Complete Guide - Tri-County Communications


The Remote
IPTV Middleware Version 7.0 Page 5


Playback Controls
Your remote control offers standard capabilities, as well as enhanced remote control buttons that function
similarly to DVD controls.
Here’s what each button does:
List Select to see a list of recorded programs. Press the LIST button a second time
to see what is scheduled to be recorded. Press LIST a third time to access your Series
Rules.
Live Select to return to the current part of a live broadcast.
Skip Forward Skip forward 30 seconds while watching a recording or live TV.
Skip Back Skip backward ten seconds while watching a recording or while
watching live TV.
Play Begin or resume watching a recording. Also display/remove the status bar.
Fast Forward Fast forward through parts of a recording. Press multiple times to
go forward faster.
Record Record a program
Pause Pause the program you are currently watching. While paused, the FastForward button will play the program frame by frame in slow motion.
Stop Stop watching a recording or stop a recording that is in progress.
Rewind Rewind through parts of a recording. Press multiple times to rewind faster.
Guide Access the program Guide. Press a second time for alternate view.
S
E
A
R
C
H
B
R
Arrows/Browse/Search/OK Press to navigate through the guides, menu options
O
or to make selections.
W
S
IPTV Middleware Version 7.0 Page 6
E

PROGRAM YOUR REMOTE CONTROL
This remote control is already pre-programmed to control your Set Top Box
(STB). The instructions below will program this remote to control your TV.
1. Manually turn ON the TV that
you want to setup on the
remote
2. Press and Hold
until the
TV key blinks twice
3. Press and release the TV key.
The TV key will stay lit.
4. Find your TV and brand from
the chart below and note the
DIGIT key assigned to your
brand. Press and hold down
the DIGIT key for your
device/brand while pointing
the remote to the device.
5. Let go of the key when your
device turns OFF. Setup for
that device is complete.
To program this remote control to
your other devices
,
see the instructions below the
table.
PROGRAMMING DEVICE CONTROL
The Potenza ST Universal Remote Control is preprogrammed to operate the set-top box provided by your
television service provider, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To
control devices other than the default brands, perform the following steps; otherwise skip this section.
1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
NOTE: Please read steps 2 through 5 completely before proceeding. Highlight or write down the codes
and device you wish to program before moving on to step 2.
2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or STB ); it will blink once.
3. Press and hold SETUP until the selected mode key blinks twice, then release SETUP .
4. Use the “Manufacturer’s Codes” starting on page 17) to locate the type of device and brand name and then
enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 4 and
try entering the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not,
repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not
respond, try searching for the code (see “Searching for Your Code” on page 9).
NOTE: If the device does not have a POWER key (e.g., DVD and VCR) , press the (Play) key.
6. Repeat steps 1 through 5 for each device you want the remote control to operate. For future reference, write
down each working device code in the boxes below.
Codes to try: ___________ ___________ ___________ ___________ ___________ ___________
**IMPORTANT**
After programming your TV to the remote (using Quick Guide instructions or long form
instructions with 4-digit code) please follow these final steps for progamming the POWER
button on your remote so your Cable Box stays on and only your TV turns off at night (this is
recommended for proper operation of the Cable Box).
PROGRAMMING MASTER POWER KEY
The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to
five of your home entertainment devices on or off with a single key press.
Note: The Master Power (POWER) only works in STB mode. If it is not programmed, only the
set-top box will turn on or off. In any other mode, pressing Master Power (POWER) once will
turn the selected device on or off.
Programming the Master Power Key
1. Press and hold SETUP key until the last device key blinks twice.
2. Enter 9 9 5 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly
3. Press POWER once.
4. Press TV key.
5. Press and hold SETUP key until the last device key blinks twice (3 seconds). To
play back the power sequence, press the POWER key while in STB mode.
SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/VCR Combo or a TV/DVD Combo, you need to follow special steps to set it up.
Perform the following instructions to control combo device:
1. For a TV/VCR Combo, turn on your TV/VCR Combo and insert a video cassette. (For a TV/DVD Com bo, inser t
a DVD).
2. On the remote control, press
VCR once; it will blink once. Then press and hold SETUP until the VCR
key blinks twice.
3. Use the “Manufacturer’s Codes” starting on page 17 to locate the brand name and enter the first four-digit code
for your combo device (for example, TV/VCR). If you perform this procedure correctly, the VCR key w ill blink
twice.
NOTE: If the VCR key did not blink twice after entering the codes last digit, repeat steps 2 through 3
and try entering the same code again. If you’ve located a setup code that works for your combo device (for
example, a TV/VCR Combo) and a separate TV code is also listed, you’ll need to program this code into
the remote control to access volume control ( see “Programming Device Control” starting on page 8).
