ENIGMA User Manual - Mega Systems, Inc.

ENIGMA User Manual
Mega Systems Inc., Ltd. Co.,Ltd.
The pictures and data in the user manual are reference only, check the real
product please!
CONTACT US
Address:5718 Kenwick St, San Antonio, TX 78238
Tel:210-684-2600
Fax:210-855-6279
EMail:info@megasystemsinc.com
WebSite:www.megasystemsinc.com
Revision
Format
Time
ECO#
Description
Principal
1.0
2010-1-15
0000
Release
Lisa
CONTENT
1.0 Safety ........................................................................................... 1
2.0 Specification .................................................................................. 2
2.1 Parameters............................................................................... 2
3.0 Connection .................................................................................... 4
3.1 ENIGMA Back Panel ................................................................... 4
3.2 How to install ........................................................................... 6
4.0 Front Panel Keyboard Operation........................................................ 7
4.1 ENIGMA Operator Guideline ........................................................ 7
4.2 Video Processor Menu ................................................................ 9
5.0 Communication Software Guideline ..................................................15
5.1 Install Software .......................................................................15
5.2 Run ENIGMA Console ................................................................19
6.0 FAQ .............................................................................................29
6.1 No output in target display ........................................................29
6.2 VGA input could not work with ENIGMA Console ...........................29
6.3 DVI input could not work with ENIGMA ........................................29
6.4 Component input could not work with ENIGMA .............................30
6.5 User settings can not save.........................................................30
6.6 Can’t update main board software ..............................................30
7.0 Quick Start ...................................................................................31
7.1 Single-screen control ................................................................31
7.2 How to control processor with console software by USB?................33
7.3 How to Use LINSN Ledset software?............................................37
8.0 Appendix ......................................................................................39
8.1 AppendixⅠDownload the IP software ..........................................39
8.2 Appendix Ⅱ How to add tasks. ...................................................41
1.0 Safety
The general safety information in this summary is for operating person. Any
requirement, please feel freely to contact our service engineer.
Power Source
This product is intended to operate from a power source
between 85~265 volts rms . This product is only workable under
correct power condition, which is already mark on the back panel
of the power.
High Voltage
There are many high voltage components inside.
Do not Remove Covers and Panels
Do not remove Covers in any conditions. There are not any
spare components inside for maintenance, so do not maintain
this product by userrselves, any requirement, please feel free to
contact our service engineer. Keep heavy device from power
cord.
Grounding the Product and Use the Proper Fuse
This product is grounded through the grounding conductor of
the power cord. To Avoid electrical shock, plug the power cord
into a properly wired receptacle before connecting to the product
input or output terminals.
Keep away from Magnet, Motor, TV and Transformer.
Guard Against Damp
Keep using inside clean and dryness environment, once the
device get wet, must remove power cord right now.
Keep away Exploder
Do not operate the device inside dangerous and easy
explosive gas, which it may make fire, blast or something without
expectation.
Keep away Pour Liquid and Fragment
It is forbid to pour liquid, metal fragment or anything else
inside this device to avoid fire and other accident. Once that
happens, must remove power cord and try to make it clean
before power on again.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
1
2.0 Specification
ENIGMA video processors are designed by the latest high performance image
processing technology. ENIGMA can handle following video without limit,
include CVBS(Composite)、S-Video (YC)、YCbCr、YPbPr、RGBHV(VGA)、
DVI-D、HDMI、SDI(SD-SDI、HD-SDI) and VOIP(Copper RJ45).
