nellcor™ oxiMax n-560 Pulse oximeter

OxiMax N-560 Pulse Oximeter
Puritan Bennett™
Monitor with confidence.
The Nellcor™ OxiMax N-560 pulse oximeter from Covidien is
a compact, affordable bedside monitor that delivers full-size
performance. It incorporates the latest Nellcor™ signal processing
technology for accurate, reliable SpO2 and pulse rate measurements
even in conditions of low perfusion and signal interference, including
patient motion. This technology, along with the full line of versatile
OxiMax sensors, allows clinicians to confidently and effectively
monitor a wide range of patients.
The LoSat expanded accuracy feature of our
OxiMax adhesive sensors assures you of a wide
accuracy range (60% to 100% SpO2) when used
with the Nellcor OxiMax N-560 pulse oximeter.
This allows improved patient assessment at the
more challenging lower saturation levels common in infants with congenital heart disease.
Sleek, simple design. The Nellcor OxiMax N-560 pulse oximeter is
smaller than most other standalone pulse oximeters and has a simple,
well-designed user interface that caregivers will be comfortable with.
Save time and space with this easy-to-use OxiMax pulse oximeter.
Nellcor™ OxiMax Sensor Advantages
As part of the Covidien Nellcor™ OxiMax pulse oximetry system, the OxiMax N-560 pulse oximeter works with the full line of
OxiMax sensors, which help expand your patient monitoring options.
• OxiMax SpO2 forehead sensor offers improved performance
when patients have low perfusion.
Nellcor™ OxiMax N-560 Pulse
Oximeter Features
Monitors neonates through adults.
Simple, intuitive operation and space-saving
The Covidien distinctive digital signal processing
technology enhances performance during low
perfusion, patient motion and other forms of
signal interference.
Variable pitch beep tone enables clinicians to
hear point-by-point changes in SpO2.
Display changes from green to red during alarms.
Features and specifications
2.95 H x 9.06 W x 5.04 D (inches)
Measurement range
1% to 100%
Pulse rate:
20 to 250 beats per minute (bpm)
Pulse amplitude:
0.03% to 20%
Saturation (% SpO2 ± 1 SD)
70% to 100% ± 2 digits
60% to 80% ± 3 digits
70% to 100% ± 2 digits
60% to 80% ± 4 digits
Eight-hour battery life.
24-hour trend memory.
• OxiMax nonadhesive sensors provide a gentle, singlepatient-use alternative to adhesive sensors for patients with
fragile skin.
Low perfusion:
70% to 100% ± 2 digits
Equipment compliance
IEC 60601-1
CSA 601.1
IS0 9919:2005
UL 2601-1
EN/IEC 60601-1-2 (2nd ed.)
Emissions compliance
EN55011, Group 1, Class B
EIA-232 digital output from serial port
OxiNet Communications Output Protocol
Nurse call capability
Optional paging system supplements bedside and
central station alarms to reduce response time.
Pulse rate
Integrated Score analysis functionality stream
lines in-hospital sleep screening.
High quality LED display changes from green to red during
alarm conditions.
Pulse amplitude indicator (10-segment LED).
Patient trend data can be stored on a USB drive
for archive and analysis.
Team up with telemetry
To enhance patient safety monitoring on your
general care floor, you can team OxiMax N-560
pulse oximeters at the bedside with the Covidien
cost-effective remote oximetry alarm systems or
connect them to nurse call systems.
Low perfusion:
20 to 250 bpm ± 3 digits
(7.5 cm x 23.0 cm x 12.8 cm)
20 to 250 bpm ± 3 digits
Power requirements:
100 to 240 VAC, 25 to 39 VA
Fuse rating:
Qty 2, 2A, 250 volts, slow-blow
IEC (5x20 mm)
Battery capacity:
Minimum of 8 hours using new, fully
charged battery with no alarms, no
serial data
Operating temperature
Adult specifications are shown for the OxiMax MAX-A and MAX-N
sensors with the OxiMax N-560 pulse oximeter. Neonate specifications are shown for MAX-N sensors with the OxiMax N-560 pulse
oximeter. Saturation accuracy will vary by sensor type. Refer to the
Nellcor™ Sensor Accuracy Grid Card for details. The low perfusion
specifications apply to monitor performance. Refer to the OxiMax
N-560 pulse oximeter operator’s manual for complete description,
instructions, warnings, cautions and specifications. Specifications
are subject to change without notice.
Visual indicators: Pulse search, audible alarms silenced or
off, interference indicator, battery charging, data in sensor
and Nellcor™ SatSeconds alarm management clock
Audible and visual alarms for high/low saturation and
pulse rate.
SatSeconds Alarm Management settings:
10, 25, 50 and 100, or OFF
Audible and visual warning indicators for low battery and
sensor off.
Audible sensor disconnect alarm.
10°C to 45°C
Optional accessories
Transport/Storage Temperature (in shipping carton):
GCX mounting adapter
-20°C to 70°C
Pole mount clamp
Operating Humidity:
15% to 95% noncondensing
Interface cables
Operating Altitude:
-1,280 ft to 18,288 ft
Visual alarm indicator antenna
Physical Characteristics
3.07 lb (1.39 kg)
COVIDIEN, COVIDIEN with logo, Covidien logo and positive results for life are
U.S. and internationally registered trademarks of Covidien AG. Other brands are
trademarks of a Covidien company. ©2006, 2011 Covidien. All rights reserved.
11-PM-0264 MN04806
6135 Gunbarrel Avenue
Boulder, CO
Open as PDF
Similar pages