4. Aim the remote control at your combo device (for example, TV/VCR Combo) and press POWER once. The
device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until
you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting
on page 9).
5. For future reference, write down each working device code in the boxes below:
TV Code
TV/VCR Code
TV/DVD Code
Device Type:
Code
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the Potenza ST Universal Remote Control after trying all of the
codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a
code for your TV:
1. Turn on your TV.
2. On the remote control, press
TV once; it will blink once. Then press and hold SETUP until the TV key
blinks twice.
3. Type 9 9 1 . The TV key will blink twice.
4. Aim the remote control at the TV and press POWER once.
5. Press and release the
CH+ key continuously, then stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device,
starting with the most popular code first.
6. Press
POWER . The TV should turn on, then press SETUP once to lock in the code. The LED will blink
twice to indicate that the code is saved.
NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through 9
the codes, then press SETUP when the TV turns on.
7. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g.,
TV, AUD, DVD, AUX, or STB ) for the device you are searching for.
PROGRAMMING MASTER POWER KEY
The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to
five of your home entertainment devices on or off with a single key press.
Note: The Master Power (POWER) only works in STB mode. If it is not programmed, only the
set-top box will turn on or off. In any other mode, pressing Master Power (POWER) once will
turn the selected device on or off.
Programming the Master Power Key
1. Press and hold SETUP key until the last device key blinks twice.
2. Enter 9 9 5 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly
3. Press POWER once.
4. Press TV key.
5. Press and hold SETUP key until the last device key blinks twice (3 seconds). To
play back the power sequence, press the POWER key while in STB mode.
Clearing the Master Power Key
1. Press and hold SETUP key until the last device key blinks twice.
2. Enter 9 9 5 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly
3. Press POWER key and release.
4. Press and hold SETUP key until the STB key blinks twice (3 seconds).
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control capabilities are not locked to the set-top box
mode. However, you can activate the feature to lock these keys to the STB Mode. This will
guarantee you do not inadvertently change a channel on your TV or VCR.
The affected keys are 1 through 0, CH+, CH-, and LAST.
Locking Channel Control (to a Source Mode)
1. Press and hold SETUP key until it blinks twice.
2. Enter 9 7 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press the CH+ key and release.
4. Press the STB device key to lock channel control to the STB mode.
*Default channel control lock is in unlocked state.
Un-Locking Channel Control
1. Press and hold SETUP key until it blinks twice.
2. Enter 9 7 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press the CH- key and release.
*Default channel control lock is in unlocked state.
PROGRAMMING VOLUME LOCK
Volume Lock allows you to control the volume through the device identified as having your
primary speakers(s), regardless of which mode you are using. On the Potenza ST Remote by
default the global volume Lock is set to TV, so you can control TV volume while in the TV, DVD,
AUX, or STB mode. The volume lock feature is programmable. Perform individual Volume
Unlock on a selected device to set its volume control for independent operation.
NOTE: The audio mode’s (AUD) volume controls are active regardless of Volume Lock settings. However, if you
lock the volume controls to the AUD mode, you will control the audio device’s volume in all other modes (i.e. TV,
DVD, AUX, or STB). This can be an advantage if, for example, you always listen to home entertainment devices
through your device’s speakers.
Programming Global Volume Lock
The user can globally lock the volume controls to one source mode (Device Key):
1. Press and hold SETUP key until the device key blinks twice.
2. Enter 9 9 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press VOL + key and release.
4. Press Device Key you want to be the master audio source (TV, AUD).
Programming Global Volume Unlock
The user can reset the volume controls to that one source mode:
1. Press and hold SETUP until the device key blinks twice.
2. Enter 9 9 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
3. Press VOL - key and release.
Programming Single-Device Volume lock
1. Press the desired Device Key (TV, AUD) to lock the volume to and release.
2. Press and hold SETUP key until it blinks twice.
3. Enter 9 9 3 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.
4. Press the Device Key (STB, TV, AUD) that you want to have the volume control locked
to the device selected in step 1.
5. Press SETUP and release.
Note: The last selected device LED will blink 2 times if programming sequence is entered correctly.
Note: After you select a device that has volume unlocked (i.e. STB), pressing VOL+, VOL-, or Mute, will control only that
device’s volume.
CHECKING THE CODES
If you have set up your remote control by searching for your device code (previous section), you may need to find out
which four-digit code is operating your equipment. For example, to find out which code is operating your TV:
1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks
twice.
2. Enter
9 9 0 . The TV key will blink twice.
3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks =
3) and write down the number in the left most TV Code box above.
NOTE:
If a code digit is 0, the selected mode key will not blink.
4. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4
for the fourth digit. Finish writing down the code in the TV Code boxes above
5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., TV, AUD,
DVD, AUX, or STB ) for the device you are checking. Write down the codes in the appropriate boxes above.
USING LEARNING
The Potenza ST Universal Remote Control includes a Learning feature (not available on all models) so you can add
functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down).
However, there are some considerations.
Learning Precautions
• Your original remote controls must be in working order for learning to work properly.
• Learned keys are mode-specific, so each one can store a unique function for each mode.• Do not use the following
keys for learning:
Device Keys, SETUP, Record (•), Tune-In Keys .
• Learning capacity is approximately 16 to 25 keys, depending on the code being learned.
• Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other
unusual formats.
• For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent
lights.
• Please have your original remote controls NOTE: handy before programming learning.
Programming a Learned Key
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold
SETUP until the last-selected mode key blinks twice, then press 9 7 5 .
NOTE: If the LED displays one long flash instead, either your batteries are low, or the Potenza ST
Universal Remote Control has a memory fault.
2. Press a mode key once (i.e., TV, AUD, DVD, AUX, or STB ) to assign a mode for learning.
3. Press the desired key on the Potenza ST once to store the feature to be learned.
4. Place the Potenza ST Remote Control head-to-head (about 2" apart) from your original remote control . Also
locate the key (on your original remote control) that you want the Potenza ST Universal Remote Control to learn.
5. On the original remote, press and hold the key to be learned. The Potenza ST Remote Control’s LED will blink
10
rapidly, then turn off. Continue holding the key on the original remote until the LED blinks twice.
NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again
until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit
programming and review the “Learning Precautions” on the previous page. If needed, also see
“Troubleshooting” on page 15. After review, start programming again at step 1.
6. Repeat steps 2 through 5 for another mode and/or key or press and hold SETUP until the active mode key LED
blinks twice to exit programming.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you select. You can also delete learned
programming by teaching a different function to the key (see “Programming a Learned Key” on page 10)
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6 .
2. Press a mode key once (i.e., TV, AUD, DVD, AUX, or STB ). The LED on the selected mode key will blink
once.
3. Press the key containing the learned function to be deleted twice. The active MODE key will blink twice.
4. Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6 .
2. Press a mode key twice (i.e., TV, AUD, DVD, AUX, or STB ) to clear all the learned keys for that mode. The
mode key LED blinks twice.
3. Repeat step 2 for another mode or press and hold SETUP to exit programming.
11
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 8).
PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an
infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for