2.1 Parameters
Composite BNC Input
Number of Inputs
3
Supported Standards
PAL/NTSC; 480i,576i
Signal Level
1Vpp±3db (0.7V Video+0.3v Sync ) 75ohm
S-video DIN4 Input
Number of Inputs
1
Supported Standards
PAL/NTSC; 480i,576i
Signal Level
Y:1Vpp±3dB
(0.7V Video+0.3v Sync ) 75ohm
U/V:0.7Vpp±3dB 75ohm
YPbPr BNC Input
Number of Inputs
BNC*3
Supported Standards
Anologue HD Input
480i,576i,480p,576p,720p50,720i60,1080i50,1080p50
1080i50,1080i60
Signal Level
Y:1Vpp±3dB
(0.7V Video+0.3v Sync ) 75ohm
Pb/Pr:0.7Vpp±3dB 75ohm
VGA DB15 Input
Number of Inputs
1
Connector
Standard DB15 socket
Supported Standards
VGA-UXGA;
1024×768×60, 800×600×60, 640×480×60
R、G、B、Hsync、Vsync:0 to1Vpp±3dB
Signal Level
(0.7V Video+0.3v
Sync ) 75ohm
black level:300mV Sync-tip:0V
DVI Input
Number of Inputs
1
Connector
Standard DVI-I socket
Supported Resolution
SMPTE:625/25 PAL, 525/29.97 NTSC, 625/50p PAL,
525/59.94p
NTSC:1080i50,1080i59.94/60,720p50,720p59.94/60
VESA:800×600×60Hz,1024×768×60Hz,1280×768
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
2
×60Hz,1280×1024×60Hz,1600×1200×60Hz,1920
×1080×60Hz,1920×1080×50Hz
Signal Level
TMDS pwl,single pixel input,165MHz bandwidth
Standard
HDMI 1.3
SDI Input (Optional module)
Number of Inputs
1
Connector
BNC
Data Rate Range
19.4Mbps~1.5Gbps
Supported Standards
Equalization)
ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292,
SMPTE 297
Belden 1694A 100M HD1.485G,350m SD 270Mbps
Audio Input
Number of Inputs
10
Connector
Standard RCA socket
Audio Standard
48Kbps 24bit balance analog audio
DVI Output
Number of Inputs
1
Connector
Standard DVI-I Interface
Signal Level
TMDS pwl, 165MHz bandwidth
Supported Standards
VESA:800×600×60Hz,800×600×75Hz,1024×768
×60Hz,1024×768×75Hz,1280×1024×60Hz, 1920
×1080P×60Hz
VGA Output
Number of Inputs
1
Connector
Standard DB15 socket
Supported Standards
VESA:800×600×60Hz,800×600×75Hz,1024×768
×60Hz,1024×768×75Hz,1280×1024×60Hz, 1920
×1080P×60Hz
R、G、B、Hsync、Vsync:0 to1Vpp±3dB
Signal Level
(0.7V Video+0.3v
Sync ) 75ohm
black level:300mV Sync-tip:0V
Audio Output
Number of Outputs
1
Connector
Standard 1/4” socket
Audio Standard
48Kbps 24bit balance analog audio
Function
Source Switch
support every signal alpha key operation
PIP
PIP for SD with HD and HD with HD
AV Sync
supported
Extras
Communication
RS232 USB TCP/IP
Power Supply
85-264V 2A IEC-3
Working Environment
0°C~45°C
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
3
Stored Environment
10% to 90%
Product Warranty
1 year
Specifications are subject to change without notice.
3.0 Connection
3.1 ENIGMA Back Panel
1、Dial the code switch;
2 、 10/100M interface (copper RJ45). Used to connect the computer by
568B-568A twist-pair;
3、USB interface,Used to connect the computer;
4、RS232 interface (RJ11) for ENIGMA processor. Used to connect the computer;
5-14、Audio interface, support audio signals from DVD player or audio sources;
15-16、Gigabit copper port, connect to LED screen;
17、Gigabit Transmitter card power interface, not use inside case;
18、Gigabit Transmitter card USB control interface.
19、Gigabit Transmitter card DVI input,connect to DVI output of ENIGMA.
(This Connection does not support hot-plugging)
20、SDI Input BNC, used to support SD/HD SDI input。Input the video signal
from the HD player, HD projector. (SDI input is the optional module)
21-23、Composite input interface,Composite BNC. Used to input composite
signal (PAL, NTSC, SECAM compatible);
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
4
24 、 S-Video DIN 4, used to input S-Video signal ( PAL, NTSC, SECAM
compatible);
25、DVI input interface。Input the video signal from computer, DVI signal
generator. Connect to the same DVI interface on ENIGMA;
(This Connection does not support hot-plugging)
26-28、R/Pr G/Y B/Pb BNC, used to support SD/HD analog video input, up to
1080p60;
29、VGA input interface, DB-15, used to support Analog RGB input; Connect to
the VGA interface on the VSP processor.
