, crossed pairs, reversed pairs and split pairs
in seconds. The Tone Generator function can send a signal through your
installed cables and the probe can then trace to locate the fault.
The LANtest Pro/IDT includes one master unit and four remote units
easily operated by one person testing patch cords or installed cables.
Features
• Tests for wiring faults of open, short, reversal, crossed and split pairs
• Split pair fault detection at minimum 40cm cable length
• Verification of shield integrity
• Specially designed remote units that enables one person to test
installed cables
• Easy to read fault display and high speed testing
• Debug mode for detailed fault identification results
• Auto sleep mode and power off switch to decrease power consumption
• Low battery indicator
Specifications
• Model No.: 256652
• Display: LED
• Connector type: RJ45
• Operating temp.: 0 to 40ºC
• Storage temp.: –20 to 60ºC
• Humidity: 95% relative humidity (non–condensing)
• Master weight: 124 x 55 x 30mm
• Remote weight: 29 x 55 x 22mm
• Power source: 1.5V AAA x 4
Order Information
256652A/TFK LANtest Pro and Probe kit with noise filter
256652A/TK LANteset Pro and Probe kit
256652AT LANtest Pro with Tone Generator
256652A LANtest Pro without Tone Generator
256652A/IDT LANtest Pro + 4 Remotes
Open as PDF
Similar pages