full operation (see page 9).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing Volume Lock” on page 12.
PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter.
SOLUTION: Re-program the STB key for cable code 0476 (see “Programming Device Control” on page 8).
PROBLEM: Tried Search Method and still could not find a working code.
SOLUTION: Try the Search Method again after clearing out the device key as follows:
a. Press and hold SETUP until device key blinks twice.
b. Enter 9 9 2 .
c. Press and release the device key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV
code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In
order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is
15
Final Brand Setup Code List – Potenza ST
###### Setup Codes For Audio - Amplifier (A) ######
Anthem
2220
Classé
1915
Denon
2134, 2706
Halcro
1934
Harman/Kardon 3045
Krell
2463
Marantz
2138, 2463
Parasound
1934
###### Setup Codes For Cable Set Top Box (C) ######
ADB
2254
Amino
1898
Cisco
1877
Motorola
1376
Pace
1877, 1376
Pioneer
1877
Samsung
1877
Scientific Atlanta 1877
###### Setup Codes For Audio - Accessory (M) ######
Acoustic Research
2226
Altec Lansing
2251
Apple
1115
Definitive Technology 3645
Denon
2502
Dynavox
3231
Haier
3516
Harman/Kardon
3517
iLive
3175
Jamo
2228
JBL
3535
JVC
3049
LG
3217
Martin Logan
3526
Onkyo
3326
Panasonic
3409
Philips
2675
Polk Audio
2228, 3429
Proficient
3661
Roku
1828
Samsung
2660
Sharp
3097
Sony
2610
Version 1.0
(August 2013)
SpeakerCraft
Toshiba
VIZIO
Yamaha
ZVOX
3661
3627
2454
2021, 2116
2332, 2334
###### Setup Codes For Video - Accessory (N) ######
ABS
1272
Alienware
1272
Apple
2615
CyberPower
1272
D-Link
3671, 1554, 1731, 2186
Gateway
1272
Hewlett Packard
1272
Howard Computers 1272
Hush
1272
iBUYPOWER
1272
Iomega
2558
LG
3373
Linksys
1272
Logitech
3272
Magnavox
3339
Media Center PC
1272
Microsoft
2049, 1272
Mind
1272
Netgear
3324, 3292, 2033, 2036
NiveusMedia
1272
Northgate
1272
Popcorn Hour
2260
RCA
3335
Ricavision
1272
Roku
3061, 2371
Seagate
2698
Sony
2713, 1272
Stack 9
1272
Systemax
1272
Tagar Systems
1272
Toshiba
1272
Touch
1272
Viewsonic
1272
VIZIO
3670
Voodoo
1272
Western Digital
2558
Xbox
2049
ZT Group
1272
Version 1.0
(August 2013)
###### Setup Codes For Audio - Receiver (R) ######
Aiwa
0158, 0189, 0121, 1089, 1641
Altec Lansing
2595
AMC
1077
Anam
1609
Apex Digital
1774
Arcam
1189, 0189
Audiotronic
1189
Bose
1933, 1629, 1229, 1841, 1253
Carver
1189, 0189, 0121, 1089
Coby
1263, 1389, 2698, 2748
Curtis
1389
Denon
2857, 1360, 2516, 2820, 2279, 3001, 3347, 3380, 2247, 1142
Dynex
2971
Fisher
1801
Garrard
0463
Gateway
1517
Glory Horse
1263
GPX
3214
Harman/Kardon 2241, 1304, 2443, 0110, 0189, 0891, 1306, 2670, 3418
Hitachi
1801
iLive
2013
Insignia
2169, 2175, 1030, 1077, 2472, 1751, 1893, 2126, 2474, 2929, 2966
Integra
1805, 1320, 2503, 2730, 0135
iSymphony
2442
JBL
2241, 0110, 1306
JVC
1676, 2239, 1374, 3115, 2331, 0074, 1263, 1495, 1871, 2040
Kenwood
1313, 1570, 1293, 0186
Klipsch
3092
LG
2197, 2676, 2284, 1293
Linn
0189
Magnavox
1189, 1269, 0189, 1089, 1831
Marantz
1189, 1269, 0189, 1089, 1289, 2114
McIntosh
1289
Micromega
1189
Musicmagic
1089
Myryad
1189
Nakamichi
1313
NexxTech
1751
Norcent
1389, 1751
Nova
1389
Onkyo
1805, 2730, 1320, 2503, 2451, 1531, 0135
Optimus
1023, 0186
Panasonic
2967, 1633, 2452, 1763, 1548, 1275, 1288, 3309, 3055, 2745, 1764,
2221, 1308, 1518, 1676, 2105, 1316