30、AUDIO output interface2,connect to the audio player。
31、DVI output interface,connect to the monitor or LED screen which has DVI
interface. (This Connection does not support hot-plugging)
32、VGA output interface, connect to the monitor, projector and so on;
33-34、Switch and power. It must use IEC-3 power line. Always ground to avoid
electric shock.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
5
3.2 How to install
ENIGMA frame size
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
6
4.0 Front Panel Keyboard Operation
Insert power cord and push power to ON position. LCD module on the front
panel will show MEGA SYSTEM and go into self verification before it load last
setting config and send processed image to the target monitor. For the first
setup, CV1 input is default source. With front panel keyboard, user can operate
VSP with menu display on LCD module.
4.1 ENIGMA Operator Guideline
ENIGMA front panel as following:
1. LCD Module;
2. Keyboard:
ESC: push to exit from current choice item;
SEL: push to confirm the current choice item;
UP: push to select up items in LCD menu;
DOWN: push to select down in LCD menu;
LEFT:push to select the left items
RIGHT:push to select the right items
CV1:switch to composite 1 input
CV2:switch to composite 2 input;
CV3:switch to composite 3 input;
SVID:switch to SVideo;
VGA: switch to analog RGB input;
YPbPr: switch to high definition component,
DVI: Switch to DVI input
+:Switch to amplify the audio;
-:Switch to down scale the audio;
SDI: SDI input, compatible with HD/SD SDI, push to switch to SDI input;
PIP:Switch to show picture in picture on the screen. CV1 is the default
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
7
small picture on the top left corner,
DVI is the default picture with full screen.
SAVE1:switch to use the user-defined mode 1;
SAVE2:switch to use the user-defined mode 2;
SAVE3:switch to use the user-defined mode 3;
FS:switch to selet full screen or zoom view, just for single picture mode;
RATIO:switch to select aspect ratio 4:3 or 16:9;
MSA:switch to select the audio channel which send to output in multi
picture mode;
MUTE:Switch to select mute sound or return;
MENU:push to go to main menu;
FRE:push to freeze the video image or live again;(FreezeÆLiveÆFreeze)
AB: Channel Switch, only works under the PBP mode. Push it to switch between
the picture of main channel and the picture of subchannel. For instance, if
processor now works under subchannel mode, user can switch channels in
subchannel; be under subchannel mode if you push Reset button.
Note:
AB in ENIGMA doesn't support Fade-In-Out.
SCALE: push to go to between scaleÆzoomÆcropÆscale mode;
BRT:push to adjust the brightness and the contrast ratio, push to enter
to the relevant Menu, and then push the UP and DOWN to adjust the
brightness and the contrast ratio.
OUT: push to select the output format by using the UP and DOWN.
I/II: push to set single or dual channel
SAVE: push to save current config.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
8
4.2 Video Processor Menu
System menu as follows;
>ENIGMA
*Dev Info
Recall
↓
Fig. 1
The first line shows ENIGMA.
Push the right and left direction key to select the left or right menu. Before
the menu item, if there is a * sign, means the menu item has been selected,
you can push the Select key to enter it.
The ↑ on the right means you can select the menu items by pushing the up
and down direction key.
User can check the information of the equipment in “Dev Info” menu
(including the manufacturer、serial-number );
User can get more service and support according to the serial-number.
Mega Systems Inc., Ltd.
>SN:3204
User can check current input and output sources in Dev Info menu also.
Input: CV1 1024x768x60
Output: CV2 1024x768x60
Touch UP/DOWN to check System time
System time:
2009-08-17
15:12:35
User can do a Factory Settings in Recall menu, after successful reset you will
see the menu as follows:
Factory reset was completed !
Push the MENU to enter the main menu, then push up and down direction
key, the menu as follows:
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
9
>ENIGMA
*Language
Alpha
↑
Push the LEFT/RIGHT to select the relevant submenu.
LANGUAGE submenu as follows:
*LANGUAGE
>Chinese
English
Push UP/DWON to enter Alpha setup, user can set value from 0 to 100,
0 means video or graphic would be disappear and 100 means normal;
Port A and Port B stand for two channel picture;
*Alpha
Port A Value:
100
Push OUT to enter the Output menu, push the UP or DOWN to select
different output resolution, push OK to confirm the output resolution.
Advance submenu as follows:
①
ENIGMA support the minus pixel shift function, which
ENIGMA can not support;
Note:
② ENIGMA can not support pixel shift on the resolution
1920×1080P×60Hz.