Version 1.0
(August 2013)
Philips
Pioneer
Polk Audio
Proscan
RadioShack
RCA
Rio
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
Sonic Blue
Sony
Stereophonics
Sunfire
Teac
Technics
Thorens
Toshiba
Victor
Wards
Yamaha
Zenith
2459, 2311, 0189, 1831, 1269, 1189, 0891, 1266, 1089
1935, 2612, 1123, 1023, 1384
0189, 1289, 2244, 2270
1254
1263
1609, 1023, 1254, 2041, 2426, 2611, 2655, 2719, 3281, 3297, 0054,
1123
1869
1868, 2809, 1295, 2713, 3154, 1500, 2137, 1304
0189, 1089
1469, 1801
0186
1263
1077, 1517, 1653, 1905, 2169
1869
1622, 1759, 0158, 2172, 1758, 1822, 2475, 1058, 2522, 3257, 3372,
1441, 1258, 1158, 1858, 1658, 2216, 1558, 2671, 3456
1023
1313
0463
1633, 1308, 1518
1189
1123, 1788
0074
0158, 0189, 0054
2061, 2467, 3030, 0176, 1276, 0376, 1331, 1815, 3313, 3580, 1375,
1376, 2455, 0186, 3267, 3270, 3626
2197, 1293, 1869
###### Setup Codes For Satellite Set Top Box (S) ######
Ballard Rural Telephone Cooperative 0775
Bell
0775
City of Cawker City Cable
0775
Country Vision Cable
0775
DirecTV
1377
Dish Network
0775
Dishpro
0775
Echostar
0775
Frontier Communications
0775
GOI
0775
HTS
0775
Hughes Network Systems
1377
Humax
1377
JVC
0775
Milestone Communications
0775
Qwest
1377
Version 1.0
(August 2013)
Samsung
Satellite Operations
TDS Telecom
Teleview Communications
Telus
Triangle Communication System
United Satellite America
United States Wireless
USA Wireless Satellite TV
Windstream
World Satellite Cable Systems
1377
0775
0775
0775
0775
0775
0775
0775
0775
0775
0775
###### Setup Codes For Television (T) ######
Acer
1339
Admiral
0093, 0463
Advent
1570
Affinity
3716, 3717
Aiko
0092
Aiwa
1362
Akai
0812, 0702, 1675, 0765, 1385
America Action
0180
Anam
0180
AOC
1589, 2087, 1365, 1590, 2014, 2479, 3707, 3720
Aomni
1623
Apex Digital
2397, 0748, 0879, 0765, 1217
Astar
1548, 1738
Asus
3340
Audiovox
1564, 0451, 0180, 0092, 1276, 1766, 1769, 1865, 1868,
2121, 2413, 3065
Auria
2087, 2277
Aventura
0171
Bell & Howell
0154
Berkshire
0047
Bradford
0180
Broksonic
0463, 1938
Candle
0056
Carver
0054
Celebrity
0000
Celera
0765
Champion
1362
Changhong
0765
Citizen
0060, 0092, 0056
Clarion
0180
Coby
3478, 3627, 2315, 2344, 2306, 2314, 2326, 2338, 2340,
2345, 2347, 2348, 2560, 3629, 1538
Commercial Solutions
1447, 0047
Version 1.0
(August 2013)
Concerto
Contec
Craig
Crosley
Crown
Curtis
Curtis Mathes
CXC
Cytron
Daewoo
Dell
Denon
Digital Lifestyles
Disney
Dumont
Durabrand
Dynex
Electric Mirror
Electroband
Electrograph
Electrohome
Element
Elite
Emerson
Emprex
Envision
Epson
ESA
Fisher
Fluid
Fujitsu
Funai
Futuretech
Gateway
GE
GFM
Gibralter
Go Video
GoldStar
GPX
Grunpy
Haier
Hallmark
Hannspree
0056
0180
0180, 3423
0054, 0000
0180
2397, 3577, 2352, 2466, 2855, 3228, 1326
0702, 0054, 0093, 0060, 0047, 0154, 0451, 0145, 1661,
0056, 1347, 1959
0180
1326
1661, 0661, 0092, 0154, 0451
1264, 1080, 1863, 2491
0145
1765
1665, 1892
0017
0178, 0171, 0463, 0180, 1665
2049, 1463, 1785, 1810, 2184
3166
0000
1755, 1623
0463, 1570, 1670
1886, 1687, 2183, 2964, 3559
1457
1864, 1394, 1886, 0171, 0178, 0154, 0451, 0463, 0180,
1661, 1665, 1913, 1944, 1963, 2183, 2776, 3559
1765
1589, 2087, 1365, 2014
1122
0812, 0171, 1944, 1963
0154, 1362
2964
0809
0000, 0171, 0180, 1271, 1904, 1963
0180
1756, 1755
1447, 0178, 0047, 0051, 0451, 0765, 1347, 1547
1864, 1886, 0171, 1665, 1963
0017
1823, 1831
0178, 0056
3196
0180
1753, 1749, 2309, 1748, 3382, 1570, 2293
0178
1348, 1351, 2786
Version 1.0
(August 2013)
Harley Davidson
Harman/Kardon
Harvard
Havermy
Hello Kitty
Hewlett Packard
Hisense
Hitachi
iLo
Infinity
Initial
Insignia
Inteq
iSymphony
JBL
JCB
JCM
Jensen
JVC
KDS
KEC
KLH
Konka
KTV
Lasonic
LG
Lloyd's
LodgingStar
Luxman
LXI
MAG
Magnasonic
Magnavox
Marantz
Matsushita
Maxent
MB Quart
Megatron
Memorex
MGA
1904
0054
0180
0093
0451, 2776
1642
3519, 2183, 0748, 1314, 1660, 2098
1643, 0145, 1145, 0056, 0679, 1576, 1904, 2756
1394, 1463, 1286, 1665, 1684, 1990
0054
1990
2049, 1641, 1326, 1564, 1423, 2002, 1785, 1892, 2184,
2417, 2751, 0171, 0463, 2088, 1963, 1660, 1517, 1385
0017
3094, 3118, 3382
0054
0000
2256
1326, 2541
, 1774, 1601, 2271, 2264, 0053, 0650, 0463, 0731, 1253,
1670, 1923, 2321
1498, 1687
0180
0765
1385, 1831
0180
3198
1423, 2731, 2358, 2424, 0178, 3397, 1265, 2834, 3098,
2612, 0017
1904
3147
0056
0156, 0054, 0178, 0047, 0154
1498, 1687
1913
1867, 1454, 1455, 2597, 2372, 1866, 0054, 0171, 0706,
1365, 1904, 1913, 1944, 1963, 1990, 2902, 3708, 1755,
0051
1454, 0054, 1398
0250, 0650
1755, 1757
1868
0178, 0145
0463, 0178, 0154, 0150, 1570, 1665, 1670, 1785, 1892,
1924, 1927, 1938
0178, 0150
Version 1.0
(August 2013)
Midland
Mintek
Mitsubishi
Motorola
MTC
Multitech
NAD
Naxa
NEC
NetTV
Nexus Electronics
Nikko
Norcent
Norwood Micro
NTC
NuVision
Ölevia
Onwa
Optimus
Optoma
Optonica
Orion
Panasonic
PARK
Penney
Philco
Philips
Pioneer
Planar
Polaroid
Portland
Prima
Prism
Proscan
Proton
Proview
Pulsar
Quasar
RadioShack
RCA
Realistic
0047, 0017, 0051
1990
1250, 0150, 1797, 0093, 0178
0093
0060, 0056
0180
0156, 1156, 0178, 0056
2104, 3154, 3382
0056, 1398, 1704, 1797, 2293
1755
2183
0178, 0092
1589, 0748, 1365, 1590
1286
0092
1657, 2158
1610, 1144, 1240
0180
0250, 0650, 0154, 1913, 1924, 1927
1348
0093
0463, 1463, 1938, 3540
1480, 1291, 0250, 0650, 2264, 1927, 1924, 1947, 0051,
1941, 1310, 1271, 1946
2104
0156, 0178, 0060, 0047, 0051, 1347
1394, 0054, 0171, 1271, 1665, 1963
1454, 1867, 2372, 1744, 1455, 2374, 2597, 1866, 0690,
0054, 2704, 1394, 0171, 1365, 1944, 1990, 2902
1457, 0679, 1260, 1398
1589
1523, 1498, 0765, 1276, 1286, 1314, 1326, 1385, 1538,
1687, 1766, 1767, 1769, 2002, 2121
0451, 0092, 1661
1753, 1749, 1785
0051
1447, 0047, 1347, 2147, 2183, 2256, 3577
0178
1498, 1687
0017
0250, 1291, 0650, 0051, 1924, 1927
0178, 0047, 0154, 0180, 0056, 1904
1447, 2746, 2434, 2932, 2247, 2187, 0047, 1781, 0093,
3577, 3147, 2855, 2002, 1959, 1547, 1385, 1347, 0679,
0051, 1661, 0090
0178, 0154, 0180, 0056
Version 1.0
(August 2013)
RevolutionHD
Runco
Sampo
Samsung
Sansui
Sanyo
Sceptre
Scotch
Scott
Sears
Seiki
Seleco
Sens
Sharp
Sheng Chia
Sherwood
Sigmac
Signature
Solé
Sony
Soundesign
Soyo
Spectroniq
Squareview
SSS
Starlite
SunBriteTV
Superscan
Supersonic
Supreme
SVA
Sylvania
Symphonic
Syntax
Tandy
Tatung
TCL
Technics
Techwood
Teknika
Telefunken
Thomas America
TMK
TNCi
1623
0017, 1398
1755
2051, 0812, 0702, 0060, 1060, 0766, 0814, 1959, 2596,
0650, 0178, 0056
0171, 0463, 1463, 1670, 1892, 1904, 1938, 3540, 3564
1142, 0154, 1362, 0054, 0088
0878, 1217, 1360, 1599, 2337, 2506, 2528
0178
0178, 0180
0156, 0054, 0178, 0047, 0171, 0154, 0056, 1904
0178, 2964, 3559, 3560
1351
1865
2360, 0818, 0093
0093
1399, 3061
3423, 3477
0054
1623
0810, 0000, 1300, 0834, 1685, 1904
0178, 0180
1831
1498, 1687
0171
0180
0180
1610, 2337, 2528, 2935
0864, 0093, 1944
1753, 2104, 3154, 3593
0000
0748, 1963
1864, 1394, 1886, 0171, 1944, 1963, 1271, 0054, 1314,
1665, 1913, 3563