Pixel shift to minus:
Press UP/DOWN and select the menu as shown in Figure 1:
>ENIGMA
*Advance
XY_Pos ↑
Figure 1
Press LEFT/RIGHT and select XY_Pos to enter the submenu of adjusting
effective area;
H_BLANK
*HS:
46
V_BLANK
*VS:
38
XY_Pos:The sub-menu of which is used to adjust the position of overall
effective area shown on the screen or monitor.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
10
H_BLANK: The overall effective area can be moved around by adjusting the
value of H_BLANK.
V_BLANK: The overall effective area can be moved up and down by
adjusting the value of V_BLANK.
Screen parameter:
Hsize:
1024
Step:user can set the step of scale;
HSize:set the horizontal size of the image;
VSize:set the vertical size of the image;
HPos:set the horizontal position of the image;
VPos:set the vertical position of the image;
User can set size and position of the screen simply, Mainly applies to LED
screens users. After setting screen parameter, the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen。
Output
>1024x768x60
Push theⅠ/Ⅱto enter Single or Dual channel menu , push the UP / DOWN to
select the single or dual channel, push SEL to confirm the single channel or dual
channel work state;
Setup
Dual
Setup
Single
Select the input channel, push the UP/DOWN, and SEL to confirm the
different input channel. User can also push the channel name on the
keyboard to go into the input channel.
Source Select
>CV1
AB in ENIGMA is used to enable channel if dual channel mode.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
11
Setup
A on B
OR:
Setup
A on B
Push SCALE to set the size and position of the image, push UP/DOWN and
SEL to confirm the relevant items;
Step:user can set the step of scale;
HSize:set the horizontal size of the image;
VSize:set the vertical size of the image;
HPos:set the horizontal position of the image;
VPos:set the vertical position of the image;
Scale
> Step
10
When shown in one single image, the ratio between the
horizontal and the vertical of the image should be equal to or
less than 3.
Note:
When shown in dual image, there is a limit of aspect ratio of the
image in the left side: The horizontal of the image in the left
side should be larger than that of the image in the right side.
This rule still need to be followed even if the images are dragged
to the opposite.
Push the FRE to freeze the live image or live the freeze image.
Freeze Frame
Once gain for live
OR:
Live Frame
Once gain for live
Push BRT to set the brightness and the contrast ratio:
ENIGMA
Brightness
50 ↓
OR:
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
12
ENIGMA
Contrast
50 ↑
Push SAVE and then push SAVE1 or SAVE2 to save the operation to SAVE1 or
SAVE2;Push SAVE1 or SAVE2 to execute relative operation after user save
the operation sucessfully.
Add prompt to save function
For ENIGMA , when user push the SAVE key, the SAVE1、SAVE2
Note:
and SAVE3 lights on the front panel will go on at the same time,
it reminds user must press SAVE1 or SAVE 2 to finish the final
save function.
Slelect Save Mode !
Push Esc To Exit
Touch FS button can realize screen switch between scale mode and full screen
mode.
Picture mode
Full Size
Picture mode
Small Size
Touch RATIO button,set screen width and height.
Size: 4:3
Size: 16:9
Size: Normal
MSA : touch the main sub-channel audio and audio channel switching
button,main channel will play sound.
Main window audio
Touch again, sub-channel will play sound.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
13
Sub window audio
MUTE:mute the equipment, shown as the picture:
Mute
Touch MUTE again will revovery to play sound.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
14
5.0 Communication Software Guideline
ENIGMA video processor is very easy to be configured with user friendly
communication software, support drag and drop operation for edit and display.
Also can customized with schedule function.
5.1 Install Software
Dual click ENIGMA.exe to install, select Chinese or English version for use,
after click “select ”to next dialog.
If user agree to install this software, please click next to go on, else click esc to
exit this install.
And in next dialog is the user agreement of the software, click agree to go on
and refuse to exit.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
15
If users agree to the agreement, user can select install directory in next
dialog, else, click next to install software to default directory “C:\Program Files”.
Click “next ”to go on.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
16
Click “next ”to go on.
Click “finish” and ready to run ENIGMA console.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
17
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
18
5.2 Run ENIGMA Console
Run ENIGMA.exe and the console will auto detect device in serial or networks by
detected Comm port and pro-define IP address.
After detect, open the device console, for example, if the device is VSP 618,
then VSP 618 console will be load, as following. Default loading is ENIGMA if can
not detect any device.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
19
Setup Communication
ENIGMA Console support COM port or Ethernet (UDP) to access ENIGMA.For the
first running ,user must click the
to close COM Port. Click
to change
the COM Port and the Baudrate.