1394, 0171, 0180, 1904, 1913, 1944
1610, 1144, 1240
0093
1756, 1286
2434, 3183
0250, 0051
0051, 0056
0054, 0060, 0180, 0150, 0092, 0056
0702, 0056
1904
0178, 0056
0017
Version 1.0
(August 2013)
Toshiba
TruTech
TVS
US Logic
Venturer
Victor
Vidikron
Vidtech
Viewsonic
Viore
VisionQuest
Vivitek
VIZIO
Wards
Waycon
Westinghouse
White Westinghouse
Wyse
Zenith
1524, 1656, 2724, 0156, 1156, 0822, 1256, 2006, 0060,
0154, 1265, 2684, 1959, 1945, 1704, 0650, 1369
1665, 1723, 2066
0463
1286
1865, 1868
0053
0054, 1398
0178
2087, 2014, 2049, 0864, 1755, 1564, 0885, 1330, 1365,
1542, 1578, 1627, 2277, 3706
1684, 2104, 2352, 3094, 3118, 3382
3380
1369
1758, 3758, 2757, 3358, 2512, 1756, 0864, 0885
0156, 1156, 0054, 0000, 0178, 0060, 0047, 0154, 0017,
0051, 0180, 0056, 1347
0156
1712, 3579, 0885, 3382, 1300, 1577, 3094, 3470, 0889,
1282, 2293, 0451, 1217
0463, 1661
1365
1423, 0017, 2358, 2731, 0000, 0178, 0047, 0463, 1265,
1145, 0145, 0092, 1661, 1365, 1904, 2612
###### Setup Codes For Video - VCR (V) ######
Accurian
0000
Admiral
0048
Adventura
0000
Aiwa
0037, 0000
Allegro
0039
American High
0035
Audiovox
0037
Calix
0037
Canon
0035
Carver
0081
Citizen
0037
Craig
0037
Crosley
0081, 0000
Curtis Mathes
0060, 0035, 0162
Daewoo
0045
Denon
0042
DirecTV
0739
Durabrand
0039
Dynatech
0000
Electrohome
0037, 0043
Version 1.0
(August 2013)
Electrophonic
Emerex
Emerson
Fuji
Funai
Garrard
GE
GFM
GoldStar
Gradiente
Harley Davidson
Harman/Kardon
Headquarter
Hitachi
Hughes Network Systems
Humax
Instant Replay
JVC
KEC
Kenwood
Kodak
Lloyd's
LXI
Magnasonic
Magnavox
Marantz
Marta
Matsushita
MEI
Memorex
MGA
Minolta
Mitsubishi
Motorola
MTC
Multitech
NEC
Nikko
Olympus
Optimus
Panasonic
Penney
Pentax
Philco
Philips
0037
0032
0037, 0000, 0043, 0593, 1593
0035, 0033
0000, 0593, 1593
0000
0060, 0035, 0202
1593
0037, 1237
0000
0000
0081
0046
0000, 0042, 0593
0042
0739
0035
0067
0037
0067
0035, 0037
0000
0037
0593
0035, 0039, 0081, 0000, 0593, 1593
0035, 0081
0037
0035, 0162
0035
0035, 0162, 0037, 0048, 0039, 0000,
0046, 1237
0043
0042
0067, 0043
0035, 0048
0000
0000
0067
0037
0035
1062, 0162, 0037, 0048, 0593
1062, 0035, 0162, 0616
0035, 0037, 0042, 1237
0042
0035
0739, 0035, 0081
Version 1.0
(August 2013)
Pilot
Pioneer
Polk Audio
Presidian
Proscan
Pulsar
Quarter
Quartz
Quasar
RadioShack
Radix
Randex
RCA
Realistic
ReplayTV
Runco
Samsung
Sanky
Sansui
Sanyo
Scott
Sears
Sharp
Signature
Sonic Blue
Sony
STS
Sylvania
Symphonic
Tashiko
Teac
Technics
Teknika
Thomas America
TiVo
Toshiba
Totevision
Vector
Video Concepts
Videomagic
Villain
Wards
XR-1000
Zenith
0037
0067
0081
1593
0060, 0202
0039
0046
0046
0035, 0162
0000
0037
0037
0060, 0035, 0042, 0202
0035, 0037, 0048, 0000, 0046
0616
0039
0045
0048, 0039
0000, 0067
0046
0045, 0043
0035, 0037, 0000, 0042, 0046, 1237
0048, 0848
0035
0616
1232, 0032, 0035, 0033, 0000, 0636
0042
0035, 0081, 0000, 0043, 0593, 1593
0000, 0593, 1593
0037
0000
0035, 0162
0035, 0037, 0000
0000
0739, 0636
0045, 0043
0037
0045
0045
0037
0000
0060, 0035, 0048, 0039, 0081, 0033,
0045, 0000, 0042, 0046
0035, 0000
0037, 0039, 0033, 0000
Version 1.0
(August 2013)
###### Setup Codes For Video - DVD (Y) ######
Accurian
0675, 1416
Anthem
2820
Apex Digital
0672, 0717, 0755, 0794, 0797, 1004, 1020, 1056, 1061
Arrgo
1023
Audio Authority
2555
Audiovox
0717
B&K
0655
BBK
1224
Bel Canto Design
1571
Blaupunkt
0717
Blue Parade
0571
Broksonic
1419
California Audio
0490
Labs