Serial: user can make choice between existent com ports and baud rates;
default Baudrate is 9600.
Ethernet: user can fill any number less than 1023 in Local Port. The Remote Port
must be 192.168.0.100 and the Remote Port must be 1000.
Note:
Enigma Baud Rate works as 115200.
The COM Port is decided by user’s COM. Right click my computer icon on
desktop, select HardwareÆDevice Manager in the system attributes dialog. The
COM in red in the picture is the COM user can make choice.
Then click
to open COM.
ENIGMA User Manual
will display after success to
Doc. No:RGB-RD-UM-V516E014
20
connect the COM.
If ENIGMA console success to detect device in chain, the software version,
device core version, firmware version and serial number will display on the
bottom right corner of the screen.
5
How to use
Operator can check parameters by software.
: Save script. Save current user config parameters as script.
: Open script. User can open saved script.
: Import template. There are six templates for user.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
21
: Export template. Export current config as template.
: Option. User can choose open device when start and using script saved
before or execute schedule edited before when start.
If user choose open device when start, user can use last run, use script file or
none when user start. User can click
to choose which script user want to
open.
If user choose execute schedule when start, the next dialogue will display when
software run.
: Language. The software supports Chinese and English version. The
picture following is the Chinese dialogue.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
22
: Exit.
Communication
: Open COM.
: Close COM.
: Set COM.
Device
: Synchronization.
: Save to flash.
:Load form Flash.
Load user config from flash.
: Factory setup
: Advance, for adm. inistrator control.
: Execute schedule or stop schedule.
Help
: Help. Display helps dialogue.
: About.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
23
Output resolution: user can choose different output resolution by selecting
from pull down list.
Operating mode: choose to work in single channel or dual channel.
Layout: if in dual channel mode, user can set the device to work in PIP or PBP
mode directly with quick preset layout button as following.
Input: the white area display the name of input interface when the mouse is
over the interface picture on the left. The orange pane means current selected
interface.
If work in dual channel, channel 1 includes VOIP, CV1, CV2, CV3, SVideo, YCbCr,
SDI 1 and SDI 2, and channel 2 includes DVI, YPbPr, VGA, HDMI1 and HDMI 2.
The cross over interface picture means they can not access. The orange pane
means selected interface for channel 1. The blue pane means selected interface
for channel 2.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
24
Screen parameter:
User can set size and position of the screen simply, Mainly applies to LED
screens users. After setting screen parameter, the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen。
Images: User can scale the images;image 2 can’t choose in single channel
mode.
Display Toolbar:
Display toolbar Users can set Alpha value of “dynamic Video” and “static current
frame” through display toolbar.
Setting Gamma is generally not recommended, since LED large screen itself has
Gamma function.
For further information, users can contact with our customer service team.
Output: user can customize the brightness and the contrast.
Display: user can customize image or images position and size just by drag and
drop image (images) in this area. This process is sync to the parameters in
images toolbars.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
25
Log: user can save or delete the operate log file.
Added functions
z Output polarity
Normally, the polarity will set to be positive.
If the Horizontal and vertical polarity of ENIGMA equipment is different from Tx,
the polarity should be negative, or else it can not send data to the LED screen
correctly.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
26
z IP set
Users can set equipment IP, Usually used under the condition of one
computer control or remote control several computers.
z Sound
If worked under the dual-screen mode, users can select main screen sound or
sub-picture sound by clicking option box.
HDMI can transmit audio and video signals at the same time on one data line.
If users choose HDMI signal source with sound, users should choose“embedded
audio”;
If users choose HDMI signal source without sound, users can broadcast sound
through External speaker and choose” HDMI outside embedded audio”.
z Clock
Users can set or adjust lower computer time through” clock”
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
27
z Equipment Schedule function
Users can set device to work with schedule, and then device can automatically
switch between single or dual channel, resize image, switch video and with fade
effect in need.
Equipment currently supports max 10 regular content; users can set in the
“timing” option.
Specifically how to implement devising schedule function, please refer to
Appendix II.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
28
6.0 FAQ
6.1 No output in target display
1) Check the output config of the input video.
2) Check the input channel config is ok. Ex.The composite 1 interface is
connected to the composite interface of video source.
3) Check the connection of output is ok.
4) Check the target monitor or display is not destroied or power down.
5)Check the output resolution of ENIGMA is not out of the maximal resolution
of target display.
6) Check ALPHA value is not 0.
7)Any requirement, please feel free to contact our customer service engineer.
6.2 VGA input could not work with ENIGMA Console
1)Check VGA source output is ok.
2)Check VGA input resolution is not out of ENIGMA Console support list, as
following. The biggest input resolution is 1024*768*60Hz
3) Check ENIGMA Console works in VGA input mode.
4) Any requirement, please feel free to contact our customer service engineer.
6.3 DVI input could not work with ENIGMA
1) Check DVI source is ok.
2) Check DVI source output is not out of ENIGMA support list.
3) Check ENIGMA works in DVI input mode.
4) Check the connection between ENIGMA and DVI source is correct. Restart
DVI source and check output.
5) Any requirement, please feel free to contact our customer service engineer.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
29
6.4 Component input could not work with ENIGMA
1) Check the connection between ENIGMA and Component source is correct.
Especially Y signal. Refer to cabling example in page 5. High Definition
component YPbPr is only support in YPbPr input。Standard definition YCbCr
support 480i and 576i only; High Definition YPbPr support 480i、576i、480P、
576P、720P50、720P60、1080i50 and 1080i60;
2) Check component source works, normally DVD component output should be
open from its menu.
3) No recommend to output component and SVideo input from the same source.
4) Any requirement, please feel free to contact our customer service engineer.
6.5 User settings can not save
ENIGMA supports multi config mode.For multi config mode, the equipment
starts to work automatically with the SAVE1 mode.According to different
equipments,you can solve the problems that modes can’t be saved by the
following steps.
ENIGMA
Confirm to press the “SAVE” button,then press “SAVE1”,or “SAVE2”,or
“SAVE3”,that will save the current operation mode to the “user mode 1”,”user
mode 2” or ”user mode 3”; After that, push button “SAVE1”,””SAVE2,”SAVE3”,it
wil call out the corresponding set -ting of user-mode.if that,the saving is
successful.
Ater saving process, user should not do factory reset or any saving operation to
user mode 1, otherwise, “SAVE1” will be over write.
6.6 Can’t update main board software
Connect the computer and ENIGMA , select *.mot. Download file to device.
After the equipment power up, right-click the “.mot” file at the left side of menu,
when the screen shows “waiting for update”, you can update the main board
program. Next, choose the “download file to device”, start to loading.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
30
7.0 Quick Start
7.1 Single-screen control
Set screen parameters
Users can easily change the screen size and location by setting the parameters
with keyboard and LCD menu.
Press MENU to access main menu, Menu shows as below picture:
>ENIGMA
*Dev Info
Recall
↓
Press UP / DOWN button to turn the menu shown as below pictures:
>ENIGMA
*Advance
↑
Screen parameter:
Hsize:
1024
Step: Set the unit of zoom and move every time;
HSize:Set Horizontal size;
VSize:Set vertical size;
Hpos:Set horizontal coordinates(horizontal phase);
VPos:Set vertical size(vertical phase);
Scale pictures
Step:Set the unit of scale and move every time;
(Three steps available:1, 10,100)
HSize:Set horizontal size;
VSize:Set vertical size;
HPos:Set horizontal coordinates(horizontal phase);
VPos:Set vertical size(vertical phase);
Scale
> Step
10
Set alpha
Enter Alpha sub-menu can set the alpha of video, Press UP /DOWN to set the
value of alpha; Port A and Port B represent two video channels;
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
31
*Alpha
Port A Value:
100
Set brightness contrast
BRT brightness and contrast button can set brightness and contrast of active
window video shown as below pictures:
ENIGMA
Brightness
50 ↓
ENIGMA
Contrast
50 ↑
BRT brightness and contrast button can set brightness and contrast of active
window video shown as below pictures:
ENIGMA
Brightness
50 ↓
ENIGMA
Contrast
50 ↑
Freeze Frame
Press FRE static frame button can freeze, press the button can freeze current
active window image; You can make the screen switch between static and
active with this button; Pictures show as below:
Freeze Frame
Once gain for live
or
Live Frame
Once gain for live
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
32
7.2 How to control processor with console software by USB?
1. Install the driver;
Connect the USB cable to the PC and the video processor. Turn on the Enigma,
for the first time to use USB, the PC will remind finding the new hardware and
ask to install the driver for this new driver.