Cambridge Audio
2808
Cinea
0831
CineVision
0833
Citizen
2116
Coby
2494, 0778, 0852, 1086, 1107, 1165, 1351
Craig
0831
Curtis
2235, 3401, 3403
CyberHome
0816, 1023, 1129, 1502
Daewoo
0705, 0833, 1234, 1242
Denon
2258, 1634, 2748, 0490
DigitalMax
1738
Digix
3850
Disney
0675, 1270, 3246
Dual
1068
Durabrand
1023, 1127
Dynex
2596
Electrohome
2116
Emerson
0675, 2213
Fisher
0670
Funai
0675
Gateway
1158
GE
0522, 0717
GFM
0675
Go Video
1075, 0741, 0744, 0833, 1044, 1158
GoldStar
0741
GPX
2235
Greenhill
0717
Grundig
0539, 0705
Harman/Kardon
0702, 1229, 2927, 0582, 3228
Hello Kitty
0831
Hitachi
0573, 0664
Version 1.0
(August 2013)
Hiteker
Humax
Initial
Insignia
Integra
Irradio
JBL
JVC
Kenwood
KLH
Lenoxx
Lexicon
LG
LiteOn
Loewe
Magnavox
Marantz
McIntosh
Memorex
Messiah
Entertainment
Microsoft
Mintek
Mitsubishi
NAD
Naxa
Nesa
Norcent
Nyko
Ölevia
Onkyo
Oppo
Panasonic
Philco
Philips
Pioneer
Polaroid
Polk Audio
Presidian
Pro Vision
Proceed
Proscan
RCA
RE-BL
Rotel
0672
1500, 1588
0717
2095, 2596, 2428, 0675, 0741
2147, 0627, 0571, 1769, 1634
0646
0702
1164, 0623, 2365, 1602, 0558, 0867, 1275, 2855, 3025
0534, 0490
0717, 1020, 1149
1127
2545
0741, 1602
1058, 1158, 1416, 1738
0511
0675, 0539, 0646, 1354, 1506, 0503
2414, 0539, 2481, 3444
1273, 1533
2213, 0831, 1270, 2331, 3153
2396
2083, 0522
0717
1521
0741
2235
0717
1003, 1107
2340
2331
2147, 1627, 0627, 0503, 1769, 2215, 2562
2545, 0575, 1224, 2185
1641, 0490, 3641, 1579, 1762, 0703, 0503
0675
2056, 0539, 2434, 0646, 2084, 1354, 0503, 0675, 1158, 1267,
1340, 1506
2442, 0142, 1571, 0571, 0525, 0631, 1512, 2854
1020, 1061, 1086
0539
0675, 1738
0778
0672
0522
0522, 2213, 0571, 2919, 2587, 1500, 0717, 1769
2555
0623
Version 1.0
(August 2013)
Samsung
Sanyo
Schneider
Sensory Science
Sharp
Sherwood
Shinsonic
Sony
Sylvania
Symphonic
Technics
Theta Digital
TiVo
Toshiba
Urban Concepts
Viore
VIZIO
WB Electronics
Xbox
Yamaha
Zenith
0199, 0573, 2069, 1075, 1573, 1470, 2329, 2369, 2113, 1044,
2269, 2489, 2556, 3492, 0490
0670, 0873
0646
1158
2250, 0630, 0675, 1419
1043, 3052, 3925
0533
1516, 1633, 0533, 1033, 1533, 0864, 1070, 0772, 1536, 1540
0675
0675
0490, 0703
0571
1503
2705, 0503, 3157, 2277, 1510, 1608, 1154, 1588, 1503, 1769
0503
2553
2563, 1226
2555
0522, 2083
0497, 2298, 0539, 0490, 0646, 0545, 0817, 1354, 1416, 3995
0503, 0741
**IMPORTANT**
After programming your TV to the remote (using Quick Guide instructions
or long form instructions with 4-digit code) please follow these final steps
for progamming the POWER button on your remote so your Cable Box
stays on and only your TV turns off at night (this is recommended for
proper operation of the Cable Box).
PROGRAMMING MASTER POWER KEY
The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to
five of your home entertainment devices on or off with a single key press.
Note: The Master Power (POWER) only works in STB mode. If it is not programmed, only the
set-top box will turn on or off. In any other mode, pressing Master Power (POWER) once will
turn the selected device on or off.
Programming the Master Power Key
1. Press and hold SETUP key until the last device key blinks twice.
2. Enter 9 9 5 and release.
Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly
3. Press POWER once.
4. Press TV key.
5. Press and hold SETUP key until the last device key blinks twice (3 seconds). To
play back the power sequence, press the POWER key while in STB mode.
Open as PDF
Similar pages