Install from the list or specified location, press “NEXT”:
Press “ browser” to find the driver, and press “NEXT”
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
33
When the installation fininsh, can go to check the installed COM port inside the
device mangement, as following picture show:
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
34
2. Install the console software, and run after install, shows the interface of the
console as following:
:Set the RS232 as installed just now, and set the Enigma Boud Rate to
be: 115200.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
35
Press
to start RS 232 communication, when there is green point in the
right down corner showing on the software, it means the communication is OK,
and you can use the software to control the device now; the software operation
is the same as VSP516, just can see the difference of the SDI input;
If power off during communication, should close the port
Note:
by
first, and plug in out of the USB and do communication
again.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
36
7.3 How to Use LINSN Ledset software?
1. First, Install ENIGMA software and LINSN software.
2. Run ENIGMA software;
①Press
to set the RS232. first choose the current RS232 you are using,
then set the baud rate.
Note:
Press
ENIGMA Baud Rate work as 115200.
to start the RJ232, when the green point showing on the right
down corner, it means the communication is successful.
Press
:option. Find the LINSN software installation file LEDSET.EXE
through “external progress route”as following picture:
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
37
As LINSN software will use RS232 for communication too, so user should first
close ENIGMA console software RS232 communication after that press
If in used
;
, then to start the LINSN software. When you want to use ENIGMA
software, you just need to close LINSN software, start the RS232
again.
Before using ENIGMA console software to execute the LINSN
Note::
software, you should first internally connect the device's 100M
board with sending card.
Any question, please feel free to contact our customer service
engineer.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
38
8.0 Appendix
8.1 AppendixⅠDownload the IP software
Turn off the power, take the two coding switch to “ON” sate. As below:
Connect one side of the RJ11 download line to the RS232 on the video processor,
and the other side to be connected to the serial port on the PC.
Double click
to run Flash Magic ,setting as below:
First, users can choose the right serial port, set the baud rate to 9600, choose
LPC2368,and to load the aim document (hex.document) of IP board upgrading.
Secondly, confirm the two option box by tick.
Finally, click the “Start” button.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
39
After download, exit the program, turn off the power, tack the two coding switch
back, as below, restart the equipment power, check if the equipment work
normally.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
40
8.2 Appendix Ⅱ How to add tasks.
Use “Device Schedule” can add tasks,make device automatically run to the
Schedule input source in specified time or schedule display modes such as fade
in and out.
z First of all,set lower computer current time through host computer “clock”.
Note:
Reset to factory settings after setting the clock will affect the
time before.
After Clock setting, users can check whether successfully set through button.
Press MENU button to enter system main menu, then press Dev Info (device
information), then press SEL button can show device information. Touch
/DOWN,check in the System time. Shown as below picture:
System time:
2009-08-17
z
15:12:35
After device clock set, add task plan through” Timing Parameters”.
1. Users need to start “time-enabled” before using” timing device”. If you
forget to start, time set may fail.
Click “start” button
, when the button changes to
, it means
time can start.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
41
Press MENU button can enter system main menu, touch UP/DOWN to enter
advanced menu, shown as the picture:
>ENIGMA
*Advance
↑
Press SEL button to enter advanced menu
Time:
Time Able
2. When the timer count is set to 1, it indicates that the setting contents will be
stored in the “timing 1”. If you need to set more, you can set up one by one and
saved in different “Timer index”.
Note:
Equipment currently supports 10 task scheduler.
3. Set “task schedule” playing time,can up to second.
4. Select the signal source to play works in dual channel or single channel mode,
and check whether to use fade during dual channel mode.
5. Users can control the image position and size by change the data or click the
drop-down arrow.
6. When device works under the single channel mode, click the interface Icon.
Red box indicates current interface has been selected as the input interface;
When device works under the dual channel mode, need to switch image 1 and
image 2 set input signal one by one.
Users can see the image 1 and image 2 input source information in the input
source toolbar after setting. Shown as the picture:
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
42
7. When you finished above step, click button
to finish adding” tasks
plan”.
Click button
,you can see the input source, playing time, image size,
position etc. of the current “tasks plan”
Users can see all the “tasks plan” relevant content through “Timer index”
switching
.
ENIGMA User Manual
Doc. No:RGB-RD-UM-V516E014
43
Open as PDF
Similar pages